Hi, I have a problem in my Redmi 9 power when i try to flash any custom recovery it flashes but when i try to boot into the recovery i get just a black screen, i tried different recoverys but i get the same result
Send SS along with steps which u did!
LinhBT said:
Send SS along with steps which u did!
Click to expand...
Click to collapse
i just follow this guide https://twrpupdate.com/twrp-recovery-on-redmi-9-power/
and this one too https://forum.xda-developers.com/t/...t-r11-1-juice-lime-citrus-unofficial.4257459/
hamid_dabouz said:
Hi, I have a problem in my Redmi 9 power when i try to flash any custom recovery it flashes but when i try to boot into the recovery i get just a black screen, i tried different recoverys but i get the same result
Click to expand...
Click to collapse
did you unlock bootloader your phone first?
zoel.fahmi said:
did you unlock bootloader your phone first?
Click to expand...
Click to collapse
Yes of course
hamid_dabouz said:
Yes of course
Click to expand...
Click to collapse
can you tell me a bit about how do you flash it
also include the filename of your flashed file.
zoel.fahmi said:
can you tell me a bit about how do you flash it
also include the filename of your flashed file.
Click to expand...
Click to collapse
i just follow this guide https://twrpupdate.com/twrp-recovery-on-redmi-9-power/
and this one too https://forum.xda-developers.com/t/...t-r11-1-juice-lime-citrus-unofficial.4257459/
I'm having the same problem. Tried these two guide but i can't go into recovery. When i run 'fastboot reboot recovery' i got blank black screen.
Has anyone managed to solve this problem? I have the bootloader unlocked and I've tried all the methods and recoverys but always with no success. When I try to enter the recovery using the fastboot commands or the button combination, the screen goes black and the recovery is not installed. mine is redmi 9t
If you can access fastboot just try back to miui through mi flash tool
wijiono said:
If you can access fastboot just try back to miui through mi flash tool
Click to expand...
Click to collapse
Thanks for the answer but I didn't make myself understood. I was referring to the problem that is described in the first post and also happens to me
hamid_dabouz said:
Hi, I have a problem in my Redmi 9 power when i try to flash any custom recovery it flashes but when i try to boot into the recovery i get just a black screen, i tried different recoverys but i get the same result
Click to expand...
Click to collapse
Yes same problem my moto g9 plus Odessa hardbrick problem please solve my problem please create blank flash file
Did you follow this steps:
1. fastboot devices
2. fastboot --disable-verity --disable-verification flash vbmeta vbmetaname.img
3. fastboot flash recovery recoveryname.img
4. fastboot reboot recovery
This process no work my phone my connect to pc Qualcomm HS-USB QDLoader 9008 show only not work other way
Also try "fastboot boot twrp.img". This will not flash twrp but boot into it i.e. it will disappear after next reboot. so flash everything immediately after booting twrp
ItsAsfar said:
This process no work my phone my connect to pc Qualcomm HS-USB QDLoader 9008 show only not work other way
Click to expand...
Click to collapse
your phone is hard bricked
I need moto g9 plus Odessa xt2087-2 qpas 30 retail blank flash file ...... Please upload anyone
LR7875 said:
your phone is hard bricked
Click to expand...
Click to collapse
Any other solution
wijiono said:
Did you follow this steps:
1. fastboot devices
2. fastboot --disable-verity --disable-verification flash vbmeta vbmetaname.img
3. fastboot flash recovery recoveryname.img
4. fastboot reboot recovery
Click to expand...
Click to collapse
My device is not bricked. And even doing these steps by fastboot does not install recovery. He gets the black screen. And then I press the power button and it restarts normally, but without having the custom recovery installed. Do I need vbmeta patched? I have this installed miui_LIMEGlobal_V12.0.16.0.QJQMIXM_ae9abfb546_10.0 and it extracts vbmeta to do these steps but with no effect
Related
my phoe is broken i need to flash twrp and i cant to do it ,i setup cyanogenmod recovery by mistake and this recovery is fault because i cant even transfer any files form computer to mobile .. i try to flash with sp tool but it give me error because my phone is broken ,i try also dirtycow v11 on my phone to try flash twrp but it cant read phone on the computer and i setup V21 rom ??
sorry for bad english
any HElp plaese?
meroher said:
any HElp plaese?
Click to expand...
Click to collapse
How you mean broken?
Can it boot to fastboot mode?
YEP IT CAN BOOT TO FASTBOOT ?! then what?
mrmazak said:
how you mean broken?
Can it boot to fastboot mode?
Click to expand...
Click to collapse
plaese man help me my mob is still broken ineed it now
meroher said:
plaese man help me my mob is still broken ineed it now
Click to expand...
Click to collapse
I don't get notified that you answer if you do not quote.
you only answered one of the questions. You did not tell what is "broke"
no help you if you do not know what you need help with.
mrmazak said:
I don't get notified that you answer if you do not quote.
you only answered one of the questions. You did not tell what is "broke"
no help you if you do not know what you need help with.
Click to expand...
Click to collapse
oki iget it
first i had a twrp recovery and i try to install other recovery so
i install this recovery
https://forum.xda-developers.com/r1-hd/development/beta-cyanogenmod-recovery-blu-r1-hd-t3462614
and this recovery cant let me to install any rom or to back to install twrp recovery
and blu cant boot up he freeze on blu white screen
any thing else i will tell you
thanks for you help
meroher said:
oki iget it
first i had a twrp recovery and i try to install other recovery so
i install this recovery
https://forum.xda-developers.com/r1-hd/development/beta-cyanogenmod-recovery-blu-r1-hd-t3462614
and this recovery cant let me to install any rom or to back to install twrp recovery
and blu cant boot up he freeze on blu white screen
any thing else i will tell you
thanks for you help
Click to expand...
Click to collapse
Ok you installed this cm recovery with twrp?
android is not booting. (v21)
the cm recovery does boot but not allow install anything.
And fastboot is loading.
probably need to fastboot flash boot.img , I will share a superSU patched version. (you do not need to root system if not wanted, but patched boot is needed to boot a moddified system)
and fastboot flash twrp.
download this zip.
extract files to your desktop
use these fastboot commands to test first
This one to boot the phone
Code:
fastboot boot %userprofile%\Desktop\su-boot.img
This one to boot twrp
Code:
fastboot boot %userprofile%\Desktop\twrp_p6601_7.1_recovery.img
mrmazak said:
Ok you installed this cm recovery with twrp?
android is not booting. (v21)
the cm recovery does boot but not allow install anything.
And fastboot is loading.
probably need to fastboot flash boot.img , I will share a superSU patched version. (you do not need to root system if not wanted, but patched boot is needed to boot a moddified system)
and fastboot flash twrp.
download this zip.
extract files to your desktop
use these fastboot commands to test first
This one to boot the phone
Code:
fastboot boot %userprofile%\Desktop\su-boot.img
This one to boot twrp
Code:
fastboot boot %userprofile%\Desktop\twrp_p6601_7.1_recovery.img
Click to expand...
Click to collapse
Quote:
FIRST WHEN SEE YOU POST I TRY THIS CODES BEFORE TRYING WITH YOUR CODES
Lets see how quick and easy this really is...
In the command line type:
Code:
fastboot devices
Seeing your serial number means we know all is good
Now lets type these commands:
Code:
fastboot erase system -w
fastboot erase boot
fastboot update superawesomerom.zip
Of course replace <superawesomerom.zip> with the correct file name
and last but not least:
Code:
fastboot reboot
THANKS IT WORKS BUT WHEN I GO TO RECOVERY IT GO TO BOOT directly again AND again
WHATS BROBLEAM !
meroher said:
Quote:
FIRST WHEN SEE YOU POST I TRY THIS CODES BEFORE TRYING WITH YOUR CODES
Lets see how quick and easy this really is...
In the command line type:
Code:
fastboot devices
Seeing your serial number means we know all is good
Now lets type these commands:
Code:
fastboot erase system -w
fastboot erase boot
fastboot update superawesomerom.zip
Of course replace <superawesomerom.zip> with the correct file name
and last but not least:
Code:
fastboot reboot
THANKS IT WORKS BUT WHEN I GO TO RECOVERY IT GO TO BOOT directly again AND again
WHATS BROBLEAM !
Click to expand...
Click to collapse
WOW
WTF
Idon't know who told you to use those commands, but I am not familiar with using
Code:
fastboot erase system -w
fastboot erase boot
fastboot update superawesomerom.zip
so i dont know what to tell you.
why do you say "it worked" but then say it "just boots again AND again"
to me that is not worked, that is mean it made bootloop. so not worked.
mrmazak said:
WOW
WTF
Idon't know who told you to use those commands, but I am not familiar with using
Code:
fastboot erase system -w
fastboot erase boot
fastboot update superawesomerom.zip
so i dont know what to tell you.
why do you say "it worked" but then say it "just boots again AND again"
to me that is not worked, that is mean it made bootloop. so not worked.
Click to expand...
Click to collapse
ok sorry
the mobile now in a bootloop as you say any solution to this issue and iam sorry again >>+
i get codes from here
https://forum.xda-developers.com/showpost.php?p=41374686&postcount=4
this post please stay with me to back up this phone
meroher said:
ok sorry
the mobile now in a bootloop as you say any solution to this issue and iam sorry again >>+
i get codes from here
https://forum.xda-developers.com/showpost.php?p=41374686&postcount=4
this post please stay with me to back up this phone
Click to expand...
Click to collapse
I am not aware of any zip file available to flash the way that guide had you try.
As it stands you wiped boot and system.
I am away from PC so typing is not as easy. I will be more detailed when I return.
Basically I suggest you to "flash" the boot.img I sent.
Then "boot" the recovery.
If the recovery then boots. Install a rom from my modifes stock roms thread.
oki i try install recovery but it same thing it go to white screen and restart again and again
i will wait for you to help me more thanks ><
mrmazak said:
I am not aware of any zip file available to flash the way that guide had you try.
As it stands you wiped boot and system.
I am away from PC so typing is not as easy. I will be more detailed when I return.
Basically I suggest you to "flash" the boot.img I sent.
Then "boot" the recovery.
If the recovery then boots. Install a rom from my modifes stock roms thread.
Click to expand...
Click to collapse
oki i will wait you thanks for your time
meroher said:
oki i will wait you thanks for your time
Click to expand...
Click to collapse
So this is what i suggest
use the files i gave before, unzipped to desktop.
This one to Flash boot.img
Code:
fastboot flash boot %userprofile%\Desktop\su-boot.img
This one to boot twrp.img
Code:
fastboot boot %userprofile%\Desktop\twrp_p6601_7.1_recovery.img
I expect that to give you a working twrp environment. Then go to linked thread and install really any version you want. But as you said you were on V21, so pick that one I supose.
https://forum.xda-developers.com/r1-hd/development/modified-8-3-stock-rom-t3602672
mrmazak said:
So this is what i suggest
use the files i gave before, unzipped to desktop.
This one to Flash boot.img
Code:
fastboot flash boot %userprofile%\Desktop\su-boot.img
This one to boot twrp.img
Code:
fastboot boot %userprofile%\Desktop\twrp_p6601_7.1_recovery.img
I expect that to give you a working twrp environment. Then go to linked thread and install really any version you want. But as you said you were on V21, so pick that one I supose.
https://forum.xda-developers.com/r1-hd/development/modified-8-3-stock-rom-t3602672
Click to expand...
Click to collapse
it works fine finally thanks very much for help :]:]:laugh::laugh:
Can anyone tell me what this (remote: Flashing is not allowed in Lock State).
What exactly is locked? Is my cell OEM unlocked?
I flashed the wrong TWRP (for the 2017 Red Magic-NX209J) and even though I have been able to unlock my cell via CMD commands; it remains permanently in fastboot mode?
If I send a CMD command to reboot it reboots straight back to fastboot mode.
No form of ADB connect seems to work an my windows PC cannot see/show the cell?
How the hell do I fix this? It's been in this state for a week.
Can anyone help?
Meaby try this?
Then, to unlock your bootloader, enter "fastboot oem nubia_unlock NUBIA_NX629J"
And meaby try the recovery backup instead of TWRP.
xronaldx said:
Meaby try this?
Then, to unlock your bootloader, enter "fastboot oem nubia_unlock NUBIA_NX629J"
And meaby try the recovery backup instead of TWRP.
Click to expand...
Click to collapse
Thanks for the suggestion. I have no recovery back up Is it possible to get past TWRP being locked and use CMD to flash the International or chinese ROM? Or recovery image?
Unless tools are developed to unbrick this device I am scared this problem might be permanent
Download this twrp, and then upload it to google drive or something so the rest of us can download it too .
Password is: 6i3i
https://pan.baidu.com/s/1ZdMPjm2fEwt...06770439204444
Secretcow said:
Download this twrp, and then upload it to google drive or something so the rest of us can download it too .
Password is: 6i3i
https://pan.baidu.com/s/1ZdMPjm2fEwt...06770439204444
Click to expand...
Click to collapse
Thanks but what do i do with it? Its all in an asain language?
Link not open bro
The TWRP does not work
Sorry. That link to the twrp does not result in a bootable twrp recovery for me.
I am starting to think my cell is not fixable.
I did not do that much wrong I just flashed the twrp for 2 models of red magic earlier. It only has a fastboot mode. I either get a boot screen then fastboot mode or a warning about the bootloader being unlocked.
Whatever is wrong with my cell prevents ADB connect an the cell is not able to be seen by windows.
This $1100 New Zealand dollar cellphone may be permanently bricked by my mistake.
I might just need to bin it an buy another one.
Lesson learned.
It confusing....
My cell acts like it has a softbrick (can turn off an on an has fastboot options and I have erased it an OEm an bootloader unlocked it)
And also behaves like a hard brick (resists every method of repair).
I just do not understand it or Nubia products. I am unfamiliar with this phone.
Does anyone have any clue how I can see this cell on my windows pc or ADB connect it an boot into TWRP?
Are there any Nubia repair software tools?
I already share nubia red magic 3 twrp check my all post
sandeepkhatri said:
I already share nubia red magic 3 twrp check my all post
Click to expand...
Click to collapse
Thanks for that. I'm talking about using CMD to totally wipe everything in the cell an reflash the Chinese ROM that came with it. Repair software. Might take months to develop software like that.
sandeepkhatri said:
I already share nubia red magic 3 twrp check my all post
Click to expand...
Click to collapse
Also it isn't a zip. It's some other kind of file. And does not boot into TWRP on my unit
So are you able to unlock your bootloader in its current state?
If you have an older TWRP installed maybe try changing the model on your bootloader command to match it:
fastboot oem nubia_unlock NUBIA_NX209J
If this works then flash the correct TWRP and the boot IMG from your original rom
fastboot flash recovery <new recovery>
fastboot reboot bootloader
Sent from my NX629J using Tapatalk
terrapin4 said:
So are you able to unlock your bootloader in its current state?
If you have an older TWRP installed maybe try changing the model on your bootloader command to match it:
fastboot oem nubia_unlock NUBIA_NX209J
If this works then flash the correct TWRP and the boot IMG from your original rom
fastboot flash recovery <new recovery>
fastboot reboot bootloader
Click to expand...
Click to collapse
Terrapin. Absolutely nothing worked. I am the 3rd person who has had this issue I know of. 2 other xda members had the same issue. One with TWRP like me an the other got stuck in fastboot mode after trying g to flash an apk of Gapps? I think these cells do not like tinkering. But your advice enabled me to be OEM and bootloader unlocked. But always.....straight back to fastboot mode no matter what I flash? My red magic 3 device is currently at a service center with a technician trying to solve the problem. I have 3 repayments left on my Xiaomi Mi9 that has zero flashing issues. O admit i.may be ignorant of the ways of Nubia ?
I did it
I extracted the file system.img
this is what I did ....
starting from the Chinese ROM http://ui.nubia.cn/rom/detail/62
Download download necessary files https://drive.google.com/drive/folders/16in6Jnyi4s5aIIuQwapQ1KK1LjysSfYm?usp=sharing
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot reboot
enter recovery, use a FAT32 pendrive format, add Chinese ROM, rename it (update.zip) to OTG flash.
Everything works again.
good luck.
emmegitony said:
I did it
I extracted the file system.img
this is what I did ....
starting from the Chinese ROM http://ui.nubia.cn/rom/detail/62
Download download necessary files https://drive.google.com/drive/folders/16in6Jnyi4s5aIIuQwapQ1KK1LjysSfYm?usp=sharing
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot reboot
enter recovery, use a FAT32 pendrive format, add Chinese ROM, rename it (update.zip) to OTG flash.
Everything works again.
good luck.
Click to expand...
Click to collapse
Thank God. Maybe the Chinese service guy I'm paying will get on xda an try your idea. I'm being lazy saying that lol. Thanks very very much. I will show your post to the service guy who has my red magic 3 or try it myself.
There's no way your a junior member working all this out. I'm a junior member listed as a senior member who makes rookie flashing errors with Chinese cellphones lol.
I will share if I can implement your ideas successfully. Thanks buddy my missus really loved this phone I felt really bad when I incapacitated it.
Fingers crossed.....
I have no idea how did you managed to flash the system.img
C:\adb>fastboot flash system system.img
target reported max download size of 805306368 bytes
Invalid sparse file format at header magi
LE: After this error, somehow it manages to continue and flash all partitions of the system, but after above tutorial, the phone still reboots in fastboot mode and cannot access recovery
The solution is here:
https://forum.xda-developers.com/re...tboot-mode-t3937527/post79715050#post79715050
sakilxda said:
The solution is here:
https://forum.xda-developers.com/re...tboot-mode-t3937527/post79715050#post79715050
Click to expand...
Click to collapse
Thanks for the help. I do not understand some of the commands an cannot seem to get them right? And I do not understand why the instructions say to cmd flash the image (IMG) via command prompt (which just errors like the strange NON-HLOS command?) Then the instructions say to flash the Chinese rom via otg?
Are you supposed to flash the ROM twice?
Can someone please give me some more detailed instructions as this cell has been non functional about 2 months now.
Planning to fix it an give it to my partner
Bryceicle1971 said:
Thanks for the help. I do not understand some of the commands an cannot seem to get them right? And I do not understand why the instructions say to cmd flash the image (IMG) via command prompt (which just errors like the strange NON-HLOS command?) Then the instructions say to flash the Chinese rom via otg?
Are you supposed to flash the ROM twice?
Can someone please give me some more detailed instructions as this cell has been non functional about 2 months now.
Planning to fix it an give it to my partner
Click to expand...
Click to collapse
Hane you fixed the phone or not?
JerryYin said:
Hane you fixed the phone or not?
Click to expand...
Click to collapse
No still not working. Might try again when I have spare time. Very hard cellphone to fix
Bryceicle1971 said:
No still not working. Might try again when I have spare time. Very hard cellphone to fix
Click to expand...
Click to collapse
My suggestions is, download a full sd card update package, unlock the bootloader temporarily,extract the update file and flash the vbmeta.img to vbmeta partion, then flash the recovery.img to recovery partition, after that, try to boot into recovery through bootloader. You have to make sure that you use all the same file from same package, if you are use a low version vbmeta file to boot a high version system (or recovery ) it will not boot. the vbmeta is very important on this phone.
Can't even fastboot flash boot recovery system...and thats all folks...waste of money.
Failed attempt to unlock the bootloader and instal TWRP ?
Hi guys, visit this link. We had similar problems and we could solved that.
Read all and you would get the solution
https://forum.xda-developers.com/red-magic-3/help/stuck-fastboot-mode-t3937527/page9
roadworker said:
Failed attempt to unlock the bootloader and instal TWRP ?
Click to expand...
Click to collapse
No I installed Chinese v2.27.... Well it's absolute mess like I never seen Android before. Then attempted to flash global again, problems to the point of corruption. I have fastboot flashed all key elements of working Android phone multiple times. Can only get to fastboot after boot screen that I have to do manually. Recovery system is toast.... Guess it's back to Poco F1.... Learned my lesson from junk.
Just flash the ROM again..It will be back lm
mhex said:
Just flash the ROM again..It will be back lm
Click to expand...
Click to collapse
Trying to NA Global original rom, problem is no recovery at all....I can only flash within fastboot.....which is not a problem, but phone is not taking it flashing all images individually and modem. And I know it's flashing cause fastboot is saying okay and bootloader showing unlocked
SuperDroidMe said:
Trying to NA Global original rom, problem is no recovery at all....I can only flash within fastboot.....which is not a problem, but phone is not taking it flashing all images individually and modem. And I know it's flashing cause fastboot is saying okay and bootloader showing unlocked
Click to expand...
Click to collapse
Every time you restart back to the bootloader you need to do: "fastboot oem nubia_unlock NUBIA_NX629J" first
SuperDroidMe said:
No I installed Chinese v2.27.... Well it's absolute mess like I never seen Android before. Then attempted to flash global again, problems to the point of corruption. I have fastboot flashed all key elements of working Android phone multiple times. Can only get to fastboot after boot screen that I have to do manually. Recovery system is toast.... Guess it's back to Poco F1.... Learned my lesson from junk.
Click to expand...
Click to collapse
So YOU mess up your phone by trying to flash sh!t and you blame the MANUFACTURER? Yeah ok. Lmao. Enjoy the new paperweight that YOU CREATED.
xphyle1971 said:
So YOU mess up your phone by trying to flash sh!t and you blame the MANUFACTURER? Yeah ok. Lmao. Enjoy the new paperweight that YOU CREATED.
Click to expand...
Click to collapse
LMAO if you can't go from stock global to stock Chinese and reverse from the manufacturer with their recovery, you haven't got a prayer for custom roms or mods.
SuperDroidMe said:
LMAO if you can't go from stock global to stock Chinese and reverse from the manufacturer with their recovery, you haven't got a prayer for custom roms or mods.
Click to expand...
Click to collapse
if you stuck in the Device is corrupt. It can't be trusted and will not boot and you are in the Chinese or global rom then flash the stock boot image via adb. well I am using a Chinese v2.27 rom with rooted +gapps and then realized that most of the google apps wont work correctly because of the unlocked bootloader. I tried to lock the bootloader via adb then the message "Device is corrupt. It can't be trusted and will not boot" show up. so I try to use adb to flash the stock boot image then it work. first place the stock boot image to the "Minimal ADB and Fastboot" folder which located in the local drive under program file(x86) then run the command
fastboot flash boot boot.img
fastboot reboot
mswl04 said:
if you stuck in the Device is corrupt. It can't be trusted and will not boot and you are in the Chinese or global rom then flash the stock boot image via adb. well I am using a Chinese v2.27 rom with rooted +gapps and then realized that most of the google apps wont work correctly because of the unlocked bootloader. I tried to lock the bootloader via adb then the message "Device is corrupt. It can't be trusted and will not boot" show up. so I try to use adb to flash the stock boot image then it work. first place the stock boot image to the "Minimal ADB and Fastboot" folder which located in the local drive under program file(x86) then run the command
fastboot flash boot boot.img
fastboot reboot
Click to expand...
Click to collapse
Bud I put so much effort in last 13 hours to no avail....fastboot erased all partitions, reformatted, reflashed to no avail. Right now it just boots loops on Chinese 2.27 boot splash, I do have Chinese recovery though, but the same otg adapter and pen drive that works on 5 different devices, this damn phone won't read it so even that is out of the question. I wipe my hands clean of it, some things just best to put a bullet through it.
SuperDroidMe said:
Bud I put so much effort in last 13 hours to no avail....fastboot erased all partitions, reformatted, reflashed to no avail. Right now it just boots loops on Chinese 2.27 boot splash, I do have Chinese recovery though, but the same otg adapter and pen drive that works on 5 different devices, this damn phone won't read it so even that is out of the question. I wipe my hands clean of it, some things just best to put a bullet through it.
Click to expand...
Click to collapse
btw did you rooted the phone?
mswl04 said:
btw did you rooted the phone?
Click to expand...
Click to collapse
No BS, all I did was flash CN 2.27 over NA Global, after a look at the mess it was I proceeded to flash NA Global back.....no TWRP No Root with SuperSU or Magisk. But in fastboot it does say Root=1, so I guess the CN 2.27 rooted it by default cause I sure as hell didn't. One thing that is bothering me while in fastboot unlock bootloader I can't turn Secure Boot off which I believe is why it won't boot system.
SuperDroidMe said:
No BS, all I did was flash CN 2.27 over NA Global, after a look at the mess it was I proceeded to flash NA Global back.....no TWRP No Root with SuperSU or Magisk. But in fastboot it does say Root=1, so I guess the CN 2.27 rooted it by default cause I sure as hell didn't. One thing that is bothering me while in fastboot unlock bootloader I can't turn Secure Boot off which I believe is why it won't boot system.
Click to expand...
Click to collapse
don't give up I know how do you feel did you download this update from the official red magic website http://ui.nubia.cn/rom/detail/62 after you download the update and it will be in a zip file extract the boot image. then try to follow the root guild https://forum.xda-developers.com/red-magic-3/how-to/red-magic-3-root-guide-t3933148 in the website download the adb and then run the command which I reply earlier
seem to me it is like a soft brick
mswl04 said:
don't give up I know how do you feel did you download this update from the official red magic website http://ui.nubia.cn/rom/detail/62 after you download the update and it will be in a zip file extract the boot image. then try to follow the root guild https://forum.xda-developers.com/red-magic-3/how-to/red-magic-3-root-guide-t3933148 in the website download the adb and then run the command which I reply earlier
seem to me it is like a soft brick
Click to expand...
Click to collapse
I got CN version 2.27 images, am I supposed to be using one of the other versions off the official site?
SuperDroidMe said:
I got CN version 2.27 images, am I supposed to be using one of the other versions off the official site?
Click to expand...
Click to collapse
all you need to do is to fix the corrupt image so later once you finish the first step of booting to the phone then you can flash to global rom. if you have the cn version 2.27 boot.img then you can download the adb and use the command to fix the phone
Shouldn't have messed with something that wasn't broken. Now you have a nice brick to use as a paperweight. Hope you get it fixed tho. Good luck.
Solved Instructions:
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot flash dsp dspso.bin
fastboot oem nubia_lock NUBIA_NX629J
fastboot reboot
*****as soon as boot screen appears hold volume + button, now in recovery...navigate to wipe data and then wipe cache....then plug in otg usb pen drive (formatted FAT32) with Rom package .zip....navigate to update otg in recovery select it let it do its thing and walla your phone is fixed.
*****if you ever go from CN rom to Global rom you must Wipe Data and Cache through recovery, it is not enough to do it in fastboot and your device will remain soft bricked.
SuperDroidMe said:
Solved Instructions:
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot flash dsp dspso.bin
fastboot oem nubia_lock NUBIA_NX629J
fastboot reboot
*****as soon as boot screen appears hold volume + button, now in recovery...navigate to wipe data and then wipe cache....then plug in otg usb pen drive (formatted FAT32) with Rom package .zip....navigate to update otg in recovery select it let it do its thing and walla your phone is fixed.
*****if you ever go from CN rom to Global rom you must Wipe Data and Cache through recovery, it is not enough to do it in fastboot and your device will remain soft bricked.
Click to expand...
Click to collapse
Congrat you finally fix it
Hows your phone?..Did it work.
Hello guys no matter what i flash the twrp even its success i cant boot to twrp i followed many instructions but the same i cant boot to twrp some one help please
Arrenlaxmali said:
Hello guys no matter what i flash the twrp even its success i cant boot to twrp i followed many instructions but the same i cant boot to twrp some one help please
Click to expand...
Click to collapse
Can you share us a screenshot when we can see what are you doing to install TWRP recovery?
sakilxda said:
Can you share us a screenshot when we can see what are you doing to install TWRP recovery?
Click to expand...
Click to collapse
Yow hello bro as always you are active helper . I did thisfastboot oem nubia_unlock NUBIA_NX629J
Then fast boot flash recovery recovery.img " i rename the twrp with recovery.img and i cant boot to twrp why im confused i follow the instructions here in xda
Arrenlaxmali said:
Yow hello bro as always you are active helper . I did thisfastboot oem nubia_unlock NUBIA_NX629J
Then fast boot flash recovery recovery.img " i rename the twrp with recovery.img and i cant boot to twrp why im confused i follow the instructions here in xda
Click to expand...
Click to collapse
its for chines version only
if you have Chinese version you have to unlock the bootloader first and then you will be able to flash the twrp recovery
unlocking the bootloader should be on the setting
you cant unlock the bootloader using the oem command in fastboot , you have to unlock it from the setting in developer option
and then enter fastboot and enter the command
fastbooot flashing unlock
remember unlocking the bootloader will erase all your data
em90256 said:
its for chines version only
if you have Chinese version you have to unlock the bootloader first and then you will be able to flash the twrp recovery
unlocking the bootloader should be on the setting
you cant unlock the bootloader using the oem command in fastboot , you have to unlock it from the setting in developer option
and then enter fastboot and enter the command
fastbooot flashing unlock
remember unlocking the bootloader will erase all your data
Click to expand...
Click to collapse
It was unlock bro still i cant enter twrp my rm3 version is 2.27
Arrenlaxmali said:
It was unlock bro still i cant enter twrp my rm3 version is 2.27
Click to expand...
Click to collapse
am in version 2.27 and twrp working fine with me
you have to enter the command
fastboot flashing unlock
and when you boot there is a yellow warning message showing that you have unlocked the bootloader
after that just flash the right twrp file posted on the fourm
good luck
em90256 said:
am in version 2.27 and twrp working fine with me
you have to enter the command
fastboot flashing unlock
and when you boot there is a yellow warning message showing that you have unlocked the bootloader
after that just flash the right twrp file posted on the fourm
good luck
Click to expand...
Click to collapse
I did but look it was success but i cant boot to twrp
Arrenlaxmali said:
I did but look it was success but i cant boot to twrp
Click to expand...
Click to collapse
you doing it wrong, please copy my commands ,
first you have to unclock oem in developer option under settings this is important and then please copy this
fastboot devices
fastboot flashing unlock
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash recovery recovery.img
in your photo you have only used this command
fastboot oem nubia_unlock NUBIA_NX629J
but this is wrong
you have to use
*
fastboot flashing unlock
*
this is important
and then you will be able to flash twrp recovery
em90256 said:
you doing it wrong, please copy my commands ,
first you have to unclock oem in developer option under settings this is important and then please copy this
fastboot devices
fastboot flashing unlock
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash recovery recovery.img
in your photo you have only used this command
fastboot oem nubia_unlock NUBIA_NX629J
but this is wrong
you have to use
*
fastboot flashing unlock
*
this is important
and then you will be able to flash twrp recovery
Click to expand...
Click to collapse
I did all of this but still the same why i dont understand. When i reboot to recovery its show just a fastboot mode why
Arrenlaxmali said:
I did all of this but still the same why i dont understand. When i reboot to recovery its show just a fastboot mode why
Click to expand...
Click to collapse
You can find the solutions here.
https://forum.xda-developers.com/red-magic-3/help/stuck-fastboot-mode-t3937527/page7
sakilxda said:
You can find the solutions here.
https://forum.xda-developers.com/red-magic-3/help/stuck-fastboot-mode-t3937527/page7
Click to expand...
Click to collapse
I mean i can boot to system but i cant boot to recovery to twrp
Arrenlaxmali said:
I mean i can boot to system but i cant boot to recovery to twrp
Click to expand...
Click to collapse
Twrp recovery is only for Chinese firmware, did you know?
What's your problem exactly? What do you want to do?
sakilxda said:
Twrp recovery is only for Chinese firmware, did you know?
What's your problem exactly? What do you want to do?
Click to expand...
Click to collapse
Since i csnt update using OTA. I want to flash twrp so i can flash cn roms or global, yes i am cn firmware. i dont understand why i cant update in OTA and flash twrp. Look at the photo failt ota and successful twrp flash but i still i cant boot to twrp
Bro, step by step...
First, lock again the bootloader.
Second, unlock bootloader again.
Third, flash the archives from Europe or Chinese ROM, all the from the same firmware. (Boot, recovery, system, parameters, etc...)
You can see that in the other link.
If you get do all ok, try flash with OTG since Recovery.
sakilxda said:
Bro, step by step...
First, lock again the bootloader.
Second, unlock bootloader again.
Third, flash the archives from Europe or Chinese ROM, all the from the same firmware. (Boot, recovery, system, parameters, etc...)
You can see that in the other link.
If you get do all ok, try flash with OTG since Recovery.
Click to expand...
Click to collapse
Okay bro thanks i will do it
Arrenlaxmali said:
Okay bro thanks i will do it
Click to expand...
Click to collapse
Did you succes?
I have a problem with twrp to, after finish with all step twrp shown once after boot then when I try to reboot twice twrp gone.
Arrenlaxmali said:
Okay bro thanks i will do it
Click to expand...
Click to collapse
Did it work? I have the same problem with my global version.
I use to bootloader unlock and try to oem lock then just pop up logo and black screen and reboot to logo and same as bootloop... only works recovery mode and edl mode. How can i fix it?... this is my main device so reallly need help now.. pls help
ParaNoMal said:
I use to bootloader unlock and try to oem lock then just pop up logo and black screen and reboot to logo and same as bootloop... only works recovery mode and edl mode. How can i fix it?... this is my main device so reallly need help now.. pls help
Click to expand...
Click to collapse
Hi,try wipe data in recovery.
How you unlock bootloader, command?
When you in recovery try adb command, fastboot reboot bootloader.
Firmware Color A0...?
VovaHouse said:
Hi,try wipe data in recovery.
How you unlock bootloader, command?
When you in recovery try adb command, fastboot reboot bootloader.
Firmware Color A0...?
Click to expand...
Click to collapse
a09 and fastboot flashing unlock
ParaNoMal said:
a09 and fastboot flashing unlock
Click to expand...
Click to collapse
Wipe data?
VovaHouse said:
Wipe data
Try flash stok boot.img, vendor-boot.img and vbmeta.img
Click to expand...
Click to collapse
File folder on MEGA
mega.nz
VovaHouse said:
File folder on MEGA
mega.nz
Click to expand...
Click to collapse
i cant boot fastboot... so sad
VovaHouse said:
File folder on MEGA
mega.nz
Click to expand...
Click to collapse
can you get the patched a.12 boot?
Jeff88malaquias said:
can you get the patched a.12 boot?
Click to expand...
Click to collapse