Related
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
THIS RECOVERY WILL TRIP YOUR KNOX COUNTER ..AND UR WARRANTY WILL BE VOID
THIS RECOVERY IS ONLY FOR THE 3G dual sim VARIANT (SM-N7502) RUNNING JELLYBEAN (4.3)
Philz recoveryorignal thread here
Why CWM ? Why not a pre-rooted firmware which will not void warranty?
Ans : CWM has many more functionality than stock recovery ! Rooting means to playing around with your device.If some thing goes wrong it you have to flash the whole firmware again instead,backup your ROM through CWM and if something goes wrong restore your backup AS SIMPLE AS THAT !
All you have to do is follow my instructions :
STEP 1 :
-Download and setup ADB drivers for your device
can be found here Drivers !
STEP 2 :
-Download the recovery from ---> Link
-Download odin 3 Link
-Turn of your device and go to odin mode [ Vol down + power + home button (all at the same time) ] release it when you see Note Neo logo
-Press vol up to confirm
STEP 3 :
-Now that you are in odin mode connect your device via usb cable !
-Now open Odin3 3.09 that you have downloaded.
-If there is a pop-up like Installing ADB drivers let it get finished it is usually updates !!!!
-Make sure the COM : xx (xx is usb port number it can be any number so dont worry about it,just verify COM is lit up)
-Select the recovery (Link in STEP 2) ! Now select AP and browse to where you have .tar file and select it
MAKE SURE U UNTICK THE AUTO-REBOOT BUTTON
-Click Start
ONCE IT SAYS PASS ...REMOVE THE BATTERY ...THEN RE-INSERT THE BATTERY AND BOOT INTO RECOVERY USING VOL UP + HOME + POWER BUTTON
HOW TO ROOT THE DEVICE :
-Download SuperSu (obviously the latest one) from here ------> Click here !
-Copy that to internal sd card
-Power off your device and press vol up + power + home button (all at once)
-Select install zip from sdcard --->choose zip from sdcard ---> scroll down and flash UPDATE-SuperSU-v2.xx.zip
Done ! And you are ready to go
BUGS
YOU TELL ME [/SIZE]
NOTE : IF ANY OPTION DOESNT WORK FOR U ... TURN OFF UR PHONE AND THEN BOOT INTO RECOVERY
SOURCES
DEVICE TREE
KERNEL(PREBUILT ... THANX TO SAMSUNG ... AVAILABLE IN THE DEVICE TREE)
CREDITS
CM team for cwm
koush for cwm
philz3759 @Mersad_Maral for testing
RESERVED
rutvikrvr said:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
THIS RECOVERY WILL TRIP YOUR KNOX COUNTER ..AND UR WARRANTY WILL BE VOID
THIS RECOVERY IS ONLY FOR THE 3G dual sim VARIANT (SM-N7502) RUNNING KITKAT (4.4.2)
Philz recoveryorignal thread here
Why CWM ? Why not a pre-rooted firmware which will not void warranty?
Ans : CWM has many more functionality than stock recovery ! Rooting means to playing around with your device.If some thing goes wrong it you have to flash the whole firmware again instead,backup your ROM through CWM and if something goes wrong restore your backup AS SIMPLE AS THAT !
All you have to do is follow my instructions :
STEP 1 :
-Download and setup ADB drivers for your device
can be found here Drivers !
STEP 2 :
-Download the recovery from ---> Link
-Download odin 3 Link
-Turn of your device and go to odin mode [ Vol down + power + home button (all at the same time) ] release it when you see Note Neo logo
-Press vol up to confirm
STEP 3 :
-Now that you are in odin mode connect your device via usb cable !
-Now open Odin3 3.09 that you have downloaded.
-If there is a pop-up like Installing ADB drivers let it get finished it is usually updates !!!!
-Make sure the COM : xx (xx is usb port number it can be any number so dont worry about it,just verify COM is lit up)
-Select the recovery (Link in STEP 2) ! Now select AP and browse to where you have .tar file and select it
MAKE SURE U UNTICK THE AUTO-REBOOT BUTTON
-Click Start
ONCE IT SAYS PASS ...REMOVE THE BATTERY ...THEN RE-INSERT THE BATTERY AND BOOT INTO RECOVERY USING VOL UP + HOME + POWER BUTTON
HOW TO ROOT THE DEVICE :
-Download SuperSu (obviously the latest one) from here ------> Click here !
-Copy that to internal sd card
-Power off your device and press vol up + power + home button (all at once)
-Select install zip from sdcard --->choose zip from sdcard ---> scroll down and flash UPDATE-SuperSU-v2.xx.zip
Done ! And you are ready to go
BUGS
YOU TELL ME [/SIZE]
NOTE : IF ANY OPTION DOESNT WORK FOR U ... TURN OFF UR PHONE AND THEN BOOT INTO RECOVERY
SOURCES
DEVICE TREE
KERNEL(PREBUILT ... THANX TO SAMSUNG ... AVAILABLE IN THE DEVICE TREE)
CREDITS
CM team for cwm
koush for cwm
philz3759 @Mersad_Maral for testing
Click to expand...
Click to collapse
Hi
So thanks for Philz recovery.
Have good Time and good luke.
rutvikrvr said:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
THIS RECOVERY WILL TRIP YOUR KNOX COUNTER ..AND UR WARRANTY WILL BE VOID
THIS RECOVERY IS ONLY FOR THE 3G dual sim VARIANT (SM-N7502) RUNNING JELLYBEAN (4.3)
Philz recoveryorignal thread here
Why CWM ? Why not a pre-rooted firmware which will not void warranty?
Ans : CWM has many more functionality than stock recovery ! Rooting means to playing around with your device.If some thing goes wrong it you have to flash the whole firmware again instead,backup your ROM through CWM and if something goes wrong restore your backup AS SIMPLE AS THAT !
All you have to do is follow my instructions :
STEP 1 :
-Download and setup ADB drivers for your device
can be found here Drivers !
STEP 2 :
-Download the recovery from ---> Link
-Download odin 3 Link
-Turn of your device and go to odin mode [ Vol down + power + home button (all at the same time) ] release it when you see Note Neo logo
-Press vol up to confirm
STEP 3 :
-Now that you are in odin mode connect your device via usb cable !
-Now open Odin3 3.09 that you have downloaded.
-If there is a pop-up like Installing ADB drivers let it get finished it is usually updates !!!!
-Make sure the COM : xx (xx is usb port number it can be any number so dont worry about it,just verify COM is lit up)
-Select the recovery (Link in STEP 2) ! Now select AP and browse to where you have .tar file and select it
MAKE SURE U UNTICK THE AUTO-REBOOT BUTTON
-Click Start
ONCE IT SAYS PASS ...REMOVE THE BATTERY ...THEN RE-INSERT THE BATTERY AND BOOT INTO RECOVERY USING VOL UP + HOME + POWER BUTTON
HOW TO ROOT THE DEVICE :
-Download SuperSu (obviously the latest one) from here ------> Click here !
-Copy that to internal sd card
-Power off your device and press vol up + power + home button (all at once)
-Select install zip from sdcard --->choose zip from sdcard ---> scroll down and flash UPDATE-SuperSU-v2.xx.zip
Done ! And you are ready to go
BUGS
YOU TELL ME [/SIZE]
NOTE : IF ANY OPTION DOESNT WORK FOR U ... TURN OFF UR PHONE AND THEN BOOT INTO RECOVERY
SOURCES
DEVICE TREE
KERNEL(PREBUILT ... THANX TO SAMSUNG ... AVAILABLE IN THE DEVICE TREE)
CREDITS
CM team for cwm
koush for cwm
philz3759 @Mersad_Maral for testing
Click to expand...
Click to collapse
Hi
The philz touch recovery is not working completely.
First of all, I tried to wipe cash, when I wiped, tried to reboot device but after reboot, the phone was not boot normally and automatically booted into recovery.
I rebooted the device again but it goes to recovery again.
Then I decide to flash stock firmware using odin and did it.
After that flashed Philz recovery using odin and boot my device into recovery and it was OK.
Then I tried to install Update SU-v2.40.zip using recovery but the install zip is not working.
I tried it to install Super SU-v2.40.zip
But it was aborted.
It shows the bellow message…
E: failed to set up expected mount for install;aborted.
The zip file that I want to install using recovery is in my exsdcard.
I tried Mount and Storage….
There is no item for mounting exsdcard.
I tried every item in mounting and storage, but nothing was changed.
The backup and restore is not working too.
I flashed cwm recovery that you have made and tried to install the same zip file,
It’s ok. Install complete.
In CWM recovery backup and restore is not working.
Can you help to solve these problems?????
Thanks a lot.
Hi
The philz touch recovery is not working completely.
First of all, I tried to wipe cash, when I wiped, tried to reboot device but after reboot, the phone was not boot normally and automatically booted into recovery.
I rebooted the device again but it goes to recovery again.
Then I decide to flash stock firmware using odin and did it.
After that flashed Philz recovery using odin and boot my device into recovery and it was OK.
Then I tried to install Update SU-v2.40.zip using recovery but the install zip is not working.
I tried it to install Super SU-v2.40.zip
But it was aborted.
It shows the bellow message…
E: failed to set up expected mount for install;aborted.
The zip file that I want to install using recovery is in my exsdcard.
I tried Mount and Storage….
There is no item for mounting exsdcard.
I tried every item in mounting and storage, but nothing was changed.
The backup and restore is not working too.
I flashed cwm recovery that you have made and tried to install the same zip file,
It’s ok. Install complete.
In CWM recovery backup and restore is not working.
Can you help to solve these problems?????
Thanks a lot.
---------------
Sent from my SM-N7502 using XDA Free mobile app
Mersad_Maral said:
Hi
The philz touch recovery is not working completely.
First of all, I tried to wipe cash, when I wiped, tried to reboot device but after reboot, the phone was not boot normally and automatically booted into recovery.
I rebooted the device again but it goes to recovery again.
Then I decide to flash stock firmware using odin and did it.
After that flashed Philz recovery using odin and boot my device into recovery and it was OK.
Then I tried to install Update SU-v2.40.zip using recovery but the install zip is not working.
I tried it to install Super SU-v2.40.zip
But it was aborted.
It shows the bellow message…
E: failed to set up expected mount for install;aborted.
The zip file that I want to install using recovery is in my exsdcard.
I tried Mount and Storage….
There is no item for mounting exsdcard.
I tried every item in mounting and storage, but nothing was changed.
The backup and restore is not working too.
I flashed cwm recovery that you have made and tried to install the same zip file,
It’s ok. Install complete.
In CWM recovery backup and restore is not working.
Can you help to solve these problems?????
Thanks a lot.
---------------
Sent from my SM-N7502 using XDA Free mobile app
Click to expand...
Click to collapse
i've uploaded a new build .. try and let me know whether the bugs remain
rutvikrvr said:
i've uploaded a new build .. try and let me know whether the bugs remain
Click to expand...
Click to collapse
Hi
after booting the recovery, the error lines are appear (as I told in cwm and you said they are normal)
when I tried to install zip from exsdcard, the previous error was shown and the process abort.
(E: failed to set up expected mount for install;aborted.)
I tried to use backup and restor
and backup system, data, boot, recovery and efs to exsdcard.
the message appear that it's done.
I restart the phone and it is normal.
I used Esfile manager and brows to my exsdcard and folder clockworkmod.
these file is there.....
.last_install_path
.recovery_version
and a folder named "backup"
in backup folder there are 2 folders....
1 of them is .efs_backup (consist of 1 folder named "1970-01-29.22.56.33") and 2 other files (efs_19700129_225634.img and log.txt)
the other folder is 1970-01-29.22.57.01_noname that consist of 3 files (boot.img, nandroid.md5 and recovery .log)
I don't know that all of these are normal and every thing with backup and restore are OK????
Please let me know if any thing else that you need to know.
please guide me to do enough tests.
thanks alot.
Install zip from sdcard is not working yet
Mersad_Maral said:
Hi
after booting the recovery, the error lines are appear (as I told in cwm and you said they are normal)
when I tried to install zip from exsdcard, the previous error was shown and the process abort.
(E: failed to set up expected mount for install;aborted.)
I tried to use backup and restor
and backup system, data, boot, recovery and efs to exsdcard.
the message appear that it's done.
I restart the phone and it is normal.
I used Esfile manager and brows to my exsdcard and folder clockworkmod.
these file is there.....
.last_install_path
.recovery_version
and a folder named "backup"
in backup folder there are 2 folders....
1 of them is .efs_backup (consist of 1 folder named "1970-01-29.22.56.33") and 2 other files (efs_19700129_225634.img and log.txt)
the other folder is 1970-01-29.22.57.01_noname that consist of 3 files (boot.img, nandroid.md5 and recovery .log)
I don't know that all of these are normal and every thing with backup and restore are OK????
Please let me know if any thing else that you need to know.
please guide me to do enough tests.
thanks alot.
Install zip from sdcard is not working yet
Click to expand...
Click to collapse
wipe cache is working??
rutvikrvr said:
wipe cache is working??
Click to expand...
Click to collapse
Hi
Wipe cache is not working yet.
I tried to wipe cache, the process of wipe cache is so faster than before.
At the end, the message appear that shows wiping cache is complete.
After that I tried to restart phone to normal boot, but the phone does not boot normal and automatically boot into recovery.
I tried it 3 times but there was nothing changed.
I restored the files that backed up before using last version of philz recovery.
the message appear that restore is complete, but the phone did not boot normally and automatically boot into recovery.
I Flashed a firmware using odin and now the phone is booting normally.
RVR said:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
THIS RECOVERY WILL TRIP YOUR KNOX COUNTER ..AND UR WARRANTY WILL BE VOID
THIS RECOVERY IS ONLY FOR THE 3G dual sim VARIANT (SM-N7502) RUNNING JELLYBEAN (4.3)
Philz recoveryorignal thread here
Why CWM ? Why not a pre-rooted firmware which will not void warranty?
Ans : CWM has many more functionality than stock recovery ! Rooting means to playing around with your device.If some thing goes wrong it you have to flash the whole firmware again instead,backup your ROM through CWM and if something goes wrong restore your backup AS SIMPLE AS THAT !
All you have to do is follow my instructions :
STEP 1 :
-Download and setup ADB drivers for your device
can be found here Drivers !
STEP 2 :
-Download the recovery from ---> Link
-Download odin 3 Link
-Turn of your device and go to odin mode [ Vol down + power + home button (all at the same time) ] release it when you see Note Neo logo
-Press vol up to confirm
STEP 3 :
-Now that you are in odin mode connect your device via usb cable !
-Now open Odin3 3.09 that you have downloaded.
-If there is a pop-up like Installing ADB drivers let it get finished it is usually updates !!!!
-Make sure the COM : xx (xx is usb port number it can be any number so dont worry about it,just verify COM is lit up)
-Select the recovery (Link in STEP 2) ! Now select AP and browse to where you have .tar file and select it
MAKE SURE U UNTICK THE AUTO-REBOOT BUTTON
-Click Start
ONCE IT SAYS PASS ...REMOVE THE BATTERY ...THEN RE-INSERT THE BATTERY AND BOOT INTO RECOVERY USING VOL UP + HOME + POWER BUTTON
HOW TO ROOT THE DEVICE :
-Download SuperSu (obviously the latest one) from here ------> Click here !
-Copy that to internal sd card
-Power off your device and press vol up + power + home button (all at once)
-Select install zip from sdcard --->choose zip from sdcard ---> scroll down and flash UPDATE-SuperSU-v2.xx.zip
Done ! And you are ready to go
BUGS
YOU TELL ME [/SIZE]
NOTE : IF ANY OPTION DOESNT WORK FOR U ... TURN OFF UR PHONE AND THEN BOOT INTO RECOVERY
SOURCES
DEVICE TREE
KERNEL(PREBUILT ... THANX TO SAMSUNG ... AVAILABLE IN THE DEVICE TREE)
CREDITS
CM team for cwm
koush for cwm
philz3759 @Mersad_Maral for testing
Click to expand...
Click to collapse
Hi, can you publish your device tree at github? Your link gives 404.
bigbiff said:
Hi, can you publish your device tree at github? Your link gives 404.
Click to expand...
Click to collapse
https://github.com/rutvik95/android_device_samsung_hl3gds ..here you go ...
Is there any new version of recovery for N7502 to be tested?
We are so thanks to you because of your work to built a recovery for this kind of smartphone.
Sent from my SM-N7502 using XDA Free mobile app
Hi
I have sent some error of Phil recovery.
Is it possible for you to solve them and make a new test recovery?
Thanks in advance.
Sent from my SM-N7502 using XDA Free mobile app
Mersad_Maral said:
Hi
I have sent some error of Phil recovery.
Is it possible for you to solve them and make a new test recovery?
Thanks in advance.
Sent from my SM-N7502 using XDA Free mobile app
Click to expand...
Click to collapse
Hi,
PM Me your Hangouts Email Id I need your help has tester for custom rom's and for device specific files
Hi
I don't use hangout.
This is my mail
[email protected]
Please let me know if you need anything else.
Sent from my SM-N7502 using XDA Free mobile app
jackeagle said:
Hi,
PM Me your Hangouts Email Id I need your help has tester for custom rom's and for device specific files
Click to expand...
Click to collapse
Does You making custom rom for Note 3 Neo duos ? Have You something for testing ?
Tnx
instal zip not wrking for me.help
Install zip work in CWM but doesn't in Philz
Usb mass storage connection available and working in Philz but not in CWM
Non of both recoveries can mount system partition...i wanted to mount it to edit it with aroma file manager
Adb sideloading doesn't work in both recoveries too...it worked in stock recovery
Best Regards
hi managed to fix your cwm recovery.. it seems to be working for me now , can mount and backup i didnt tried flashing yet
Disclaimer
Code:
#include <std/disclaimer.h> /* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about rooting your device * before doing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. */
Downloads
Instructions
Unlock your bootloader if you haven't already. Detailed steps can be found here.
Download the ADB and fastboot tools, TWRP Recovery IMG file and Magisk zip from the link above.
Extract the ADB zip into a folder and copy the recovery file into the same folder as well.
Copy the Magisk zip file into your phone's internal storage.
Rename the recovery file to recovery.
In the ADB folder and click on the MFA32 to open a command prompt window.
Connect your phone to your PC and go to the Developer Options previously enabled. Find the USB Debugging option and enable it.
Now hold the Volume + Power Down buttons that will allow the phone to boot into Fastboot mode.
In the fastboot mode, type: fastboot devices.
If your device is detected, great. If not, check your connections, USB Debugging or see if proper device drivers are installed or not.
Next, type: fastboot flash recovery recovery.img. This will flash the recovery in a few seconds.
Next, type: fastboot reboot recovery. As a result, you are welcomed by the recovery screen.
Here, click on Install. Find the previously downloaded Magisk zip and select it to flash. This will flash the required binaries.
Reboot.
Open Play Store and install the Magisk Manager. This will allow you to take proper advantage of your root by using multiple modules with many features.
Enjoy!
Full Guide can be found here - http://xboard.in/redmi-6-pro-recovery-root/.
twrp recovery not reading internal storage.
Hi,
I have a Redmi 6 Pro Indian version with unlocked Boot-loader, MIUI Global 10.2 stable. Flashed twrp recovery (Sakura) successfully but booting into the recovery mode I find it cann't read internal memory (showing 0 MB) and I can't flash necessary files through it for rooting my device.
On rooting into twrp recovery mode, first asks for password for un-encription and when I provide device unlock password, after sometime, it shows password failed.
On tapping 'cancel' option, goes to home of twrp with no option to flash from internal storage since it is 0MB.
Fastboot getvar anti command shows nothing [ anti: (blank)]. Fastboot getvar all shows Rollback ver 2.
Please help.
@Aloke17 Your data are encrypted. You have to do format data. Notice that your internal memory will be erased. Make a backup before.
mar.ur said:
@Aloke17 Your data are encrypted. You have to do format data. Notice that your internal memory will be erased. Make a backup before.
Click to expand...
Click to collapse
It did not work. Have already done that with same result. Can you tell me if I can flash from external storage like otg pendrive etc.?
Aloke17 said:
It did not work. Have already done that with same result. Can you tell me if I can flash from external storage like otg pendrive etc.?
Click to expand...
Click to collapse
I think you did a wipe data, not format. Look at the picture below
mar.ur said:
I think you did a wipe data, not format. Look at the picture below
Click to expand...
Click to collapse
I know difference. Formatted data, not wiped. got same result.
Aloke17 said:
I know difference. Formatted data, not wiped. got same result.
Click to expand...
Click to collapse
Restart again to twrp after format
This is what I did (make sure the TWRP.img and lazy flasher zip (attached) are in the same directory as the adb folder):
1. Put phone to fastboot mode.
2. Run ADB command fastboot boot twrp.img (the twrp image downloaded). Phone will reboot into TWRP. It will ask for password to decrypt, just hit back and ignore it for now.
3. Go to Wipe, Format Data. Swipe to Factory Reset. Advanced Wipe: Dalvik/ ART Cache, Cache, System, Internal Storage.
4. Go to Mount and mount System.
5. Run ADB command adb push twrp.img /sdcard
6. Go to Install, Install Image, select the TWRP.img file that you just pushed and flash it as recovery but don't reboot yet.
7. Run ADB command adb push lazyflasher-no-verity-opt-encrypt.zip /sdcard
8. Go to Install, Install Zip, select the zip file that you just pushed.
9. Go to Reboot. Power Off.
10. Boot the Device into TWRP Recovery (press volume up + power button).
Hope this helps a noob like me who wasn't able to flash TWRP due to strange errors.
PS: Bootloader was unlocked and device was running MIUI 10.2.2 Stable (Chinese ROM). I switched to Revenge OS (from XDA) based on Android Pie after this.
Can anyone please tell me how to get rid of SAKURA anti rollback. I'm currently on miui rom global beta 9.6.27..????
I waana flash xiaomi.eu rom on my phone.
I bricked my phone while flashing EU rom direct through twrp.
I followed this guide and it worked. The good thing about this guide is you can mess up and then get the mobile back to working state. I copied from a blog but can not post the link as i have fewer than 10 posts.
The contents of the blog in case if its deleted
1. unlock bootloader.
1.1 To unlock bootloader linking your mobile number to the device is mandatory to unlock bootloader. Read my rant[1] at the end of this post during the flashing as it takes some time. For now move to step 2 after unlocking the bootloader
2. check if the bootloader is unlocked by running the command "fastboot oem device-info"
3. flash the system image.
3.1 Download the image from the mi.com site sakura_india_global_images_V10.3.2.0.PDMMIXM_20190527.0000.00_9.0_global_0aaaa35167.tgz # md5sum 0aaaa35167e8edd299f0dd9418f04c62
3.2 untar
3.3 cd sakura_india_global_images_V10.3.2.0.PDMMIXM_20190527.0000.00_9.0_global/
# poweroff mobile, press volume down + poweron to go to fastboot mode
3.4 ./flash_all.sh
4 twrp flashing using boot and not flash because flashing to recovery parition is successfull but the recovery boot does not launch twrp so use the temporary method(flashboot boot)
4.1 fastboot boot twrp-3.2.3-0-sakura.img # md5sum 16759dcc425042d6a63b635f777a7690
4.2 twrp -> advanced settings ->sideload -> check both the cache to wipe -> swipe
4.3 adb sideload Magisk-v19.4.zip # md5sum 2a1def27607601ecaa780ee4b15210c2
4.4 flashing lazyflasher went in to loading forever, so skip that. it works without lazy flashing
5. reboot will boot to system and then download the MagiskManager apk from its website
5.1 enable the developer options for adb to transfer the MagiskManager apk to mobile
5.2 adb push MagiskManager-v7.3.4.apk /sdcard # md5sum 16e9ad8767665234dea7896a4137288e
5.3 on the mobile install the apk
6. to test it
6.1 adb shell
6.2 su
6.3 the above command should pop up requesting for permissions for root.
[1] Rant on Xiaomi's lies on embracing developer culture
TLDR: Xiaomi don't lie about embracing the hacker ethic. Accept you are evil with some lame excuse that is much more respectable.
It is very evil of Xiaomi to make the user provide their mobile number(thats right, you must provide your **working** sim card number) to unlock the bootloader. They will not unlock if your sim is not active, you must enable internet on your sim, link the sim number to mi account and only then they will unlock the bootloader. If you just use wifi it is not supported and yet they lie on their faq that the need sim for data usage.
Here is the faq they do not say about the sim card requirement . I have archived it in case after reading this Xiaomi might change this faq
The Following is the Q&A of faq
> Isn't locking bootloader against Mi's 'geek' spirit?
> Locking bootloader is aimed to provide a better user experience, which we've been trying to do the whole time. In the meantime, we've provided an unlocking tool for senior users who know their ways around flashing and tweaking their devices.
> The unlocking procedure will need Internet access to get the unlocking password. Also, the Mi Account logged in on the Mi phone and the unlocking tool needs to be the same. Otherwise, the unlocking request will be denied. This will ensure that ill-intentioned people will not get access to your personal data.
Atleast the moto company wanted just the device id to unlock bootloader.
I was rooting for Xiaomi a long back when i saw their faq where the question was "Can i root my mi mobile " and the answer was something along the lines of "Of coures you can, what do you think of us . we embrace hacker ethic. Now i can not find a link to this faq. Is someone find this please comment the link, i will add here.
Hope this guide helps some one.
grv29a said:
Can anyone please tell me how to get rid of SAKURA anti rollback. I'm currently on miui rom global beta 9.6.27..????
I waana flash xiaomi.eu rom on my phone.
I bricked my phone while flashing EU rom direct through twrp.
Click to expand...
Click to collapse
Just try to unlock bootloader as i did.
After flashing, is there any 'unlock' under Mi Logo? If no, need to unlock again.
* introduction *
Hello,
before you hate me, please let me to say why I wrote this guide- it is for ultra noob guys, beginners or just for organize almost all files for tweaks and fixes for this phone. Because I noticed myself that it was beginning to make a mess with it, so I decited to write this guide which (what I mensioned) contains tweak and fixes to known bugs that are in the software.
Ready? Staddy? GO!
* warning *
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and if you point the
* finger at me for messing up your device, I will laugh at you.
*
*/
I. Bootloader unlocking
We will start our journey in a beautiful world modified by android with unlocking the bootloader.
What is it?
Bootloader is something like BIOS from computers but in the phone. It let you to boot many software, like recovery. We can't boot directly into recovery without unlocked bootloader because phone has got some closed startup procedure (like POST test in computers). To break it, we must unlock bootloader.
So how to do that?
We must:
1. Download RAR file and you'll get 2 folders namely unlock and ASUS_Android_USB_drivers_for_Windows
2. Install the drivers according to your OS and go the unlock folder
3. Reboot your phone to fastboot mode by pressing volume up + power on at the same time.
4. Connect it to pc and open unlock.bat in unlock folder
5. Bootloader successfully unlocked.
II. Install TWRP
After unlocking bootloader, we need some recovery to install custom software on our beast.
To do that:
1. Download this TWRP (F2FS support) and place it into unlock folder
2. Reboot into fastboot
3. Connect the phone into PC
4. In unlock folder, run cmd and type "fastboot devices". You should see some device plugged into your PC.
5. Type "fastboot flash recovery XXX.img" when XXX means the name of recovery.
6. When installing process finish, press volume down + power as long as you doesn't see fastboot warning.
7. Phone will get into TWRP.
To get into TWRP just presss volume down + power until you doesn'ts see fastboot warning.
III. Decrypt enrypted data
1. Download the decrypt.zip and copy to SDcard
2. Flash in recovery
3. Format /data
4. Reboot
IV. Flashing custom ROMs
Now the main aim of customization: CUSTOM ROM <3 It let you to do many modifications like style of font in system, theme, newer version of software and many many more.
Just:
1. Copy all your necessary software into SD card
2. Boot your device into TWRP
3. Go to "install", pick firmware which you need and swipe to flash
4. Repeat step 3 with gapps
5. Reboot to system
When you want to install some kernel or NXP or magisk or something else, don't do that after flashing system. Before, flash firmware, system and gapps, reboot and configure. Then go to TWRP and flash 3rd party mods.
V. Unlocking Camera2API
To get GCAM work property, we need to unlock camera2api. If you don't know what's that, go there -> https://www.thegeeksclub.com/camera-2-api-check-smartphone-support/
1. Power off the phone and enter fastboot mode.
2. Fire up fastboot terminal and connect your phone to the pc, enable USB debugging mode from dev. options too.
3. Run the command: fastboot oem enable_camera_hal3 true
4. Type: fastboot reboot
VI. Magisk
Just to get root permissions. If you don't know what it is, go there -> https://www.xda-developers.com/what-is-magisk/
1. Go to TWRP and flash this file
2. Reboot to system
3. Install .apk
VII. Some other useful files
TWRP: https://drive.google.com/open?id=1dhjV0p00AiZ83eF5iUA6o9fdx6zsQYTF
GAPPS: https://opengapps.org
CUSTOMROMS: https://forum.xda-developers.com/asus-zenfone-max-pro-m1/development
FIRMWARES:
339 https://drive.google.com/open?id=1EIRZ1HrJQaOynq48lfhYWaHd9L0fhPU5
Pie https://drive.google.com/open?id=1xwFFadooMD2DJqI9dClcCuojAFwHfdtV
NXP: https://drive.google.com/open?id=1lfRGXlf3q53kLMZDOvLe4jMr3szQPLQd
MAGISK:
.zip https://drive.google.com/open?id=1HrZUdL7ZgVWfuDg7PWOL_DZrwsmNzrRf
.apk https://drive.google.com/open?id=1jFee8Mx0pwCcyE729h33gyfaIfHxNgVI
GCAMS:
Arnova https://drive.google.com/open?id=1R1Sfw0DdKXZxYWDkEvH8ODpWHkUjnkxk
MGC https://drive.google.com/open?id=1YowAmosszfoCJCORjcwE7OQzxOuqY7ql
If you have any observations, remarks - write to me!
Thanks for all XDA community,
~ALYSKY
Reserved
Sir can you plz tell me does this method works on 6gb varient? With firmware version .340
Is this method for XOOT or XOOTD?
My model is XOOTD ....
Dewashish03 said:
Sir can you plz tell me does this method works on 6gb varient? With firmware version .340
Is this method for XOOT or XOOTD?
My model is XOOTD ....
Click to expand...
Click to collapse
I tested it on 4/64 X00TD variant and it worked.
ALYSKY said:
I tested it on 4/64 X00TD variant and it worked.
Click to expand...
Click to collapse
Thax for replay...
Does this twrp can be flashed successful on .340 and pie?
Do we need different versions of twrp to flash on different android version like .239 .240 and pie?
Dewashish03 said:
Thax for replay...
Does this twrp can be flashed successful on .340 and pie?
Do we need different versions of twrp to flash on different android version like .239 .240 and pie?
Click to expand...
Click to collapse
It doesn't matter. You can use the same version of TWRP on different version of firmware.
can this method work on X00TD android pie stock rom. @ALYSKY
unable to install twrp, the drivers are well installed, the bootloader is to unlock I use the original cable usb, I try on several usb port, always the same error message
failed remote requested download size is more than max allowed
my model X00TD
please help me
I have installed twrp recovery and can boot into it but i cant find the magisk or decrypt files to swipe in the recovery. please help
noob858 said:
I have installed twrp recovery and can boot into it but i cant find the magisk or decrypt files to swipe in the recovery. please help
Click to expand...
Click to collapse
U need to put them in your sd card and then you have to select storage (external) and then flash them
lokesh773 said:
U need to put them in your sd card and then you have to select storage (external) and then flash them
Click to expand...
Click to collapse
ok im supernoob at this. nut how do i put it to sd card?? i mean i dont have any sd card inserted.
noob858 said:
ok im supernoob at this. nut how do i put it to sd card?? i mean i dont have any sd card inserted.
Click to expand...
Click to collapse
Use pc to transfer it to sd card....if you dont have sd card you can use pendrive...
Every NKOTB is desperate to post his/her/it's thread / YouTube video for such guide/s, quoting stuff from other's posts / threads and sharing their hard work, without the basic decency to quote and credit the original thread / guy who posted in the first place. Please do so or this thread will be reported for plagiarism.
angixspirit said:
unable to install twrp, the drivers are well installed, the bootloader is to unlock I use the original cable usb, I try on several usb port, always the same error message
failed remote requested download size is more than max allowed
my model X00TD
please help me
Click to expand...
Click to collapse
have you tried to install the driver?
I've updated my phone to latest official pie (.053) . Does these steps still applicable or there is any changes? Please kindly update the guide if there is any changes.
guys i tried to flash recovery but after that.. it does nothing.. i just got blank screen. No TWRP screen
Update 1 : Without TWRP I was able to install Magisk via Manager but after flashing patched image file. I now no longer able to start mobile.. it always gets to recovery screen. somebudy help
Update 2 : I used another boot image and patched it with Magisk and now I am able to boot phone but now it stuck on logo screen
Update 3 : I was using totally differnt boot image .. I extracted it from offical stock rom. Now I booted my phone also did root. Now question is how to install TWRP and dyscript.zip
Update 4 : TWRP or RWRP not working so Now I am not able to decrypt my phone. Help
hi why theres a password in twrp?
ALYSKY said:
* introduction *
1. Download RAR file and you'll get 2 folders namely unlock and ASUS_Android_USB_drivers_for_Windows
2. Install the drivers according to your OS and go the unlock folder
3. Reboot your phone to fastboot mode by pressing volume up + power on at the same time.
4. Connect it to pc and open unlock.bat in unlock folder
5. Bootloader successfully unlocked.
Click to expand...
Click to collapse
Hi,
First of all, thank you for the detailed steps and instructions.
I downloaded the RAR mentioned in the step 1 above. When I click open after downloading, there's an error preventing me to open. I also tried extracting but I'm unable to do so.
Please provide me the updated link or reupload the file so that I can download it,
Thanks.
unlock.bat file is missing is the unlock folder...what to do?
this is showing when trying to istall twrp
what to do?
@ALYSKY
Code:
*
*Your warranty is now void.
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
How to convert to Wileyfox swift (crackling) from Android one 2gen (seed)
THIS ONLY WORK ON Qualcomm Snapdragon 410 (MSM8916)
Basic Requirements \/
1.Proper brain with Knowledge about ADB and flash.
2.Phone With Unlock bootloader.
3.Working Computer.
4.Reliable USB cable.
5.BACK UP YOUR DATA
(If your Phone is not Unlock bootloader) Go this from Wiki.lineageos[url]https://wiki.lineageos.org/devices/seed/install#unlocking-the-bootloader[/URL]
Get ADB from Wiki.Lineageos here [url]https://wiki.lineageos.org/adb_fastboot_guide.html#on-windows[/URL]
LET DO THIS.
Download the cm-13.0-ZNH0EAS2NH-crackling-signed-fastboot-2306277a34.zip here (no more link) [I had to remove the DL link BC of i am new user lol, due of xda rule, you can find via androidfilehost.com or search on Google.]
Then extract all files (without folder) and put directly in to platform-tools. Now open "Windows PowerShell" then type this command to run ADB and Fastboot
Code:
cd where you put the platfrom-tools
Ex. cd C:/user/download/platfrom-tools
hit enter on your keyboard to run.
Now Boot your phone to fastboot. To do this hold Volume down + Power Button now plug your phone to PC
Once the phone is in fastboot mode, verify your PC finds it by typing
Code:
fastboot devices
If you see your phone then proceed. (If not try different usb or reinstalling the ADB drivers and Fastboot Driver before you go.)
(Warning!!!! Follow carefully the command may ended up will break your phone if you don't follow and will erase all of your data. Just i warn you!!!!)
Type this all command
Code:
fastboot erase DDR
fastboot erase userdata
fastboot flash sbl1 sbl1.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot flash tz tz.mbn
fastboot flash boot boot.img
fastboot flash splash splash.img
fastboot flash cache cache.img
fastboot flash recovery recovery.img
fastboot erase system
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot reboot
Wait to boot
And now setup your phone now........
Go back to fastboot then flash the TWRP
To flash TWRP go here [url]https://wiki.lineageos.org/devices/crackling/install#installing-a-custom-recovery-using-fastboot[/URL] this take you to wiki.lineageos
Now... FIND THE ROM YOU LIKE
(Note: only you install crackling rom not seed)
You're done.....
Need help? Just ask me here.
Special thanks (AKA Credits)
Lineageos and wiki.lineageos
@JominatorX
@m192
@SubwayChamp (for helping me)
Knowing Bugs........
1.Blue Screen flicker (all Phone )
2.Camera may or not working sometimes, Blue Screen occur will reboot your phone............. (Only on Foxy Kernel)
3.Battery may bug out (All of Them )
(To fix just discharge the battery/phone. To do this power off your phone and remove the battery then Holding Down the Power Buttons for Few 30sec then put it back your battery and power on your phone.)
4.GPS will be not super accuracy unlike the stock rom
(As of Ang 13 2019 lineage os developer they fix the GPS accuracy)
5.i-mobile iQ II 8150 poor RAM due of 1GB of ram
(To fix this Install Android Go enabler)
That it, i can find some more bugs but i need more testing
I have 4 phone to test (i own)
Cherry Mobile G1 (H220)
General Mobile 4G / 4G Dual (GM-113)
i-mobile iQ II (8150)
Hi all,
Haven't seen a guide for this and thought I would write one for myself and others
DISCLAIMER* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
You will also lose any L3 Widevine DRM Certification, aka no more HD netflix. Please keep this in mind.
REQUIREMENTS:
SDK Platform-tools (Get it here)
Getting boot.img
Download Lenovo Rescue and Smart assistant.
Link: https://support.lenovo.com/au/en/downloads/ds101291-rescue-and-smart-assistant-lmsa
You'll need a lenovo ID, Sign in or register an account
and once there go to "Rescue" > Tablet Rescue
Input your serial number > Make sure it finds the tablet > Click Start Rescue to download the firmware
The download is about 2.6GB
Navigate to
Code:
C:\ProgramData\RSA\Download\RomFiles\YT_J706F_S000049_211204_ROW
Which should have the firmware and boot.img
LET'S BEGIN!
Extract the SDK Platform tools folder to an easily accessible directory
UNLOCKING THE BOOTLOADERNOTE: THIS WILL ERASE ALL DATA FROM YOUR DEVICE SO MAKE SURE TO TAKE A BACKUP IF NECESSARY
Extract the SDK Platform tools folder to an easily accessible directory
Go to Settings > About Tablet > Tap build number 7 times. Go back to main page of Settings > System > Developer options and enable OEM unlocking and USB Debugging
Reboot the system to bootloader (Press Vol - and Power key or type "adb reboot bootloader" by opening a command prompt window in Platform tools directory)
To unlock bootloader run the command
Bash:
fastboot flashing unlock
The device will do a factory reset and restart itself
After Setting up your device install the magisk app from GitHub. I recommend Magisk-v24.3 as that's what worked for me.
Link: https://github.com/topjohnwu/Magisk/releases
ROOTING [MAGISK] - Using Fastboot
Transfer your boot.img to Internal Storage
You can use the command:
Bash:
adb push .\boot.img /storage/emulated/0/
After installing the magisk app Go to Install > Select and Patch a File
Select the boot.img you transferred to Internal Storage. Magisk will patch your boot.img and display the output folder after the process.
Transfer the Patched boot.img to your computer and rename it to boot_patched.img
Bash:
adb pull /storage/emulated/0/Download/magisk_patched-[random_text].img
Reboot to Bootloader
Bash:
adb reboot bootloader
Flash the patched image
Code:
fastboot flash boot boot_patched.img
You also need to flash vbmeta.img. This file is available in the firmware folder.
Bash:
fastboot flash vbmeta --disable-verity --disable-verification vbmeta.img
Reboot the device by typing
Code:
fastboot reboot
Check Magisk manager and the device must be rooted now
TroubleshootingBoot loop after flashing magiskCould be a variety of things. Make sure that:
You've flashed vbmeta.img
You're using v24.3 of magisk
To get back to a working stage you can flash the stock boot.img and vbmeta.img. To enter fastboot mode just hold Vol - (Vol Down) + Power button forever until the fastboot mode text appears on the screen.
fastboot not detecting deviceYou'll have to install a driver manually from device manager.
Install a driver already on this computer
Select Android Phone
Select Google
Select Android ADB composite driver
After that fastboot could recognise my tablet
ThanksJohannj22 For the guide on another version of lenovo tablet which I followed https://forum.xda-developers.com/t/...of-lenovo-yoga-smart-tab-and-root-it.4387131/
Ofc Magisk for the ability to root so easily.
One of my first posts, sorry if there's any mistakes and let me know if there's any. There wasn't a forum for the yoga tab 11 so I posted here. I've been looking for months on how to root and I'm glad I figured it out and this post is here for others.
After typing flashing unlock command it enters fasboot mode and nothing happens, Left it for a while and nothing changed.
If I remember correctly it printed something on the fast boot screen when it started and when it's done. Then I rebooted into android to verify that it was actually wiped.
Hi,
about loosing L3 widevine, i assume this will also loose Amazone Prime HD, correct?
Also, will L3 Dome Back If i Go Back top Stock? Or are there any known workarounds to geht IT Back?
Noob Questions i assume, sorry, but maybe you can clarify
Ender
Tablet new, first rooted, thx. for manual!