Related
Just for info, there's two in the box. it covers ONLY the screen that has the LCD. DOesn't cover whole face.
Never had issues sticking on these static type protectors but this one gave me hell. ruined both. the protector is slightly tacky. And will attact dust(like any like this) so make sure you're in a clean room. But both of my protectors wouldn't stick on the edges of the protector. and every time I tried to peel it up and putting it back down, it still didn't hold. Then dust got under it. augh. Ruined both. I wonder if they would take them back since both wouldn't stick on teh edges? Aww... they will probably say I'm returning it because I got dust under it.
i know how you feel! i bought them when i got my hd2 and i got the top two-thirds of the protector on perfect but then the bottom third somehow got dust underneath, it really not that bad when the screen is on but its still annoying. cant wait to get my invisibleshield on it tho!
order this, the maximum protection from zagg....
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
I used invisishield on my ipod. Great stuff, but hard to get on perfect. 3 parts for a curved back and front only covers the LCD part? The front part sounds so unlike them. They normally have it going round buttons and everything.
But it's like putting tint on. You need to have a liquid to make slide just right.
i used invisible shield on my iphone, and it was fully protected. It did add grip to the device which i liked. Anyways, the maximum protection shield covered more than the normal full-body shield. It'll cover not only the LCD screen but all spaces around the hardware buttons and well as the speaker.
starstreak said:
Just for info, there's two in the box. it covers ONLY the screen that has the LCD. DOesn't cover whole face.
Never had issues sticking on these static type protectors but this one gave me hell. ruined both. the protector is slightly tacky. And will attact dust(like any like this) so make sure you're in a clean room. But both of my protectors wouldn't stick on the edges of the protector. and every time I tried to peel it up and putting it back down, it still didn't hold. Then dust got under it. augh. Ruined both. I wonder if they would take them back since both wouldn't stick on teh edges? Aww... they will probably say I'm returning it because I got dust under it.
Click to expand...
Click to collapse
I also got these same screen protectors and was dissapointed when it did not cover the entire screen.
Trick to putting on screen protectors.
1.) Make sure the screen is completely clean of all smudges etc.
2.) Use a can of air duster to remove any small dust particles that might be stuck on the phone. If you don't have that then just take a piece of tape and remove any dust particles or dirt from the screen. This is the most important part!
3.) Line up the screen protector on the screen where you want to place it.
4.) Peel back the backing of the screen protector as you lay the screen on the device. Start from the top of the device and work your way down. If need be take out a credit card or another hard piece of plastic of some sort to push out any air bubbles that may occur as you lay down the screen protector.'
5.) Enjoy a job well done.
It's interesting to note that all the previous posts are (I assume) from US members.
You get a screen protector with the phone and we here in the UK don't.
I have heard mention that when some EU units have been returned for screen problems they have been repaired with what has appeared to be a plastic version of the screen.
My phone is now coming on three months old, never had a protector, never used a case and the screen is immaculate.
Can anyone say if theirs "feels" like plastic?
pa49 said:
It's interesting to note that all the previous posts are (I assume) from US members.
You get a screen protector with the phone and we here in the UK don't.
I have heard mention that when some EU units have been returned for screen problems they have been repaired with what has appeared to be a plastic version of the screen.
My phone is now coming on three months old, never had a protector, never used a case and the screen is immaculate.
Can anyone say if theirs "feels" like plastic?
Click to expand...
Click to collapse
My TMOUS HDC HD2 is definitely glass.
I didn't bother to use a screen protector (didn't even know there was one supplied)...it isn't necessary on a glass screen.
Its very hard to scratch glass...you would need a very sharp object, made out of a very hard material (harder than glass), applied with a lot of pressure. I've had my iPhone for 3 years, and the glass is flawless on it. The aluminum housing is scratched, dented, and dinged up, and the LCD panel has a little bit of bruising on the top left corner BEHIND the glass...but the glass itself is immaculate.
Apple actually pulled the screen protectors off the shelves from the Apple store because they felt they were unnecessary..and frankly anyone who pays for one on the HD2 or iPhone wasted their money.
You'll actually see more imperfections on the screen by applying a screen protector...they have a tendency to attract dust, bubble up, and flat out get dirty. The only maintenance you need to do on a glass screen is polish out smudges and finger prints.
The biggest peril to glass touch screens is cracks from falls....and if your HD2 suffers a big enough impact, a screen protector or 'invisible shield' won't do squat to keep it from cracking
glass or plastic..either way.. i was soooooooooooo confident i wouldnt scratch mine, until about a minute ago when i was in the process of wiping the glass(plastic) screen before putting on a screen protector, i noticed a little scratch...great. Should've put on a protector sooner...
From now on, I willl be putting on a screen protector unless the screen are made out of crystal sapphire or something..
pa49 said:
It's interesting to note that all the previous posts are (I assume) from US members.
You get a screen protector with the phone and we here in the UK don't.
I have heard mention that when some EU units have been returned for screen problems they have been repaired with what has appeared to be a plastic version of the screen.
My phone is now coming on three months old, never had a protector, never used a case and the screen is immaculate.
Can anyone say if theirs "feels" like plastic?
Click to expand...
Click to collapse
We actually do not get an included screen protector. Only the black gel case, which imo is quite crappy... loose and flimsy
http://forum.xda-developers.com/showthread.php?p=6117793#post6117793 Check out oy instillation of the Invisible shield if you are considering buying one. I bought the Maximum Protection and it covers almost everything besides for around the buttons on the bottom, volume rocker, camera, Micro USB/ 3.5 Headphone jack, and the finger nail grove on battery cover. I also would like to note that my TMOUS HD2 did not include any screen protectors in the box.
Sorry imo I have to disagree with you about the included gel being loose mine fits quite snugly and until my zagg comes in I prefer to keep it in the gel...not as slick & keeps the screen(when face down) off the flat surface.
A tipp for all you guys getting dust under the screen:
I always apply a new screen protector in my bathroom after showering - the steam in the air (the more steam, the better) binds most of the dust particles and makes it A LOT easier to get a perfect result!
MAMeingast said:
A tipp for all you guys getting dust under the screen:
I always apply a new screen protector in my bathroom after showering - the steam in the air (the more steam, the better) binds most of the dust particles and makes it A LOT easier to get a perfect result!
Click to expand...
Click to collapse
I agree, I used to do this back in the day before Zagg came around. It works great.
I have read with other products people use a drop or water/soap water before applying a screen protector. Has anyone used this method on this device? i am concerned that the water will somehow ruin the device. I know it's only a drop or 2 but wanted to get some feedback first before i tried it.
Hi everyone,
I'm planning on purchasing the Nexus 5X in a few days, just need to find the right accessories for it (cables, cases, screen protectors).
I was wondering if anyone can recommend a screen protector that has a cutout for the proximity sensor.
Also, I seriously only found out today there is such a thing as tempered glass. After researching a bit, I learned of it's pros (actually protects your screen if the phone falls) and it's cons (can crack easily for no reason ,poses somewhat of a health risk if breaks).
Pros: http://temperedglassscreenprotector.org/
Cons: http://www.clear-coat.com/blog/why-we-dont-sell-tempered-glass-screen-protectors/
Strangely, all the screen protectors I find on Amazon are tempered glass.
So, which one should I buy (tempered or plastic), and can you recommend a specific screen protector?
I wouldn't say they crack easily, but that'll depend on a bunch of variables. All I can say is it looks good and feels much nicer than the PET/non tempered glass screen protectors. Spigen is a good brand to go with.
Read the thread below:
http://forum.xda-developers.com/showthread.php?t=3214188
I recommend the skinomi screen protector, it's not glass. It's the kind that feels like rubber and applied via water. I love these.
How you apply it with water? They can get to te mic's, no? You have safe way to do that?
Hi, Im very pleased with Nexus 5X Screen Protector, Spigen® [Crystal] Full HD, I used to have it on my Nexus 5 and I was so satisfied that I bought it again for my N5x. Feels like glass, perfecly cutted you have 3x screen protector included, dust removal and positionning tool to hlelp perfect use. At least two times saved my screen on my old nexus 5. And almost nobody noticed that Im using a screen protector....
I've played around with a few screen protectors over the years, including some tempered glass ones. I can show you some reviews I've written, if you're interested.
Most of the cheap glass options are /not/ multicoated. What that means is, while they might be very difficult to scratch, they will cause some reflections, way more than the bare screen. Also, one of the coatings applied in modern multicoating is an oleophobic coating. That means a layer which helps the glass reject oils, including the skin oils on your fingertips. So applying a glass screen protector usually means you'll have to clean your screen way more often, and also that it will be considerably more difficult to actually clean the screen.
If you're dead-set on a screen protector, I highly recommend you find yourself a multicoated option. These will be no less than $20 even on sale. They can be $30+ normally.
Personally, I trust Corning Gorilla Glass 3 as sufficient in this generation. You might get a scratch or two over a few year span, but, virtually everything your phone will meet won't be hard enough to damage the glass.
Pandages said:
I've played around with a few screen protectors over the years, including some tempered glass ones. I can show you some reviews I've written, if you're interested.
Click to expand...
Click to collapse
I would love to.
Pandages said:
Most of the cheap glass options are /not/ multicoated. What that means is, while they might be very difficult to scratch, they will cause some reflections, way more than the bare screen. Also, one of the coatings applied in modern multicoating is an oleophobic coating. That means a layer which helps the glass reject oils, including the skin oils on your fingertips. So applying a glass screen protector usually means you'll have to clean your screen way more often, and also that it will be considerably more difficult to actually clean the screen.
Click to expand...
Click to collapse
I don't really understand, you're talking about tempered glass screen protectors?
Pandages said:
If you're dead-set on a screen protector, I highly recommend you find yourself a multicoated option. These will be no less than $20 even on sale. They can be $30+ normally.
Click to expand...
Click to collapse
Can you give me some examples? Are the products recommended to me here (like the Spigen) multicoated?
elyashiv1994 said:
How you apply it with water? They can get to te mic's, no? You have safe way to do that?
Click to expand...
Click to collapse
You apply a thin layer them squeeze out the excess. It's incredibly easy to retry if you set it wrong the first time. You can push the water away from the mic and speaker and use a cloth to dab up any excess water.
buru898 said:
You apply a thin layer them squeeze out the excess. It's incredibly easy to retry if you set it wrong the first time. You can push the water away from the mic and speaker and use a cloth to dab up any excess water.
Click to expand...
Click to collapse
There is something that I can put in the mic to seal it? I don't want to take risk(especially when you have holes in top and bottom)
glass screen protector http://dx-box.com/nillkin-amazing-h-pro-anti-explosion-tempered-glass-screen-protector.html
I've been using glass screen protectors since May 2014. I swear by them. They don't crack easily like Clear Coat claims. I've only had to replace them twice. Once because an edge got pulled up months later so there was a air gap on one side. The second time, it actually did crack but that was after falls with a TPU case on. As many others have stated, with tempered glass screen protectors, that will crack before the actual glass of the screen does. And good ones don't shatter into little pieces like Clear Coat says. On the two replacements, I broke them fully and the pieces stay together. Also I really like the glass feel. Not sure how non-glass screen protectors feel though. Back when invisibleSHIELD was popular, that tacky feel wasn't nice.
Sent from my Nexus 5X using Tapatalk
Jill McAuliffe said:
glass screen protector http://dx-box.com/nillkin-amazing-h-pro-anti-explosion-tempered-glass-screen-protector.html
Click to expand...
Click to collapse
Thanks. Does it cover the proximity sensor?
Even though the image shows it is, some companies say that despite the image, their product does not cover the sensor.
EeZeEpEe said:
They don't crack easily like Clear Coat claims. ... And good ones don't shatter into little pieces like Clear Coat says.
Click to expand...
Click to collapse
Yeah it was obvious Clear Coat exaggerated on purpose... Still, I wanted to check with people here what they think.
EeZeEpEe said:
As many others have stated, with tempered glass screen protectors, that will crack before the actual glass of the screen does.
Click to expand...
Click to collapse
You mean, they will break before the screen glass when the phone falls?
A question for everyone... Is there a problem, with tempered glass of course, with seeing the screen outdoors when it's sunny, even in full brightness?
TheeWolf said:
Yeah it was obvious Clear Coat exaggerated on purpose... Still, I wanted to check with people here what they think.
You mean, they will break before the screen glass when the phone falls?
A question for everyone... Is there a problem, with tempered glass of course, with seeing the screen outdoors when it's sunny, even in full brightness?
Click to expand...
Click to collapse
Exactly. I think of it similar to a crumple zone in a car. It will absorb some of the force before the phone's glass does. Now of course, with a great amount of force like dropping it from 10 feet or throwing it, I'm sure both the screen protector and the phone's glass would break. Regular accidental drops should work out the way I described.
As for outdoor visibility, there's no noticeable decrease in brightness or increase in glare. All of the manufactures usually advertise something like 99.9% transparency.
Here's an interesting tempered glass screen protector review. Cued up exactly on the drop test to rocks and removal:
https://youtu.be/UnvC6EERMyI?t=2m21s
Keep in mind that plastic protects better than glass and plastic does not need to be replaced where as most drops will break a glass protector. It is made from a thin easily breakable material after all.
The reason to pay roughly 10x as much for glass is because it feels much nicer on your finger. Plastic can also cause rainbow like reflections and can be a bit harder to apply than one solid piece.
However glass costs a lot more upfront and in the long run to replace. A plastic protector is about $1 and if applied properly won't ever need to be replaced.
bblzd said:
Keep in mind that plastic protects better than glass and plastic does not need to be replaced where as most drops will break a glass protector. It is made from a thin easily breakable material after all.
The reason to pay roughly 10x as much for glass is because it feels much nicer on your finger. Plastic can also cause rainbow like reflections and can be a bit harder to apply than one solid piece.
However glass costs a lot more upfront and in the long run to replace. A plastic protector is about $1 and if applied properly won't ever need to be replaced.
Click to expand...
Click to collapse
Yes plastic ones don't break break or need to be replaced but I don't think they provide the same impact protection in absorbing drops. You'll probably have a screen broken under the intact plastic screen protector.
EeZeEpEe said:
Yes plastic ones don't break break or need to be replaced but I don't think they provide the same impact protection in absorbing drops. You'll probably have a screen broken under the intact plastic screen protector.
Click to expand...
Click to collapse
I have no background on the subject but just thinking about it logically, I don't think glass can be as protective as plastic.
For instance RhinoShield only offers plastic screen protectors. Their test videos show how easily GG would break from certain impacts and how much plastic protects it. Even the best tempered glass can only hope to be as strong as GG.
My basic understanding of the situation is glass protectors work because it breaks and saves the screen underneath, where as plastic works by actually strengthening the glass itself.
However for each time the glass protector breaks and needs to be replaced, the plastic would keep on trucking.
I think the misunderstanding arises when a user drops their phone with a glass protector and it breaks thus "saving" their screen. But what if they had plastic? Would the screen of broken then? What if they had no protector? We can't say for sure what the results would have been. However to the user that is a clear indication of the glass protector working, where as I would say that's only a clear indication of the glass protector breaking easily.
bblzd said:
However to the user that is a clear indication of the glass protector working, where as I would say that's only a clear indication of the glass protector breaking easily.
Click to expand...
Click to collapse
Right. That's how I see it as a user. Also, the clarity, feel, and scratch resistance can't be matched by plastic.
Sent from my Nexus 5X using Tapatalk
I've actually dropped my 5x naked just once so far and got lucky without any cracks, but I do believe if I had a glass SP it would've broken. In the end I think it's luck and a good case that will protect from a bad drop as the screen protector is mainly for scratch protection. I've kept my glass SP as a backup in case the factory oleophobic coating stops working as effectively.
Here.
IQ Shield LiQuidSkin - Huawei Nexus 6P Screen Protector (2015) & Warranty Replacements - HD Ultra Clear Film - Protective Guard - Extremely Smooth / Self-Healing / Bubble-Free Shield
They also have glass. Check em both.
http://www.amazon.com/B016CKR3QA/dp...055&sr=8-2&keywords=nexus+6p+screen+protector
Do any of you guys use the op3t with no sp? Does it last in a pocket full of keys
I've used mine without a screen protector for a few months now without a problem. Whiles keys shouldn't scratch gorilla glass in theory, it will probably mark up the oleophobic coating on the glass. I would not recommend keeping the phone in the same compartment as keys.
Anova's Origin said:
I've used mine without a screen protector for a few months now without a problem. Whiles keys shouldn't scratch gorilla glass in theory, it will probably mark up the oleophobic coating on the glass. I would not recommend keeping the phone in the same compartment as keys.
Click to expand...
Click to collapse
What kind of case are you using?
SysAdmNj said:
What kind of case are you using?
Click to expand...
Click to collapse
A thin polycarbonate case, this one to be specific.
I've been using one of my OP3T without a screen protector for a few months now and all is well! =) I'm using a case similar to the one above. My latest one came with a free gel case, but I already bought another polycarbonate case and I wouldn't want the gel one anyway cause you can see all the data through it.
I use a film protector after using my 3t for a few weeks very scratched (minor) can notice massively on certain angles .
Anova's Origin said:
Whiles keys shouldn't scratch gorilla glass in theory, it will probably mark up the oleophobic coating on the glass.
Click to expand...
Click to collapse
That is a useful and informative point. It explains why folks (myself included) have noted scratches on Gorilla Glass screens, even though it is supposed be highly scratch resistant.
Personally I've gone back and forth on using a screen protector. Used them religiously for years, having owned smartphones since the old days when most smartphones did not even have Gorilla Glass, and scratches were almost inevitable if you didn't use a protector. Then on my last phone (HTC M8) I actually bought a protector, but didn't get around to putting it on (the appearance of young children in my life having led to massive procrastination of such things!). The screen seemed fine with no protector, and I ended up just leaving it that way. Going on 3 years, and that phone is still fine; although there are some very faint scratches.
On the other hand, my work makes me carry an iPhone (in addition to my personal device). I have an iPhone 6 that got a huge gouge on the GG screen about 2 weeks after receiving it. Admittedly, I don't give a crap about this phone, and often toss the phone in my pocket with keys, in my bag, etc.
So I guess the short story, is that you can go for years without a scratch (as many do). But you can also get a scratch at any time. It's that latter situation, where you end up regretting it, and wish you had a protector. In the end, it's really a judgment call.
My 3T came with a plastic protector already installed. Some folks have reported having a tempered glass protector. I'll probably just leave the plastic one on, until it gets scratched up or peels off (it's already starting to peel away at the corner near the home button), then from there decide if I want to go naked, plastic protector, or a tempered glass one.
Doesnt it come with a screen protector put on already?
I am using the stock plastic screen protector that comes installed. It protects the phone from scratches, so I thing it it very important.
I usually use glass screen protectors because they can save your screen from braking and it is harder to scratch but on the OP3\T it doesn't cover all the screen, and that really annoys me.
Never used a protector on any phone ever. The OP holds up better than most :good: I try to be a bit carefully with keys and such, but I don't really care for scratches. It's a tool, not jewelery...
I use a Spigen neohybrid, but only to hold the metal plate for my car holder. If it weren't for that it'd be completely naked. I also have a dbrand skin on it. But for the looks, not for protection... That stone with red accents is sexy :victory:
HeroPlane said:
I am using the stock plastic screen protector that comes installed. It protects the phone from scratches, so I thing it it very important.
I usually use glass screen protectors because they can save your screen from braking and it is harder to scratch but on the OP3\T it doesn't cover all the screen, and that really annoys me.
Click to expand...
Click to collapse
Lol it annoys you? Really??? Mate I've been using the stock one since 2 months ago. I put it on perfect so it don't bother me...yes it's obviously not a full fit. But quality is crap lol. Screen protector has cracks all over it now going to change it out for a plastic film when I get back home
Sent from my ONEPLUS A3000 using Tapatalk
Took off the built in one in November and have been using my OnePlus 3T with a spigen rugged armor. Phone, screen, and case are all in excellent condition.
I was using it without any protector... but i got disappointed... As i saw some scratches... i use my phone carefully...
I was previously using Lumia 1020 from past two years... Still using it without any protector... Still no scratches in two years...
Whereas in 3t the scratches appeared within a month...
I have also i used iphone without any protector, iphone also did not had any scratches until i went to a beach for holidays... there i got some scratches due to sands...
I will suggest you guys to use protection. I was using a tempered glass aftr seeing the scratches but was not happy with the quality as it was making the screen seemed to be a bit inside also the bezel and screen had greater contrast so the full tempered glass comes like that, making the phone look cheaper..also while using the home button it was not a not satisfactory due to the level difference of the tempered glass and the button.. removed that and installed old school screen guard... Im Happy now
So got my shiny new Note 8 week ago. Also with that got the Whitestone Dome screen protector and alcantara case.
Tried to install screen protector:
1st. attempt: The screen lined up incorrectly from the bottom, tried to "lift it up to the position" just created more airbubles and the glue poured out from the sides.
After cleaning my Note 8 with the alcohol swipes, (It was a mess to try to clean the phone AND the glass screen protector)
2. attempt with the second bottle of glue..... There was a dust particle on the glue itself. Great.
Wait for a week to mobilefun to ship me another one. (while doing so i was "dry- practicing" to get it 100% correct this time)
3. attempt was a charm.... until.... when the glue spread there was 2 small air bubbles... Take the second bottle and "tap" the small air bubbles away. (while doing so being extremely nervous about that the screen protector might move or great new bubbles). Managed to get the bigger one out but there was the small one... Didn't get that out.
Light up the UV light and call it a day. Only problem is now there is small air bubble that is pretttty distracting to say the least.
So, now i am with 50€ in my account from the order. (Because i demanded that they refund me this horrible product). I am left to choose new screen protector.
My options that i have read:
- Rearth invisible defender - The problem with this is that there is "snowfall" effect and the screen is too damn sticky (according to reviews)
- IQ Shield - The problem with this is that the S-pen (according to reviews) leaves trails to the TPU protector. Because it's so soft and it will not cure overtime.
-Zagg invisible shield - Unresponsivnes and the fact that it has "raimbow" -effect on the screen.
New one that i just founded out about:
-Powerpeak Base- According to this guy (Install Jimmy is Promo's "Base Screen protector for Samsung GALAXY S8 & Note 8 here) Its pretty good. Might be ad though... Does any of you have experience on this?
The whitstone does have pretty good responsiveness and all that good stuff. But the problem is the installation and even when i tried to be 100% accurate with the installation, it still greated air bubbles. And the fact that there is a HUGE risk that the glue when cured can cause damage to the screen.... More specifically if you manage to cure the glue when the glue is over the earpiece... you are ****ed with your 1000€ phone.
I am doing the poor mans whitestone. LOCA glue and cheap amazon tempered glass. Took me two tries to get it right. So with two screens and glue, out $20. I did buy a UV lamp for dual use. My phone and girlfriends nails. I had the ZAGG on my S8+, didn't like it at all, unresponsive. But i bet if you glued it on with LOCA it would be good.
Bullitt3309 said:
I am doing the poor mans whitestone. LOCA glue and cheap amazon tempered glass. Took me two tries to get it right. So with two screens and glue, out $20. I did buy a UV lamp for dual use. My phone and girlfriends nails. I had the ZAGG on my S8+, didn't like it at all, unresponsive. But i bet if you glued it on with LOCA it would be good.
Click to expand...
Click to collapse
I am sort of guy, who can easily mess things like that up... So not going to risk it.
Galaxy Note 8 Screen Protector [2-Pack][Not Glass], Yootech [Case Friendly] Galaxy Note 8 Wet Applied Screen Protector BUBBLE-FREE for Samsung Galaxy https://www.amazon.com/dp/B0756DBXWP/ref=cm_sw_r_cp_apap_xFOJgXZGMrAdo
This one seems a little less rubbery imho.
Sent from my SM-N950U using Tapatalk
DAvid_B said:
Galaxy Note 8 Screen Protector [2-Pack][Not Glass], Yootech [Case Friendly] Galaxy Note 8 Wet Applied Screen Protector BUBBLE-FREE for Samsung Galaxy https://www.amazon.com/dp/B0756DBXWP/ref=cm_sw_r_cp_apap_xFOJgXZGMrAdo
This one seems a little less rubbery imho.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
I did check that thanks! Only problem is that i live in EU (Finland) And Amazon will not ship that item to me.... Looked up in Ebay and they will add 20€+ to the original price...
Bummer tho,.
Hello, this is Whitestone.
I am so sorry that you had a terrible experience with our product. Air bubbles can be very frustrating on a new screen protector. We are constantly trying to solve the problem of air bubbles, and the seesaw type has drastically reduced it but not fully eliminated it.
I am very thankful for your patience to give our product three tries before you made your decision and also for a detailed feedback on what became wrong.
Since you have given a lot of effort on our product, we will try and help you out if you are willing to give our product another chance.
Feel free to contact us through here, or our homepage, or any social media.
Again I am terribly sorry.
Base TGSP is a piece of shot
That Jimmy guy sounds like an infomercial
Only use skinomi wet i stall protectors.
Use it before on my note edge 4. The spen did leave marks.
But with the note 8. I dont see any marks. So either the protector is better or the tips are softer
xile6 said:
Only use skinomi wet i stall protectors.
Use it before on my note edge 4. The spen did leave marks.
But with the note 8. I dont see any marks. So either the protector is better or the tips are softer
Click to expand...
Click to collapse
do you forsee it lifting up on the edges? did you get the techskin one that comes in a twopack?
I'm currently going through a batch of clear protection film HD skins on my Note 8. Generally are average, but some dont cover the edges that well or some have too much orange peel, or some are not cut correctly. Typical chinese "dog" turd.
So far. Spigen, coverage is excellent, but suffer from a lot of orange peel. Illumi Shield , coverage is rubbish, one side ( left side ) is cut shorter than the other. But less orange peel.
Amovo front and back clear film, the worst ever. The pikeys didnt even inc a lubrication spray with their aggrssive adhesive film. Secondly the film that you remove to apply was stuck like gorilla glue to the actual film. You know, the tab that say "peel here first" and " peel here last".
I dont care less for the glass crap for curved screens, but in search of a half decent clear film currently. The search continues...
Limeybastard said:
I'm currently going through a batch of clear protection film HD skins on my Note 8. Generally are average, but some dont cover the edges that well or some have too much orange peel, or some are not cut correctly. Typical chinese "dog" turd.
So far. Spigen, coverage is excellent, but suffer from a lot of orange peel. Illumi Shield , coverage is rubbish, one side ( left side ) is cut shorter than the other. But less orange peel.
Amovo front and back clear film, the worst ever. The pikeys didnt even inc a lubrication spray with their aggrssive adhesive film. Secondly the film that you remove to apply was stuck like gorilla glue to the actual film. You know, the tab that say "peel here first" and " peel here last".
I dont care less for the glass crap for curved screens, but in search of a half decent clear film currently. The search continues...
Click to expand...
Click to collapse
I'm looking at IQShield and Skinomi right now but don't have enough info to decide on one or the other. Would love to hear about your experiences with other non-TGSPs and if you ever come across one you would recommend.
KBeckett said:
I'm looking at IQShield and Skinomi right now but don't have enough info to decide on one or the other. Would love to hear about your experiences with other non-TGSPs and if you ever come across one you would recommend.
Click to expand...
Click to collapse
Im primarily using and trying non glass type films, similar to the stuff used to protect car paint protection. My background includes being able to apply paint protection film on cars so these are all from the same mold that I have been trying. BTW, heat of a hairdryer will aid in adhering the curved edges once applied- slight tip.
I have not tried IQShield yet, sorry. So far the Spigen one fitted well coverage wise,but their film is very aggressive in the orange peel front,
I might try Skinomi next, but I have heard they cut their films short to save a few bucks.
Lets liase and share our experiences with these type of films, cheers.
Thanks for all of you for the help and responses.
Yes the IQshield and Skinomi are on the top of my list... They are around 20€ including shipping to Finland from Ebay. A bit expensive but lets see....
Im currently using IQshield version 2 (case friendly) for about a week now.
I've done a lot of wet install before so i know what to expect using this type of screen protector. Its been a week now and so far no lifting on the curve part of the screen. it is smooth to touch, sensitivity is normal and very good. Im using a VRSdesign slim case and it works well, all corners fitted very well.
I also used skinomi before and if i remember it right IQshield is more smoother than skinomi in-terms of orange peel feeling. The only problem that is s-pen will leave marks when used with this kind of screen protector. (i tried it at the very bottom and its still have mark after a week)
I can give this IQshield a 7.5/10 score. LOL
YesThisIs said:
The whitstone does have pretty good responsiveness and all that good stuff. But the problem is the installation and even when i tried to be 100% accurate with the installation, it still greated air bubbles. And the fact that there is a HUGE risk that the glue when cured can cause damage to the screen.... More specifically if you manage to cure the glue when the glue is over the earpiece... you are ****ed with your 1000€ phone.
Click to expand...
Click to collapse
I used the tip of placing painter's tape over the speaker. I covered the speaker enough to not interfere with the glass. It worked great! I do have three small bubbles after two tries but can't see them unless I try. My wife's has one bubble in about the same spot as mine. The lower left corner about 1/3 up the screen where the curve starts. There a number of ways to avoid the creation of bubbles. I couldn't say them all because I'm not an expert in LOCA glue and it's properties. Experimentation is the only way to find out.
Whitestone Dome Glass said:
Hello, this is Whitestone.
I am so sorry that you had a terrible experience with our product. Air bubbles can be very frustrating on a new screen protector. We are constantly trying to solve the problem of air bubbles, and the seesaw type has drastically reduced it but not fully eliminated it.
I am very thankful for your patience to give our product three tries before you made your decision and also for a detailed feedback on what became wrong.
Since you have given a lot of effort on our product, we will try and help you out if you are willing to give our product another chance.
Feel free to contact us through here, or our homepage, or any social media.
Again I am terribly sorry.
Click to expand...
Click to collapse
I am glad that you have started beeing more on forums and social media. I want to thank you for sending me a new one. Now i am waiting for it. Hope this time works.
To be honest, it will be difficult to actually get most tempered glass protectors to stay on this curved glass.. Its a pain and it sucks because I would actually like to get one. I just ordered the whitestore myself..., but they wont be in stock again until the 30th...
I got the PowerPeak Base and it is utter garbage. I lost atleast 30% touch sensitivity and then it just eventually slid off of my phone from me trying to swipe so hard. The middle actually dried up and there was nothing holding the middle to the phone.
I despise the wet installs. They are too soft and will leave indents as you said.. So really its either try tempered glass protectors until you find the one you want, go with indents and wet installs, or just go no screen protector like me!
I have the wet install spigen ones but I tbh would rather go with no protector than use them.
I ordered and installed this on my Note 8 : https://smile.amazon.com/gp/product/B074G1W2RC/ref=oh_aui_detailpage_o01_s02?ie=UTF8&psc=1
Along with a Spigen Tough Armor case. It seems to work well and no real screen sensitivity issues either.
twistanesh said:
do you forsee it lifting up on the edges? did you get the techskin one that comes in a twopack?
Click to expand...
Click to collapse
I get the case friendly 2pack. And havent had problems with lifting.
Had my note 8 since sept 8 and been caseless and no lifting.
Anyone planning on using a cheap protector with LOCA glue needs to check the strength of the LOCA. Some have reported they were not able to remove the protector after using some LOCA glue.
I had 3 attempts at the Dome Glass myself. The first one I got had a broken bridge. I could not get the glue in the right spot. Whitestone refunded me. I bought the next set from Amazon. Everything was perfect until I peeled the plastic off the back of the protector. There must have been a fleck of dirt near the side. I did not see it as I did not have enough light.
I sent the second one back to Amazon and just had to pay return shipping. With the third one I took a different approach. I used a totally level counter top in the bathroom. I ran the shower with hot water for about 10 minutes so the whole bathroom was steamed up. This kept the dust down. I cleaned the phone screen and when I removed the plastic from the protector, it somehow grabbed another piece of dirt. Due to the extreme lighting, I saw it and removed it before installing. It installed perfectly with no dust/dirt or air bubbles. I did the first cure with the UV light then took it out of the jig and wiped the sides, top and bottom with an alcohol pad. I then did the final cure. Not one ounce of glue seeped out. I did not protect the speaker or anything else. If this is done perfectly, this is the absolute best protector available IMHO. The problem is anything short of a perfect install will drive many of us with OCD crazy.
On Monday we traded in my Mothers iPhone and she went with a Note 8. The Dome Glass arrived today. This time, perfect install the first time. I wish Whitestone would include 2 pieces of glass per package since this is the most expensive Note 8 protector. Their CS is a bit slow but they did take care of me in the end. It's a bit of a ripoff to sell the kit for 49 but then only sell the glass and one tube of glue for 39. The refill pack should be 15-20 at the highest.
After a week, none of my edges are lifting at all. Some may be using cases that are not compatible. My protector does not touch my case at anyplace. I think cases that touch the protector have a good chance of raising the edges. Even if the case looks fine after install, if grabbing it makes the case touch the glass, it will eventually lift and get bubbles.
I've looked for the past 2 days now and I cannot for the life of me find a decently priced FULL ADHESIVE (tempered glass) screen protector. I ordered a "bubble free" and it looks like garbage, only the edges have adhesive so it's not fully on, it definitely was not tempered glass, and when it's off you can see the rainbow effect.
I'm just confused because the last phone I had was a Note 5 and it wasn't that hard to find a tempered glass screen protector, we didn't have "adhesive edges" back then so all you had to do was spray a bit of water and card out any bubbles. I just upgraded to a Note 8, is this really so hard to find?
I did check out Finally, Tempered glass inexpensive full back adhesive for the Note Post and they do not sell the same product anymore.
Any help is appreciated, thanks.
franlando said:
I've looked for the past 2 days now and I cannot for the life of me find a decently priced FULL ADHESIVE (tempered glass) screen protector. I ordered a "bubble free" and it looks like garbage, only the edges have adhesive so it's not fully on, it definitely was not tempered glass, and when it's off you can see the rainbow effect.
⁷
I'm just confused because the last phone I had was a Note 5 and it wasn't that hard to find a tempered glass screen protector, we didn't have "adhesive edges" back then so all you had to do was spray a bit of water and card out any bubbles. I just upgraded to a Note 8, is this really so hard to find?
I did check out Finally, Tempered glass inexpensive full back adhesive for the Note Post and they do not sell the same product anymore.
Any help is appreciated, thanks.
Click to expand...
Click to collapse
There are some on Amazon(UK), but they're nigh on impossible to put on without creating bubbles.
Personally I prefer the end result from the ones that you don't like. Maybe I've been lucky but these are what I use on my Note 8, my daughter's Note 9 and my wife's S9. Never spent more than £2.50 on one.
What you realise with experience, is that these will crack sooner rather than later they're all the same bar a minor tweak, 3 - 4 months and you'll be replacing them anyway.
Save your money.
i use this and i am very happy..!
it is a uv glue tempered glass like whitestone but a lot cheaper. (i have used whitestone doom in the past and i put them in the same quality)
https://www.ebay.co.uk/itm/For-Sams...d7cc3eb20:m:mORLJDIrICxslUiTcMTsP8A:rk:2:pf:0
Im used whitestone dom. Its really expensive but best. No word..
https://www.ebay.co.uk/itm/WHITESTO...405940&hash=item33f5c2c44c:g:E8QAAOSwSDxbrgwa
If you do a search on Amazon, you will some really good full adhesive tempered glass screen protectors for your Note 8.
iceepyon said:
If you do a search on Amazon, you will some really good full adhesive tempered glass screen protectors for your Note 8.
Click to expand...
Click to collapse
The one I ordered WAS from amazon, but it was complete garbage, imagine taking 15$ and just putting it straight into the trash can. Did you have any specific recommendation or..
I have spent well over $60 on screen protectors.. Given up.
So annoyed with the curved screens. May even change brand
andreasarxon said:
i use this and i am very happy..!
it is a uv glue tempered glass like whitestone but a lot cheaper. (i have used whitestone doom in the past and i put them in the same quality)
https://www.ebay.co.uk/itm/For-Sams...d7cc3eb20:m:mORLJDIrICxslUiTcMTsP8A:rk:2:pf:0
Click to expand...
Click to collapse
Gonna try this, thanks!
franlando said:
I've looked for the past 2 days now and I cannot for the life of me find a decently priced FULL ADHESIVE (tempered glass) screen protector. I ordere3d a "bubble free" and it looks like garbage, only the edges have adhesive so it's not fully on, it definitely was not tempered glass, and when it's off you can see the rainbow effect.
I'm just confused because the last phone I had was a Note 5 and it wasn't that hard to find a tempered glass screen protector, we didn't have "adhesive edges" back then so all you had to do was spray a bit of water and card out any bubbles. I just upgraded to a Note 8, is this really so hard to find?
I did check out Finally, Tempered glass inexpensive full back adhesive for the Note Post and they do not sell the same product anymore.
Any help is appreciated, thanks.
Click to expand...
Click to collapse
Good luck finding anything that will come factory with "full adhesive" I have tried every type in the book short of the over priced white dome. I ended up finding a perfect solution (for me) though a 3D or 4D"d Temp glass protector as its advertised anyways... i think they're all pretty much the same at the point of "D" in the description but that being said they are only like 6 bucks a piece for a full cover option i opted for with out the whole top section cut out around the speakers and camera. They were only edged adhesive but the trick is to use the LOCA glue to adhere it to the phone... I am aware its for LCD screen repairs but if you get the 2500 viscosity its a lot thicker and it never fully cures even under a black light but it has the right amount of stickiness to stay on the phone seamlessly on my note 8 and have no popping or issues with input of the s pen, Its great! the corners dont lift even its on there good. Yes ive cracked and had to replace them before so i can vouch they are remove-able. I will add if they are on there a long time that around the bottom center where you usually touch the screen the most it can be a pain in the ass to get it separated.. Ive found that 91% rubbing alcohol and a fresh clean razor blade window scrapper lifts it off without scratching the screen. Hope this helps
Liftkit said:
Good luck finding anything that will come factory with "full adhesive" I have tried every type in the book short of the over priced white dome. I ended up finding a perfect solution (for me) though a 3D or 4D"d Temp glass protector as its advertised anyways... i think they're all pretty much the same at the point of "D" in the description but that being said they are only like 6 bucks a piece for a full cover option i opted for with out the whole top section cut out around the speakers and camera. They were only edged adhesive but the trick is to use the LOCA glue to adhere it to the phone... I am aware its for LCD screen repairs but if you get the 2500 viscosity its a lot thicker and it never fully cures even under a black light but it has the right amount of stickiness to stay on the phone seamlessly on my note 8 and have no popping or issues with input of the s pen, Its great! the corners dont lift even its on there good. Yes ive cracked and had to replace them before so i can vouch they are remove-able. I will add if they are on there a long time that around the bottom center where you usually touch the screen the most it can be a pain in the ass to get it separated.. Ive found that 91% rubbing alcohol and a fresh clean razor blade window scrapper lifts it off without scratching the screen. Hope this helps
Click to expand...
Click to collapse
Thanks for sharing the info, but do you mind posting a link?
franlando said:
Thanks for sharing the info, but do you mind posting a link?
Click to expand...
Click to collapse
Yeah sorry here they are..........
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/332744157134
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/271328437299
Look for the one which comes with UV light and UV activated adhesive.
There is plain glass with back side laminated sheet which needs to be peeled off. A UV activated glue that is liquid and needs to go on the screen over which the glass is placed.
Then its all like spreading butter between toasts. You must apply little pressure so it spreads over entire screen then use the UV light to harden it.
Its the best i have found yet after nearly 10 screen protector. It need expertise and is not for the faint of heart. Good luck
sandeepkumar0153 said:
Look for the one which comes with UV light and UV activated adhesive.
There is plain glass with back side laminated sheet which needs to be peeled off. A UV activated glue that is liquid and needs to go on the screen over which the glass is placed.
Then its all like spreading butter between toasts. You must apply little pressure so it spreads over entire screen then use the UV light to harden it.
Its the best i have found yet after nearly 10 screen protector. It need expertise and is not for the faint of heart. Good luck
Click to expand...
Click to collapse
I would have to say shy away from applying pressure as it pushes the glue out of areas causing an uneven layer of glue & possibly bubbles. If you put a 50 cent size globon one end of it and tip the phone towards the opposing end it will run down the phone and as your doing that you just let the screen protector drop onto the glue ever so slightly from one end to the other and just let it spread it will eventually spread every time if you use enough glue.... cover up your speakers with tape. Just my Insite an experience with using pressure and not using pressure. Otherwise good advice
Liftkit said:
I would have to say shy away from applying pressure as it pushes the glue out of areas causing an uneven layer of glue & possibly bubbles. If you put a Big Blob on one end of it and tip the phone towards the opposing and it will run down the phone and as you doing that you just let the screen protector drop onto the glue ever so slightly from one end to the other and just let it spread it will eventually spread every time if you use enough glue. Just my Insite an experience with using pressure and not using pressure. Otherwise good advice
Click to expand...
Click to collapse
Nice, i faced issue when i dropped glue and put on the screen guard. It never went till the corners, even after adding more glue in second attempt. So i pressed a little and it went all the way to the edges.
Maybe im dropping glue in centre. I will try your method of starting from corner next time. Thanks :good:
Liftkit said:
Yeah sorry here they are..........
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/332744157134
https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.com/ulk/itm/271328437299
Click to expand...
Click to collapse
Out of curiosity can you take a picture of it after installation? Because those black edge lines make me skeptical.
franlando said:
Out of curiosity can you take a picture of it after installation? Because those black edge lines make me skeptical.
Click to expand...
Click to collapse
Skeptical of what?
andreasarxon said:
i use this and i am very happy..!
it is a uv glue tempered glass like whitestone but a lot cheaper. (i have used whitestone doom in the past and i put them in the same quality)
https://www.ebay.co.uk/itm/For-Sams...d7cc3eb20:m:mORLJDIrICxslUiTcMTsP8A:rk:2:pf:0
Click to expand...
Click to collapse
I got mine today. The setup was easy. Lest see how this holds up. Im very happy with this product, the best that I've tried so far.
Everyone should really get this instead of the whitestone!
Liftkit said:
Yeah sorry here they are..........
Click to expand...
Click to collapse
Do you use cases? Maybe you have alcantara and protective standing? Does this custom glued screen protector have any issues applying cases? Thanx
I don't like screen protectors but I saw prices for screen replacement in services - it's just crazy.
ler01 said:
Do you use cases? Maybe you have alcantara and protective standing? Does this custom glued screen protector have any issues applying cases? Thanx
I don't like screen protectors but I saw prices for screen replacement in services - it's just crazy.
Click to expand...
Click to collapse
If you use certain cases yes they will have issues, actually at least half of the ones Ive tried have caused the protector to lift. Also the glue that i use is not made for screen protectors, its for LCD screens replacements. THat being said its just 2500 LOCA glue. You MUST buy the 2500 or higher cuz anything lower in viscosity will make it near impossible to remove when it comes time to change out the screen proector
---------- Post added at 11:16 PM ---------- Previous post was at 11:12 PM ----------
ler01 said:
Do you use cases? Maybe you have alcantara and protective standing? Does this custom glued screen protector have any issues applying cases? Thanx
I don't like screen protectors but I saw prices for screen replacement in services - it's just crazy.
Click to expand...
Click to collapse
If you use certain cases yes they will have issues, actually at least half of the ones Ive tried have caused the protector to lift. Also the glue that i use is not made for screen protectors, its for LCD screens replacements. THat being said its just 2500 LOCA glue. You MUST buy the 2500 or higher cuz anything lower in viscosity will make it near impossible to remove when it comes time to change out the screen protector. Also the one case that i highly recommend for a glass screen protector and over all proection and looks, feel the whole 9 yards is the POETIC brand case Its perfect in eery way IMO.
Liftkit said:
If you use certain cases yes they will have issues, actually at least half of the ones Ive tried have caused the protector to lift. Also the glue that i use is not made for screen protectors, its for LCD screens replacements. THat being said its just 2500 LOCA glue. You MUST buy the 2500 or higher cuz anything lower in viscosity will make it near impossible to remove when it comes time to change out the screen proector
---------- Post added at 11:16 PM ---------- Previous post was at 11:12 PM ----------
If you use certain cases yes they will have issues, actually at least half of the ones Ive tried have caused the protector to lift. Also the glue that i use is not made for screen protectors, its for LCD screens replacements. THat being said its just 2500 LOCA glue. You MUST buy the 2500 or higher cuz anything lower in viscosity will make it near impossible to remove when it comes time to change out the screen protector. Also the one case that i highly recommend for a glass screen protector and over all proection and looks, feel the whole 9 yards is the POETIC brand case Its perfect in eery way IMO.
Click to expand...
Click to collapse
I will second this. It can be a pain to remove some of the loca at times