Database Develop

[ROM][10][ARM64][J530] crDroid v6.21 for Galaxy J5 2017 - Pro [10.08.2021] - Samsung Galaxy J5 PRO (2017) ROMs, Kernels, Recove

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
Features (click here)
Screenshots in the next post.
Flashing Instructions:
Pre-installation & other downloads:
OrangeFox R11.0 (it's MANDATORY) - Download from here
AOSP Repartition script - Download from here
GApps: ARM64 > 10 > Pico - Download from here
Magisk 21.4 or newer for root - Download from here
Installation:
Enter to recovery mode and make a backup of your EFS & Modem (recommend).
Go to the Files tab and flash "Repart-AOSP10-exynos7870-20210810.zip". The recovery will auto-reboot.
Now, go to the Trash Bin and then go to the "Format data" tab, type yes and the tick to format data.
Go to the Wipe tab, select SYSTEM, CACHE, DALVIK, VENDOR, DATA and INTERNAL STORAGE, then swipe the bar.
Install the crDroidAndroid-10.0-xx-xx-v6.xx.zip
Install the GApps zip
Install Magisk (optional)
Reboot and wait. Without GApps, it boot in 15s. With Pico GApps, it boot on 1min 5s.
Done!
Download:
ROM: https://www.androidfilehost.com/?fid=7161016148664783751
Known issues:
- Frontal Flash
- Bluetooth Calls
- VoLTE (impossible on Samsung devices)
- Miracast
Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/samsungexynos7870/android_kernel_samsung_exynos7870/
ROM OS Version: Android 10
ROM Kernel: Linux 3.18

IMPORTANT, PLEASE READ THIS
This is a ROM built from source and not a GSI!​
Fix Camera stretch & force close for some camera apps
You can do it editing /vendor/build.prop file using MiXplorer (you’ll need ROOT).
Search for the line “vendor.camera.hal1.packagelist”
After the = are the name of different apps. Delete one of these and put the package name of the app that you want to fix. For example, com.facebook.orca is the Facebook package name.
Per default, the ROM comes with Whatsapp, ZOOM, Snapchat and Instagram added. Maximum 4 Apps are allowed in this line and must be separated by comma ",".
If you don’t understand, open this link to see visual steps.
Fix Camera stuck
Sometimes, the camera can get inaccessible if an app was failed. If it happen, follow this:
Install this app. Open it and tap "Kill camera", then give it ROOT permissions. Done! Camera is working again.
Take in mind that if the camera is broken and you didn't do this, the audio in calls maybe not work.
GCam
This ROM can run GCam. Download a modded version for Exynos HERE. Thanks to Leonardo Estacio for his mod.
Games: this ROM works so good for gaming and can run ARM64 apps/games. If you feel lags, go to Settings > Battery > Battery Saver and performance > Performance Profile and set it to High Performance.
Video Review: if you want to see gaming performance and how this ROM are, you can watch this review video of the ROM in the J7 2016 (the ROM is the same for other Exynos7870 variants):
For close, i want to give a huge thanks to @Astrako - Without him this ROM haven't be possible <3

Changelog:
android_vendor_crDroidOTA/changelog_j7xelte.txt at 10.0 · crdroidandroid/android_vendor_crDroidOTA
OTA configuration for crDroidOTA (make your device official) - android_vendor_crDroidOTA/changelog_j7xelte.txt at 10.0 · crdroidandroid/android_vendor_crDroidOTA
github.com
===== 10-08-2021 =====
- Update to crDroid 6.21 - August security patch
- Fixed SafetyNet attestation (enable Magisk Hide if Magisk is installed)
- ROM now fits on smaller system partitions [min 2,26GB]
- Bluetooth & Bluetooth Audio fixed (j5y17lte)
===== 17-04-2021 =====
- crDroid 6.17
- Fixed Live Display
- Added Night Light
- April Security Patch
- Deleted ConfigStore hal
===== 24-01-2021 =====
- Fixed offline charging
- Added vibration intensity control
- Latest crDroid sources (v6.14 with January security patch)
- Initial j5y17lte private build for testing

Can you please give a link to AreskernelV8.0?
The most recent I've found is AresKernel-V7.0-UNIVERSAL7870.zip, and the former AresKernel-V7.0-J530X-TREBLE.zip.
Kind regards
Edit: found. Never mind.

A really fast and beautiful Rom. Unfortunately I had to find out that the SIM card is not recognized no matter what I try. I tried version 6.12 and 6.15 and I couldn't use the SIM card on either of the two Roms. Too bad.
My device is the Galaxy SM-J530F (j5y17lte)

Hello,
very nice work, thanks.
Unfortunatly it is not possible to hear Audio over bluetooth.
Any idea?
Thanks

Hey cr droid 6.18 is released in may 2021 so how can you have a cr droid 6.18 ROM from 18 April 2021

justinh99 said:
Hey cr droid 6.18 is released in may 2021 so how can you have a cr droid 6.18 ROM from 18 April 2021
Click to expand...
Click to collapse
@GonicTEAM

perfect rom, one of the few that works on my j5 j530f

Everything works perfectly except one thing wifi issue on 6.21. when connect to mobile hotspot it works well when connect to router wifi connected but internet not working I tried everything but same issue with SM-J530F.

gmkhamisani786 said:
Everything works perfectly except one thing wifi issue on 6.21. when connect to mobile hotspot it works well when connect to router wifi connected but internet not working I tried everything but same issue with SM-J530F.
Click to expand...
Click to collapse

Hi, thanks for a great rom.
I cant use my ipods, BT does connect , no audio output.
Any fix to this ?
Battery does not charge the right way.
It only goes to 70%.
What kernel is recommended ?

I flashed this ROM but my SIM Card (both) aren't detected. Baseband and IMEI are reported unknown as well. I have restored previously backed Modem and EFS partition but still no luck. How do I fix this? Please help.
Edit: I revert it to stock and my SIM is working again it seems there is issue with the ROM.

Great ROM. until now no problems, since i dont use SIM card in this one anyways.

I tried to install this ROM, but the following error occured:
My devide is J530F
What is wrong?

GonicTEAM said:
IMPORTANT, PLEASE READ THIS
This is a ROM built from source and not a GSI!​
Fix Camera stretch & force close for some camera apps
You can do it editing /vendor/build.prop file using MiXplorer (you’ll need ROOT).
Search for the line “vendor.camera.hal1.packagelist”
After the = are the name of different apps. Delete one of these and put the package name of the app that you want to fix. For example, com.facebook.orca is the Facebook package name.
Per default, the ROM comes with Whatsapp, ZOOM, Snapchat and Instagram added. Maximum 4 Apps are allowed in this line and must be separated by comma ",".
If you don’t understand, open this link to see visual steps.
Fix Camera stuck
Sometimes, the camera can get inaccessible if an app was failed. If it happen, follow this:
Install this app. Open it and tap "Kill camera", then give it ROOT permissions. Done! Camera is working again.
Take in mind that if the camera is broken and you didn't do this, the audio in calls maybe not work.
GCam
This ROM can run GCam. Download a modded version for Exynos HERE. Thanks to Leonardo Estacio for his mod.
Games: this ROM works so good for gaming and can run ARM64 apps/games. If you feel lags, go to Settings > Battery > Battery Saver and performance > Performance Profile and set it to High Performance.
Video Review: if you want to see gaming performance and how this ROM are, you can watch this review video of the ROM in the J7 2016 (the ROM is the same for other Exynos7870 variants):
For close, i want to give a huge thanks to @Astrako - Without him this ROM haven't be possible <3
Click to expand...
Click to collapse
Good morning warriors, can anyone help me? I installed this rom, it was great, but when it turns off and locks the screen it takes a while to turn on the screen, it only presses the home key several times, if anyone can help me, thank you.

I have problem with sim card in slot 2, When someone calls me they can't hear me, I can hear them for 5 seconds and then I can't hear any sounds and they can't too

Med0x said:
I have problem with sim card in slot 2, When someone calls me they can't hear me, I can hear them for 5 seconds and then I can't hear any sounds and they can't too
Click to expand...
Click to collapse
SIM2 Calling Bug work around (by kamran4malik2) :
You will face the calling issue with SIM2 every time you restart your device so to fix this issue just make a phone call from your SIM1 to any number (even if you don't have balance) then SIM2 calling issue will be fixed until you restart your phone again. ( Repeat the process every time your restart your phone )

I know I'm a little off-topic, but I don't have any more ideas.
If I understood it correctly, I need to install TWRP on my J5 to afterward install OrangeFox.
But if I see it correctly with Android 9 on an J5 there is no freaking button to get oem unlock.
So therefore I can't install twrp or anything else using odin.

Related

###
### Attention
###
We got 5z custom rom src that from 5z-dev recently, So I decided to discontinue GSI rom build.
I made this decision because GSI cannot be more perfect than the usual Custom Rom.
Thank all of you for using my GSI rom and I wish I could visit another building.
#####################################################
I don't have permission of writing in development thread,
so I post it in here :crying:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Check this Thread
https://forum.xda-developers.com/zenfone-5z/development/rom-havoc-os-v2-7-2019-07-13-t3948096
You can also download it through this link.
===== Download =====
### GoogleDrive
[url]https://drive.google.com/open?id=1aUhz-5dzI2ab73mdmUnf6xlihX2WVmqY
[/URL]
<See Havoc GSI for Zenfone 5z (Discontinued)>
I build Havoc GSI for Zenfone 5z and please test it.
Please check changelog for detail.
I tested in .58 stock vendor.
===== Download =====
### GoogleDrive
[url]https://drive.google.com/open?id=1LvXv2iwB3UwTHYX3oSqLeXAg1PMU60lo[/URL]
### AndroidFileHost
[url]https://www.androidfilehost.com/?w=files&flid=294395[/URL]
===================
I include magisk patched boot.img (v19.0&v19.2&19.3) , vbmeta.img, persist.img file for .58
(not tested in .72 vendor)
Q. How to install it?
A. Check this thread.
[url]https://forum.xda-developers.com/zenfone-5z/how-to/flashing-efrans-oem-framework-gsis-t3913452[/URL]
and you don't have to patch for vendor or volte.
just flash it!
===================
- Initial build : 190502
- Initial release : 190519
- currrent : 190616
- Builder : XHINM
- device : Zenfone 5z (GSI)
====================
###
### ZS620KL Changlog [190603 GMT+09]
###
# 190616
- update lastest havoc source [190612]
=> android-9.0.0_r42
=> Havoc OS v2.6
- force enable fingerprint sensor service on background
=> maybe it can fix no response when device goes deep sleep
=> but have to test
- enable aux (wide-angle) function in AsusCamera
- fix AsusCamera crash issue
- fix storage problem in Snap Camera
- rework mediaprofile library
=> rework 18x9_1080p and lpcm
- fix an issue that could not play flac files in havoc
- revert media steps (100 -> 15)
- change default jpeg quality (85 -> 100)
# 190530
- update lastest havoc source [190530]
- enable FM Radio
=> remain mediaroute problem (headphone & speacker) : fix
=> initial volume has max
- enable 4k recording in AsusCamera
=> add lpcm in mediaprofile
=> add 18x9_1080p profile in mediapropfile
=> wide angle problem
- lightservice
- add face unlock (from Gapps)
=> thanks for Hamzain!
=> Settings -> Security and Location -> SmartLock -> Trusted face
# Previous Changelog
# 190520
- change display cutout value from stock [190519]
# 190519 (Initial Build)
- solve bootloop/SystemUI crash problem [190515]
- remove vendor mismatch check [190516]
- support Asus texfat (UTF8) [190518]
- solve bluetooth in call & audio problem [190518]
- make order of system icons correctly [190518]
- set default setting for Zenfone 5z [190518] - source from 90.11.162.58
- set default status bar pdding : 8dp
- change media step : 100
- support VOLTE
- change bluetooth default name : Zenfone 5z (Z01R)
- change fingerprint/model for pass safetynet (from .58)
- support AsusCamera (not perfect)
# credit
* phhusson
* AndroPlus
* Havoc OS
* lineage OS
And all treble developers
# credit
* 5z-Dev Team (https://github.com/5z-devs)
* Specially Rohan/Jack/adeveloper79/tarkzim
* Havoc OS (https://github.com/Havoc-OS)
* lineage OS
And all 5z developers with testers

Wow. Nice one! Thank you for contributing for our beloved phone?

Screenshot
[Will be updated]

Thanks a lot man..!!!
Respect.

Super smooth experience bro. Superb performance too. Just what I had been waiting for. Excellent job on the Bluetooth man. THank for your time and work.

Thanks for your hard work. Really appreciated. I have a doubt. Does work the wide angle camera??
Thank you in advance!!

Superb ROM man!
Very smooth, VoLTE, Bluetooth and tons and tons of customisations..!!
By far the most excited thread in the forum.
Also I like the 'Screen Stability' in Havoc Settings.

serpico84 said:
Thanks for your hard work. Really appreciated. I have a doubt. Does work the wide angle camera??
Thank you in advance!!
Click to expand...
Click to collapse
wide angle/4k recording doesn't support now.
I will try to fix it.

To get face unlock:
1. Download the zip from here : https://www.mediafire.com/file/f464ujbdxab5swm/Face+unlock.zip
2. Extract.
3. Copy 'apps' folder to system>apps
4. Copy 'lib' folder to system>lib
5. Copy 'lib64' folder to system>lib64
6. Set the permissions of all the files to 'rw-r-r'
7. Reboot
I used ES File Explorer, you can use any Root Explorer.
I have extracted the libs and APK from the latest GApps package.

great work man.
Sent from my Asus Zenfone 5Z using XDA Labs

First of all, thanks for this. This is working flawless. ROM is clean and has tons of customization options. Couple of things i have to mention after initial use.
1. Struggled account sign into youtube vanced, due to chrome being a system app. Just remove chrome from system app and install android system webview version 70.xxx as workaround.
2. Camera seems a step down from stock, trying to find a better alternative. Please help if you know any.
3. It is not mentioned in description but minimal gapps for device setup are already include in the system image.
4. Saftynet check pass successfully.
Will be using this as daily driver. Thanks again.
Edit: facing an issue with fingerprint, whenever phone enters deep sleep, fingerprint sensor stops working. I can wake up by hitting power button and then its back to normal. Not sure if i have faulty hardware or some cache issue but i am able to replicate it and it was not same on stock.

Please upload review on YouTube and share the link

acelover said:
First of all, thanks for this. This is working flawless. ROM is clean and has tons of customization options. Couple of things i have to mention after initial use.
1. Struggled account sign into youtube vanced, due to chrome being a system app. Just remove chrome from system app and install android system webview version 70.xxx as workaround.
2. Camera seems a step down from stock, trying to find a better alternative. Please help if you know any.
3. It is not mentioned in description but minimal gapps for device setup are already include in the system image.
4. Saftynet check pass successfully.
Will be using this as daily driver. Thanks again.
Edit: facing an issue with fingerprint, whenever phone enters deep sleep, fingerprint sensor stops working. I can wake up by hitting power button and then its back to normal. Not sure if i have faulty hardware or some cache issue but i am able to replicate it and it was not same on stock.
Click to expand...
Click to collapse
Can you try the asus rog camera port it might function in this custom rom

acelover said:
First of all, thanks for this. This is working flawless. ROM is clean and has tons of customization options. Couple of things i have to mention after initial use.
1. Struggled account sign into youtube vanced, due to chrome being a system app. Just remove chrome from system app and install android system webview version 70.xxx as workaround.
2. Camera seems a step down from stock, trying to find a better alternative. Please help if you know any.
3. It is not mentioned in description but minimal gapps for device setup are already include in the system image.
4. Saftynet check pass successfully.
Will be using this as daily driver. Thanks again.
Edit: facing an issue with fingerprint, whenever phone enters deep sleep, fingerprint sensor stops working. I can wake up by hitting power button and then its back to normal. Not sure if i have faulty hardware or some cache issue but i am able to replicate it and it was not same on stock.
Click to expand...
Click to collapse
You're right. There's a problem with fingerprint recognition.

kv_1122 said:
Can you try the asus rog camera port it might function in this custom rom
Click to expand...
Click to collapse
Asus camera app is already built into this ROM and for me it works same as stock. In my earlier post i was referring to second ( aosp maybe?) camera app which is not as smooth as expected.
If you want me to try any specific version of asus pixelmaster let me know. I will be trying some other gcams as an alternative to aosp cam.
Thanks.
---------- Post added at 09:21 PM ---------- Previous post was at 09:19 PM ----------
XHICHI said:
You're right. There's a problem with fingerprint recognition.
Click to expand...
Click to collapse
Thanks for confirming, it is not a deal breaker for me.

Flash this over evolution x gsi, you wont have issues with fingerprint.

Can I dirt flash this over stock rom? I really don't want to wipe everything...

T_ReKT said:
Can I dirt flash this over stock rom? I really don't want to wipe everything...
Click to expand...
Click to collapse
flashing custom rom gona wipe your data.
all you can do is use migrate or titanium backups to backup all your apps and data. or take nand backup on nandroid app. then just one tap restore it..
Sent from my Asus Zenfone 5Z using XDA Labs

XHICHI said:
You're right. There's a problem with fingerprint recognition.
Click to expand...
Click to collapse
I don't have any FP issue.
I flashed it over stock .58 firmware.
---------- Post added at 10:40 AM ---------- Previous post was at 10:14 AM ----------
imuneer8 said:
Please upload review on YouTube and share the link
Click to expand...
Click to collapse
The video is already up.
Here :

For who are facing FP no working...reflash .58 firmware and flash back FP will working again...just a small problem...have some Hi-Res song unable to play

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Nokia 7 Plus [Onyx]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 10.0
Whats working?
Ril
Wifi
Mobile data
Double tap to wake
Double tap to sleep
Adaptive brightness
Dark theme
Ambient display
Flash light
Sound / vibration
Camera
Volte
Selinux - Enforcing
Fingerprint
Known issues
All fixed for now . comment below if you face any bugs
DON'T FLASH GAPPS, ALREADY INCLUDED
Installation procedure
Note - I don't recommend you people to flash any other custom kernels on this ROM .
Click Here for Installation process
Credits
* Thanks to my Contributor Hritik utekar who supported from back and worked hard to get this brand new OTA Updater application.
* Pixel Experience & CO (For Source Code)
* All the authors in my git sources
* Nokia For Prebuilt Vendor , Pie Kernel Source & Q beta prebuilt kernel
* Moderators (For Giving Freedom To Post Threads)
​
Download Rom
Download Official Twrp
Android OS version: 10.0.0_r41
Security patch level: August 2020
Build author: Raghu varma
My build script: https://github.com/RaghuVarma331/scripts
Kernel Source code: https://github.com/RaghuVarma331/android_kernel_nokia_sdm660
Source code: https://github.com/PixelExperience
ROM Developer: jhenrique09
​

screenshots

Pixel experience Q beta initial build is Up
For Nokia 7 Plus
Code - Onyx
Changelog
1. Initial Q beta build
2. Based on Q beta vendor.img
3. System blobs from 4040
4. October security patch
5. Selinux - enforcing
6. for Installation procedure go through installation section once

Hi dev, thanks for your work. I had two major problems when testing this build.
1. Connected bluetooth headset doesn't play sound. I tried Sony WH-1000XM3, which shows LDAC with no sound, and OnePlus bullet wireless 2, which should use aptx-HD but seems using SBC and also no sound.
2. The default launcher shows the app you choose to hide, which is as same as the HMD internal build 4040.

Mr_404 said:
Hi dev, thanks for your work. I had two major problems when testing this build.
1. Connected bluetooth headset doesn't play sound. I tried Sony WH-1000XM3, which shows LDAC with no sound, and OnePlus bullet wireless 2, which should use aptx-HD but seems using SBC and also no sound.
2. The default launcher shows the app you choose to hide, which is as same as the HMD internal build 4040.
Click to expand...
Click to collapse
because we used prebuilt hmd-vendor.img from 4040 as you mentioned.
once after stable release i will replace with stable vendor.img
reason behind this is without Q vendor.img and Q kernel we can boot but 50% of the rom is buggy so i used beta Q vendor & kernel to make rom stable as soon as possible some how this is just initial build. 99% rom is fine 1% belongs to new bugs which you people comment below here

Raghu varma said:
because we used prebuilt hmd-vendor.img from 4040 as you mentioned.
once after stable release i will replace with stable vendor.img
reason behind this is without Q vendor.img and Q kernel we can boot but 50% of the rom is buggy so i used beta Q vendor & kernel to make rom stable as soon as possible some how this is just initial build. 99% rom is fine 1% belongs to new bugs which you people comment below here
Click to expand...
Click to collapse
OK, thanks for the info

Mr_404 said:
Hi dev, thanks for your work. I had two major problems when testing this build.
1. Connected bluetooth headset doesn't play sound. I tried Sony WH-1000XM3, which shows LDAC with no sound, and OnePlus bullet wireless 2, which should use aptx-HD but seems using SBC and also no sound.
2. The default launcher shows the app you choose to hide, which is as same as the HMD internal build 4040.
Click to expand...
Click to collapse
meaning that i won1t be able to play music and send/receive calls through my car's bluetooth?

Play store app not installing

bharath moram said:
Play store app not installing
Click to expand...
Click to collapse
Man gapps already included huh :/ read thread properly

donjamal said:
meaning that i won1t be able to play music and send/receive calls through my car's bluetooth?
Click to expand...
Click to collapse
I can receive the calls voice, but music

thank you for the effort, i have flashed the rom. i have below questions to post:
1. the rom does not support hot-plug of SIM, whenever i plugin my sim card , reboot is needed.
2.after flashed the rom, i could not receive or send any msg (service provider is 'China Telecom'), but when i plugin another SIM card(China Unicom) ,i can send or receive msg. i need to plugin both SIM cards to activate msg function, then i can use my china telecom card.
3. when i press power button to wake my device, the animation will pop from the bottom left of screen, will be a little stuck, top screen and right screen will be black. after about 0.1s , it will back to normal

sensenshibendan said:
thank you for the effort, i have flashed the rom. i have below questions to post:
1. the rom does not support hot-plug of SIM, whenever i plugin my sim card , reboot is needed.
2.after flashed the rom, i could not receive or send any msg (service provider is 'China Telecom'), but when i plugin another SIM card(China Unicom) ,i can send or receive msg. i need to plugin both SIM cards to activate msg function, then i can use my china telecom card.
3. when i press power button to wake my device, the animation will pop from the bottom left of screen, will be a little stuck, top screen and right screen will be black. after about 0.1s , it will back to normal
Click to expand...
Click to collapse
Same to you, and Can you open NFC?

sensenshibendan said:
thank you for the effort, i have flashed the rom. i have below questions to post:
1. the rom does not support hot-plug of SIM, whenever i plugin my sim card , reboot is needed.
2.after flashed the rom, i could not receive or send any msg (service provider is 'China Telecom'), but when i plugin another SIM card(China Unicom) ,i can send or receive msg. i need to plugin both SIM cards to activate msg function, then i can use my china telecom card.
3. when i press power button to wake my device, the animation will pop from the bottom left of screen, will be a little stuck, top screen and right screen will be black. after about 0.1s , it will back to normal
Click to expand...
Click to collapse
i agree with your points. well having some issues from rom sources side and device sources side too they are still in beta stage and iam still in initial stage. can we expect some time? Mr. mate?

Thanks for the reply bro, sure I have plenty of time to wait and try your excellent ROM. I am looking forward to your update ?

I just installed the rom.its smooth and the battery seems fine to me (will update if I see problems.) When you wake the phone the wallpaper goes from the bottom right and it's kinda glitchy.The sim card is a bit finiky as well as once I rebooted I lost access to my sim card and I could only get it back if I put the sim tray out of the phone and rebooted while putting it back in. Everything else seems to work ok at the moment.
I did have a problem installing though as when I switched slots to install the kernel it brought me to stock recovery and when I switched slots to go back to twrp it froze so I had to boot twrp from download mode and install from there.
My model is Ta 1055 (single sim) and it does thinks it's a dual SIM.
Thanks a lot for the ROM, you are a real help for the Nokia 7 plus community and I appreciate the effort you put into these ROMs and recoverys!

Raghu varma said:
i agree with your points. well having some issues from rom sources side and device sources side too they are still in beta stage and iam still in initial stage. can we expect some time? Mr. mate?
Click to expand...
Click to collapse
Haven't tried the roms but thank you very much for keeping this sub alive!!!

mikie_kelly said:
I just installed the rom.its smooth and the battery seems fine to me (will update if I see problems.) When you wake the phone the wallpaper goes from the bottom right and it's kinda glitchy.The sim card is a bit finiky as well as once I rebooted I lost access to my sim card and I could only get it back if I put the sim tray out of the phone and rebooted while putting it back in. Everything else seems to work ok at the moment.
I did have a problem installing though as when I switched slots to install the kernel it brought me to stock recovery and when I switched slots to go back to twrp it froze so I had to boot twrp from download mode and install from there.
My model is Ta 1055 (single sim) and it does thinks it's a dual SIM.
Thanks a lot for the ROM, you are a real help for the Nokia 7 plus community and I appreciate the effort you put into these ROMs and recoverys!
Click to expand...
Click to collapse
well wallpaper glitch & stuff is from rom source side. hehe even i sawn that bug in redmi note 7 pro & remdi note 5 pro too. so comming to the kernel flashing & stuff ? after flashing rom.zip change to alternative slot & reboot to bootloader and boot in to twrp again and now flash kernel.zip and wipe everythin except system & vendor & reboot system
make sure you are using mine official twrp from official twrp thread .

Raghu varma said:
well wallpaper glitch & stuff is from rom source side. hehe even i sawn that bug in redmi note 7 pro & remdi note 5 pro too. so comming to the kernel flashing & stuff ? after flashing rom.zip change to alternative slot & reboot to bootloader and boot in to twrp again and now flash kernel.zip and wipe everythin except system & vendor & reboot system
make sure you are using mine official twrp from official twrp thread .
Click to expand...
Click to collapse
I am using your build when i installed your twrp using the installer I only did it once and not on the two slots. Was I supposed to do it twice for each slot?

Could you share screenshots of the camera app? Is the Nokia Camera App included?

This needs unlocked bootloader ???

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Changelog
- Initial crDroid 6.7 code
- June Security Patch
- Added OOS style notification dismiss button
- Added toggle to disable sensor usage for some apps
- Added option for brightness slider in QuickQS panel
- Added 6 new clock styles
- Fixed disappearing date section on custom clock in some cases
- Improvements for weather on lockscreen
- Fixed Android crash with RGB wallpaper
- Added new font - Accuratist
- Added new and working stock calendar app
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/10.0/README.mkdn
Flashing Instructions:
Pre-installation:
Recovery (Download from here)
gapps (Download from here)
Magisk 20.0 or newer for root (after first boot) - (Download from here)
First time installation:
Reboot to recovery
Normal 5 wipes
Again reboot to recovery
Flash ROM and gapps
(Optional) Flash magisk
Reboot to system
Update installation:
Reboot to recovery
Normal wipes (exclude internal and data)
Again reboot to recovery
Flash rom and gapps
(Optional) Flash magisk
Reboot to system
Sources:
ROM: https://github.com/crdroidandroid
Kernel: kernel url
Download:
ROM https://crdroid.net/rolex
Changelog: https://raw.githubusercontent.com/crdroidandroid/android_vendor_crDroidOTA/10.0/changelog_rolex.txt
Visit official website @ crDroid.net
crDroid Community Telegram
Donate to help our team pay server costs
Support device maintainer
XDA:DevDB Information
CrDroid, ROM for the Xiaomi Redmi 4a
Contributors
adi153
ROM OS Version: Android 10
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: 6.7
Stable Release Date: 2020-06-07
Created 2020-01-06
Last Updated 2020-06-07

Device time changes to incorrect after rebooting,
Plz add double tap to ambient display feature in next update

Installed last night. Running smooth and stable. Performance is great. Only problem I've noticed is the camera won't save to SD card. Any quick fix for that? Please let me know. Thanks! Great work!

digidad said:
Installed last night. Running smooth and stable. Performance is great. Only problem I've noticed is the camera won't save to SD card. Any quick fix for that? Please let me know. Thanks! Great work!
Click to expand...
Click to collapse
The camera does actually save to SD card, but it goes to a very strange destination, if you go to your SD card > Android > data then you'll find a folder called org.lineageos.snap, in that folder (when you've taken a photo) you'll find a folder named files and in that folder you'll find your photo. I've tried many things to try to direct my photos to my SD card and then to the camera folder, but never had any luck. I just leave at phone storage then move them to SD card > camera using my gallery app.

Paul T said:
The camera does actually save to SD card, but it goes to a very strange destination, if you go to your SD card > Android > data then you'll find a folder called org.lineageos.snap, in that folder (when you've taken a photo) you'll find a folder named files and in that folder you'll find your photo. I've tried many things to try to direct my photos to my SD card and then to the camera folder, but never had any luck. I just leave at phone storage then move them to SD card > camera using my gallery app.
Click to expand...
Click to collapse
Is there a way to make the Gallery app display photos from this location (org.lineageos.snap)?

digidad said:
Is there a way to make the Gallery app display photos from this location (org.lineageos.snap)?
Click to expand...
Click to collapse
I'm using simple gallery pro and it does allow you to include 'other' folders to display. I've just tested it and set the camera to save to SD card then SGP has in it's setting to manage included folders, which you can then point it to org.lineageos.snap

Paul T said:
I'm using simple gallery pro and it does allow you to include 'other' folders to display. I've just tested it and set the camera to save to SD card then SGP has in it's setting to manage included folders, which you can then point it to org.lineageos.snap
Click to expand...
Click to collapse
Thanks, That worked as an option.
The thread below suggests that this is fixed in the newest Lineageos 16.0 builds. Pictures will be shown in Gallery stored in Android/data/org.lineageos.snap/files
https://gitlab.com/LineageOS/issues/android/issues/268

wasay.65 said:
Have you flashed the Pixel launcher addon?.When i flash pixel launcher the other launcher don't work.
I tried the rom. It is great. Also adoptable storage worked after 4 tries. However, i think that the battery and the time logo in the status bar are too much near the end of display. Is there any option to move them a little away from the screen border.
Click to expand...
Click to collapse
I haven't tried Pixel launcher addon. The status bar is fully customizable in the CrDroid settings.

digidad said:
I haven't tried Pixel launcher addon. The status bar is fully customizable in the CrDroid settings.
Click to expand...
Click to collapse
OK. Anyways i have flashed the pixel launcher cuz i didn't like the stock launcher. It is working fine. Why is it in beta state, everything is fine till now. I would say it is better stable then PE.

wasay.65 said:
OK. Anyways i have flashed the pixel launcher cuz i didn't like the stock launcher. It is working fine. Why is it in beta state, everything is fine till now. I would say it is better stable then PE.
Click to expand...
Click to collapse
I agree - not sure why it is Beta status. I have less issues with this ROM so far than PE9 (which I previously thought was pretty great). With PE9, I had very slow download speeds and would often need to reboot my phone to 'automatically' rejoin a saved Wifi network. CrDroid seems pretty solid - especially for a 10 ROM. :good: :good:

Anyone notice the volume with bluetooth speaker. I have kept it an seven steps. On the third step, the volume is like 40% and on the fourth step it is 80%. I have tried 15 steps and the same result. On the fith and above the audio is too luod on my headphones.

A few qustions:
1. Can i dirty flash the new update Found it in the main post
2. I have adoptable storage. Does dirty flash damage adoptable storage.
3. What are the steps for dirty flash. Do gapps remain after dirty flash.
Thanks in advance

See comments on 6.0 thread. Several have reported issues with networking including WiFi, Data and Bluetooth not working after installing 6.2. Caution advised.

digidad said:
See comments on 6.0 thread. Several have reported issues with networking including WiFi, Data and Bluetooth not working after installing 6.2. Caution advised.
Click to expand...
Click to collapse
Is the WiFi working now on the 01-13 update (dirty flash)? Also OP why are there 3 separate threads for the same ROM lol

WiFi is working fine. I was on 1/3 build and updated using the 'check for updates' feature which reboots to TWRP. I guess that would be a 'dirty flash'.

Help
Wrong Thread

wasay.65 said:
Hello. Unfortunately my redmi 4a screen broke. But touch is working fine. Only some cracks. Should i leave it like that or replace my screen. If possible can i put on a screen protector. I know its out of topic but please help.
Click to expand...
Click to collapse
I don't know about where you live, but here it would probably cost around the same to repair as it would to purchase another used phone with better specs.
If you really want a Redmi 4A, eBay might be an option. For example: https://www.ebay.com/itm/Xiaomi-Red...rbished-Smartphone-2-16GB-3-32GB/184083855252

DELETED

Fast charge is not working.

Fast charging problem and it is using 90% of the storage on my 16gb model

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
Features (click here)
Screenshots in the next post.
Flashing Instructions:
Pre-installation & other downloads:
OrangeFox R11.0 (it's MANDATORY) - Download from here
AOSP Repartition script - Download from here
GApps: ARM64 > 10 > Pico - Download from here
Magisk 21.4 or newer for root - Download from here
Installation:
Enter to recovery mode and make a backup of your EFS & Modem (recommend).
Go to the Files tab and flash "Repart-AOSP10-exynos7870-20210810.zip". The recovery will auto-reboot.
Now, go to the Trash Bin and then go to the "Format data" tab, type yes and the tick to format data.
Go to the Wipe tab, select SYSTEM, CACHE, DALVIK, VENDOR, DATA and INTERNAL STORAGE, then swipe the bar.
Install the crDroidAndroid-10.0-xx-xx-v6.xx.zip
Install the GApps zip
Install Magisk (optional)
Reboot and wait. Without GApps, it boot in 15s. With Pico GApps, it boot on 1min 5s.
Done!
Download:
ROM: https://www.androidfilehost.com/?fid=7161016148664783862
Known issues:
- Frontal camera stretched for some apps (Instagram, ZOOM and Snapchat & Whatsapp except videocalls don't have this problem). See second post for more info.
- Frontal Flash
- Bluetooth Calls
- VoLTE
Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/samsungexynos7870/android_kernel_samsung_exynos7870/
ROM OS Version: Android 10
ROM Kernel: Linux 3.18

IMPORTANT, PLEASE READ THIS
This is a ROM built from source and not a GSI!​
Fix Camera stretch & force close for some camera apps
You can do it editing /vendor/build.prop file using MiXplorer (you’ll need ROOT).
Search for the line “vendor.camera.hal1.packagelist”
After the = are the name of different apps. Delete one of these and put the package name of the app that you want to fix. For example, com.facebook.orca is the Facebook package name.
Per default, the ROM comes with Whatsapp, ZOOM, Snapchat and Instagram added. Maximum 4 Apps are allowed in this line and must be separated by comma ",".
If you don’t understand, open this link to see visual steps.
Fix Camera stuck
Sometimes, the camera can get inaccessible if an app was failed. If it happen, follow this:
Install this app. Open it and tap "Kill camera", then give it ROOT permissions. Done! Camera is working again.
Take in mind that if the camera is broken and you didn't do this, the audio in calls maybe not work.
GCam
This ROM can run GCam. Download a modded version for Exynos HERE. Thanks to Leonardo Estacio for his mod.
Games: this ROM works so good for gaming and can run ARM64 apps/games. If you feel lags, go to Settings > Battery > Battery Saver and performance > Performance Profile and set it to High Performance.
Video Review: if you want to see gaming performance and how this ROM are, you can watch this review video of the ROM in the J7 2016 (the ROM is the same for other Exynos7870 variants):
For close, i want to give a huge thanks to @Astrako - Without him this ROM haven't be possible <3
Also a huge thanks to Peter Schiek for his €50 donation

Changelog:
android_vendor_crDroidOTA/changelog_j7xelte.txt at 10.0 · crdroidandroid/android_vendor_crDroidOTA
OTA configuration for crDroidOTA (make your device official) - android_vendor_crDroidOTA/changelog_j7xelte.txt at 10.0 · crdroidandroid/android_vendor_crDroidOTA
github.com
===== 17-04-2021 =====
- crDroid 6.17
- Fixed Live Display
- Added Night Light
- April Security Patch
- Deleted ConfigStore hal
===== 11-02-2021 =====
- crDroid 6.15 build
- Repartition script updated. Now you can get more userdata space.
- XDA release build
===== 24-01-2021 =====
- Fixed offline charging
- Added vibration intensity control
- Latest crDroid sources (v6.14 with January security patch)
- Initial a3y17lte private build for testing

GonicTEAM said:
Fix Camera stuck
Sometimes, the camera can get inaccessible if an app was failed. If it happen, follow this:
Install this app. Open it and tap "Kill camera", then give it ROOT permissions. Done! Camera is working again.
Click to expand...
Click to collapse
Thanks for your build.
Do you use LineageOS tree for A3 2017 by Martin (@Sap1k) ? Because it doesnt have the problem with camera.
Also crDroid 6.9 by Atrasko doesnt have this problem too. But since 6.12, there is this problem with camera.

Very nice to see a new ROM for the A3.
Did anyone test if bluetooth calls are working correctly and if recorded videos with apps other than Footej, are saved correctly?

SuperDeformed86 said:
Thanks for your build.
Do you use LineageOS tree for A3 2017 by Martin (@Sap1k) ? Because it doesnt have the problem with camera.
Also crDroid 6.9 by Atrasko doesnt have this problem too. But since 6.12, there is this problem with camera.
Click to expand...
Click to collapse
I use Astrako's device trees for crDroid, not LineageOS ones. I will see what was change, thanks!

What is the differenc beetween crdroid 6.15 and crdroid 6.9?

hi,
nice job. The ROM doesn't detect my SIM CARD. How to fix that point? Thanks for any help.

Can i use Twrp to flash this Rom and the cr droid partitionierer

Is adoptable storage something that works on this ROM? The tiny 16GB of internal storage are crippling this otherwise still capable device...

Crim Soukyuu said:
Is adoptable storage something that works on this ROM? The tiny 16GB of internal storage are crippling this otherwise still capable device...
Click to expand...
Click to collapse
It does say in the first page that BT calling is still broken in this ROM.
crDroid is awesome on this phone but the lack of BT calling sucks and I don't think there is developer motivation to fix.

nonsub said:
It does say in the first page that BT calling is still broken in this ROM.
crDroid is awesome on this phone but the lack of BT calling sucks and I don't think there is developer motivation to fix.
Click to expand...
Click to collapse
That's good to know, but I didn't ask about BT...

Hello, on my A3 2017 (a3y17lte), when install crdroid, it says:
Code:
updater process ended with error7
error installing zip file '/external-sdcard/crDroidAndroid-10.0-20210211-a3y17lte-v6.15.zip'
this is with last twrp, because with your orangeFox, i can't intall it, because it is for j7y17lte

yeye.phone said:
Hello, on my A3 2017 (a3y17lte), when install crdroid, it says:
Code:
updater process ended with error7
error installing zip file '/external-sdcard/crDroidAndroid-10.0-20210211-a3y17lte-v6.15.zip'
this is with last twrp, because with your orangeFox, i can't intall it, because it is for j7y17lte
Click to expand...
Click to collapse
It should work with this orangefox.
[OFFICIAL][TWRP][A320FL/F/Y] OrangeFox Recovery Project [R11.0]
DISCLAIMER I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it...
forum.xda-developers.com

LuChaos said:
It should work with this orangefox.
[OFFICIAL][TWRP][A320FL/F/Y] OrangeFox Recovery Project [R11.0]
DISCLAIMER I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it...
forum.xda-developers.com
Click to expand...
Click to collapse
Ok i will try with this Version.I think it's better suited.

isaacragui said:
hi,
nice job. The ROM doesn't detect my SIM CARD. How to fix that point? Thanks for any help.
Click to expand...
Click to collapse
same here...any solutions? Tried different SIM cards and flashed ROM 2-3 times

Cheers @GonicTEAM,
Thanks for the crDroid release, hope to see more updates to this rom.
Tested the rom on a SM-A320F/DS, can confirm what other users have mentioned above, and some others:
SIM slots dont work, tested both slots. Ive added a logcat to the post. SDcard (SIM2 slot) works fine, no issue there.
Settings > Display > LiveDisplay: Cant edit the settings for bluelight filter.
Settings > Display > Lock screen display > Ambient display: To edit Ambient display settings this way does not work, either nothing happens or it jumps back to Display settings. To edit Ambient display settings, have to go through -> Settings > crDroid Settings > User Interface (tab) > Ambient display. Not a huge issue, just fyi.
Camera works fine with the native app, I use OpenCamera though and with the build.prop edit mentioned in 2nd post it works without issue.
Bluetooth/NFC seem to work, though I havent tested in depth due to sim issue.
Wifi works fine aswell, only annoyance is after reboot sometimes aireplane mode is activated and wifi off, even though it was on before reboot. But thats a small issue, not priority.
Phone encryption working aswell, no issue there as far as i can see.
Battery, havent tested per usual usage, though it does drain faster at first look.
Best regards and lookin forward to future releases,
yass

yass said:
Cheers @GonicTEAM,
Thanks for the crDroid release, hope to see more updates to this rom.
...
Click to expand...
Click to collapse
Thanks for the feedback. I don't have this device, but i compile the ROM anyway using the Astrako's device trees. I will try to fix this things if i can.

SuperDeformed86 said:
Thanks for your build.
Do you use LineageOS tree for A3 2017 by Martin (@Sap1k) ? Because it doesnt have the problem with camera.
Also crDroid 6.9 by Atrasko doesnt have this problem too. But since 6.12, there is this problem with camera.
Click to expand...
Click to collapse
GonicTEAM said:
I use Astrako's device trees for crDroid, not LineageOS ones. I will see what was change, thanks!
Click to expand...
Click to collapse
Please dont use this device tree from martin .This Device Tree have the Problem that adobtabel storage dont work
This is very bad for this device because it have only 16gb internal storage

Crim Soukyuu said:
Is adoptable storage something that works on this ROM? The tiny 16GB of internal storage are crippling this otherwise still capable device...
Click to expand...
Click to collapse
my english is not so good
Yes it works but it was disabeld but you can enabeled it with a few commands
1.enabeled devolper options (tap 5 times on build number)
2.enabeled usb-debuging in devolper options
3.install minimal adb and fasboot on your pc
4.start minimal adb and fastboot
5.type adb devices and type yes on the prompt on your phone
6.type adb shell
7.type sm set-force-adoptable true
8.go to setting/storage/sdcard/format as internal storage

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer​We are not responsable of any problems caused by root like tripped knox... When you flash something like this you may know about the risks you are going to find in!
Always backup your phone before and after flashing TWRP custom recovery:
In TWRP press BACKUP and select:
System Image, Vendor Image, Boot Image, Data, Baseband and EFS
and save your backup in your Internal Storage.
Description​
SM-N96xF/FD/N, SM-G96xF/FD/N supported. Only Exynos, no Snapdragon support.
Based on official OneUI 5.1 S20 + N10Lite with June's Security Patches.
All OneUI 5 stuffs have been ported successfully
Odexed, Hardly Debloated and added some tweaks for best performance and better battery.
Added some tweaks in order to have the best smoothness and general performance!
Make your ROM! OUR aroma allows you to select everything you want to have on your phone in order to improve the user experience!
Remappable Bixby Button
Disabled RMM Lock.
Google Pay working (Hide it with Magisk)
Secure Folder working
Photo Remaster, Object Eraser and Extra Dim available
Improved zoom quality in gallery
Useful cards tab enabled in messages
Night mode zoom on camera.
Night mode on hyperlapse.
Enabled Dolby on Game.
Power key in notification panel.
Samsung App Lock.
iOS 16 Emoji's selectable in aroma.
And much more, don't worry if the rom size is big, it contains all you need .
Known Bugs​
Spoiler: BUGS LIST
NOBLE 3.0 BUGS LIST
How to Install​
Spoiler: Follow these steps carefully! Repartition needed if you have never done that!
TWRP 3.7.0_9-0
0. Make a Backup of EFS and of all your stuffs before proceeding
1. Open TWRP by pressing volume up+ bixby + power buttons
2. Press on "Install" and select Universal9810_Repartitioner https://forum.xda-developers.com/attachments/universal9810_repartitioner-zip.5816841/
3. Reboot to TWRP
4. Press on "Wipe" and select "Format Data" then type "yes"
5. Reboot again to TWRP
6. Press on "Install" and select Universal9810_Cleaner https://forum.xda-developers.com/attachments/universal9810_cleaner-zip.5809289/
7. Reboot again to TWRP
8. Press "Install" and select NOBLEROM zip
9. Follow AROMA instruction and at the end of installation, reboot
10. Enjoy Noble ROM
Download Here​
Spoiler: OneUI 5
NOBLE ROM 3.5 SCILLA
Spoiler: OneUI 4.1
NOBLE ROM 2.B
Spoiler: Kernel Sources
KERNEL SOURCES
Join the Community​
Spoiler: Telegram Channel
Noble ROM Channel
Updates' Notifications, Bugs Fixes, Informations, Comunications and ALL YOU NEED for the best Noble ROM's experience!
t.me
Spoiler: Telegram Group
Alexis in S9-S9+ and Note9 Noble ROM
⚠️⚠️RULES⚠️⚠️ 1- Only Noble ROM support. 2- Only English allowed 3- Don't talk about other Roms 4- Don't go off topic 5- Don't ask for ETA 6- Respect other members
t.me
Follow me on​
Spoiler: Instagram
Instagram
Create an account or log in to Instagram - A simple, fun & creative way to capture, edit & share photos, videos & messages with friends & family.
www.instagram.com
Spoiler: Twitter
https://twitter.com/AlexisDevXDA?s=09
Spoiler: Facebook
Accedi a Facebook
Accedi a Facebook per iniziare a condividere contenuti e connetterti con i tuoi amici, la famiglia e le persone che conosci.
it-it.facebook.com
Support Noble ROM​
Spoiler: Donate on PayPal
Pay Alexander Rubino using PayPal.Me
Go to paypal.me/AlexisXDA and type in the amount. Since it’s PayPal, it's easy and secure. Don’t have a PayPal account? No worries.
paypal.me

RESERVED #1

Looking forward to the first public release! :-D

AlexisXDA said:
For STARTERS is important to select NO DEBLOAT option
Click to expand...
Click to collapse
Is there any problem with Advanced Debloat, or is it only recommendation for users with no experience?

Congrats...
Looking forward to trying out the rom
Thanks

For everyone, who wonders how to pass SafetyNet, can check this post. It worked for me, but it's not like in One UI 2.5 with WW kernel. Yes, you will pass it, yes apps will run. But Netflix quality is pretty bad and bank apps don't work with a fingerprint. However, the room seems very smooth and stable <3
[NOBLE ROM 3.4 SERRA OneUI 5.1 FULL PORT][05/23 Patches][19/05/2023][SM-N960F/FD/N--SM-G96xF/FD/N]
Disclaimer We are not responsable of any problems caused by root like tripped knox... When you flash something like this you may know about the risks you are going to find in! Always backup your phone before and after flashing TWRP custom...
forum.xda-developers.com

twrp 3.3.1.1 or 3.3.1.0...?
because here in guide at xda recommendation is twrp 3.3.1.1,
while at Alex insta page, at graphically demo its recommended twrp is 3.3.1.0.
so which version exactly to follow.?

After following three times the installation process as mentioned in the original post my device keeps crashing. The home screen starts blinking black, does not respond to touch, and after a few seconds the message "System UI isn't responding" appears.
I will try to debug through ADB if i'm able to enable developer options first.
Thank you so much for your effort.
Device: G960F
Installation: TWRP 3.3.1.1 - No debloat - Clean install (format then wipe)
Edit: I've seen in the Note9 thread there is a kernel fix for the S9, i will install it and give report.
Edit2: Ok, everything working perfectly after flashing the kernel

Does '2. Home Button pressure is not fully supported since S10/N10' mean unlock the device by pressing the 'invisible" homebutton is not existing/working?

PcO7 said:
Does '2. Home Button pressure is not fully supported since S10/N10' mean unlock the device by pressing the 'invisible" homebutton is not existing/working?
Click to expand...
Click to collapse
Just, do not rely on this button. Feels like is working when u are on aod screen.

1. AOD screen always shows text "Charging" next to the battery percentage, even though it is not charging atm.
2. Controlling USB mode (which side is controller, data, charging only etc.) is not working at all. Only in Developer's options
3. Android Auto is not working as well
4. Universal SafetyNet Fix works, but fingerprint doesn't work (not even with modded modules for Samsung)
On the other hand, Wireless DeX on PC is working

neth15 said:
1. AOD screen always shows text "Charging" next to the battery percentage, even though it is not charging atm.
2. Controlling USB mode (which side is controller, data, charging only etc.) is not working at all. Only in Developer's options
3. Android Auto is not working as well
4. Universal SafetyNet Fix works, but fingerprint doesn't work (not even with modded modules for Samsung)
On the other hand, Wireless DeX on PC is working
Click to expand...
Click to collapse
Android Auto is working fine for me, I just had to install it from the store
Edit: It worked in my car but not in my friends car, weird

neth15 said:
1. AOD screen always shows text "Charging" next to the battery percentage, even though it is not charging atm.
2. Controlling USB mode (which side is controller, data, charging only etc.) is not working at all. Only in Developer's options
3. Android Auto is not working as well
4. Universal SafetyNet Fix works, but fingerprint doesn't work (not even with modded modules for Samsung)
On the other hand, Wireless DeX on PC is working
Click to expand...
Click to collapse
other than this I also found that Mobile Network Data Usage on settings are force closing when I tap it. Also it shows blank "data usage" the notification panel

I confirm, Android Auto is not working

I forgot another thing: I can't see Revolut app in the Play Store at all. It even failed to install from cloud backup. (MagiskHide+renamed Magisk+Universal SafetyNet Fix)

I'm using G965N. My carrier is KT(Korea Telecom).
I heard that there's no Korea CSC in this rom.
What CSC should I have to choose?

Hello. Thank you. I'll tell you what I mean. I have a phone that is bought in installments. The previous owner stopped paying in installments, the telephone number in the contract is off. The phone can be locked when it resets to factory settings and reconnects with KNOX. KNOX GAURD can lock my phone programmatically and it will be KG state locked. I want to protect myself from this and load the soft that is decnoxed. Does your soft fulfill this function. Thank you for your answer, good man.

No root?

Hi @AlexisXDA
I have install the rom with advanced debloat on S9+
In camera app, i don't have any "portait" mode.
I miss something ?
Thanks

Hello, I'm using this rom since it came out and I have just one problem
The sound of the speakers is a bit muffled and Dolby Atmos seems not to work.
However, I'm really impressed of how well the Port works.