Related
This will be for the SM-G935D/SC-02H Japanese variant of the s7 edge.
Stock ODIN firmware: https://www.androidfilehost.com/?fid=457095661767130814 (Marshmallow)
TWRP 3.0.3-0: https://www.androidfilehost.com/?fid=817550096634747128
Rooted Rom: https://www.androidfilehost.com/?fid=385035244224413763
HKernel for hero2qltedcm:https://www.androidfilehost.com/?fid=745425885120706416
Kernel includes:
CVE updated
Permissive
F2FS support
Ramdisk changes the same as hero2qltechn variant. (All changes are the same)
Kernel Change-log:
https://github.com/travismills82/android_kernel_samsung_msm8996/commits/tw-6.0
TWRP Unofficial:
F2FS Support
More partitions supported for backup and restore compared to official version
How to root this device: https://forum.xda-developers.com/s7-edge/how-to/guide-sm-g9350-s7-edge-qualcomm-sd820-t3410969
Reserved
travis82 said:
This will be for the Japanese variant of the s7 edge this is an unlocked model also.
Stock ODIN firmware: https://www.androidfilehost.com/?fid=457095661767130814 (SC02HOMU1APL2)
TWRP: Coming soon
Debloated Rom: Coming soon
Kernel: Coming soon
Click to expand...
Click to collapse
Can this be used for sm g9350 hongkong?
Sent from my SM-G9350 using Tapatalk
Please use common sense and read ITS FOR THE JAPANESE VARIANT.. READ THE MODEL #. Good gosh stop posting stupid questions dude.
Thanks I'll try this when I get to work.
I can't seem to unlock my bootloader, I'm unable to flash TWRP and enter the recovery. It just says Recovery mode -> Warranty bit set: Recovery and enters into a normal boot after trying it a few times.
Edit:
used the official TWRP and recovery now works. Now trying to install the rom
Edit2:
When trying to install it keeps giving me the following error:
This package is for "SC-02h,hero2qledcm" devices; this is a "hero2qltedcm"
Update process ended with ERROR: 7
Error installing zip file '/sdcard/TWRP/SC-02H_Debloated.zip'
Edit3:
I edited the update-script and removed the assert.
However I don't notice any changes in the rom itself. It still has some bloatware (docomo stuff)
ahh ok i thought it would use sco2h not dcm I can fix that sorry, and I assume twrp is doing the same. I will use a dcm kernel in twrp, let me know if that kernel boots please I dont have the device in hand so I am relying on you all to let me know.
USE crom.apk to unlock bootloader you should find it in galaxy apps store. I'm pretty sure others have unlocked their bootloader doing the same thing. I also used to have someone install my hkroms and kernels on the jap variant so I know you can unlock the bootloader.
CROM: https://www.androidfilehost.com/?fid=385035244224394932
can you unlock the bootloader with that, its a link to what we used to unlock ours.
I need you to unlock your bootloader first please. Sounds like that is the issue.
If I run that app it just exits with Crom Service has stopped working.
Your rom works fine, it has root which is what I needed the most.
Just wish there was a way to remove the sim lock from the device without having to beg Docomo.
I bet I have my asserts all messed up here man I'm sorry. I see SC-02H than hero2qltedcm, than SM-G935D soo I need to get this in the correct order. Would you mind shooting me a pm so I can hangouts you so we can knocks this out quickly?
updated op with twrp recovery and kernel.
This works, root and most of the bloated software is gone
Off topic question (need some insight)
You have started to make a working TWRP for the Docomo variant - thank you for your work (hopefully people in JP using the Docomo version find success).
I know this is off topic but I thought you could provide me with a better understanding.
I am currently using the au KDDI variant (SCV33-Snapdragon) and have successfully installed TWRP (3.0.2-0) with ability to mount /data following xda, youtube, and a Vietnamese forum using google translate; BUT I am unable to keep TWRP ability to mount /data after flashing re-engineered boot file via odin to apply root (Snapdragon Variant Root). TWRP can still be used to go into recovery, mount /ext sdcard, and reboot. I've tried many different styles of rooting after and before installing TWRP, in addition to flashing in different ways - but I still failed. It's either have full working TWRP that can mount /data but without root; or, have root but TWRP that can't mount /data (basically useless as it cannot install anything nor, make backups).
I apologize for such long response, any insight or somewhere you can point me to where I can do more research, as this is how far I have come so far, but still fail to acquire both (Yes I have watched numerous YT vids and read countless post stating devs have not yet found a way on the US-Snapdragon variants, which I understand this may apply to the JP variant too) . Thank you.
With the development of ROMs for the Exynos variants (SG935F/FD) moving along apace... I'm wondering if it is feasible to use one of those ROMs with this kernel.
I did something similar to get a custom ROM made for an AT&T S4 onto my DoCoMo S4 (SC-04E) without issues.
Is that a stupid question?
SCV33 looks exactly the same as SC-02H. What's the difference? single sim dual sim? Can you use sc-02h roms for it? I need more information unless you guys want to start donating me devices.
bu06034 said:
With the development of ROMs for the Exynos variants (SG935F/FD) moving along apace... I'm wondering if it is feasible to use one of those ROMs with this kernel.
I did something similar to get a custom ROM made for an AT&T S4 onto my DoCoMo S4 (SC-04E) without issues.
Is that a stupid question?
Click to expand...
Click to collapse
You guys should never flash an engineering kernel anymore. There is no need since you have a custom kernel and ramdisk and twrp now since I made them. Also those are exynos not qualcomm you can port it but it will be a major task to do.
travis82 said:
You guys should never flash an engineering kernel anymore. There is no need since you have a custom kernel and ramdisk and twrp now since I made them. Also those are exynos not qualcomm you can port it but it will be a major task to do.
Click to expand...
Click to collapse
First, I really apprecate the work you have put in on bringing ROOT and TWRP to users in Japan. If I can help by doing some testing for you with my DoCoMo model, I'd be happy to do so!
Regarding my original question, I was not talking about an engineering kernel. I was thinking that if I flashed a custom ROM for the SG-935F Hong Kong (Exynos) model, and then flashed your kernel over it, would it work?
As I understand it, the kernel is the interface between the OS and the hardware. Maybe that is ignorant? The reason I ask is because this process was quite common for Japanese S4 users to employ custom ROMs for US S4s; i.e. Flash the US custom ROM (e.g. Mokee or Albee95) and then flash the Japanese S4 kernel onto it.
I understand the question might seem silly to you, but I don't have the hundreds of hours required to reach your level of expertise. I have invested sufficient time to understand much of the jargon; and the tools and methods employed to get root and flash ROMs. More than that, I rely on asking the experts, like you. :good:
you would have to port firmware framework and a bit of other things, secondly hong kong does not self exynos versions here. It's all Qualcomm.
SCV33 waiting for someone to flash this kernel on it to let me know if its compatible or not.
Anyways updated main thread with BETA 2.
Enjoy,
Travis82
SCV33 test 1
travis82 said:
SCV33 waiting for someone to flash this kernel on it to let me know if its compatible or not.
Anyways updated main thread with BETA 2.
Enjoy,
Travis82
Click to expand...
Click to collapse
Travis,
TESTED (Semi-working)
I've done some testing on my SCV33 variant using what you've made for the SC-02H.
[Kernel]
I flashed the HKernal Beta 2, using the SC-02H FW, and TWRP Unofficial you've provided onto my SCV33 Galaxy S7e and it is really snappy and fast. Very nice kernel. Any DoCoMo users out there should flash this - though still beta it does the job. I had no problems flashing this in TWRP.
[TWRP Unofficial]
I was able to mount all partitions - works. I had no problem flashing this using Odin.
[Problems I've Encountered]
* After rebooting into TWRP Unofficial many times. My log reads "Unable to mount /steady." I have no idea what this is or what partition it belongs too; but, TWRP is still able to do everything else such as mount /data, wipe /system, etc. - I don't think its a big issue to be honest. Just wanted to let you know.
* After installing everything and everything working fine. I do not/cannot communicate with networks (cannot connect to wifi, cannot call, and no data). I had check SIM status = not available, IMEI = Unknown, SN = Unknown. I had made an EFS back up of my KDDI rom with working network communication and restored with with TWRP Unofficial. Installation via TWRP log has stated successful, but upon reboot problem has not been fixed. Any ideas I should try? I also believe the software from the SC-02H OS handles how im about to connect to data towers and catch frequencies. Putting in my own APN does not work.
* Crom Service.apk you've provided at an earlier comment to unlock bootloader, which I've installed, does not work. All it does is FC when trying to open the app - installation is fine. I had also tried getting one from the internet, and looking for it at the Samsung Galaxy App Store - the internet one does the same, FC. Samsung Galaxy App Store does not have Crom Service available. I am assuming SCV33 wont ever be able to unlock bootloader.
* Debloated Rom Zip does not work, after doing a clean install to Stock Odin, installing TWRP Unofficial, system ext4 format, wiping /system /data /internal storage /dalvikArt /cache, and flashing Debloated Rom Zip with TWRP - states installed successful and boots up. Though upon booting I still have all the bloat there. In addition, many FCs from many different apps, even after reboot (e.g. tap and play, google play store, google services). The rom still functions after a couple more reboots after a /dalvikART cache wipe, but it just doesn't seem as fast as the stock one though. I believe this maybe a conflict due to my device, and myself as well.
----
Oh BTW the SCV33 is:
*SM-G935J
*OS 6.0.1
*Single SIM only
I will try my best do to other methods on trying to get this to fully work, but the Network Communication thing always halts my progress. I really dig this kernel man.
Again, thank you for your hard work and dedication to the Snapdragon Variant its very much appreciated :highfive:. Looking at the Exynos sub-forum I get so jelly at times.
OK is yours has a different modem then the rest. Also your partitions might be a bit different, I really need that device in my hands to look at the partition layout. If you can find SCV33 kernel source I will be more than happy to make a kernel for this variant also. I call my kernels beta because it's just how I do it.
Ok found your source for the kernel I'll check out the configs and maybe make a kernel later on this week.
SM-G935J (SCV33)
Here is a test kernel: https://www.androidfilehost.com/?fid=529152257862698452
Rooted rom: https://www.androidfilehost.com/?fid=529152257862698453
Let me know if there is any issues.
Hello,
I currently have the following:
Phone: OnePlus 3T A3003
Recovery: TWRP 3.1.1-x | blu_spark v37
Rom: RR-N-v5.8.3-20170603-oneplus3-official
I installed all of this after hours of googling last year. I now want to upgrade but I am not finding many helping guides are upgrading (rather than installing from scratch).
I downloaded RR-O-v6.1.0-20180627-oneplus3-official and tried to install it via TWRP (after backing up and wiping some stuff). But I got the an error stating something along the lines of "this rom is for oneplus3/t" and your device is "". Googling lead me to believe I needed to update my recovery. So I downloaded TWRP-3.2.2-0oneplus3.img but I really have no idea if I should be installing this? Last time I installed the blu_spark variant but I have no idea why.
Anyway, my question is:
Given the above, please could someone give me a laymans guide to updating my Custom ROM and which things I should install and in which order.
Thank you!
Glendog1 said:
Hello,
I currently have the following:
Phone: OnePlus 3T A3003
Recovery: TWRP 3.1.1-x | blu_spark v37
Rom: RR-N-v5.8.3-20170603-oneplus3-official
I installed all of this after hours of googling last year. I now want to upgrade but I am not finding many helping guides are upgrading (rather than installing from scratch).
I downloaded RR-O-v6.1.0-20180627-oneplus3-official and tried to install it via TWRP (after backing up and wiping some stuff). But I got the an error stating something along the lines of "this rom is for oneplus3/t" and your device is "". Googling lead me to believe I needed to update my recovery. So I downloaded TWRP-3.2.2-0oneplus3.img but I really have no idea if I should be installing this? Last time I installed the blu_spark variant but I have no idea why.
Anyway, my question is:
Given the above, please could someone give me a laymans guide to updating my Custom ROM and which things I should install and in which order.
Thank you!
Click to expand...
Click to collapse
Clean Flash:
1) Latest Official TWRP (Can be done from within old TWRP)
2) Reboot Recovery to new TWRP
3) Wipe
4) Latest Firmware (OB29)
5) ROM
6) OpenGapps Arm64 8.1 Nano or Pico
7) Root Optional
Don't forget to Nandroid first, and it might be a good idea to remove any security measures on your current setup too. (Fingerprint/Pin/Pattern)
Queue up the zips for Firmware/ROM/Gapps and flash in that order together.
Thank you,
Some follow up questions:
* What should I be wiping during step 3.
* Should I install TWRP 3.2.2, does it matter that I currently have the blu_spark variant? (I don't even know what blu_spark means)
* I am just reading about firmware. I am assuming I need OB29 to work with RR-O-v6.1.0-20180627-oneplus3-official? Is that a simple process?
Glendog1 said:
Thank you,
Some follow up questions:
* What should I be wiping during step 3.
* Should I install TWRP 3.2.2, does it matter that I currently have the blu_spark variant? (I don't even know what blu_spark means)
* I am just reading about firmware. I am assuming I need OB29 to work with RR-O-v6.1.0-20180627-oneplus3-official? Is that a simple process?
Click to expand...
Click to collapse
Just follow the steps. The TWRP you download will be an .img file. In the TWRP Install menu press the button for Image to flash the .img file.
For step 3, from the Wipe menu just swipe to wipe.
DirkGently said:
Just follow the steps. The TWRP you download will be an .img file. In the TWRP Install menu press the button for Image to flash the .img file.
For step 3, from the Wipe menu just swipe to wipe.
Click to expand...
Click to collapse
Thank you, final question. I note you advised to remove security. I changed from 'Pin' to 'None' and gave me a warning about removing it which I agreed to. It still states my phone is encrypted however, and I still need to enter my PIN when restarting. Will this be a problem?
Thank you,
Glendog1 said:
Thank you, final question. I note you advised to remove security. I changed from 'Pin' to 'None' and gave me a warning about removing it which I agreed to. It still states my phone is encrypted however, and I still need to enter my PIN when restarting. Will this be a problem?
Thank you,
Click to expand...
Click to collapse
I believe removing your stored fingerprints removes the boot PIN. Don't stress if you can't do this, it's just an additional precaution.
DirkGently said:
I believe removing your stored fingerprints removes the boot PIN. Don't stress if you can't do this, it's just an additional precaution.
Click to expand...
Click to collapse
Pin/password and fingerprints are two different things. Fingerprints are just a convenient method of authenticating. Removing them does nothing for the actual security with is pin/password.
The reason for removing the lock screen password before taking a backup is that if you install a new ROM and set a password and then restore your older backup, you can't get past the lock screen password. So, remove the password before taking the backup and then you can restore it later and set a new password.
I find the better option is to not remove the password and then, if you need to restore the backup after having changed passwords, you can delete the passwords of the restored backup in TWRP from Advanced>Terminal with these commands:
Code:
cd /data/system
rm -f gatekeeper.* locksettings.*
Changing the pin/password to none doesn't wipe out the on-boot password. However, when setting up a new password and selecting to not set an on-boot password will remove the current on-boot password for some users, but not for others (it doesn't for me).
Sent from my OnePlus 3T using XDA Labs
Thanks guys.
I followed your instructions @DirkGently and it worked a charm.
What you recommend for rooting the device and is as simple as flashing a zip file like above?
Also, is the recovery on a separate partition? So if I mess around flashing firmware/rom/apps and mess up, I'll always be able to boot into the recovery partition and flash again?
Thanks,
Glendog1 said:
What you recommend for rooting the device and is as simple as flashing a zip file like above?
Click to expand...
Click to collapse
Magisk
Glendog1 said:
Also, is the recovery on a separate partition? So if I mess around flashing firmware/rom/apps and mess up, I'll always be able to boot into the recovery partition and flash again?
Click to expand...
Click to collapse
Yes and yes, but firmware may be tricky and messing up too much may render phone unusable. Messing with ROMs is fine though.
Thanks for the reply.
I note that on the Magisk page it states:
"If you plan to flash a custom kernel, flash it AFTER installing Magisk"
I have already installed a custom rom, will this be an issue?
Sorry for so many question. I get really nervous about this stuff!
Glendog1 said:
I have already installed a custom rom, will this be an issue?
Click to expand...
Click to collapse
That's ok of you asking questions, that's what this forum is about.
You should have got no problems if you're running a kernel shipped with custom ROM. Custom kernel is like EX, Mady's Xtended, Franco and so on.
Glendog1 said:
Thanks for the reply.
I note that on the Magisk page it states:
"If you plan to flash a custom kernel, flash it AFTER installing Magisk"
I have already installed a custom rom, will this be an issue?
Sorry for so many question. I get really nervous about this stuff!
Click to expand...
Click to collapse
You don't need to worry about Kernel stuff. RR already includes Caesium Kernel. You chose a good ROM by the way!
Here's a little information about Firmware. The OP3 and OP3T have unified builds. This means that in some cases the same Custom ROM can be used on both. There is some device specific software though so this has to be separated out and treated as independent from the ROM. This is what we refer to as Firmware. When Oneplus release new builds they include the updated Firmware in their Official ROM. If you look at the Firmware thread i linked you to, you'll see that kamilmirza takes the Firmware from the Official OOS builds and makes them available as flashable .zip files that we can use on Custom ROMs. Bookmark his Thread for future use.
There is no need to stress about always being on the latest Firmware for your Custom ROM, just ensure it is the Firmware intended for your device. The version you flashed earlier will probably do you for a while. At the same time, if you do always want to be on the latest, there's no reason not to. There's little to be gained by it though. If you're following the RR thread you'll probably see people mention it when the ROM requires a new Firmware. Again, don't stress about it.
As far as flashing Firmware, you can do it any time. You can do it before flashing an updated build of your ROM, or on it's own in a separate visit to Recovery. It's not particular either way. I would stick with the Open Beta Firmware, which people usually abbreviate to OBXX, i.e OB29. Just remember what you flashed so that you know which version you are using.
Now that you're rocking your Custom ROM you're next questions will be about updating it. This can be done easily and safely by Dirty Flashing. I've done dozens of updated builds since my last clean flash and everything has gone perfectly every single time.
Dirty Flash:
1) Download new ROM build (and Firmware if applicable) to Internal Storage.
2) Boot into Recovery
3) Nandroid Backup
4) From Install Menu, flash Firmware (if applicable), and ROM.
5) Wipe Dalvik & Cache when prompted. (BillGoss will tell you it's not necessary. It doesn't hurt either way, so up to you!)
6) Reboot phone.
For a Dirty Flash, you do not need to use the 'Wipe' Menu at all.
I always take a new Nandroid before flashing an updated build. I will have had a whole week on the previous build so i know i'm not backing up a bug and the backup will be as recent as possible if a problem occurs. Once i boot back into the phone i delete the old Backup. The new one is there if i need it. Always have that one recent Backup, just in case. As i've said, RR is great and i'm yet to run into a problem with it. From now on you can Dirty Flash the updated weekly builds with little to worry about and with a Backup to fall back to if anything goes wrong.
I don't mention Magisk because i don't use it, and i don't advise others use it. Unless you need Root access for something specific, don't bother. Half the threads on XDA are about problems with Magisk. Avoid the added complication if you can. Now this statement will trigger the Magisk fans, but nobody has ever had a bug or failure with something that they did not flash in the first place. Keep it as simple as possible.
Hi,
about 2 years ago I rooted my S2 Galaxy Tab (T719) and now I would like to upgrade from Android 6.0.1 to Android version to 7 or 8. I have googled for instructions on how to upgrade a rooted S2 Tab but did not find anything useful (most info is on OTA upgrades which no longer works on rooted devices). Could someone please post step-by-step instructions (please bear in mind that I only ever deal with this kind of thing once every 2-3 years so I do not have much experience). I have TWRP v 3.0.2 installed (do I need to update this as well?) and the tablet is not encrypted (so hopefully I won't have to wipe the system partition and re-install all the app?!?). Thanks.
I also noticed that there is now a huge variety of ROMs out there. How can one know which ones are trustworthy? The main reason I rooted the tablet was to be able to increase privacy (control app permissions with XPrivacy). So I do not want to install some custom ROM that maybe contains spyware or other compromising features. Any advice on this would be greatly appreciated. Given my motivation (privacy) for rooting, would it maybe be better to go back to Stock ROMs (i.e. non rooted) and simply control web access via netguard (by preventing net access for some apps, they may still spy on my contacts, location, or email but cannot phone home to transmit the information)? At least I would still get OTA updates because being excluded from the OTA channel also poses a security risk in itself I suppose. Ok so any advice would be appreciated.
Thank you in advance!
There is no official Android 8 for our device. If you want 8 or 9 you have to install a custom ROM like LuK1337's LineageOS port. It is as safe as LineageOS is by itself on any device. Only problem you might have then is that calling is not possible anymore for now, but LTE works. If you want to use LOS, you HAVE to format data because it's not compatible at all. If you wanna stay on official Android you might keep it. Installing is done by flashing the official firmware with the correct country code over Odin. This will remove TWRP at first so you have to reflash it by Odin afterwards. For firmware download I always use: https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647 and Odin is found by google. If you wanna got the way to LOS you have to do all the steps I mentioned before too anyways to have a recent Modem firmware and bootloader. In that case you just have to flash LOS and OpenGAPPS by TWRP and delete /data aka Factory reset.
Regardless what you do, after ODIN is done, you HAVE TO boot into TWRP immediately to keep it from being removed by official firmware. While you are in there anyways you can install magisk to keep it from encrypting /data
Many thanks emuandco. So I guess I will stick with the Android 7 as I do not want to reformat the tablet and reinstall all the apps. I have started to download the Android 7 stock ROM, but it is taking quite long so in the meantime just to confirm, the steps to follow are:
1- use odin to flash the stock ROM (no steps required prior to this? I simply overwrite the existing ROM? I suppose that I will loose root then and need to re-root the device using the standard procedure as explained here: http://www.samsungsfour.com/tutoria...nougat-7-0-using-cf-auto-root-all-models.html ?)
2- use odin to flash TWRP (I will need the newest version I guess and cannot use the same as for Android 6?)
3- boot into recovery mode to ensure that TWRP does not get overwritten
4- done
Is this correct? Do I then need to reinstall Xposed, SuperSU and Xprivacy or will they be preserved?
Thanks again!
P.S.: BTW, I also found these instructions: https://forum.xda-developers.com/tab-s2/development/twrp-3-0-2-1-galaxy-tab-s22016-sm-t713-t3390627 which are slightly different from http://www.samsungsfour.com/tutoria...nougat-7-0-using-cf-auto-root-all-models.html and require a wipe of the data partition. Does this mean that for an update to Android 7 I definitely do need to wipe the data partition? If this is the case then this would be a major disadvantage of rooting in the first place and maybe I simply flash the stock ROM and do not root at all but go the "netguard" route as mentioned in my original message?
I never used the official Firmware that much. Fist thing I did was going on LuK1337's nerves to get a port of LOS for it up and running So no clue if Samsung manages to keep /data but I guess so. Yeah, looks fine what you list there. You COMPLETELY overwrite ANY modification in kernel or /system, so reflash your mods and root (Magisk). I always recommend to uase the MOST recent TWRP. (https://dl.twrp.me/gts28velte/ should be it in your case).
Ah and looking at your manuals... Check OEM unlock just to be rather safe than sorry if things go mad.
emuandco said:
I never used the official Firmware that much. Fist thing I did was going on LuK1337's nerves to get a port of LOS for it up and running So no clue if Samsung manages to keep /data but I guess so. Yeah, looks fine what you list there. You COMPLETELY overwrite ANY modification in kernel or /system, so reflash your mods and root (Magisk). I always recommend to uase the MOST recent TWRP. (https://dl.twrp.me/gts28velte/ should be it in your case).
Ah and looking at your manuals... Check OEM unlock just to be rather safe than sorry if things go mad.
Click to expand...
Click to collapse
Deleted
Hi guys, like the title says. I'd like to flash OK Pie onto my old but still working P9 but after so, so much time i have forgotten everything I did to my phone to get to where I currently am. I've been searching for specifics to my situation but the guide to go from EMUI 8 to OK Pie is complicated enough as it is. If I have to factor in the "back to stock" procedure etc I think my brain would explode xD
So I'm looking for any links, guides, personal help or WHATEVER may help me at least get to chinese OREO 9I think I'm capable of taking it from there)
My current setup:
EVA-L09
Build number: EVA-L09C432B378
EMUI version: 5.0
Android: 7.0
My phone is from Latin America, So IIRC I unbranded it, changed it to cust 432 and flashed the latest (stock) firmware which at the time was B378.
I also have TWRP (the latest one) installed. If I got it right, I THINK I need to go back to stock recovery, flash the latest FW and go to Chinese OREO from there before trying to flash OK Pie, right?
Could somebody please be so kind as to either help me or at least point me to a thread/guide made for idiots such as myself xD that can walk me through the steps of going from my FW to stock recovery and stock latest FW?
I'll manage to get to oreo and custom after that.
I appreciate your help in advance.
Thanks.
EDIT: Forgot to mention that yes. I kept my unlock code so thats no problem
Thanks again!
SideSkroll said:
Hi guys, like the title says. I'd like to flash OK Pie onto my old but still working P9 but after so, so much time i have forgotten everything I did to my phone to get to where I currently am. I've been searching for specifics to my situation but the guide to go from EMUI 8 to OK Pie is complicated enough as it is. If I have to factor in the "back to stock" procedure etc I think my brain would explode xD
So I'm looking for any links, guides, personal help or WHATEVER may help me at least get to chinese OREO 9I think I'm capable of taking it from there)
My current setup:
EVA-L09
Build number: EVA-L09C432B378
EMUI version: 5.0
Android: 7.0
My phone is from Latin America, So IIRC I unbranded it, changed it to cust 432 and flashed the latest (stock) firmware which at the time was B378.
I also have TWRP (the latest one) installed. If I got it right, I THINK I need to go back to stock recovery, flash the latest FW and go to Chinese OREO from there before trying to flash OK Pie, right?
Could somebody please be so kind as to either help me or at least point me to a thread/guide made for idiots such as myself xD that can walk me through the steps of going from my FW to stock recovery and stock latest FW?
I'll manage to get to oreo and custom after that.
I appreciate your help in advance.
Thanks.
EDIT: Forgot to mention that yes. I kept my unlock code so thats no problem
Thanks again!
Click to expand...
Click to collapse
General link for Open Kirin ROMs
https://openkirin.net/user_guide/openkirin-rom-installation-instructions/
P9 thread for OK ROMs (under the P9 ROMs, Kernels... collection)
https://forum.xda-developers.com/p9/development/roms-openkirin-aosp-collection-t3828806
In short:
1) You must rebrand and update your L09c432 Nougat to AL10c00 Oreo, it is PRECISELY explained in the OP posts (mainly the post #2, but read #1 - #5 to get better picture) in the corresponding thread:
https://forum.xda-developers.com/p9/development/rebrand-update-tool-hwota7-p9-eva-t3820849
2) Once you will be on EVA-AL10c00b540 Oreo, you have to follow the OK installation guide from the first link.
You will have to install OK Omni Pie for Android 8, not for Android 9 (there is no stock Pie for P9)
If you search for Pie in the given two XDA threads (Search box at top- right on any XDA page), you will find that many people have undergone (and some returned back from OK Pie to stock Oreo) with no problems - but it is important to carefully follow the guides, first for rebranding and installing the Chinese stock Oreo, then to install OK ROM EXACTLY as described on their site (common guide for all OK ROMs and for all Huawei phones when already updated to the stock Oreo)
zgfg said:
General link for Open Kirin ROMs
https://openkirin.net/user_guide/openkirin-rom-installation-instructions/
P9 thread for OK ROMs (under the P9 ROMs, Kernels... collection)
https://forum.xda-developers.com/p9/development/roms-openkirin-aosp-collection-t3828806
In short:
1) You must rebrand and update your L09c432 Nougat to AL10c00 Oreo, it is PRECISELY explained in the OP posts (mainly the post #2, but read #1 - #5 to get better picture) in the corresponding thread:
https://forum.xda-developers.com/p9/development/rebrand-update-tool-hwota7-p9-eva-t3820849
2) Once you will be on EVA-AL10c00b540 Oreo, you have to follow the OK installation guide from the first link.
You will have to install OK Omni Pie for Android 8, not for Android 9 (there is no stock Pie for P9)
If you search for Pie in the given two XDA threads (Search box at top- right on any XDA page), you will find that many people have undergone (and some returned back from OK Pie to stock Oreo) with no problems - but it is important to carefully follow the guides, first for rebranding and installing the Chinese stock Oreo, then to install OK ROM EXACTLY as described on their site (common guide for all OK ROMs and for all Huawei phones when already updated to the stock Oreo)
Click to expand...
Click to collapse
Hi, thanks for replying. I'm aware of the PROCEDURE not so sure about the "how to".
Thats why I posted. Your post basically told me what I already knew (and talked about in my post)
What I'm looking for is help going from my current TWRP/STOCK/ROOTED FW. Back to full stock so I can start updating the ORIGINAL FW. I can't find any info on how to go back to stock recovery for instance. Do I need a specific recovery for the FW I'm running? Is it generic? Where do I find it? How do I flash it? Where do I get the stock firmware? (Huawei firmaware finder?) Which one do I flash? Does flashing the stock firmware automatically flashes the stock recovery? Things like that. I appreciate you trying to help but I already read and knew the things you linked to. My issue is, like I said: going back to stock before I can follow any guide to go up to oreo.
Thanks anyway!
SideSkroll said:
Hi, thanks for replying. I'm aware of the PROCEDURE not so sure about the "how to".
Thats why I posted. Your post basically told me what I already knew (and talked about in my post)
What I'm looking for is help going from my current TWRP/STOCK/ROOTED FW. Back to full stock so I can start updating the ORIGINAL FW. I can't find any info on how to go back to stock recovery for instance. Do I need a specific recovery for the FW I'm running? Is it generic? Where do I find it? How do I flash it? Where do I get the stock firmware? (Huawei firmaware finder?) Which one do I flash? Does flashing the stock firmware automatically flashes the stock recovery? Things like that. I appreciate you trying to help but I already read and knew the things you linked to. My issue is, like I said: going back to stock before I can follow any guide to go up to oreo.
Thanks anyway!
Click to expand...
Click to collapse
If rooted by Magisk, there is Uninstall option in Magisk Manager, it will unroot.
Similarly SuperSU had an Unroot/Unistall option.
In both cases you can flaslh back the stock Boot partition but it is cleaner to unroot by using their Uninstall options.
From TWRP or Fastboot you have to flash stock Recovery (corresponding to your current stock Nougat firmware) to revert back from TWRP
Generally, if you download from FirmwareFinder update.zip corresponding to your current stock Nougat (must be from FullOTA-MF or FullOTA-MF-PV), unzip, then by using Huawei Update Extractor, you can extract Boot.img and Recovery.img that you can flash then from Fastboot or from TWRP to go back to stock Boot and to stock Recovery
Once you go back to stock Boot and Recovery, you can boot to eRecovery (switch off, connect to charger, keep pressing Vol+ and boot by Pow) and choose Download latest firmware and recovery
----
But in fact, since you already have TWRP, use the HWOTA method from this post to update to c432b504 or b505:
https://forum.xda-developers.com/showpost.php?p=75787151&postcount=2
You can do the same with HWOTA7 from the corresponding thread I gave you (before you will go to rebrand to AL10c00b399).
In both cases, you have to download three update*.zip files for eg L09c432b504 (must be FullOTA-MF), rename one or two of them as described in the OP posts (be careful, some people have Windows 10 that hides zip extension and they wrongly rename files to have double zip extension and then HWOTA/HWOTA7 scripts cannot find the file and fail to flash resulting with half-brick), put them to DLOAD file on the SD card and follow the guides
zgfg said:
If rooted by Magisk, there is Uninstall option in Magisk Manager, it will unroot.
Similarly SuperSU had an Unroot/Unistall option.
In both cases you can flaslh back the stock Boot partition but it is cleaner to unroot by using their Uninstall options.
From TWRP or Fastboot you have to flash stock Recovery (corresponding to your current stock Nougat firmware) to revert back from TWRP
Generally, if you download from FirmwareFinder update.zip corresponding to your current stock Nougat (must be from FullOTA-MF or FullOTA-MF-PV), unzip, then by using Huawei Update Extractor, you can extract Boot.img and Recovery.img that you can flash then from Fastboot or from TWRP to go back to stock Boot and to stock Recovery
Once you go back to stock Boot and Recovery, you can boot to eRecovery (switch off, connect to charger, keep pressing Vol+ and boot by Pow) and choose Download latest firmware and recovery
----
But in fact, since you already have TWRP, use the HWOTA method from this post to update to c432b504 or b505:
https://forum.xda-developers.com/showpost.php?p=75787151&postcount=2
You can do the same with HWOTA7 from the corresponding thread I gave you (before you will go to rebrand to AL10c00b399).
In both cases, you have to download three update*.zip files for eg L09c432b504 (must be FullOTA-MF), rename one or two of them as described in the OP posts (be careful, some people have Windows 10 that hides zip extension and they wrongly rename files to have double zip extension and then HWOTA/HWOTA7 scripts cannot find the file and fail to flash resulting with half-brick), put them to DLOAD file on the SD card and follow the guides
Click to expand...
Click to collapse
Thank you. Thats exactly what I was looking for. I really appreciateyour help.
Btw, no one should have the "hide extensions for known file types" checkbox marked...
Edit: Should I flash the same FW version Im currently using and then update regularly? To prevent any issues? (Cause i noticed there are some rules as to the version jumps that can be made flashing like this...
SideSkroll said:
....Should I flash the same FW version Im currently using and then update regularly? To prevent any issues? (Cause i noticed there are some rules as to the version jumps that can be made flashing like this...
Click to expand...
Click to collapse
It must be the same model and cust, c432, but safer if you also apply the same build number (b387 ?)
Once you are back on stock you should start receiving OTA updates (have WiFi and a valid SIM card). Give it some time but check also manually from Settings / System updates.
As mentioned in my previous post, you can also use eRecovery / Install latest fw and recovery (if OTA coming slow), and there is a similar option in HiSuite. You will probably not need to use HWOTA or HWOTA7 to jump from clean stock b386 up to b50x
SideSkroll said:
Thats exactly what I was looking for...
Click to expand...
Click to collapse
Did you go for OK Pie (or you stayed on Nougat, or in between on stock Oreo b540), was it Okay?
zgfg said:
It must be the same model and cust, c432, but safer if you also apply the same build number (b387 ?)
Once you are back on stock you should start receiving OTA updates (have WiFi and a valid SIM card). Give it some time but check also manually from Settings / System updates.
As mentioned in my previous post, you can also use eRecovery / Install latest fw and recovery (if OTA coming slow), and there is a similar option in HiSuite. You will probably not need to use HWOTA or HWOTA7 to jump from clean stock b386 up to b50x
Did you go for OK Pie (or you stayed on Nougat, or in between on stock Oreo b540), was it Okay?
Click to expand...
Click to collapse
Hi again. First of all I would like to thank you agaib for your help. You made the process so much sinpler and quixk for me and I do apprexiate it.
Second, I updated to the latest "original" fw for my c432 phone OTA but then had to modify the HWOTA7 procesa so I could dl and install the latest/latest fw (because it wouldnt even register when searching for it) I used huawei fw finder to verify it and dl.
After that I went to chinese Oreo, flashed the network fixes and installed a TINY OTA update which fixed some sexurity issues apparently (thankfully it went Ok cause I THINK flashing OTA in a "converted" phone is a big nono?)
Anyways, I ended up on omni pie (the latest beta whixh is 5.2 I believe) as going AOSP was the whole point of this endeavor.
So far I'm LOVING it. Its such a refreshing thing not having to deal with all the bs OEMs bake into their roms... But Im experiencing a couple of issues as well. Not sure if its the rom, my phone or the android version (particularly my issue with battery life since I was having issues with the duration way before I updates, actually that was one of my motivations for updating since I read that pie had better battery management)
Anyway, my issues are as follow. Hope you can help (once again)
Battery life SUCKS (like really, it went from bad to terrible... Not sure if stock oreo would make it better, or perhaps omni pie needs some optimizations?)
The camera (huawei one, not sure about the aosp) has issues. Multiple issues. The biggest one being that if I try to go from back to front camera the app locks in a black screen and I have to go into the app, delete data, reboot the phone and relaunch it (and that doesnt fix it everytime)
The last issue is with pop messages from apps and/or settings. Sometimes, when installing and app and/or changing aome setting a white popup shows up with ONLY an OK option. I cant read anything on the popup. Everything is white. Not sure if its an issue with the theme (I changed from default to "hell" or something like that) but it is VERY annoying not knowing what youre agreeing to.
Last but not least I have a question about the stock rexovery, factory reset and flashing new versions of omni (if and wheb they come out)
In one of the steps for flashing omni the guide asks to perfomr a factory reset from the stock rom. Thing is, it doesnt work. I mean, when I confirm the factory reset the process starts and approximately at 15% an exclamation sign appears and the process percentage stops working. I can reboot the system and everything works fine (using the phone to post this actually) but Im left with that feeling of not knowing why something failed... You know what I mean? Is that nornal?(the failure to factory reset, not the feeling ) also, does factory wiping the phone removes root access? Or does it only renove magisk manager?
Also, if I ever wabt to update the rom (not change it mind you, but flash the next beta or stable or whatever they come up with) do I need to flash the stock recovery again? (Currently rooted with magisk) or is it a separate partition? (Sinxe I had to modify the ramdisk and not flash a custom recovery) also, will I need to do the whoooole thing again? (Backup everything, restore tk factory etc etc) or is it just like with lineage for exanple where you could flash and updatr and keep your data untouched?
Thanks for EVERYTHING my friend. And I hope you can answer my questions (particularly the ones about battery life and thebfactory reset issue since Im planning on doing one last factory reset before settling with the rom. Just waiting for my new micro sd. The one that will stay in the phone)
Sorry for the typos. Writing this huge post on a phone is a PITA.
SideSkroll said:
Hi again. First of all I would like to thank you agaib for your help. You made the process so much sinpler and quixk for me and I do apprexiate it.
Second, I updated to the latest "original" fw for my c432 phone OTA but then had to modify the HWOTA7 procesa so I could dl and install the latest/latest fw (because it wouldnt even register when searching for it) I used huawei fw finder to verify it and dl.
After that I went to chinese Oreo, flashed the network fixes and installed a TINY OTA update which fixed some sexurity issues apparently (thankfully it went Ok cause I THINK flashing OTA in a "converted" phone is a big nono?)
Anyways, I ended up on omni pie (the latest beta whixh is 5.2 I believe) as going AOSP was the whole point of this endeavor.
So far I'm LOVING it. Its such a refreshing thing not having to deal with all the bs OEMs bake into their roms... But Im experiencing a couple of issues as well. Not sure if its the rom, my phone or the android version (particularly my issue with battery life since I was having issues with the duration way before I updates, actually that was one of my motivations for updating since I read that pie had better battery management)
Anyway, my issues are as follow. Hope you can help (once again)
Battery life SUCKS (like really, it went from bad to terrible... Not sure if stock oreo would make it better, or perhaps omni pie needs some optimizations?)
The camera (huawei one, not sure about the aosp) has issues. Multiple issues. The biggest one being that if I try to go from back to front camera the app locks in a black screen and I have to go into the app, delete data, reboot the phone and relaunch it (and that doesnt fix it everytime)
The last issue is with pop messages from apps and/or settings. Sometimes, when installing and app and/or changing aome setting a white popup shows up with ONLY an OK option. I cant read anything on the popup. Everything is white. Not sure if its an issue with the theme (I changed from default to "hell" or something like that) but it is VERY annoying not knowing what youre agreeing to.
Last but not least I have a question about the stock rexovery, factory reset and flashing new versions of omni (if and wheb they come out)
In one of the steps for flashing omni the guide asks to perfomr a factory reset from the stock rom. Thing is, it doesnt work. I mean, when I confirm the factory reset the process starts and approximately at 15% an exclamation sign appears and the process percentage stops working. I can reboot the system and everything works fine (using the phone to post this actually) but Im left with that feeling of not knowing why something failed... You know what I mean? Is that nornal?(the failure to factory reset, not the feeling ) also, does factory wiping the phone removes root access? Or does it only renove magisk manager?
Also, if I ever wabt to update the rom (not change it mind you, but flash the next beta or stable or whatever they come up with) do I need to flash the stock recovery again? (Currently rooted with magisk) or is it a separate partition? (Sinxe I had to modify the ramdisk and not flash a custom recovery) also, will I need to do the whoooole thing again? (Backup everything, restore tk factory etc etc) or is it just like with lineage for exanple where you could flash and updatr and keep your data untouched?
Thanks for EVERYTHING my friend. And I hope you can answer my questions (particularly the ones about battery life and thebfactory reset issue since Im planning on doing one last factory reset before settling with the rom. Just waiting for my new micro sd. The one that will stay in the phone)
Sorry for the typos. Writing this huge post on a phone is a PITA.
Click to expand...
Click to collapse
This small OTA bringing Patch02 over b540 installs even over TWRP (but that was not the case for OTA from eg b535 to b540)
Cannot discuss/compare battery for Omni Pie, since not using Omni
Problem with Camera app does not show on stock Oreo. Even if the app was somehow ported from Huawei, there are maybe problems with integration to Omni.
Various Huawei/Mate models come with different cameras, but there is only one OK Omni ROM (with one Camera app) given to work on all Huawei/Mate models
Btw, somebody else also complained about issues with Camera (and GPS) and decided to go back to stock Oreo.
Similarly, issues you described about black notifications or so must be related to the custom ROM, theme or so.
As a general rule:
- for installing OK ROM, you flash System partition, and nothing else
- you also wipe Data partitiom (containing all your installed apps, incl Magisk Manager, also containing your user settings)
It does not affect any other partition.
Therefore, changes given by NW patch persist - without, you will have (also in that OK ROMs) problems with SIM card(s) and connecting to the network
Also, Magisk, which was flashed to Ramdisk, persists. You must only install Magisk Manager again, because it is user apo, installed to Data partition that was wiped
You must check on the OK side how they advice installing the updates of OK ROMs
(It is questionable if they will get updates any more, since OK team switched to development of ROMs which install over the stock Pie, whereas on P9 you have no stock Pie - only Oreo, and most likely, we will never see stock Pie for P9.
Just check when OK team released last ROM for stock Oreo, and compare with their releases of OK ROMs for stock Pie:
https://openkirin.net/download/
Hence IMO, for updating the OK ROM (if/when it comes), you will again just need to flash its System and to wipe Data (and then to reinstall user apps like Magisk Manager).
Hopefully, you can backup and restore some apps and settings by Titanium.
Whether you don't need to wipe Data for such update - check from the OK support.
On the Open Kirin site you will find Support pages (Faq, HowTo) and also a link to the live Telegram channel
I'm looking for a good source of firmwares, i know the famous sites but some firmwares doesn't seem to be listed. I know in the time os Samsung KIES there were tools which communicated directly with samsung.
For example these firmware builds for the SM-G975Ux aren't listed on most firmware sites but have the December secutiry update with binary/bootloader version 8: G975USQS8IVL1 and G975USQS8IVL2
All the big sites have ROMs for that phone (same one I have). There is no "Ux" model... it's *U or *U1, with the latter being unlocked. IF you search for U1 ROMs you have many selections, but most get the XAA version which will usually change carriers automatically based on the SIM card.
The latest BL=8 version I see there is https://www.sammobile.com/samsung/g...M-G975U1/XAA/download/G975U1UEU8IWB6/1741280/ which is the February 2023 security update. I believe this is the last one we are getting (but I could be mistaken as there may be 1 more security patch, I don't remember).
There's U U1 0 W F N .... I'm looking for the oldest firmware with binary version 8, but it seems the sites don't show all firmwares available.... i'm looking for the oldest firmware with U8 bootloader (or any compatible bootloader with binary 8 version), i could have a look at all sites and try my luck... but they don't seem to have all data. but like i said i prefer some original source xml files... i saw some url's to original samsung servers but can't find them anymore.
There is already a firmware available with the march update.... but you have to be lucky to find them... i'm looking for original sources. like update.zip's and such
Found the first one....
https://fota-cloud-dn.ospserver.net/firmware/TMB/SM-G975U/version.xml
I'd recommend around sammobile and samfw. These are the two sources I use the most
hey!
after I wanted to update my g973f from "G973FXXUGHVK1" to "G973FXXSGHWC2" (I tried odin 3.13 and odin 3.14) and an error occurred, I can't install anything anymore... recovery and download mode work, and I can also flash the original firmware, but the device no longer boots into the system! even custom roms don't want to boot anymore
Can anybody help me further?
Ben1987 said:
hey!
after I wanted to update my g973f from "G973FXXUGHVK1" to "G973FXXSGHWC2" (I tried odin 3.13 and odin 3.14) and an error occurred, I can't install anything anymore... recovery and download mode work, and I can also flash the original firmware, but the device no longer boots into the system! even custom roms don't want to boot anymore
Can anybody help me further?
Click to expand...
Click to collapse
Do you mind explaining a bit more? Do you mean like that it boots you into recovery only or?
WooBLOATERRRR said:
Do you mind explaining a bit more? Do you mean like that it boots you into recovery only or?
Click to expand...
Click to collapse
if i flash a new rom (whether original or custom rom) nothing happens after the reboot... download mode works too, flashing twrp works too! however, the system boot does not work via twrp either... not even a bootloop, the cell phone does not react at all! the task combination for
Right now I don't even care if I get the original firmware or a custom rom running... I hope I didn't brick it (((
My old device was a G930F, its unbreakable make sure you flash the right rom and wipe data and dalvik cache after flashing.... THis ons is locked so it doesn't have fastboot. My G-930F came with fastboot enabled so you can always fastboot a recovery.img. like TWRP
Did you try to download TWRP from twrp.me and "fastboot boot twrp-3.7.0_9-0-herolte.img" ? it should boot to twrp in fastboot mode (hold volume down + home + power).
Ben1987 said:
if i flash a new rom (whether original or custom rom) nothing happens after the reboot... download mode works too, flashing twrp works too! however, the system boot does not work via twrp either... not even a bootloop, the cell phone does not react at all! the task combination for
Click to expand...
Click to collapse
1. is your KG status is broken?
2. Is your bootloader unlocked?
You know how to flash lineageos through twrp right? and how to use odin?
Maybe flash lineageos to see if everything works.... and then revert to original software. Be sure to wipe cache/dalvik and userdata
DaanNL said:
There's U U1 0 W F N .... I'm looking for the oldest firmware with binary version 8, but it seems the sites don't show all firmwares available.... i'm looking for the oldest firmware with U8 bootloader (or any compatible bootloader with binary 8 version), i could have a look at all sites and try my luck... but they don't seem to have all data. but like i said i prefer some original source xml files... i saw some url's to original samsung servers but can't find them anymore.
There is already a firmware available with the march update.... but you have to be lucky to find them... i'm looking for original sources. like update.zip's and such
Found the first one....
https://fota-cloud-dn.ospserver.net/firmware/TMB/SM-G975U/version.xml
Click to expand...
Click to collapse
Yes, I know there are many other variant firmwares out there, but for a U phone (snapdragon) there is really only U and U1... the rest are incompatible.
There is no "older" firmware with binary 8, because the firmwares are packaged with the proper/compatible binary already. Basically, the "binary" is the bootloader version. On Snapdragon phones, you must have the proper BL/binary to flash, as you already know. You can't interchange the binary/BL with the ROM and security updates because they are not made that way.
The update.zip you're looking for are updates sent by Samsung directly, and they can update the ROM (and Binary) from one stock version to another... but, again, they will update both the binary/BL as well as the ROM, so they can't be broken up to only do one or the other.
It sounds like you're trying to get to an older ROM version (for whatever reason) with an older security patch level as well? Basically, this cannot be done on Snapdragon phones. Once you're on an updated binary/BL, you're stuck there (at least today you are).
WooBLOATERRRR said:
I solved the problem! I had unlocked the bootloader, but I also had to deactivate verity via CMD with twrp+adb "adb disable-verity"
ok i've solved the problem now, but does anyone know why i couldn't even start the original stock roms? Actually, the stock ROM should set everything to factory settings...
Click to expand...
Click to collapse
WooBLOATERRRR said:
1. is your KG status is broken?
2. Is your bootloader unlocked?
Click to expand...
Click to collapse
Thank you for helping so quickly with ideas... I would not have expected such quick help with such an old model, even samsung customer service didn't want to help me yesterday
Ben1987 said:
Thank you for helping so quickly with ideas... I would not have expected such quick help with such an old model, even samsung customer service didn't want to help me yesterday
Click to expand...
Click to collapse
Samsung/apple support in a nutshell
schwinn8 said:
Yes, I know there are many other variant firmwares out there, but for a U phone (snapdragon) there is really only U and U1... the rest are incompatible.
There is no "older" firmware with binary 8, because the firmwares are packaged with the proper/compatible binary already. Basically, the "binary" is the bootloader version. On Snapdragon phones, you must have the proper BL/binary to flash, as you already know. You can't interchange the binary/BL with the ROM and security updates because they are not made that way.
The update.zip you're looking for are updates sent by Samsung directly, and they can update the ROM (and Binary) from one stock version to another... but, again, they will update both the binary/BL as well as the ROM, so they can't be broken up to only do one or the other.
It sounds like you're trying to get to an older ROM version (for whatever reason) with an older security patch level as well? Basically, this cannot be done on Snapdragon phones. Once you're on an updated binary/BL, you're stuck there (at least today you are).
Click to expand...
Click to collapse
I've tried different firmwares, its all about snapdragon. You can also flash SM-G975W parts and other snapdragon variants.... there's a lot of variants out there.
I first upgraded and then downgraded to the parts i wanted and am on a rom now with security patch level December 2022, as long as the binary version is the same there's no problem. I've got the latest modem installed and the oldest firmare and bootloader for the latest binary version, i can upgrade or downgrade my bootloader. I already asked someone before if this was possible and if he could confirm because before i was only able to flash CSC and AP i think.
If there's no updates comming anymore why not downgrade and wait for a new leak
I'm also sure we can unlock the bootloader, i'm trying to make an lposed module. I've installed lspatch and lposed and they work fine for some modules. The bootloader unlock has several prerequisites (properties and such) if i can make it look for other properties or something like that we might get an unlock option. Also it looks for an encrypted file on EFS, if someone with an unlocked samsung phone could copy that file we would be a lot further.
It's called /efs/sec_efs/sktdm_mem/encmembership.txt and should be an encrypted file, also if anyone knows how to set ro properties without root (like a stub before the preference controller starts) this would be very usefull.