{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (pie), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What works:
Calls/SMS/Mobile data
Wifi
Bluetooth
GPS
Camera
Audio
FM radio
WLAN and USB tethering
Broken
You tell me
Source code:
device : https://github.com/lenovo-devs/android_device_lenovo_TBX304, https://github.com/lenovo-devs/android_device_lenovo_tb-common/tree/lineage-17.1-msm8937
kernel: https://github.com/lenovo-devs/android_kernel_lenovo_msm8953/tree/lineage-17.1-tbx304
vendor: https://github.com/lenovo-devs/proprietary_vendor_lenovo/tree/lineage-17.1-msm8937
2021-04-08
Initial release
Fixed fast charger and OTG
Fixed touchscreen issues
mailru: lineage-17.1-20210408-UNOFFICIAL-TBX304.zip
gdrive: lineage-17.1-20210408-UNOFFICIAL-TBX304.zip
Previous versions:
How to install
You have to had TWRP installed from this thread TWRP and ROOT for Tab 4 8/10 (Plus) (TB-8704X/F/V,TB-X704L/F, TB-8504X/F, TB-X304L/F or one from link below
In TWRP clean Data if you coming from stock ROM and do Install of this ROM. If you have android 8 stock rom installed you have to format Data with data loss, because used encryption is incompatible with android 7.1
TWRP
Built from omnirom android 9.0 source (twrp 3.4.0), includes same kernel as Lineage build, with support for pstore (kernel logs after crash), exfat, ntfs, reboot to EDL mode.
mailru: tbx304-twrp-3.4.0-20201207.img
gdrive: tbx304-twrp-3.4.0-20201207.img
XDA:DevDB Information
[ROM][UNOFFICIAL][10.0][tbx304f/l/x] LineageOS 17.1 for Lenovo TAB4 8, ROM for the Lenovo Thinkpad Tablet
Contributors
highwaystar_ru
Source Code: https://github.com/lenovo-devs/android_kernel_lenovo_msm8953/tree/lineage-17.1-tbx304
ROM OS Version: 10.x
ROM Kernel: Linux 3.10.x
Based On: LineageOs
Version Information
Status: Testing
I Tried this rom , I would say it is the best rom available because A10 .
I would recommend this rom for sure , it is very stable , everything works just fine !!
It has been 4-5 hrs since i flashed and have gone through every setting in the rom and found no bug ! (except double tap to wake does not work)
Love you developer for your work ♥
Great job, thanks to the author. Everything works really well.
Thanks a lot for the ROM and all your hard work..
you are keeping the tab alive..
@highwaystar_ru just curious to know, if u have merged some changes from the source code that lenovo released lately..
Does this work on the tab4 10??
Review after 20 days.
The ROM is smoother than LOS16.
Idle drain has reduced a lot.
Few minor bugs (in bt and few apps) that were in LOS16 are also fixed.
Best rom that keeps my tab good as new.
Thanks a lot...
.
I can't get it to flash. TWRP has been sitting for hours at:
Unmounting System...
Target: Lenovo/LenovoTB-X304:/X304L:8.1.0/0PM1.171019029/S001017_190709_ROW:user/release-keys
EDIT: Fixed by flashing TWRP instead of just booting it. The steps I followed were:
Install the Lenovo Driver from here
Install fastboot and adb on your PC, e.g. from here
Enable developer options and in there select to unlock your bootloader by enabling OEM unlock and enable USB debugging
Connect your PC to your tablet and run
Code:
adb reboot bootloader
using adb on command line. The tablet will reboot into bootloader mode where you will only see the text on the screen. Now you use
Code:
fastboot oem unlock-go
to unlock. This will factory reset your device
Setup the tablet again, enable USB debugging, and reboot again to the bootloader
Download tbx304-twrp-3.4.0-20201207.img (TWRP) from the OP
Then run
Code:
fastboot boot tbx304-twrp-3.4.0-20201207.img
to temporarily boot into TWRP.
Select to keep system read only when TWRP starts to avoid modification which will make OTAs impossible
In TWRP, go to WIPE, click on "Format Data" in the lower right, and follow the instructions.
Go back to the TWRP home screen, choose "Reboot", and click "Recovery"
In TWRP, go to the Backup tab, and backup the boot, recovery, and system image. Keep this backup for OTA updates.
Go back to the TWRP home screen, hit the reboot button in TWRP, and choose "Bootloader".
Then run
Code:
fastboot flash recovery tbx304-twrp-3.4.0-20201207.img
to permanently install TWRP.
Once installed, press the volume button until it says "Recovery Mode" in red letters on the top, then hit the power button to boot back into TWRP.
Load the LineageOS zip file from your computer onto the tabled by using
Code:
adb push [NAME_OF_LINEAGE_ZIP_FILE] /sdcard/
. If you are going to install gapps (Google Play Store, etc.), download it from here and push it to the tablet the same way
From the TWRP home screen, go to Install and install the LineageOS zip file. Once that is completed, repeat the process to install gapps, if you're using them.
Select the option to reboot. If everything worked correctly, it should boot into LineageOS.
This says tab4 8... Does this work for the tab4 10 model tb-x304f ?
Aphixy said:
This says tab4 8... Does this work for the tab4 10 model tb-x304f ?
Click to expand...
Click to collapse
Maybe it's a typo...
I am using this on x304f (wifi only) tab. It's smooth and stable
hk96 said:
Maybe it's a typo...
I am using this on x304f (wifi only) tab. It's smooth and stable
Click to expand...
Click to collapse
You're using this on the tab4 10?
Aphixy said:
You're using this on the tab4 10?
Click to expand...
Click to collapse
Yes
hk96 said:
Yes
Click to expand...
Click to collapse
Hey so I sent you a private message
Thank you for this amazing rom. Working perfectly in my Lenovo Tab4 10 TB-X304L and also call and everything is working but call are not that stable....anyway thank you very much.
Amazing ROM so far. Thank you very much for working on custom roms for our old tablet.
Has anyone experienced issues with the Dual Shock 4? It doesn't work at all. In the previous ROM (16) there was a known kernel issue which prevented the mapping from working. Now, it is connecting (even tried with an USB cable OTG) but only for charging. Weird. An old Afterglow X1 works like a charm, though---without even using 1Controller addon for Magisk.
Any help is appreciated.
On X304L working very well Great work
ahecht said:
I can't get it to flash. TWRP has been sitting for hours at:
EDIT: Fixed by flashing TWRP instead of just booting it. The steps I followed were:
Click to expand...
Click to collapse
Wasted lots of time until I found your reply - installed this on a 4 10, works like a charm. Thanks @highwaystar_ru and @ahecht! You rock!
Is there a chance we will see 18.1 on these devices soon, and maybe have them officially supported?
Any way I can help?
I've got decades of Linux experience, but not as a dev, and flashing Android devices is rather new for me...
Hello
I have installed the 17.1 rom but I am stuck on the first boot at the LOS boot logo (6 hours..)
Any idea why?
I have a X304X (not very commom but very close to X304L or F)
Thanks
NightCode7 said:
Thank you for this amazing rom. Working perfectly in my Lenovo Tab4 10 TB-X304L and also call and everything is working but call are not that stable....anyway thank you very much.
Click to expand...
Click to collapse
Hey I have a request. So if you have got the twrp file of the Lenovo Tab 4 10 TB-X304L could you please share it as everything i found on the internet doesnt work..
Thanks and is the rom stable for the tab?
.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is an Unofficial builds for Xperia Tablet Z LTE/Wi-Fi.
About ROM
LineageOS is a free, community built, aftermarket firmware distribution of Android 8.x (Oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
The source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Installation
Download the latest build
Place ROM in your SD card or Internal Storage
Reboot into recovery mode
Full wipe and factory reset (recommended)
Flash ROM
Reboot
Downloads
Pollux: AFH
Pollux_windy: AFHRecommended Recovery (optional)
TWRP 3.2.xGapps (optional)
OpenGapps (ARM/Android-8.x): http://opengapps.orgSources
LineageOS on Github
Kernel: apq8064
XDA:DevDB Information
LineageOS 15.1 for the Sony Xperia Tablet Z, ROM for the Sony Xperia Tablet Z
Contributors
CaHbKaUp, CyberWalkMaN, Daedroza, Chippa_a, AdrianDC
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Stable Release Date: 2019-06-17
Created 2018-01-15
Last Updated 2019-06-17
lineage microg 15.1
Since this is a thread about unofficial lineage 15.1,
I will mention that pollux received unofficial lineage 15.1 with security_patch=2020-08-05
https://download.lineage.microg.org/pollux/
https://download.lineage.microg.org/pollux_windy/
ze7zez said:
Since this is a thread about unofficial lineage 15.1,
I will mention that pollux received unofficial lineage 15.1 with security_patch=2020-08-05
https://download.lineage.microg.org/pollux/
https://download.lineage.microg.org/pollux_windy/
Click to expand...
Click to collapse
Could I flash this over my current LineageOS 15.1 of @CaHbKaUp (without a factory reset)?
someone8 said:
Could I flash this over my current LineageOS 15.1 of @CaHbKaUp (without a factory reset)?
Click to expand...
Click to collapse
Both ROMs are not signed so no migration is necessary.
Backup in twrp and then wipe the caches and system.
Do not wipe the data.
reserved
reserved
Thanks for this ROM, amazing that I now have android 8.1 on this device. Only issue I can see is that OpenGapps doesn't yet support 8.1 so flashing older versions (at least when I tried 8.0) results in an error
This GApps pkg is for Android 8.0.x only, Please download the correct version for your ROM 8.1.0 (SDK 27)
Click to expand...
Click to collapse
Bojanglez said:
Thanks for this ROM, amazing that I now have android 8.1 on this device. Only issue I can see is that OpenGapps doesn't yet support 8.1 so flashing older versions (at least when I tried 8.0) results in an error
Click to expand...
Click to collapse
I have found this: https://forum.xda-developers.com/redmi-note-3/development/gapps-opengapps-t3720449
Have not yet tried updating. Perhaps you could give it a try and let us know...
botsaris said:
I have found this: https://forum.xda-developers.com/redmi-note-3/development/gapps-opengapps-t3720449
Have not yet tried updating. Perhaps you could give it a try and let us know...
Click to expand...
Click to collapse
Yes, this will successfully be installed, but will work after you flash this https://www.androidfilehost.com/?fid=817906626617958577
Yeah it is all working nicely now. Once again thanks for getting it out there, can't believe my 5 year old Tablet Z has Oreo before my Galaxy S8 .
Damn, my root is gone and i cant boot into recovery. Vol Down and Power Button doenst work, it directly boots the lineage 8.1. Any Help? Thanks alot !
Edit: got recovery by Terminal. When i get my root back, then i will be happy
Edit 2: Have Root again, SuperSU, everything works, will test now. Thanks all for your amazing Work!
cannot boot to recovery --power +volume down didn't work anymore ..i need to boot to recovery to install supersu... pleaae help
risant said:
cannot boot to recovery --power +volume down didn't work anymore ..i need to boot to recovery to install supersu... pleaae help
Click to expand...
Click to collapse
Activate and open the Developer Settings, tick on the Terminal. Then type into the Terminal "reboot recovery", maybe you need before to type in "su". Then you hopefully can boot into your Recovery and get SuperSU.
I also cannot boot to Recovery by pressing Vol down and Power. After i flashed SU, i installed a Root App for booting to Recovery. This Solution is actually the best.
I typed reboot recovery at terminal the command cannot be found
risant said:
I typed reboot recovery at terminal the command cannot be found
Click to expand...
Click to collapse
su *enter*
reboot recovery *enter*
The only bug in this unit is charging - you cannot charge the unit when it's turned off ..wifi,bluetooth is ok ,..sometimes video glitch..any fixes for next update
risant said:
The only bug in this unit is charging - you cannot charge the unit when it's turned off ..
Click to expand...
Click to collapse
A bug with your unit or this Rom?
this rom... no problem with lineage 14.1.....this is just a minor bug
thank You! I've been waiting from december for this, enter to this forum time to time, my tablet its gonna be so happy...
First thanks a lot for the effort!
I tried the new 15.1 build, it looks great, the only bug I recognized is ghost touches. So if I use the screen keyboard suddenly it's gone because of a ghost touch to a different screen region.
There's a developer option to show fingertipps on the screen so I can see that there's touches on parts of the screen where there are in fact none.
I don't have this behavior with lineage 14.1. on the same device (flashed back and forth between the versions).
Also there's an option to set the touch reaction time to "long" but that didn't fully solve the problem.
Thank you Very much! Great work!!
lineagefan123 said:
First thanks a lot for the effort!
I tried the new 15.1 build, it looks great, the only bug I recognized is ghost touches. So if I use the screen keyboard suddenly it's gone because of a ghost touch to a different screen region.
There's a developer option to show fingertipps on the screen so I can see that there's touches on parts of the screen where there are in fact none.
I don't have this behavior with lineage 14.1. on the same device (flashed back and forth between the versions).
Also there's an option to set the touch reaction time to "long" but that didn't fully solve the problem.
Click to expand...
Click to collapse
I don't have this issue, Pollux Windy ROM.
risant said:
cannot boot to recovery --power +volume down didn't work anymore ..i need to boot to recovery to install supersu... pleaae help
Click to expand...
Click to collapse
hi guys, I'm new here ...great forum, great knowledge
i would ask, if that is a general problem with the recovery.
i had an crash, don't know why, and had to reflash the tablet. so recovery via terminal was not possible.
is power +volume down now working? i would like to test that image.
thanks for help and answer ...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 8 (oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What works:
Calls/SMS/Mobile data
Wifi
Bluetooth
GPS
Camera
Audio
FM radio
Torchlight
USB and WLAN tethering
Broken
You tell me
Source code:
device : https://github.com/HighwayStar/android_device_lenovo_TB8703/tree/lineage-15.1
kernel: https://github.com/HighwayStar/android_kernel_lenovo_msm8953/tree/lineage-15.1-common
vendor: https://github.com/HighwayStar/android_vendor_lenovo_TB8703/tree/lineage-15.1
2018-09-26
Updated audio configs
Updated mount options for /data partition, should increase performance and prolong flash life
Added missing powerhint.xml, should improve powersave in idle mode and more performance in demanding apps.
mailru: lineage-15.1-20180926-UNOFFICIAL-TB8703.zip
gdrive: lineage-15.1-20180926-UNOFFICIAL-TB8703.zip
Previous versions:
2018-08-26
Updated kernel
Added support for exfat sd cards
mailru: lineage-15.1-20180826-UNOFFICIAL-TB8703.zip
gdrive: lineage-15.1-20180826-UNOFFICIAL-TB8703.zip
2018-08-25
Fixed long time to wakeup screen
mailru: lineage-15.1-20180825-UNOFFICIAL-TB8703.zip
gdrive: lineage-15.1-20180825-UNOFFICIAL-TB8703.zip
2018-08-24
Fixed system crash when using WiFi hotspot mode
Updated Lineage code
mailru: lineage-15.1-20180824-UNOFFICIAL-TB8703.zip
gdrive: lineage-15.1-20180824-UNOFFICIAL-TB8703.zip
2018-08-18
Fixed MAC and long time to enable Wifi
Fixed MAC and long time to enable Bluetooth
Fixed calling with BT headset
Fixed Buttons settings
Partially fixed LED
mailru: lineage-15.1-20180818-UNOFFICIAL-TB8703.zip
gdrive: lineage-15.1-20180818-UNOFFICIAL-TB8703.zip
2018-08-16
Initial release
Full sources published
mailru: lineage-15.1-20180816-UNOFFICIAL-TB8703.zip
gdrive: lineage-15.1-20180816-UNOFFICIAL-TB8703.zip
How to install
To install this you have to install TWRP using by QFIL utility, follow this instruction: https://forum.xda-developers.com/general/general/twrp-lenovo-p8-tb-8703f-tb-8703x-t3689442/post76277192
Special TWRP build
To install and boot any custom roms and to boot it after installing mods that change boot partitition like Magisk please use this TWRP:
2018-08-25
Fixed long time to wakeup screen in TWRP
Added NTFS filesystem for sdcards
mailru: twrp-tb8703-3.2.1-20180825-bootsign.img
gdrive: twrp-tb8703-3.2.1-20180825-bootsign.img
Previous version
[*] Первая версия
mailru: twrp-tb8703-3.2.1-bootsign.img
gdrive: twrp-tb8703-3.2.1-bootsign.img
This TWRP build has special function Sign boot which you have to click after install new version of ROM or mod like Magisk. It will append stock boot signature to your boot partition. This allows to boot with locked bootloader.
TWRP with Boot Sign function screenshots:
Fortunately you dont need to unlock bootloader, because not every Lenovo tab can be unlocked. Custom kernel and ROM can be runned by appending boot.sig signature extracted from stock rom to boot.img like
Code:
cat boot.img boot.sig > boot-signed.img
It still cant be loaded by fastboot, but you always can flash it from TWRP. You can get boot.sig in my repo https://github.com/HighwayStar/android_device_lenovo_TB8703/blob/cm-14.1/twrp/recovery/root/boot.sig
XDA:DevDB Information
[ROM][UNOFFICIAL][8.1.0][tb8703f/x/r/n] LineageOS 15.1 for Lenovo TAB 3 8 plus P8, ROM for the Lenovo Thinkpad Tablet
Contributors
highwaystar_ru
Source Code: https://github.com/HighwayStar/android_kernel_lenovo_msm8953/tree/lineage-15.1-common
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
Based On: LineageOs
Version Information
Status: Testing
Created 2018-08-16
Last Updated 2018-09-26
You're rock, thanks. If you give for us custom kernel with overclock, the community will aprecciate. Thanks Sir for your hard work here.
---------- Post added at 02:19 PM ---------- Previous post was at 02:17 PM ----------
One bug I found on LOS 14.1, please look at topic from LOS 14.1, and you will see.
8703F
Hotspot doesn't work. I can turn it on but my computer and phone don't see the network; if I turn it on-off-on it causes the tablet to crash into a soft restart. It will then show 'Error'. There is no 5GHZ option when creating a hotspot. I posted this in the other thread aswell.
System/Buttons/Show arrow keys while typing doesn't work in landscape mode. They will appear in the middle of the navigation bar on top of the circle and will make the nav bar unusable.
I don't know if this is a feature, but in landscape mode if I swipe from the right end of the screen towards the center the status bar drops down.
boom! Legend! Thankyou SO much!
@highwaystar_ru has twrp been updated in OP?
I have twrp-tb8703-3.2.1-bootsign.img and cannot mount SD card
Awesome! Can't wait to flash this, gonna be so much better than Lenovo's bloatstock (and more up to date than my phone's LineageOS, to boot)
Lineage 15.1 updated
2018-08-18
Fixed MAC and long time to enable Wifi
Fixed MAC and long time to enable Bluetooth
Fixed calling with BT headset
Fixed Buttons settings
Partially fixed LED
Awesome! Thanks for the great effort!
LOS15.1 works perfectly:good: (18/8 version)
The only problem which I can find is gapp camera's shutter button shift down to the home button bar, half of the shutter button is hided.:fingers-crossed:
I get
"updater process ended with ERROR: 7
Error installing zip file "xxxxxxxxxx"
I was coming from the your 14.1 ROM - latest update from August. did a full wipe beforehand... made no difference.
Tried to dowload the file from both g-drive and mailru .. same result..
any ideas?
lu99ke said:
I get
"updater process ended with ERROR: 7
Error installing zip file "xxxxxxxxxx"
I was coming from the your 14.1 ROM - latest update from August. did a full wipe beforehand... made no difference.
Tried to dowload the file from both g-drive and mailru .. same result..
any ideas?
Click to expand...
Click to collapse
post /tmp/recovery.log
@lu99ke
sign boot from twrp
lineage 15.1 for lenovo yoga tab 3 plus please
I finally install Lineage OS in My Tablet. I try to install gapps version 8.1.0 ARM 64 from opengapps and then sign the boot partition after flash the gapps. System boots normally but gapps crashes constantly. Any gapps working? Or any information about how to install correctly gapps. Thanks.
**Update**
I just Wipe Data and then sign boot again. Then I configure my device and Now is Working with the Whole Google Apps and is now Android 8.1.0. Thanks for the developer for the Rom
Thanks a lot for your work on this ROM!
I've had exactly same experience with gapps crashing (MindTheGapps-8.1.0-arm64-20180223_195845.zip) as maikalex96 above. Wipe fixed the problem. Not feeling adventurous enough to try Open gapps yet.
good:
usual stuff works
WiFi 5GHz works
WiDi / Miracast, Chromecast works
Apk installations/updates are lightning fast compared to 6.0.1 stock
not so good:
bluetooth (albeit disabled) drains battery like crazy in standby - either that or andriod battery stats are not working right (WLAN, display items are not even listed)
no Dolby Atmos in LOS
some useful features removed in Oreo (google seem to be dumbing the system down) - no more WiFi band option (2.4/5), no more WiFi in standby option (on, off, charger on)
not a fan of some Oreo or LOS aesthetics
sound is not routed back to speakers after disconnecting headphones (not always)
not sure about performance, stock 6.0.1 might be a tad more responsive (touch, scrolling)
untested:
phone, lte data
sd card
That's on tb8703x.
highwaystar_ru said:
post /tmp/recovery.log
Click to expand...
Click to collapse
here it is..
*** Update****
So I just realised I hadn't updated TWRP to the new boot-signed version.
It won't let me do flash that via fastboot as it says " FAILED (remote: Partition flashing is not allowed " - I assume this is because my bootloader is not unlocked.
I did try using 'fasboot oem unlock" but that does not work.
I tried to use QFIL to flash the updated TWRP but it won't recognise the device on any port as obviously it is not going into stock recovery when - it is going into TWRP...
Any other ideas?
Any help is most appreciated - many thanks in advance.
*******Update #2*****
Thanks to WBN1 as below, all sorted and installed - many thanks!
Will let you know how it goes!
Many thanks again for all your hard work!
flash the updated twrp from within the old twrp. you need to tap on image when flashing so it can see the twrp.img file
wbn1 said:
flash the updated twrp from withing the old twrp. you need to tap on image when flashing so it can see the twrp.img file
Click to expand...
Click to collapse
Doh!! Lol.. I did try doing it through TWRP but didn't select image as you say!! What a doofus I am !!
Thankyou soooo much!!
Hey there, great ROM! Everything works good here. I only have one question, not directly about the ROM itself... but does anyone know if there is a version of the LOS 14.1 Trebuchet Launcher for using under LOS 15.1 ? I realy hate that new Launcher!
@highwaystar_ru i will try 3 things if i find some free time and sorry i didn't jump sooner on board.
1. Port AOSP Extended to this beauty https://www.aospextended.com/
2. Try to get an official xda forum for this tablet
3. Help you out with PR's in developing.
Great job you have done so far kudos mate.
Congratulations on the job.
any way to use otg and power at the same time? want to use the tablet in the car you need to have the power connected as well as the easycam with the recoil camera
thanks a lot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What works:
Calls/SMS/Mobile data
Wifi
Bluetooth
GPS
Camera
Audio
FM radio
Torchlight
USB and WLAN tethering
Broken
You tell me
Source code:
device : https://github.com/lenovo-devs/android_device_lenovo_TB8703
device tb-comon https://github.com/lenovo-devs/android_device_lenovo_tb-common
kernel: https://github.com/lenovo-devs/android_kernel_lenovo_msm8953
vendor: https://github.com/lenovo-devs/proprietary_vendor_lenovo
2020-09-06
Updated lineage code
Fixed FM radio
dpm daemon disabled for wifi version, hope this will resolve issues with wifi only tablet version (please report, I dont have wifi version to test)
mailru: lineage-17.1-20200906-UNOFFICIAL-TB8703.zip
gdrive: lineage-17.1-20200906-UNOFFICIAL-TB8703.zip
2020-06-01
Fixed boot on 8703f (wifi tablet version)
mailru: lineage-17.1-20200601-UNOFFICIAL-TB8703.zip
gdrive: lineage-17.1-20200601-UNOFFICIAL-TB8703.zip
Previous versions:
2020-05-31
Updated Lineage code
Updated system graphics and media binaries
selinux enforcing
mailru: lineage-17.1-20200531-UNOFFICIAL-TB8703.zip
gdrive: lineage-17.1-20200531-UNOFFICIAL-TB8703.zip
2020-03-31
Fixed boot issue on TB8703F (Wifi only version)
mailru: lineage-17.1-20200331-UNOFFICIAL-TB8703.zip
gdrive: lineage-17.1-20200331-UNOFFICIAL-TB8703.zip
2020-03-29
Fixed error message on boot on WiFi only tablet
Fixed issues with WiFi and Bluetooth MAC addresses
fixed other minor issues
Updated Lineage code
mailru: lineage-17.1-20200329-UNOFFICIAL-TB8703.zip
gdrive: lineage-17.1-20200329-UNOFFICIAL-TB8703.zip
2020-02-22
Initial release
mailru: lineage-17.1-20200222-UNOFFICIAL-TB8703.zip
gdrive: lineage-17.1-20200222-UNOFFICIAL-TB8703.zip
How to install
To install this you have to install TWRP using by QFIL utility, follow this instruction: https://forum.xda-developers.com/general/general/twrp-lenovo-p8-tb-8703f-tb-8703x-t3689442/post76277192
Special TWRP build
To install and boot any custom roms and to boot it after installing mods that change boot partitition like Magisk please use this TWRP:
2018-08-25
Fixed long time to wakeup screen in TWRP
Added NTFS filesystem for sdcards
mailru: twrp-tb8703-3.2.1-20180825-bootsign.img
gdrive: twrp-tb8703-3.2.1-20180825-bootsign.img
Previous version
[*] Первая версия
mailru: twrp-tb8703-3.2.1-bootsign.img
gdrive: twrp-tb8703-3.2.1-bootsign.img
This TWRP build has special function Sign boot which you have to click after install new version of ROM or mod like Magisk. It will append stock boot signature to your boot partition. This allows to boot with locked bootloader.
TWRP with Boot Sign function screenshots:
Fortunately you dont need to unlock bootloader, because not every Lenovo tab can be unlocked. Custom kernel and ROM can be runned by appending boot.sig signature extracted from stock rom to boot.img like
Code:
cat boot.img boot.sig > boot-signed.img
It still cant be loaded by fastboot, but you always can flash it from TWRP. You can get boot.sig in my repo https://github.com/HighwayStar/android_device_lenovo_TB8703/blob/cm-14.1/twrp/recovery/root/boot.sig
XDA:DevDB Information
[ROM][UNOFFICIAL][10.0][tb8703f/x/r/n] LineageOS 17.1 for Lenovo TAB 3 8 plus P8, ROM for the Lenovo Thinkpad Tablet
Contributors
highwaystar_ru
Source Code: https://github.com/lenovo-devs/android_kernel_lenovo_msm8953
ROM OS Version: Android 10
ROM Kernel: Linux 3.10.x
Based On: LineageOs
Version Information
Status: Testing
Created 2020-02-22
Last Updated 2020-03-31
Just installed it. Upon boot, a message poped up saying there's an internal error in the device, and that I should contact the maker (Lenovo). The message appeared once more before setup. Let's see how it goes now. Has someone else experienced this?
Installed over LOS16, I added GApps and Magisk. Everything is working fine, so far.
Inviato dal mio Lenovo TB-8703X utilizzando Tapatalk
Same error message for me. Upgraded from 16.
Installed Rom, gapps, magisk.
But then it's working. But performance seems worse compared to 16. I will give the system a little bit to settle down and check performance again.
Thanks for bringing Android Q to the Tab 3 8 Plus! Going to try it out later today
Catscratch said:
Same error message for me. Upgraded from 16.
Installed Rom, gapps, magisk.
But then it's working. But performance seems worse compared to 16. I will give the system a little bit to settle down and check performance again.
Click to expand...
Click to collapse
I had 15, 16 didn't work for me. But I did a factory reset, and then installed. Everything seems fine now, but performance appears to be worse off.
marcurelio said:
Just installed it. Upon boot, a message poped up saying there's an internal error in the device, and that I should contact the maker (Lenovo). The message appeared once more before setup. Let's see how it goes now. Has someone else experienced this?
Click to expand...
Click to collapse
I had the same, but the tablet seems to work great.
BTW. The error message appears on every boot for me. I also did a clean flash with factory reset.
Otherwise I can tell that a clean flash helped for most of the problems. When I upgraded from 16 I had visual glitches and system ui freezing sometimes. These problems are completely gone after doing the clean flash. Only thing that remains is the error message. But this message does not seem to effect the daily work.
Back to lineage 16
Big drain battery in 17
The system always stuck when using recorder
grivam said:
Back to lineage 16
Big drain battery in 17
Click to expand...
Click to collapse
This is true. Guess I'm going back to 15. I couldn't get 16 to keep wifi on when listening to music.
No deep sleep in lineage 17.....
Can someone make for x70l ?
@highwaystar
I tried to compile your sources but get errors is it possible there is missing something?
@highwaystar_ru
Hi,Can you help me ,i try to build crdroid with your device tree.But it miss dsp label.I try to add this label to file_context,failed with the message
Code:
Abort message: 'Error creating cache dir /data/dalvik-cache/arm64 : No such file or directory'
Thanks
Update here
2020-03-29
Fixed error message on boot on WiFi only tablet
Fixed issues with WiFi and Bluetooth MAC addresses
fixed other minor issues
Updated Lineage code
highwaystar_ru said:
Update here
2020-03-29
Fixed error message on boot on WiFi only tablet
Fixed issues with WiFi and Bluetooth MAC addresses
fixed other minor issues
Updated Lineage code
Click to expand...
Click to collapse
After clean install the rom reboots to recovery after 5 seconds everytime that is power on, sorry for my english, please fix it, thank you
Tablet freezes when using record screen in the chinese interface.
ferchnando said:
After clean install the rom reboots to recovery after 5 seconds everytime that is power on, sorry for my english, please fix it, thank you
Click to expand...
Click to collapse
Please upload files from /sys/fs/pstore from recovery after such reboot. There is seems to be some issue with wifi version, I only have LTE version to test, so any log will be appreceated.
ferchnando said:
After clean install the rom reboots to recovery after 5 seconds everytime that is power on, sorry for my english, please fix it, thank you
Click to expand...
Click to collapse
Uploaded fixed version
2020-03-31
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What works:
Calls/SMS/Mobile data
Wifi
Bluetooth
GPS
Camera
Audio
FM radio
Torchlight
USB and WLAN tethering
Broken
DT2W
You tell me
Source code:
device : https://github.com/lenovo-devs/android_device_lenovo_TB8704
device tb-comon https://github.com/lenovo-devs/android_device_lenovo_tb-common
kernel: https://github.com/lenovo-devs/android_kernel_lenovo_msm8953
vendor: https://github.com/lenovo-devs/proprietary_vendor_lenovo
2020-09-06
Update Lineage code
Fixed FM radio issue
Fixed issues on 8704F (wifi only version), when charger cable unplugged (please report if it really works this time, I dont have wifi only tablet to test)
mailru: lineage-17.1-20200906-UNOFFICIAL-TB8704.zip
gdrive: lineage-17.1-20200906-UNOFFICIAL-TB8704.zip
boot.img for TB-8704V: boot-los17.1-tb8704v-20200531.img (source code)
Previous versions:
2020-06-01
Fixed issue running on 8704F (WiFi version)
mailru: lineage-17.1-20200601-UNOFFICIAL-TB8704.zip
gdrive: lineage-17.1-20200601-UNOFFICIAL-TB8704.zip
boot.img for TB-8704V: boot-los17.1-tb8704v-20200531.img (source code)
2020-03-31
Initial realse
mailru: lineage-17.1-20200531-UNOFFICIAL-TB8704.zip
gdrive: lineage-17.1-20200531-UNOFFICIAL-TB8704.zip
boot.img for TB-8704V: boot-los17.1-tb8704v-20200531.img (source code)
How to install
You have to had TWRP installed from this thread TWRP and ROOT for Tab 4 8/10 (Plus) (TB-8704X/F/V,TB-X704L/F, TB-8504X/F, TB-X304L/F)
In TWRP clean Data if you coming from stock ROM and do Install of this ROM. If you have android 8 stock rom installed you have to format Data with data loss, because used encryption is incompatible with android 7.1
TB-8704V (Verizon)
If you have TB-8704V tablet, you have to additionaly flash boot.img from link above after rom intsallation. This tablet has some hardware differences from x and f and requires custom kernel to work,
Thanks
Big thank to @mistersixt, who donated $$ for device.
XDA:DevDB Information
[ROM][UNOFFICIAL][10.0][tb8704f/x/v] LineageOS 17.1 for Lenovo TAB 4 8 plus, ROM for the Lenovo Thinkpad Tablet
Contributors
highwaystar_ru
Source Code: https://github.com/lenovo-devs/android_kernel_lenovo_msm8953
ROM OS Version: Android 10
ROM Kernel: Linux 3.10.x
Based On: LineageOs
Version Information
Status: Testing
Created 2020-05-31
Last Updated 2020-05-31
Groovy
Nice! I’ll give this a test tomorrow ??
deleted
Gapps
Are gapps included in rom
There is no gapps in the rom, you have to download it from opengapps.org if needed.
There are reports about bootloop on wifi version of tablet (LTE version works fine), I will upload fixed version tomorrow.
I'm syncing up the sources on my ROM Kitchen now
What are the install steps if I have lineage 16 already installed. i.e. sufficient to use the existing TWRP. Can I have Dirty flash? etc
highwaystar_ru said:
There are reports about bootloop on wifi version of tablet (LTE version works fine), I will upload fixed version tomorrow.
Click to expand...
Click to collapse
Okay, I’m on a WiFi only tb8704f, so I’ll wait for the updated ROM.
+1. Same here. Waiting for updated ROM for f.
hunnia41 said:
What are the install steps if I have lineage 16 already installed. i.e. sufficient to use the existing TWRP. Can I have Dirty flash? etc
Click to expand...
Click to collapse
Full wipe and reinstall for a major version number release like this, I believe. Dirty flash will almost certainly fail. Your existing TWRP should suffice, but you'll need to reflash gapps when you install los17.1
I've uploaded new version, this should resolve issue with 8704f, please try and report if it works or not. Full adb logcat output on boot are welcome too.
2020-06-01
Fixed issue running on 8704F (WiFi version)
I has no removing telephony apps after installation on WiFi only tablet.
Branch: lineage-17.1
Hi @highwaystar_ru - if I want to run some tests using your sources which branch should I be syncing to? lineage-17.1 for all of them right?
So far, working very well. No crashes or hangs, everything fast and smooth. Two things that don't work are DT2W but this was already known. The other is USB hubs do not work at all. They do not work on LOS 16 either but they do work on LOS14. A fix for this would be greatly appreciated.
Great work other than that as usual highwaystar.
lancebuks said:
Hi @highwaystar_ru - if I want to run some tests using your sources which branch should I be syncing to? lineage-17.1 for all of them right?
Click to expand...
Click to collapse
Yes all lineage-17.1 branches. In latest built these lines are removed to make it bootable on wifi version https://github.com/lenovo-devs/andr.../lineage-17.0/prebuilt/bin/deunify.sh#L16-L30
highwaystar_ru said:
Source code:
device : https://github.com/lenovo-devs/android_device_lenovo_TB8704
Click to expand...
Click to collapse
BTW the device source link is pointing to TB-8703
highwaystar_ru said:
Yes all lineage-17.1 branches. In latest built these lines are removed to make it bootable on wifi version https://github.com/lenovo-devs/andr.../lineage-17.0/prebuilt/bin/deunify.sh#L16-L30
Click to expand...
Click to collapse
I just did a clean install of the latest version (lineage-17.1-20200601-UNOFFICIAL-TB8704.zip) and noted that, although I'm on tb8704f, I can still see the "Messaging" app, which wasn't there when I wasn on 16. Looking at the code highlighted in the github link above I wouldn't expect to see Messaging on my device. I was also asked if I wanted to configure a SIM during the first boot and setup.
I rebooted to TWRP, wiped Dalvik, system, data and cache, pushed lineageos and opengapp (full) zips, then installed and rebooted.
WiteWulf said:
I just did a clean install of the latest version (lineage-17.1-20200601-UNOFFICIAL-TB8704.zip) and noted that, although I'm on tb8704f, I can still see the "Messaging" app, which wasn't there when I wasn on 16. Looking at the code highlighted in the github link above I wouldn't expect to see Messaging on my device. I was also asked if I wanted to configure a SIM during the first boot and setup.
I rebooted to TWRP, wiped Dalvik, system, data and cache, pushed lineageos and opengapp (full) zips, then installed and rebooted.
Click to expand...
Click to collapse
In fixed 20200601 fix is to *not* remove telephony and messaging apps.
highwaystar_ru said:
In fixed 20200601 fix is to *not* remove telephony and messaging apps.
Click to expand...
Click to collapse
Doh! Sorry ?
New installation
Everything works ok for me except Netflix, not compatible with this device not sure why.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (pie), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What works:
Calls/SMS/Mobile data
Wifi
Bluetooth
GPS
Camera
Audio
FM radio
WLAN and USB tethering
Broken
You tell me
Source code:
device : https://github.com/lenovo-devs/android_device_lenovo_TBX304, https://github.com/lenovo-devs/android_device_lenovo_tb-common/tree/lineage-16.0-msm8937
kernel: https://github.com/lenovo-devs/android_kernel_lenovo_msm8953/tree/lineage-16.0-tbx304
vendor: https://github.com/lenovo-devs/proprietary_vendor_lenovo/tree/lineage-16.0-msm8937
2020-12-12
Added double tap to wakeup option
Added hall sensor
Fixed error in sepolicy
mailru: lineage-16.0-20201212-UNOFFICIAL-TBX304.zip
gdrive: lineage-16.0-20201212-UNOFFICIAL-TBX304.zip
Previous versions:
2020-12-07
first release
mailru: lineage-16.0-20201207-UNOFFICIAL-TBX304.zip
gdrive: lineage-16.0-20201207-UNOFFICIAL-TBX304.zip
How to install
You have to had TWRP installed from this thread TWRP and ROOT for Tab 4 8/10 (Plus) (TB-8704X/F/V,TB-X704L/F, TB-8504X/F, TB-X304L/F or one from link below
In TWRP clean Data if you coming from stock ROM and do Install of this ROM. If you have android 8 stock rom installed you have to format Data with data loss, because used encryption is incompatible with android 7.1
TWRP
Built from omnirom android 9.0 source (twrp 3.3.1), includes same kernel as Lineage build, with support for pstore (kernel logs after crash), exfat, ntfs, reboot to EDL mode.
mailru: tbx304-twrp-3.4.0-20201207.img
gdrive: tbx304-twrp-3.4.0-20201207.img
XDA:DevDB Information
[ROM][UNOFFICIAL][9.0][tbx304f/l/x] LineageOS 16.0 for Lenovo TAB4 8, ROM for the Lenovo Thinkpad Tablet
Contributors
highwaystar_ru
Source Code: https://github.com/lenovo-devs/android_kernel_lenovo_msm8953/tree/lineage-16.0-tbx304
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
Based On: LineageOs
Version Information
Status: Testing
Created 2020-03-04
Last Updated 2020-03-19
Thank you I will test it. Still use your build on MiPad 1!
Wow... Great to see this...
So source released by lenovo finally ?
@highwaystar_ru my tablet is on stock 8.1 and the "OEM unlock" switch is greyed out. Is there any way I can unlock bootloader?
Hb20032003 said:
@highwaystar_ru my tablet is on stock 8.1 and the "OEM unlock" switch is greyed out. Is there any way I can unlock bootloader?
Click to expand...
Click to collapse
I hav the same issue. Just dusted out the tablet after a long time.
I tried solutions posted on other threads, but doesn't seem to work.
Will let u know if something works out...
I tried to unlock with https://github.com/bkerler/edl but I get this error:
Code:
[[email protected] edl]$ ./edl.py
Qualcomm Sahara / Firehose Client (c) B.Kerler 2018-2020.
Library.utils - Trying with no loader given ...
Library.utils - Waiting for the device
Library.utils - Device detected :)
Library.utils - Mode detected: sahara
Device is in EDL mode .. continuing.
Library.sahara -
------------------------
HWID: 0x000560e100000000 (MSM_ID:0x000560e1,OEM_ID:0x0000,MODEL_ID:0x0000)
PK_HASH: 0x92242cf8f6fad111a0b0e2aef2fceb6932ac73d2451037cdc6059da3a4f6dd9d
Serial: 0x8546e961
SBL Version: 0x00000000
Library.sahara - Couldn't find a loader for given hwid and pkhash (000560e100000000_92242cf8f6fad111_FHPRG.bin) :(
Hb20032003 said:
I tried to unlock with https://github.com/bkerler/edl but I get this error:
Click to expand...
Click to collapse
So, finally i was able to unlock the bootloader using the firehose file from the stock rom and editing the devinfo.img..
I will make a detailed guide soon, so that others can make use of it.
EDIT: Detailed thread HERE
Thanks....
Updated:
2020-12-12
Added double tap to wakeup option
Added hall sensor
Fixed error in sepolicy
highwaystar_ru said:
Updated:
2020-12-12
Added double tap to wakeup option
Added hall sensor
Fixed error in sepolicy
Click to expand...
Click to collapse
Thanks a lot for the ROM and update..
Works like charm...
LineageOS 16.0 works well.
Which Gapps package works properly?
Just a bit curious anyone here running this rom on lenovo tab 4 10 ?
Please send some screen shots
Eagle-no1 said:
LineageOS 16.0 works well.
Which Gapps package works properly?
Click to expand...
Click to collapse
FlameGapps
Akash23q2 said:
Just a bit curious anyone here running this rom on lenovo tab 4 10 ?
Please send some screen shots
Click to expand...
Click to collapse
@Hb20032003 Thanks
My Screenshot
Is it possible to make a USB OTG work with a USB Flash stick?
QUOTE="Hb20032003, post: 84142017, member: 7023271"]
FlameGapps
[/QUOTE]
Eagle-no1 said:
My Screenshot
Click to expand...
Click to collapse
Thx alot for the screenshots buddies, I wanted to try this thing out but once when I reflashed my tab with stock rom after a softbrick it's oem unlocking got greyed out and now I don't know how to fix that thing ☹
Akash23q2 said:
Thx alot for the screenshots buddies, I wanted to try this thing out but once when I reflashed my tab with stock rom after a softbrick it's oem unlocking got greyed out and now I don't know how to fix that thing ☹
Click to expand...
Click to collapse
Guide for fixing that is here
there is issue with touch in the 12-12-2020 file the touch is mal aligned in my tab by two inches. im not complaining, it says you tell me whats broken so writing here. and Thanks a Lot for the ROM man
Edit: I tried the other release and I have the same problem, any help would be appreciated!
rustyrust said:
there is issue with touch in the 12-12-2020 file the touch is mal aligned in my tab by two inches. im not complaining, it says you tell me whats broken so writing here. and Thanks a Lot for the ROM man
Edit: I tried the other release and I have the same problem, any help would be appreciated!
Click to expand...
Click to collapse
It is working fine on X304L. Check your model version or it may be a hardware issue.
the model is x304l and it is also not a hardware issue as the stock rom and twrp recovery work fine. (the recovery and the rom provided here are the only ones where im facing this issue). im currently typing this from my stock rom on my tablet.