Related
Hello everyone,
I've just tried installing twrp-3.0.2-3-thea.img (md5sum: 35c37561f0c22bfe23cd01b5c388e8b5) and BETA-SuperSU-v2.62-3-20151211162651.zip (md5sum: 7fcb30bcbcd18b5f0b0f5848a096d4ed) on a Moto G LTE 2014 "Thea".
Unfortunately something didn't work. The device first was stuck in the boot animation, then started booting correctly a few times, but now it's completely bricked:
I've been unable to turn the phone on using either pressing power+button down for 10 secs or just pressing the power button for 2 mins while being connected to an usb charger. Obviously it won't connect to adb/fastboot/etc.
I'm really puzzled. Is it even possible to brick a device like this just by trying to root it? Any suggestions?
Alright, found the issue - it seems that for some reason or another flashing TWRP or SuperSu caused fastboot to stop working, hence the hard brick. Now It shows up as "qhsusb_bulk" - unfrotunately there's no way to fix this by myself given that the only fastboot images ( "MBM-CI") available are for Android 4.4.4.
If your bootloader is unlocked you shouldn't have any problems reflashing. You do however have to make sure you are flashing the correct recovery IMG for your phone there are a very large number of ROMS and each is device specific. Try leaving LTE out of your search criteria when searching for images to flash with, rather just Moto G 2nd gen 2014 and you will be on your way to finding the correct IMG. I found a Titan IMG that works with my XT1072 and believe you me that was after the 5th/6th time of reflashing! Another handy tip is that in order to enter into fast boot or recovery mode there's are a few things to consider, namely
The version of fastboot adb you have installed on your PC, some versions behave strangely? Don't ask me I know nothing!
Secondly and very importantly you need to have latest drivers for your make and model of phone installed on your PC.
Thirdly before you connect your phone via its USB cable to PC you must first start up fastboot if you are just using fastboot. I have mine sitting as shortcut on desktop right next to adb shortcut for convenience.
Fourth: hold power button plus vol down for about 3-5 seconds, continue to hold vol- button but let go of power button (this is an important detail that many people on the forum forget to mention) with Motorola specifically!!!! Trust me do it this way and you will almost certainly always boot into recovery/fastboot mode
5th connect your phone to your PC ( not to teach your grama how to suck eggs but don't forget to select USB debugging under dev options on your phone) hopefully you did this??? Otherwise I don't know what the work around is for that, other than factory reset and start over?!
Anyway after connect to PC in the shell terminal run the adb devices command if you are in adb or
run the fastboot devices if you are in fastboot to see if your computer can detect your device? This is a clear indication of whether or not your bootloader is unlocked and/or whether USB Debugging is selected, shouldn't be hard to work out which device is yours as only one device should then show up. There are threads on XDA about how to unlock BL. Aquire root and flash recovery images, obviously, but I couldn't begin to tell you how to do that as each scenario is so different from the next, best of luck!:good:
None of those solutions would obviously work, considering the bootloader/fastboot partition has been altered to the point the device won't boot at all, forget about Drivers or USB Debugging.
By the way, I've just got my device from motorola, after roughly two months since they took it to the repair centre. Their official response has been "We won't fix devices who had been tampered with".
Oh well. When I got it back the clerk could only congratulate me for my really nice new paperweight.
The phone isn't starting at all? It shows something on the screen or acts just like powered off?
Now It shows up as "qhsusb_bulk"
Click to expand...
Click to collapse
You mean the PC isn't recognizing the phone at all and just shows an USB device with that identifier?
LuuchoRocha said:
The phone isn't starting at all? It shows something on the screen or acts just like powered off?
Click to expand...
Click to collapse
Completely blank screen. No response whatsoever.
You mean the PC isn't recognizing the phone at all and just shows an USB device with that identifier?
Click to expand...
Click to collapse
That's right. It's the same error which occurs on some MSM89xx SoCs when the bootloader/blankflash gets steamrolled. But contrary to what happens to some devices like the Galaxy SIII, there are no available bootloader image files available anywhere, and it looks like the SoC used on mot g devices does not provide any failsafe boot mode from sd.
In other words, it's a really nice paper weight until a disgruntled Lenovo employee leaks the required files somewhere. Actually, according to the Motorola tech guy I've spoken to, there's the chance that clearing the bootloader triggers an efuse making it impossible to recover from altogether, but I really hope this is not the case.
I recently bought this device. I usually root/unlock bootloader on my devices. I haven't attempted anything on this watch yet, but I did try to enter recovery mode. I reset the device and waited for the screen to turn off. Once the screen turned on and showed the LG insignia, I swiped my finger from the top left corner down to the bottom right (as I read on another post). This took me to the bootloader. After that, I selected the recovery option. This caused the classic Android with it's chest open, red triangle, with an exclamation point. My current phone (OnePlus 3) has an unlocked bootloader and root. I doubt it's related, but could that be causing an issue since they're connected? Android Pay works on the watch even though it won't work on the rooted phone.
Is there not a stock recovery on this device, is it locked, or is this a result of the current state of my phone?
The red triangle means a fatal loading error and all processes have ceased. In other words it isn't letting you into the recovery, same if you hold the two buttons you can get to the bootloader but selecting recovery gives you the same result.
Even if you managed to get to the recovery, there is no known way to connect it to the PC, so you cannot unlock the bootloader.
matejdro said:
Even if you managed to get to the recovery, there is no known way to connect it to the PC, so you cannot unlock the bootloader.
Click to expand...
Click to collapse
No known way to connect it while in the bootloader menu? I've been using it with Android Studio to work on watch faces and an instrument tuner. I haven't tried connecting while in the bootloader menu though.
The command is:
adb connect (your watch ip address)
Thinking about it though, I think they both have to be on the same WiFi network. Maybe it's not possible.
This only works with ADB (when watch is fully turned on). It does not work with bootloader.
Works on download mode as well but couldnt get anything to do in there
Grumps said:
Works on download mode as well but couldnt get anything to do in there
Click to expand...
Click to collapse
Do tell more. You can actually connect to the watch when it is in download mode?
matejdro said:
Do tell more. You can actually connect to the watch when it is in download mode?
Click to expand...
Click to collapse
Yes had to setup my home wifi to be open. then reboot in download mode
But as i said once in download i dunno what we can try?
Gets IP adress which is the same ip it gets with adb and can connect with adb on that ip so it is possible to connect to wifi somehwo in that download mode.
Youtube Video : https://youtu.be/IVNmEXj-6Pk
Trying to get lg Flash tool to connect but need dll. it has network option so it should be possible
Can even ping the ip so we should be able to do something?
Wow that is awesome. I assume this could be used to flash custom recovery (and subsequently root the device), if somebody figures out how.
matejdro said:
Wow that is awesome. I assume this could be used to flash custom recovery (and subsequently root the device), if somebody figures out how.
Click to expand...
Click to collapse
Hopefully. Older Samsung phones are rooted via download mode so maybe it will be possible somehow
Well, I plan to try it as well, using your findings (thx!) with this.Wish me luck. Having flashing available is just one step. we don't have twrp or magisk yet
Hello, could you please repost your video? because I am trying to do the same, and I am failing. I set up guest wifi between my laptop and the watches. it is not protected by any password/wpa. watches are pingable, and I am able to adb to it. but after rebooting to bootloader, I am unable to connect. I would like to perform at least oem unlock, but I can't, as I am unable to connect to it.
Could you please provide more detailed howto?
BTW, that red exclamation mark while in Recovery: Press crown button and top button once at the same time. Recovery will open.
From there, we can sideload ZIP. Question is, what zip? I can only assume that it has to be genuine firmware (OTA) and that it has to be downloaded to internal memory prior of rebooting to recovery. So manual update is possible.
Problem I have right now is, that bootloader is locked, and in order to unlock it, we'll need fastboot connection. But the bootloader in the watch does not support so called 'SoftAP' feature. Seems like it will need an update from Google. But when this will happen I don't know. Possibly with Android 9 update? There must be a way, but LG says that they do not share technical specs, ATT gave me unlock code (I assume for SIM unlock, but my watches are already SIM unlocked). Any ideas? There has to be a way to connect to watch once in recovery, download or bootloader (all three modes are fully functional, just without wireless connectivity).
Question
Virnik0 said:
BTW, that red exclamation mark while in Recovery: Press crown button and top button once at the same time. Recovery will open.
.
Click to expand...
Click to collapse
I have a Ticwatch Pro and am trying to get past the exclamation/no command screen when going into recovery. I have tried literally every combination of button presses with the two side buttons and still cannot get any results. Google searches have turned up little in the way of solutions. So, to all the smart folks here on XDA, how can I get this damn watch into recovery!?!?
(background on why - didn't wear the watch for a few weeks, watch battery dies. When charged and rebooted, got a message that my watch was locked with find my device. From there, I have tried all my potential passwords to unlock but nothing worked. I am left to reset outside the OS now so help is GREATLY appreciated)
you need to press in "phone info" long press until you see adb enable bro
I have been blundering my way though the internet to get my ROG Phone 2 rooted. I have unlocked the bootloader, I have a modified boot image from magisk, I have the ADB connection set up through USB and it works fantastically. I honestly don't know how I got it work, it involved many different driver update attempts and then figuring out I hadn't put the phone into USB debugging, but now fastboot doesn't work.
ADB will list the device, but fastboot cannot see it. I have tried rebooting the phone into the bootloader, but there is no connection on either. Not sure why I thought that would work, but I tried. I really don't understand enough about fastboot to get any farther on my own.
I have the tencent version and I was pretty certain I have the CN android 9.0 on it, but I am no longer certain of that. I am running windows 10.
This is my build number: PKQ1.190414.001.WW_Phone-16.0622.1906.19-0
I honestly don't know, but does that WW mean my tencent phone is running the WW firmware?
RichDoe252 said:
I have been blundering my way though the internet to get my ROG Phone 2 rooted. I have unlocked the bootloader, I have a modified boot image from magisk, I have the ADB connection set up through USB and it works fantastically. I honestly don't know how I got it work, it involved many different driver update attempts and then figuring out I hadn't put the phone into USB debugging, but now fastboot doesn't work.
ADB will list the device, but fastboot cannot see it. I have tried rebooting the phone into the bootloader, but there is no connection on either. Not sure why I thought that would work, but I tried. I really don't understand enough about fastboot to get any farther on my own.
I have the tencent version and I was pretty certain I have the CN android 9.0 on it, but I am no longer certain of that. I am running windows 10.
This is my build number: PKQ1.190414.001.WW_Phone-16.0622.1906.19-0
I honestly don't know, but does that WW mean my tencent phone is running the WW firmware?
Click to expand...
Click to collapse
Fun fact, I just got Fastboot access from my computer by using the side USB port and rebooting into the bootloader from ADB. Still not to sure about the version bit. I think I'm just going to give it whirl and brick my device, maybe.
RichDoe252 said:
I have been blundering my way though the internet to get my ROG Phone 2 rooted. I have unlocked the bootloader, I have a modified boot image from magisk, I have the ADB connection set up through USB and it works fantastically. I honestly don't know how I got it work, it involved many different driver update attempts and then figuring out I hadn't put the phone into USB debugging, but now fastboot doesn't work.
ADB will list the device, but fastboot cannot see it. I have tried rebooting the phone into the bootloader, but there is no connection on either. Not sure why I thought that would work, but I tried. I really don't understand enough about fastboot to get any farther on my own.
I have the tencent version and I was pretty certain I have the CN android 9.0 on it, but I am no longer certain of that. I am running windows 10.
This is my build number: PKQ1.190414.001.WW_Phone-16.0622.1906.19-0
I honestly don't know, but does that WW mean my tencent phone is running the WW firmware?
Click to expand...
Click to collapse
1. You are running a WW rom, but that doesn't necessarily mean your fingerprint is matched. To update you need to have both WW rom and WW fingerprint. You can check if your fingerprint is CN or WW using device info hw from playstore under 'system'
2. In order to root you need to have a matching root boot img for your current rom ie root img for 1906.19, just checking that your know this?
3. Have you managed to get the phone recognised using the cmd 'fastboot devices'? Also are you using the side port?
4.when you say bootloader, have you definitely got the phone in fastboot mode - hold vol up and power button until you see the screen with some options. That screen is fastboot mode, you don't need to select any further options. Once in that mode, connect to pc, open adb and run the fastboot devices cmd. Once your device is recognised, report back here for further steps
superbrick.
reg66 said:
1. You are running a WW rom, but that doesn't necessarily mean your fingerprint is matched. To update you need to have both WW rom and WW fingerprint. You can check if your fingerprint is CN or WW using device info hw from playstore under 'system'
2. In order to root you need to have a matching root boot img for your current rom ie root img for 1906.19, just checking that your know this?
3. Have you managed to get the phone recognised using the cmd 'fastboot devices'? Also are you using the side port?
4.when you say bootloader, have you definitely got the phone in fastboot mode - hold vol up and power button until you see the screen with some options. That screen is fastboot mode, you don't need to select any further options. Once in that mode, connect to pc, open adb and run the fastboot devices cmd. Once your device is recognised, report back here for further steps
Click to expand...
Click to collapse
Thanks for the reply! I did indeed get fastboot to work over USB. Fastboot devices reported back the serial number and everything. I did not know that the build need to match on both the boot and the rom, but that does make sense and I probably should have realized that before I went ahead and copied the rooted boot.img I had over. Then my phone couldn't boot up proper, and got stuck in fastboot. Then I went ahead and copied all of the contents of the same rom over and now it is literally just a black screen. Won't turn on any more. I think I super bricked it.
Sorry I didn't see your post earlier and I know I am not father into the deep end, but is there a way out from where I am.
RichDoe252 said:
Thanks for the reply! I did indeed get fastboot to work over USB. Fastboot devices reported back the serial number and everything. I did not know that the build need to match on both the boot and the rom, but that does make sense and I probably should have realized that before I went ahead and copied the rooted boot.img I had over. Then my phone couldn't boot up proper, and got stuck in fastboot. Then I went ahead and copied all of the contents of the same rom over and now it is literally just a black screen. Won't turn on any more. I think I super bricked it.
Sorry I didn't see your post earlier and I know I am not father into the deep end, but is there a way out from where I am.
Click to expand...
Click to collapse
Oh jeepers dude. So just a black screen... Can you at least boot into fastboot?
reg66 said:
Oh jeepers dude. So just a black screen... Can you at least boot into fastboot?
Click to expand...
Click to collapse
Nope. The only response I can get out of it now is when I plug it into the fastboot port, the computer recognizes that something was plugged in. I don't even get a device on a device manager.
RichDoe252 said:
Nope. The only response I can get out of it now is when I plug it into the fastboot port, the computer recognizes that something was plugged in. I don't even get a device on a device manager.
Click to expand...
Click to collapse
Try holding the power button for around 20 secs until it shuts down. Then try vol up and power together and see if you get back to fastboot. If that doesn't work try vol up vol down and power buttons all together. Then try again to put it in fastboot mode using vol up and power. Let us know what happens /if you can reach fastboot mode
reg66 said:
Try holding the power button for around 20 secs until it shuts down. Then try vol up and power together and see if you get back to fastboot. If that doesn't work try vol up vol down and power buttons all together. Then try again to put it in fastboot mode using vol up and power. Let us know what happens /if you can reach fastboot mode
Click to expand...
Click to collapse
Unfortunately, nothing. Holding power for 20 seconds showed nothing, and like wise for volume up and power. Battery was fully charged too. Had it plugged in for most of today while I was trying to get fastboot to work.
RichDoe252 said:
Unfortunately, nothing. Holding power for 20 seconds showed nothing, and like wise for volume up and power. Battery was fully charged too. Had it plugged in for most of today while I was trying to get fastboot to work.
Click to expand...
Click to collapse
Is there any sort of illumination to the black screen ie do you think the phone is on but the screen is black or do think the phone is completely off?
Holding power button for a while should switch it off after a while. Try holding for longer than 20 secs, then try booting into fastboot mode
---------- Post added at 04:00 AM ---------- Previous post was at 03:44 AM ----------
Well dude, it's 4 am here. Gotta get some sleep dude. Will check here when I wake. Good luck in the mean time
Still trying to get to sleep. How ya getting on? What about vol down and power buttons for 30+secs, can you try that and let us know the results
reg66 said:
Still trying to get to sleep. How ya getting on? What about vol down and power buttons for 30+secs, can you try that and let us know the results
Click to expand...
Click to collapse
Bro get to sleep! Such a good Samaritan
TikiThePug said:
Bro get to sleep! Such a good Samaritan
Click to expand...
Click to collapse
LOL! I would if I could, just can't sleep yet. Hopefully soon tho!
RichDoe252 said:
Unfortunately, nothing. Holding power for 20 seconds showed nothing, and like wise for volume up and power. Battery was fully charged too. Had it plugged in for most of today while I was trying to get fastboot to work.
Click to expand...
Click to collapse
Try a USB 2.0 port? Surprisingly this works for some phones even though it's compatible with 3.0.
reg66 said:
Still trying to get to sleep. How ya getting on? What about vol down and power buttons for 30+secs, can you try that and let us know the results
Click to expand...
Click to collapse
Well, It's been untouched for a day now, and it still will not react to input. No response from long hold on the power button. I will try again in the morning. Is it possible that I somehow wrote into the BIOS of the phone? Android does use a BIOS, right?
RichDoe252 said:
Well, It's been untouched for a day now, and it still will not react to input. No response from long hold on the power button. I will try again in the morning. Is it possible that I somehow wrote into the BIOS of the phone? Android does use a BIOS, right?
Click to expand...
Click to collapse
Android itself does not have a BIOS, since Android is an OS and BIOS is more similar to firmware. But yes, the phone does have firmware, and it could be that the mismatch in firmware versions (from which you tried to flash), has caused the bootloader to "not know what to do now" when trying to start the phone up.
One thing which comes with all phones with a Qualcomm chipset is something called Qualcomm Crashdump Mode. You can try to see if you can get your phone in EDL (emergency download) mode and restore the correct firmware in that way:
https://www.the***********.com/rog-phone-2-unbrick-guide (URL gets censored for some reason; it should be "the custom droid" with no spaces)
Also, if you continue to have driver issues with connecting the phone to your PC, are you able to test another PC or even a Mac if you have access to one? I find Windows can be a giant pain for getting ADB and fastboot to work properly at times.
Good luck and let us know how it goes.
reg66 said:
Still trying to get to sleep. How ya getting on? What about vol down and power buttons for 30+secs, can you try that and let us know the results
Click to expand...
Click to collapse
Ok, so here's where I am: I have left the phone unplugged for a long time now. Really had no effect. I just downloaded QPST and I can actually get my computer to see the phone. However, I am still not quite sure how to USE QPST and not make things worse. So this is my plan: I am going to look through the forums here for info on how to use QPST to get my phone working again. Not really sure what that will look like, but fastboot would be a good start. From there, it sounds like I have to get the original firmware back on it, and then go about the process of rooting once again.
Still leaves me with the issue that started me down the path of rooting this phone, but at least it will not longer be bricked.
RichDoe252 said:
Ok, so here's where I am: I have left the phone unplugged for a long time now. Really had no effect. I just downloaded QPST and I can actually get my computer to see the phone. However, I am still not quite sure how to USE QPST and not make things worse. So this is my plan: I am going to look through the forums here for info on how to use QPST to get my phone working again. Not really sure what that will look like, but fastboot would be a good start. From there, it sounds like I have to get the original firmware back on it, and then go about the process of rooting once again.
Still leaves me with the issue that started me down the path of rooting this phone, but at least it will not longer be bricked.
Click to expand...
Click to collapse
You may not HAVE to flash complete firmware, it is quite likely that the boot.img is causing the problem as you flashed an incompatible version. Below you'll flash the correct version which HOPEFULLY will fix your phone, provided you can get into fastboot mode now.
Haven't read back through all the thread so i can't recall all the details of where you're at. As far as i can tell you're still running WW 16.0622.1906.19-0, correct? Can you get the device to now boot into fastboot mode? (from a powered off state, press and hold vol up and power at the same time. You should then be presented with some options, DON'T select any option. With that menu screen open is fastboot mode.
1. Download and install ADB Fastboot from here to C: drive of your pc/laptop.
2. With your phone in fastboot mode (as detailed above) connect it to pc/laptop using the side port of the phone.
3. Navigate to C:\Program Files (x86)\Minimal ADB and Fastboot folder and double click the cmd-here.exe, this will open a cmd window.
4. Type 'fastboot devices' to check that it's recognised, there should be a serial/key shown after entering that cmd.
5. Provided the serial/key is shown in fastboot mode, download the following boot.img (which is for WW 1906.19) from here.
6. Copy that boot img to the same folder you have open for ADB (C:\Program Files (x86)\Minimal ADB and Fastboot)
7. In the cmd window type 'fastboot flash boot boot.img'.
Now, that boot img is the STOCK boot img for your rom version. Don't worry about rooting for now (if i recall correctly, your phone won't boot to system), let's just try to get the phone booting first. Providing there are no errors when flashing the boot img, on the phone fastboot menu, scroll through and choose 'restart'.
Let me know if the device boots to system now... Good luck
I'll pm you my email address so you'll be able to get hold of me if you get stuck at any stage...
EDIT: was forgetting you tried so many times to get into fastboot mode, without success.
---------- Post added at 08:59 PM ---------- Previous post was at 08:17 PM ----------
Dude, is your phone screen still black but switched on? When you tap the screen does it vibrate. I'm thinking you might already be in edl mode (which could be a good thing). Let us know
Check your pm's dude for further info. I can't post links to the site required so have sent via pm
TikiThePug said:
Android itself does not have a BIOS, since Android is an OS and BIOS is more similar to firmware. But yes, the phone does have firmware, and it could be that the mismatch in firmware versions (from which you tried to flash), has caused the bootloader to "not know what to do now" when trying to start the phone up.
One thing which comes with all phones with a Qualcomm chipset is something called Qualcomm Crashdump Mode. You can try to see if you can get your phone in EDL (emergency download) mode and restore the correct firmware in that way:
https://www.the***********.com/rog-phone-2-unbrick-guide (URL gets censored for some reason; it should be "the custom droid" with no spaces)
Also, if you continue to have driver issues with connecting the phone to your PC, are you able to test another PC or even a Mac if you have access to one? I find Windows can be a giant pain for getting ADB and fastboot to work properly at times.
Good luck and let us know how it goes.
Click to expand...
Click to collapse
Just dropping you a quick note to say thanks for thanks! LOL. Yeah, your post earlier seems like the best place to go. Have used Miflash Tool a few times on Xiaomi devices, it's pretty good and straight forward. Should be a LOT easier than using QPST and having to change EMMC to UFS.
Can't remember where i saw it now, but i'm sure i read that if the phone screen is black (but switched on) and vibrates, then it's likely to be in EDL mode already. Which will hopefully be good news for @RichDoe252. Before that (having never been in that situation), i wasn't aware that an all black screen could mean EDL mode is active. Fingers crossed for Rich it'll all work out just fine.
@RichDoe252 If all goes successfully using the QPST file download (and using the Miflash Tool the guide mentions in the pm i sent you) and flashing, DON'T ROOT JUST YET!!!! LOL. Let us know how it goes and then we can look into, and point you in the right direction, for getting you rooted and up to date on latest A9 or A10 whichever you'd prefer
Well I must say Rich, I'm surprised you haven't been back here yet to give any updates on progress!! Sent you a couple of emails through pm... Man, if it was my fairly expensive phone that was in the poo pan, I'd be all over trying to fix it lol
reg66 said:
Well I must say Rich, I'm surprised you haven't been back here yet to give any updates on progress!! Sent you a couple of emails through pm... Man, if it was my fairly expensive phone that was in the poo pan, I'd be all over trying to fix it lol
Click to expand...
Click to collapse
First off, you are a freaking saint. I really do appreciate all the help you have been offering up, and I am sorry I have not been very quick with a response. As my phone currently stands, I get 0% response from anything I do to it. No vibrate, nothing. No indication it even is plugged in. I had it connected to my PC with QPST installed, and it was able to pick up that the phone was there, and then immediately tried to download something to it. Not sure what, not sure why, but that kinda typifiies my interaction with this whole process so far. If you haven't guessed, I'm kinda in over my head.
Back to the problem: QPST started some opperation to download something to it. Wouldn't let me do anything else, said the phone was in "download mode". Either way it stopped at 30% and didn't progress for 30 minutes, so I tried to unplug it and plug it back in. Same interaction. Unable to do anything to the phone, no reaction from the phone what so ever. This was, by the way, plugged into the fastboot side port.
I saw that you PM'ed me, and now I can't find the email notification or the PMs on the site. Forgive me for being unfortunately new at this. I will get back to you bud, and thank you again.
Hello everyone! So after the new mediatek DAA and SLA protection bypasses you can find github repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX2001, RMX2002 and RMX2003 ONLY. DON'T DO ANY OF THESE IF YOU HAVE SOMETHING ELSE!
PLEASE SEE "TROUBLESHOOTING" AT THE END OF THE GUIDE FIRST IF YOU HAVE PROBLEMS IN THE PROCESS BEFORE ASKING!
ALWAYS USE DOWNLOAD ONLY MODE OF SP FLASH TOOL.
DON'T TOUCH ANYTHING RELATED TO FORMAT ON SP FLASH TOOL! (IT'S WRITTEN EVERYWHERE, YOU WILL LOSE YOUR IMEIS IF YOU USE FORMAT ALL + DOWNLOAD. YOU ARE SAFE IF YOU USE DOWNLOAD ONLY.)
VIDEO GUIDES
FOR LINUX METHOD CLICK HERE - Credits to @bx2_nero
Windows Method
Requirements:
Bypass Tools Pack - (SPFLASH TOOL, DRIVER AND BYPASS FILES)
Decrypted OFP (OPPO FIRMWARE PACKAGE) Files:
FULL FIRMWARE - INCLUDES THE "USERDATA" PARTITION, HENCE LARGER.
B.53 - Mega - Google Drive - Mirror3
B.37 - Mega - Google Drive 2
B.23 (First RUI Update for the device) - Mega - Google Drive - Mirror3
A.50[EU] - Mega - Google Drive
A.42[EU] - Google Drive - Mirror2
NOU (NO USERDATA) FIRMWARE - FOR PEOPLE WITH LIMITED DATA PLAN.
B.53 - Google Drive - Mirror 2
B.37 - Google Drive - Mirror 2
B.23 - Google Drive - Mirror 2
A.50[EU] - Mega - Google Drive
A.42[EU] - Google Drive - Mirror2
Please read an explanation of what is userdata partition and how different is this from other firmware here.
Note: All files with available links above are tested.
Python (Must add to PATH during installation, see screenshot if you don't understand)
libusb-win32 - Having Issues? Use this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Make sure to choose the last option.
1)Open command prompt by running cmd,
enter
python -m pip install pyusb pyserial json5
After the installation, you can re-run the command. If it looks like the screenshot above you're ready to go to next step.
after the installation leave CMD.
2) Go to driver folder, find the .inf file right click and press install.
3)Download this file and install it, after installing plug your phone to PC by connecting your phone to PC while doing Vol+- . You might need this driver as well if it's not detected.
Press next, connect your device to PC while holding Vol+- buttons (your device needs to be powered off) and you will see the mtkdriver down below. Install it.
Choose MediaTek USB Port and install it.
4)Turn off your phone and again connect to PC while holding Vol+- buttons then run the brom.bat under Bypass folder. If it says "Protection Disabled" in the end you're ready to go on. (If it's like the screenshot below go on.)
If you had a problem here, please check the end of the guide for it's fix.
5)Go into Flash Tool folder and open the SPFlash tool, after that choose scatter file and also if not set, set your download -agent. You don't need to select auth file as authorization is disabled. Once you do it, it should look like this. ALWAYS MAKE SURE DOWNLOAD ONLY MODE IS SELECTED! DON'T SELECT OTHER MODES!
Click choose DA Agent. (I uploaded an updated bypass tools pack, if you're using older download new one) Go into Bypass Tools Pack > Verified Boot Fix > Choose the "DA_6765_6785_6768_6873_6885_6853.bin" file.
If its giving error go into Options menu and disable option shown below. You will be able to choose a DA file.
Make SURE "Download Only" is selected. Don't select ANYTHING ELSE! You will lose your IMEIs, Serial Numbers, Capability of Hardware Attestation etc. if you choose "Format data + Download" make SURE you selected "Download Only".
After flashing it should look like this. Download has been complete. Enjoy!
Now, you can start downloading with the button and after that a checkmark will appear. You can reboot your phone and use it like before now! All your userdata will (inevitably) be cleared!
Spoiler: TROUBLESHOOTING - FAQ AND FIXES
POSSIBLE ERROR: "Verified boot enabled."
There are 2 fixes to this.
1st Method (DIRECT FIX):
Click choose DA Agent. (I uploaded an updated bypass tools pack, if you're using older download new one) Go into Bypass Tools Pack > Verified Boot Fix > Choose the "DA_6765_6785_6768_6873_6885_6853.bin" file.
If its giving error go into Options menu and disable option shown below. You will be able to choose a DA file.
2nd Method (WORKAROUND):
If you're getting this error, and you are SURE you used "Download Only" mode, there's a way to get rid of this. First, load the scatter then untick/deselect partitions listed below.
opporeserve2,
cdt_engineering,
my_custom,
special_preload,
userdata,
super,
After running brom.bat and flashing all partitions except the ones listed above, your phone will be able to reboot to stock recovery. Now select " Power Off" option then go run brom.bat, bypass authorization and then flash partitions listed below from SPFlash Tool.
super,
dtbo,
userdata
Your device will be able to boot into system after this if you have followed steps correctly.
POSSIBLE ERROR: Issues while disabling protection;
Power off your device Restart the process from 2nd step.
POSSIBLE ERROR: Issues while flashing;
Power off your device, you will need to do the bypass again. Check your USB Cable, there might be a disconnection. If not, start from 3rd step and make sure you did everything right.
Spoiler: FOR PEOPLE WHO WANT TO DOWNGRADE AND FOR PEOPLE WHO WERE ON EU VERSION
So, welcome to hell(!).
For people who want to downgrade:
If you want to downgrade to any version you would like, just use the B23 file as it is the oldest ofp file i could find for extracting process. If you were on EU version before (Any version starting with A) download ozip from here(for EU) , here(for Global) and manually flash from Realme UI recovery and format your data. Your device will be back at A.XY firmware with EU features (No heytap, no ads, no theme store, no bloatware) you had before.
For people on EU who want to unbrick:
So, you can use any version starting with B and it should work. It works in my case, i was on A.48, i flashed B53 and over that flashed B23. No probs at all. If you want to return to EU rom (starting with A) download ozip from here and manually flash from Realme UI recovery and format your data. Your device will be back at A.XY firmware with EU features (No heytap, no ads, no theme store, no bloatware) you had before.
Thanks --
https://github.com/bkerler/oppo_decrypt for decryptor.
https://github.com/MTK-bypass for creating the tool.
Thank you for your efforts. Can you add the decrypted A34 file?
mercan01 said:
Thank you for your efforts. Can you add the decrypted A34 file?
Click to expand...
Click to collapse
Hello! I wasn't able to find factory package (ofp) files for any version that makes sense for versions starting with A. (EU). There are A11 and A08 which according to update trackers, did never exist and the A.11 package is %50 larger than all the other files weirdly. I have contacted owner of some sites that do upload files like these and they asked for money. If it's a resonable price i will get it, decrypt it and upload here! If you were able to find any versions starting with A, feel free to message me on telegram (@ctivity) or email me!
Hi, it gives an error when I do unbrick with a different version, when my phone was brick the version was A34.
mercan01 said:
Hi, I have a website that publishes A24 version only. https://www.getdroidtips.com/realme-6-software-update/. It gives an error when I do unbrick with a different version, when my phone was brick the version was A34.
Click to expand...
Click to collapse
Hello again. According to the site you have just sent, A.11 is the first update to EU version. I was thinking it was a mistakenly uploaded file, since userdata partitions are for some reason 9gb with this one instead of 3. If you Downgrade to A11 using SPFLASH tool and this guide and after that install any version included here using recovery, it will work. Unfortunately, these files you sent in the link are ozip files and update packages while ofp files are firmware packages and they include everything. There are only 2 ofps -decrypted and not decrypted- available for now starting with A(EU), A08 (first ever firmware for EU) and A11(first update to EU version).
Hello again. Yes, I noticed there was an ozip file and deleted it.
daeSundae said:
If you Downgrade to A11 using SPFLASH tool and this guide and after that install any version included here using recovery, it will work.
Click to expand...
Click to collapse
First of all, thank you daeSundae for posting this info here!
Have you actually tried to flash the decrypted A.11 version? I did according to your guide. Everything went fine including the green checkmark after successful flash.
Then I held the phone's power button until it vibrated once, like a normal boot up. However the phone remained black and seems nearly completely dead now. It doesn't react to any key combinations (including Vol+-) and Windows reports a malfunctioning unrecognizable device.
Linux shows a device that identifies as "18d1:d001 Google Inc. Nexus 4 (fastboot)".
Fastboot does not recognize the device, adb however does, showing the correct S/N and state unauthorized, thus it doesn't accept any commands.
So the USB controller seems to be still alive, but nothing more.
To be clear: I don't blame you in any way, I'm just trying to provide information to step forward! So, what was your experience on A.11?
cmfan said:
First of all, thank you daeSundae for posting this info here!
Have you actually tried to flash the decrypted A.11 version? I did according to your guide. Everything went fine including the green checkmark after successful flash.
Then I held the phone's power button until it vibrated once, like a normal boot up. However the phone remained black and seems nearly completely dead now. It doesn't react to any key combinations (including Vol+-) and Windows reports a malfunctioning unrecognizable device.
Linux shows a device that identifies as "18d1:d001 Google Inc. Nexus 4 (fastboot)".
Fastboot does not recognize the device, adb however does, showing the correct S/N and state unauthorized, thus it doesn't accept any commands.
So the USB controller seems to be still alive, but nothing more.
To be clear: I don't blame you in any way, I'm just trying to provide information to step forward! So, what was your experience on A.11?
Click to expand...
Click to collapse
Hello! I'm sorry for the inconvenience I have tried flashing A11 file and it caused several problems just like in your case, however if you didn't select "Format All+ Download" mode you should be able to recover your phone. So, I had the exact same issue today and due to that I will be removing the A11 file from the links. Also, never forget to select Download Mode only! Several people bricked today and their IMEIs, Serial Numbers are all gone! Never select anything else than Download Mode!
So the solution is to download B53 decrypted files, load the scatter and untick listed partitions
opporeserve
,cdt-engineering,
mycustom,
special-preload,
userdata,
super
and then start the flashing in download mode. Now, you might be wondering "How am I going to go into the download mode again?" It's very simple. All you have to do is to keep pressing on Power and Vol- for some time and then, connecting to the pc with both volume buttons pressed while brom.bat is running. If you get an error, just reinstall device filters and that should fix the problem, then you can start downloading. After downloading these partitions to the phone, you will be able to see a boot animation and as well as a realme logo. Reboot to recovery, power of your device and then go into download mode again and flash userdata, dtbo and super partitions this time around. It should boot into system. However, the version will be B.53 but you can use the latest ozip (A.48), flash it from recovery and then format your data. It will bring you back to EU version.
cmfan said:
First of all, thank you daeSundae for posting this info here!
Have you actually tried to flash the decrypted A.11 version? I did according to your guide. Everything went fine including the green checkmark after successful flash.
Then I held the phone's power button until it vibrated once, like a normal boot up. However the phone remained black and seems nearly completely dead now. It doesn't react to any key combinations (including Vol+-) and Windows reports a malfunctioning unrecognizable device.
Linux shows a device that identifies as "18d1:d001 Google Inc. Nexus 4 (fastboot)".
Fastboot does not recognize the device, adb however does, showing the correct S/N and state unauthorized, thus it doesn't accept any commands.
So the USB controller seems to be still alive, but nothing more.
To be clear: I don't blame you in any way, I'm just trying to provide information to step forward! So, what was your experience on A.11?
Click to expand...
Click to collapse
So, i just read your reply again.
"Then I held the phone's power button until it vibrated once, like a normal boot up. However the phone remained black and seems nearly completely dead now. It doesn't react to any key combinations (including Vol+-) and Windows reports a malfunctioning unrecognizable device."
i dont think it's an issue caused by the device. Can you install oppo drivers from this link and let me know what happens afterwards? Or if you're fast enough you might prefer going into device manager by right clicking on Windows button and uninstall it's driver? I will also request you to start from step 2 to ensure installing drivers. I had the same black screen but my Windows was able to detect the Download Mode when i connected while both volume buttons pressed.
mercan01 said:
Hi, it gives an error when I do unbrick with a different version, when my phone was brick the version was A34.
Click to expand...
Click to collapse
Hello! I have uploaded B23 files both on google drive and mega. It should work for you, it is working for me at the moment. I also was on A48 firmware and both B23 and B53 versions worked without a problem.
daeSundae said:
I had the same black screen but my Windows was able to detect the Download Mode when i connected while both volume buttons pressed.
Click to expand...
Click to collapse
Well, good to hear, that your phone survived the faulty firmware. Although I select Download only of course I can't reach download mode any more. It is completely dead, Holding whatever combinations for even a minute doesn't have any effect. Normally you can force a reboot by holding Power and Vol+ for 10-15 seconds. If you keep holding it'll reboot, if you release both keys immediately after the screen went black it stays powered off. That's how I could escape the previous bootloop.
I've tried removing all devices and drivers and reinstalling them as per your guide, alas to no avail. My second, still intact phone (stock, unrooted), identifies in download mode as "USB serial device" on Windows and as "Mediatek Inc. MT6227 Phone" on Linux. The bricked always identifies as "Google Inc. Nexus 4 (fastboot)" throughout (buttons pressed or not).
It's a shame I didn't have the idea of unbricking with a B region firmware and flashing the A region later through recovery, because then I wouldn't have tried the untested A.11, but taken the verified route instead.
cmfan said:
Well, good to hear, that your phone survived the faulty firmware. Although I select Download only of course I can't reach download mode any more. It is completely dead, Holding whatever combinations for even a minute doesn't have any effect. Normally you can force a reboot by holding Power and Vol+ for 10-15 seconds. If you keep holding it'll reboot, if you release both keys immediately after the screen went black it stays powered off. That's how I could escape the previous bootloop.
I've tried removing all devices and drivers and reinstalling them as per your guide, alas to no avail. My second, still intact phone (stock, unrooted), identifies in download mode as "USB serial device" on Windows and as "Mediatek Inc. MT6227 Phone" on Linux. The bricked always identifies as "Google Inc. Nexus 4 (fastboot)" throughout (buttons pressed or not).
It's a shame I didn't have the idea of unbricking with a B region firmware and flashing the A region later through recovery, because then I wouldn't have tried the untested A.11, but taken the verified route instead.
Click to expand...
Click to collapse
Well, as far as my knowledge goes BROM is burnt onto SoC and cannot fall into an inaccessible state. You should still be able to do access download mode even if that firmware was corrupt. Do you know if your phone has any charge or not? Can you try different volume and key combinations? A broken firmware shouldn't make the BROM Download mode inaccessible.
cmfan said:
Well, good to hear, that your phone survived the faulty firmware. Although I select Download only of course I can't reach download mode any more. It is completely dead, Holding whatever combinations for even a minute doesn't have any effect. Normally you can force a reboot by holding Power and Vol+ for 10-15 seconds. If you keep holding it'll reboot, if you release both keys immediately after the screen went black it stays powered off. That's how I could escape the previous bootloop.
I've tried removing all devices and drivers and reinstalling them as per your guide, alas to no avail. My second, still intact phone (stock, unrooted), identifies in download mode as "USB serial device" on Windows and as "Mediatek Inc. MT6227 Phone" on Linux. The bricked always identifies as "Google Inc. Nexus 4 (fastboot)" throughout (buttons pressed or not).
It's a shame I didn't have the idea of unbricking with a B region firmware and flashing the A region later through recovery, because then I wouldn't have tried the untested A.11, but taken the verified route instead.
Click to expand...
Click to collapse
Oh wait. Is it identifying as fastboot? Then you should be able to (even if you don't have USB debugging authorization) use minimal ADB and fastboot tools to
use "fastboot reboot" command. Please keep pressing vol - button if you can while rebooting if it works. That should, if possible reboot you into recovery.
Also as you said, keeping pressing on power and vol+ buttons don't work in this state. In fact, in this state nothing visually works, there is no screen output and I'm actually pretty sure it's the same for begonia (RN8 PRO). You will need to ~ if it's detecting it as a fastboot device need to use minimal ADB and fastboot tools to get rid of that state. I didn't have the same issue as you though. While I was in same state, I kept on pressing on Vol - and Power buttons for around 30-40 seconds (obviously without a response from the device) and after that pressed both volume buttons and connected device to PC. Can you also try when your device powers off? Because clearly currently your device isn't powered off and cannot be powered off until the battery dies or you can somehow manage to escape from current situation.
MTK Bypass Universal
My screenshots were used in this post. I don't mind
MEGAFON929 said:
MTK Bypass Universal
My screenshots were used in this post. I don't mind
Click to expand...
Click to collapse
I'm sorry for not letting you know Dinolek. I tried to create a guide but my Windows is Single Language and since it's not global version or something I cannot change its language. I had to find an English screenshot. If it's a problem, I'll just remove them.
No, I'm not Dinolek. I just talked to him and he accepted my instructions. Let the screenshots lie, I don't mind.
Thank you daeSundae for helping me, I really appreciate that. So, what do we have:
Well, as far as my knowledge goes BROM is burnt onto SoC and cannot fall into an inaccessible state. You should still be able to do access download mode even if that firmware was corrupt.
Click to expand...
Click to collapse
Sounds reasonable and I hope it's true.
daeSundae said:
Do you know if your phone has any charge or not? Can you try different volume and key combinations?
Click to expand...
Click to collapse
The phone was fully charged when it bricked, so yes, the battery will last several days I fear, esp. without driving the display.
Three buttons make 7 possible combinations. I've tried them all, pressing, holding and holding while connecting USB. No reaction at all, unfortunately.
daeSundae said:
Oh wait. Is it identifying as fastboot? Then you should be able to (even if you don't have USB debugging authorization) use minimal ADB and fastboot tools to use "fastboot reboot" command.
Click to expand...
Click to collapse
This is kind of weird. The phone identifies as USB ID 18d1:d001 on Linux which is said fastboot device. fastboot does not see it, only adb does. But maybe it justs sees the device, lists it, but cannot communicate otherwise with it. I guess if the device was just silent (or dead) adb would assume unauthorized, in lack of any other behavior.
Window btw does not accept the device at all and lists an "Unknown USB Device (Invalid Configuration Descriptor)".
daeSundae said:
Can you also try when your device powers off? Because clearly currently your device isn't powered off and cannot be powered off until the battery dies or you can somehow manage to escape from current situation.
Click to expand...
Click to collapse
Sound also reasonable, however waiting for the battery to drain may last a very long time. I am out of ideas on how to force a power off otherwise (apart from sacrificing hardware integrity and disconnecting the battery of course)
Man, do I miss the old days when a ZergRush was all you needed to root and problems like this were solved by pulling the removable battery...
cmfan said:
Thank you daeSundae for helping me, I really appreciate that. So, what do we have:
Sounds reasonable and I hope it's true.
The phone was fully charged when it bricked, so yes, the battery will last several days I fear, esp. without driving the display.
Three buttons make 7 possible combinations. I've tried them all, pressing, holding and holding while connecting USB. No reaction at all, unfortunately.
This is kind of weird. The phone identifies as USB ID 18d1:d001 on Linux which is said fastboot device. fastboot does not see it, only adb does. But maybe it justs sees the device, lists it, but cannot communicate otherwise with it. I guess if the device was just silent (or dead) adb would assume unauthorized, in lack of any other behavior.
Window btw does not accept the device at all and lists an "Unknown USB Device (Invalid Configuration Descriptor)".
Sound also reasonable, however waiting for the battery to drain may last a very long time. I am out of ideas on how to force a power off otherwise (apart from sacrificing hardware integrity and disconnecting the battery of course)
Man, do I miss the old days when a ZergRush was all you needed to root and problems like this were solved by pulling the removable battery...
Click to expand...
Click to collapse
Can you try ADB reboot command on Linux? As it is identifying as a fastboot device?
cmfan said:
The phone was fully charged when it bricked, so yes, the battery will last several days I fear, esp. without driving the display.
This is kind of weird. The phone identifies as USB ID 18d1:d001 on Linux which is said fastboot device. fastboot does not see it, only adb does. But maybe it justs sees the device, lists it, but cannot communicate otherwise with it. I guess if the device was just silent (or dead) adb would assume unauthorized, in lack of any other behavior.
Window btw does not accept the device at all and lists an "Unknown USB Device (Invalid Configuration Descriptor)".
Click to expand...
Click to collapse
If it's detecting a fastboot device, the device isn't dead. What I'm guessing is that your device is working, and on fastboot mode but since there's no display output in this state it will only show a black screen. Can you do ADB devices command? Im guessing adb reboot requires authorization though, but it's worth trying. What I will be requesting from you is to try pressing (and keep pressing on) different key combinations while device is in that state for like a minute or so, for example keep pressing on Vol- and power for a minute then switch to Power and Vol+ for a minute and then keep pressing on both volume buttons and connect device. Can you also see the results after plugging your device into charge and letting it stay for around a minute? I know these might make no sense technically, but in my opinion randomness is your best friend to get rid of situations like this..
cmfan said:
Thank you daeSundae for helping me, I really appreciate that. So, what do we have:
Sounds reasonable and I hope it's true.
The phone was fully charged when it bricked, so yes, the battery will last several days I fear, esp. without driving the display.
Three buttons make 7 possible combinations. I've tried them all, pressing, holding and holding while connecting USB. No reaction at all, unfortunately.
This is kind of weird. The phone identifies as USB ID 18d1:d001 on Linux which is said fastboot device. fastboot does not see it, only adb does. But maybe it justs sees the device, lists it, but cannot communicate otherwise with it. I guess if the device was just silent (or dead) adb would assume unauthorized, in lack of any other behavior.
Window btw does not accept the device at all and lists an "Unknown USB Device (Invalid Configuration Descriptor)".
Sound also reasonable, however waiting for the battery to drain may last a very long time. I am out of ideas on how to force a power off otherwise (apart from sacrificing hardware integrity and disconnecting the battery of course)
Man, do I miss the old days when a ZergRush was all you needed to root and problems like this were solved by pulling the removable battery...
Click to expand...
Click to collapse
Hello. again. So, i have asked few people about your situation. Conclusion is, if none of these work you will need to wait until battery wears off and device turns itself off, i'm afraid. I will ask you to not use your phone for like a day and not to keep it connected to a computer for a long time. After making sure it powered off (which, i'm guessing there is actually no way to do that) make sure to prepare the brom.bat file plug in your device with VOL+ - combo and go on. Before doing this make sure to Device Manager > Action > Add Legacy Hardware > Next > Install the hardware that I manually select from a list (Advanced) > Show All Devices > Have Disk > Choose the cdc-acm.inf > Choose Mediatek USB Port and install it to not waste time. I hope your problems will be fixed. I have confirmed that BROM mode shouldn't fall into an inaccessible state because there's no efuse.ini blown. It must be there, but you're probably stuck in a mode that doesn't allow doing anything for some reason.
Welp, first day of owning the OnePlus Ace and I've already bricked it lmao. Need some help in trying to unbrick it.
So last night I successfully rooted my device using magisk, but after experimenting I just decided to revert back to being unrooted, since I realised I didn't actually need many of the functions root allows. Derooted using Magisk, checked that it was unrooted, then went into fastboot mode to re-lock the bootloader. Did so, restarted and I was presented with the dreaded "The current image (boot/recovery) have been destroyed" error screen and endless bootlooping. I cannot access fastboot mode or recovery mode with button combinations, tried holding Vol + and power, Vol - and power but no dice. I believe I ended up bricking because I forgot to flash the stock vbmeta.img before locking the bootloader.
I've made some progress in getting to the MediaTek Emergency Download Mode (which I believe is also either called BROM or Preloader) in order to flash a stock rom. I found out that holding down both Vol + and Vol - at boot will enable this emergency download mode for a few seconds, before going to the destroyed boot/recovery error screen. The issue is, while I've managed to get the phone detected by my computer in this state in COM5 as a 'MediaTek PreLoader USB VCOM_V1632 (Android), none of the programs said to flash a stock rom will detect it. I've tried mtk_client, mtk bypass tool, SP Flash, even regular fastboot and adb tools, but none of them will detect the device, even though Windows does.
The only smart thing I did was refraining from transferring all of my files from my old phone to this one, so luckily I've got a phone to fall back on. Basically, until I find a fix, the Ace will have to stay in it's box makes me wish I never messed with root in the first place lmao. And because I imported the phone there's no warranty and no service centres for OnePlus in my country that can help.
Anyone have any ideas for how I can get the phone detected in these applications? Is it an issue of the SoC not being supported yet by these programs because it's relatively new? Are there any alternate ways to get to the fastboot menu? Any help would be greatly appreciated!
Thanks!
Update: If someone would be able to extract a scatter file from their own OnePlus Ace too, I think that may help me
Sorry that you've ran into this, but thanks for confirming bootloader can be unlocked, and root is possible.
Getting the 10R over the Realme GT 2 (sad situation of bootloader unlock not possible). Hope you get an extract soon
Made some progress!
Got my hands on the Ace's firmware files, which included the scatter file. Redownloaded the newest 6.2 version of SP Flash Tool and loaded the scatter and auth files successfully. Clicked download, connected USB to phone while holding Vol + and Vol - and finally! Sp Flash Tool connected to the phone! However, now I've run into another problem: SP Flash Tool will show a red progress bar at the bottom saying 'Download DA', it will reach 100% quickly then throw me a very vague error simply saying 'error_msg'. And that's it. Tried unchecking different boxes, reinstalled drivers but it will always throw back this error.
Any ideas to figure out what the error is and fix it would be amazing
hello, im here to show support. My ace also bricked because i want to change from color os to oxygen. I used fastboot enhanced, might have missed a step and bricked. Mine also import, but the shop i bought offers 1 year warranty. Shop says have to wait for msm download tools to reflash or i have to pay $60 to send back to China because my own fault. Man, it is going to be a long wait for msm tools. haha
KeepingKeyes said:
saying 'error_msg'.
Click to expand...
Click to collapse
try the mtk client and command - python mtk payload,and try sp flashtool again.please also share the files for firmware
DimRim said:
try the mtk client and command - python mtk payload,and try sp flashtool again.please also share the files for firmware
Click to expand...
Click to collapse
Tried this method, but didn't work. Kept giving me a "Handshake failed: retrying" error when connecting the phone to the computer.
Here's a link the the firmware: OnePlus Ace Firmware
KeepingKeyes said:
Tried this method, but didn't work. Kept giving me a "Handshake failed: retrying" error when connecting the phone to the computer.
Here's a link the the firmware: OnePlus Ace Firmware
Click to expand...
Click to collapse
maybe this is because of the new chip and there is no support for bypassing it.I thought the method would work.also a tip-edit the scatter file, namely partition_name: super or system,changing the value is_download: false to is_download: true.hopefully help
And thank you for sharing the files
I too am stuck with Brick.
Is there a Bypass for the Demesity 8100 being developed?
This device is mostly Oppo, but there is no Oppo flash Tool?
There is very little information available.
KeepingKeyes said:
Welp, first day of owning the OnePlus Ace and I've already bricked it lmao. Need some help in trying to unbrick it.
So last night I successfully rooted my device using magisk, but after experimenting I just decided to revert back to being unrooted, since I realised I didn't actually need many of the functions root allows. Derooted using Magisk, checked that it was unrooted, then went into fastboot mode to re-lock the bootloader. Did so, restarted and I was presented with the dreaded "The current image (boot/recovery) have been destroyed" error screen and endless bootlooping. I cannot access fastboot mode or recovery mode with button combinations, tried holding Vol + and power, Vol - and power but no dice. I believe I ended up bricking because I forgot to flash the stock vbmeta.img before locking the bootloader.
I've made some progress in getting to the MediaTek Emergency Download Mode (which I believe is also either called BROM or Preloader) in order to flash a stock rom. I found out that holding down both Vol + and Vol - at boot will enable this emergency download mode for a few seconds, before going to the destroyed boot/recovery error screen. The issue is, while I've managed to get the phone detected by my computer in this state in COM5 as a 'MediaTek PreLoader USB VCOM_V1632 (Android), none of the programs said to flash a stock rom will detect it. I've tried mtk_client, mtk bypass tool, SP Flash, even regular fastboot and adb tools, but none of them will detect the device, even though Windows does.
The only smart thing I did was refraining from transferring all of my files from my old phone to this one, so luckily I've got a phone to fall back on. Basically, until I find a fix, the Ace will have to stay in it's box makes me wish I never messed with root in the first place lmao. And because I imported the phone there's no warranty and no service centres for OnePlus in my country that can help.
Anyone have any ideas for how I can get the phone detected in these applications? Is it an issue of the SoC not being supported yet by these programs because it's relatively new? Are there any alternate ways to get to the fastboot menu? Any help would be greatly appreciated!
Thanks!
Click to expand...
Click to collapse
Still stuck or were you able to find any solution?
yashaswee1708 said:
Still stuck or were you able to find any solution?
Click to expand...
Click to collapse
Unfortunately not yet, the most promising option will be to wait for an MTK Auth Bypass utility to be developed for the Dimensity 8100 chipset. There might be active development on this front, so hopefully it will come soon.
The other option would be to find someone to do a remote flash, someone who has official Oppo/OnePlus flashing software and an account to use it. I believe I've found the official firmware to flash the phone in this state, however you need credentials to log in to it and access it. I think it will also specifically have to be Chinese credentials, as India login details may not allow you to flash a OnePlus Ace model. I tried to get someone over at (<Moderator Edit>: unallowed site name removed) to do a remote flash, and he couldn't because he had India credentials, but not Chinese credentials
KeepingKeyes said:
Unfortunately not yet, the most promising option will be to wait for an MTK Auth Bypass utility to be developed for the Dimensity 8100 chipset. There might be active development on this front, so hopefully it will come soon.
The other option would be to find someone to do a remote flash, someone who has official Oppo/OnePlus flashing software and an account to use it. I believe I've found the official firmware to flash the phone in this state, however you need credentials to log in to it and access it. I think it will also specifically have to be Chinese credentials, as India login details may not allow you to flash a OnePlus Ace model. I tried to get someone over at (<Moderator Edit>: unallowed site name removed) to do a remote flash, and he couldn't because he had India credentials, but not Chinese credentials
Click to expand...
Click to collapse
Oh. I had OnePlus 7 previously, there were few ways to flash stock firmware. The common one was MSM Tool, other one was Fastboot enhance.
But few times I flashed stock firmware manually like payload dump payload.bin and flash partitions manually from fastboot. Maybe this could work.
yashaswee1708 said:
Oh. I had OnePlus 7 previously, there were few ways to flash stock firmware. The common one was MSM Tool, other one was Fastboot enhance.
But few times I flashed stock firmware manually like payload dump payload.bin and flash partitions manually from fastboot. Maybe this could work.
Click to expand...
Click to collapse
I seem to have made fastboot inaccessible on my device, so I've been unable to use Fastboot enhance or utilise any ways to flash using fastboot
Damn!! I hope you find some way to fix your device. Good luck.
关于一加ACE如何优雅的刷入氧OS12.1这件事 来自 天伞桜 - 酷安
I create instruction, if you phone boot to fastboot mode
OnePlus 10R/Ace - Официальные прошивки - 4PDA
OnePlus 10R/Ace - Официальные прошивки
4pda.to
i`ts in russian, but you can use translate
GTAstar said:
I create instruction, if you phone boot to fastboot mode
OnePlus 10R/Ace - Официальные прошивки - 4PDA
OnePlus 10R/Ace - Официальные прошивки
4pda.to
i`ts in russian, but you can use translate
Click to expand...
Click to collapse
Hello. after unlocking the bootloader I have the message "Orange State. OS Not Being Verified Or Custom OS. Dismiss After 5 Seconds." but the system booted up. After uploading boot.img, the phone got stuck in bootloop. Unfortunately, the guide above did not help.
hamsteer said:
Hello. after unlocking the bootloader I have the message "Orange State. OS Not Being Verified Or Custom OS. Dismiss After 5 Seconds." but the system booted up. After uploading boot.img, the phone got stuck in bootloop. Unfortunately, the guide above did not help.
Click to expand...
Click to collapse
Are you still able to boot to Fastboot?
yashaswee1708 said:
Are you still able to boot to Fastboot?
Click to expand...
Click to collapse
Yes. I can flash files in cmd and FastbootEnhance but in practice it looks like they were not saved.
hamsteer said:
Yes. I can flash files in cmd and FastbootEnhance but in practice it looks like they were not saved.
Click to expand...
Click to collapse
So you are not able to boot right?
If not, you can try flashing the partitions manually from fastboot. (If you are willing to try I can provide the steps. This works for other OnePlus devices.)