[DISCONTINUED][zippo] LineageOS 19.1 (Android 12.1) for the Lenovo Z6 Pro - Lenovo Z6 Pro ROMs, Kernels, Recoveries, & Other D

[DISCONTINUED][zippo] LineageOS 19.1 (Android 12.1) for the Lenovo Z6 Pro - Lenovo Z6 Pro ROMs, Kernels, Recoveries, & Other D

KNOWN BUGS
Currently only works with bootloader unlocked
SafetyNet does not pass (Unfortunately, this is not possible as your SoC has hardware attestation... the workaround is to use unsupported mods like Magisk which tbh I haven't tried myself as I don't root my devices, but other users said that plus the SafetyNet Magisk mod works)
Fingerprint icon is too low compared to actual location of the scanner

Heyyo, allow me to introduce myself. I am Marc "ThE_MarD" Bourgoin and I maintain LineageOS and TWRP for the LeEco Le Max 2 (X2) and was crowdfunded a zippo which I will maintain LineageOS for (with selinux enforcing of course) and maybe assist with TWRP later. I also own an Asus Zenfone 5z (Z01R) which I maintain LineageOS for (and plan to maintain TWRP) and I was also donated a Motorola Moto X4 (Payton) which I maintain LineageOS and TWRP for.
I'd like to take this moment to also thank anyone who donated to the crowdfunding campaign for my zippo! Without you? I wouldn't have this epic device in my hands to work on.
Also MAJOR thanks to Zhenxiang Chen (aka pasta_con_tonno, Lucchetto) for all the amazing work he has done on zippo.
Special thanks to Einar Gednochsson (aka kanstmablason, pete80pro) for organizing the crowdfunding campaign for my zippo and also a new one for KuranKaname so he can revamp our kernel.
Thanks also to hypnz, chema f, gawin and Lucky for also working in zippo and to HighwayStar who started the initial trees for heart (Lenovo z5 Pro GT) which zippo trees are based upon and Art_Chen for working on heart and zippo and also bringing us FOD Dimming and DC Dimming.
Thanks again to Zhenxiang and Chema f for figuring out and implementing the QFIL recovery and vbmeta while keeping the bootloader locked

w00t! Initial LineageOS 19.0 release for zippo! lineage-19.0-20220212-UNOFFICIAL-zippo is still selinux permissive and QTI Bluetooth might have bugs but I'm not 100% certain if maybe it's just my AptX headset or BT headsets in general so that needs more testing. Please report any other bugs in this thread.
Release lineage-19.0 lineage-19.0-20220212-UNOFFICIAL-zippo - lineageos-for-zippo - OSDN
Release lineage-19.0 lineage-19.0-20220212-UNOFFICIAL-zippo - lineageos-for-zippo #osdn
osdn.net

Heyyo, a new test build is going up! lineage-19.0-20220310-UNOFFICIAL-zippo contains selinux enforcing without any neverallow violations which is super nice! It also has the FM Radio app (tbh haven't had time to test, if someone could please test and report back). Please test all functionality as we are pretty much ready for official LineageOS 19.0 builds once those eventually start coming out.
Release lineage-19.0 lineage-19.0-20220310-UNOFFICIAL-zippo - lineageos-for-zippo - OSDN
Release lineage-19.0 lineage-19.0-20220310-UNOFFICIAL-zippo - lineageos-for-zippo #osdn
osdn.net

Heyyo, a new test build is up! lineage-19.1-20220317-UNOFFICIAL-zippo is Android 12.1 (aka, Android 12 L) and is also selinux enforcing! Please test all functions including FM Radio
Release lineage-19.1 lineage-19.1-20220317-UNOFFICIAL-zippo - lineageos-for-zippo - OSDN
Release lineage-19.1 lineage-19.1-20220317-UNOFFICIAL-zippo - lineageos-for-zippo #osdn
osdn.net

Heyyo, I've updated the first post for LOS 19.1 and also I've put both heart and zippo on the initial 19.1 devices list once it goes official!

ThE_MarD said:
Heyyo, I've updated the first post for LOS 19.1 and also I've put both heart and zippo on the initial 19.1 devices list once it goes official!
Click to expand...
Click to collapse
Good to hear that as I about to switch back to LineageOS after more than 6 months on CN ROM.
Let's do it over this weekend

hahaha I couldn't wait and get it done already!
now I am in 19.1! so happy...still trying to play around with it..

@cheensiong, glad you like it! Lots of good team zippo devs effort in this one too. Once LOS 19.1 official drops? You can just manually flash a build and then the Lineage Updater can handle future OTA

ThE_MarD said:
Heyyo, I've updated the first post for LOS 19.1 and also I've put both heart and zippo on the initial 19.1 devices list once it goes official!
Click to expand...
Click to collapse
one question, when get official, do I need to flash again?

@cheensiong hehe, I think my reply didn't get posted by the time you did yours, you just need to manually flash it once and then the Lineage Updater will allow OTA for future updates
You don't need to wipe, just download, reboot to recovery, flash the official ROM zip and reboot to system

Cool!
Btw, I noticed that I couldn't get Android Auto on it. Fixing it?
Or is my version issue?

@cheensiong tbh I haven't been able to test Android Auto, but that's usually a GApps issue, so maybe it's not ready yet? Which GApps are you trying with atm?

ThE_MarD said:
@cheensiong tbh I haven't been able to test Android Auto, but that's usually a GApps issue, so maybe it's not ready yet? Which GApps are you trying with atm?
Click to expand...
Click to collapse
I am using the version that listed in the 1st post, http://downloads.codefi.re/jdcteam/javelinanddart/gapps

Just to check @cheensiong, you used the MTG 12.1.0 arm64?

ThE_MarD said:
Just to check @cheensiong, you used the MTG 12.1.0 arm64?
Click to expand...
Click to collapse
Yes, just checked my downloaded file. it is that version.

After about a week use, so far so good only noticed 2 minor bugs, not sure if you experienced the same.
1. Few times after certain navigation, the last "column" of the home screen (same apply on 2nd and 3rd screen) get BLANK and all icons get PUSH to the LEFT.
reset back with just two clicks of power button, one click to turn off the screen and one click to bring back the screen.
2. Few times noticed that I didnt manage to capture the photos although I clicked on the shutter button.

@cheensiong, is that with the stock trebuchet launcher and AOSP camera app?

ThE_MarD said:
@cheensiong, is that with the stock trebuchet launcher and AOSP camera app?
Click to expand...
Click to collapse
Yes, both stock trebuchet n camera

Related

[UNOFFICIAL][ROM][A320FL/F/Y] LineageOS 17.x [10.0][64 BIT][Treble]

LineageOS 17.x Unofficial for Galaxy A3 2017
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 10 (Quack), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void. Or not. Depends.
* It's probably expired anyways :D
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit Gerrit Code Review.
What's working?
Audio
Calls
Wifi
Hotspot
Mobile data
GPS
Bluetooth
Fingerprint
Camera (both photos and video)
NFC
Sensors
Vibration
Others I have forgot
What isn't working?
Echo present in calls for the other side (no fix currently found)
Video recording with stock camera (fix known, will be implemented in next build)
Encryption and extended storage via SD (possible to fix, didn't have time to debug yet)
Stretched preview in camera, photos are fine (fix has more downsides than upsides)
Supported variants
Galaxy A3 (2017). Dual SIM is also supported.
All variants should be working but only A320FL is well tested since all developers have it.
How to install
Make sure you have latest bootloader and modem before installing this.
Make sure you are using the latest OrangeFox build. (the older ones will fail)
Make sure you have flashed the repartition script.
Download the Lineage build, optionally GApps and Magisk.
In OrangeFox format data. (Menu > Manage Partitions > Data > Format Data)
In OrangeFox wipe everything except SD and OTG.
Flash LineageOS.
Optional: Flash GApps (rightafter).
Optional: Flash Magisk.
Reboot.
Generally it's ok to dirty flash, but if you encounter issues a clean flash should be the first thing on your mind.
Downloads
• ROM
get.mcfy.fr
Google Drive
• Recovery
OrangeFox
• GApps
OpenGApps (arm64): OpenGApps
BiTGApps (arm64): AFH
• Root
Magisk: GitHub
Credits
Huge thanks to:
@Astrako for all the hours spent on the device tree/kernel/vendor/hardware and making this possible.
@McFy for help along the way and letting me use his server as a mirror.
LineageOS Team
Anybody that reported bugs or helped test various stuff, without every one of you Android 10 would never get so stable here
XDA:DevDB Information
[UNOFFICIAL][ROM][A320FL/F/Y] LineageOS 17.x [10.0][64 BIT][Treble], ROM for the Samsung Galaxy A Series 2017 A3, A5, A7
Contributors
MartinYTCZ
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: Latest modem + BL recommended
Version Information
Status: Beta
Created 2020-02-22
Last Updated 2020-08-26

Telegram group
Join here!
Go also thank @Astrako for his work on the DT, kernel, ports, recoveries and many more
Changelogs
- 20200221
Initial build
- 20200403
March security patches
Many optimisations and smaller fixes
Rootdir updated from A6 2018 Q, along with some proprietary files
Graphics now r29, from A6 2018 Q
Way too much stuff to list here, thx @Astrako for the work
- 20200613
Fixed GPlay crashes
June security patch, and all other LineageOS source changes
SEPolicy Enforcing
Reworked shims
Now using new power HAL
Many smaller optimisations
- 20200713
July security patch and all other LineageOS source changes
Reworked overlays
ROM now passes SafetyNet out of the box
Defined location provider to *hopefully* fix location with MicroG
Updated OMX libs
Other smaller fixes and optimisations
- 20200825 20200830
August security patch and all other LineageOS source changes
Updated FP from coral's April patch to keep passing SafetyNet
Switched to proprietary audio HAL - fixed in-call echo
Other smaller fixes and optimisations
NOTE: Encryption is currently extremely broken and your device will not boot if you'll try and encrypt.
- 20210118
January security patch and all other LineageOS source changes
Other smaller fixes and optimisations

Reserved

Nice work, thanks!
Any guess what could cause the SM-320FL to hard reboot when I insert the microSD card, choose to extend the internal memory, then start to format? It rebooted at 20% of the formatting process, then reboots all the time when I give the PIN code after the bootup and it tries to read the microSD card (I guess). If I take out, no reboot of course.
Edit: any temp. workaround? Formatting in twrp or in another device? (For using it as an internal memory extender, not just as an external storage.)

banciii said:
Nice work, thanks!
Any guess what could cause the SM-320FL to hard reboot when I insert the microSD card, choose to extend the internal memory, then start to format? It rebooted at 20% of the formatting process, then reboots all the time when I give the PIN code after the bootup and it tries to read the microSD card (I guess). If I take out, no reboot of course.
Edit: any temp. workaround? Formatting in twrp or in another device? (For using it as an internal memory extender, not just as an external storage.)
Click to expand...
Click to collapse
I'm dumb for not testing this, I gotta look at home

Hello. First nice work !! I used to have your Lineage 16 which worked fine and decided to upgrade to Lineage17. Yet I have some troubles with the camera with the error "unable to connect to the camera" and camera won't launch. When having this error I have spotted that there is a camera icon in the status bar and I can't get rid of it. Else no other problem detected. Thanks.

yann29 said:
Hello. First nice work !! I used to have your Lineage 16 which worked fine and decided to upgrade to Lineage17. Yet I have some troubles with the camera with the error "unable to connect to the camera" and camera won't launch. When having this error I have spotted that there is a camera icon in the status bar and I can't get rid of it. Else no other problem detected. Thanks.
Click to expand...
Click to collapse
I am not the author of Lineage 16.0, I only use the same mirror
The maintainer of LineageOS 16.0 is @McFy.
If you have the problems with the camera, this sounds like an app using the camera when you try to use it and I haven't been able to reproduce the problem. Please check all your apps and report back.
Hope you like the ROM

Ok thanks. Another issue : I can't get split-screen working with any apps. And you?

Other issue : the echos in calls...but well-known issue on lineage. Hope you will find something...

That is good we do have a separate thread of LOS17 now.
Is spoofing (for microG) already included? Not sure whether patcher works for LOS17 already. If one of you guys here get it working with microG - please rise a hand.
Is OrangeFox a must have or can I keep latest TWRP?

starbright_ said:
That is good we do have a separate thread of LOS17 now.
Is spoofing (for microG) already included? Not sure whether patcher works for LOS17 already. If one of you guys here get it working with microG - please rise a hand.
Is OrangeFox a must have or can I keep latest TWRP?
Click to expand...
Click to collapse
From what other users told me spoofing doesn't work with MicroG.
You can either use the TWRP included in the repartition script or latest OrangeFox. Either way it must support /vendor or you'll get error 7 while flashing

MartinYTCZ said:
From what other users told me spoofing doesn't work with MicroG.
You can either use the TWRP included in the repartition script or latest OrangeFox. Either way it must support /vendor or you'll get error 7 while flashing
Click to expand...
Click to collapse
I think you misunderstood this. The Rom is either spoofed (but obviously not, what a pity!) - or it has to be by external tools like Nanodroid Patcher. Otherwise microG will not work. But as I checked that some time ago, the Patcher couldn't handle Android Q. That's why I am asking. So best option (and less effort) would be if ROM is spoofed already.
Vendor I have already with my Treble+GSI LOS 16 Rom.

starbright_ said:
I think you misunderstood this. The Rom is either spoofed (but obviously not, what a pity!) - or it has to be by external tools like Nanodroid Patcher. Otherwise microG will not work. But as I checked that some time ago, the Patcher couldn't handle Android Q. That's why I am asking. So best option (and less effort) would be if ROM is spoofed already.
Vendor I have already with my Treble+GSI LOS 16 Rom.
Click to expand...
Click to collapse
Yup, ROM is not spoofed out of the box, so your only hope is nanodroid patcher, which doesn't seem to work in Q :/
Also if you've already got Treble, you can flash this with the TWRP you are currently using

Hello, thanks for your great job.
I have two points :
- When using your ROM, after UI start, I have the message system_error_manufacturer (msgid="8086872414744210668") popup. I googled and chek the code isBuildConsistent. On my phone, the two checked strings seem ok. So I dont uderstand why I have this message.
- I try to build myself with the gitlab manifest readme. My first atemp was ok but I also have the system_error_manufacturer error message. Some days latter, I try to patch the function with a big /* */ to avoid the check and always return true. I sync the lineage code and patch the isConsistent() function, rebuild and flash my rom. My phone keep on the bootimg anim and never start. On the /proc/last_krnl, nothing else than some SElinux warning. I try with androidboot.selinux=permissive on kernel command line but same result. I delete all my lineage root and resync all from scratch but the build did not boot anymore. Please, could-you check if your build boot with the last comit of lineage 17.1 and android_samsung_universal7870 ?
Thanks by advance.
Pascal.

pascalr0410 said:
Hello, thanks for your great job.
I have two points :
- When using your ROM, after UI start, I have the message system_error_manufacturer (msgid="8086872414744210668") popup. I googled and chek the code isBuildConsistent. On my phone, the two checked strings seem ok. So I dont uderstand why I have this message.
- I try to build myself with the gitlab manifest readme. My first atemp was ok but I also have the system_error_manufacturer error message. Some days latter, I try to patch the function with a big /* */ to avoid the check and always return true. I sync the lineage code and patch the isConsistent() function, rebuild and flash my rom. My phone keep on the bootimg anim and never start. On the /proc/last_krnl, nothing else than some SElinux warning. I try with androidboot.selinux=permissive on kernel command line but same result. I delete all my lineage root and resync all from scratch but the build did not boot anymore. Please, could-you check if your build boot with the last comit of lineage 17.1 and android_samsung_universal7870 ?
Thanks by advance.
Pascal.
Click to expand...
Click to collapse
I am building myself and running the latest at this time (using the crdroid device tree) and everything is running perfectly for me! (even with a few patches of my own like enabling dark mode in defaults app and a few command-line programs like rtl-sdr, no gapps (f-droid only)). Added screenshots to prove it indeed boots.
If I'm not mistaken this ROM uses the android_samsung_universal7870 device tree as it is on Gitlab?
Then the only few bugs I can talk about are the USB settings unable to be changed live while that worked on the outdated device tree from Github (screenshot can be provided), and the Camera, but I know that's already WIP.
(Sure there's echo in calls but... No one was successful at fixing this and even the crappiest patches I tried myself didn't work)
Thanks to all those who works on this device tree.

The provided Rom of the dedicated XDA thread run fine on my device but when building myself, I have the same problem : traped on bootanim.
Strange, I supose it's my buid env, my laptop is on Debian 10 and I did not make any mod on the standard base.
I will try with a VM and Ubuntu LTS as sugested by AOSP Project.

MartinYTCZ said:
LineageOS 17.x Unofficial for Galaxy A3 2017
How to install
Make sure you have latest bootloader and modem before installing this.
Created 2020-02-22
Last Updated 2020-02-22
Click to expand...
Click to collapse
Thank you for great work, can I ask from where can get latest modem and boot-loader without download whole firmware?

Hello,
Problems are solved ?
Echo present in calls for the other side (investigating)
Video recording with stock camera (fix known, will be implemented in next build)
Encryption and extended storage via SD (investigating)
Stretched preview in camera, photos are fine (probably unfixable)
And stay at home.
Best regards

Migrate doesn't detect it as an installed rom, any help?

pascalr0410 said:
Hello, thanks for your great job.
I have two points :
- When using your ROM, after UI start, I have the message system_error_manufacturer (msgid="8086872414744210668") popup. I googled and chek the code isBuildConsistent. On my phone, the two checked strings seem ok. So I dont uderstand why I have this message.
- I try to build myself with the gitlab manifest readme. My first atemp was ok but I also have the system_error_manufacturer error message. Some days latter, I try to patch the function with a big /* */ to avoid the check and always return true. I sync the lineage code and patch the isConsistent() function, rebuild and flash my rom. My phone keep on the bootimg anim and never start. On the /proc/last_krnl, nothing else than some SElinux warning. I try with androidboot.selinux=permissive on kernel command line but same result. I delete all my lineage root and resync all from scratch but the build did not boot anymore. Please, could-you check if your build boot with the last comit of lineage 17.1 and android_samsung_universal7870 ?
Thanks by advance.
Pascal.
Click to expand...
Click to collapse
I have pushed some changes to GitLab yesterday which fix this problem. You should be able to boot a new build just fine now :highfive:

[ROM][UNOFFICIAL][10.0][tb8704f/x/v] LineageOS 17.1 for Lenovo TAB 4 8 plus

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What works:
Calls/SMS/Mobile data
Wifi
Bluetooth
GPS
Camera
Audio
FM radio
Torchlight
USB and WLAN tethering
Broken
DT2W
You tell me
Source code:
device : https://github.com/lenovo-devs/android_device_lenovo_TB8704
device tb-comon https://github.com/lenovo-devs/android_device_lenovo_tb-common
kernel: https://github.com/lenovo-devs/android_kernel_lenovo_msm8953
vendor: https://github.com/lenovo-devs/proprietary_vendor_lenovo
2020-09-06
Update Lineage code
Fixed FM radio issue
Fixed issues on 8704F (wifi only version), when charger cable unplugged (please report if it really works this time, I dont have wifi only tablet to test)
mailru: lineage-17.1-20200906-UNOFFICIAL-TB8704.zip
gdrive: lineage-17.1-20200906-UNOFFICIAL-TB8704.zip
boot.img for TB-8704V: boot-los17.1-tb8704v-20200531.img (source code)
Previous versions:
2020-06-01
Fixed issue running on 8704F (WiFi version)
mailru: lineage-17.1-20200601-UNOFFICIAL-TB8704.zip
gdrive: lineage-17.1-20200601-UNOFFICIAL-TB8704.zip
boot.img for TB-8704V: boot-los17.1-tb8704v-20200531.img (source code)
2020-03-31
Initial realse
mailru: lineage-17.1-20200531-UNOFFICIAL-TB8704.zip
gdrive: lineage-17.1-20200531-UNOFFICIAL-TB8704.zip
boot.img for TB-8704V: boot-los17.1-tb8704v-20200531.img (source code)
How to install
You have to had TWRP installed from this thread TWRP and ROOT for Tab 4 8/10 (Plus) (TB-8704X/F/V,TB-X704L/F, TB-8504X/F, TB-X304L/F)
In TWRP clean Data if you coming from stock ROM and do Install of this ROM. If you have android 8 stock rom installed you have to format Data with data loss, because used encryption is incompatible with android 7.1
TB-8704V (Verizon)
If you have TB-8704V tablet, you have to additionaly flash boot.img from link above after rom intsallation. This tablet has some hardware differences from x and f and requires custom kernel to work,
Thanks
Big thank to @mistersixt, who donated $$ for device.
XDA:DevDB Information
[ROM][UNOFFICIAL][10.0][tb8704f/x/v] LineageOS 17.1 for Lenovo TAB 4 8 plus, ROM for the Lenovo Thinkpad Tablet
Contributors
highwaystar_ru
Source Code: https://github.com/lenovo-devs/android_kernel_lenovo_msm8953
ROM OS Version: Android 10
ROM Kernel: Linux 3.10.x
Based On: LineageOs
Version Information
Status: Testing
Created 2020-05-31
Last Updated 2020-05-31

Groovy

Nice! I’ll give this a test tomorrow ??

deleted

Gapps
Are gapps included in rom

There is no gapps in the rom, you have to download it from opengapps.org if needed.
There are reports about bootloop on wifi version of tablet (LTE version works fine), I will upload fixed version tomorrow.

I'm syncing up the sources on my ROM Kitchen now

What are the install steps if I have lineage 16 already installed. i.e. sufficient to use the existing TWRP. Can I have Dirty flash? etc

highwaystar_ru said:
There are reports about bootloop on wifi version of tablet (LTE version works fine), I will upload fixed version tomorrow.
Click to expand...
Click to collapse
Okay, I’m on a WiFi only tb8704f, so I’ll wait for the updated ROM.

+1. Same here. Waiting for updated ROM for f.

hunnia41 said:
What are the install steps if I have lineage 16 already installed. i.e. sufficient to use the existing TWRP. Can I have Dirty flash? etc
Click to expand...
Click to collapse
Full wipe and reinstall for a major version number release like this, I believe. Dirty flash will almost certainly fail. Your existing TWRP should suffice, but you'll need to reflash gapps when you install los17.1

I've uploaded new version, this should resolve issue with 8704f, please try and report if it works or not. Full adb logcat output on boot are welcome too.
2020-06-01
Fixed issue running on 8704F (WiFi version)
I has no removing telephony apps after installation on WiFi only tablet.

Branch: lineage-17.1
Hi @highwaystar_ru - if I want to run some tests using your sources which branch should I be syncing to? lineage-17.1 for all of them right?

So far, working very well. No crashes or hangs, everything fast and smooth. Two things that don't work are DT2W but this was already known. The other is USB hubs do not work at all. They do not work on LOS 16 either but they do work on LOS14. A fix for this would be greatly appreciated.
Great work other than that as usual highwaystar.

lancebuks said:
Hi @highwaystar_ru - if I want to run some tests using your sources which branch should I be syncing to? lineage-17.1 for all of them right?
Click to expand...
Click to collapse
Yes all lineage-17.1 branches. In latest built these lines are removed to make it bootable on wifi version https://github.com/lenovo-devs/andr.../lineage-17.0/prebuilt/bin/deunify.sh#L16-L30

highwaystar_ru said:
Source code:
device : https://github.com/lenovo-devs/android_device_lenovo_TB8704
Click to expand...
Click to collapse
BTW the device source link is pointing to TB-8703

highwaystar_ru said:
Yes all lineage-17.1 branches. In latest built these lines are removed to make it bootable on wifi version https://github.com/lenovo-devs/andr.../lineage-17.0/prebuilt/bin/deunify.sh#L16-L30
Click to expand...
Click to collapse
I just did a clean install of the latest version (lineage-17.1-20200601-UNOFFICIAL-TB8704.zip) and noted that, although I'm on tb8704f, I can still see the "Messaging" app, which wasn't there when I wasn on 16. Looking at the code highlighted in the github link above I wouldn't expect to see Messaging on my device. I was also asked if I wanted to configure a SIM during the first boot and setup.
I rebooted to TWRP, wiped Dalvik, system, data and cache, pushed lineageos and opengapp (full) zips, then installed and rebooted.

WiteWulf said:
I just did a clean install of the latest version (lineage-17.1-20200601-UNOFFICIAL-TB8704.zip) and noted that, although I'm on tb8704f, I can still see the "Messaging" app, which wasn't there when I wasn on 16. Looking at the code highlighted in the github link above I wouldn't expect to see Messaging on my device. I was also asked if I wanted to configure a SIM during the first boot and setup.
I rebooted to TWRP, wiped Dalvik, system, data and cache, pushed lineageos and opengapp (full) zips, then installed and rebooted.
Click to expand...
Click to collapse
In fixed 20200601 fix is to *not* remove telephony and messaging apps.

highwaystar_ru said:
In fixed 20200601 fix is to *not* remove telephony and messaging apps.
Click to expand...
Click to collapse
Doh! Sorry ?

New installation
Everything works ok for me except Netflix, not compatible with this device not sure why.

[DISCONTINUED][ROM][WEEKLY] Android Ice Cold Project 16.1 [enchilada]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS), we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q-R with a base of AOSP repositories and some additions from LineageOS for device-specific repositories.
If there are any bugs we will sort them out if it concerns our codebase. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest 11 WEEKLY Release Version 16.1
Download link: https://dwnld.aicp-rom.com/
Please note that official builds will be deleted from our servers every month due to maintenance services.
Starting with AICP 15 we will be storing a copy of the most recent release here: https://media.aicp-rom.com/vault/.
Full Changelog link (OFFICIALS ONLY): https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps:
https://nikgapps.com/downloads
OR
https://wiki.lineageos.org/gapps.html
On clean install, go to Settings > Additional Device Settings . Some Audio Gains may be set to 0 by default. Turn them up.
Google hotword anywhere may not be working. RIP.
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. For beta builds, no. For officials, yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but the discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behavior on flashing a new official build by (or using) the build-in updater service.
Q. How do I 'dirty flash' builds?
A. Use the built-in Updater app. If using beta builds reboot to recovery, flash ROM and recovery solution if required. rebooting and reinstalling gapps is not required if NikGapps are used.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to lose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to lose root. Now swipe to flash and reboot afterward.
Using the ROM:
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. Do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get, and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section on the AICP Extras main page.
The ROM should contain everything you need to enjoy Android R. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM zip file.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Flash OOS 10.3.9 or higher to both slots
2. Download the ROM and GApps.
3. Boot to recovery (TWRP recommended).
4. Wipe the System, Cache, and Data (you might need to format the data partition!). DO NOT WIPE VENDOR
5. Flash the ROM zip file.
6. Reboot back into TWRP recovery.
7. Flash the GApps (optional, needed for e.g. Google Playstore to work).
8. (optional) flash LineageOS copy-partitions zip to ensure your new AICP is on both slots.
9. Reboot and set up your device, enable developer settings and in them, OEM unlock/Advanced reboot/USB debugging.
NOTE: You may find your first boot to the new AICP system only boots to LineageOS recovery. If so, wipe data from the LOS recovery and reboot.
10. Reboot back into TWRP recovery.
11. (optional) Flash the root solution of your choice.
12. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once!
Currently supported Root Solution:
Magisk stable
If you want to contribute to AICP, or if you want to see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
GitHub - AICP/kernel_oneplus_sdm845
Contribute to AICP/kernel_oneplus_sdm845 development by creating an account on GitHub.
github.com
Device tree source:
https://github.com/AICP/device_oneplus_enchiladaVendor source:
Claymore1297/proprietary_vendor_oneplus
Contribute to Claymore1297/proprietary_vendor_oneplus development by creating an account on GitHub.
github.com
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
Contributors:
@Claymore1297
@csolanol
@phpbb3
Information:[/U[
ROM OS Version: 11.0
Kernel: Linux 4.9.x
ROM Firmware Required:OOS Stable
Status: OFFICIAL
Release Date: 02-09-2021
You want to see a "normal" night at the "DEV office", click here!!

INITIAL OFFICIAL 05/10
- Linux 4.9.268
- Kernel rebase
- vendor updates (some blobs to 10.3.10)
- Initial official release
- gerrit.aicp-rom.com for more
Spoiler: UNOFFICIALS
UPDATE 04/17
- Linux 4.9.267
- gerrit.aicp-rom.com for more
UPDATE 04/10
- Linux 4.9.265
- April ASB (RQ2A.210405.005)
- Safety net fixes
- gerrit.aicp-rom.com for more
UPDATE 03/22
- Linux 4.9.263
- gerrit.aicp-rom.com for more
UPDATE 03/18
- Linux 4.9.262
- gerrit.aicp-rom.com for more
UPDATE 03/13
- Resolved an issue with NFC page in Settings causing Settings FC
- Linux 4.9.261
- gerrit.aicp-rom.com for more
UPDATE 03/08
- cherry-pick fix for some videos failing playback (issue introduced by 03 ASB) https://review.lineageos.org/c/LineageOS/android_frameworks_av/+/305302
- Linux 4.9.260
- gerrit.aicp-rom.com for more
UPDATE 03/05
- Linux 4.9.259
- gerrit.aicp-rom.com for more
UPDATE 03/04
- March ASB (RQ2A.210305.006)
- Linux 4.9.258
- gerrit.aicp-rom.com for more
UPDATE 02/12
- Switched to AICP sources for device, kernel, and common
- Linux 4.9.257
- gerrit.aicp-rom.com for more
INITIAL UNOFFICIAL RELEASE 02/08
- Linux 4.9.256
- SELinux Enforcing
- RQ1A.210205.004
- gerrit.aicp-rom.com and source trees for more
Spoiler: Screenshots
Click to expand...
Click to collapse

**reserved**

**reserved**

Masterpiece of custom rom, the top, number one !!!

Updated to the 12/02 version everything perfect !!!!
The best custom rom ever, up to date ....

Download link only shows 31/01 version
Edit: my bad, can see now

Hi, how often will this version of Aicp be updated for Enchilada?

Once, when we are official, every week.

Is R like blur also available?

Saksham03 said:
Is R like blur also available?
Click to expand...
Click to collapse
Soon;-)

Hi, is nikgapps basic okay? I've heard it's breaking some A11 roms

navroop8050 said:
Hi, is nikgapps basic okay? I've heard it's breaking some A11 roms
Click to expand...
Click to collapse
I use it. No issues for me

Thanks and the last thing before I flash, does it have face unlock?

Claymore1297 said:
Once, when we are official, every week.
[/CITAZIONE]
When you think you become official ??
Click to expand...
Click to collapse

Claymore1297 said:
Once, when we are official, every week.
Click to expand...
Click to collapse
AICP ROM
Build notification channel of the AICP Custom ROM
t.me
Here we already have weekly builds

Saksham03 said:
AICP ROM
Build notification channel of the AICP Custom ROM
t.me
Here we already have weekly builds
Click to expand...
Click to collapse
Well not aicp 16.1

Claymore1297 said:
Well not aicp 16.1
Click to expand...
Click to collapse
Oops I didn't see

Anyone?
navroop8050 said:
Thanks and the last thing before I flash, does it have face unlock?
Click to expand...
Click to collapse

navroop8050 said:
Anyone?
Click to expand...
Click to collapse
considering that this is UNOFFICIAL, i dont think face unlock will be available!

[ROM] [UNOFFICIAL] LineageOS 18.1 for the Essential PH-1 (mata)

LineageOS is a free, community built, aftermarket firmware distribution of Android 11 (R), which is designed to increase performance and reliability over stock Android for your device.
Do not lock your bootloader with this installed. You must be 100% stock, I'd suggest on both slots, in order to re-lock your bootloader.
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review.
Unofficial LineageOS Builds
Essential PH-1 (mata): GitHub Release Page (link was changed to 2021.03.12 Build)
Google Apps
Google Apps are not included in this build. At this time I do not plan to release gapps included builds. Users who require this will have to build or flash gapps their own.
Source
Device | Kernel | Proprietary blobs
Here's a local_manifest for those who want to build at home.
Known Issues
Wi-Fi WPA3 Network Connection (Connection to WPA2 Wi-Fi still works.)
Essential Camera App (Need to install Google apps.)
Release Signature (Signed with test-key. You can sign using your release-keys.)
Prerequisites
Unlocked bootloader
February 2020 Release | QQ1A.200105.032
Fastboot and ADB set up
Installation
Make sure you meet the prerequisites before continuing!
Using Fastboot
1, Flash February 2020 Stock Firmware (Run flashall.bat)
2, Flash LineageOS images (fastboot flash ***_a ***.img)
3, Erase userdata (fastboot -w)
(Reboot to Recovery and install Gapps)
Using TWRP
1, Install TWRP image
2, Reboot to TWRP (Power + Volume UP)
3, Start ADB sideload
(If your phone doesn't work touch panel, connect to PC using USB-C cable and enter this command in terminal.)
adb shell twrp sideload
4, Install LineageOS ZIP via sideload (adb sideload ***.zip)
5, Erase userdata
(Install Magisk and Gapps imitate steps 3 and 4)
The LineageOS team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Contributors
conochy (github.com)
(I don't speak English as my main language, so sometimes the sentences are strange or I can't understand comments correctly.)
Source Code: https://github.com/LineageOS
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Version Information
Status: Beta
ROM OS Version: Android 11, LineageOS 18.1
ROM Kernel: Linux 4.x
Based On: LineageOS
Security Patch 2020-03
Released Date: 2021-03-12
Created 2021-03-11
Last Updated 2021-03-12

Cool, Thanks man.

Ok, First issue using the "lineage-18.1-mata-magisk.img"

dememted1 said:
Ok, First issue using the "lineage-18.1-mata-magisk.img"
Click to expand...
Click to collapse
I noticed that I was building with the WITH_SU=true option.
I'm currently creating a build that doesn't have LineageOS SU.
If you're in a hurry, you can use LineageOS su removal (arm64) Version 16.0 to solve this problem.
(In my environment, I was able to solve it by using this.)
Thank you!

I have just released a new version.
The conflict Magisk SU and LineageOS SU has been resolved.
New version : GitHub Release Page (2021.03.12 Build)
Old version : GitHub Release Page (2021.03.11 Build)
(The link in the first post has been changed to a new one.)

｡･ﾟ･ヾ(｡•﹏•｡)ﾉﾞ･ﾟ･｡ said:
I have just released a new version.
The conflict Magisk SU and LineageOS SU has been resolved.
New version : GitHub Release Page (2021.03.12 Build)
Old version : GitHub Release Page (2021.03.11 Build)
(The link in the first post has been changed to a new one.)
Click to expand...
Click to collapse
Ace thanks. Great work.

Thanks for this ROM.
What GApps are you using? I normally use NikGapps, but it fails to install...

MuddyDog said:
Thanks for this ROM.
What GApps are you using? I normally use NikGapps, but it fails to install...
Click to expand...
Click to collapse
I'm using NikGApps.
But in this LineageOS build, the NikGApps installer doesn't work, so I created a GApps Magisk module instead.
NikGapps Core, Basic Magisk Module installers, and a module that removes LineageOS apps whose functions overlap with Basic.
*It is used personally, I do not guarantee complete operation.
GitHub Module Download Page
Also, the official NikGApps installer has files to install in [Installer-File].zip/AppSet/[AppName]/[AppName].dat.br
If you extract [AppName].dat.br with 7-zip etc. and copy the files in it to the corresponding location of /system with a file manager, you can install it manually without using the Magisk module or the official installer.
Example: __etc__permissions -> Copy the files in that folder to /system/etc/permissions/
Example2: ___priv-app___PrebuiltGmsCore -> Copy the files in that folder to /system/priv-app/PrebuiltGmsCore/
If you want to use Google Setup Wizard, you need to format /data after manual installation.

｡･ﾟ･ヾ(｡•﹏•｡)ﾉﾞ･ﾟ･｡ said:
I'm using NikGApps.
But in this LineageOS build, the NikGApps installer doesn't work, so I created a GApps Magisk module instead.
NikGapps Core, Basic Magisk Module installers, and a module that removes LineageOS apps whose functions overlap with Basic.
*It is used personally, I do not guarantee complete operation.
GitHub Module Download Page
Also, the official NikGApps installer has files to install in [Installer-File].zip/AppSet/[AppName]/[AppName].dat.br
If you extract [AppName].dat.br with 7-zip etc. and copy the files in it to the corresponding location of /system with a file manager, you can install it manually without using the Magisk module or the official installer.
Example: __etc__permissions -> Copy the files in that folder to /system/etc/permissions/
Example2: ___priv-app___PrebuiltGmsCore -> Copy the files in that folder to /system/priv-app/PrebuiltGmsCore/
If you want to use Google Setup Wizard, you need to format /data after manual installation.
Click to expand...
Click to collapse
Excellent, thanks again.
Are you planning to maintain this ROM through to Official Release?... or is it a personal project?
Either way, your work is greatly appreciated.

MuddyDog said:
Excellent, thanks again.
Are you planning to maintain this ROM through to Official Release?... or is it a personal project?
Either way, your work is greatly appreciated.
Click to expand...
Click to collapse
Sorry, I have no plans to continue building LineageOS 18.1 until official distribution begins.
The reason is that my Essential Phone was physically broken today.
(Please be assured that this LineageOS 18.1 Build is not the cause)
Therefore, I will not build for this model until we get it second hand again.
(If I build in the future, I'll post it in this thread to let you know.)
(However, considering the official build start time of LineageOS 17.1 last year, I think that the LineageOS 18.1 build will be officially distributed around next month.)

Thanks for this rom; enjoying trying it out.

Does VoLTE work properly on this ROM?

Hi,
For those who can't wait.
I've followed the instructions from
｡･ﾟ･ヾ(｡•﹏•｡)ﾉﾞ･ﾟ･｡(https://github.com/conochy/LineageOS/tree/mata-18.1.)
You can download the files here :
MediaFire
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com

And how do you like it? Any mejor bugs?

It's my daily driver since March 12, but I don't use Magisk and Gapps.
I was on ArrowOS before. They seems on par, at least for my usage

Build Updated.
Download Link
This is final my unofficial build of LineageOS 18.1 for mata.
My Essential Phone was physically broken, this build was not tested on my phone.
Official LineageOS 18.1 was released in 2021.04.02.
I recommend you to install official build.

｡･ﾟ･ヾ(｡•﹏•｡)ﾉﾞ･ﾟ･｡ said:
Build Updated.
Download Link
This is final my unofficial build of LineageOS 18.1 for mata.
My Essential Phone was physically broken, this build was not tested on my phone.
Official LineageOS 18.1 was released in 2021.04.02.
I recommend you to install official build.
Click to expand...
Click to collapse
Thank you for all the hard work. I really appreciate that.

｡･ﾟ･ヾ(｡•﹏•｡)ﾉﾞ･ﾟ･｡ said:
Build Updated.
Download Link
This is final my unofficial build of LineageOS 18.1 for mata.
My Essential Phone was physically broken, this build was not tested on my phone.
Official LineageOS 18.1 was released in 2021.04.02.
I recommend you to install official build.
Click to expand...
Click to collapse
Hey i'm having an issue where my cellular radio keeps connecting and disconnecting rapidly. Anything I can try to fix this? I've tried both your latest build and the official build.
Edit: Ive now observed the behavior after a fresh install. It only starts to happen after the device has been restarted. It will operate fine up until that point.
Edit 2: When I roll back to recovery lineage-17.1-20210329-recovery-mata.img and lineage-17.1-20210329-nightly-mata-signed.zip everything seems to work fine. So the issue must be in the latest builds.

Chirtan said:
Hey i'm having an issue where my cellular radio keeps connecting and disconnecting rapidly. Anything I can try to fix this? I've tried both your latest build and the official build.
Edit: Ive now observed the behavior after a fresh install. It only starts to happen after the device has been restarted. It will operate fine up until that point.
Edit 2: When I roll back to recovery lineage-17.1-20210329-recovery-mata.img and lineage-17.1-20210329-nightly-mata-signed.zip everything seems to work fine. So the issue must be in the latest builds.
Click to expand...
Click to collapse
On my phone, there was no particular problem with the connection of the cellular line (Japan, NTT docomo).
LineageOS 18.1 has some network bugs, such as Wi-Fi (WPA3), which I think are related as well. However, I think it will be fixed in the near future.
The official update for 2021.04.05 fixes some networks and APN, so give it a try.

｡･ﾟ･ヾ(｡•﹏•｡)ﾉﾞ･ﾟ･｡ said:
On my phone, there was no particular problem with the connection of the cellular line (Japan, NTT docomo).
LineageOS 18.1 has some network bugs, such as Wi-Fi (WPA3), which I think are related as well. However, I think it will be fixed in the near future.
The official update for 2021.04.05 fixes some networks and APN, so give it a try.
Click to expand...
Click to collapse
Installed the latest update still getting mostly the same symptoms. LTE network connecting and disconnecting rapidly still. Only difference is the device will no longer crash haha. I connect via Koodo mobile in Canada in case anyone else is having a similar issue.
I have a second essential phone I'm going to test this out on.

Development [ROM][11][UNOFFICIAL] LineageOS 18.1 [OnePlus Nord CE/ebba]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Boots
RIL
Fingerprint
Wi-Fi
Bluetooth
Camera
Audio
Sensors
Flash
GPS
NFC
DT2W
Known issues :
-
In order to prevent problems please use the recovery image included in this release!
Instructions :
-Download the ROM and recovery image
-Boot into bootloader: adb reboot bootloader
-Flash the recovery image: fastboot flash recovery recovery.img
-Format data / do a factory reset in recovery
-Reboot into recovery: click advanced --> reboot to recovery
-Go to Apply update and choose Apply from ADB
-Sideload the rom: adb sideload rom.zip
Downloads :
-Recovery image: *Link*
-LineageOS 18.1 with GApps included: *Link*
Android OS version: 11
Build author/ROM Maintainer: @GriefNorth
Kernel Source: *Link*
Device Tree: *Link* and *Link*
Based on: LineageOS
Status: Stable
Current Stable Version: 18.1
Stable Release Date: Updated monthly
Created: 2022-02-13
Last Updated: 2022-02-13
Special Thanks:
- to the LineageOS team
- @KakatkarAkshay for maintaning PixelExperience avicii device tree on which this build is heavily based on.
Donate link

CHANGELOG:
- sync with last source
- fix wi-fi for EU and GLO
- etc
UPDATING THE ROM:
Unless I say the opposite in the update announcement, this ROM can be updated using by two steps:
1. OTA update method
- SystemSettings
- Update system
- Download new version
- let the system do everything by itself
2. the dirty flash method.
In order to do so, follow these steps:
-Download the new version of the ROM you are using (microG/vanilla)
-Reboot into recovery: adb reboot recovery
-DO NOT CLICK ON FACTORY RESET / WIPE DATA
-Flash the Zip-File of the new ROM: adb sideload rom.zip

Hi, Great, thanks a lot for releasing LineageOS for this phone!!
Would it be possible to add a build without gapp?
Greetings seven
EDIT:
Hey,
Have tested today, installed with their OrangeFox recovery build, Boots not, endless the Linage logo.
Thanks, that sucks
Edit:
Finally Solved with your Revovery.img + Instructions,
It was not possible to avoid the formatting.

This is what I have been waiting for, finally some development!!

Finally something pleasing for this phone. Here're offficial LineageOS device sources for Redmi Note 9 Pro 5G / Mi 10T Lite / Mi 10i, the phones use the same SoC as ours. Maybe it could help to improve your code.
GitHub - LineageOS/android_device_xiaomi_gauguin
Contribute to LineageOS/android_device_xiaomi_gauguin development by creating an account on GitHub.
github.com
GitHub - LineageOS/android_kernel_xiaomi_gauguin
Contribute to LineageOS/android_kernel_xiaomi_gauguin development by creating an account on GitHub.
github.com

Can you provide a Google Drive link?
Thx

novato97 said:
Can you provide a Google Drive link?
Thx
Click to expand...
Click to collapse
I can't, not enough space in GDrive. Maybe someone else

Seven1993 said:
Hi, Great, thanks a lot for releasing LineageOS for this phone!!
Would it be possible to add a build without gapp?
Greetings seven
EDIT:
Hey,
Have tested today, installed with their OrangeFox recovery build, Boots not, endless the Linage logo.
Thanks, that sucks
Edit:
Finally Solved with your Revovery.img + Instructions,
It was not possible to avoid the formatting.
Click to expand...
Click to collapse
I built the rom without gapps.
Link: https://www.dropbox.com/s/t2iiu5dfrgiokuk/lineage-18.1-20220224-UNOFFICIAL-ebba.zip?dl=0

asasamo said:
I built the rom without gapps.
Link: https://www.dropbox.com/s/t2iiu5dfrgiokuk/lineage-18.1-20220224-UNOFFICIAL-ebba.zip?dl=0
Click to expand...
Click to collapse
Thx for the effort!
What 3rd party gapps package would you suggest to use (Like opengapps, nikgapps, flamegapps etc.)?

Sony make.believe said:
Thx for the effort!
What 3rd party gapps package would you suggest to use (Like opengapps, nikgapps, flamegapps etc.)?
Click to expand...
Click to collapse
I always used opengapps in the past. Recently i started using microg for better battery life and little to no tracking.

asasamo said:
I built the rom without gapps.
Link: https://www.dropbox.com/s/t2iiu5dfrgiokuk/lineage-18.1-20220224-UNOFFICIAL-ebba.zip?dl=0
Click to expand...
Click to collapse
How would you add microg to lineage os? Do i need magisk for that?

Fisuxcel said:
How would you add microg to lineage os? Do i need magisk for that?
Click to expand...
Click to collapse
Look at this well made guide. Follow all the steps and you'll have a fully working microg install.

I'm glad to see there's active development for this device. Thanks for that.
I was looking into sources and noticed there's TARGET_CPU_VARIANT_RUNTIME = kryo385 (cortex A75 and A55) in boardconfigcommon.mk file but Snapdragon 750G is kryo570 which is cortex A77 and A55.

Flashing_Expert said:
I'm glad to see there's active development for this device. Thanks for that.
I was looking into sources and noticed there's TARGET_CPU_VARIANT_RUNTIME = kryo385 (cortex A75 and A55) in boardconfigcommon.mk file but Snapdragon 750G is kryo570 which is cortex A77 and A55.
Click to expand...
Click to collapse
You can join the development and fix what you think is wrong.

GriefNorth said:
You can join the development and fix what you think is wrong.
Click to expand...
Click to collapse
It wasn't meant that bad and I've never said something's wrong. Just an information.

Flashing_Expert said:
It wasn't meant that bad and I've never said something's wrong. Just an information.
Click to expand...
Click to collapse
I know, too, had nothing wrong, just one to miss some things

@GriefNorth ... The download link for your rom is no longer working.
Can you please create a new one?
Thank you!

Discombobulated85 said:
@GriefNorth ... The download link for your rom is no longer working.
Can you please create a new one?
Thank you!
Click to expand...
Click to collapse
updated link
if you still have problems with access, try using vpn, I'm from Russia and your ISPs may block access to us.

GriefNorth said:
CHANGELOG:
- sync with last source
- fix wi-fi for EU and GLO
- etc
UPDATING THE ROM:
Unless I say the opposite in the update announcement, this ROM can be updated using by two steps:
1. OTA update method
- SystemSettings
- Update system
- Download new version
- let the system do everything by itself
2. the dirty flash method.
In order to do so, follow these steps:
-Download the new version of the ROM you are using (microG/vanilla)
-Reboot into recovery: adb reboot recovery
-DO NOT CLICK ON FACTORY RESET / WIPE DATA
-Flash the Zip-File of the new ROM: adb sideload rom.zip
Click to expand...
Click to collapse
Just to make sure, I have the lineageos without gapps. I can update it with dirty flash and it won't install the gapps right?

Fisuxcel said:
Just to make sure, I have the lineageos without gapps. I can update it with dirty flash and it won't install the gapps right?
Click to expand...
Click to collapse
only for the version without gapps

Database Develop

welcome