Database Develop

[TOOL] 6T MsmDownloadTool V4.0 (HOS 9.0.4)

This tool can be used to revive a bricked OP6T China variants and remove the 'Device is corrupt' error message on boot.
Same with international version but this will bring back the China variants to Hydrogen OS v9.0.4. This was taken from Oneplus China forum.
Contains the latest MsmDownloadTool v4.0.58 and Hydrogen OS v9.0.4 and is not compatible with T-mobile models and also I didn't tested with International models(This may work so Proceed at Your Own Risk)
Make sure that your phone is switched off.
Open device manager on your Windows PC.
Press and hold the Volume Up & Volume Down buttons then connect to your PC using your data cable.
Once the device is connected to your Windows PC, check if the phone is being recognized (Other > QUSB_BULK or Ports > Qualcomm).
If showing as Other > QUSB_BULK either wait for Windows to install the Qualcomm driver or download the driver below and install.
Run MsmDownloadTool V4.0_factory.exe and click Start.
NOTE: This will completely wipe your device and re-lock your bootloader.
Downloads
MsmDownloadTool: DELETED
Driver: DELETED

If anyone uses this, can you make a full device dump please? Wanna mess with the OS, see what its like.

Is it confirmed not working on T-Mobile variant? I like h20s on my 6, wouldn’t mind it in my 6t.

strictlyphat said:
Is it confirmed not working on T-Mobile variant? I like h20s on my 6, wouldn’t mind it in my 6t.
Click to expand...
Click to collapse
It’s basically a different OS variant for the global 6T as they can switch between either OS without issue, since the global OOS MSMDOWNLOADTOOL won’t work with the T-Mobile variant, this definitely won’t.

Dark Nightmare said:
If anyone uses this, can you make a full device dump please? Wanna mess with the OS, see what its like.
Click to expand...
Click to collapse
This could work on International Version but won't tested, same as Oneplus 6 before. I wanna do it for you but seem have no time
strictlyphat said:
Is it confirmed not working on T-Mobile variant? I like h20s on my 6, wouldn’t mind it in my 6t.
Click to expand...
Click to collapse
Sure, it will not work on T-Mobile variant, even International version

Anybody tested this tool on A6013 international? Does it work?
Sent from my ONEPLUS 6T using Tapatalk

anyone try to use this tool to flash to hydrogen from oxygen on international?
EDIT, i took the plunge because i want to rid myself of google. i installed fdroid and this tool and rom are working great for those interested

Dark Nightmare said:
It’s basically a different OS variant for the global 6T as they can switch between either OS without issue, since the global OOS MSMDOWNLOADTOOL won’t work with the T-Mobile variant, this definitely won’t.
Click to expand...
Click to collapse
What about the modded msmdownloadtool that they use to flash the T-Mobile 6t to global without unlocked bootloader
This is the tool in talking about
https://forum.xda-developers.com/oneplus-6t/how-to/t-mobile-6t-to-international-t3888307

Here you go I installed this on my 6t with no issues at all its the international version I don't have the T-Mobile version and I still get updates and all and yes play store works fine..
edit: i unlocked the bootloader as well no issues will report back once ive rooted
edit 2: i was able to update to 9.0.11 perfectly fine with no issues and ive rooted without problems as well

Question 1: If I've got the Chinese OnePLus 6T that originally came with HOS, and I bricked it, can is use the MSM tool with OOS when I restore?
Question 2: The files in the original post on this thread are no longer available --is there a Hydrogen OS MSM tool for the OnePlus 6T floating around now, in 2021?
Any help you can offer would be sincerely appreciated --had the phone for a single day before I muddled it up.

ghoster76 said:
This tool can be used to revive a bricked OP6T China variants and remove the 'Device is corrupt' error message on boot.
Same with international version but this will bring back the China variants to Hydrogen OS v9.0.4. This was taken from Oneplus China forum.
Contains the latest MsmDownloadTool v4.0.58 and Hydrogen OS v9.0.4 and is not compatible with T-mobile models and also I didn't tested with International models(This may work so Proceed at Your Own Risk)
Make sure that your phone is switched off.
Open device manager on your Windows PC.
Press and hold the Volume Up & Volume Down buttons then connect to your PC using your data cable.
Once the device is connected to your Windows PC, check if the phone is being recognized (Other > QUSB_BULK or Ports > Qualcomm).
If showing as Other > QUSB_BULK either wait for Windows to install the Qualcomm driver or download the driver below and install.
Run MsmDownloadTool V4.0_factory.exe and click Start.
NOTE: This will completely wipe your device and re-lock your bootloader.
Downloads
MsmDownloadTool: [url]https://drive.google.com/open?id=1FCTK748dkMhHAC6CriNKgDeDbXFbmHrZ[/URL]
Driver: [url]https://drive.google.com/open?id=1Y5LHVIjzLhxMLIS4dTTm5BGiEfff6cqK[/URL]
Click to expand...
Click to collapse
Can you repost the link bro. To download
https://drive.google.com/open?id=1FCTK748dkMhHAC6CriNKgDeDbXFbmHrZ

Can anybody repost a working link to the hydrogen os file.

Anyone there bro

[OP7PRO][LATEST OOS 11.0.5.1 GM21AA/GM21BA] Collection of unbrick tools

Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been modified before it was cool.
Hi everyone, similar to the previous threads for
OP3, OP3T, OP5, OP5T, OP6, OP6T and OP7, here are the EDL packages (also known as MSM tool or unbrick tool) that can revive a bricked OnePlus 7 Pro.
They can also be used to rollback your phone to a previous release of OOS.
GM1910, GM1911, GM1913 and GM1917 models are supported.
Here are the files uploaded on AndroidFileHost ordered by Android version and firmware your device will be restored to:
GM21AA tools (international firmware):
ANDROID 9:
OOS 9.5.3 (credits @Lucifer6 )
OOS 9.5.7
OOS 9.5.10
OOS 9.5.11
OOS 9.5.13
ANDROID 10:
OOS 10.0.2
OOS 10.0.3
OOS 10.3.0
OOS 10.3.1
OOS 10.3.2
OOS 10.3.5
OOS 10.3.6
OOS 10.3.7
OOS 10.3.8
ANDROID 11:
OOS 11.0.5.1
Mirror for first and last MSMs per Android version: https://onepluscommunityserver.com/
GM21BA tools (european firmware):
ANDROID 9:
OOS 9.5.3 (credits @MrVoshel )
OOS 9.5.10
OOS 9.5.11
ANDROID 10:
OOS 10.0.2
OOS 10.0.3
OOS 10.0.4
OOS 10.0.5
OOS 10.0.8
OOS 10.0.9
OOS 10.0.10
ANDROID 11:
OOS 11.0.5.1
Mirror for first and last MSMs per Android version: https://onepluscommunityserver.com/
Instructions:
Power your device off
Maintain volume up and volume down keys to get into Qualcomm EDL mode.
Launch MsmDownloadTool V4.0.exe.
Click on Enum to be sure your device is detected and press Start.
Wait ~300 seconds
Enjoy your brand new device
FAQ:
My device isn't detected when I click on "Enum" button
Go to device manager and make sure your phone shows up as QDLOADER 9008.
If it shows up as QHUSB_BULK, it means Qualcomm driver wasn't installed automatically by Windows Update. Download the latest one from Microsoft website at http://download.windowsupdate.com/c..._fba473728483260906ba044af3c063e309e6259d.cab (source https://www.catalog.update.microsof...updateid=8ee52ba0-bdef-4009-88cf-335a678dd67a ) and install it manually by right clicking on QHUSB_BULK and selecting "Update driver software" and "Browse my computer for driver software" to where you downloaded CAB file.
My device doesn't stay in EDL mode for more than 10 seconds
Some units can have this problem and there isn't a lot of things to do to fix that, except being fast after plugging your phone to your computer.
There is however apparently a "one-off" solution to this problem available at https://forum.xda-developers.com/showpost.php?p=80021106&postcount=21 . I would like to investigate more on that but sadly don't own the device so can't confirm it.
MSM tool is stuck on "Param pre-processing"
Ensure you're using the Qualcomm drivers linked in first part of this FAQ.
What is SMT Download mode?
Just don't try to unlock that mode, it will wipe your IMEI and your Widevine certificate if you use it.
Additional credits:
@Titokhan for inspiration in writing
@headsh0t95 for suggesting me to request an access to upload files on AndroidFileHost a few months ago for my previous threads
@AndroidFileHost for the hosting
OnePlus for the device and OS

Reserved

Reserved

Reserved

Some_Random_Username, first Thank you very much!
It needs this ?
1) Open Command Prompt (CMD) as administrator and input the following commands:
"bcdedit.exe -set loadoptions DISABLE_INTEGRITY_CHECKS" then "bcdedit.exe -set TESTSIGNING ON"
(don't forget to flip those back to ENABLE and OFF after you're done)
If yes, put it in instructions, so users don't ask you why windows pc don't instal Qualcom drivers .

It's passworded?

null0seven said:
Some_Random_Username, first Thank you very much!
It needs this ?
1) Open Command Prompt (CMD) as administrator and input the following commands:
"bcdedit.exe -set loadoptions DISABLE_INTEGRITY_CHECKS" then "bcdedit.exe -set TESTSIGNING ON"
(don't forget to flip those back to ENABLE and OFF after you're done)
If yes, put it in instructions, so users don't ask you why windows pc don't instal Qualcom drivers .
Click to expand...
Click to collapse
If you're getting an error about the drivers being unsigned then yes but, if you're using Windows 10, you can do the same thing by using the recovery reboot options.

null0seven said:
Some_Random_Username, first Thank you very much!
It needs this ?
1) Open Command Prompt (CMD) as administrator and input the following commands:
"bcdedit.exe -set loadoptions DISABLE_INTEGRITY_CHECKS" then "bcdedit.exe -set TESTSIGNING ON"
(don't forget to flip those back to ENABLE and OFF after you're done)
If yes, put it in instructions, so users don't ask you why windows pc don't instal Qualcom drivers .
Click to expand...
Click to collapse
The Qualcomm drivers published on Microsoft Update website are digitally signed so disabling driver signature enforcement and enabling Windows test mode shouldn't be needed to install them. Thanks though.
djsubterrain said:
It's passworded?
Click to expand...
Click to collapse
As stated in FAQ, I don't have passwords to open 9.5.10 and 9.5.11 GM21BA msm tools (which come from OnePlus support) but however do have the passwords for 9.5.10 and 9.5.11 GM21AA files (which I am the first one to share decrypted).
If you have some time and some hardware that allows it, don't hesitate to try to bruteforce so that users could eventually get decrypted versions of the BA tools.

Some_Random_Username said:
The Qualcomm drivers published on Microsoft Update website are digitally signed so disabling driver signature enforcement and enabling Windows test mode shouldn't be needed to install them. Thanks though.
Click to expand...
Click to collapse
Well, this it's Awesome ! A headache less! Thank you!
Download link for driver not working: "We can’t connect to the server at sysdev.microsoft.com"
i found this:
https://www.pcpitstop.com/libraries/driver/vendor.asp?vendor=Qualcomm~Incorporated.html
but i don't know wich one it's good..
---------- Post added at 01:20 PM ---------- Previous post was at 01:19 PM ----------
djsubterrain said:
If you're getting an error about the drivers being unsigned then yes but, if you're using Windows 10, you can do the same thing by using the recovery reboot options.
Click to expand...
Click to collapse
Yes, windows 10 x64.
Thank you.

wheres the firmware for the usa variant of the oneplus 7 pro? i refuse to root until i m able to a stable reflash....

raver445 said:
wheres the firmware for the usa variant of the oneplus 7 pro? i refuse to root until i m able to a stable reflash....
Click to expand...
Click to collapse
The unlocked version of OnePlus 7 Pro sold in USA runs GM21AA firmware out of the box.
You can find GM21AA unbrick tools in the first post.

Some_Random_Username said:
The unlocked version of OnePlus 7 Pro sold in USA runs GM21AA firmware out of the box.
You can find GM21AA unbrick tools in the first post.
Click to expand...
Click to collapse
oh thank you for telling me...i m new to the one plus community

null0seven said:
Well, this it's Awesome ! A headache less! Thank you!
Download link for driver not working: "We can’t connect to the server at sysdev.microsoft.com"
i found this:
https://www.pcpitstop.com/libraries/driver/vendor.asp?vendor=Qualcomm~Incorporated.html
but i don't know wich one it's good..
Click to expand...
Click to collapse
Hey, sorry for late answer, just noticed your edit, the direct download link is http://download.windowsupdate.com/c..._fba473728483260906ba044af3c063e309e6259d.cab (you can check if you wish at https://www.catalog.update.microsoft.com/Search.aspx?q=Qualcomm Incorporated - Ports - )

Some_Random_Username said:
Hey, sorry for late answer, just noticed your edit, the direct download link is http://download.windowsupdate.com/c..._fba473728483260906ba044af3c063e309e6259d.cab (you can check if you wish at https://www.catalog.update.microsoft.com/Search.aspx?q=Qualcomm Incorporated - Ports - )
Click to expand...
Click to collapse
Not a problem. We have lives, jobs, families... Thank you.:good:

Some_Random_Username said:
FAQ:
My device isn't detected when I click on "Enum" button
Go to device manager and make sure your phone shows up as QDLOADER 9008.
If it shows up as QHUSB_BULK, it means Qualcomm driver wasn't installed automatically by Windows Update.
Click to expand...
Click to collapse
Do you mean the device manager from the pc? If so, where exactly I can find my device, because I was looking at it, before I will try it with MSM. The reason i´m asking is, because I cannot find one of the above mentioned.

Bronco77 said:
Do you mean the device manager from the pc? If so, where exactly I can find my device, because I was looking at it, before I will try it with MSM. The reason i´m asking is, because I cannot find one of the above mentioned.
Click to expand...
Click to collapse
Yes. You can launch it by launching Run, entering
Code:
devmgmt.msc
and pressing Enter key.
QDLOADER 9008/QHUSB_BULK should be under COM ports section when your device is in EDL mode and plugged to your PC

GM21AA tools (international firmware):
ANDROID 9:
DECRYPTED OOS 9.5.11
DECRYPTED OOS 9.5.10
DECRYPTED OOS 9.5.3 (credits @Lucifer6 )
GM21BA tools (european firmware):
ANDROID 9:
ENCRYPTED OOS 9.5.11
ENCRYPTED OOS 9.5.10
DECRYPTED OOS 9.5.3 (credits @MrVoshel )
Could someone please tell me the passwords for the decrypted OOS? Perhaps there is a common ground on them and the pw restoring doesn´t last so long. I´ll try then to restore it for OOS 9.5.11.

Thank you!!
Finally I have the latest version of EDL..!!

What is the zip password?? Please

dajumper said:
What is the zip password?? Please
Click to expand...
Click to collapse
Please read second post

[OP7TPRO][OOS HD01AA | HD01BA] Unbrick tool to restore your device to OxygenOS

Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been modified before it was cool.
Hi everyone, similar to the previous threads for
OP3, OP3T, OP5, OP5T, OP6, OP6T, OP7, OP7PRO and OP7T here are the EDL packages (also known as MSM tool or unbrick tool) that can revive a bricked OnePlus 7T Pro.
They can also be used to rollback your phone to a previous release of OOS.
You can download the following versions:
HD01AA tools (International and indian firmware):
ANDROID 10:
10.0.3
10.0.4
10.0.5
10.0.7
10.0.8
10.0.11
10.0.12
10.0.13
10.0.14
ANDROID 11:
11.0.5.1
Mirror for first and last MSMs per Android version: https://onepluscommunityserver.com/
HD01BA tools (European firmware):
ANDROID 10:
10.0.3
10.0.4
10.0.5
10.0.7
10.0.8
10.0.9
10.0.11
10.0.13
ANDROID 11:
11.0.5.1
Mirror for first and last MSMs per Android version: https://onepluscommunityserver.com/
It should work with HD1910 (Chinese variant), HD1911 (Indian variant), HD1913 (EU variant) and HD 1917 (North America) models.
Instructions:
Power your device off
Maintain volume up and volume down keys to get into Qualcomm EDL mode.
Launch MsmDownloadTool V4.0.exe.
Click on Enum to be sure your device is detected and press Start.
Wait ~300 seconds
Enjoy your brand new device
FAQ:
I see a target button, what is that?
As you may (or may not!) be aware there are starting from 7T-Series build specifics to India.
If you use HD01AA tool, selecting "O2" as target should give you the global firmware while selecting "India" as target should give you the Indian one. See
https://imgur.com/2ipNyIy
for a screenshot.
If you use HD01BA tool, selecting "EU" should give you the EU firmware.
My device isn't detected when I click on "Enum" button
Go to device manager and make sure your phone shows up as QDLOADER 9008.
If it shows up as QHUSB_BULK, it means Qualcomm driver wasn't installed automatically by Windows Update. Download the latest one from Microsoft website at http://download.windowsupdate.com/c..._fba473728483260906ba044af3c063e309e6259d.cab (source https://www.catalog.update.microsof...updateid=8ee52ba0-bdef-4009-88cf-335a678dd67a ) and install it manually by right clicking on QHUSB_BULK and selecting "Update driver software" and "Browse my computer for driver software" to where you downloaded CAB file.
MSM tool is stuck on "Param pre-processing"
Ensure you're using the Qualcomm drivers linked in first part of this FAQ.
What is SMT Download mode?
Just don't try to unlock that mode, it will wipe your IMEI and your Widevine certificate if you use it.
How can I fix "SMT config not found" error?
Please refer to https://forum.xda-developers.com/showpost.php?p=83448961&postcount=61, all credits to @Shadow12347 for finding it out.
Credits:
@Miccia for sharing original link from OnePlus for 10.0.3 HD01AA tool and for sharing decrypted 10.0.3 HD01BA tool
@Titokhan for being a friend and providing inspiration in writing
@headsh0t95 for being a friend and suggesting me to request an access to upload files on AndroidFileHost now one year ago for my previous threads
@AndroidFileHost for the hosting
OnePlus for the device and OS
Related: Repo of OxygenOS builds.

Reserved

Reserved

Related: Repo of OxygenOS builds.

Thanks op I'm going to need this at some point ?

I've always loved the presence of EDL mode in OnePlus phones, if you like tinkering you always run the risk of a brick.
Thanks for releasing this, amazing work!

I waiting for Mclaren Edition
Oxygen OS 10.0.3 HD01BA

Neurom67 said:
I waiting for Mclaren Edition
Oxygen OS 10.0.3 HD01BA
Click to expand...
Click to collapse
Me too, let hope Mclarem tool pop up for EU version HD1913

Neurom67 said:
I waiting for Mclaren Edition
Oxygen OS 10.0.3 HD01BA
Click to expand...
Click to collapse
I believe the ROMs are the same, in which case this tool would also work on the Mclaren edition.

danieldmm said:
Me too, let hope Mclarem tool pop up for EU version HD1913
Click to expand...
Click to collapse
Hey Daniel. Good to see you here. Hope we will soon see your Tugapower ROMs for this device

Hi. Thank you for this tool. I'm not very familiar with this kind of stuff. I'm wondering. Can this be used as a ROM installation tool? I want to install OOS coming from HOS. But I cannt do a local update because the current HOS version is higher than OOS.

Neurom67 said:
I waiting for Mclaren Edition
Oxygen OS 10.0.3 HD01BA
Click to expand...
Click to collapse
danieldmm said:
Me too, let hope Mclarem tool pop up for EU version HD1913
Click to expand...
Click to collapse
As said in post #9, normally it should work with EU McLaren as well.
ZaryaMain said:
Hi. Thank you for this tool. I'm not very familiar with this kind of stuff. I'm wondering. Can this be used as a ROM installation tool? I want to install OOS coming from HOS. But I cannt do a local update because the current HOS version is higher than OOS.
Click to expand...
Click to collapse
Yes you can. Note that however it will wipe all data present on your device.

Some_Random_Username said:
As said in post #9, normally it should work with EU McLaren as well.
Yes you can. Note that however it will wipe all data present on your device.
Click to expand...
Click to collapse
Thank you. Thats fine. One more thing. Do I need to root the device? Or following your instruction on first post is sufficient.

ZaryaMain said:
Thank you. Thats fine. One more thing. Do I need to root the device? Or following your instruction on first post is sufficient.
Click to expand...
Click to collapse
Following instructions on first post is enough

Some_Random_Username said:
Following instructions on first post is enough
Click to expand...
Click to collapse
Do I need to select any specific mode in the EDL mode or just left it alone? I followed your instruction but nothing happened. status of connection is N/A and status of communication has been waiting for devices for long time.
---------- Post added at 05:48 AM ---------- Previous post was at 05:04 AM ----------
Some_Random_Username said:
Following instructions on first post is enough
Click to expand...
Click to collapse
I just realized that I got into fastboot mode instead of the edl mode. And hold volume up and down keys doesnt seem to work...
---------- Post added at 06:15 AM ---------- Previous post was at 05:48 AM ----------
ZaryaMain said:
Do I need to select any specific mode in the EDL mode or just left it alone? I followed your instruction but nothing happened. status of connection is N/A and status of communication has been waiting for devices for long time.
---------- Post added at 05:48 AM ---------- Previous post was at 05:04 AM ----------
I just realized that I got into fastboot mode instead of the edl mode. And hold volume up and down keys doesnt seem to work...
Click to expand...
Click to collapse
update: I got into edl via adb and switched from HOS to OOS. My phone is mclaren edition and it works the same. Everything is nice and smooth.
Thank you so much! @Some_Random_Username

Can I brush my device from HD1910 to HD1913 or something else?
Sorry My English!!!

Some_Random_Username said:
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been modified before it was cool.
Hi everyone, similar to the previous threads for
OP3, OP3T, OP5, OP5T, OP6, OP6T, OP7, OP7PRO and OP7T here is the EDL package (also known as MSM tool or unbrick tool) that can revive a bricked OnePlus 7T Pro.
It can also be used to rollback your phone to a previous release of OOS.
You can download it here: https://www.androidfilehost.com/?fid=4349826312261628475
It should work with HD1910 (Chinese variant), HD1911 (Indian variant), 1913 (EU variant) and HD 1917 (North America) models.
After use, your device will be restored to OOS 10.0.3.
Instructions:
Power your device off
Maintain volume up and volume down keys to get into Qualcomm EDL mode.
Launch MsmDownloadTool V4.0.exe.
Click on Enum to be sure your device is detected and press Start.
Wait ~300 seconds
Enjoy your brand new device
Click to expand...
Click to collapse
Hi thank you for the awesome work. I wanted to say what about when your device is bricked that the only function is an error message "Your device Is corrupt. It can't be trusted and will not boot.
When you have power button and volume down the screen goes black you think it powered off, you try to manually go into bootloader mode just to have the error message again and stays in a loop. There is no recognition on my PC except for a minute when you connect sound very rapidly it disconnects and then it's just dead except for the error loop.
My phone is brand new barely had barely a day and a half. Is there any fix for the phone it's an HD1910. Please help thank you.

slapman said:
Hi thank you for the awesome work. I wanted to say what about when your device is bricked that the only function is an error message "Your device Is corrupt. It can't be trusted and will not boot.
When you have power button and volume down the screen goes black you think it powered off, you try to manually go into bootloader mode just to have the error message again and stays in a loop. There is no recognition on my PC except for a minute when you connect sound very rapidly it disconnects and then it's just dead except for the error loop.
My phone is brand new barely had barely a day and a half. Is there any fix for the phone it's an HD1910. Please help thank you.
Click to expand...
Click to collapse
What about opening tool on your computer, maintaining power button to force your device to turn off, getting back into EDL, plug to your PC and press Start button on tool window as soon as possible?

Added HD01BA tool to go back to EU firmware, credit goes to @Miccia for sharing it

Hi. I am going to go from hydrogen ram to global oxygen ram. Can I use this method to do this? Because the Global Ram has not come yet

[OP7PRO 5G EU][OOS 9.5.11 GM27BA] Unbrick tool to restore your device to OxygenOS

Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been modified before it was cool.
Hi everyone, finally, almost one year after this device release date and similar to the previous threads for
OP3, OP3T, OP5, OP5T, OP6, OP6T, OP7, OP7PRO, regular OP7T, T-Mobile OP7T, regular OP7TPRO and T-Mobile OP7TPRO 5G here is the EDL package (also known as MSM tool or unbrick tool) that can revive a bricked OnePlus 7 Pro 5G EU bough from EE in UK or Elisa in Finland.
It can also be used to rollback your phone to a previous release of OOS if for some reason you want to go back to an older firmware
It will only work with 5G EU variant GM1920
You can download the following version:
ANDROID 9:
9.5.11 GM27BA
Mirror for first and last MSMs per Android version: https://onepluscommunityserver.com/
Instructions:
Launch MsmDownloadTool V4.0.exe.
Power your device off.
Maintain volume up and volume down keys to get into Qualcomm EDL mode.
Plug your device to your computer using stock OnePlus cable.
Click on Enum to be sure your device is detected and press Start.
Wait ~300 seconds.
Enjoy your brand new device.
FAQ:
Does this work on Mac or on Linux?
Unfortunately no, tool is Windows only. You should need at least Windows 7.
My device isn't detected when I click on "Enum" button
Go to device manager and make sure your phone shows up as QDLOADER 9008.
If it shows up as QHUSB_BULK, it means Qualcomm driver wasn't installed automatically by Windows Update. Download the latest one from Microsoft website at http://download.windowsupdate.com/c..._fba473728483260906ba044af3c063e309e6259d.cab (source https://www.catalog.update.microsof...updateid=8ee52ba0-bdef-4009-88cf-335a678dd67a ) and install it manually by right clicking on QHUSB_BULK and selecting "Update driver software" and "Browse my computer for driver software" to where you downloaded CAB file.
MSM tool is stuck on "Param pre-processing"
Ensure you're using the Qualcomm drivers linked above.
MSM tool is stuck on "Sahara communication failed"
Unplug your phone, get in fastboot mode, turn off phone, wait 15 secondes and get back in Qualcomm EDL mode. You can also try using a USB 2.0 port instead of a 3.0 one.
What is SMT Download mode?
Just don't try to unlock that mode, it will wipe your IMEI and your Widevine certificate if you use it.
Credits:
@jkebwdn for getting 9.5.11 version from OnePlus
@Titokhan for being a friend and providing inspiration in writing
@headsh0t95 for being a friend and suggesting me to request an access to upload files on AndroidFileHost now one year ago for my previous threads
@AndroidFileHost for the hosting
Votton for providing a server as an alternative mirror
OnePlus for the device and OS

Related: [CROSSFLASH/RESTORE] [Sprint 5G] Sprint OnePlus 7 Pro 5G to EU FW and back[10] by @Whoareyou

Thanks
Dear friend, you are an angel.
Im so so thankfull for this, you deserve all in this world. People like you are amaizing.
Greetings from Portugal, and thank you. i tilted with bricked phone .
Give me your paypall to donate.
Some_Random_Username said:
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been modified before it was cool.
Hi everyone, finally, almost one year after this device release date and similar to the previous threads for
OP3, OP3T, OP5, OP5T, OP6, OP6T, OP7, OP7PRO, regular OP7T, T-Mobile OP7T, regular OP7TPRO and T-Mobile OP7TPRO 5G here is the EDL package (also known as MSM tool or unbrick tool) that can revive a bricked OnePlus 7 Pro 5G EU bough from EE in UK or Elisa in Finland.
It can also be used to rollback your phone to a previous release of OOS if for some reason you want to go back to an older firmware
It will only work with 5G EU variant GM1920
You can download the following version:
ANDROID 9:
9.5.11 GM27BA
Instructions:
Launch MsmDownloadTool V4.0.exe.
Power your device off.
Maintain volume up and volume down keys to get into Qualcomm EDL mode.
Plug your device to your computer using stock OnePlus cable.
Click on Enum to be sure your device is detected and press Start.
Wait ~300 seconds.
Enjoy your brand new device.
FAQ:
Does this work on Mac or on Linux?
Unfortunately no, tool is Windows only. You should need at least Windows 7.
My device isn't detected when I click on "Enum" button
Go to device manager and make sure your phone shows up as QDLOADER 9008.
If it shows up as QHUSB_BULK, it means Qualcomm driver wasn't installed automatically by Windows Update. Download the latest one from Microsoft website at http://download.windowsupdate.com/c..._fba473728483260906ba044af3c063e309e6259d.cab (source https://www.catalog.update.microsof...updateid=8ee52ba0-bdef-4009-88cf-335a678dd67a ) and install it manually by right clicking on QHUSB_BULK and selecting "Update driver software" and "Browse my computer for driver software" to where you downloaded CAB file.
MSM tool is stuck on "Param pre-processing"
Ensure you're using the Qualcomm drivers linked above.
MSM tool is stuck on "Sahara communication failed"
Unplug your phone, get in fastboot mode, turn off phone, wait 15 secondes and get back in Qualcomm EDL mode. You can also try using a USB 2.0 port instead of a 3.0 one.
What is SMT Download mode?
Just don't try to unlock that mode, it will wipe your IMEI and your Widevine certificate if you use it.
Credits:
@jkebwdn for getting 9.5.11 version from OnePlus
@Titokhan for being a friend and providing inspiration in writing
@headsh0t95 for being a friend and suggesting me to request an access to upload files on AndroidFileHost now one year ago for my previous threads
@AndroidFileHost for the hosting
OnePlus for the device and OS
Click to expand...
Click to collapse

tbarrosaugustoo said:
Dear friend, you are an angel.
Im so so thankfull for this, you deserve all in this world. People like you are amaizing.
Greetings from Portugal, and thank you. i tilted with bricked phone .
Give me your paypall to donate.
Click to expand...
Click to collapse
Hemm thanks but it was a team work as I wrote in the credits part
But if you're really sure you can find my PayPal email under my profile picture when you view forum from desktop

Sorry to bring up an old thread. Just wanted to know if you know where I can find the firmware to flash the 4g global version that works on the EE UK 5g phone.
I have the UK EE 5g GM1920 version and would like to load the global 4g version on it to enable the dual sim. I don't use 5g and don't care if it doesn't work.

will this unlock sim?

M1r4j said:
Sorry to bring up an old thread. Just wanted to know if you know where I can find the firmware to flash the 4g global version that works on the EE UK 5g phone..
Click to expand...
Click to collapse
Unfortunately you can't flash 4G global version on EE UK variant.
i'm.god said:
will this unlock sim?
Click to expand...
Click to collapse
I believe 5G EU variant shouldn't be SIM locked.

Question Update OnePlus 10 Pro from HydrogenOS (CN) to OxygenOS (EU/GL/IN) without rooting

This process uses Oxygen Updater as I haven't found the full EU/GL/IN stock ROMs anywhere else.
Update OnePlus 10 Pro NE2210 (CN) from HydrogenOS (NE2210_11_A.12) to OxygenOS EU (NE2213_11_A.12)
Download [Play Store] apk and install
[Play Store] install [Oxygen Updater]
[Oxygen Updater] Device: One Plus 10 Pro EU
[Oxygen Updater] Update method: Stable (full)
[Oxygen Updater] Settings > Advanced Mode - activate
[Oxygen Updater] Update > Download the full stock ROM (4.15 GB)
Activate Developer Options
Update > Local install
CURRENT STATUS: Verification failed
I've done this process before for other OnePlus phones and it was very straightforward. For some reason is not working with this OnePlus 10 Pro. Any insight on how to continue?
Thanks!

Bump, redownloaded again the EU version, resetted phone, still fails. Whyyy! Anyone can advise how to go from Hydrogen to Oxygen? Thanks!

Short description for "How to switch from ColorOS (Chinese version) to OxygenOS (IND/EU) on OnePlus 10 Pro". I did the flash under Windows 10, even if I'm usually a Linux guy...
BEFORE DOING THIS MANUAL, MAKE A BACKUP OF THE DATA OF YOUR DEVICE! Your phone will be DELETED completely!
1.)
- Download the desired ROM (Oxygen OS 12.1 A11 (IND) or Oxygen OS 12.1 A12 (EU) (Auntie Google has the answer, effective April 2022) -> extract
- download OnePlus_USB_driver.zip:
https://oneplususbdrivers.com/download-oneplus-usb-driver/ -> extract
- download Android Platform SDK:
https://www.techspot.com/downloads/downloadnow/5425/?evp=de0a68064118855fcddcc3980a2143c4&file=6062 -> extract
- download "Fastboot Enhance Tool": https://forum.xda-developers.com/t/...enhance-payload-dumper-image-flasher.4310553/ -> extract
2.) First of all, disable driver signature check for Windows 10, because the OnePlus drivers are not signed (yet).
3.) After restarting Windows, install the OnePlus drivers by executing the .exe file from the extracted folder.
4.) Copy the payload.bin file from the downloaded ROM into the folder where the fastbootenhance tool is located
5.) Enable Developer Options on your phone
6.) Enter the Developer Options, enable OEM unlock and USB debugging there
7.) Now connect your OnePlus 10 Pro to your computer by a USB cable. Make sure it's started, screen unlocked and charged over 60%
8.) On your computer, open File Explorer and switch to the Android SDK folder. Click in the address line above and type CMD [Enter]. A CMD window opens in the SDK folder.
9.) In CMD, type "adb devices". A new line should appear with the encrypted name of your device. When an empty line is returned, check the driver installation. If this line returns the name, but the suffix "not allowed", you must first allow this connection ON YOUR PHONE. Disconnect and reconnect your device and confirm the popup that appears on your phone! (Best is to enable "Always allow connections from this computer"!)
10.) Now type "adb reboot bootloader" in CMD. Your telephone restarts automatically to bootloader mode. In this mode your phone should tshow you it's name and beside of some other information you don't need, that the bootloader is LOCKED.
11.) Type in CMD "adb flashing unlock [Enter]". Now your phone should restart and ask you, if you want to unlock the bootloader or do not unlock the bootloader. With the volume buttons, switch to "UNLOCK BOOTLOADER" and confirm by pressing the Power Button.
12.) After doing so, restart your phone. After rebooting, go back to CMD and type "adb reboot fastboot". Your phone now should restart to "FASTBOOTD MODE". You are asked to choose a language (I recommend english after all... ;-) )
13.) Open the "Device Manager" on your computer.
14.) If device manager shows you some unknown device like "Android: ! 'ossi'" or similar, your device is not recognized in fastbootd mode. In that case continue with pt. 15. Otherwise continue with pt. 19
15.) Right-click on the unknown Android device and choose "Update driver..." -> "Search my computer for drivers" -> "Pick from a list of available drivers on my computer"
16.) When OnePlus drivers where installed correctly some steps above, Device Manager should suggest you 3 different possible drivers. Choose "OnePlus ADB Interface Manager" and confirm your choice. Windows will warn you that a wrong choice will crash Windows. Confirm also this warning.
17.) If everything went good, the before unknown device will change to an Android ADB Interface Device. When that happend, everything is good and you're good to go on.
18.) Just to be really sure: Type in CMD again "fastboot devices" and your computer should tell you the s/n of your phone with the suffix "fastboot". This will tell you your device is recognized in fastboot mode.
19.) Start "FASTBOOTENHANCE" tool from the respective folder (Folder name "release")
20.) Now you can follow the instructiions here at pt. 8.:
How to Install Indian ROM on Chinese OnePlus 10 Pro
In this comprehensive tutorial, we will show you the detailed steps to install the Indian ROM on the Chinese OnePlus 10 Pro.
www.droidwin.com
Puuuuuuh! That was enoying..! Maybe I have missed something... If so, please tell me by PN and I will complement this manual. But at this time, I guess it should work. I did it right like that this day - and it works fine! Finally I have my foremost chinese OP10Pro with a EU ROM in (swiss) german!
And if it works just like that (after my manual), please let me know as well!
Have fun! Oliver
Oh, there's something I forgot: I had after flashing still about a dozen of chinese apps I had to delete manually. Don't be surprised by that!

Thank you! Can you relock the bootloader afterwards? What model shows in the phone info screen?

This worked for me! Thanks very much.
After installing EU firmware, I factory reset the phone but Google Pay wont work saying the phone is rooted but when I launch Root Checker, it says ' Sorry! Root access is not properly installed on this device'
Is the root broken? Do I need to root again? Any ideas how to fix?

Lynxy0 said:
This worked for me! Thanks very much.
After installing EU firmware, I factory reset the phone but Google Pay wont work saying the phone is rooted but when I launch Root Checker, it says ' Sorry! Root access is not properly installed on this device'
Is the root broken? Do I need to root again? Any ideas how to fix?
Click to expand...
Click to collapse
If you relock the bootloader and reset, does it behave like a normal non-rooted phone with EU firmware?

Ultimatum99 said:
If you relock the bootloader and reset, does it behave like a normal non-rooted phone with EU firmware?
Click to expand...
Click to collapse
Good shout - Let me try that and get back to you.

Yes, this worked

Lynxy0 said:
Yes, this worked
Click to expand...
Click to collapse
Did the Chinese apps disappear once you locked the bootloader and resetted? Which method did you use to relock? What model is being shown in the phone info page? Thanks!!!

No they did not. After the first flash, the OP Launcher was back (previously it was Google Phone Launcher) . I factory reset and Chinese apps were back.

Ultimatum99 said:
Thank you! Can you relock the bootloader afterwards? What model shows in the phone info screen?
Click to expand...
Click to collapse
Hi Ultimatum99
I didn't relock my bootloader yet, but I'll do it in the next days, I'll post the update here. (Speaking technically it's possible, yes, but I don't know yet what happens...) And my model shows "NE2213" after the update.

Lynxy0 said:
This worked for me! Thanks very much.
After installing EU firmware, I factory reset the phone but Google Pay wont work saying the phone is rooted but when I launch Root Checker, it says ' Sorry! Root access is not properly installed on this device'
Is the root broken? Do I need to root again? Any ideas how to fix?
Click to expand...
Click to collapse
Hi Lynxy0
No, your phone is not rooted, but the bootloader is still unlocked, even after the update. And that means your phone is vulnerable to attacks from outside. So Google Pay tells you your phone is rooted, just to keep you safe. Try to relock your bootloader, this should solve the problem. (I didn't do it yet, but I'll post the update when I've done it.)

Lynxy0 said:
Yes, this worked
Click to expand...
Click to collapse
Haha... I was too late then!(See my last replay...) But thanks for the feedback!

Lynxy0 said:
No they did not. After the first flash, the OP Launcher was back (previously it was Google Phone Launcher) . I factory reset and Chinese apps were back.
Click to expand...
Click to collapse
This is unfortunately a bad thing... Some chinese apps are really back, even after flashing and resetting the device. But I could delete them manually. Yeah, it took me a few minutes, but at least, I had (finally) my beloved OxygenOS back! (After I crashed my OP6T almost 2 years ago, I chose a Oppo FindX 2 Pro - and after almost 2 years I still regret to have paid for this phone... The hardware was really cool, but ColorOS is ... So I was really terrified when I learned my brand new [chinese] OP10Pro had ColorOS installed by default..!)

Loba74 said:
This is unfortunately a bad thing... Some chinese apps are really back, even after flashing and resetting the device. But I could delete them manually. Yeah, it took me a few minutes, but at least, I had (finally) my beloved OxygenOS back! (After I crashed my OP6T almost 2 years ago, I chose a Oppo FindX 2 Pro - and after almost 2 years I still regret to have paid for this phone... The hardware was really cool, but ColorOS is ... So I was really terrified when I learned my brand new [chinese] OP10Pro had ColorOS installed by default..!)
Click to expand...
Click to collapse
Let us know if you manage to relock the bootloader and share the full process please, I can update the guide with your findings. Thanks!

Loba74 said:
Hi Lynxy0
No, your phone is not rooted, but the bootloader is still unlocked, even after the update. And that means your phone is vulnerable to attacks from outside. So Google Pay tells you your phone is rooted, just to keep you safe. Try to relock your bootloader, this should solve the problem. (I didn't do it yet, but I'll post the update when I've done it.)
Click to expand...
Click to collapse
It was pretty straight forward, unroot by uninstalling Magisk. adb into the bootloader and send the adb bootloader lock command, then boom, its locked. It wipes your phone in doing so, so you will have to everything again.

Lynxy0 said:
It was pretty straight forward, unroot by uninstalling Magisk. adb into the bootloader and send the adb bootloader lock command, then boom, its locked. It wipes your phone in doing so, so you will have to everything again.
Click to expand...
Click to collapse
Thanks @Lynxy0
So, just to clarify, after relocking the bootloader (which causes a full wipe) Google Pay works again?
Also, do you know if Netflix installs after relocking the bootloader? (Because in most phones once the bootloader is unlocked the status changes from "L1" and doesn't change back again after locking. Netflix reads that status, and Netflix will only install if it is L1.)
Many thanks

Hi Guys
It seems like a straight forward process, It was all good until I try flash it. . When I loaded the downloaded zip file, I couldn't get the payload file in fastbootd and flash it those buttons are missing(after I load it to payloadDumper .) . I thought it might be file download has some issue. I tried different ones , the same thing.
any ideas?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
C.

never mind , I figured it out . My case is the ADB driver problem , even u unlocked the bootloader , somehow the fastbootenhance wont work correctly , strange , ... but.
C

@Loba74 I think there is an error in your guide, in step 11 maybe it should say "fastboot flashing unlock" rather than "adb flashing unlock" ?