Hi
I'd like some help, on the Asus Z 8
If I want to make a call but want my
Mobile number to show as private were would I find the setting?
Thank you
Go to call app, 3 dots on top left, settings, call, carrier specific, additional settings, sim 1 or 2, caller ID
It is buried there. Hope my English/German translation works for you.
Related
I set my phone (AT&T Tilt) to block all outgoing caller ID and would like to be able to selectively turn this off by adding the usual #code prefix (usually *82 in the US) to the dialed number. Apparently, once you set the tilt to do this, you can not unblock the number without going back into phone settings and changing this setting. I spoke to AT&T who could not offer an answer or solution and they sent me to HTC who said it is a feature of WM and there is no solution unless the carrier provides one. I am never sure if AT&T support really knows the right answer - has anyone else dealt with this - is there any other code/#prefix that works or any other possible solution
Thanks!
Not sure if the codes are network dependent, but on Vodafone in the UK i dial *31# plus the number to dial. This will show my number for this call only.
HTH
Did you read the manual??? NO!!!!
Go to phone, selectect menu, select options, go to services tab, select caller ID, click get network settings, then select the one you want. AT&T does not support *69 & *82 on the Tilt.
Hey - how do you think I set the device to block caller ID Einstein? How about you read the post next time
Hi,
I cannot find the option to turn on the feature, that the name of the caller is displayed, when it is in the phonebook. Right now, only the international number is shown whe somebody calls. What do I have to configure? Thx.
Regards Heinzelrumpel
No ideas ??????
WM5 onwards it is already there.
You have to feed the number for each contact as +<country code><areacode><Number>. For example +919896312345
I have a tytn 11 from orange and cant seem to find anywhere that I can withhold my my number as I dont want to sent it out. Does any onr know where I can find this feature?
Thanks
Braindead
You can go to "Settings - Personal - Phone - Services - CallerID", click on "Get settings" and then select what you deem necessary .
just dial #67 before you dial the number and it will show up as "unknown".
This works on a landline also, but you would pick up the phone, dial *67, hear 3 beeps then dial the number.
With a cell phone, just type it all in a row. For example to dial 555-4444, you would enter *675554444 and press send.
Try it between you and friend to see how it works.
Edited as having brain spasm will post when brain works
Brain kinda working: Think 141 infront of no. in UK
Use Case:
1. Call a conference call number eg: WebEx
2. You are asked to enter the meeting number
3. You press the numbers but no tones are played
Had a tech support call with Samsung just now.
Firstly they say this isn't a feature on EU Note 8s (WTF!)
Then say it should work out of the box and my phone is faulty so take it to a Samsung centre for evaluation / exchange
I reckon this is a software bug. Can someone else in the EU dial any number and when you're connected to the call, press a number on the dial pad and tell me if you hear the tone played?
Im not in EU, but in the states it works fine, i have many conference calls daily and it always works for me entering my codes to get into the call. It should be working fine on your model as well, possible a issue with the carrier side of things or its turned off in the hidden settings.
Edit:
Try ##DATA#, if it brings up a menu, put in 000000 as your msl, then go to More, then go to DTMF SET. See if its off or not set at all? US model has a option here for this at least.
Hi
The ##2832# doesn't work on my phone. It's a real pig seeing as I work remotely!
Don't even seem to be able to use a 3rd party DTMF tone generator either (well I can but the system at the other end isn't hearing the tones).
joebongo said:
Hi
The ##2832# doesn't work on my phone. It's a real pig seeing as I work remotely!
Don't even seem to be able to use a 3rd party DTMF tone generator either (well I can but the system at the other end isn't hearing the tones).
Click to expand...
Click to collapse
I have a Galaxy N950N and I have this same issue. Did you ever get this working? I can't seem to find a secret service menu to enable it, and I know I'm doing something wrong here.
Hi
Not specifically a fix but the only place I'm having issues with is WebEx. If you try your voicemail, does that work ok? Mine is fine but for some reason WebEx isn't
joebongo said:
Hi
Not specifically a fix but the only place I'm having issues with is WebEx. If you try your voicemail, does that work ok? Mine is fine but for some reason WebEx isn't
Click to expand...
Click to collapse
Mine doesn't work across the board, irrespective of voicemail or other conference call. No dial tone is played in-call when you press the dial pad.
ajm786 said:
Mine doesn't work across the board, irrespective of voicemail or other conference call. No dial tone is played in-call when you press the dial pad.
Click to expand...
Click to collapse
Figured it out. It's the CSC. Apparently, it doesn't work properly with the N950N (at the least the one I had installed, which was default with the Renovate ROM). I had to use the Flashable CSC Selection V1.2.5 from Tkkg1994, manually add the greatlte line into it, and once flashed, I got all the options in the dialer for TTY (I think which relates to DTMF), and most importantly, sound feedback when pressing the dialpad while in-call.
Solution
Go to settings -> sound and vibration -> uncheck the the dialling keypad tones(if checked).
Hope this helps!
this works. Go figure... you disable the dialling keypad tones and you can now use the keypad tones. Thanks for the help. This has infuriated me for months
I had not payed any attention to this, as I used some services that require you to input numeric options during call, and all worked fine, but, yes, no tones heard, but the tones are sent anyway
What worked for me was dialing the original number manually - not from the phone memory or contacts!
I use a Gigaset HC450 Doorbell that is able to divert a call.
This is a rare device, check ebay, it is a DECT phone on a Siemens Gigaset IP Base Station with a SIP provider configured)
So if someone presses the doorbell button on the Gigaset HC450 and status is set to AWAY
then the configured SIP provider inside the BASE station does an external call to my mobile because I set up my mobile number inside the HC450 Menu for Diversion
So my mobile is a Samsung Note 8, at the moment i run Stock Hungarian unbranded firmware N950F
When there is a call from the doorbell, there is a sentence said by a female voice: "Doorbell is ringing, to connect press 1, to stop press hash"
I cannot proceed by pressing 1, neither with Dialpad tones activated nor deactivated, and also a 3rd party DTMF tone generator does not work
Someone in this thread said it was fixed by flashing different CSC, which i think is not true because many said that they got webex fixed by simpy DEACTIVATING dialpad tones
I am greatful for all ideas that you have in order to get this working, its a new challange and I found this thread so I posted my topic here, too
Thank you very much for reading
I am having a interesting issue with my phone that I cannot figure out. When I receive a text message the system adds a +1 to the start of the phone number it is coming from, I am using the Samsung Messages application but this does the same thing apparently with the Google SMS app and the Verizon messenger app (as I have\ tried these as well), this only happens with a text and if I get a phone call or look in the address book no numbers have a +1.
The reason this is an issue is because my car imports my phonebook as it appears in the contacts and when I get a text it comes up as Unknown Caller because of the added +1 but phone calls do not have the +1 so they show up just fine.
While working on this I have discovered that if I go to the text by going to my contacts then clicking on the persons name it will remove the +1 and it will stay removed as I text them but the second I get texted back the +1 is added. I called Verizon eventually and was told reset settings, reset network settings, turn off assisted dialing. None of these work and there next solution was to factory reset, I don't think this will help because it isn't just my phone but my wife and son who also got the same phone have the same thing happen.
Has anyone experienced this and know how to fix it. I have been through all the phone and dev settings looking for something. I cannot find any other threads online for this except for a couple from AT&T users from different samsung phones years ago with no answer. Previous to this we were using Note 9's and did not have this issue. Any help is appreciated.
edit: The phone is not rooted or modded and is on Android 11 One UI 3.1, sorry forgot to add that.
I think it's under: Settings -> Call Settings -> Other call settings -> Roaming assistance
rufus15 said:
I think it's under: Settings -> Call Settings -> Other call settings -> Roaming assistance
Click to expand...
Click to collapse
That is assisted dialing I turned off already and it didn't affect it. It's also just on text messages phone functions don't have this happen for some reason.
The +1 is your coumtry code prefix (USA).
While you can change this in your messaging app you can't change it from eveyone else's phone.
From using it in your car radio might be somethng in your car settings or else in your contact list add the +1 to all your contacts.
spawnlives said:
The +1 is your coumtry code prefix (USA).
While you can change this in your messaging app you can't change it from eveyone else's phone.
From using it in your car radio might be somethng in your car settings or else in your contact list add the +1 to all your contacts.
Click to expand...
Click to collapse
I understand that the +1 is the country code.
It isn't from other people's phones it is the way the Ultra is handling the information when it comes to text messaging. I did the following test. I removed my son as a contact in my phone and called my phone from his. The phone number shows up as (xxx) xxx-xxxx. I then sent a text message to myself from his phone while he still was not in my contacts. I have 3 different text applications on my phone right now for testing purposes (default Samsung, Google's SMS app, and Verizon Messeages) and all 3 shows the phone number as +1 (xxx) xxx-xxxx.
The car isn't adding the the +1 to contacts, when my phonebook syncs to the car and I go into it the phonebook on my cars display they show the same as in my contacts "Contacts Name" (xxx) xxx-xxxx but when a text comes in it shows Unknown +1 (xxx) xxx-xxxx.
The issue solely lies with text messages being received on the S21 Ultra as this happens when people on Apple phones or Android phones (multiple brands) text me.
In regards to text messaging in general, i live not far from you ( about 9500 miles ) and I have a different device then yours. Receiving text messages from someone in my contacts list shows up contact name. Receiving other text message not in my contact list will show as country code and phone number. There are exceptions to this in regards to texts from government agencies and google which will show up who are not in my contacts list. I think texts messaging work around the international standard ie: country code + phone number while phone calls may not (unless making international calls). So i don't think it's device specific as it more to do with the networks that you connect to.
In regards to talking to you car ( text wise ) i may be of little help as i don't have a android 11 device and a car to talk to.
Since your note 9 works, and as far as i know latest version is android 10, it could be an issue with android 11. From your test using your son's phone have tried to add the +1 to his number to your phone and see if it's make a difference.