Question touch screen not work in custom rom,Recovery not wok too - Redmi 9 Power / 9T

MAYBE XIAOMI changed HW Ver?,or different BOM different regions?
touch screen not work in custom rom,Recovery not wok too
DEVICE: REDMI NOTE 9 4G CHN 8G128G
Board ID: PCBA _J19S_MP_CN
SCREEN : NT36672D
TEST ROM :Arrow-v11.0-juice-COMMUNITY-20210809
Bliss-v14.7-juice-OFFICIAL-gapps-20210924
crDroidAndroid-11.0-20210927-juice-v7.10
dotOS-R-v5.1.2-juice-GAPPS-20210718-1051
HyconOS_4.5.1_juice-11.0-20210914-0019-OFFICIAL
LegionOS-v3.13-juice-20210922-OFFICIAL-GAPPS
PixelBlaster_3.0_juice-11.0-20210910-0436-OFFICIAL
PixelExtended_juice-11.0-20210917-1223-OFFICIAL
TEST Recovery :OrangeFox-R11.1-Stable-Unofficial-juice
PBRP-juice-3.1.0-20210611-1144-OFFICIAL
TWRP
ONLY 1 recovery is work : QITU (7to.cn) a chinese TWRP MOD

Huyhoang1996 said:
Use twrp 3.5.2, if the touchscreen is not working in twrp. don't worry, press the power key a few times
twrp-3.5.2_10-3-lime-brigudav.zip | by Harry DS Alsyundawy for Redmi 9 Power / Redmi 9T
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Your screen is novatek type. when you installing custom rom touch will not work or work incorrectly. please install Kernel StormBrecker r3(lime) after installing custom rom
StormBreaker Kernel - Browse /citrus at SourceForge.net
sourceforge.net
Click to expand...
Click to collapse

new recovery (PBRP-juice-3.1.0-20211007-1519-OFFICIAL) run on NT36672D is OK !

onlyonce1 said:
new recovery (PBRP-juice-3.1.0-20211007-1519-OFFICIAL) run on NT36672D is OK !
Click to expand...
Click to collapse
Were you able to install a Custom Rom? Could you please tell me which one worked for you, or what kernel was used to make the touchscreen work in the ROM?

coffeemakerexpress said:
Were you able to install a Custom Rom? Could you please tell me which one worked for you, or what kernel was used to make the touchscreen work in the ROM?
Click to expand...
Click to collapse
I had try almost all CustomRoms. but no one work on my NOTE94G with NT36672D, I fell sad.

coffeemakerexpress said:
Were you able to install a Custom Rom? Could you please tell me which one worked for you, or what kernel was used to make the touchscreen work in the ROM?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
somehting new! in the 4PDA(https://4pda.to/forum/index.php?showtopic=1019190&st=2920),someone said crDroid 7.11 can work well

onlyonce1 said:
View attachment 5440011
somehting new! in the 4PDA(https://4pda.to/forum/index.php?showtopic=1019190&st=2920),someone said crDroid 7.11 can work well
Click to expand...
Click to collapse
Very interesting, thank you for this information!
If you try this crDroid 7.11, would you be so kind to give me a heads up if the touchscreen worked for you? I would appreciate this a lot.
I could try this myself, but the backup function in my recovery doesn't work for some reason. And I don't have time/patience to go through another full day of flashing roms back and forth, and then configure my entire phone again.

coffeemakerexpress said:
Very interesting, thank you for this information!
If you try this crDroid 7.11, would you be so kind to give me a heads up if the touchscreen worked for you? I would appreciate this a lot.
I could try this myself, but the backup function in my recovery doesn't work for some reason. And I don't have time/patience to go through another full day of flashing roms back and forth, and then configure my entire phone again.
Click to expand...
Click to collapse
It workes OK ,U can try it

coffeemakerexpress said:
Very interesting, thank you for this information!
If you try this crDroid 7.11, would you be so kind to give me a heads up if the touchscreen worked for you? I would appreciate this a lot.
I could try this myself, but the backup function in my recovery doesn't work for some reason. And I don't have time/patience to go through another full day of flashing roms back and forth, and then configure my entire phone again.
Click to expand...
Click to collapse
The new Kernel ,support NT36672D Chidori-Kernel-11-juice-20211024-1604.zip https://sourceforge.net/projects/exodusos/files/Chidori Kernel/juice/android-11/

On my device M2010J19SY I'm able to succesfully install only PB Recovery, but when trying to install Miui.EU got error: script aborted: E3004: This package is for "lime" devices; this is a "lemon".
Why PB sets device as lemon - how to change that?
Edit:
My phone codename is in fact a "lemon" - M2010J19SY
So, MIUI.EU is incompatible with this phone
I've changed name in rom istallation zip, but after install (with success), phone bots straight to recovery.

Hey there noogi, I just registered to post a reply regarding the codenames.
lemon, lime etc. are all part of the "juice" family of phones. You can flash most lime or juice roms on your M2010J19SY (lemon) device by using the codename changer within the tools section of Pitchblack Recovery. It's a temporary change and will revert back to "lemon" after a reboot, but the roms will flash and then boot just fine.

SunSpire said:
Hey there noogi, I just registered to post a reply regarding the codenames.
lemon, lime etc. are all part of the "juice" family of phones. You can flash most lime or juice roms on your M2010J19SY (lemon) device by using the codename changer within the tools section of Pitchblack Recovery. It's a temporary change and will revert back to "lemon" after a reboot, but the roms will flash and then boot just fine.
Click to expand...
Click to collapse
Hi. I have the same phone model like noogi (M2010J19SY) and i wait for bootloader to be unlocked (aprox 7 days) then i will try that metod with codename changer in Pitchblack Recovery. It is safe to flash a standard xiaomi rom or a modified one (custom rom), made for lime, if the hardware for lemon is diferent ? I don't want to brick it just out of the box. Noogi, please share your status with your phone/ installed roms. Thx.

HI,
I used PB recovery and after changing codename to lime I installed miui.eu. NFC and everything else works.

noogi said:
HI,
I used PB recovery and after changing codename to lime I installed miui.eu. NFC and everything else works.
Click to expand...
Click to collapse
Hi nonogi bear, problem solved.

if you don’t have kernels special for the nt36672d display, then use the kernel from crDroid 7.11 (gestures are not stable, I didn’t find any other problems. Works on many non-official firmware. a11, a12 work)

Related

[ROM] AOSP 6.0 - Qualcomm Factory ROM MM - Redmi Note 3 Pro - KENZO

Hello guys!! Finally i found out the factory ROM based on MM for Kenzo (Redmi Note 3 Pro)
THIS ROM AREN'T FOR NORMAL USAGE. VoLTE not working. Stop spam about VoLTE.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thx to @sasaboor64 for the screenshots
Thx to @sasaboor64 for this easy tutorial and thx to all the contributors for hard and fast working!!
1. Just extract this downloaded file somewhere (it will be around 1.5gb)
2. Boot device into fastboot mode
3. Open "8976_fastboot_all_images.bat" from extracted files. CAUTION: all data on INTERNAL STORAGE will b LOST
4.wait for rom to flash(reboots automatically)
if u need twrp now:
1. boot again into fastboot mode
2. Flash any twrp u like
Heres the link to the fastboot rom with decrypted package
https://www.androidfilehost.com/?fid=24694152805483468
Recovery ROM version: https://www.androidfilehost.com/?fid=24588232905723835
24/08/2016 26:16 P.M. UPDATE:
for unlock bootloader under this rom (working with official unlocked devices), boot the phone in fastboot and do
" fastboot oem unlock-go "
25/08/2016 15:27 P.M. UPDATE:
Mirror from DropBox by @sasaboor64 : https://www.dropbox.com/s/1hzp50fzwg7l1pt/mm_qualcom_kenzo.rar?dl=0
Decrypted Boot.img patched by @sasaboor64 : https://www.dropbox.com/s/pkr4rmv3iaqk2j0/Decrypted boot.img?dl=0
Please add credits if you do an fork or use part of this ROM. :good:​
finally!waiting for someone to confirm how it goes.
Any screenshots available, if its working? And please mention source of that file please
nothing in the folder
It is probably Global Beta 6.7.21, that was for short uploaded on MIUI forum by mistake. It was removed few minutes later. It is MM rom but only for developers internal testing.
If it's 6.7.21 Beta, ROM cannot be updated to later Beta versions (OTA is not supported)
http://forum.xda-developers.com/redmi-note-3/development/mm-global-dev-6-7-21-fastboot-rom-t3423895
Thanks a lot Naphtha.
Btw
Can you provide us a zip which can be flashed from the recovery? That would be really great.
Fastboot is too much trouble and will probably lock bootloader.
Sent from my Redmi Note 3 using Tapatalk
bluedolphin said:
It is probably Global Beta 6.7.21, that was for shot uploaded on MIUI forum by mistake. It was removed few minutes later. It is MM rom but only for developers internal testing.
If it's 6.7.21 Beta, ROM cannot be updated to later Beta versions (OTA is not supported)
http://forum.xda-developers.com/redmi-note-3/development/mm-global-dev-6-7-21-fastboot-rom-t3423895
Click to expand...
Click to collapse
No is the an pure version of Android builded by Qualcomm for Xiaomi. Read first of post thx
Why is Qualcomm building Roms for Xiaomi?
Anyone tried this rom?
Naphtha said:
Hello guys!! Finally i found out the factory ROM based on MM for Kenzo (Redmi Note 3 Pro)
Is flashable via fastboot:
https://mega.nz/#F!Q9dj2YyY!40fzQ7RpHH8Xi0XcSgRBrQ
Please add credits if you do an fork or use part of this ROM. :good:​
Click to expand...
Click to collapse
have u flash it?
if yes plz make twrp backup and upload so we can restore......
Is VoLTE working in this rom?
Also any flashing instructions??
Will this cause IMEI loss issue??
Ripbaria said:
have u flash it?
if yes plz make twrp backup and upload so we can restore......
Click to expand...
Click to collapse
I can't test it now because i haven't kenzo (is already shipped in this week i hope to got it), i decided to release it today, only because more people do some pressure for have it. :highfive:
Aadeep said:
Is VoLTE working in this rom?
Also any flashing instructions??
Will this cause IMEI loss issue??
Click to expand...
Click to collapse
Yes is possible, is untested
Naphtha said:
I can't test it now because i haven't kenzo (is already shipped in this week i hope to got it), i decided to release it today, only because more people do some pressure for have it. :highfive:
Click to expand...
Click to collapse
thanks waiting for it.......
Naphtha said:
Yes is possible, is untested
Click to expand...
Click to collapse
Flashed rom, Booted
Edit:
No Gapps, Old Icons
Aadeep said:
Flashed rom, Booted
Click to expand...
Click to collapse
Thanks for taking the risk, mate.
Aadeep said:
Flashed rom, Booted
Edit:
No Gapps, Old Icons
Click to expand...
Click to collapse
:highfive: is an factory ROM need to be cleaned :good: thx for sharing
Aadeep said:
Flashed rom, Booted
Edit:
No Gapps, Old Icons
Click to expand...
Click to collapse
So is it a clean aosp Qualcomm ROM based on marshmallow?
Any screens? Features?
Wysłane z mojego Redmi Note 3 przy użyciu Tapatalka
AravindhStanley said:
So is it a clean aosp Qualcomm ROM based on marshmallow?
Click to expand...
Click to collapse
Yep bro, just look build prop need to be cleaned from deveoping apps

[Morfuz Rom]

Hi guys this is Axan
I juts found a best and compelete and full feature rom for p9 lite
this is best rom i have seen
you can try it at least once
some features:
effects camera module that provides alive affects
3D music experience.
Rom download link:
https://mega.nz/#!RXpThLYA!kvYQGrcn519Muefbkxlnec0V3kQtOyFakMQNg5DvO-k
twrp download link:
https://mega.nz/#!sUBSBDrA!9kPvkYqQNeVOu2wP9gwgO14IDWjVHXH8LWdpNxBPL70
source rom :
http://catuva21.blogspot.com.es/2017/12/rom-morfuz-v71.html?m=1
My Telegram Channel for persian people:
http://t.me/Huawei_Help
this rom group:
https://t.me/joinchat/EO_zI0OxWB3oPBF1wE_7PQ
international telegram group:
https://t.me/joinchat/HH00UkNvNQYbZDjlDcrhHw
do not forget hit thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Wow, this ROM literally literated my point of view on ROMs, thank you for developing this ROM! The kernel is astounding, who could've ever thought of the name "TeamPhenom", or my now personal favourite AOSP-Based ROM, ""Morfuz"? Such a brilliant and excellently crafted ROM! Thanks alot! I am hoping to see VoLTE in the next update!
Hello mate, thanks for sharing. Are there any bug on the ROM like syncing bug? As I see there is kangvip and it was causing sync problem on other ROM.
uberstar100 said:
Wow, this ROM literally literated my point of view on ROMs, thank you for developing this ROM! The kernel is astounding, who could've ever thought of the name "TeamPhenom", or my now personal favourite AOSP-Based ROM, ""Morfuz"? Such a brilliant and excellently crafted ROM! Thanks alot! I am hoping to see VoLTE in the next update!
Click to expand...
Click to collapse
Welcome
But i didn't make it
In future maybe i will edit it and add some new features
I myself really like this rom
BloodNy said:
Hello mate, thanks for sharing. Are there any bug on the ROM like syncing bug? As I see there is kangvip and it was causing sync problem on other ROM.
Click to expand...
Click to collapse
See bro
I don't have that problem
Btw try it i hope be bugless for you too
Hey man. Thanks for sharing this amazing rom, it is so so so fast, and i always have about 900+ MB of ram ?? But i cant pass safety net, and i need to do that in order to login to Snapchat ? So any help?
Gvex95 said:
Hey man. Thanks for sharing this amazing rom, it is so so so fast, and i always have about 900+ MB of ram ?? But i cant pass safety net, and i need to do that in order to login to Snapchat ? So any help?
Click to expand...
Click to collapse
Sorry about this bro
I don't use magisk alot
But you can
Download and flash
Universal safetynet fix module for magisk
Also enable usb debugging
Hi. Just a quick question. I flashed the ROM. Everything is good but the sound isn't working. Anyone know how to fix?
jhorne917 said:
Hi. Just a quick question. I flashed the ROM. Everything is good but the sound isn't working. Anyone know how to fix?
Click to expand...
Click to collapse
What is you phone model???
This rom is just for p9 lite 2016
Axan said:
What is you phone model???
This rom is just for p9 lite 2016
Click to expand...
Click to collapse
Hi I'm using honor 6x. I had to flash the patch in the elite ROM thread and now sound is working. Thank you for your response though
jhorne917 said:
Hi I'm using honor 6x. I had to flash the patch in the elite ROM thread and now sound is working. Thank you for your response though
Click to expand...
Click to collapse
Good
Rom works good!
JensGoro said:
Rom works good!
Click to expand...
Click to collapse
Do not forget hit thanks button
Hi.. I'm right now on the crDroid Rom 3.5.0.. it's necessary flash the TWRP in this post? Or can I download and flash with the TWRP that I have?
Bashiix said:
Hi.. I'm right now on the crDroid Rom 3.5.0.. it's necessary flash the TWRP in this post? Or can I download and flash with the TWRP that I have?
Click to expand...
Click to collapse
I used the same twrp from the elite rom so yours will probably work too
dcduartee said:
I used the same twrp from the elite rom so yours will probably work too
Click to expand...
Click to collapse
I use the TWRP 3.1.1.1 and says openkirin edition with red letters.. you think I can flash anyway?
Very very fast rom. U flashed this rom with twrp new elite 3.2.1.0 and all good for now.
I did that too, it seems to be working fine. Except, i still have google sync issues, i came from elite rom v7.6 and tried this rom.
I wiped everything, formatted data, reflashed oeminfo voor vns-l31c432, and installed with no special add ons, but it still have problems with google apps. Did i miss something, how can i complete wipe so that really everything is gone? Is there a wipe level deeper than the wipe section in twrp?
This rom vs elite rom wich Rom is better?
it is already 'unticked'. The weird thing is, the google agenda does synchronize, but not the shared agenda, my own does work now. But i still feel that when i wipe i don't really remove everything from another rom...
The last thing is beacause the huawei themes aren't working?

[ROM] A11 ArrowOS [Garden] 29-12-2021 UNOFFICIAL

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm not responsible for damage made to your device
Click to expand...
Click to collapse
About:
ArrowOS is an AOSP based project started with the aim of keeping things simple, clean and neat. We added just the right and mostly used stuff that will be actually USEFUL at the end of the day, aiming to deliver smooth performance with better battery life.
Made for Garden (Redmi 9A/Redmi 9/Redmi 9C)
Installation Guide:
Flash MIUI Global 12.0.10 Via Fastboot (Or else, you are going to have issues with wifi)
Install PBRP 3.1.0 Garden
Boot into recovery (Power button + Vol up button until Redmi logo shows up)
Wipe data
Reboot recovery
Flash ROM
Flash GAPPS (Optional)
Reboot to system
Install Magisk (Optional)
Done
Download: https://drive.google.com/file/d/16_wiTK5mwZpb6oRZg3iv3iV7LRP0cTXD/view?usp=sharing
Sources:
ROM: https://github.com/ArrowOS/android_manifest
Device Tree: https://github.com/garden-dev/android_device_xiaomi_garden
Vendor: https://github.com/garden-dev/proprietary_vendor_xiaomi_garden
Kernel: Prebuilt on Device Tree
ROM SITE: https://arrowos.net/
PSA: You can search for more roms made for Garden on xda forums
Reserved
Wifi doesn't work. I used it as a base 12.0.10.0.
stefanhv said:
Wifi doesn't work. I used it as a base 12.0.10.0.
Click to expand...
Click to collapse
https://bigota.d.miui.com/V12.0.10.0.QCDMIXM/dandelion_global_images_V12.0.10.0.QCDMIXM_20210101.0000.00_10.0_global_f2a9e14284.tgz
this is the link in case you used another one.
can you verify it again, since almost nobody has this issue
yoshijulas said:
https://bigota.d.miui.com/V12.0.10....riť, pretože tento problém nemá takmer nikto
Click to expand...
Click to collapse
http://Thank you. I'll try again because I like this ROM
Screenshots?
Can somebody please tell me which Gapps I have to use? Do I need ARM or ARM64 Gapps? I've tried it with OpenGapps and others without succes. Thanks
RaidBuII said:
Can somebody please tell me which Gapps I have to use? Do I need ARM or ARM64 Gapps? I've tried it with OpenGapps and others without succes. Thanks
Click to expand...
Click to collapse
Arm Android 11
I use pico, but you can use what you like most
And i have used opengapps and works great, but there are others
ARM because the phone is 32 bits,
11/A11/R because this ROM its android 11
Pico because it only install the necesary to work, then you can download everything else on playstore
Okay, Gapps are working now, but I had to reboot to recovery again before flashing them, otherwise it says I'm on SDK 29.
I also have issues with WiFi, althoug I used the URL you supplied. Scanning WiFi networks is working, but I can't connect to them.
RaidBuII said:
Okay, Gapps are working now, but I had to reboot to recovery again before flashing them, otherwise it says I'm on SDK 29.
I also have issues with WiFi, althoug I used the URL you supplied. Scanning WiFi networks is working, but I can't connect to them.
Click to expand...
Click to collapse
you can see, but not connect to wifi?
yoshijulas said:
you can see, but not connect to wifi?
Click to expand...
Click to collapse
Yes Sir, even if i finish the installation process over mobile data/mobile internet and than try to connectto my WiFi, it doesn't work. There only stands "saved" under my network, but not "connected". Tried it a few times, to be shure I entered the right password, but didn't work.
Same issue when I use OrangeFox Recovery with the same Miui Build, before flashing ArrowOS.
so, you have that issue before installing this rom?
Interesting
yoshijulas said:
so, you have that issue before installing this rom?
Interesting
Click to expand...
Click to collapse
I only have that issue on CustomROMs, I've tried two so far... same problem. Can't conect to my WiFi already on the GAPPS setup. On StockROM it's working fine.
Will flashing v12.0.10.0.QCDMIXM with recovery file be as good as using the fastboot file?
Reyproject said:
Will flashing v12.0.10.0.QCDMIXM with recovery file be as good as using the fastboot file?
Click to expand...
Click to collapse
If the file inside have the vendor.img then yes, it will work
wifi is working fine, but I found gps issue. the dot become grey after first time I open maps and cannot follow my actual location.
ademeridien12 said:
wifi is working fine, but I found gps issue. the dot become grey after first time I open maps and cannot follow my actual location.
Click to expand...
Click to collapse
I have experience this with multiple ROMS, idk why happens, but get fixed by reinstalling ROM
What about calls, hotspot, android auto and bluetooth? Everything works?
Now,My Phone is MIUI Global 12.0.17 and can't downgrade to MIUI Global 12.0.10. Should i install this rom?
Yes

Question Mi 11 ultra /pro CHINESSE Stable Arrived!

Can i flash it with twrp?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have the same question. Anyone has experience installing ?
I'm very curious about this as well.
This popped up yesterday and contradicts our current knowledge about not being able to use TWRP for A12/Miui13. Hope that someone will shed some light on this.
As this is a stock recovery ROM, you need stock recovery to flash it.
Here you can find the fastboot version of Beta and Stable MiUi 13:
[PORT] BETA MIUI A12
Good afternoon The XD team (Xyen and Dargonswim) has managed to port the Chinese betas with Android 12 for anyone who wants to test it. You only need to have the bootloader open. Installation (FASTBOOT): - Enter fastboot mode (vol - and...
forum.xda-developers.com
I always used the fastboot version without any issues. But I read that TWRP 3.6 should be already able to flash also the normal "recovery" version. But didn't try myself until now.
RoughNeck1971 said:
Here you can find the fastboot version of Beta and Stable MiUi 13:
[PORT] BETA MIUI A12
Good afternoon The XD team (Xyen and Dargonswim) has managed to port the Chinese betas with Android 12 for anyone who wants to test it. You only need to have the bootloader open. Installation (FASTBOOT): - Enter fastboot mode (vol - and...
forum.xda-developers.com
I always used the fastboot version without any issues. But I read that TWRP 3.6 should be already able to flash also the normal "recovery" version. But didn't try myself until now.
Click to expand...
Click to collapse
ok, but the files you guys upload are 2 and not just one zip.. how can you flash this in een twrp then
That's a misunderstanding. The Fastboot Files are NOT for TWRP meant. The recovery files can be flashed through TWRP. The newest one for 22.1.5 is only one file. But still only Fastboot. You need to extract the contect of the "zip" - it will automatically extract also from z01. They are one archive split on 2 files. As I already mentioned the newest beta is now just one big file.
RoughNeck1971 said:
That's a misunderstanding. The Fastboot Files are NOT for TWRP meant. The recovery files can be flashed through TWRP. The newest one for 22.1.5 is only one file. But still only Fastboot. You need to extract the contect of the "zip" - it will automatically extract also from z01. They are one archive split on 2 files. As I already mentioned the newest beta is now just one big file.
Click to expand...
Click to collapse
Thx for info.
Ill wait to see how it will goes for you guys before i do anything
Its waiting on my phone i see, but no contact for a mirror
I downloaded the full rom, but my mi 11 ultra do not recognized the rom
thiagoserrao said:
I downloaded the full rom, but my mi 11 ultra do not recognized the rom
Click to expand...
Click to collapse
Did you use Fastboot instead of twrp?
all the new Roms can only be installed as fastboot Rom
I am having an issue.
Whenever I receive a call, Mi AI automatically turn on silent mode. Can some please suggest how to resolve this issue?
That changelog is ridicolous, you jump to a new version of the OS and of the custom and you get only a "improved system performance"?
xNAPx said:
That changelog is ridicolous, you jump to a new version of the OS and of the custom and you get only a "improved system performance"?
Click to expand...
Click to collapse
That's been the default for ages now
Indeed, ridicolous
Lots of bugs, many app will not work
speedtripler said:
That's been the default for ages now
Click to expand...
Click to collapse
We should complain. I sent them an email. All of us should do that. Freaking ridiculous.
You can do anything at all, just buy a normal global phone next time and not a phone with a rom.
I feel the same with a laggy mi 11 ultra and decide to sell it soon and never buy this again
BigDisplay said:
You can do anything at all, just buy a normal global phone next time and not a phone with a rom.
I feel the same with a laggy mi 11 ultra and decide to sell it soon and never buy this again
Click to expand...
Click to collapse
In fairness, the global version is overpriced in most countries especially if you want 12/512 etc
You can flash the global ROM tho
That should eradicate most of the issues with your Google apps etc
speedtripler said:
In fairness, the global version is overpriced in most countries especially if you want 12/512 etc
You can flash the global ROM tho
That should eradicate most of the issues with your Google apps etc
Click to expand...
Click to collapse
Hey
Thx... But i have the "global" stable rom (12.5.20)you talking about... Unless??

[ISSUE] Bootloop after trying to root Redmi 8 with Magisk

Hi everyone, recently i've tried to flash a custom recovery (TWRP) and a custom rom (pixel experience) on my Redmi 8.
But after succesfully installing them, i noticed that there were lots of cool things you could do with a rooted phone.
So, i decided to install Magisk (v25.2) on it.
After the setup was done, it would go to bootloop, so, i recovered it by flashing the boot image of the rom i was using (still pixel experience) and it worked!
My phone went back to normal, but i still want to install Magisk.
Everytime i try to install it, the same thing happens over and over.
Can someone help me please?
Thank you.
there may be a bunch of incompatibilities
which twrp and rom version? there are many not posted here, and solutions as well
fonzacus said:
there may be a bunch of incompatibilities
which twrp and rom version? there are many not posted here, and solutions as well
Click to expand...
Click to collapse
so... what can i do?
give links to each twrp and rom version? i did ask which
also some pixexp tend to not boot when rooted or changed kernels, you might be using 1 of em
fonzacus said:
give links to each twrp and rom version? i did ask which
also some pixexp tend to not boot when rooted or changed kernels, you might be using 1 of em
Click to expand...
Click to collapse
TWRP version:
twrp-3.7.0_12-0-mi439
Download TWRP for mi439
Download TWRP Open Recovery for mi439
dl.twrp.me
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM version: TP1A.221005.002PixelExperience_mi439-13.0-BETA-20221017-0634-OFFICIAL
Xiaomi Redmi 8 / 8A / 8A Dual (mi439) - PixelExperience
Xiaomi Redmi 8 / 8A / 8A Dual (mi439) - PixelExperience
download.pixelexperience.org
iirc this version of pix exp should be able to use root and change kernels, it was another version that was picky. did you try an older magisk version? which pix exp were you having probs with?
you prolly got this rom from elsewhere right?
sadly most mi439 users arent active on the xda, and typically on telegram
fonzacus said:
iirc this version of pix exp should be able to use root and change kernels, it was another version that was picky. did you try an older magisk version? which pix exp were you having probs with?
you prolly got this rom from elsewhere right?
sadly most mi439 users arent active on the xda, and typically on telegram
Click to expand...
Click to collapse
Sorry, I don't understand, what do you mean by "you got this ROM from elsewhere right?"
I got this ROM from the official site of pix exp.
where did you see a posting of this rom? i dont think its posted in this olive subforum, and the dev (shield) is an lite+wood dev
the term mi439 isnt really recognized here, but its gaining recognition (like most roms, and even on twrp) :3
fonzacus said:
where did you see a posting of this rom? i dont think its posted in this olive subforum, and the dev (shield) is an lite+wood dev
Click to expand...
Click to collapse
I wanted to make my phone much faster and better, so i searched through various custom ROMs videos and thought that this was the best for my needs (in fact it has everything I needed).
I decided to go to the official site and install it, and now i have it on my phone.

Categories

Resources