Database Develop

Stock Rom

Hi
Were can I download stock ROM?
Skickat från min HUAWEI CRR-L09 via Tapatalk 2

@bajen
CRR-L09 B114 Firmware Full version: http://www.huaweiblog.de/huawei_firmware_downloads/huawei-mate-s-downloads/

ml_taz said:
@bajen
CRR-L09 B114 Firmware Full version: http://www.huaweiblog.de/huawei_firmware_downloads/huawei-mate-s-downloads/
Click to expand...
Click to collapse
Is this an international version?
Is this an English Version?

@wolfman66
Firmware is for CRR-L09. All languages are included. I think CUST Version depends on current install. For Default it is CUST432 (WEU).

Do you know if this update erase all?
Skickat från min HUAWEI CRR-L09

bajen said:
Do you know if this update erase all?
Skickat från min HUAWEI CRR-L09
Click to expand...
Click to collapse
Answer: No
Skickat från min HUAWEI CRR-L09

how to i flash original recovery after flashing twrp`?

superior888 said:
how to i flash original recovery after flashing twrp`?
Click to expand...
Click to collapse
Hi
I assume you have the stock firmware file for your device?
Use Huaweiupdateextractor to extract the update.APP file. (Search on Google for this app if you do not have it.)
Once you see the files on the screen, right click on the recovery file and choose "extract this file". Choose to extract to the same folder where you have saved your twrp recovery file.
Connect phone to PC. Navigate to that folder where the file is saved.
Hold down the shift key and right click anywhere in that window. Select "open command prompt".
Type:
adb reboot bootloader
fastboot flash recovery recovery.img
fastboot reboot
This will revert you to the stock recovery
If you do not have the stock rom version or if you are unable to follow the procedure above, I have attached the recovery.img (in zip format) file for the B114 firmware version. you are welcome to use it but, be warned, I WILL NOT BE HELD RESPONSIBLE IF THIS FILE IS INCOMPATIBLE WITH YOUR DEVICE

wolfman66 said:
Hi
I assume you have the stock firmware file for your device?
Use Huaweiupdateextractor to extract the update.APP file. (Search on Google for this app if you do not have it.)
Once you see the files on the screen, right click on the recovery file and choose "extract this file". Choose to extract to the same folder where you have saved your twrp recovery file.
Connect phone to PC. Navigate to that folder where the file is saved.
Hold down the shift key and right click anywhere in that window. Select "open command prompt".
Type:
adb reboot bootloader
fastboot flash recovery recovery.img
fastboot reboot
This will revert you to the stock recovery
If you do not have the stock rom version or if you are unable to follow the procedure above, I have attached the recovery.img (in zip format) file for the B114 firmware version. you are welcome to use it but, be warned, I WILL NOT BE HELD RESPONSIBLE IF THIS FILE IS INCOMPATIBLE WITH YOUR DEVICE
Click to expand...
Click to collapse
Thank you. Im prepearing for root. Just need to unlock the bootloader. hmm.
do you think we will see custom roms in the near future. I'm not coming to sense with the lock screen not showing all notifications and like spotify controls.

How to flash ? With TWRP ? If not ,tutorial please
I am stuck at boot logo ,how to flash via APPUPDATE then ? Cant get in the phone.
Twrp and Fasboot no problem ,Can also get into stock recovery.
Any sollution ?
Thanks

wolfman66 said:
Hi
I assume you have the stock firmware file for your device?
Use Huaweiupdateextractor to extract the update.APP file. (Search on Google for this app if you do not have it.)
Once you see the files on the screen, right click on the recovery file and choose "extract this file". Choose to extract to the same folder where you have saved your twrp recovery file.
Connect phone to PC. Navigate to that folder where the file is saved.
Hold down the shift key and right click anywhere in that window. Select "open command prompt".
Type:
adb reboot bootloader
fastboot flash recovery recovery.img
fastboot reboot
This will revert you to the stock recovery
If you do not have the stock rom version or if you are unable to follow the procedure above, I have attached the recovery.img (in zip format) file for the B114 firmware version. you are welcome to use it but, be warned, I WILL NOT BE HELD RESPONSIBLE IF THIS FILE IS INCOMPATIBLE WITH YOUR DEVICE
Click to expand...
Click to collapse
your method is very simple and i really like it, i have tested it and it works great, many thank for your support

[ROM][JB4.2.1][A3000-H][CN][3G] A3000_A421_000_029_130327_CN_3G

Hi, this is stoch China ROM for IdeaTab A3000-H. It has only Chinesse and English languages. And it has A3000_prc_3gfull partition table, requied to flash many ROMs It deletes data (because of flash).
Ok, here is a link to firmware: https://www.mediafire.com/file/6g138sppofvioe5/A3000_A421_000_029_130327_CN_3G.zip/file
Link for drivers for MT65xx Preloader: https://www.mediafire.com/file/r8y5olumc16iye2/Drivers_v1.2_A3.zip/file
Link for SP Flash Tool: https://www.mediafire.com/file/dtl5mlckqxofpul/SP_Flash_Tool_v3.1336.0.198.zip/file
Spoiler: Instructions to flash this ROM
1. First of all, download ROM, drivers and SP Flash Tool.
2. Unpack drivers, ROM and Flash Tool
3. Run SP Flash Tool, press Scatter-loading, select MT6589_Android_scatter_emmc.txt from unpacked folder with ROM
4. Press Download.
5. Turn off tablet, connect it to PC with USB
6. Press Ctrl + R and type devmgmt.msc, click enter.
7. Find "MT65XX Preloader", click on update driver
8. Select "Manual update"
9. Browse the files, select "amd64" folder from "Drivers 1.2".
10. OK, if finished, unplug USB from PC.
11. Connect tablet again
12. If there is any error in SP Flash Tool, click "Stop" and "Firmware Upgrade"
13. Wait for green ring and voila!
If you like it, press Thanks
I hope you like it

How can I just replage logo.bin

mickchip said:
How can I just replage logo.bin
Click to expand...
Click to collapse
Uncheck all images (USRDATA, ANDROID, CACHE), check only LOGO and click Download. Then connect your tablet (power off it before) and done

Done, thank you.

mickchip said:
Done, thank you.
Click to expand...
Click to collapse
Press Like button, if you can

Question (Help) i was trying to root my phone and messed up

I was trying to root my phone via twrp and wiped it. i can access twrp and fast boot is there a way to reinstall miui or something else so that my phone will work again?

I'll paypal the person that helps me first

You can't restore anything since you did a wipe.
If you wiped data. Your miui will restore just reboot to system.
But your data gone.
Did you wipe internal (system) too ?
If that soo you need to use fastboot tool for miui fastboot rom

Abdullah.Csit said:
You can't restore anything since you did a wipe.
If you wiped data. Your miui will restore just reboot to system.
But your data gone.
Did you wipe internal (system) too ?
If that soo you need to use fastboot tool for miui fastboot rom
Click to expand...
Click to collapse
was following this:
1. format data
2. wipe data, cache, dalvik cache, internal storage
3. plug phone to pc
3.1. go to mount: select system additionally, unmount and mount again
4. go to device manager right click on unknow MTP device and update driver-> browse my computer -> let me pick from a list -> select MTP USB Device and finish installation
5. Your device should be visible, copy rom to phone, unplug it from the pc and flash rom
but i did something wrong and now i can only boot into twrp and fastboot

s0tix said:
was following this:
1. format data
2. wipe data, cache, dalvik cache, internal storage
3. plug phone to pc
3.1. go to mount: select system additionally, unmount and mount again
4. go to device manager right click on unknow MTP device and update driver-> browse my computer -> let me pick from a list -> select MTP USB Device and finish installation
5. Your device should be visible, copy rom to phone, unplug it from the pc and flash rom
but i did something wrong and now i can only boot into twrp and fastboot
Click to expand...
Click to collapse
Your wrong is "Wiping internal storage"
In that case, you must download Miui stock rom "Fastboot type not recovery type"
Then use Mi flash Tool latest to flash fastboot rom.
1. Download this rom "Fastboot 4.7 GB" from here :
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
2. Download Mi flash Tool:
https://www.xiaomiflash.com/downloads/MiFlash20181115.zip
3. Extract fastboot rom file .tgz to "C" disk then extract one more time the .zip file in same location "C://" then you get folder with rom build number and name.
4. Open Mi flash Tool , select Rom folder that we had extracted it.
5. Boot to fastboot mode & Connect your device.
6. Hit refresh so you will find your device name.
7. Check erase all data box without lock!
8. Click flash and wait till your device boot to MIUI.

Abdullah.Csit said:
Your wrong is "Wiping internal storage"
In that case, you must download Miui stock rom "Fastboot type not recovery type"
Then use Mi flash Tool latest to flash fastboot rom.
1. Download this rom "Fastboot 4.7 GB" from here :
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
2. Download Mi flash Tool:
https://www.xiaomiflash.com/downloads/MiFlash20181115.zip
3. Extract fastboot rom file .tgz to "C" disk then extract one more time the .zip file in same location "C://" then you get folder with rom build number and name.
4. Open Mi flash Tool , select Rom folder that we had extracted it.
5. Boot to fastboot mode & Connect your device.
6. Hit refresh so you will find your device name.
7. Check erase all data box without lock!
8. Click flash and wait till your device boot to MIUI.
Click to expand...
Click to collapse
The flash tool you linked has a password

Abdullah.Csit said:
Your wrong is "Wiping internal storage"
In that case, you must download Miui stock rom "Fastboot type not recovery type"
Then use Mi flash Tool latest to flash fastboot rom.
1. Download this rom "Fastboot 4.7 GB" from here :
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
2. Download Mi flash Tool:
https://www.xiaomiflash.com/downloads/MiFlash20181115.zip
3. Extract fastboot rom file .tgz to "C" disk then extract one more time the .zip file in same location "C://" then you get folder with rom build number and name.
4. Open Mi flash Tool , select Rom folder that we had extracted it.
5. Boot to fastboot mode & Connect your device.
6. Hit refresh so you will find your device name.
7. Check erase all data box without lock!
8. Click flash and wait till your device boot to MIUI.
Click to expand...
Click to collapse
Thanks! found a download for the tool and followed the steps and now its working!

s0tix said:
Thanks! found a download for the tool and followed the steps and now its working!
Click to expand...
Click to collapse
Glad that I had helped you.
Are you buying me a coffee or not

If you reside in norway i would happily take you out for lunch

Root MIUI 13

hello,
I have a redmi 9 with miui 13. I don't find custome recovery who work. I have already try to flash patched boot of magisk. I just want to root my devices.
help me please

Tutorival_XIX said:
hello,
I have a redmi 9 with miui 13. I don't find custome recovery who work. I have already try to flash patched boot of magisk. I just want to root my devices.
help me please
Click to expand...
Click to collapse
No need TWRP or O.F for rooting.
Root***:
1. Find or redownload the TGZ file for your current ROM or other rom.
2. Browse inside the zip file and find boot.img under the images folder
3. Copy this file to a temporary location in your PC first, and then transfer it to your phone
4. Install the desired version of Magisk app
5. Run the app and choose Install under Magisk
6. Choose Select and Patch a File, then select the boot.img that was transferred earlier
7. A process will run and create a new .img file in the same folder where the original one was
8. Transfer the new file to your PC in the same directory where fastboot.exe is located
9. Open a command prompt window in that same directory
10. Reboot your phone to fastboot mode and connect to PC, USB2.0 port. Check for connection by running command fastboot devices.
11. Run the command fastboot flash boot_ab magiskXXXX.img
Once it's completed, run command fastboot reboot and the phone should boot and be rooted.
***
This is the most common current method.
On some devices, vbmeta,disable-verity are required.

NOSS8 said:
No need TWRP or O.F for rooting.
Root:
1. Find or redownload the TGZ file for your current ROM or other rom.
2. Browse inside the zip file and find boot.img under the images folder
3. Copy this file to a temporary location in your PC first, and then transfer it to your phone
4. Install the desired version of Magisk app
5. Run the app and choose Install under Magisk
6. Choose Select and Patch a File, then select the boot.img that was transferred earlier
7. A process will run and create a new .img file in the same folder where the original one was
8. Transfer the new file to your PC in the same directory where fastboot.exe is located
9. Open a command prompt window in that same directory
10. Reboot your phone to fastboot mode and connect to PC, USB2.0 port. Check for connection by running command fastboot devices.
11. Run the command fastboot flash boot_ab magiskXXXX.img
Once it's completed, run command fastboot reboot and the phone should boot and be rooted.
Click to expand...
Click to collapse
Will this work on Mui 12.5 Android 11? the original rooting guide in the Guides Forum didn't work for me

Snows2w said:
Will this work on Mui 12.5 Android 11? the original rooting guide in the Guides Forum didn't work for me
Click to expand...
Click to collapse
What original rooting guide?
Yep, normally but you may have to use another version of Magisk.

NOSS8 said:
What original rooting guide?
Yep, normally but you may have to use another version of Magisk.
Click to expand...
Click to collapse
[GUIDE] How to unlock and root Xiaomi Redmi 9 (Galahad/Lancelot)
There are some posts on how to root the Xiaomi Redmi 9 (Galahad/Lancelot) phone, but since they have lots of "don't know" phrases (or files of unknown origin), I've managed to do the whole process from scratch. Lancelot or Galahad Basically...
forum.xda-developers.com
This guide

Snows2w said:
This guide
Click to expand...
Click to collapse
What is the code name of your device?
And what version of rom do you want to root (full name, letters + numbers)?

NOSS8 said:
What is the code name of your device?
And what version of rom do you want to root (full name, letters + numbers)?
Click to expand...
Click to collapse
I apologize for the late reply as I have gotten into a car accident.
Anyways here are the phone's info:
Model: Redmi 9 M2004J19C
Miui Version: 12.5.6.0 (RJCMIXM)
Codename: Lancelot

Are you ok?
You can follow the guide indicated and here the necessary imgs.
https://xiaomirom.com/en/download/redmi-9-9-prime-lancelot-stable-V12.5.6.0.RJCMIXM/#global-fastboot
May be more simple
https://unofficialtwrp.com/xiaomi-redmi-9-root-twrp-3-4-1/

Other than a few cuts and bruises I'm fine thank you. And thank you so much for your help I really appreciate it.

NOSS8 said:
No need TWRP or O.F for rooting.
Root***:
1. Find or redownload the TGZ file for your current ROM or other rom.
2. Browse inside the zip file and find boot.img under the images folder
3. Copy this file to a temporary location in your PC first, and then transfer it to your phone
4. Install the desired version of Magisk app
5. Run the app and choose Install under Magisk
6. Choose Select and Patch a File, then select the boot.img that was transferred earlier
7. A process will run and create a new .img file in the same folder where the original one was
8. Transfer the new file to your PC in the same directory where fastboot.exe is located
9. Open a command prompt window in that same directory
10. Reboot your phone to fastboot mode and connect to PC, USB2.0 port. Check for connection by running command fastboot devices.
11. Run the command fastboot flash boot_ab magiskXXXX.img
Once it's completed, run command fastboot reboot and the phone should boot and be rooted.
***
This is the most common current method.
On some devices, vbmeta,disable-verity are required.
Click to expand...
Click to collapse
I am also having issues like OP
My phone Redmi 9 M2003J15SS Miui 13.0.2 (Stable)
Already patched via magisk and copy that image to pc and run fastboot with exact command..
But after sending some files, it says
Sending 'boot_ab' (65536 KB) OKAY [ 1.538s]
Writing 'boot_ab' FAILED (remote: 'This partition doesn't exist')
fastboot: error: Command failed
Can you help with that?
Do I have to open a new thread? I am new here. I just see your valuable post and seems the same scenario as OP except for the model number.
Also can you help me to provide these On some devices, vbmeta,disable-verity are required. if needed.
This is my first time and i am a noob

Use this command but it looks like you have to use vbmeta,disable-verity.
fastboot flash boot magiskXXXX.img
[GUIDE][MAGISK] Root Access for Redmi 9 Mediatek Helio G80 without TWRP
Since our device still no TWRP Support, i will give you a simple guide how to root redmi 9 using magisk. Original guide is here Big Thanks to N3OMOD :good::good::good: EDIT: NO FORMAT DATA REQUIRED BUT BACKUP ALWAYS RECOMMENDED REQUIREMENT : -...
forum.xda-developers.com
[GUIDE] How to unlock and root Xiaomi Redmi 9 (Galahad/Lancelot)
There are some posts on how to root the Xiaomi Redmi 9 (Galahad/Lancelot) phone, but since they have lots of "don't know" phrases (or files of unknown origin), I've managed to do the whole process from scratch. Lancelot or Galahad Basically...
forum.xda-developers.com

NOSS8 said:
Use this command but it looks like you have to use vbmeta,disable-verity.
fastboot flash boot magiskXXXX.img
[GUIDE][MAGISK] Root Access for Redmi 9 Mediatek Helio G80 without TWRP
Since our device still no TWRP Support, i will give you a simple guide how to root redmi 9 using magisk. Original guide is here Big Thanks to N3OMOD :good::good::good: EDIT: NO FORMAT DATA REQUIRED BUT BACKUP ALWAYS RECOMMENDED REQUIREMENT : -...
forum.xda-developers.com
[GUIDE] How to unlock and root Xiaomi Redmi 9 (Galahad/Lancelot)
There are some posts on how to root the Xiaomi Redmi 9 (Galahad/Lancelot) phone, but since they have lots of "don't know" phrases (or files of unknown origin), I've managed to do the whole process from scratch. Lancelot or Galahad Basically...
forum.xda-developers.com
Click to expand...
Click to collapse
Wow you made my day! Thank you my friend. I am a traveller and i wanted to proxify apps. So proxydroid asks for root and now seems everythings fine.
Should i still have to vbmeta,disable verity ?

rocca798 said:
Wow you made my day! Thank you my friend. I am a traveller and i wanted to proxify apps. So proxydroid asks for root and now seems everythings fine.
Should i still have to vbmeta,disable verity ?
Click to expand...
Click to collapse
Nope, if your device is rooted, now.

Question Redmi Note 10 5G can't install fastboot with miflash

Hey all.
I tried getting the Fastboot rom onto my phone but nothing works. I keep getting errors like **FAILED (Error reading sparse file)**
At this point I don't know what to do, I might go to Xiaomi to show them it and possibly get them to do something about it.
EDIT!!!:
I fixed it, changed folder name to x and worked. Thanks to NOSS8 for trying to help

ThePhoneUser0 said:
Hey all.
I tried getting the Fastboot rom onto my phone but nothing works. I keep getting errors like **FAILED (Error reading sparse file)**
At this point I don't know what to do, I might go to Xiaomi to show them it and possibly get them to do something about it.
Click to expand...
Click to collapse
Check here that everything is correct or use the bat file included in the Fastboot rom.
A few tips: use a USB2 port, another version of Miflash, the path C:\miflash
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com

NOSS8 said:
Check here that everything is correct or use the bat file included in the Fastboot rom.
A few tips: use a USB2 port, another version of Miflash, the path C:\miflash
MIFLASH[GUIDE]⚙ USE XIAOMI FLASH TOOL
FOR ALL XIAOMI BOOTLOADER MUST BE UNLOCKED https://new.c.mi.com/global/post/101245 https://en.miui.com/unlock/index.html ----------------------------------------------------------------------------------------------------------- All your data...
forum.xda-developers.com
Click to expand...
Click to collapse
Tried all that, nothing worked.

ThePhoneUser0 said:
Tried all that, nothing worked.
Click to expand...
Click to collapse
Post the Miflash log (Miflash/log folder).

Sure.

Post the largest log in size.

Here.

For some reason it didn't post.
I'll just put it on mediafire.
MediaFire
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com

NOSS8 said:
Post the largest log in size.
Click to expand...
Click to collapse

Try an older version of Miflash.

NOSS8 said:
Try an older version of Miflash.
Click to expand...
Click to collapse
I tried that yesterday, it was the version 2021 08 13

Often fails with Media Tek devices try with
https://xiaomitools.com/sp-flash-tool-en/ or
https://www.technobuzz.net/unlock-bootloader/
EDit:
And I've never seen this:
info1:$fastboot -s (serial number) getvar product
https://www.dmrepairtech.com/2021/12/mtk-client-tool-v52-unlocktool.html

NOSS8 said:
Often fails with Media Tek devices try with
https://xiaomitools.com/sp-flash-tool-en/ or
https://www.technobuzz.net/unlock-bootloader/
EDit:
And I've never seen this:
info1:$fastboot -s (serial number) getvar product
Click to expand...
Click to collapse
Interesting, i'll try tomorrow around 16:00 UTC

NOSS8 said:
Often fails with Media Tek devices try with
https://xiaomitools.com/sp-flash-tool-en/ or
https://www.technobuzz.net/unlock-bootloader/
EDit:
And I've never seen this:
info1:$fastboot -s (serial number) getvar product
https://www.dmrepairtech.com/2021/12/mtk-client-tool-v52-unlocktool.html
Click to expand...
Click to collapse
I unlocked the bootloader again (with mtkclient) but don't know how to use sp flash tool as of course I never used it and its my first time flashing a MediaTek device

ThePhoneUser0 said:
I unlocked the bootloader again (with mtkclient) but don't know how to use sp flash tool as of course I never used it and its my first time flashing a MediaTek device
Click to expand...
Click to collapse
I can't tell you more, never had Media Tek devices.
How to use SP Flash Tool
Step 1: To get started, download SP flash tool compressed file (Smart Phone Flash Tool) and extract it on your computer.
Step 2: Next, download stock ROM firmware file of your Android device and extract it to a folder on your computer. You will find the Android scatter file after extracting.
Step 3: Now switch off your Android smartphone or tablet and remove the battery from the device (if it is removable).
Power Off Android Device
Step 4: Next, go to the extracted folder in Step 1 and click “Flash_tool.exe” to launch SP flash tool.
Launch SP Flash Tool
Step 5: Now in the SP Flash tool window, click on “Download” tab.
Download Tab SP Flash Tool
Step 6: Next, in the download tab click on “scatter-loading” button.
Scatter Loading SP Flash Tool
Step 7: Now click on “Open Scatter File” and choose the scatter file from Step 2.
Choose Scatter File SP Flash Tool
Step 8: Next, click on the “Download” button to launch the firmware flashing process.
Download Button SP Flash Tool
Step 9: Now connect your Android device to the computer using the original USB data cable while pressing Volume up or Volume down button.
Step 10: The firmware flashing process will start immediately, and it will take a minute or two to get completed. Once the flashing process is finished, you will see the “Download OK” green ring in Smart Phone Flash Tool.
Download Ok SP Flash Tool
Step 11: Now close the SP Flash tool Window and unplug your Android smartphone or tablet from the computer.

This tool also
https://forum.xda-developers.com/t/tool-rom2box-all-in-one-frp-flashing-unlocking-tool.4477349/

NOSS8 said:
I can't tell you more, never had Media Tek devices.
How to use SP Flash Tool
Step 1: To get started, download SP flash tool compressed file (Smart Phone Flash Tool) and extract it on your computer.
Step 2: Next, download stock ROM firmware file of your Android device and extract it to a folder on your computer. You will find the Android scatter file after extracting.
Step 3: Now switch off your Android smartphone or tablet and remove the battery from the device (if it is removable).
Power Off Android Device
Step 4: Next, go to the extracted folder in Step 1 and click “Flash_tool.exe” to launch SP flash tool.
Launch SP Flash Tool
Step 5: Now in the SP Flash tool window, click on “Download” tab.
Download Tab SP Flash Tool
Step 6: Next, in the download tab click on “scatter-loading” button.
Scatter Loading SP Flash Tool
Step 7: Now click on “Open Scatter File” and choose the scatter file from Step 2.
Choose Scatter File SP Flash Tool
Step 8: Next, click on the “Download” button to launch the firmware flashing process.
Download Button SP Flash Tool
Step 9: Now connect your Android device to the computer using the original USB data cable while pressing Volume up or Volume down button.
Step 10: The firmware flashing process will start immediately, and it will take a minute or two to get completed. Once the flashing process is finished, you will see the “Download OK” green ring in Smart Phone Flash Tool.
Download Ok SP Flash Tool
Step 11: Now close the SP Flash tool Window and unplug your Android smartphone or tablet from the computer.
Click to expand...
Click to collapse
Keeps saying I need the auth file.