Database Develop

GPG Galaxy One Click v1.0

Program Name: GPG Galaxy One Click
Version Number: 1.0
Program Profile:
Recovery Menu installed and routed in one click.
Installing Other Programs
Go to recovery mode and Danlvdyng with one click.
Easy to use adb commands in the program.
Method of application:
For recovery and rooted to the phone, the phone is turned on when you connect, you should press button Reboot Down Mod Downloading go to phone mode. Or you can get down volume buttons and the Home button and pressing the power button, use the phone to Downloading.
Now hit the Start button on the phone is installed in the kernel file. (You can change the kernel file.)
Open apk files to install the button and select the apk file, then click the Install apk file to be installed on the phone.
Instructions for using adb, Kamnd Edith enter your destination, then click Start Command. To see the result.
Download:
This is a smaller version, GPG is a gift from the company. Next version I'll put all of your needs for this push. Including: blinker, unlock, repair and serial .....
You win

[Q]LG optimus 4x p-880 IS11LG_systembackup test.signed.apk

I really appreciate any help,
I tried to root my phone, followed the steps here:
http://forum.xda-developers.com/show...45863425638526
I got to step 7., where I wanted to open the app , but all I got was: Unfortunately SystemBackupTest has stopped. How can I fix it ? Knowing that none of lg optimus 4x users faced this problem on most of the internet forums.
A screenshot is attached

the page you included in post is not found!!!
anyways man download this file and follow steps to root!! SAFE i guess u dont need to backup!!
1. Download and install the necessary First you need USB driver for your PC or Laptop to connect your phone. So, grab the LG USB driver and install it on PC.
2.Turn the phone off, press the “volume down” and “power” key to boot, do not release the volume down key until the screen appears with a red triangle robot.
3 Insert the USB connected to the computer, use the “volume” down select “Apply update from ADB, press the power button to determine two lines of yellow text prompts.
4 Double-click ROOT.BAT (PC)
5. Wait until the installation is complete, the phone to return to the menu cursor restart items, press the power button to restart the phone.
6. A Superuser icon appears on the phone, running “information page, click here to check for updates, connect to the network, mandatory update
hope that helps ,,, View attachment 2078934

vieri_202 said:
the page you included in post is not found!!!
anyways man download this file and follow steps to root!! SAFE i guess u dont need to backup!!
1. Download and install the necessary First you need USB driver for your PC or Laptop to connect your phone. So, grab the LG USB driver and install it on PC.
2.Turn the phone off, press the “volume down” and “power” key to boot, do not release the volume down key until the screen appears with a red triangle robot.
3 Insert the USB connected to the computer, use the “volume” down select “Apply update from ADB, press the power button to determine two lines of yellow text prompts.
4 Double-click ROOT.BAT (PC)
5. Wait until the installation is complete, the phone to return to the menu cursor restart items, press the power button to restart the phone.
6. A Superuser icon appears on the phone, running “information page, click here to check for updates, connect to the network, mandatory update
hope that helps ,,, View attachment 2078934
Click to expand...
Click to collapse
The link is :
http://forum.xda-developers.com/showthread.php?t=1818502&nocache=1&z=3345863425638526
nevermind it's ok

vieri_202 said:
the page you included in post is not found!!!
anyways man download this file and follow steps to root!! SAFE i guess u dont need to backup!!
1. Download and install the necessary First you need USB driver for your PC or Laptop to connect your phone. So, grab the LG USB driver and install it on PC.
2.Turn the phone off, press the “volume down” and “power” key to boot, do not release the volume down key until the screen appears with a red triangle robot.
3 Insert the USB connected to the computer, use the “volume” down select “Apply update from ADB, press the power button to determine two lines of yellow text prompts.
4 Double-click ROOT.BAT (PC)
5. Wait until the installation is complete, the phone to return to the menu cursor restart items, press the power button to restart the phone.
6. A Superuser icon appears on the phone, running “information page, click here to check for updates, connect to the network, mandatory update
hope that helps ,,, View attachment 2078934
Click to expand...
Click to collapse
Thanks alot !! :good: :good: :good: I really really appreciate it !! I searched so much on the web before I posted and none was helpful, you should make a post explaining this method and giving it a good tag so it go on the top google search*
I really thankful

[Asus ME170C] How to Fix Bootloop problem Flashing via ADB Sideload

Preparing Tools:
Intel USB Driver for Android
ADB Fastboot Tool 1.0.32
Asus MemoPad 7 Firmware (Download From the Asus website, and Put it in the same folder with fastboot adb tools)
1. Turn off your tablet
2. Go to FastBoot mode by pressing power + volume down, then the android logo should appear (Move in the menu with Volume Up and Volume Down, then press On Button to enter), then apply update from ADB option (Or enter in Recovery and then apply update from ADB option)
3 .Connect your tablet with USB Cable to your PC/laptop
4. Open command prompt in Windows (Shift + Right Click) (in the same folder where ADB is located)
5. Check connection by type <adb devices> (Without <>) if connection successful will be a list of devices
6. Type <adb sideload file.zip> (Without <>) (file.zip=adjust the filename, Asus firmware that you download earlier)
7. Wait until the process is complete
8. The tablet will flash to clean thoroughly
This method can be used to downgrade , or that an error during install root ( root will disappear completely )
I use the last firmware "UL-K017-WW-12.8.1.33-user" Lollipop 5.0 This is the only one that worked for me.
After flashing , the device may take about 10 minutes to start.
If you see sleep Android Robot Error in the Recovery Mode , Press Power button and hold it, then press Volume up, after one second you will see yellows words, just wait until the recovery menú appears.
My mother tongue is Spanish, sorry if I have some errors. Have a nice day.

Hello
I live in Colombia and i have the Asus Memo Pad 7 ME170C, i proved very much metods to restar my tab, but not works, i can enter in droidboot, i download this: UL-K017-WW-11.2.3.18.2-user, UL-K017-WW-11.2.3.28-user, UL-K017-WW-12.8.1.33-user. Anything works. always say error, the android is lying and red triangle, i proved the metod to restart for fastboot, flash the boot, flashboot and splashscreen, and upload for sd card and not works.
please help me. i'm soy for my english i talk spanish

NESSY24 said:
Hello
I live in Colombia and i have the Asus Memo Pad 7 ME170C, i proved very much metods to restar my tab, but not works, i can enter in droidboot, i download this: UL-K017-WW-11.2.3.18.2-user, UL-K017-WW-11.2.3.28-user, UL-K017-WW-12.8.1.33-user. Anything works. always say error, the android is lying and red triangle, i proved the metod to restart for fastboot, flash the boot, flashboot and splashscreen, and upload for sd card and not works.
please help me. i'm soy for my english i talk spanish
Click to expand...
Click to collapse
Send me an Email to Luis.ZK.97 @ gmail . com.
I´m gonna try help you in spanish, is more easy for you and me.

need help, installing ota zip to my nexus 6

Hello guys,
i was following this article, from yahoo, i cannot post it
and reached the point of
The fastboot menu will appear and you should see Start in the top right. Press Volume Up till it changes to Recovery. Press the Power button to select it.
You will see an Android with a red exclamation point icon, press and hold the Power key, then press the Volume up key to show the Recovery Menu.
You will get a new menu. Navigate to apply update from adb and select it by pressing the Power button.
but it says this in the cmd
device <null> NOT attached.
the phone is still connected, what do i do now?
please help

hendyanto said:
Hello guys,
i was following this article, from yahoo, i cannot post it
and reached the point of
The fastboot menu will appear and you should see Start in the top right. Press Volume Up till it changes to Recovery. Press the Power button to select it.
You will see an Android with a red exclamation point icon, press and hold the Power key, then press the Volume up key to show the Recovery Menu.
You will get a new menu. Navigate to apply update from adb and select it by pressing the Power button.
but it says this in the cmd
device <null> NOT attached.
the phone is still connected, what do i do now?
please help
Click to expand...
Click to collapse
Where does it say this and at what point? Your phone is 100% stock then, correct? You set up adb correctly?
We'll need more information than supplied. You should walk us through step by step

hendyanto said:
Hello guys,
i was following this article, from yahoo, i cannot post it
and reached the point of
The fastboot menu will appear and you should see Start in the top right. Press Volume Up till it changes to Recovery. Press the Power button to select it.
You will see an Android with a red exclamation point icon, press and hold the Power key, then press the Volume up key to show the Recovery Menu.
You will get a new menu. Navigate to apply update from adb and select it by pressing the Power button.
but it says this in the cmd
device <null> NOT attached.
the phone is still connected, what do i do now?
please help
Click to expand...
Click to collapse
I was having the exact same problem last night, following the same instructions. I still could not figure out how to sideload the OTA, so I ended up just flashing the update and starting from fresh. Wish I had the answer for you.
Here was my thread asking pretty much the same thing: http://forum.xda-developers.com/nexus-6/help/disconnects-computer-entering-bootloader-t3230705

danarama said:
Where does it say this and at what point? Your phone is 100% stock then, correct? You set up adb correctly?
We'll need more information than supplied. You should walk us through step by step
Click to expand...
Click to collapse
100% Stock, yes! 1 week old.
Yes i have set up ADB
I have followed the instruction until this part (i cannot post any link sorry, not authorized by xda)
The following ADB commands are for Windows machines. If you’re using a Mac, just add “./” before each command, for example: “./adb reboot bootloader”.
Assuming you device is already connected to your computer via USB and USB Debugging is enabled, you need to re-start it in fastboot mode. Follow one of the two methods below. Option A may be preferable because it’s another confirmation that your computer recognizes your Nexus device.
A) Type “adb reboot bootloader”
B) Turn your device off, then turn it back on while holding down the relevant key combinations for your device. For many devices it’s Volume Up + Volume Down + Power. You can see what your device’s key combinations are here.
The fastboot menu will appear and you should see Start in the top right. Press Volume Up till it changes to Recovery. Press the Power button to select it.
You will see an Android with a red exclamation point icon, press and hold the Power key, then press the Volume up key to show the Recovery Menu.
You will get a new menu. Navigate to apply update from adb and select it by pressing the Power button.
In the command window — make sure you are in the directory where ADB and Fastboot reside — type: “adb sideload [the full name of the file].zip” without the brackets around the file name.
The update will install and reach 100 percent.
Reboot and enjoy the latest version of Android Marshmallow.
Click to expand...
Click to collapse
(red arrow) and then the cmd says the null error, i am trying this now
I had the same problem. Turned MTP on and then it worked. You're told to turn it off but don't... Its in Settings-Storage-touch the ... Menu top right corner, USB settings and turn ON MTP mode. It worked well for me. I also used the Nexus Root Toolkit - makes things much easier!
Click to expand...
Click to collapse
My phone is able to rebooot (the options comes out sometimes after i did not do anything) and now optimising app (like it usually did after an OTA update)

hendyanto said:
100% Stock, yes! 1 week old.
Yes i have set up ADB
I have followed the instruction until this part (i cannot post any link sorry, not authorized by xda)
(red arrow) and then the cmd says the null error, i am trying this now
My phone is able to rebooot (the options comes out sometimes after i did not do anything) and now optimising app (like it usually did after an OTA update)
Click to expand...
Click to collapse
There are lots of additional steps in that guide and not always the simplest way of doing it.
First thing to do is boot into recovery.
- Turn off the phone.
- Hold volume down + power
- At the bootloader screen, use volume keys to navigate to recovery and press power to select#
- At the Red warning triangle, hold power then press volume up.
At this stage, type "adb devices" in your command prompt and see if it returns your serial number or not. If it does, you can follow the steps to use adb to flash the update.
Please note, the guide talks about USB debugging. This only works in android. Nothing you need to do needs to be done via android so this is nonsense. Also the MTP option only works in android, so setting this in settings as a fix is also nonsense.

danarama said:
There are lots of additional steps in that guide and not always the simplest way of doing it.
First thing to do is boot into recovery.
- Turn off the phone.
- Hold volume down + power
- At the bootloader screen, use volume keys to navigate to recovery and press power to select#
- At the Red warning triangle, hold power then press volume up.
At this stage, type "adb devices" in your command prompt and see if it returns your serial number or not. If it does, you can follow the steps to use adb to flash the update.
Please note, the guide talks about USB debugging. This only works in android. Nothing you need to do needs to be done via android so this is nonsense. Also the MTP option only works in android, so setting this in settings as a fix is also nonsense.
Click to expand...
Click to collapse
I cannot get my windows to detect the phone during recovery mode, it always disconnected at that point.
I'll try again when i have the time, thank you all.

hendyanto said:
I cannot get my windows to detect the phone during recovery mode, it always disconnected at that point.
I'll try again when i have the time, thank you all.
Click to expand...
Click to collapse
Could be a driver issue. You'll need to check device manager. Perhaps uninstall the existing drivers and let it auto detect.
Failing that, install the Naked driver from my adb and fastboot thread (Nexus 6 general > Sticky roll-up thread > Adb and fastboot. What is it?)

I had the same issue with you until i did the following: I used wugfresh's nexus utility. Then I downloaded the respective file from XDA and saved it in the same folder as the Wugfresh's tool. Restarted in Recovery mode and chose 'update from adb'. Connected the phone with the usb having USB debugging on from before going to recovery. Started the CMD window from Wugfresh's tool (Advanced Utilities -> Launch) and check that the phone is connected (I think "adb devices") . Then "adb sideload xxxx.zip" and waited for the process to finish.
Instruction here: androidpolice 2012/11/13/android-4-2-build-jop40c-rolling-out-to-the-nexus-7-now-manual-download-link-available/
You do not have to install the full Android utility. Just use wugfresh;s cmd screen. Good luck!

danarama said:
Could be a driver issue. You'll need to check device manager. Perhaps uninstall the existing drivers and let it auto detect.
Failing that, install the Naked driver from my adb and fastboot thread (Nexus 6 general > Sticky roll-up thread > Adb and fastboot. What is it?)
Click to expand...
Click to collapse
qwerty1gr said:
I had the same issue with you until i did the following: I used wugfresh's nexus utility. Then I downloaded the respective file from XDA and saved it in the same folder as the Wugfresh's tool. Restarted in Recovery mode and chose 'update from adb'. Connected the phone with the usb having USB debugging on from before going to recovery. Started the CMD window from Wugfresh's tool (Advanced Utilities -> Launch) and check that the phone is connected (I think "adb devices") . Then "adb sideload xxxx.zip" and waited for the process to finish.
Instruction here: androidpolice 2012/11/13/android-4-2-build-jop40c-rolling-out-to-the-nexus-7-now-manual-download-link-available/
You do not have to install the full Android utility. Just use wugfresh;s cmd screen. Good luck!
Click to expand...
Click to collapse
Thank you guys! But after this "happy"night, i woke up to the OTA for marshmallow arrived on my phone, so see you guys on the rooting section instead, Thank you thank you for the help

[SOLVED] Can't enter safe mode

The phone doesn't start after installing EdXposed and the Riru Core Magisk module.
I want to enter Safe mode, but it doesn't work. I somehow managed to enter safe mode previously out of pure coincidence (no idea what I did, I pressed some buttons and i got there during a boot sequence, but it was nothing like the tutorial that Google gives you on how to do it properly).
So, I read you can do it like this:
https://support.google.com/pixelphone/answer/2852139?hl=en
However, this doesn't work for me, here's my boot process:
Power on
Unlocked bootloader warning (I skip it)
Google logo shows up
Screen color calibration changes slightly
Google animation starts (i press volume down)
Google animation ends
Normal Google logo stays there for a few seconds
Loading bar appears
Loading bar stayed there overnight (phone doesn't get hot or anything)
Is there any way to:
Enter safe mode properly
Start a terminal in recovery mode (like TWRP) to use the mm module to disable Magisk
Have an on device file manager (like TWRP) to manually delete the app
Delete files using adb
Get a normal adb shell (not sideload)
EDIT 1:
Starting "rescue mode" via fastboot shows the bootloader warning again, then the Google logo and then it's stuck (no color shift, no animation). Same for "recovery mode".
I cannot connect via adb/fastboot while the Logo is showing.
EDIT 2:
I managed to start "rescue mode" by doing the following:
Press power button
Press power button again (Entry selected: "Start")
Press both volume buttons and don't release them (I'm getting desperate here lol)
Bootloader warning (not skipped)
Rescue mode shows up (opened up Android, says "No command")
I can connect via adb, but "adb shell" or any other useful command says "error: closed"
EDIT 3:
Wtf, I got an adb shell by doing the following inside rescue mode:
"adb shell" -> Error
"adb pull /system/" -> Error
"adb pull /etc/hosts" -> Error
Phone restarted
Bootloader warning (skipped it)
Google logo, Animation & loading bar
adb connected
EDIT 4:
I entered the adb shell and used "setprop persist.sys.safemode 1" (source) (which registered correctly), but after rebooting, the phone still loads forever.
EDIT 5:
Turns out Safe mode didn't work because of Magisk/Riru/EdExposed or whatever, so I disabled Magisk by "touch /cache/.disable_magisk" (source) and now I successfully booted into safe mode.

Can you type up a more coherent guide to what you did? I'm facing the same problem and hoping to fix it without having to wipe my phone again! Thanks!

cubsrule93 said:
Can you type up a more coherent guide to what you did? I'm facing the same problem and hoping to fix it without having to wipe my phone again! Thanks!
Click to expand...
Click to collapse
Using this will most likely get you booted up to fix what you need...
https://forum.xda-developers.com/pixel-4-xl/themes/magisk-modules-disabler-booting-magisk-t3990557

cubsrule93 said:
Can you type up a more coherent guide to what you did? I'm facing the same problem and hoping to fix it without having to wipe my phone again! Thanks!
Click to expand...
Click to collapse
Where are you stuck?