Database Develop

P9 Bricked - Boot loop please help

Hi all,
I am facing severe problems with my P9.
Initial Situation:
Started with a brand new P9 with T-Mobile cust Firmware C150
What I did:
I unlocked bootloader successfully and rooted the phone. Then changed OEM info from C150 to C432. So far so good.
After that P9 booted into factory restore and restored itself into C900 Firmware. Bootloader was locked after that.
I unlocked bootloader successfully for a 2nd time.
Current Situation:
Now when I boot the phone it says: "Your device has been unlocked and can't be trusted" .... Your device is booting now... => But it never boots into OS. It stucks here forever.
When I press vol up and down and power for some seconds I can at least access TWRP. When I try to reboot in TRWP it says "No OS Installed".
But how can I do a stock recovery or install a working Android OS in order to get the P9 into normal boot Modus again?
Please help me.
Solution summary:
Issue solved by using the dload method to change to C432B182:
http://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818/page1
Thx a lot

Hope this helps
https://www.youtube.com/watch?v=JZVsIKtdgV4

morro23 said:
Hi all,
I am facing severe problems with my P9.
Initial Situation:
Started with a brand new P9 with T-Mobile cust Firmware C150
What I did:
I unlocked bootloader successfully and rooted the phone. Then changed OEM info from C150 to C432. So far so good.
After that P9 booted into factory restore and restored itself into C900 Firmware. Bootloader was locked after that.
I unlocked bootloader successfully for a 2nd time.
Current Situation:
Now when I boot the phone it says: "Your device has been unlocked and can't be trusted" .... Your device is booting now... => But it never boots into OS. It stucks here forever.
When I press vol up and down and power for some seconds I can at least access TWRP. When I try to reboot in TRWP it says "No OS Installed".
But how can I do a stock recovery or install a working Android OS in order to get the P9 into normal boot Modus again?
Please help me.
Thx a lot
Click to expand...
Click to collapse
If u have a sd card u can put it in another phone if u have and create a dlod folder, put the Firmware u need in it and then switch it to your P9 and try to upgrade. Since your phone is C900 i think something went wrong in the debranding so use a full stock C150 firmware or try with this B136 Firmware with dt and hw folder toghether with update.app in dload folder.
http://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818/page1
Sent from my VIE-L29 using XDA Labs

@panosm763: Thx for the Video link. I worked according to the same but after changing OEM info phone booted with red warning Screen and installed a fresh C900 Firmware Version. Then after opening bootloader again, SRK Tool cannot connect to the phone anymore maybe due to the fact that usb Debugging mode is not turned on (and cannot be turned on because OS is not reachable)
@Mostar088: I tried the dload method yesterday with the Firmware from the link you shared. Unfortunately without success. The phone did not recognize the Firmware and did not load the same. Maybe because bootloader is still open? I have no clue why this method is not working

Issue was solved.
It worked out fine using the dload method described in here:
http://forum.xda-developers.com/p9/development/stock-rom-dload-file-p9-eva-l09-b136-t3382818/page1
I am now on C432B182 :good:

morro23 said:
Issue was solved.
It worked out fine using the dload method described in here:
https://forum.xda-developers.com/p9/...-b136-t3382818
I am now on C432B182 :good:
Click to expand...
Click to collapse
Link doesnt work for me :? please again ?

MyTiplay said:
Link doesnt work for me :? please again ?
Click to expand...
Click to collapse
Fixed :good:

Sorry for being late, i had no spare time the past days. Glad you fixed your problem

Huawei Updater and HiSuite

Will i void my warranty if i updated my OS using the huawei updater alongside with HiSuite?
I will use this procedure to update my OS.
Update to Nougat B361 usingHuaweiUpdater
Only works on B190
-Only works CUST 636
-Only works EVA-L19DUALSIM
-Only works Unrooted devices and locked bootloader
C636B361
Custom ROM Version:EVA-L19C636B361
Custom ROM URL:http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1256/g104/v73940/f1/
1. InstallHuawei HiSuite(http://download-c.huawei.com/downlo...eCode=worldwide063&version=355249&siteCode=cn)
2. DownloadHuawei Updater 2.0(https://forum.xda-developers.com/devdb/project/dl/?id=21886)
3. ConnectphonetoPC, open HiSuite y established connection Hisuite <-->Phone(minimize HiSuite window)--> Not connect?, touch "Settings -Advanced Settings -> Security" and enable "Allow HiSuite HDB"
4. RunHuaweiUpdater,chek the box"Custom ROM" and "Custom Port"
5. In box "Custom ROM Version”,enter correct ROM version for flashing (EVA-L19C636B361)
6. In box "Custom ROM URL" enter correct ROM URL version for flashing (example:http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1256/g104/v73940/f1/)
7. Click on "Start" button and accept waiting alert messages
8. Maximize HiSuitewindows, touch on "Settings" --> "General" --> Custom Proxy and configure using:
Address:127.0.0.1
Port:41279
9. Back to main HiSuitewindowsand click on "System update"
10. Press "Update" and wait download firmware. Thissmartphonereboot and start upgrade!

Hi, Where did you get this procedure? Would like to read the original thread. Thanks.
Sent from my HUAWEI VIE-L29 using XDA Labs

No, your warranty will remain. You only lose it, when you unlock your bootloader.

I have a P9 EVA-L19 and I followed this process but the phone keeps on failing to verify the updater package. My current build is EVA-L19C636B190.
Am I missing something?

Shadowprince94 said:
No, your warranty will remain. You only lose it, when you unlock your bootloader.
Click to expand...
Click to collapse
ok thank you.

Winterheim said:
I have a P9 EVA-L19 and I followed this process but the phone keeps on failing to verify the updater package. My current build is EVA-L19C636B190.
Am I missing something?
Click to expand...
Click to collapse
i follow the procedure and it works very well. im now using the EMUI 5.
Maybe your HiSuite is not updated?

Jay Navea said:
Hi, Where did you get this procedure? Would like to read the original thread. Thanks.
Sent from my HUAWEI VIE-L29 using XDA Labs
Click to expand...
Click to collapse
https://forum.xda-developers.com/p9/help/p9-7-0-nougat-update-eva-lo9-b182-t3539754

it says no internet connection please check your setting when i select system update on hisuite. How to fix this problem?

Mikilo said:
it says no internet connection please check your setting when i select system update on hisuite. How to fix this problem?
Click to expand...
Click to collapse
Try disabling windows firewall, and starting updater as administrator.

Mikilo said:
it says no internet connection please check your setting when i select system update on hisuite. How to fix this problem?
Click to expand...
Click to collapse
remove everything after f1 in the url,so if u have L19C636 use
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1256/g104/v73940/f1/
instead of :
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1256/g104/v73940/f1/full/update.zip

spring80 said:
remove everything after f1 in the url,so if u have L19C636 use
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1256/g104/v73940/f1/
instead of :
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1256/g104/v73940/f1/full/update.zip
Click to expand...
Click to collapse
still no internet connection after changing the proxy setting of hisuite

Mikilo said:
still no internet connection after changing the proxy setting of hisuite
Click to expand...
Click to collapse
send screenshots for the settings u put in huawei updater and in hisuite

Mikilo said:
still no internet connection after changing the proxy setting of hisuite
Click to expand...
Click to collapse
U can use Firmware Finder to upgrade, just enable Installation via system update in Settings and change Proxy.
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146/page1
Sent from my VIE-L29 using XDA Labs

tried with no luck on huawei updater.
Firmware finder somehow managed to show an update but download are stuck at 0% and it will show no internet connection afterwards.
update **
after removing everything after f1/ at URL, huawei updater managed to download and install.. but failed at verifying the update. now i'm trying with android version of firmware finder

Failed at verifying the update.
lipanz said:
tried with no luck on huawei updater.
Firmware finder somehow managed to show an update but download are stuck at 0% and it will show no internet connection afterwards.
update **
after removing everything after f1/ at URL, huawei updater managed to download and install.. but failed at verifying the update. now i'm trying with android version of firmware finder
Click to expand...
Click to collapse
Same problem here. I am using a P9 EVA-L19C636B190, firmware finder didn't work for me neither. And no OTA or Hicare updates, so no clue when are we going to have Nougat. :crying:

Update to B361
lipanz said:
tried with no luck on huawei updater.
Firmware finder somehow managed to show an update but download are stuck at 0% and it will show no internet connection afterwards.
update **
after removing everything after f1/ at URL, huawei updater managed to download and install.. but failed at verifying the update. now i'm trying with android version of firmware finder
Click to expand...
Click to collapse
I finally managed to update my P9 EVA-L19C636B190 to Nougat. On the Huawei Updater I used this link http:*//*update.hicloud.com:8180/TDS/data/files/p3/s15/G1256/g104/v73917/f1/ (take the * in between out of the link). After the download the verification was fine and now I am running EMUI 5.0 without any issue.
Source: http:*//*club.huawei.com/thread-11960705-1-1.html (same as before, take the * in between out of the link)
I hope I can help you.
Best regards.

Please help. I managed to install the update only upto 60% then it failed. Now my phone is stuck in a bootloop. I already tried to restart my phone by holding the power key for a while. Then I turn it back on by pressing the vol up key and power in my hopes of restoring the phone to its factory setting using the built in recovery of the phone but it failed. While on Huawei eRecovery, it can still connect to wifi but after a few seconds of trying to connect to server, it says "Getting package info failed."
I also tried to use the system recovery of Huawei HiSuite(v5) but it says that my phone is not supported for system recovery. By the way, my phone is Huawei P9 EVA-L19C636B190. The firmware that i tried to flash was EVA-L19C636B361.
Is there anything else that I can do?

jeansquared said:
Please help. I managed to install the update only upto 60% then it failed. Now my phone is stuck in a bootloop. I already tried to restart my phone by holding the power key for a while. Then I turn it back on by pressing the vol up key and power in my hopes of restoring the phone to its factory setting using the built in recovery of the phone but it failed. While on Huawei eRecovery, it can still connect to wifi but after a few seconds of trying to connect to server, it says "Getting package info failed."
I also tried to use the system recovery of Huawei HiSuite(v5) but it says that my phone is not supported for system recovery. By the way, my phone is Huawei P9 EVA-L19C636B190. The firmware that i tried to flash was EVA-L19C636B361.
Is there anything else that I can do?
Click to expand...
Click to collapse
Use Dc Phoenix to unbrick it.
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
Sent from my VIE-L29 using XDA Labs

Finally! I was able to fix my Huawei P9 by flashing EVA-L19C636B168. I extracted the update.zip file and copied the UPDATE.APP in mini SD card inside dload folder using my computer. My phone got error at 99% during update so I got worried for a bit. I restarted the phone and it seemed like everything is working fine (I hope so). I've been using this phone for several hours now and I haven't encountered any issues so far.
To those who are still having the same issue, this might work for you. Don't give up because there is still hope.

HiSuite doesn't work anymore with this proxy settings. Keep saying no internet connection available even you turn off any firewall.

VIE-L09 Can't get out of eRecovery

Hi guys I have a problem. I tried to upgrade my p9 plus manually with an ota update.
I had VIE-L09ITAC555B130 and I tried to install VIE-L09ITAC555B360 to get emui 5.0. The updater wasn't able to complete the download so I tried manually. B360 is split in two files (I don't know why, this is my first Huawei), I tried the first but at 30/40% I got an error, then I tried the second update.app and now my phone boot in eRecovery mode.
I can also boot in fastboot mode but my bootloader is locked and I can't get the product ID.
I also tried to install B130 again but it didn't complete the process. I don't know what to do anymore, some suggestion?
Sorry if my english is pretty bad...

[Help] My Huawei P8 Lite 2017 is bricked (again)

Hello, I've been using my P8 Lite 2017 at Android 7.0.0 firmware since it last got bricked and then I tried update it through TWRP and got no success. I downloaded the dload update for Android 8 for my device and put the files in the sd card. Then I went to dload and it installed succesfully from there. Then the phone rebooted and then this Error Mode screen popped up. I got the same screen earlier when trying to install Android 8 from TWRP but got out there. I was able to get to fastboot but not TWRP or dload. Then I unlocked my bootloader from fastboot in hope that I would get in TWRP or dload but no. Now the phone is just doing reboot loop with the Error mode screen and I can't seem to find any way to get out of it. No dload no fastboot not anything. If there is not any fix for that couldn't I solve the problem by changing the motherboard or changing an specific part in the motherboard? But yeah, that is my problem right now.
Any help will be appreciated

Question eRecovery is not available. Is it possible to flash it?

Hello guys!
My Honor has finally arrived.
First of all, I got into eRecovery to immediately download the new firmware and install it cleanly, but what surprised me was that the eRecovery item is not active about.Oh, how is that?
It's in the recovery menu, but it's just inactive - you can't click on it, it's not highlighted, etc.
Has anyone encountered this? Huawei devices have never had this.
I also tried to restore the phone via Honor Suite - but it is not supported there (
is it possible to download the official firmware somewhere and update the phone completely?

XlaveCnderX said:
Hello guys!
My Honor has finally arrived.
First of all, I got into eRecovery to immediately download the new firmware and install it cleanly, but what surprised me was that the eRecovery item is not active about.Oh, how is that?
It's in the recovery menu, but it's just inactive - you can't click on it, it's not highlighted, etc.
Has anyone encountered this? Huawei devices have never had this.
I also tried to restore the phone via Honor Suite - but it is not supported there (
is it possible to download the official firmware somewhere and update the phone completely?
Click to expand...
Click to collapse
Nope e recovery not supported.
U can install packages via method as highlighted in other thread. But honor suite is just trash.