Hi,
the display refresh rate is stuck in automatic mode and I can't change it because the options are greyed out.
Does anybody have an idea what I maybe messed up here?
Regards,
Hyper
If you've locked the refresh rate to a specific value as a custom power/batery setting, that will disable the switch and default to whatever you've fixed it to. Once you remove it, it will become flexible again
Andrologic said:
If you've locked the refresh rate to a specific value as a custom power/batery setting, that will disable the switch and default to whatever you've fixed it to. Once you remove it, it will become flexible again
Click to expand...
Click to collapse
Thank you for the hint. I looked but I could not find any setting related to this. :-/
Did you unbloat the phone in any way?
ROM? Mods? Unlocked bootloader? Magisk? Magisk Mods?
Yes, I unbloated a bit, very carefully. But I will recheck this.
[email protected] said:
Did you unbloat the phone in any way?
Click to expand...
Click to collapse
Thanks, it seems I uninstalled at least one too much.
After reinstalling com.asus.hardwarestub, it is working again
Related
I want to disable auto-rotate.
Where can I find it? From what I've read until now it looks like impossible.
But that can't be true! There should be a option to disable the accelerometer!
Any input is welcome.
Guus_ said:
I want to disable auto-rotate.
Where can I find it? From what I've read until now it looks like impossible.
But that can't be true! There should be a option to disable the accelerometer!
Any input is welcome.
Click to expand...
Click to collapse
At the moment there is no option for disabling auto-rotate. It is completely App/Developer dependent, and there is not option in the OS itself. I can't remember where the thread is but there's a GIANT suggestion thread on Microsoft's Support website, as people who use the phone lying down or on the couch will find the evils of Gravity annoying.
Guus_ said:
I want to disable auto-rotate.
Click to expand...
Click to collapse
Some custom ROMs let you turn the sensor off from the settings page. If you're on a first gen or HTC WP7 then this is likely to be an option.
Hi,
I recently got a wireless charging receiver for the phone and now I get this annoying popup which says to close the micro usb properly to prevent water damage.
This happens also sometimes during charging in the middle of the night.
Can anyone tell me how to disable the popup? To make it clearer, it is not the flashing text that appears when the phone is connected to the charger. ( this can be disabled via xposed module)
The one I am talking about is more like a text with a white background picture.
"for protection against water damage firmly seal the charging cover before use"
Anyone else with the "problem" ?
I am on NEE-I9295XXUBMK2.
Thanks for the help in advance.
[edit]
this also happens when I disconnect the device from USB.
No one with this problem?
colida said:
No one with this problem?
Click to expand...
Click to collapse
I second that!
I have found battery_cover_notice.xml in systemui\res\layout
There is an battery_cover_notice_image and an battery_cover_notice_message
The Pic is help_img_usb.png in folder systemui\res\drawable-hdpi
Now you can try and delete the battery_cover_notice.xml from the SystemUI
Darkman said:
I have found battery_cover_notice.xml in systemui\res\layout
There is an battery_cover_notice_image and an battery_cover_notice_message
The Pic is help_img_usb.png in folder systemui\res\drawable-hdpi
Now you can try and delete the battery_cover_notice.xml from the SystemUI
Click to expand...
Click to collapse
I tried and it worked ( at least the popup doesn't appear anymore) but I do not have a notification area at the top anymore. No clock, Signal or anything.
Perhaps it's because of the odex file? Didn't touch that.
I will try it again. Might be, I did something wrong.....
Thanks
okay thanks for feedback...
I will investigate this....
So is there no non-root way of disabling this?
colida said:
Anyone else with the "problem" ?
Click to expand...
Click to collapse
I am.
No solution found so far.
Only I remember - that started after OTA update from Samsung in later 2013.
On original software I didn't have such warning.
Before and after is 4.2.2 Android, I didn't notice any changes, so I am lookiing for old firmware to download...
p.s. I also have wireless charger from "indiegogo"
shafty023 said:
So is there no non-root way of disabling this?
Click to expand...
Click to collapse
No sorry
Cloud it be that this notice is a toast with a custom theme? You could check it with my app EnhancedToast, and hide it if it is a toast. Enable logging in the app and watch it.And yes, root is required for Xposed. Btw, the Google edition don't show it at all
defim said:
Cloud it be that this notice is a toast with a custom theme? You could check it with my app EnhancedToast, and hide it if it is a toast. Enable logging in the app and watch it.And yes, root is required for Xposed. Btw, the Google edition don't show it at all
Click to expand...
Click to collapse
^Mostly what I was going to say, so thanks.
You should check EnhancedToast if you can, and you could always switch ROM's - I'm loving the CM 10.2 ROM, which doesn't have the warning, and offers a lot of other advantages. If a notification comes up in the bar, long-press it and see if comes up with the "app info" button - it could be run through some sort of stock app that you could disable or uninstall altogether.
Hi everyone! I'm new on the forum and in smartphones as well. Rooted GT-i9252 last week. Starting to develop app in future.
:cyclops:
tiskael said:
^Mostly what I was going to say, so thanks.
You should check EnhancedToast if you can, and you could always switch ROM's - I'm loving the CM 10.2 ROM, which doesn't have the warning, and offers a lot of other advantages. If a notification comes up in the bar, long-press it and see if comes up with the "app info" button - it could be run through some sort of stock app that you could disable or uninstall altogether.
Click to expand...
Click to collapse
Did I switch ROM when I rooted my phone? Is it the same thing?
tiskael said:
If a notification comes up in the bar, ...
Click to expand...
Click to collapse
No notifications, just message on bottom of the screen.
tiskael said:
I'm loving the CM 10.2 ROM, which doesn't have the warning
Click to expand...
Click to collapse
Any good source to learn more of ROMs? What do I lose if I dump the original, what do I get with some other ROM?
How should I backup? Meaning there's lot's of data:
- contacts and messaging and that stuff
- pictures, music, videos etc
- OS (?)
- ROM
- Apps (downloaded and system)
Maybe someone could explain the best practice to backup ROM,OS and apps.
Thanks in advance, Kaptah.
Kaptah said:
Hi everyone! I'm new on the forum and in smartphones as well. Rooted GT-i9252 last week. Starting to develop app in future.
:cyclops:
Click to expand...
Click to collapse
Welcome
Did I switch ROM when I rooted my phone? Is it the same thing?
Click to expand...
Click to collapse
What method of rooting your phone did you use? They are not the same thing, but it is possible to do them both at the one time. If everything looks different, then yes, you would have changed your ROM while rooting.
Any good source to learn more of ROMs? What do I lose if I dump the original, what do I get with some other ROM?
How should I backup? Meaning there's lot's of data:
- contacts and messaging and that stuff
- pictures, music, videos etc
- OS (?)
- ROM
- Apps (downloaded and system)
Maybe someone could explain the best practice to backup ROM,OS and apps.
Thanks in advance, Kaptah.
Click to expand...
Click to collapse
Check the link below, it's a good place to start.
http://www.android.gs/root-galaxy-s4-active-international-i9295-and-att-i337-models/
colida said:
Hi,
I recently got a wireless charging receiver for the phone and now I get this annoying popup which says to close the micro usb properly to prevent water damage.
This happens also sometimes during charging in the middle of the night.
Can anyone tell me how to disable the popup? To make it clearer, it is not the flashing text that appears when the phone is connected to the charger. ( this can be disabled via xposed module)
The one I am talking about is more like a text with a white background picture.
"for protection against water damage firmly seal the charging cover before use"
Anyone else with the "problem" ?
I am on NEE-I9295XXUBMK2.
Thanks for the help in advance.
[edit]
this also happens when I disconnect the device from USB.
Click to expand...
Click to collapse
Install Xposed installer, and then Wanam Xposed, the option you want you can find in the sound options there...
Bartbig said:
Install Xposed installer, and then Wanam Xposed, the option you want you can find in the sound options there...
Click to expand...
Click to collapse
I did not find this option ...
araignee said:
I did not find this option ...
Click to expand...
Click to collapse
Sorry, my mistake, i checked, but its in the Lockscreen options, almost at the bottom, @ power options there you can "Hide Wireless Charging Dialog"i think that's what you need...
You installed "Wanam xposed"?
Bartbig said:
Sorry, my mistake, i checked, but its in the Lockscreen options, almost at the bottom, @ power options there you can "Hide Wireless Charging Dialog"i think that's what you need...
You installed "Wanam xposed"?
Click to expand...
Click to collapse
OK I've found the option but it's not the one I was looking for. This one seems to remove the message when you plug your phone to the power supply. Maybe I'm wrong. Anyway thanks a lot for your help.
colida said:
No one with this problem?
Click to expand...
Click to collapse
This problem appeared/reappeared when i upgraded from 4.2.2 to 4.3 (ML2)
After rooting ( http://forum.xda-developers.com/showthread.php?t=2690133 )
and disabling KNOXagent it still gives this warning, which it did not do after the 4.2.2 Active Root.
This is merely an annoyance but if someone figures out a quick way to disable it that would be grand.
i have this issue too. cant wait for a fix for this. just updated to 4.3 a few days ago and having to tap the bubble everytime is just annoying. why the hell would they add these rediculous notifications? its not like att or samsung will stand behind the "waterproof" claim anyway..... water damage weather the door is open or closed means your screwed no matter what.
I've personally tried using the "EnhancedToast" module for xposed and the prompts do not register as toast events. It has to be something else.
Hello.
I have searched with no result.
My question is: can tasker modify the dp (not DPI) setting that is under developer options and the text size?
I want to do this before connecting the device to an external screen through hdmi.
I know that secondscreen app can be launched within tasker and can change resolution and DPI but that also requires an UI refresh. Is a little more complex than using the options that are in the system already.
Thank you.
There is quite a good chance you can do it through shell root commands if you read this shirt article
http://www.notenoughtech.com/tasker/tasker-run-shell-commands/
Pantumaca said:
Hello.
I have searched with no result.
My question is: can tasker modify the dp (not DPI) setting that is under developer options and the text size?
I want to do this before connecting the device to an external screen through hdmi.
I know that secondscreen app can be launched within tasker and can change resolution and DPI but that also requires an UI refresh. Is a little more complex than using the options that are in the system already.
Thank you.
Click to expand...
Click to collapse
Is is the option you asked? If yes, then it's possible.
You can use Autotools Plugin to change it.
Hopes this help.
@Jakob1379, @aillez thank you for answering.
The problems is that my case is a non rooted device, so the most of those shell commands cannot be executed.
The text size is one of the options I want change, the other is not the display size. Is the "smallest width" (i think is called that way in English) under developer options.
I will try to find the setting and see if it can be changed with shell command without root.
Thank you.
aillez said:
Is is the option you asked? If yes, then it's possible.
You can use Autotools Plugin to change it.
Hopes this help.
Click to expand...
Click to collapse
Would suggest autotools as well and if that doesn't do the job, he probably has to resort to automating screen touch with something like autoinput
Pantumaca said:
@Jakob1379, @aillez thank you for answering.
The problems is that my case is a non rooted device, so the most of those shell commands cannot be executed.
The text size is one of the options I want change, the other is not the display size. Is the "smallest width" (i think is called that way in English) under developer options.
I will try to find the setting and see if it can be changed with shell command without root.
Thank you.
Click to expand...
Click to collapse
Can you capture what option you want to change in english?
Maybe I can help guide you to achieve it.
By the way... Autotools can be use without root.?
aillez said:
Can you capture what option you want to change in english?
Maybe I can help guide you to achieve it.
By the way... Autotools can be use without root.
Click to expand...
Click to collapse
This:
https://goo.gl/images/DV3bF4
I will try autotools.
Pantumaca said:
Hello.
I have searched with no result.
My question is: can tasker modify the dp (not DPI) setting that is under developer options and the text size?
I want to do this before connecting the device to an external screen through hdmi.
I know that secondscreen app can be launched within tasker and can change resolution and DPI but that also requires an UI refresh. Is a little more complex than using the options that are in the system already.
Thank you.
Click to expand...
Click to collapse
Just make it easier find a suitable solution for you, could you please provide some info as to what device you are currently using and what version of android?
Jakob1379 said:
Just make it easier find a suitable solution for you, could you please provide some info as to what device you are currently using and what version of android?
Click to expand...
Click to collapse
Yes, sure:
Htc u11
8.0
Thank you for your interest.
Is it possible to use tasker to switch on lastpass accessibility toggle? My OnePlus 3t (not rooted, OOS 9.0.4) deactivates it almost on a daily basis. I have switched off battery optimisation for lastpass but the phone turns the toggle off.
Use auto input
Ta. I'll check that out
Hi there. Maybe you can try using the "Custom Setting" action for that. Try using the Magnifying glass in the action with the option to automatically find the setting and see if Tasker can find it. Hope this helps!
joaomgcd said:
Hi there. Maybe you can try using the "Custom Setting" action for that. Try using the Magnifying glass in the action with the option to automatically find the setting and see if Tasker can find it. Hope this helps!
Click to expand...
Click to collapse
I found that by googling but I can't figure out how to make it toggle the switch. The tasker forum talks about reading the accessibility setting but gives no more details than 'brilliant that works'
Eggstones said:
I found that by googling but I can't figure out how to make it toggle the switch. The tasker forum talks about reading the accessibility setting but gives no more details than 'brilliant that works'
Click to expand...
Click to collapse
The easy way is to use the Secure Settings action in AutoTools. That has a direct option for accessibility services. I plan on adding that option to Tasker directly at a later date.
With the Custom Setting action what you should do is read the value, remove or add the needed service from the list, the write the setting.
Ta I'll test that
joaomgcd said:
The easy way is to use the Secure Settings action in AutoTools. That has a direct option for accessibility services. I plan on adding that option to Tasker directly at a later date.
With the Custom Setting action what you should do is read the value, remove or add the needed service from the list, the write the setting.
Click to expand...
Click to collapse
I must be missing something here. Autoapps seems to only control a subscription service. Can't see anything called secure settings when I download it.
Eggstones said:
I must be missing something here. Autoapps seems to only control a subscription service. Can't see anything called secure settings when I download it.
Click to expand...
Click to collapse
I mentioned AutoTools, not AutoApps
joaomgcd said:
I mentioned AutoTools, not AutoApps
Click to expand...
Click to collapse
Mea culpa mea maxima culpa.
I'll try again.
I seem to have manage to get the change state to react to it switching state but need to do some adb to see if it works.
Deleted
joaomgcd said:
The easy way is to use the Secure Settings action in AutoTools. That has a direct option for accessibility services. I plan on adding that option to Tasker directly at a later date.
With the Custom Setting action what you should do is read the value, remove or add the needed service from the list, the write the setting.
Click to expand...
Click to collapse
I can now get the profile to switch on but I cannot figure out how to get the secure setting to change the toggle.
Both profile and task shows up as green but nothing seems to happen.
Eggstones said:
Mea culpa mea maxima culpa.
I'll try again.
I seem to have manage to get the change state to react to it switching state but need to do some adb to see if it works.
Click to expand...
Click to collapse
No problem at all Let me know how it goes!
joaomgcd said:
No problem at all Let me know how it goes!
Click to expand...
Click to collapse
Not well at all. The profile activates but nothing is actually changed.
Eggstones said:
Mea culpa mea maxima culpa.
I'll try again.
I seem to have manage to get the change state to react to it switching state but need to do some adb to see if it works.
Click to expand...
Click to collapse
Eggstones said:
Not well at all. The profile activates but nothing is actually changed.
Click to expand...
Click to collapse
Does it work if you run the task manually?
joaomgcd said:
Does it work if you run the task manually?
Click to expand...
Click to collapse
No. If I click on the task I don't get an error or the green dot. Instead I get a grey play arrow Infront of the task.
In the profile window both the profile and task shows up as green.
Eggstones said:
No. If I click on the task I don't get an error or the green dot. Instead I get a grey play arrow Infront of the task.
In the profile window both the profile and task shows up as green.
Click to expand...
Click to collapse
That means that Tasker doesn't seem to be able to communicate with AutoTools. Do other AutoTools actions work?
To make sure Tasker and the AutoApps run in the foreground please check here: https://tasker.joaoapps.com/userguide/en/faqs/faq-problem.html#00
joaomgcd said:
That means that Tasker doesn't seem to be able to communicate with AutoTools. Do other AutoTools actions work?
To make sure Tasker and the AutoApps run in the foreground please check here: https://tasker.joaoapps.com/userguide/en/faqs/faq-problem.html#00
Click to expand...
Click to collapse
Sorry to be a pain but I cannot find the run in foreground setting on my OnePlus 3t.
Eggstones said:
Sorry to be a pain but I cannot find the run in foreground setting on my OnePlus 3t.
Click to expand...
Click to collapse
Did you check here?
joaomgcd said:
Did you check here?
Click to expand...
Click to collapse
Yep. All those seeking are correctly set. It's the tasker foreground setting I cannot find. Tried googling it but the links I found doesn't match what I see in tasker.
Do we have solution to this warning sign aside from using notif cleaner? This is the result of Converting CN to WW Rom.. TIA
Would like to know this as well, I keep force closing the notification but it always comes back..
If you still rooted, install Notifications Off (root) from play store. Uncheck hardware stub service. Feel free to uninstall or restart the device. It wont bring that notification back.
Buy a global, problem solved.
MrxSiN said:
If you still rooted, install Notifications Off (root) from play store. Uncheck hardware stub service. Feel free to uninstall or restart the device. It wont bring that notification back.
Click to expand...
Click to collapse
I see. I already unroot and relock my phone. Thanks anyway.
bs3pro said:
Buy a global, problem solved.
Click to expand...
Click to collapse
Well, that's not an option for me.?
i bought a Tencent version with WW version already installed by the seller i have updated my device twice and didn't face this notification at all.
i don't know how they fixed this problem, but it means there is a way to pass it permanently
EQLM said:
i bought a Tencent version with WW version already installed by the seller i have updated my device twice and didn't face this notification at all.
i don't know how they fixed this problem, but it means there is a way to pass it permanently
Click to expand...
Click to collapse
Same here I don't get the notification at all
EQLM said:
i bought a Tencent version with WW version already installed by the seller i have updated my device twice and didn't face this notification at all.
i don't know how they fixed this problem, but it means there is a way to pass it permanently
Click to expand...
Click to collapse
Nice. I hope someone will share the process. I have read some fix but it says that it will ruin your refresh rate and it will be stuck at 60hz
DooDLeZ13 said:
Nice. I hope someone will share the process. I have read some fix but it says that it will ruin your refresh rate and it will be stuck at 60hz
Click to expand...
Click to collapse
refresh rate works fine but the problem we don't know how they managed to do it
This is what worked for me. When notification pops up...
. Click manage
. Select three dots upper right corner
. Show system notifications
. Select HardwareStub Services
. Click to mute notification and select one line for notification bar
The actual notification is still there after reboot. But you won't see it or hear it unless you pull down notification bar, then you will see it. But it's better than popping up automatically
I also have the Donate version of NCleaner and your able to hide the notification permantley under Premium settings.
If you have any issues with NCleaner not properly hiding notification after reboot. Check your permissions under app settings that everything is allowed
EQLM said:
refresh rate works fine but the problem we don't know how they managed to do it
Click to expand...
Click to collapse
Hello! Istruction in this link