So, here is a little script, which I modified to work on Redmi Note 10 Pro (tested and working on sweet). I didn't create this, only modified it, so all credits goes to ghostrider_reborn.
Edit:
found another working encryption disabler (rmcrypt.zip), working out of the box, so no edit by me, main difference is better error handling - all credits goes to [email protected]
Edit2:
just to have all bases covered, and all info on one place, I attached encryption disabler script for OSS vendor based ROMs, originally created for POCO X3 NFC, but working as well on sweet, created by ghostrider_reborn, so all credits belongs to him...
DISCLAIMER: You know the drill - You are responsible for your own actions - if you choose to use this script on your phone - I am not responsible for any damage that may occurs while (or after) using this script - it works on my device, but I can't guarantee it will work on yours. Also removing encryption off your /data partition may have unforeseen consequences - for you, your data, your phone - this is a serious modifications of your phone - do it only if you know what you are doing - AT YOUR OWN RISK!
Requirements: unlocked bootloader, flashed custom recovery (OFOX, TWRP), flashed prebuilt MIUI vendor or OSS vendor
Installation: flash attached file in custom recovery
First use:
- flash attached file in custom recovery as the last thing before you reboot recovery (for example flash custom ROM, flash GAPPS, MAGISK and then as the last thing this script)
- mandatory! - do a FORMAT DATA confirmed by YES - this is one time only and needed to remove encryption from internal storage (/data partition) - WARNING! - FORMAT DATA will destroy all content on your internal storage - do a backup before you do so!
Usage:
- flash attached file in custom recovery as the last thing before you reboot recovery EVERY time you flashed a new custom ROM, flashed OTA of your installed custom ROM...
- - if you forget to do that, on the next boot to system your internal storage WILL BE ENCRYPTED!
Tested on:
Redmi Note 10 Pro (sweet) + custom ROMs
Not tested/supported :
MIUI itself
Credits:
encryption-disabler-sweet.zip: ghostrider_reborn
Disable_Dm-Verity_ForceEncrypt_20210320.zip: ghostrider_reborn
rmcrypt.zip: [email protected]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
˅˅˅ Important: for OSS vendor based ROMs use Disable_Dm-Verity_ForceEncrypt_20210320.zip ˅˅˅
Good work...I will try
Thank you for the post/modiciation and the original developer too for his work!
So when i want to change rom, I don't need to do a format data over and over again right?
*On my previous device (ginkgo) when i flashed a custom rom, I don't need to do a format data, i just need to flash this Disable dm verity zip and rom successfully booted without wiping my internal
galileogarin said:
So when i want to change rom, I don't need to do a format data over and over again right?
Click to expand...
Click to collapse
yes, hopefully
(on my previous device (surya) there was this one specific custom ROM (RRemix), for which wipe data was not enough and you must format data even on decrypted storage if you wanted to have clean flash/installation, so I do hope this will not be the case on sweet)
Hallo,
Can somebody confirm this script working?
i tried everything on the world but no suc6
format data x times not working
But i am tired to complete install a rom and all other stuff again and again
Fred Vlippenstein said:
Hallo,
Can somebody confirm this script working?
i tried everything on the world but no suc6
format data x times not working
But i am tired to complete install a rom and all other stuff again and again
Click to expand...
Click to collapse
You can check attached screenshots in OP, there you can see status of my phone - NOT ENCRYPTED. I achieve that by flashing the attached script and FORMAT DATA confirmed by YES. So yes, this script works, at least on my phone did...
added another working encryption disabler script (tested on sweet), check the OP
so which should i use?
rachadiadi said:
so which should i use?
Click to expand...
Click to collapse
- try rmcrypt.zip, it has at least some error handling, which can tell you, if something is wrong with the process of the disabling encryption
- the first one modified by me, is very basic, super simple one, which only blindly try to copy necessary files to the needed location, but never check if that is actually accessible or not, so in the end you'll never know, if that copy process really did what it should (I encountered at least one case, where first script says it finished successfully, but in the end, after reboot to system, my /data partition ended encrypted)
same here,update to miui 12.5 and flash the needed files phone is incrypted again but if i restore the miui v12.0.15 who was decrypted its decryped after reboot
strainge situationaa
no other solution found try every other options
MIUi stock indonesian is not SUPPORTED ?
arifn82 said:
MIUi stock indonesian is not SUPPORTED ?
Click to expand...
Click to collapse
MIUI in general not supported
jeryll said:
MIUI in general not supported
Click to expand...
Click to collapse
any known alternative work-around for miui?
arifn82 said:
any known alternative work-around for miui?
Click to expand...
Click to collapse
AFAIK not ATM
jeryll said:
AFAIK not ATM
Click to expand...
Click to collapse
previously i had a poco x2 and this was possible for that device
arifn82 said:
previously i had a poco x2 and this was possible for that device
Click to expand...
Click to collapse
you can also try latest Orange Fox recovery, which has built in switch for disable forced encryption and is optimized for work with MIUI, but if that actually works you'll need to find out by yourself...
jeryll said:
you can also try latest Orange Fox recovery, which has built in switch for disable forced encryption and is optimized for work with MIUI, but if that actually works you'll need to find out by yourself...
View attachment 5323251
Click to expand...
Click to collapse
will try and inform you !
arifn82 said:
will try and inform you !
Click to expand...
Click to collapse
did it work?
added another working encryption disabler script - this time for OSS vendor based ROMs (tested and working on sweet), check the OP
jeryll said:
added another working encryption disabler script - this time for OSS vendor based ROMs (tested and working on sweet), check the OP
Click to expand...
Click to collapse
Thank you
Related
Xperia 5 for OnePlus 6!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
Stock Xperia 5 Firmware
Debloated
Automated Flasher
Custom Kernel Support
Full GCam 7 Support
Decrypted
Performance tweaks
Dolby Atmos!
Xperia AOD!
Xperia Loops!
Game Enhancer!
3D Creator with Face Animation!
Side Sense!
What works:
Almost everything, check bugs!
What doesn't work / Bugs:
Framework bugs (Auto Rotation, Night Light etc)
Brightness is same as in Pixel Port so use built in JRC app for 100%
DT2W Fix:
Flash a custom kernel & run this command:
adb shell echo 1 > /proc/touchpanel/double_tap_enable
How to Install:
Make sure You're on Open Beta 8 Pie
Note: Backup Your nudes before flashing the ROM!
Boot TWRP
Flash OB8 OTA.zip
Format data/Wipe data (if decrypted)
Reboot to fastboot
Run flasher.bat
Wait for flasher to reboot automatically
Enjoy!
You can root after going through SetupWizard!
Download:
Xperia5 for OnePlus6 - October 4
Warning! DO NOT flash Xperia OTA's! They may brick Your phone! If You end up flashing one anyway, just use EDL mode or fastboot to go back to stock firmware.
If You have any other problems, just ask here on XDA or for the fastest support PM me or ask someone in my group on Telegram
Join my group!
If You'd like to support this and my other projects, You can donate
https://www.paypal.me/protodevnano
Credits:
Guzram for partial RIL fix and support and help!
erfanoabdi for vendor patcher idea.
FunkWizard/OnePlus for latest firmwares!
OnePlus for creating OP6!
My friend Dylan for always supporting me
If I forgot anyone, just PM me on Telegram!
XDA:DevDB Information
[ROM][PORT][9.0.0] Xperia 5 [04.10.19], ROM for the OnePlus 6
Contributors
ProtoDeVNan0
Source Code: https://github.com/OnePlusOSS/android_kernel_oneplus_sdm845/tree/oneplus/SDM845_P_9.0_Beta
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: OxygenOS Open Beta 8
Based On: Xperia
Version Information
Status: Stable
Created 2019-10-04
Last Updated 2019-10-04
I've used many phones (Galaxy Nexus, Galaxy S2, Galaxy Note 3, Mi Note 3,Mi A1... and many mores) and I've never been spoiled with so many ROMs like I have been with this phone and this incredible developer
You're doing God's work my man!
İncredible !!
Wow, wasn't expecting this at all. Reminds me of the good old XOSP, nice !
Thanks!
What custom kernel do you suggest to use this with? Is anything okay?
Thanks a lot
Coming from an Xperia fanboy - this is great!
Excitement
October security?
Looks great!!. Face unlock?
Thanks a lot for the ROM.
Unfortunately the framework bug is a big no-go for me, if it wouldn't be, it would definitely be my daily driver.
Looks Great!
Gonna try it out.
MDomokos said:
Looks Great!
Gonna try it out.
Click to expand...
Click to collapse
Wasn't able to get it to boot.
I used the MSM tool to go back to Oreo, updated to Open Beta 8, and then installed the Xperia Firmware. But I ended up in Qualcomm Crash Dump Mode both times I tried.
Do u Flash OB8 OTA.zip in both slot?
Author said that it's a MUST!
after flash it, wipe data and do the .bat flashing, good luck!
MDomokos said:
Wasn't able to get it to boot.
I used the MSM tool to go back to Oreo, updated to Open Beta 8, and then installed the Xperia Firmware. But I ended up in Qualcomm Crash Dump Mode both times I tried.
Click to expand...
Click to collapse
I just wonder why this ROM needs OB8 as Base which is quite old if I am not wrong or??
Which security Patch level has this Xperia 5 Port?
Invalid sparse file format at header magic. What's this, and why is it happening?
sky104hk said:
Do u Flash OB8 OTA.zip in both slot?
Author said that it's a MUST!
after flash it, wipe data and do the .bat flashing, good luck!
Click to expand...
Click to collapse
Thanks, got it to boot.
Here's what I did:
-Format data
-Flash OB 8 + TWRP
-Reboot recovery
-Flash OB 8 + TWRP
-Reboot Recovery
-Format data
-Boot to Fastboot Mode
-Flash .bat
I got stuck on setup wizard as it froze the phone. Then I modified build.prop to skip it, but now the phone keeps freezing and re starting.
Can someone give me the link to the Google Camera 7 that works on this system? I can't find it.
MDomokos said:
Thanks, got it to boot.
Here's what I did:
-Format data
-Flash OB 8 + TWRP
-Reboot recovery
-Flash OB 8 + TWRP
-Reboot Recovery
-Format data
-Boot to Fastboot Mode
-Flash .bat
I got stuck on setup wizard as it froze the phone. Then I modified build.prop to skip it, but now the phone keeps freezing and re starting.
Click to expand...
Click to collapse
After flashing u can go back to TWRP and wipe data, install MAGISK and see
or u can flash custom kernel to see if solve the auto reboots and freeze
sky104hk said:
After flashing u can go back to TWRP and wipe data, install MAGISK and see
or u can flash custom kernel to see if solve the auto reboots and freeze
Click to expand...
Click to collapse
Thanks, I'll try it when I have some time.
Just to make sure, I should go into TWRP after the first boot of the Xperia Firmware. Then wipe data, not format data, then flash Magisk and later kernel if still not working?
MDomokos said:
Thanks, I'll try it when I have some time.
Just to make sure, I should go into TWRP after the first boot of the Xperia Firmware. Then wipe data, not format data, then flash Magisk and later kernel if still not working?
Click to expand...
Click to collapse
Yes exactly and Wipe data not Format.
Guess I will give that ROM a try as well.
MI MAX 2
Android 11 by DJsmk123
1.INTRODUCTION
Well, Android 11, Google’s 11th iteration looks similar to Android 10 but with a handful of new features and changes. The update brings notification history, Chat bubbles, Conversation notifications, screen recorder, new media controls, smart device controls, one-time permission, improved dark theme with the scheduling system, app suggestions, wireless android auto, and many more....
2.Installation Guide
1.First Download AOSP11.zip
2.Now From Any recovery backup your device
Note:Recommended Recovery Orange Fox Recovery
3.Now Wipe all Partition except internal storage
4.Now Install AOSP11.zip
5.if during installation of AOSP11.zip its stuck and reboot to fastboot then try again install without wiping system its will works.
6.Reboot To System and Your Android 11 is Ready to go...
3.Workings
WiFi, Bluetooth, RIL, etc
4.Known Issues
Camera,Flashlight,Fingerprint[Major Issue but i am trying to resolve them]
5.Download Link: https://www.mediafire.com/file/b6v8nilxctnfkf5/aosp11.zip/file [Gapps Included]
6.Source
1.Rom source: https://github.com/phhusson/treble_experimentations/releases
2.Kernel Source:
https://forum.xda-developers.com/t/gsi-vendor-for-mm2-oxygen-by-team-o-8322.4139599/
as this post do not contain Kernel Source so i do not have kernel source....
Note: There is some three Major Bugs camera , Fingerprint And Flashlight and I am trying to resolve them but as i am not developer so its not easy for me
here i will provide log-cat error behind these errors and any one who is interested to resolve them his help will be appreciated as far as these errors the rom is perfect to use in daily life.....
{
CANNOT LINK EXECUTABLE "/system/vendor/bin/mm-qcamera-daemon": library "libgui.so" not found: needed by /vendor/lib/libmmcamera2_stats_modules.so in namespace (default)
CANNOT LINK EXECUTABLE "/vendor/bin/hw/[email protected]": library "libgui.so" not found: needed by main executable
CANNOT LINK EXECUTABLE "/vendor/bin/hw/[email protected]": library "libkeystore_aidl.so" not found: needed by main executable
}
Warning:I am not responsible to anything happen with your device if you are come here then you know what are you doing...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nice to see A11 booted on Mi max 2. Fingerprint for mido A11 is working. The same fix used for mm2 for A10 may be it works for A11 too. Trying aosp-phh now..
Kunal panchal said:
Nice to see A11 booted on Mi max 2. Fingerprint for mido A11 is working. The same fix used for mm2 for A10 may be it works for A11 too. Trying aosp-phh now..
Click to expand...
Click to collapse
Thankyou...
I will try this.
DJsmk123 said:
Thankyou...
I will try this.
Click to expand...
Click to collapse
You should also check Mi Max2 telegram channel, there are newer kernels and roms. Perhaps you can find necessary libs from them.
DJsmk123 said:
Thankyou...
I will try this.
Click to expand...
Click to collapse
I tried your A11 with mochi fix. Fingerprint works perfectly.
Release GF3258-FP Fix · Jebaitedneko/mochi-porter
This patch ports over Vince HALs and some modded ones to other devices with Goodix-GF3258 fp sensor to enable fp functionality. Should work till A10. Take backup of /vendor before flashing. NOTE: T...
github.com
asdfg34 said:
I tried your A11 with mochi fix. Fingerprint works perfectly.
Click to expand...
Click to collapse
Pls provide me this fix link
DJsmk123 said:
Pls provide me this fix link
Click to expand...
Click to collapse
I edited my previous message.
I love my Mi Max 2 (currently with EvoX 4.7) and it's great to see ongoing development . Looking forward to trying a future release - thank you
Thats so satisfying hearing about A11 for our XIAOMI MI MAX 2.... thanks to you for working hard to give our community a good bugless rom for our MAX 2.
Hey man how are , i flashed the rom doing all the wipping , but after boot logo it says , file ayatem corrupt asking for password . I have entered the password , it says system files damaged or corrupt. What can i do
enius6 said:
Hey man how are , i flashed the rom doing all the wipping , but after boot logo it says , file ayatem corrupt asking for password . I have entered the password , it says system files damaged or corrupt. What can i do
Click to expand...
Click to collapse
I think you should try orange fox recovery and wipe all partition except internal storage now install asop11.zip
It may be go fastboot do not worry go again recovery flash asop11.zip without mount and dismount partitions.
If you find error again then send me screenshot of the error..
DJsmk123 said:
I think you should try orange fox recovery and wipe all partition except internal storage now install asop11.zip
It may be go fastboot do not worry go again recovery flash asop11.zip without mount and dismount partitions.
If you find error again then send me screenshot of the error..
Click to expand...
Click to collapse
I have done it like you said , wiped all tha partitions expect internal , clean flash using orange recovery i got this error . I have flashed again without wiping just like as you saying and got the rror again. It hasn't stuck at boot loader . I will try again and send you the screenshot
enius6 said:
I have done it like you said , wiped all tha partitions expect internal , clean flash using orange recovery i got this error . I have flashed again without wiping just like as you saying and got the rror again. It hasn't stuck at boot loader . I will try again and send you the screenshot
Click to expand...
Click to collapse
Try to flash firmware first then OS
enius6 said:
I have done it like you said , wiped all tha partitions expect internal , clean flash using orange recovery i got this error . I have flashed again without wiping just like as you saying and got the rror again. It hasn't stuck at boot loader . I will try again and send you the screenshot
Click to expand...
Click to collapse
It is because of Android security, you have to format internal sd to avoid this error.
enius6 said:
I have done it like you said , wiped all tha partitions expect internal , clean flash using orange recovery i got this error . I have flashed again without wiping just like as you saying and got the rror again. It hasn't stuck at boot loader . I will try again and send you the screenshot
Click to expand...
Click to collapse
Plz provide me screenshot as well as if possible logcat
DJsmk123 said:
MI MAX 2
Android 11 by DJsmk123
1.INTRODUCTION
Well, Android 11, Google’s 11th iteration looks similar to Android 10 but with a handful of new features and changes. The update brings notification history, Chat bubbles, Conversation notifications, screen recorder, new media controls, smart device controls, one-time permission, improved dark theme with the scheduling system, app suggestions, wireless android auto, and many more....
2.Installation Guide
1.First Download AOSP11.zip
2.Now From Any recovery backup your device
Note:Recommended Recovery Orange Fox Recovery
3.Now Wipe all Partition except internal storage
4.Now Install AOSP11.zip
5.if during installation of AOSP11.zip its stuck and reboot to fastboot then try again install without wiping system its will works.
6.Reboot To System and Your Android 11 is Ready to go...
3.Workings
WiFi, Bluetooth, RIL, etc
4.Known Issues
Camera,Flashlight,Fingerprint[Major Issue but i am trying to resolve them]
5.Download Link: https://www.mediafire.com/file/b6v8nilxctnfkf5/aosp11.zip/file [Gapps Included]
6.Source
1.Rom source: https://github.com/phhusson/treble_experimentations/releases
2.Kernel Source:
https://forum.xda-developers.com/t/gsi-vendor-for-mm2-oxygen-by-team-o-8322.4139599/
as this post do not contain Kernel Source so i do not have kernel source....
Note: There is some three Major Bugs camera , Fingerprint And Flashlight and I am trying to resolve them but as i am not developer so its not easy for me
here i will provide log-cat error behind these errors and any one who is interested to resolve them his help will be appreciated as far as these errors the rom is perfect to use in daily life.....
{
CANNOT LINK EXECUTABLE "/system/vendor/bin/mm-qcamera-daemon": library "libgui.so" not found: needed by /vendor/lib/libmmcamera2_stats_modules.so in namespace (default)
CANNOT LINK EXECUTABLE "/vendor/bin/hw/[email protected]": library "libgui.so" not found: needed by main executable
CANNOT LINK EXECUTABLE "/vendor/bin/hw/android.hardware.[email protected]": library "libkeystore_aidl.so" not found: needed by main executable
}
Warning:I am not responsible to anything happen with your device if you are come here then you know what are you doing...
View attachment 5159823View attachment 5159825View attachment 5159827View attachment 5159829View attachment 5159837View attachment 5159833View attachment 5159835
Click to expand...
Click to collapse
New patchs for fingerprint
1.For Goodix Fingerprint flash Mochi-fix.zip
2.For FPC First flash Mochi-fix.zip and then fpc.fix
for Camera stay tune...
Some Android 11 Rom on the way...
DJsmk123 said:
New patchs for fingerprint
1.For Goodix Fingerprint flash Mochi-fix.zip
2.For FPC First flash Mochi-fix.zip and then fpc.fix
for Camera stay tune...
Some Android 11 Rom on the way...
Click to expand...
Click to collapse
I don't know what the problem might be with the camera but do you have any idea when that might be fixed please?
Thanks for your work.
thewizardoz said:
I don't know what the problem might be with the camera but do you have any idea when that might be fixed please?
Thanks for your work.
Click to expand...
Click to collapse
This vendor image based on android 9 and android 10(Not perfectly) so all libs of camara not working perfectly with android 11 system libs and for updating libs I have to find them and link to system.
Actually i am working on this phone it's sad that I have no extra phone for my personal use.
I can't say how much time...
Thanks for your appreciation
[delete]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device while also attempting to bringing many of the best features that exist today.
Features:
https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn
Installation:
1. Make sure you have fw 21.4.1 or later installed
2. On some devices a full miui V12.1.5.0 flash was required (fastboot version) before flashing the fw
3. Download alibei's TWRP here
(This TWRP supports to take a backup of persist. I am not responsible if you loose RIL, WIFI, etc...
if you break persist)
4. Flash my TWRP or your ROM does not work
5. Wipe Dalvik/Art Cache, Cache, System, Product and Vendor
6. (Yes you have to wipe product. The old partition name was cust, but we use it now as product)
7. Format data
8. Reboot to recovery
9. Download crDroid and copy it to your device
10. Flash crDroid
11. Download OpenGapps Test Nano - most stable gapps package for this ROM.
Update the ROM:
1. Download the newest crDroid version
2. Copy it to your phone
3. Flash crDroid in the recovery
4. Wipe dalvik
5. You don't have to flash Opengapps again
6. Reboot
Download: ROM
Working:
Fingerprint (FOD)
Face Unlock
WiFi
Video playback
Audio
Sensors
IR blaster
NFC
GPS
RIL
VoLTE
Bluetooth
Camera (all lenses)
3rd party FOD
Bugs:
Fast charging (at full speed, currently limited to a low wattage)
Sources:
ROM Source
Kernel Source
Device Source
Big thanks to @alibei and @Chemuski1 for making this possible.
EonOfBlack said:
Big thanks to @alibei and @Chemuski1 for making this possible.
Click to expand...
Click to collapse
Bravo, first crDroid build for tucana!
no gestures...
NameUsLegion said:
no gestures...
Click to expand...
Click to collapse
Hey there! I'm sorry, I must have forgotten to add the patch to fix them. The next time I build the ROM I'll try to fix them.
One of the most best Android ROMs. Hope to see more CrDroid development, good work
NameUsLegion said:
no gestures...
Click to expand...
Click to collapse
What gestures are missing? I've gone through and looked, and navigation gestures work perfectly.
EonOfBlack said:
Hey there! I'm sorry, I must have forgotten to add the patch to fix them. The next time I build the ROM I'll try to fix them. How is everything else?
Click to expand...
Click to collapse
EonOfBlack said:
What gestures are missing? I've gone through and looked, and navigation gestures work perfectly.
Click to expand...
Click to collapse
I just don't have them. Using fluid
NameUsLegion said:
View attachment 5327433
I just don't have them. Using fluid
Click to expand...
Click to collapse
Go into crDroid settings in the settings app, go to stock navbar settings, then into System navigation. There should be options for navigation gestures.
EonOfBlack said:
Go into crDroid settings in the settings app, go to stock navbar settings, then into System navigation. There should be options for navigation gestures.
Click to expand...
Click to collapse
Oh rly... Thanks , my bad
NameUsLegion said:
Oh rly... Thanks , my bad
Click to expand...
Click to collapse
Sorry, it's a little hard to find.
Thanks for the ROM!
I couldn't find "OpenGapps Beta Nano" as mentioned in instructions for Android 11, however I was able to successfully boot with: NikGapps-core-arm64-11-20210601. I tried basic before this and failed to boot.
kiwimato said:
Thanks for the ROM!
I couldn't find "OpenGapps Beta Nano" as mentioned in instructions for Android 11, however I was able to successfully boot with: NikGapps-core-arm64-11-20210601. I tried basic before this and failed to boot.
Click to expand...
Click to collapse
Sorry, my mistake. It's called 'OpenGapps Test', which can be found here. https://sourceforge.net/projects/opengapps/files/arm64/test/. I have also added the link into the original post. While NikGapps might work, there may be a few bugs.
@EonOfBlack I installed your suggested package after I had issues with a specific app crashing. Are there any tips on ways I can debug it? I extracted the logs and see it gets a SIGSEGV, but I'm not that familiar with the Android logs so I don't know what to look for exactly.
Or would this actually be more of a problem with OpenGapps being beta? I had the same problem with NikGapps btw.
Other apps work just fine and overall it seems like a super nice ROM. Thank you!
kiwimato said:
@EonOfBlack I installed your suggested package after I had issues with a specific app crashing. Are there any tips on ways I can debug it? I extracted the logs and see it gets a SIGSEGV, but I'm not that familiar with the Android logs so I don't know what to look for exactly.
Or would this actually be more of a problem with OpenGapps being beta? I had the same problem with NikGapps btw.
Other apps work just fine and overall it seems like a super nice ROM. Thank you!
Click to expand...
Click to collapse
Sorry for the late reply. While I have not had this issue myself, another user has and I have been informed about it. I don't think it would be the Gapps package causing the issue. When you say that you 'extracted the logs' where did you find these? The provided 'MatLog' app is an easy way of capturing a logcat. The next time it happens, can you please send me a logcat using this app?
Camera (all lenses) = What is the camera app (ANX)?
Logitech21 said:
Camera (all lenses) = What is the camera app (ANX)?
Click to expand...
Click to collapse
It's the GCam port by Burial.
Hello,
This Rom requared base 12.4.1 or V12.1.5.0. My device is Android 10 custom rom Global . I need flash to Adtroid 11 China Rom V12.1.5.0 after which I install this rom.
If I decide to go back to Android 10 global Will I have problems (AntiRolock) or other?
edit: A little reading helped my question
Code:
5/06/21
- Updated to latest version of kernel
gpay sometimes crashes asking to unlock the screen and crashes. Payment does not go through
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Swx ROM Galaxy A71:
Hi guys, here I share my ROM for the Galaxy A71, I am not responsible for damaged phones, install at your own risk.
This rom was born from the need to have root or some other modification in stock but Samsung has included many limitations which make it difficult to modify in stock.
IMPORTANT:
Using a custom kernel is possible but watch out for possible bugs.
It is recommended that you install the latest firmware to avoid compatibility bugs, use the latest version of TWRP recovery...
TWRP: xda-developers.com/t/android-11-recovery-a715f-twrp-3-5-1...
Spoiler: Features
Debloat
vaultkeeper disabled
FRP removed
knox counter at 0 (Samsung Health)
Fingerprint animation changed
optimizations
Google Discover enabled
Dolby without headphones
Apply themes without trial time limit
Deknoxed
Full Edge Lighting (extra effects unlocked)
Secure Folder working
Performance and battery improvements
Enhacend processing mode
Some updated apps
and more
BUGS: At the moment it has not reported any bug.
Installation:
Extract Swx ROM with an unzip program
Reboot recovery
Format data
Install ROM as "super" image in TWRP
Flash BluetoothFIx
Flash muiltidisabler
Flash Magisk (optional)
Reboot
Downloads:
Version 1:
Link: Google Drive
Credits:
@Gollo99 - Help and suggestions
@SuperR. - kitchen SuperR to make the rom
@Nico04 - Help and suggestions
@3arthur6 - Fixed bluetooth pairing
@BlassGO - Mods secure folder and samsung themes
@itz_rogue_77 - Help, suggestions, and more
@ShaDisNX255 - Help and suggestions
@samsung - Firmware
Kernel Source:
Samsung Open Source
opensource.samsung.com
Paypal: Paypal.me...
if you want to support the project
XDA: DevDB Information
Swx, ROM for the Samsung Galaxy A71
ROM OS Version: Android 11
Based On: ONE UI 3.1
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2021-06-09
Wow nice! Unfortunately I have installed lineageos from the guy next door
Nice to see, great job!
Very good job, tested on my A715F, working really good. Keep up the good work
Great !!!
On what security patch level is based ?
It's safe to flash over NcX 3.1.2 ?
viktor92 said:
Great !!!
On what security patch level is based ?
It's safe to flash over NcX 3.1.2 ?
Click to expand...
Click to collapse
The ROM is based on the latest firmware from the INS region. I would always recommend a clean installation.
viktor92 said:
Great !!!
On what security patch level is based ?
It's safe to flash over NcX 3.1.2 ?
Click to expand...
Click to collapse
In theory it's safe, but have to disable screen lock and encryption to have chances to be safe
kirbyNx said:
The ROM is based on the latest firmware from the INS region. I would always recommend a clean installation.
Click to expand...
Click to collapse
Juat as a curiosity, where is INS?
Bluetooth fix gives error 1 on TWRP
Pupet_Master said:
Bluetooth fix gives error 1 on TWRP
Click to expand...
Click to collapse
Try here: https://forum.xda-developers.com/t/...s-loss-android-11-10-pie-oreo-nougat.4017735/
Pupet_Master said:
Juat as a curiosity, where is INS?
Click to expand...
Click to collapse
India
kirbyNx said:
Try here: https://forum.xda-developers.com/t/...s-loss-android-11-10-pie-oreo-nougat.4017735/
Click to expand...
Click to collapse
Can be used the Bluetooth Library Patcher for Magisk instead ?
Pupet_Master said:
In theory it's safe, but have to disable screen lock and encryption to have chances to be safe
Click to expand...
Click to collapse
Yeah, I'm already unencrypted, but my last and only TWRP backup after the phone repair was with screen pattern and fingerprints disabled...
I'm on faizauthar12 kernel that is for A11 BUB5 stock rom, this is my concern flashing only super.
kirbyNx said:
Try here: https://forum.xda-developers.com/t/...s-loss-android-11-10-pie-oreo-nougat.4017735/
Click to expand...
Click to collapse
Thanks m8
viktor92 said:
Yeah, I'm already unencrypted, but my last and only TWRP backup after the phone repair was with screen pattern and fingerprints disabled...
I'm on faizauthar12 kernel that is for A11 BUB5 stock rom, this is my concern flashing only super.
Click to expand...
Click to collapse
Ok so i dirtflashed, everything is working fine (but when i reboot the phone it give a message it didnt before, it says some carrier apps need upgrade but it fail to do so).
1 - Disable lockscreen on the ROM
2 - Delete the lockscreen db files via TWRP on Data/System
3 - Nanobackup
4 - Dirt flash the ROM
Besides this error, that is nothing really, it's working fine and quite faster than NcX
Pupet_Master said:
Ok so i dirtflashed, everything is working fine (but when i reboot the phone it give a message it didnt before, it says some carrier apps need upgrade but it fail to do so).
1 - Disable lockscreen on the ROM
2 - Delete the lockscreen db files via TWRP on Data/System
3 - Nanobackup
4 - Dirt flash the ROM
Besides this error, that is nothing really, it's working fine and quite faster than NcX
Click to expand...
Click to collapse
Your are tempting me to follow your steps...
Disabling lock pattern and erasing fingerprints it's not enough ?, what files have you deleted ?
I suppose that nanobackup is nandroid backup right ?
forget this
...
viktor92 said:
Your are tempting me to follow your steps...
Disabling lock pattern and erasing fingerprints it's not enough ?, what files have you deleted ?
I suppose that nanobackup is nandroid backup right ?
Click to expand...
Click to collapse
Yes, it's the TWRP nano backup.
For me just disable it wasn't enough, the files are:
https://appuals.com/wp-content/uploads/2017/04/Android-Security-PIN-1.png
Ok so Google Pay isn't Working anymore, on NcX with magisk it was.
Also, the CID Manager message about the carrier update is annoying. I feel it's not due to dirt flash
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OrangeFox Recovery is one of the most popular custom recoveries, with amazing additional features, fixes and a host of supported devices.- Warnings :
Your warranty is now void, or not... (i have no idea bruh)
・ I'm not responsible for bricked devices, thermonuclear war or alarm app fails.
・ If it's your first time or you're unexperienced with flashing ROMS, please do some search before flashing!
・ YOU are choosing to make these modifications, you're the only responsible guy for messing up if you do so.
- Informations :
- Was built on the 11th of September 2022.
- Maintained by kota. (me)
- Used Kernel : Here!
- What's broken ?
- The Status Bar can now be totally seen but doesn't totally fit.
- Vibration still doesn't work normally (there have been changes to it tho)
- Please report anything else if you do find an issue!
- Installation Guides :
- Notes :
A glitch may happen where booting it via fastboot makes touch doesn't work sometimes.
To fix that, i also provided a flashable zip via sideloading (tested on TWRP) that directly installs it.
- First way to install : (Casual way, if touch works okay | .img )
1 · Reboot into bootloader and boot OrangeFox by using this command : fastboot boot OrangeFox.img
2 · Once the Recovery boots up, go to 4th menu (3 lines), and on it, click "More".
3 · Then click More, and Flash Current OrangeFox Recovery, then swipe and reboot!
- Second way : (More tricky, but always works out fine | .zip )
1 · Reboot into Recovery Mode with TWRP installed.
2 · Prepare an ADB Session on your PC and add to it the .zip version of OrangeFox.
3 · Get into Sideload Mode and do this command on adb : adb sideload OrangeFox_Name_Example.zip
- You're now done with flashing!
- Download Links :
- OrangeFox Folder (ZIP + IMG version) : Here!
- End :
Well, here it is! Real working OrangeFox for Mi 11.
At first it was just a random idea that went threw my head two month ago.
Now it's a real thing, it was really time consuming and head scratching but it was all worth it!
Enjoy and have a nice day!
By kota.
Please note!
For the second flashing method, TWRP isn't really "required", it's more to assure that your recovery let's you sideload any unsigned packages. You should be able to flash from some recoveries such as Pixel Experience and ArrowOS recovery.
As for unsupported ones such as CherishOS, RiceDroid, etc... They'll probably throw an Error 21 when trying to sideload any unsigned packages. (in this case, Orangefox but could also be Magisk) For them, simply use TWRP.
Reserved! #2
does this allow full backup and restore of the ROM?
Sage said:
does this allow full backup and restore of the ROM?
Click to expand...
Click to collapse
The "quick backup" (whatever it is) provides a backup of data and boot partitions. I'm not totally sure that the quick backup option is related to the one on main screen tho
Hello, thanks for your work, this recovery is amazing !
Appreciate the great work!
Is this recovery working fine for A12 custom roms? (In terms of data/internal storage decryption)
bongmeiister said:
Appreciate the great work!
Is this recovery working fine for A12 custom roms? (In terms of data/internal storage decryption)
Click to expand...
Click to collapse
Yup it works, at least with Pixel Experience it works. You just have to type in your code because the partition is encrypted
Nysioko said:
Yup it works, at least with Pixel Experience it works. You just have to type in your code because the partition is encrypted
Click to expand...
Click to collapse
Great, currently I'm running Evolution X with newest TWRP and there the recovery has problems with decrypting the internal storage - no matter what I try. I think it was not made for Android 12. https://wiki.orangefox.tech/en/guides/encryption Android 12 Custom Recoveries
What code do you mean to decrypt the partition? - Thanks for your response
bongmeiister said:
Great, currently I'm running Evolution X with newest TWRP and there the recovery has problems with decrypting the internal storage - no matter what I try. I think it was not made for Android 12. https://wiki.orangefox.tech/en/guides/encryption Android 12 Custom Recoveries
What code do you mean to decrypt the partition? - Thanks for your response
Click to expand...
Click to collapse
The code to decrypt the partition is the same you had to put in to lock your phone. Say you have a pin code of 3926, just type 3926 to unlock the score from orangeFox
bongmeiister said:
Appreciate the great work!
Is this recovery working fine for A12 custom roms? (In terms of data/internal storage decryption)
Click to expand...
Click to collapse
Of course it's made for A12
First link is dead
Nysioko said:
First link is dead
Click to expand...
Click to collapse
Oops! Fixing that
kotalol said:
Oops! Fixing that
Click to expand...
Click to collapse
Thanks
Excellent, working perfectly!
(other than vibration, which is very weird indeed!)
Hoping you will continue your great work, and build for A13...
nelvinchi said:
Excellent, working perfectly!
(other than vibration, which is very weird indeed!)
Hoping you will continue your great work, and build for A13...
Click to expand...
Click to collapse
Yep, A13 is coming soon...
With A13 decryption support, fix trial to vibration, removal of flashlight button, base on latest sekaiacg TWRP and much better holepunch handle!
Does it recognize and mount USB OTG? So I can do backups to USB storage?
seemebreakthis said:
Does it recognize and mount USB OTG? So I can do backups to USB storage?
Click to expand...
Click to collapse
Not yet because of the used kernel in pre-release, the next version will probably support ExFat USB OTG.
Hi, does anyone knows that this recovery works for Xiaomi EU roms ? Thank you !
epcwong said:
Hi, does anyone knows that this recovery works for Xiaomi EU roms ? Thank you !
Click to expand...
Click to collapse
It does!