My phone keeps getting stuck on fastboot mode.
I'll flash the standard MIUI ROM using the MiFlash Tool, then I flash a custom recovery and a custom ROM(EvolutionX in this case), everything works and I can set up my phone, but as soon as I reboot I can no longer boot into android or recovery. i've tried flashing multiple recoveries using fastboot and straight up booting a recovery using "fastboot boot recovery.img" but it still always go to fastboot. The only solution is to start the process all over again, and obviously that's just not an option since I can never turn my phone off after that.
Any tips?
I think I got it solved, at least I got it to reboot into Android and TWRP.
I used this guide, but I'll write the steps I took here in case you're having the same issue. I wound up using xiaomi.eu MIUI rom, but it shouldn't matter what you use, I'll assume you're stuck in fastboot.
Do "fastboot flash vendor vendor.img", you get this vendor.img from the fastboot version of the official MIUI ROM, after you decompress the .tar.gz it should be in the "images" folder
Do "fastboot flash recovery twrp.img" then "fastboot boot twrp.img", this should flash twrp as your recovery and then boot into it, for some reason it only worked with the official twrp, not orange fox.
Assuming you got into TWRP you should now flash the latest firmware(I got mine from xiaomifirmwareupdater.com) make sure you download just the firmware not the entire rom, mine was named something like fw_raphael_miui... .zip
Format data (not wipe, format, it's a separate option in TWRP), it should ask you to type yes, so do that.
Flash whatever ROM you want
Hopefully this helps you, I hate finding forum posts marked "solved" but with no instructions. I also tried the "vbmeta_dv_shivsom.img" method some threads mentioned but it didn't work
Here's a pastebin of the guide I used in case the original link goes down
You can get all the files I mentioned from xiaomifirmwareupdater.com and the official TWRP site
Out of all that, the one instruction that solves it is the format data step. This is the magic step required. You always need to do this when flashing over MIUI.
Flashing vendor was totally irrelevant.
This will tell you what you need to do.
Simple Guide to flashing successfully
Here's a quick guide to some of the basics. Which recovery. ---------------------------- Use the latest from here. https://forum.xda-developers.com/k20-pro/development/recovery-unofficial-twrp-xiaomi-redmi-t3944363/post79823568 Do not use Orange...
forum.xda-developers.com
Thanks a lot man! I'm having this issue and it is beyond annoying. I've lost so much time with this BS.
Edit: Does not help actually
I just had the same problem with my Lamentablet.
I was trying stuff up and restarted it in fastboot mode and got stuck there.
So, ways to deal with it:
adb reboot recovery
rebooted the tablet in recovery mode. All I had then was to press the power button to activate Reboot. Solved! From now on it boots normally.
Meanwhile I had discovered that by typing
fasboot continue
the tablet would resume, but at the next reboot cycle, power down + up cycle or reboot after a crash, the tablet would reboot into fastboot mode...
And I found this out when it crashed (it's not called a Lamentablet for nothing!).
Luckily I had a PC with Linux around. It didn't have the software installed but drivers were already in the Kernel and installing adb and fastboot was a matter of mere seconds. If I didn't have an easily ready PC at hand, this tablet would have become a brick until plugged in and rebooted...
OMG Thanks dude.... I'm literally working to installing custom rom on redmi 7a from stock rom but I don't know what reason that make my phone always stuck on fastboot when format data, before this was fine.
Osga21 said:
I think I got it solved, at least I got it to reboot into Android and TWRP.
I used this guide, but I'll write the steps I took here in case you're having the same issue. I wound up using xiaomi.eu MIUI rom, but it shouldn't matter what you use, I'll assume you're stuck in fastboot.
Do "fastboot flash vendor vendor.img", you get this vendor.img from the fastboot version of the official MIUI ROM, after you decompress the .tar.gz it should be in the "images" folder
Do "fastboot flash recovery twrp.img" then "fastboot boot twrp.img", this should flash twrp as your recovery and then boot into it, for some reason it only worked with the official twrp, not orange fox.
Assuming you got into TWRP you should now flash the latest firmware(I got mine from xiaomifirmwareupdater.com) make sure you download just the firmware not the entire rom, mine was named something like fw_raphael_miui... .zip
Format data (not wipe, format, it's a separate option in TWRP), it should ask you to type yes, so do that.
Flash whatever ROM you want
Hopefully this helps you, I hate finding forum posts marked "solved" but with no instructions. I also tried the "vbmeta_dv_shivsom.img" method some threads mentioned but it didn't work
Here's a pastebin of the guide I used in case the original link goes down
You can get all the files I mentioned from xiaomifirmwareupdater.com and the official TWRP site
Click to expand...
Click to collapse
thanks bro. flashing vendor after a format from twrp did the good
Related
My phone is almost bricked
I was trying to install sevenrov v3.2 while i was on v3.1 and i ****ed up everything while doing a fullwipe
Right now there is only fastboot&rescuemode available
twrp is not working, because it does no read the digitizer(i cannot press anything)
i can install cwm but should i ?
I believe that is best to flash images through fastboot.
But what images should i flash?
Where to find them?
How should i flash them?
revery0 said:
My phone is almost bricked
I was trying to install sevenrov v3.2 while i was on v3.1 and i ****ed up everything while doing a fullwipe
Right now there is only fastboot&rescuemode available
twrp is not working, because it does no read the digitizer(i cannot press anything)
i can install cwm but should i ?
I believe that is best to flash images through fastboot.
But what images should i flash?
Where to find them?
How should i flash them?
Click to expand...
Click to collapse
Oh dear! You are in a mess. All I can suggest is that you flash the stock recovery and then install a stock ROM for your phone using the force update (dload) method that has been described in other threads. Then you can return to a custom ROM of your choice. As far as I know CWM for this phone is only in Chinese so it may be of little value unless you understand the language.
arthios said:
Oh dear! You are in a mess. All I can suggest is that you flash the stock recovery and then install a stock ROM for your phone using the force update (dload) method that has been described in other threads. Then you can return to a custom ROM of your choice. As far as I know CWM for this phone is only in Chinese so it may be of little value unless you understand the language.
Click to expand...
Click to collapse
cwm has english also but it has no use for me
Only fastboot works
dload method does not complete, the blue progress bar goes up to to 85% and stays there forever...
I am looking for a mathod to create a flashable zip for fastboot
to use fastboot flash filename.zip command
or flash each partition seperatly , i tried the method with huawei extractor
extracted the images system,root,boot,cache,cust,userdata
flashed each one on their partitions
but without success
revery0 said:
cwm has english also but it has no use for me
Only fastboot works
dload method does not complete, the blue progress bar goes up to to 85% and stays there forever...
I am looking for a mathod to create a flashable zip for fastboot
to use fastboot flash filename.zip command
or flash each partition seperatly , i tried the method with huawei extractor
extracted the images system,root,boot,cache,cust,userdata
flashed each one on their partitions
but without success
Click to expand...
Click to collapse
Why you do not flash twrp recovery in fastboot mode and then install a flashable ZIP?
Edit:
In this thread, are the same probs:
http://forum.xda-developers.com/showthread.php?p=56634210
Short: install recovery and try to flash a rom again.
I See your post in this thraed that this not work for you but i think you have to try it again. In fastboot mode you can flash recovery and cust. Its that working?
Can you explain step by step what are you doing?
87insane said:
Why you do not flash twrp recovery in fastboot mode and then install a flashable ZIP?
Edit:
In this thread, are the same probs:
http://forum.xda-developers.com/showthread.php?p=56634210
Short: install recovery and try to flash a rom again.
I See your post in this thraed that this not work for you but i think you have to try it again. In fastboot mode you can flash recovery and cust. Its that working?
Can you explain step by step what are you doing?
Click to expand...
Click to collapse
First of all thank you,
Right now my phone is in a bootloop(not more than 6 sec duration, with short vibration)
3 buttons , power button tricks and combos don't seem to work
The only way to exit the bootloop is by sending the fastbbot reboot recovery command and wait for some loops while you are doing the vol+vol-power combo
Then the phone enters fastboot rescue mode
I get reply when sending the fastboot devices command,
And the phone has unlocked bootloader (OEM command)
I can flash images extracted from the official 135 ROM
I tried cust boot user data system cache recovey , and the are all flashed correctly
But I can't get into recovery mode aftethe reboot (yes I am doing the 3 buttons trick)
I tried different SD cards with different update.app each time, from b135 official and sevenrom3 (yes I put them in /dload folder)
I even tried flashing cwm and twrv recovery images in the recovery partition, but I got in a bootloop after the reboot again
So I am asking if there is anyway to flash the partitions correctly from fastboot or maybe send a kernel image with some offset and run it with the fastboot command
Of course adb does not work, not responding
Maybe reparation the storage?
I don't know
And I am desperare...
revery0 said:
First of all thank you,
Right now my phone is in a bootloop(not more than 6 sec duration, with short vibration)
3 buttons , power button tricks and combos don't seem to work
The only way to exit the bootloop is by sending the fastbbot reboot recovery command and wait for some loops while you are doing the vol+vol-power combo
Then the phone enters fastboot rescue mode
I get reply when sending the fastboot devices command,
And the phone has unlocked bootloader (OEM command)
I can flash images extracted from the official 135 ROM
I tried cust boot user data system cache recovey , and the are all flashed correctly
But I can't get into recovery mode aftethe reboot (yes I am doing the 3 buttons trick)
I tried different SD cards with different update.app each time, from b135 official and sevenrom3 (yes I put them in /dload folder)
I even tried flashing cwm and twrv recovery images in the recovery partition, but I got in a bootloop after the reboot again
So I am asking if there is anyway to flash the partitions correctly from fastboot or maybe send a kernel image with some offset and run it with the fastboot command
Of course adb does not work, not responding
Maybe reparation the storage?
I don't know
And I am desperare...
Click to expand...
Click to collapse
Okay...
your system is so messy. we must bring fully to factory condition first time.
Plesse try to flash stock recovery img. (In your post you write only that you have tryed twrp/cwm).
And then try update in recovery.
I not think your phone is broken. You can try my tool (http://forum.xda-developers.com/asc...eandadjust-t2941186/post56774286#post56774286). There is a stock recovery img in it. In your case you have to flash cust img to.
87insane said:
Okay...
your system is so messy. we must bring fully to factory condition first time.
Plesse try to flash stock recovery img. (In your post you write only that you have tryed twrp/cwm).
And then try update in recovery.
I not think your phone is broken. You can try my tool (http://forum.xda-developers.com/asc...eandadjust-t2941186/post56774286#post56774286). There is a stock recovery img in it. In your case you have to flash cust img to.
Click to expand...
Click to collapse
Thank you but I already did flash the official recovery image, both extracted from a factory update.app and your recovery.IMG also... None of them worked.... Iam still in the same bootloop.
I am starting to believe that the partitions have been ****ed up.
Any way to repartition?
Also is there a procedure to create a flashable zip with huawei software extractor? I edited the accompaning XML to add the p7 device on the list (copy data from p6 and changed the name) created the zip but fastboot doesn't flash the zip because its missing 2 XML files which I can't remember their name.
And at this point I would like to give my 2 cents of advice to everyone who might listen,
Before you flash anything from a microsd, first verify the card with h2testw, and always use high quality microsd and never ever stop a flashing procedure by any means. . i would like to make it more extreme and advise to use a software with copy verification (like richcopy) when you copy files that are going to be flashed.
I tend to believe that a faulty microsd is the cause of my problems... Even though I checked the microsd afterwards and didn't got any errors.
I would advise the ROM creators to append this on their posts!
Hi,
I'm having a bit of trouble. I had a brand new Redmi 4X, and I was advised to install TWRP, root it, and install the Xiaomi.eu rom until LineageOS is released. I unlocked the bootloader, flashed TWRP, managed to get into it once and now I can't do it again. When TWRP loaded it asked me for a password for decryption but it let me just skip it it seems (not sure if that is the problem) but now I can't boot normally, I can't boot into recovery, but fastboot seems to work okay. How do I go about fixing this?
I've tried reflashing TWRP but I still can't get to it, and I don't really know enough about this stuff to know where I've gone wrong.
UPDATE - I think this is to do with dm-verity and having the stock kernel installed. Now it's too late to undo what I've already done, so I hope to god that someone knows how to fix this.
UPDATE - Right, the problem is solved I think. I had to do an awful lot of googling, and I'm not entirely sure what it was specifically that fixed it. But I found a guide that taught me the fastboot command "fastboot boot twrp.img" which saved the day. Even when my phone wouldn't let me into recovery, it allowed me to flash a no-verity.zip which i think is what allowed me to boot, and it allowed me to flash superSU.zip and then the ROM I was aiming for. And now I've booted into the ROM successfully and hopefully I am rooted and all is well. Plus I can access TWRP as normal now.
Any help would be greatly appreciated
Can you boot into TWRP by pressing the buttons so that you boot directly to TWRP??
Have you tried Command Prompt to boot with commands in to recovery??
And if you get into TWRP you should have everything on the SDCard and then just
format all things except SDCard and then flash from SDCard everything
That is what I would try..and yes it ask for a password but just skip it to get to it
If you can get into TWRP to flash from SDCard then you good to go..if not
Google all the commands for CMD..and plug your phone to the PC and flash everything with the
commands.....
Let us know what is working and what not and what steps exectly you are doing
EDIT
Turn off your device > Press and hold “Power” and “Volume +” buttons at the same time.
After short vibration signal release the power button and wait for TWRP to start.
To boot in stock recovery open “Update” app.
In the setting select “Boot in recovery”.
brljak83 said:
Can you boot into TWRP by pressing the buttons so that you boot directly to TWRP??
Have you tried Command Prompt to boot with commands in to recovery??
And if you get into TWRP you should have everything on the SDCard and then just
format all things except SDCard and then flash from SDCard everything
That is what I would try..and yes it ask for a password but just skip it to get to it
If you can get into TWRP to flash from SDCard then you good to go..if not
Google all the commands for CMD..and plug your phone to the PC and flash everything with the
commands.....
Let us know what is working and what not and what steps exectly you are doing
EDIT
Turn off your device > Press and hold “Power” and “Volume +” buttons at the same time.
After short vibration signal release the power button and wait for TWRP to start.
To boot in stock recovery open “Update” app.
In the setting select “Boot in recovery”.
Click to expand...
Click to collapse
Thanks for the reply. I can't get into TWRP. Even if I could get into TWRP how would I get files on the phone to flash them?
Is it possible to flash any rom from the pc directly and if it is will this possibly help? I think it's not booting because the kernel is still stock.
I'm not sure what you mean in the edit, how do I boot into stock recovery without being able to boot the phone (and when I have already flashed TWRP)?
brokemyG2 said:
Thanks for the reply. I can't get into TWRP. Even if I could get into TWRP how would I get files on the phone to flash them?
Is it possible to flash any rom from the pc directly and if it is will this possibly help? I think it's not booting because the kernel is still stock.
I'm not sure what you mean in the edit, how do I boot into stock recovery without being able to boot the phone (and when I have already flashed TWRP)?
Click to expand...
Click to collapse
Hii
I just have been reading about this bootloop
Go over here and read all of the 6 pages..will not take much time but could help you out much
https://forum.xda-developers.com/xiaomi-redmi-4x/development/official-twrp-3-2-1-0-xiaomi-redmi-4x-t3718217
Hey, I have exactly the same problem. Latest stock rom, flashed twrp in fastboot and got into the boot loop. Nothing works. I can only enter fastboot. What exactly did you do then? What is this no-verity.zip? I can't find anything about it.
I had a problem
I unlocked bootloader then installed redwolf recovery and took a nandroid backup. After that i rebooted to system but stuck into bootloop, could not boot to recovery, could not boot into system, So the only thing worked was that i flashed fastboot rom with mi flasher. And syccessfully rebooted to system with bootloader locked and stock recovery. So, if anyone have same problem you can do the same. How do i install recovery safely again? Should i use TWRP only? Should i flash v3.1.0 with lazy flasher or v3.2 directly without lazy flasher? I don't want to stuck into bootloader again, have to get all data deleted.
Hello,
I tried the latest V11.0.6.0.QFAEUXM ROM but I didn't like it and so I booted into my TWRP recovery and restored the latest fullbackup I made from 2 days ago, then rebooted.
Now I'm stuck in Fastboot loop.
$ fastboot reboot
and
$ fastboot reboot recovery
... have literally no effect, still the phone is stuck in fastboot mode uppon restart.
I read in another thread "just use MiFlash tool and revert to stock rom, do everything all over to rescue your phone".
OK, fine. I start MiFlash, it asks me to unlock my phone... I click unlock. Nothing happens, I click again "try unlock again", then "no need to repeat unlock" appears, nothing happens, the usual menu with the options to flash or install TWRP are missing.
:good: really good! Just as expected. Very user friendly.
Now what?
I had twrp-3.3.1-37-cepheus-mauronofrio.img (SHA-1: A3230E7918A9E3D3D939AA8619B40E47A54F645D) as recovery and my ROM was xiaomi.eu_multi_MI9_V11.0.4.0.QFACNXM_5e64190eb9_v11-10.zip (SHA-1: 714BD02A5D52720C2733E2FDA9730EECE441AE09) before I tried to flash miui_CEPHEUSEEAGlobal_V11.0.6.0.QFAEUXM_1647340073_10.0.zip (SHA-1: BAC6307DA99F766E35A6EDBB0B74D02F73AD2782) and everything went downhill from there.
MiFlash version: miflash_unlock-en-3.5.719.27.zip
Is there more info I can provide?
EDIT / UPDATE:
I've been following the instructions from a Youtube video (links below) by the letter and now at least I'm back in a sane / stock ROM state where I can (have to) redo everything fromm the beginning.
Sources:
https://www.youtube.com/watch?v=GuAHNFjK--o
Instructions:
https://highonandroid.com/android-s...rick-unroot-xiaomi-android-stuck-on-fastboot/
Download site:
https://xiaomifirmware.com/roms/download-official-miui-roms-for-xiaomi-mi-9/
(I downloaded & used "cepheus_eea_global_images_V10.2.17.0.PFAEUXM_20190327.0000.00_9.0_eea_b2470d1b08.tgz")
I chose "clean all" as flash method in that XiaomiMiFlash Tool.
It will reboot into Stock ROM, in my case I chose the EU version.
From there you can activate Developer Options & USB-Debugging again and you're set to go customizing again.
Ohhh looks not amazing
Did you've tried to flash recovery via adb?
Laptapper said:
Ohhh looks not amazing
Did you've tried to flash recovery via adb?
Click to expand...
Click to collapse
I tried:
$ fastboot flash recovery twrp-3.3.1-37-cepheus-mauronofrio.img
$ fastboot reboot recovery
It boots straight into Fastboot again.
I don't even know what to say at this point. I literally only wanted to restore a fullbackup. How can this possibly happen in the first place?
I'm really close to smashing this phone in 1000 pieces...
anthropaki said:
I tried:
$ fastboot flash recovery twrp-3.3.1-37-cepheus-mauronofrio.img
$ fastboot reboot recovery
It boots straight into Fastboot again.
I don't even know what to say at this point. I literally only wanted to restore a fullbackup. How can this possibly happen in the first place?
I'm really close to smashing this phone in 1000 pieces...
Click to expand...
Click to collapse
What I suggest you to do is flash the latest TWRP from Mauronofrio which is 3.3.1-52.
After successfully flashing the recovery, immediately press vol up + power button until it reboots.
Do not reboot using the command line or turn off your phone.
In TWRP, flash the xiaomi.eu ROM version that your backup is based on.
Then perform a restore from the backup that you had made.
Sent from my MI 9 (Cepheus) using Tapatalk
Thanks, but I fixed it already.
As I described / updated in the OP there is a tool with which you can use some firmware roms in tgz format to flash over the fastboot state to get a "stock rom-ish" state back.
Once in the stock rom you have to go through the basic setup routine and then activate USB Debugging, then you can install TWRP, other Roms as per usual.
I can only seem to get into fastboot mode with a Menu saying:
Restart Bootloader
Unlock Bootloader (Unlocked)
Wipe Userdata
Exit
I haven't been able to get to any download mode at all, just this menu and stock recovery, can someone please give me instructions on this? I've gotten different files and ways to root this from many different threads and I'm confused as hell.
Never rooted this RP2 before, it's on latest OTA MR2-RC001-RZR-190914.3123. Got it unlocked before and it's been unlocked for a while but didn't go further with rooting because I got confused and didn't want to brick my expensive phone. Last phone I rooted was back on kitkat or lollipop before I switched to iPhone, so I'm not a total noob just rusty. But Razer got me back to Android and it''s changed alot. I need detailed advice please. :good: And if my instinct is telling me correctly I'd assume something is changed about the bootloader in MR2 thats affecting me right now?
That menu is the bootloader/download mode.
DarkestSpawn said:
That menu is the bootloader/download mode.
Click to expand...
Click to collapse
My issue was not having Bootloader interface installed. Fixed
MarkusGingles said:
My issue was not having Bootloader interface installed. Fixed
Click to expand...
Click to collapse
Have you unlocked critical partition?
https://developer.razer.com/razer-p...6.1692205032.1582602359-1206928491.1581902985
Razer recommends you use a USB 3 Type-A to Type-C spec-compliant cable for any device flashing.
THE CABLE THAT CAME WITH THE PHONE WILL NOT WORK.
If you have everything unlocked then make sure you do this
https://s3.amazonaws.com/cheryl-fac...stall_Android_Fastboot_Drivers_on_Windows.pdf
Or install using this tool
https://forum.xda-developers.com/android/general/tool-adb-fastboot-installer-tool-windows-t3999445
If you make it this far then it's a matter of typing in the correct path in fastboot.
fastboot flash boot "arter97 name here".img
Then from the fastboot menu scroll down to boot to recovery or type fastboot reboot recovery
TWRP should boot if you installed the correct kernel.
In TWRP hit cancel then swipe to make modifications and install magisk 20.3
Profit
JDBarlow said:
Have you unlocked critical partition?
https://developer.razer.com/razer-p...6.1692205032.1582602359-1206928491.1581902985
Razer recommends you use a USB 3 Type-A to Type-C spec-compliant cable for any device flashing.
THE CABLE THAT CAME WITH THE PHONE WILL NOT WORK.
If you have everything unlocked then make sure you do this
https://s3.amazonaws.com/cheryl-fac...stall_Android_Fastboot_Drivers_on_Windows.pdf
Or install using this tool
https://forum.xda-developers.com/android/general/tool-adb-fastboot-installer-tool-windows-t3999445
If you make it this far then it's a matter of typing in the correct path in fastboot.
fastboot flash boot "arter97 name here".img
Then from the fastboot menu scroll down to boot to recovery or type fastboot reboot recovery
TWRP should boot if you installed the correct kernel.
In TWRP hit cancel then swipe to make modifications and install magisk 20.3
Profit
Click to expand...
Click to collapse
Okay so I couldn't flash anything originally simply because i didn't have Bootloader Interface installed. Figured that out and had everything working, unlocked, Arter Kernel 12, Magisk 20.3, EdXposed, and now after I edited build.prop to enable my regular hotspot without carrier permission and reboot. Well now I really can't flash sh?t. Even though I can get into bootloader & Recovery, when I try to fastboot flash MR1 Stock or MR2 stock just to get back into the phone it freezes on the razer logo and eventually reboots and repeats. Then i have to Reflash arter to get back into TWRP after I try to flash anything else which otherwrites Arter97.img. Finally read the red text in TWRP and /data was refusing to mount, fixed that by a basic ass wipe (DUH) Hoping that might have been the issue, my data folder was corrupt or my old data folder was mismatching with the rest of the new roms i tried to flash? Idk someone smarter plz tell me. So far my next attempt is going to be downloading a flashable Stock Deodoxed ZIP to see if flashing from within TWRP now that /Data will mount makes a difference compared to Fastboot. Tried fastboot flashing MR1 and MR2 Normal Razer Stock Rom after data remounted and now i can get to the green vortex/visualizer screen instead of just the Razer Logo before it STILL loops and then when it loops again a second time it sends me to TWRP automatically.
MarkusGingles said:
Okay so I couldn't flash anything originally simply because i didn't have Bootloader Interface installed. Figured that out and had everything working, unlocked, Arter Kernel 12, Magisk 20.3, EdXposed, and now after I edited build.prop to enable my regular hotspot without carrier permission and reboot. Well now I really can't flash sh?t. Even though I can get into bootloader & Recovery, when I try to fastboot flash MR1 Stock or MR2 stock just to get back into the phone it freezes on the razer logo and eventually reboots and repeats. Then i have to Reflash arter to get back into TWRP after I try to flash anything else which otherwrites Arter97.img. Finally read the red text in TWRP and /data was refusing to mount, fixed that by a basic ass wipe (DUH) Hoping that might have been the issue, my data folder was corrupt or my old data folder was mismatching with the rest of the new roms i tried to flash? Idk someone smarter plz tell me. So far my next attempt is going to be downloading a flashable Stock Deodoxed ZIP to see if flashing from within TWRP now that /Data will mount makes a difference compared to Fastboot. Tried fastboot flashing MR1 and MR2 Normal Razer Stock Rom after data remounted and now i can get to the green vortex/visualizer screen instead of just the Razer Logo before it STILL loops and then when it loops again a second time it sends me to TWRP automatically.
Click to expand...
Click to collapse
Have you tried the format data partition ?
MarkusGingles said:
Okay so I couldn't flash anything originally simply because i didn't have Bootloader Interface installed. Figured that out and had everything working, unlocked, Arter Kernel 12, Magisk 20.3, EdXposed, and now after I edited build.prop to enable my regular hotspot without carrier permission and reboot. Well now I really can't flash sh?t. Even though I can get into bootloader & Recovery, when I try to fastboot flash MR1 Stock or MR2 stock just to get back into the phone it freezes on the razer logo and eventually reboots and repeats. Then i have to Reflash arter to get back into TWRP after I try to flash anything else which otherwrites Arter97.img. Finally read the red text in TWRP and /data was refusing to mount, fixed that by a basic ass wipe (DUH) Hoping that might have been the issue, my data folder was corrupt or my old data folder was mismatching with the rest of the new roms i tried to flash? Idk someone smarter plz tell me. So far my next attempt is going to be downloading a flashable Stock Deodoxed ZIP to see if flashing from within TWRP now that /Data will mount makes a difference compared to Fastboot. Tried fastboot flashing MR1 and MR2 Normal Razer Stock Rom after data remounted and now i can get to the green vortex/visualizer screen instead of just the Razer Logo before it STILL loops and then when it loops again a second time it sends me to TWRP automatically.
Click to expand...
Click to collapse
Will it not let you flash stock using flash_all.bat file while in fastboot mode?
I would definitely try and start over for sure if possible
Trying to flash TWRp after unlocking bootloader. First time i tried it, said successful but booted to MIUI recovery
2nd time i tried said again successful, booted to TWRP, formatted data.
Phone then wouldnt reboot to TWRP. Instead it going straight to fastboot. I keep trying to flash again, every time saying successful, then it just boots to fastbooot, not recovery. Any ideas, phones dead at the minute
Tones1971 said:
Trying to flash TWRp after unlocking bootloader. First time i tried it, said successful but booted to MIUI recovery
2nd time i tried said again successful, booted to TWRP, formatted data.
Phone then wouldnt reboot to TWRP. Instead it going straight to fastboot. I keep trying to flash again, every time saying successful, then it just boots to fastbooot, not recovery. Any ideas, phones dead at the minute
Click to expand...
Click to collapse
The best way to recover the phone in your situation is to fastboot flash MIUI.
Get the latest MIUI fastboot ROM for your phone from here
https://xiaomifirmwareupdater.com/miui/raphael/
Install it using this guide from the official MIUI forums
https://c.mi.com/oc/miuidownload/detail?guide=2
If you see a blank page on a mobile browser, set it to view in desktop mode, for this page.
Make sure in step 5 you change the option at the bottom of the Mi Flash Tool to 'clean all' before hitting the Flash button.
MIUI will restore stock recovery when it reboots, so you need to do something to fix this. Flashing Magisk or a custom ROM will automatically preserve TWRP.
If you plan to keep MIUI and do not want Magisk, then you need to flash the vbmeta patcher from here
https://forum.xda-developers.com/k2...icial-twrp-xiaomi-redmi-t3944363/post79823568
You need to flash TWRP, then immediately boot into TWRP.
Code:
fastboot flash recovery <path to twrp>
fastboot oem reboot-recovery
At this point you need to flash something in order to preserve TWRP (either a new custom ROM, Magisk, or the vbmeta patcher)
Cheers. You know this is all familiar. Pretty sure i had the same trouble 3 years ago with my mi mix 2
Anyway, lots of hiccups on the way along with this solution. Got to the point now where it says its flashing but it never stops.
EDIT: Bit more research, shortened the path names. Got an error. Commented out device name, got a different error. Switched to USB 2.0 port an FINALLy im back up and running.
Thank you so much for the help.