When I download images from my gmail account it automatically saves to a folder called "download" and the files are automatically named "downloadfile," "downloadfile-1," "downloadfile-2" and so on. I would then move and rename the images I've downloaded into a different file to be more organized. BUT, when I download a new image from gmail, it appears in my Gallery as the image that was downloaded previously that shared the same "downloadfile" name. When I click on the image, the previous image appears for a second before the current image is shown. When I back out to tile view, the previous image appears again.
I've tried deleting the "download" folder but a new folder gets created when I download an new image and I still experience the same issue.
Has anyone else experienced this? How do I fix?
have you tried rebooting the device ?? ... i had a simmilar kind of an issue .. with a file showing up in the gallary when it was suppose not to show up in galary.. but a simple reeboot (switching off and switching on) got rid of the problem...
Yes, that was the first thing I've did (a few times too). I even took the battery out for good measure but I still have the same problem. :/
Hey all,
Loving my nice shiny new O2X but having some problems using the LG On-Screen Phone software, the one that lets you control your phone from your PC. I have it all installed and followed the user guide but when I attempt to connect to the phone after putting the password in (still 0000 as default), I press next to connect and can see that it causes the phone to wake up and a screen icon appear in its notification bar but then I get an error on the software saying "An error occurred while creating the OSP window after downloading the skin file from the mobile phone" this messages times out then it shows "Failed to connect to phone" and I'm back to the password screen.
Obviously some communication must be occurring for the phone to wake up and try to start the appropriate app but it just isn't working.
So far I have tried it with USB debugging on and off and have also tried reinstalling the USB drivers on the PC, no luck.
Has anyone else experienced this or have any advice?
Thanks
Russ
Hmph, tried this on 3 PCs now with the same results
I‘m only able to get it run for once, the other times are having problem like yours.
Sent from my LG-P990 using XDA App
Slightly better off than me but glad I'm not alone!
I emailed LG support but I got a cut and paste template response telling me how to download the LG Suite in the first place, which I have obviously already done!
Hi, I just tried again now and it worked... here I attached a screen shot..
then after quitting, it's back to normal (i.e. can't connect again!).. it's weird
Hmph, just tried flashing ROM to MCR Fr11 and still have the same issue
Just discovered a log file in My Documents saying this...
13:39:39 - -----------------------
13:39:39 - OSP_ConnectService
13:39:39 - type:1, param:8
13:39:39 - OnOspEvent::OSP_CONTEXT_UPDATE_EVT
13:39:39 - OnOspEvent::OSP_CONTEXT_TYPE_EDIT_MODE
13:39:39 - Edit Mode : True
13:39:39 - OnOspEvent::OSP_CONTEXT_UPDATE_EVT
13:39:40 - OnOspEvent::OSP_AUTHENTICATE_RESULT_EVT
13:39:40 - OnOspEvent::OSP_CONNECTED_EVT
13:39:40 - connect value : 0
13:39:40 - OnOspEvent::OSP_GET_MODEL_EVT
13:39:40 - COSPScreenWnd:arsingPhoneXML - File not found(\\boxserver\Russell Oakes\LG OSP\Phone_skin\P990\P990.xml)
13:39:40 - OnOspEvent::OSP_FTP_PROGRESS_EVT
13:39:40 - OnOspEvent::OSP_FTP_PROGRESS_EVT
13:39:40 - OnOspEvent::OSP_FTP_PROGRESS_EVT
13:39:40 - OnOspEvent::OSP_FTP_PROGRESS_EVT
13:39:40 - OnOspEvent::OSP_FTP_PROGRESS_EVT
13:39:40 - OnOspEvent::OSP_FTP_GET_EVT (SUCCESS!)
13:39:40 - COSPScreenWnd:arsingPhoneXML - File not found(\\boxserver\Russell Oakes\LG OSP\Phone_skin\P990\P990.xml)
13:39:43 - OnOspEvent::OSP_DISCONNECTED_EVT
13:39:43 - OSP_Connect : Fail
Which would suggest that a file isn't being successfully copied to the PC, could someone upload the contents of their "LG OSP\Phone_skin\P990" folder from My Documents?
Thanks
Woohooo got it working!
I had to go to /system/media and copy off the file osp_skin_p990.zip to my PC and extract it to the "LG OSP\Phone_skin\P990" folder in My Documents and then it worked!
So it looks like the program was unable to automatically download and extract this file for some reason, just needed a little manual intervention. Strange that it happened on 3 PCs though, which would suggest that maybe the file is located somewhere unexpected on my handset?
There is another thing that is not really user friendly.
On the connexion Assistant, if the model of the phone is not selected on the bottom right corner combo box, the connexion is not working but the error is not really usefull.
I had to copy the files in "My Documents\LG OSP\Phone_skin\P990" (thank you roakes ) and then had to select the model P990 in the combo box and then it worked.
It is working in USB and Bluetooth
Hello guys!
Im also having this problem, but my system/media is empty! And my "My Documents/LG OSP/Phone_skin" does not contains P990 Can anyone upload or tell me where I can get the contents?
same here... i've copied P970 phone skin, installed all LG drivers... no luck. still cannot connect phone to OSP. really suck!
I have a worse situation here, even if all my drivers are installed i still get a failed to connect to mobile phone message everytime I try on the computer
lws803 said:
I have a worse situation here, even if all my drivers are installed i still get a failed to connect to mobile phone message everytime I try on the computer
Click to expand...
Click to collapse
Same problem
Any news ??? did you solve it ?
Edit:
ok with unistall lg programs and reinstall lg pc suite and from that install OSP
Edit :
There is no way to fix it now...
This is the error in the OSP log :
16:39:00 - OSP_ConnectService
16:39:00 - type:1, param:27
16:39:04 - OnOspEvent::OSP_DISCONNECTED_EVT
16:39:04 - connect value : 1
16:39:04 - OSP_Connect : Fail
16:39:17 - OSP Start : Setup version 0.4.27.20110628
16:39:19 - LGBTCON_IPC_IsInitialized() or LGBTCON_IPC_InitializePCBT() function fail
Try rebooting your phone, works for me every time
Sent from my Optimus 2X using XDA App
try to disable usb debuging if it is enabled
In my case both on froyo & gb it wont give me any prob, I think u can try to install updated version of osp & USB drivers.
Sent from my Optimus 2X using XDA App
I have found a way around this.
I own a LGP930 and also got this "skin error" problem. I noticed in the
My Documents\LG OSP\Phone_skin directory, there were other skins already present. Now these are simply image files that will "contour" your phone's screen.
I looked up the images in a folder labeled "720x1280" and they seemed pretty similar. Along with these images there is an xml file that (I am only assuming here) manages the logic of the image names and placement on the display. My folder, labeled "P930" (my phone, in other cases, your own model) was empty .
The solution:
1. Copy the files from the models available that represent the best your phone and paste them into your model's folder. If it does not exist, create it.
2. Rename the xml file to your model's name, in my case it was P930, which is also the folders name (not sure if this is critical, but to be safe just do so).
3. Open the file with notepad (notepad>open or right-click then edit).
you should see these tags:
Code:
<on-screen-phone id="P930" version="2.0">
<model>LG-P930</model>
<name>P930</name>
I renamed all these (there were named "720X1280"). Fill these tags with the model of your phone, again.
4. Run the software. It should now be working. This is all model-specific, so it will be different everytime and if you do not have the exact name it won't load.
5. Optional: Edit the images to whatever you like as long as they have the same name and have fun.
Hope this helps out anyone who will find this topic.
Cheers,
Sphero09
Sphero09 said:
I have found a way around this.
I own a LGP930 and also got this "skin error" problem. I noticed in the
My Documents\LG OSP\Phone_skin directory, there were other skins already present. Now these are simply image files that will "contour" your phone's screen.
I looked up the images in a folder labeled "720x1280" and they seemed pretty similar. Along with these images there is an xml file that (I am only assuming here) manages the logic of the image names and placement on the display. My folder, labeled "P930" (my phone, in other cases, your own model) was empty .
The solution:
1. Copy the files from the models available that represent the best your phone and paste them into your model's folder. If it does not exist, create it.
2. Rename the xml file to your model's name, in my case it was P930, which is also the folders name (not sure if this is critical, but to be safe just do so).
3. Open the file with notepad (notepad>open or right-click then edit).
you should see these tags:
Code:
<on-screen-phone id="P930" version="2.0">
<model>LG-P930</model>
<name>P930</name>
I renamed all these (there were named "720X1280"). Fill these tags with the model of your phone, again.
4. Run the software. It should now be working. This is all model-specific, so it will be different everytime and if you do not have the exact name it won't load.
5. Optional: Edit the images to whatever you like as long as they have the same name and have fun.
Hope this helps out anyone who will find this topic.
Cheers,
Sphero09
Click to expand...
Click to collapse
Good job , my lg f320K work finel
F120L
keilien said:
Hello guys!
Im also having this problem, but my system/media is empty! And my "My Documents/LG OSP/Phone_skin" does not contains P990 Can anyone upload or tell me where I can get the contents?
Click to expand...
Click to collapse
In my case, just delete the folder LG OSP and then run the software again. A new one will be created automatically.
I just got an LG K7 MS330 from metro to upgrade from my LG F6 and I can no longer use On screen phone. I attempted what I interpreted this process to be and had no results. If you know a way please tell me.
The usual "LG Software" option in the connection type menu is not on the newer K7 as it was on the older F6, it only allows Charge only, MTP and PTP.
Please help
Upon trying to install the new Android Studio, I got this error. I can not find anything related to Android on my control panel. I have previously installed the apks, but I believe I have completely removed them. Anyone know how to fix this?
Picture of error is in the attachments.
favorite
I have tried different solutions but none of them seem to work for me. I have installed the latest AS on my Windows 7. Everything downloaded fine(I'm not behind any proxy) However, when I try to create a new Project, after I set the name,Activity name(which I live as default) and finish the settings, a message pops up saying "Gradle Build"; It keeps building but I don't know what it's doing.
I've tried the following steps to fix it: -Deleted .gradle so that it creates a fresh one as the original might be corrupted -Downloaded gradle manually and pointed AS to this -Downloaded gradle zip manually and put it in .gradle>wrapper>dists>2.14.1>numbers>zip file here
Any idea how to fix this?
Thanks
Hi, I have a problem with editing metadata in Windows 10 (updated).
When I try to save for example edited rating on picture in File Explorer I get error message "Error 0x88982F52: There is too much metadata to be written to the bitmap."
I don't have problem with every picture taken by P10 stock camera, just about 1/3 of them.
Does anybody have same problem?
Is it bug in stock camera app?
--update
And ExifToolGUI also shows warning to all pictures taken by P10:
Warning: [minor] Unrecognized MakerNotes
Click to expand...
Click to collapse