Hello,
I present you a custom kernel from Indonesian's dev Rama982
It's a beta but work fine for daily use
work on all region ( EEA,RU,Global, etc ...)
tested on EEA device
thx to azek1l from 4pda
Genom R kernel project
Genom Kernel For Rosemary | Android 11
Updated: 01/10/'21 (GMT+7)
◾️Genom R || Rosemary
Changelogs:
• Boost UX / Smoother UI
• Upstream to Linux Stable 4.14.248
• Upstream LZ4 to v1.8.3
• Add GPU freq info for FKM
• Add support for TTL fixation
• f2fs: Force strict fsync mode
• Include Magisk v23.0
This boot image is already patched with magisk v23
Download here https://sourceforge.net/projects/genom-kernel/
Requirement:
Unlocked device with MIUI 12.5 and above
Howto install:
Reboot on fastboot
flash the famous empty vbmeta
fastboot --disable-verity --disable-verify flash vbmeta vbmeta.img
Click to expand...
Click to collapse
flash downloaded boot image
fastboot flash boot Genom-R-rosemary-BETA-2021xxxx-xxxx.img
Click to expand...
Click to collapse
and then
fastboot reboot
Click to expand...
Click to collapse
enjoy
Great
Ajayboglea said:
Good to see custom kernel but waiting for custom recovery eagerly.
Click to expand...
Click to collapse
Wait for recovery.. Its the main issue
Ajayboglea said:
But hope is only thing we can do
Click to expand...
Click to collapse
Genom kernel test antutu 318326, stock kernel 328545 ...
Yes Purimen, only 3% over, it's not a disaster
Renember: it's a beta !
murigny64 said:
Yes Purimen, only 3% over, it's not a disaster
Renember: it's a beta !
Click to expand...
Click to collapse
Eagerly awaiting for stable release
murigny64 said:
Yes Purimen, only 3% over, it's not a disaster
Renember: it's a beta !
Click to expand...
Click to collapse
Ok, Good luck developing the kernel
it's not mine, i just share
you can believe on it (on not)
Looking forward to the mature development of the kernel for this amazing SOC
My most important features for the powerful but hot g95 soc:
1. Temperature based sensible pre-throttling without dropping too low for low fps
2. Undervolting to determine what frequencies are stable for individual g95 SOCs and bins
3. Deep Sleep improvements with shorter delay and wakelock disabling
4. Taming the wild fluctuations in performance based on temperature with optimised kernel tweaking profile support using kernel tuning apps depending on the user's ambient temperature and graphics or cpu intensive workloads/ games
5. Last and most important - Battery Idle mode for bypassing the battery altogether unless absolutely necessary
You can send your request on rama982 github:
GitHub - rama982/kernel_xiaomi_rosemary: Custom kernel for Redmi Note 10S | Rosemary | Helio G95
Custom kernel for Redmi Note 10S | Rosemary | Helio G95 - GitHub - rama982/kernel_xiaomi_rosemary: Custom kernel for Redmi Note 10S | Rosemary | Helio G95
github.com
is it possible to remove video over sharpening with custom kernel
marcell39 said:
is it possible to remove video over sharpening with custom kernel
Click to expand...
Click to collapse
that's vendor related
Yes. Even without custom kernel.
[MIRAVISION] Steps to tweak or disable Mediatek MiraVision Hardware Video Decoder Over-processing™
Mediatek Miravision Hardware Video Decoding is found on several Mediatek Chipsets and vendors like Xiaomi design devices for users worldwide that neither allow nor show the settings to configure their media experience to their preference or...
forum.xda-developers.com
marcell39 said:
is it possible to remove video over sharpening with custom kernel
Click to expand...
Click to collapse
I'd just like to say thanks for this thread, without it I'd never have found the updated version of this Kernel! Genshin is running super nice on my phone now on the balance preset of gamebooster! (previously it would throttle hard and cause lots of stuttering, I played for about 50 minutes now without stuttering) I did not expect the stability difference between this and stock to be so huge!
edit: I also used this to root my phone since I was too lazy to make my own boot.img since magisk was already included in this
Checked the link and saw a monthly release till march 2022 since nov 21.
Can a changelog for each release be posted on this thread?
kenshinta said:
Checked the link and saw a monthly release till march 2022 since nov 21.
Can a changelog for each release be posted on this thread?
Click to expand...
Click to collapse
I doubt it since the creator of the Kernel is not the one that made this thread. I'm not sure about the changelog myself. I just used the latest one which is march 2022
edit: btw I love Rurouni kenshin
Cryptonite26 said:
/snip/
edit: btw I love Rurouni kenshin
Click to expand...
Click to collapse
I approve your taste!
Back to topic:
since I rooted, wanted to tweak kernel settings with smartpack kernel tweaker and noticed there is no "low memory killer" section.
Is this miui thing?
And would Genom have it back?
kenshinta said:
I approve your taste!
Back to topic:
since I rooted, wanted to tweak kernel settings with smartpack kernel tweaker and noticed there is no "low memory killer" section.
Is this miui thing?
And would Genom have it back?
Click to expand...
Click to collapse
I don't believe so, you could always use Smartpack to backup your current Kernel before trying out genom and just switch back if it doesn't yield better results when it comes to memory management, battery etc. I personally am not switching back to stock though, my battery is good, UI feels smoother and gaming is better with less overheating issues for me
this could all be moot though since MIUI 13 is confirmed to be ready for our device and is going to rollout very soon.
Where can I get a proper blank VBmeta?
As I never do anything related to vbmeta yet
I kinda confused with it
Does this file device based or cross device?
Edit: I found it
Related
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
Features
You get the usual set of well known tweaks, mods and other improvements. Please check commits of the source repo which will be mentioned below for detailed list of changes. The key ones are -
Live Kernel flashing with backup support for previous kernel - Liverepack implementation of @psych.half is used, which also backs up your previous kernel (boot.img) and other system files which would be changed.
KCAL - A well known display parameters calibration driver for MSM devices, written by @savoca.
Dynamic Fsync 1.2 - We all know what it is about, dont we? Credits - @faux123
ThunderPlug - A hotplug driver by @varun.chitre15.
Kernel Add-on support - For CM based ROM only. More about it in later posts.
More features will be eventually added.
Kernel Adiutor will list 90% of stuff that can be tweaked by the kernel, rest will be mentioned in further posts.
What does not work?
Various display tweaks by Xiaomi like Reading mode etc in MIUI ROMs - That is because Xiaomi did not open source that aspect of the kernel. The same will probably not work on any Kernel that is compiled from source. But thanks to KCAL, this tweaks can be worked around, check further posts.
Compatibility
This kernel is only meant to be flashed on lollipop based MIUI 7/8 ROMs.
This kernel is also compatible with Official CM and other similar source based ROMs.
Version naming
I gave up on maintaining proper versions of a kernel, its lot of hard-work. Instead, naming scheme of CyanogenMod and other prominent ROMs has been used, reflected in the zip naming. LOCAL_VERSION will be same for all versions hence we will talk about versions on date of build basis.
Installation
Make sure the ROM on which you are going to flash is compatible. Once done, simply flash it through TWRP.
Reporting Bugs
In case an error has occurred during flashing, please report it with /sdcard/liverepack.log.
In case of kernel errors, please get me a dmesg.
Feature Requests
I mainly focus on quality rather than quantity. But still, you can request a feature you would like and I will see what can be done.
Download - Here
If you want to download MIUI version, please download the file with no suffix (zd-20160803-kenzo.zip). Suffix will come in the next MIUI update.
If you want to download CM version, please download the file with cm suffix (zd-20150806-kenzo-cm.zip).
Add-ons can be found in Addons folder. Only CM based kernel supports Addons.
Source/ Tools used
Source - https://github.com/TeamButter/android_kernel_xiaomi_kenzo
Toolchain used - Aarch64 4.9 by google
XDA:DevDB Information
ZD Kernel, Kernel for the Xiaomi Redmi Note 3
Contributors
corphish
Kernel Special Features:
Version Information
Status: Stable
Created 2016-08-02
Last Updated 2016-08-06
Reserved
Kernel Addons
There are certain features which some people want in the kernel, whereas others do not want that at all (they even dont want the feature to be present in the kernel ).
So to meet the needs, we would have to maintain to separate kernel builds, one with the feature, one without it.
Which is where kernel add-on comes to play,
Here the users will need to flash the main kernel. Then, if they choose to, they can flash the kernel addon (which generally contains a feature).
If users choose not to, that feature wont be present at all (just as they wanted), whereas for those who flashed the addon, the feature will be present.
It makes lives of both us and users easier, right?
Addons are low in size flashable zips, as the name suggests. You will need to flash addons if you choose to, after flashing the kernel.
Only CM based ROMs support addons, as init.d support is needed, which is not present in MIUI.
Also, by distributing addons, I guarantee that no copyright infringements are made.
Addons available
-Thunderplug
Workaround for Xiaomi's display tweaks
We will use different values for tweaking offered by KCAL. To do that, open Kernel Adiutor and go to 'Screen' page.
Reading mode
Set Blue to 196.
Colour mode: Warm
Set Green to 240, Blue to 208
Colour mode: Cool
Set Red to 208.
You can also tweak contrast values and other stuffs.
If you are not satisfied, feel free to tweak similarly.
Thunderplug
For some reason, TZ app crashes on MIUI, and kernel adiutor does not fully have support for ThunderPlug.
By default, ThunderPlug does sched based hotplugging. Hence stuffs like endurance mode wont work as it only works when hotplugging is done on per-core basis.
To enable hotplug on per-core basis, open terminal and type:
Code:
su
echo 1 > /sys/kernel/thunderplug/hotplug_style
To go back to sched based hotplug:
Code:
su
echo 2 > /sys/kernel/thunderplug/hotplug_style
Reserved
Changelog
20160803
-Fixed -2% battery bug and camera bug on devices shipped with newer hardware.
20160802
-Initial release for MIUI ROMs
Wow, zapdos was my fav kernel on condor, let's see on kenzo xD
Flashed, no problems for now great work :good:
Working great here, thank you, I have one question, Did you implement Adreno idler? Because my gpu is going to 19mhz, and also Can you please explain the sched and per core mods of thunderplug? Thax
It has the bug of the battery of -2%
dmesg: http://pastebin.com/df8fBgme
donalberto17 said:
Working great here, thank you, I have one question, Did you implement Adreno idler? Because my gpu is going to 19mhz, and also Can you please explain the sched and per core mods of thunderplug? Thax
Click to expand...
Click to collapse
No Adreno idler is not implemented yet.
In sched based hotplugging, the load is shared among cores, there are no practical differences with the stock setup.
In per core basis of hotplugging, cpu cores are only plugged in when its really required, otherwise they are off.
mega-samu said:
It has the bug of the battery of -2%
dmesg: http://pastebin.com/df8fBgme
Click to expand...
Click to collapse
Alright, could you tell me when does this happen? When the battery is very low?
And looks like its a well known bug heh?
Ok thank you for your answer, based on your experience wich one it's better? Per-core or sched?
Waiting for CM version, nice work!
corphish said:
Alright, could you tell me when does this happen? When the battery is very low?
And looks like its a well known bug heh?
Click to expand...
Click to collapse
The mistake happens after flash the kernel. I think that it is for that xiaomi the new one put in indicator of battery, in the recent xiaomi.
I leave this post you, for if it can use you as help:
http://forum.xda-developers.com/redmi-note-3/how-to/fingerprint-battery-issues-custom-roms-t3429464
Well I discovered 2 bugs, when I change the style to per-core basis it doesnt stick after a reboot, another bug is when I change to per-core basis the Fingrepint sensor stops working
mega-samu said:
The mistake happens after flash the kernel. I think that it is for that xiaomi the new one put in indicator of battery, in the recent xiaomi.
I leave this post you, for if it can use you as help:
http://forum.xda-developers.com/redmi-note-3/how-to/fingerprint-battery-issues-custom-roms-t3429464
Click to expand...
Click to collapse
Ok. Have you flashed any other ROMs or kernel in which this issue isnt there.
Looks like xiaomi has done quite some changes in kernel since release.
donalberto17 said:
Well I discovered 2 bugs, when I change the style to per-core basis it doesnt stick after a reboot, another bug is when I change to per-core basis the Fingrepint sensor stops working
Click to expand...
Click to collapse
That change wont persist through reboot, you will have to do it everytime, or perhaps write an init.d script. Not any app supports this toggle which can provide set on boot.
And all I can make from this FP sensor issue when per core basis is it requires like all 6 cores to function, because in stock, I never saw any core go offline.
corphish said:
Ok. Have you flashed any other ROMs or kernel in which this issue isnt there.
Looks like xiaomi has done quite some changes in kernel since release.
Click to expand...
Click to collapse
In cm13 santosh with the patch camera fix or in mokee official, does not happen to me.
Nowadays I have the miui 8 of xiaomi.eu, that does not happen with the kernel stock either.
corphish said:
Ok. Have you flashed any other ROMs or kernel in which this issue isnt there.
Looks like xiaomi has done quite some changes in kernel since release.
Click to expand...
Click to collapse
I havn't tried your kernel but as i'm one of people with newer devices that have this problem, i can answer the question
mokee rom doesnt have this problem and the camera fix mentioned in here fixes the problem on CM maybe you can take a look and see what is the fix in that file.
mega-samu said:
In cm13 santosh with the patch camera fix or in mokee official, does not happen to me.
Nowadays I have the miui 8 of xiaomi.eu, that does not happen with the kernel stock either.
Click to expand...
Click to collapse
Alright, I am making a new build and will upload it as soon as its done.
Unfortunately I cant verify whether the battery bug is fixed or not.
Could you flash it and see then?
Thanks both of you for bringing this to my notice.
Let me know if there are any other breakages.
Edit
Here it is - https://www.androidfilehost.com/?fid=24659325368664523
Could you flash this and see? @mega-samu
corphish said:
Alright, I am making a new build and will upload it as soon as its done.
Unfortunately I cant verify whether the battery bug is fixed or not.
Could you flash it and see then?
Thanks both of you for bringing this to my notice.
Let me know if there are any other breakages.
Edit
Here it is - https://www.androidfilehost.com/?fid=24659325368664523
Could you flash this and see? @mega-samu
Click to expand...
Click to collapse
I have just proved it and it continues the bug.
Edit: The camera does not work
Edit2: In the kernel radon they finish of fix.: http://forum.xda-developers.com/redmi-note-3/development/kernel-t3414884/post68012485#post68012485
Enviado desde mi Redmi Note 3 mediante Tapatalk
mega-samu said:
I have just proved it and it continues the bug.
Edit: The camera does not work
Edit2: In the kernel radon they finish of fix.: http://forum.xda-developers.com/redmi-note-3/development/kernel-t3414884/post68012485#post68012485
Enviado desde mi Redmi Note 3 mediante Tapatalk
Click to expand...
Click to collapse
Alright, could you test yet another build soon?
Edit:
Here you go, this build has same name as previous one but they are different build, separately made and uploaded - https://www.androidfilehost.com/?fid=24591000424951734
Also check whether camera works fine or not @mega-samu
corphish said:
Workaround for Xiaomi's display tweaks
We will use different values for tweaking offered by KCAL. To do that, open Kernel Adiutor and go to 'Screen' page.
Reading mode
Set Blue to 196.
Colour mode: Warm
Set Green to 240, Blue to 208
Colour mode: Cool
Set Red to 208.
You can also tweak contrast values and other stuffs.
If you are not satisfied, feel free to tweak similarly.
Thunderplug
For some reason, TZ app crashes on MIUI, and kernel adiutor does not fully have support for ThunderPlug.
By default, ThunderPlug does sched based hotplugging. Hence stuffs like endurance mode wont work as it only works when hotplugging is done on per-core basis.
To enable hotplug on per-core basis, open terminal and type:
Code:
su
echo 1 > /sys/kernel/thunderplug/hotplug_style
To go back to sched based hotplug:
Code:
su
echo 2 > /sys/kernel/thunderplug/hotplug_style
Click to expand...
Click to collapse
if i change to echo1 fingerprint sensor is misbhaving ... one finger works other doenst and also a little bit of irresponsiveness
sasaboor64 said:
if i change to echo1 fingerprint sensor is misbhaving ... one finger works other doenst and also a little bit of irresponsiveness
Click to expand...
Click to collapse
Yeah I realized that.
Looks like all CPU cores are needed for it properly function.
As in stock all cpu cores are always on, I never saw anyone go off.
I might remove hotplug in next build.
Hi all.
Compatibility:
Builds starting with r1 are for Lineage OS 14.1 based roms.
Builds starting with r13 are also for Android Oreo 8.1.0 roms.
Download:
From my webserver choose the Kernel with the most recent version number. Older releases for older Android versions are in the parent directory:
Android 7.1.2: https://kernels.franco-lnx.net/RedmiNote3/7.1.2/anyKernel/
Android 8.1.0: https://kernels.franco-lnx.net/RedmiNote3/8.1.0/anyKernel/
or from my Updater app. It's just easier and more convenient:
https://play.google.com/store/apps/details?id=com.franco.kernel
Installation:
Flash the zip in your recovery
or
Auto-flash from Franco Kernel Updater app
Features:
1 - Legendary battery life
2 - Flash & forget
3 - Typical interfaces like display adjustments, sound control, vibration control, and all that boring stuff
4 - Bypasses the verified boot flag for Android Pay compatibility (root still breaks Android Pay but that's your own problem)
5 - Idle power consumption reduced to the absolute minimum (if you have wakelocks from 3rd party apps you're obviously on your own)
6 - Support for FKUpdater's Performance Profiles
7 - Magical support, I'm here every day, checking posts almost hourly, ready to help anytime (well, unless you fail to read the OP, which contains most info you need)
8 - Seemless integration with my app FKUpdater
9 - No useless placebo patches, or "magical" optimizations
10 - Probably more, check my github for all the details - the code speaks for itself
Changelog:
https://kernels.franco-lnx.net/RedmiNote3/7.1.2/appfiles/changelog
Source:
https://github.com/franciscofranco/kenzo
Follow me on the interwebs
Google+
Twitter
Google+ FK community
https://plus.google.com/u/0/communities/117966512071636110546
Franco Kernel: Manager & Updater demo
Disclaimer to moderators:
Slight OT is fine, but when users decide to act stupid they should be dealt with with the appropriate means - its really annoying for me when OT turns crazy. Please put the warning/ban hammer anytime any of you think there's lack of respect and/or too much unwanted OT crap - but if it doesn't meet this criteria let the OT posts alone. Thank you.
Cheers!
Full support on Franco Kernel Manager & Updater app has been released!
Also I'm pretty fresh on this device so if I missed anything let me know, if it makes sense I'll add it.
Any support for goodix users??
woww.. its great U also develop for kenzo..
Thankzz @franciscofranco..
ohh.. most popular cusrom 7.1.1 in kenzo is Nitrogen OS, this kernel support NOS also??
black dark man said:
Any support for goodix users??
Click to expand...
Click to collapse
I think I merged a patch for that: https://github.com/franciscofranco/kenzo/commit/ecf57ba53631cce978b847349e76994f695e180c
thank you, please support for Miui MM and LineageOS MM... and if you can, please look at xiaomi mi5 too, i hope you can make kernel for mi5. thanks
zilan said:
thank you, any support for Miui MM? and if you can, please look at xiaomi mi5 too, i hope you can make kernel for mi5.
Click to expand...
Click to collapse
Nope & nope.
Legend is here
Flashing now !!!
Yay Franco kernel for kenzo
Wow, legendary was here...
Ohh welcome to our community, I am at your disposal to give you the necessary information of our device so that you support is complete, thank you!
Finally!!!
Will post review soon, no issues till now
Recommend installing the stock kernel first before installing your kernel?
I'll post it now so that I can refer to it later on. Battery life greatly varies between usage, signal strength, apps wakelocking (or not), display brightness and what not. I've set it up to save power as much as possible, but there are parts of the equation that I don't control. So be wary of that before you say X or Y wastes more or less battery life (or the usual erhmagherd no deep sleep as if I removed it... lol). I don't have any numbers about the improvements I've made, but they are pretty much in line with every device I've worked on. If you have my app the Power-Saving perf profile is a winner and helps tremendously if you really need the extra screen on time.
Loopeez said:
Recommend installing the stock kernel first before installing your kernel?
Click to expand...
Click to collapse
If you're on other Kernel, yes, to make sure ramdisk etc is stock and clean.
Legend is here!!
Great
Tnx
The legend here :angel:
Yessss, Franco is here!
Any recommended settings?
Hello!
I want to introduce my first custom kernel for the Essential PH-1. This is based of several sources, I cherry-picked commits to make improvements to the stock LOS kernel. I'm not a developer, but i really like to port stuff over .
Kernel is suitable for AOSP based ROMS such as RR/AICP/CARBON/LOS etc... If you want to request for specific features, let me know and i'll do my best to bring them over.
Special Features:
Updated to lastest LOS Stock Kernel
Added a few governors like: cultivation / impulse
added a few IO Schedulers: Maple
Kcal Color Control driver
USB Fast Charge - pending will be added in R2
SafetyNet Patch (Bypass bootloader unlocked check)
Dynamic Fsync control
a little Overclock - will be added in R2
Motorola Quickwake - Will be added in R2
and manny other small fixes (you can check the commits in the sources)
Download
Disclaimer: I am not responsible if you use this and brick your device or if your device blows up, implodes, flames start shooting from it or it kills your neighbor's dog. Flash at your own risk. I am not responsible.... It was the other guy... I swear....
Latest Release: SMF-Kernel R2
Known issues:
05.17.2018 - CPU Freq don't always stick, known issue caused by other drivers. Phone will eventually set your frequencies, dont' panic.
Installation:
Obviouly you have a Unlocked Bootloader since you're running a custom rom (make sure to never lock your bootloader in this state)
Boot into Bootloader (adb reboot Bootloader)
If you want to root flash the "Magisk" version of the kernel, it's been prerooted with the latest Magisk Beta available.
Code:
fastboot flash boot SMF-Kernel-R1-Magisk.img
reboot
If you want to manually root, first flash twrp, then from twrp flash the 'non magisk' version and after that flash the magisk zip.
Special Thanks to:
jcadduono
franciscofranco
bedalus
lord_boeffla
flar2
sultanxda
...and many others from whom i cherry pick commits... Sorry if I forgot to mention anyone!
XDA:DevDB Information
SMF-KERNEL, Kernel for the Essential Phone
Contributors
jimbo77
Source Code: https://github.com/Jimbo77/android_kernel_essential_msm8998
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: R1
Stable Release Date: 2018-05-17
Created 2018-05-17
Last Updated 2018-05-17
Changelog 05.23.2018
Enabled Motorola QuickWake Driver - This will enable system to do checks or syncs without fully resuming the device, main objective is battery life.
Enabled Dynamic Sync Control by default
OverClock
USB Fast Charge to up 900ma (Original is 500ma)
Disabled Gentle Fair Sleepers
Enabled Boefla Wakelocks - Check the ammount of wakelocks you can block now!
Enabled Wireguard
Enabled several TCP Options - "Westwood" is enabled by default
Min/Max Brightness options is now configurable as well, to avoid the screen go too dim or to bright.
Somehow camera has been fixed! haha
Changelogs 05.17.218
Updated to lastest LOS Stock Kernel
Added a few governors like: cultivation / impulse
added a few IO Schedulers: Maple
Kcal Color Control driver
SafetyNet Patch (Bypass bootloader unlocked check)
Dynamic Fsync control
and manny other small fixes (you can check the commits in the sources)
Reserved
Looks awesome! I'll give it a try soon!
(For anyone wondering about overclocking the CPU, he committed some changes to the github that would apply this and it should appear in the next revision of the kernel.)
Just installed and so far it's buttery smooth.
WARpig5 said:
Just installed and so far it's buttery smooth.
Click to expand...
Click to collapse
I'm glad is running fine for you!
Good stuff, thanks for this! Could you tell me a little more about cultivation? I can't seem to find much information online about it
Also a request, if possible vibration level control would be super appreciated
pantherking said:
Good stuff, thanks for this! Could you tell me a little more about cultivation? I can't seem to find much information online about it
Also a request, if possible vibration level control would be super appreciated
Click to expand...
Click to collapse
I found Cultivation to be really great in terms of perfornance. It's a little bit agressive with the CPU so you get buttery smooth experience with Screen On but it may cost a few % on battery at the end of the day. The good thing is that it has specific tunables and you can set a low cpu freq for when the screen is off.
Specific details from its developer:
-based off of caf 4.4 commits
-uses per-pcu timers
-use state_notifier for screen off timer
option to set different timer rate when screen off
-improrted fastlane with threshold from blu_active
In regards of vibration control. It should be there. I'm using EX Kernel Manager and i can see the vibration option under "Miscellaneous"
jimbo77 said:
I'm glad is running fine for you!
Click to expand...
Click to collapse
Thanks for this. It's running amazing so far. Performance has been great and I'll see how battery life is, but so far it's great.
I can't wait for further updates. I really wanna see what Moto quickwake is haha
jimbo77 said:
In regards of vibration control. It should be there. I'm using EX Kernel Manager and i can see the vibration option under "Miscellaneous"
Click to expand...
Click to collapse
Thanks for the info on cultivation, I don't mind trading some battery life for butter so I'm using it now
For the vibration control, it doesn't actually work/stick. I've tried kernel auditor and EX Kernel Manager. To be fair, so far it has only worked on LOS and I think invisiblek may have rewritten the stock controller or something so no worries if it isn't a high priority haha
pantherking said:
Thanks for the info on cultivation, I don't mind trading some battery life for butter so I'm using it now
For the vibration control, it doesn't actually work/stick. I've tried kernel auditor and EX Kernel Manager. To be fair, so far it has only worked on LOS and I think invisiblek may have rewritten the stock controller or something so no worries if it isn't a high priority haha
Click to expand...
Click to collapse
I'll take a look at the latest commits but I've used the latest los kernel base so I'm not sure why is not sticking maybe it needs rom support too (not sure honestly) hahaha
I've been testing R2 since yesterday. Will update after y he weekend!
Just out of curiosity, was anything involving the camera done to this kernel? I am now able to record videos without the bug, on any of the affected ROMs, with this kernel.
stompysan said:
Just out of curiosity, was anything involving the camera done to this kernel? I am now able to record videos without the bug, on any of the affected ROMs, with this kernel.
Click to expand...
Click to collapse
Nothing related to camera. Are you sure it works with no issues?
What roms have you tested?
jimbo77 said:
Nothing related to camera. Are you sure it works with no issues?
What roms have you tested?
Click to expand...
Click to collapse
So far, AICP and LOS, both with Essential camera app and GCAM port, HD and 4K, 30 and 60 fps where applicable. Issues presented before flashing very consistently, and so far I have been unable to replicate after flashing this kernel.
stompysan said:
So far, AICP and LOS, both with Essential camera app and GCAM port, HD and 4K, 30 and 60 fps where applicable. Issues presented before flashing very consistently, and so far I have been unable to replicate after flashing this kernel.
Click to expand...
Click to collapse
Sp you were right. Honestly don't know what happened but I installed the latest RR (clean install) put R2 on top of it and bam recording works as you mentioned lol..
I guess it was a lucky strike!
after flashing the kernel with magisk, stuck on "AICP is starting"
is this normal?
update: the phone works but no magisk (pre root) after flashing the kernel.....
sinkoo1979 said:
after flashing the kernel with magisk, stuck on "AICP is starting"
is this normal?
update: the phone works but no magisk (pre root) after flashing the kernel.....
Click to expand...
Click to collapse
Hey!
Have you booted once and setup everything before flashing the prerooted image?
I've had that error but having all set and then flashing the image will get me rooted. Try to see if you can find magisk manager in the apps list from the settings if you do, reboot and there will be magisk
Double post... Sorry
jimbo77 said:
Hey!
Have you booted once and setup everything before flashing the prerooted image?
I've had that error but having all set and then flashing the image will get me rooted. Try to see if you can find magisk manager in the apps list from the settings if you do, reboot and there will be magisk
Click to expand...
Click to collapse
Thank you for the reply.
the phone was running AICP and I wanted root so I flash the kernel. I can't find the magisk manager or in the settings about magisk. I guess you have to clean install from the beginning to get the root. Thank you for the Kernel
sinkoo1979 said:
Thank you for the reply.
the phone was running AICP and I wanted root so I flash the kernel. I can't find the magisk manager or in the settings about magisk. I guess you have to clean install from the beginning to get the root. Thank you for the Kernel
Click to expand...
Click to collapse
Shouldn't. If you flashed the prerooted magisk image try downloading the magisk manager app manually from xda and see if magisk works
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
RZ Kernel aims for as stock experience as possible. It is made from Samsung's stock kernel with stability updates thanks to great guys who made ELS (exynos-linux-stable) branch
It also attempts to increase overall multitasking performance while maintaining good battery life with proper settings
Features
Adapted new Samsung EMS scheduler from Samsung 4.14 kernel (with 16ms PELT)
Gaming optimizations (reduce heat while maintaining performance stability)
Disabled battery-hogging WAKELOCKS
WireGuard and DriveDroid support
Security patch fixes adapted
Thanks to corsicanu for helping me with initial kernel support
XDA:DevDB Information
RZ Kernel, Kernel for the Samsung Galaxy S9
Contributors
remilia15
Source Code: https://github.com/diepquynh/android_kernel_samsung_universal9810
Kernel Special Features:
Version Information
Status: Testing
Created 2020-04-11
Last Updated 2020-08-27
Download link: Drive folder
CHANGELOG:
20200412: Initial release
20200823 [FINAL]: Post #10
Notices and Q&A
The kernel is based on tw10-android-4.9-q branch of ELS, which is currently at stable state from my experience
Other related features of the kernel were picked from other sources. Credits belong to the owner
The kernel's energy costs table is remade in favor of new EMS scheduler
Questions and Answers (Q&A)
Q: AnTuTu scores please?
A: This kernel isn't made for benchmarks so let's not talk about it
Q: My phone gets hot while using this kernel?
A: Short answer: It's your own issue, fix it yourself. Nobody makes a kernel just to burn your hands
Long answer:
Install Termux app from Play Store
Enable screen rotation, open Termux in landspace mode
Type this command: su -c top -d 2
A list of processes will appear and refresh with 2s interval. Find which process consumes the most CPU usage with [%CPU] column and the package name in ARGS column. You should see the culprit of your issue
Reminder: There is no such thing as "I have nothing in background but the phone still heats up". There definitely something happen and 99% of the time it's some of the rogue apps running in background
Q: Can you add X Y Z feature to this kernel?
A: I want to keep the kernel clean and simple. However, if the feature is really useful, I'll consider adapting it with proper performance check before releasing
Q: Installation procedure?
A: Simply flash the kernel with supported ROM and forget. No Magisk reinstallation needed
Reversed for future usage
Another kernel for S9 devices, awesome.?
Thanks
Updated initial release with latest defconfig base for DTC5 vendor
Limit of downloadings from google...
Hey. Will this kernel Work with dtc4 vendor?
Build kernel from scratch
I need help with building kernel outside of android build system.
I have downloaded sources from here: https://github.com/LineageOS/android..._universal9810 , installed cross-compiler, configured with "make exynos9810-starlte_defconfig", build with "make". For now I have file arch/arm64/boot/Image .
How to build correct dtb and pack it with the Image file to bootable image?
Thank you.
Second public build is coming, and this will be the final build of the kernel project!
We have been going through lots of ups and downs in the testing group, so here are the results
Changes:
Fixes zram on boot
Adapted a new kernel scheduler, supporting 32/64-bit task scheduling
Critical scheduler performance fixes
Adapted newer vendor support
As this is the final build of the whole kernel project, I'd like to say thank you to all supporters/developers who helped me improving the kernel. The whole project hasn't lasted long, but it was a great time. This and the RZ Kernel project for Exynos 8895 will also be abandoned, unfortunately
Once again, thank you for all your support!
remilia15 said:
Second public build is coming, and this will be the final build of the kernel project!
We have been going through lots of ups and downs in the testing group, so here are the results
Changes:
Fixes zram on boot
Adapted a new kernel scheduler, supporting 32/64-bit task scheduling
Critical scheduler performance fixes
Adapted newer vendor support
As this is the final build of the whole kernel project, I'd like to say thank you to all supporters/developers who helped me improving the kernel. The whole project hasn't lasted long, but it was a great time. This and the RZ Kernel project for Exynos 8895 will also be abandoned, unfortunately
Once again, thank you for all your support!
Click to expand...
Click to collapse
Arigathanks! I've been using the kernel for quite sometime and I like how it's underclocked by default. What device would you be moving to?
Sad to see such a nice kernel getting abandoned.
What needs to be done to keep it updated and relevant? Would love to keep it alive.
Using this kernel with havoc os, all is good as a daily driver battery life with this combo is awesome
Revontheus said:
Arigathanks! I've been using the kernel for quite sometime and I like how it's underclocked by default. What device would you be moving to?
Click to expand...
Click to collapse
I'm still using my daily driver (S8+) and currently don't have plans buying any other devices
BackToAndroid said:
Sad to see such a nice kernel getting abandoned.
What needs to be done to keep it updated and relevant? Would love to keep it alive.
Click to expand...
Click to collapse
Perhaps you can clone my kernel repo and do something with it. The most contemplating thing is to handle future vendor updates from Samsung. The kernel might go unbootable on latest One UI at some point, so someone must be doing the stock defconfig update (that's the least requirement to boot One UI ROMs with newer vendor)
Hmmm....Usually I can verify that the kernel has been installed by checking it's build date. But it still shows the same like before. I'm running official LOS and flashed the kernel in LOS recovery. According to the log it went fine. Maybe it doesn't work with that recovery?
Edit: Ok, in TWRP it works fine.
Anyone tried using with the latest vendor / security patch? I'm on Alexis ROM 1.8 would love to continue using this kenel.
BackToAndroid said:
Anyone tried using with the latest vendor / security patch? I'm on Alexis ROM 1.8 would love to continue using this kenel.
Click to expand...
Click to collapse
It works without issues for the most part except for USB C audio output which stutters compared to stock kernel.
BackToAndroid said:
Anyone tried using with the latest vendor / security patch? I'm on Alexis ROM 1.8 would love to continue using this kenel.
Click to expand...
Click to collapse
I tried it. Some tweaks not working like showing download speed and reverted back the old power menu (no emergency call) which is baked in the rom and the settings menu changes like 2 battery options in the menu. One is fixed at maximum power saving and cant change while another is on the device health or something which can be change. I also found that sometimes it ramps up the clocks without any reason i still manage to get 4.5-5.3hrs of sot with light usage. The chrome is unusable since it bugged out like its inverted color and cant see sh*t.
BackToAndroid said:
Anyone tried using with the latest vendor / security patch? I'm on Alexis ROM 1.8 would love to continue using this kenel.
Click to expand...
Click to collapse
Just flashed it - seems to work fine with 1.8
UweRammelt said:
Just flashed it - seems to work fine with 1.8
Click to expand...
Click to collapse
How was the standby drain? What twrp did you use? I used 3.4.0.0 of TWRP. The chrome is super dark and cant see. Can you confirm this or im an isolated case? Do you think its because of not using twrp 3.3.1.1 that bugged mine? Hope you can help me. Thanks!
Disclaimer: I am not responsible if you use this and brick your device or if your device blows up, implodes, flames start shooting from it or it kills your neighbor's dog. Flash at your own risk. I am not responsible.... It was the other guy... I swear....
ALWAYS BACKUP YOU’RE DATA BEFORE FLASHING.
This tutorial assumes you understand how to use adb and fastboot.
Your device’s bootloader has to be unlocked.
IMPORTANT NOTE: It seems some users need to flash a vbmeta image file provided by Google in order to boot and user the Custom Kernel. If you find yourself in a situation were you are not able to boot, please flash the attached vbmeta img along with the Kernel and if still bootlooping share the last_kmsg to determine what's driving the issue.
Download >> Link
Kernel Sources >>> Source
Join the Telegram Group for additional support - Link
Thanks to @afaneh92
Reserved
Change Log:
12/29/2021 -
BKLYN-Kernel-S21-Exynos-1.2.0
Upstreamed to 5.4.145
merge with G998BXXS3BULC/G998BXXS3BUL1 Kernel source
Improved backgroud apps running block
S21+ Support added.
12/11/2021 - Initial Set up more.
TTL Support added.
Wireguard Support added.
This will also work on android 11.
Hi, thank you for your work. Does this kernel has any battery optimizations in place?
bmonteiro said:
Hi, thank you for your work. Does this kernel has any battery optimizations in place?
Click to expand...
Click to collapse
Hi yes you can download the new version on my telegram which includes battery saver mod and background apps killer mod
bklyn_syed said:
Hi yes you can download the new version on my telegram which includes battery saver mod and background apps killer mod
Click to expand...
Click to collapse
Thank you, I'll try and report back.
@bklyn_syed
Just reporting back. I've been running version 1.0.5 (telegram) for about a day now and the change is very noticeable. The standby drain is minimal, I went to sleep with 89% and woke up with 86%, since A12 I was usually losing 8% during the night. The phone is also having less wakelocks caused by WiFi and bluetooth (I believe this is due to boefla's wakelock block implemented on the kernel), since a have a Watch connected to my phone 24/7 this really makes a difference.
Battery is also better and the animations are more consistent, everything I do now is more fluid. I'm running this on Dr. Ketan's ROM.
I would invite everyone running this ROM to test the kernel, at least for me I can't see me going back to stock kernel.
Thank you again for your work, and I'll be sure to donate when I receive my paycheck.
I just figured out rmnet also eats battery plan on fixing that with next update so it should be more stable
Hi Dev.
This installed and booted fine on BeyomdRom V1.9, Android 11.
Thank you.
Yw 1.0.7 up on telegram
Is it compatible with kcal?
vegetaleb said:
Is it compatible with kcal?
Click to expand...
Click to collapse
What is that?
If you have SM-G998B your bootloader is unlocked andriod 11 or 12 this kernel will work.
bklyn_syed said:
What is that?
If you have SM-G998B your bootloader is unlocked andriod 11 or 12 this kernel will work.
Click to expand...
Click to collapse
Kcal is an advanced colors control like rgb saturation
Is ther any plan to make kernel for S21+❤
vegetaleb said:
Kcal is an advanced colors control like rgb saturation
Click to expand...
Click to collapse
Aww yes I had that for my s20 ultra SM-G988U
Sahilrana7881 said:
Is ther any plan to make kernel for S21+❤
Click to expand...
Click to collapse
New kernel source has been upload, once I get the kernel up and running i'll update new source will be based on G998BXXU3BUK8.
SAMSUNG S21 SM-G998B
------------------------------------
BKLYN-Kernel-S21-Exynos-1.0.8
------------------------------------
Upstreamed to 5.4.136
------------------------------------
Kernel source updated. Download available in the download link
??