Database Develop

Question about original rom

Hi all.
I have to send my phone to RMA because of bad screen and or video chip. Can anyone help me to get the original rom of it?
Thanks.

FedericoUY said:
Hi all.
I have to send my phone to RMA because of bad screen and or video chip. Can anyone help me to get the original rom of it?
Thanks.
Click to expand...
Click to collapse
original ? you can download stock firmwares on developers.google.com/android and below look for nexus factory images.
then follow the fastboot method which is very easy.

Hehe, thank you for your fast answer. I already did that, and I doubt about some codes near the links:
.....
6.0.1 (MOB30O)
6.0.1 (MMB30R)
6.0.1 (MOB30W)
.....
I really don't know what are those codes.

FedericoUY said:
Hehe, thank you for your fast answer. I already did that, and I doubt about some codes near the links:
.....
6.0.1 (MOB30O)
6.0.1 (MMB30R)
6.0.1 (MOB30W)
.....
I really don't know what are those codes.
Click to expand...
Click to collapse
6.0.1 (MOB30W) is the latest release, that's the one you will want to download and install.

I again. I get an error when i execute the flash-all.bat from windows. Is there a way to flash all via twrp without using adb? I uncompressed image there, flashed ok bootloader, radio, but system always get an error...
Please help. Thanks.

Execute the commands manually. flash-all.bat is notorious for being flaky. However, why are we stressing here? This is a developer's device and nobody is going to care that you are rooted or that you are running a custom ROM. In short, I have yet to hear of anyone being refused warranty service because of an unlocked bootloader and custom ROM.

FedericoUY said:
I again. I get an error when i execute the flash-all.bat from windows. Is there a way to flash all via twrp without using adb? I uncompressed image there, flashed ok bootloader, radio, but system always get an error...
Please help. Thanks.
Click to expand...
Click to collapse
Download FASTBOOT and ADB ZIP , Install Drivers from 15 seconds ADB installer and then move all the extracted factory images to the fastboot containing folder and double click flash-all.bat and it'll do the job.
Links:
1. FASTBOOT & ADB..
2. 15 Sec ADB Installer[contains fastboot too].
3.Latest fastboot Images [MOB30W][6.0.1]

I ended up doing it via manual fastboot. My screen phone after being splitting screen for a long time, ended up getting a completly blurry screen. Could not find anyone that happened this same issue. Will have to send the phone to warranty. Thanks

Any ToT file for disabling big cores?

Hello everyone.
Unfortunately my lg g4 bootlooped. And after extensive Google search, i see that most models have a tot file which disables big cores so u can run the phone on the small cores
Does the T-Mobile variant have such a tot file? if yes then can somebody give me the link? if no then can somebody create one using the following info?
Agimax said:
Why not just edit the files below for the two large cores (if you have root):
/sys/devices/system/cpu/cpu4/online (open file and change from a one to a zero)
/sys/devices/system/cpu/cpu5/online (open file and change from a one to a zero)
You could also just have the startup file do it (can modify the ripped system partition & put back on phone):
etc/dir/init.qcom.post_boot.sh (find your processor code - 8992 and add echo lines there with the rest of the cpu commands)
Click to expand...
Click to collapse
Please I'd be highly thankful if someone can help

XeniX_Force said:
Hello everyone.
Unfortunately my lg g4 bootlooped. And after extensive Google search, i see that most models have a tot file which disables big cores so u can run the phone on the small cores
Does the T-Mobile variant have such a tot file? if yes then can somebody give me the link? if no then can somebody create one using the following info?
Please I'd be highly thankful if someone can help
Click to expand...
Click to collapse
no such thing for any american variant

raptorddd said:
no such thing for any american variant
Click to expand...
Click to collapse
Cant someone with a working G4 crate one? i quoted a person who has given the way how to...

XeniX_Force said:
Cant someone with a working G4 crate one? i quoted a person who has given the way how to...
Click to expand...
Click to collapse
not sure . i cant...
sort of read this quickly does this help.? https://www.xda-developers.com/nexus-6p-bootloop-fix/

raptorddd said:
not sure . i cant...
sort of read this quickly does this help.? https://www.xda-developers.com/nexus-6p-bootloop-fix/
Click to expand...
Click to collapse
Well he also created modified boot images which disable the big cores. Can't someone create that for our device?
maybe @steadfasterX can

XeniX_Force said:
Well he also created modified boot images which disable the big cores. Can't someone create that for our device?
maybe @steadfasterX can
Click to expand...
Click to collapse
TWRP installed?
Then u could just modify the init file but I believe its too late. once bootlooping the run is over afaik.
.

steadfasterX said:
TWRP installed?
Then u could just modify the init file but I believe its too late. once bootlooping the run is over afaik.
.
Click to expand...
Click to collapse
yeah I'm bootlooped
Someone also fixed the Nexus 6 bootloop by creating modified images which disable the big cores.
Can't we(mostly you, you're the big dev) create a similar modified image that we can flash through LGUP?

XeniX_Force said:
yeah I'm bootlooped
Someone also fixed the Nexus 6 bootloop by creating modified images which disable the big cores.
Can't we(mostly you, you're the big dev) create a similar modified image that we can flash through LGUP?
Click to expand...
Click to collapse
you may have overseen it but I asked: TWRP installed?
and new question: bootloader unlocked?
I can't create TOT files
.

steadfasterX said:
you may have overseen it but I asked: TWRP installed?
and new question: bootloader unlocked?
I can't create TOT files
.
Click to expand...
Click to collapse
I'm bootlooped. can't reach anything except download mode
and yeah bootloader was unlocked.
oh you can't create tot files? aren't they just system images?

XeniX_Force said:
I'm bootlooped. can't reach anything except download mode
and yeah bootloader was unlocked.
oh you can't create tot files? aren't they just system images?
Click to expand...
Click to collapse
Afaik you need a box to create tot files.
Besides this I have never created any big core disabling but I know @the_naxhoo has.
if you can reach the download mode you could flash with the lglaf shell a modified boot image which is doing the job. If you do not have Linux get your copy of FWUL which has everything on board (like the lglaf shell).
The modded boot image has to disable the cores either by the cmdline or the sys echo or both. I saw that cmdline thing during my unlock attempts and think those are much better then the echo to sys..
Creating a kdz would be maybe possible
creating a TWRP zip for sure but I'm very very busy at the moment...
So just one more time (as still not answered.. ) do you had TWRP installed before the bootloop occurs?
...and If so what happens when you try to get into it?
.
Sent from my LG-H815 using XDA Labs

steadfasterX said:
Afaik you need a box to create tot files.
Besides this I have never created any big core disabling but I know @the_naxhoo has.
if you can reach the download mode you could flash with the lglaf shell a modified boot image which is doing the job. If you do not have Linux get your copy of FWUL which has everything on board (like the lglaf shell).
The modded boot image has to disable the cores either by the cmdline or the sys echo or both. I saw that cmdline thing during my unlock attempts and think those are much better then the echo to sys..
Creating a kdz would be maybe possible
creating a TWRP zip for sure but I'm very very busy at the moment...
So just one more time (as still not answered.. ) do you had TWRP installed before the bootloop occurs?
...and If so what happens when you try to get into it?
.
Click to expand...
Click to collapse
i had twrp but now when i try to access twrp i get to wipe everything screen which then hangs when I choose yes
yeah I can get FWUL but i need steps to know what to do....
I even asked @XCnathan32 who just fixed the Nexus 6p bootloop to have a look into our device maybe he can benefit from this information u just posted.

XeniX_Force said:
i had twrp but now when i try to access twrp i get to wipe everything screen which then hangs when I choose yes
yeah I can get FWUL but i need steps to know what to do....
I even asked @XCnathan32 who just fixed the Nexus 6p bootloop to have a look into our device maybe he can benefit from this information u just posted.
Click to expand...
Click to collapse
Cmdline is how I disabled the cores on the Nexus, the fix is easy to do on a boot.img, but LG uses the KDZ files, which use a totally different file structure, and I'm not sure if the LG flash tool has file checks, even on unlocked bootloaders. I will do some research and see what I can do. If anyone has any knowledge on modifying kdz files, please tell me.

XCnathan32 said:
Cmdline is how I disabled the cores on the Nexus, the fix is easy to do on a boot.img, but LG uses the KDZ files, which use a totally different file structure, and I'm not sure if the LG flash tool has file checks, even on unlocked bootloaders. I will do some research and see what I can do. If anyone has any knowledge on modifying kdz files, please tell me.
Click to expand...
Click to collapse
asked steadfasterx about kdz and his reply is as follows
steadfasterX said:
me too. never created KDZs yet but there are tools for it - afaik.
My first approach would have been to flash the boot image in the download mode with the lglaf shell (https://github.com/steadfasterX/lglaf/tree/g4) .
requires to do a flash of a modified boot image with dd on /dev/block/mmcblk0 with the correct seek ..
.
Click to expand...
Click to collapse

XCnathan32 said:
Cmdline is how I disabled the cores on the Nexus, the fix is easy to do on a boot.img, but LG uses the KDZ files, which use a totally different file structure, and I'm not sure if the LG flash tool has file checks, even on unlocked bootloaders. I will do some research and see what I can do. If anyone has any knowledge on modifying kdz files, please tell me.
Click to expand...
Click to collapse
you may take a look on this: https://forum.xda-developers.com/showthread.php?t=2179431
not sure if that works though.. (quite old)
.

steadfasterX said:
you may take a look on this: https://forum.xda-developers.com/showthread.php?t=2179431
not sure if that works though..
.
Click to expand...
Click to collapse
But cant we just create a modified boot img and twrp img and flash through lglaf. then flash a rom zip though twrp?

XeniX_Force said:
But cant we just create a modified boot img and twrp img and flash through lglaf. then flash a rom zip though twrp?
Click to expand...
Click to collapse
sure thats what I said before
.

steadfasterX said:
sure thats what I said before
.
Click to expand...
Click to collapse
can u provide a stock boot img for Nathan to edit?

XeniX_Force said:
can u provide a stock boot img for Nathan to edit?
Click to expand...
Click to collapse
sure what was your installed ROM and version? best would be a link to it as well..
.

steadfasterX said:
sure what was your installed ROM and version? best would be a link to it as well..
.
Click to expand...
Click to collapse
stock. i was using lineage but I returned to stock and got bootloop after some days.

XeniX_Force said:
stock. i was using lineage but I returned to stock and got bootloop after some days.
Click to expand...
Click to collapse
tell me the exact version. v10h, v10n, v20g, v20o .. there are dozens of versions out there..
.

[XT1789-05] Stock OREO Firmware (retbr)

Hey dudes,
since no one ever did this, I uploaded all Oreo Stock (retbr) for or beloved XT1789-05 released so far.
Here are the link:
https://www.dropbox.com/sh/emeuwiyaxpqqu56/AABKMNnrmMOwR5S0pBH2d7lWa?dl=0
The folder also contains RSD-lite for Mac and Linux users.
Enjoy.
if you are a Linux or Mac user and don't know how to use RSD, *I'll show you how to do with simple steps.
here we go:
1- Unzip the RSD-lite folder on your desktop;
2- Unzip the firmware zip and copy all files to the RSD folder on your desktop;
3- Open your terminal and go to the RSD-lite folder and connect your cellphone on USB with USB DEBUBBING ON;
4- Type this commands and hit ENTER after every line:
adb reboot bootloader
if you are on Linux;
bash rsd-flash.sh flashfile.xml
if you are on Mac:
./rsd-flash.sh flashfile.xml
press enter to start the flash from terminal
5- Watch for any errors. If no errors at the end of the script then press enter to reboot the device.
Many thanks to @Liboicl for the Linix script and @rootjunky for Mac script.

I'll keep adding the firmware on this folder as soon they pop up .

Does it flash to both slots? If not, this won't prepare the -05 model for AOSP ROMs. The T-Mobile flash all and Sprint ones flash to both slots via .sh or .bat files

Uzephi said:
Does it flash to both slots? If not, this won't prepare the -05 model for AOSP ROMs. The T-Mobile flash all and Sprint ones flash to both slots via .sh or .bat files
Click to expand...
Click to collapse
It flash both partitions, the script just compile all fastboot comands

darthxa said:
It flash both partitions, the script just compile all fastboot comands
Click to expand...
Click to collapse
So if you do "fastboot --set-active=_b" it will boot to system just fine?

Uzephi said:
So if you do "fastboot --set-active=_b" it will boot to system just fine?
Click to expand...
Click to collapse
As soon I get home I'll Test and do do sure

Uzephi said:
So if you do "fastboot --set-active=_b" it will boot to system just fine?
Click to expand...
Click to collapse
That's what I got
Perhaps it's because I have patched boot image in system B
But if that helped...

darthxa said:
That's what I got
Perhaps it's because I have patched boot image in system B
But if that helped...
Click to expand...
Click to collapse
That happened because the bootloader noticed slot B doesn't have Oreo firmware on it. I'll make a .sh and .bat for you in a couple of days for AOSP from the files in that zip. It will be firmware only, no system or OEM images as it will be for AOSP prep more than back to stock.

Uzephi said:
That happened because the bootloader noticed slot B doesn't have Oreo firmware on it. I'll make a .sh and .bat for you in a couple of days for AOSP from the files in that zip. It will be firmware only, no system or OEM images as it will be for AOSP prep more than back to stock.
Click to expand...
Click to collapse
Let me ask you, do you know if this particular model is eu version or America version? I'm trying install twrp ....

darthxa said:
Let me ask you, do you know if this particular model is eu version or America version? I'm trying install twrp ....
Click to expand...
Click to collapse
Installing twrp shouldn't matter the model. Just boot to twrp and flash the zip, it will edit your current boot image and not mess with any special properties like radio stuff that differ from model to model.

Hello. The new firmware has been released with the March patch NASH_OPXS27.109-34-7_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip. Would you kindly be able to post the link? Thanks!!!

solocchi said:
Hello. The new firmware has been released with the March patch NASH_OPXS27.109-34-7_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip. Would you kindly be able to post the link? Thanks!!!
Click to expand...
Click to collapse
Hi, I found it here https://plus.google.com/communities...1/stream/74c3716d-1a33-42b4-a515-63f32f4401e1, specificially in this post https://plus.google.com/111081030652026277798/posts/APCeCosyCX3 just by searching for exactly the filename you provided above with google.

Thanks for the link. I already know it but it doesn't work. I tried again and appear the message: access denied.
If you can download it and share it could be great.

solocchi said:
Thanks for the link. I already know it but it doesn't work. I tried again and appear the message: access denied.
If you can download it and share it could be great.
Click to expand...
Click to collapse
it's weird, i've got 2 pc, 1 access denied and download fine for the other

ilovemeow said:
it's weird, i've got 2 pc, 1 access denied and download fine for the other
Click to expand...
Click to collapse
I can not with any pc. If you have downloaded the firmware I would ask you kindly to post it. Thank you.

solocchi said:
I can not with any pc. If you have downloaded the firmware I would ask you kindly to post it. Thank you.
Click to expand...
Click to collapse
http://myown1gbb2.ddns.net:13955/sharing/sQf3mIAgr
password: MotoZ2ForceXT1789

ilovemeow said:
http://myown1gbb2.ddns.net:13955/sharing/sQf3mIAgr
password: MotoZ2ForceXT1789
Click to expand...
Click to collapse
Thanks!!!

darthxa said:
... for our beloved XT1789-05 ...
Click to expand...
Click to collapse
I wouldn't go as far as beloved
For me, this is actually the worst Moto phone I've ever owned (and I've owned 4 of them), specially by the price I paid for it... the phone doesn't worth not even half the price.
In fact, this is my last Moto ever, I'm done with Moto/Lenovo or any other Chinese crap for that matter.

Uzephi said:
I'll make a .sh and .bat for you in a couple of days for AOSP from the files in that zip.
Click to expand...
Click to collapse
I don't mean to push you or anything, I'm just curious if you were able to make the .bat/.sh file for this version (retbr)?

felipevsw said:
I don't mean to push you or anything, I'm just curious if you were able to make the .bat/.sh file for this version (retbr)?
Click to expand...
Click to collapse
My bat file in my thread will only work with official releases from the Motorola Firmware Team (MFT). I.E. with the official firmware and my .bat you will be able to take OTAs again. I cannot guarantee any other zips.

[ROM] Stock B12 and B13 QFIL flashable packages

Here is the QPST packages for the Maven 3
This is the B12 firmware package (Z835V2.0.0B12) with all files needed to flash it including the firehose, provided by me.
https://www.androidfilehost.com/?fid=1395089523397891431
Do not flash B13 if you are on V2.0.0 older build it will cause issues with your phone.
This is a B13 firmware package (Z835V1.0.0B13) with only the actual firmware images no support files to flash it, which seems to have been dumped from a phone with a 3rd party tool. You should be able to take my files and replace them with these. But I have not tested that. Provided by @robert200794 just mirrored to a less annoying site
https://www.androidfilehost.com/?fid=1395089523397891438
Please be careful using these files because if you are not careful you run the risk of bricking your phone.
To see how to flash these files please see this thread

Thank you Firmware stock Z835
update my Z835V2.0.0b10 to Z835V2.0.0B12 (Beware of Z835V1.0.0B13 Older Firmware)

Alijosekt said:
Thank you Firmware stock Z835
update my Z835V2.0.0b10 to Z835V2.0.0B12 (Beware of Z835V1.0.0B13 Older Firmware)
Click to expand...
Click to collapse
Put a warning into the OP to mention that thanks

My phone z835 dead boot any one can help me pllz......?
My phone z835 dead boot any one can help me pllz......?

Shareef alariqi said:
My phone z835 dead boot any one can help me pllz......?
Click to expand...
Click to collapse
red led, black screen FTM?

Is black screen
Is black screen and i can't to enter in ftm.

interesting thread... i found my old zte

Thanks for this, I have a question, if my phone has Z835V1.0.0B13 fw can I just install your B12 firmware package (Z835V2.0.0B12) and that won't be a problem?

sim unlock
Can i unlock sim in this? sorry for my question

Auto Rotation Not Working Properly !!!

Guys, some auto rotate work but mostly it not. Whether, am on custom or stock ROM.
Please help me with this issue.
How to make auto rotate work perfectly?? Or I should go to service centre???

did you ever upgrade to Q rom then downgrade back to pie because this causes this sensor issue. And you have to flash back original miui version to get sensors working again

sam00561 said:
did you ever upgrade to Q rom then downgrade back to pie because this causes this sensor issue. And you have to flash back original miui version to get sensors working again
Click to expand...
Click to collapse
Yes. Now so what I have to do??? Flash q ROM or pie ROM with fastboot. Pls let me know bro

If you were on pie then flash back to that one and it should fix. Please be careful not to select clean and lock in mi flash settings. Only select clean all.

sam00561 said:
If you were on pie then flash back to that one and it should fix. Please be careful not to select clean and lock in mi flash settings. Only select clean all.
Click to expand...
Click to collapse
You mean miui q ROM.

Basically flash back the rom which came with your phone I assume that would have been pie .

sam00561 said:
Basically flash back the rom which came with your phone I assume that would have been pie .
Click to expand...
Click to collapse
Yes it was pie but I don't know version. So can I flash q rom.
Am already on miui pie

I think it might not work like that I think you have to flash back to pie first then you can flash to Q. And where did you buy the phone.

sam00561 said:
I think it might not work like that I think you have to flash back to pie first then you can flash to Q. And where did you buy the phone.
Click to expand...
Click to collapse
Buyed from flipkart

gurwinderr84 said:
Buyed from flipkart
Click to expand...
Click to collapse
Are you in India

sam00561 said:
Are you in India
Click to expand...
Click to collapse
Hnji, India

I had this exact same issue this week and I fixed it now I'll be happy to help you fix it too.
here's some question and I want them answered fully to expedite the process
what's your rom version number and is it Global, Eu, China?
Are you using orange fox recovery?
don't worry it's easy to fix once you know how =)

kitsune_snake said:
I had this exact same issue this week and I fixed it now I'll be happy to help you fix it too.
here's some question and I want them answered fully to expedite the process
what's your rom version number and is it Global, Eu, China?
Are you using orange fox recovery?
don't worry it's easy to fix once you know how =)
Click to expand...
Click to collapse
He's in India so likely best option is the stable India rom to flash. I tried posting the link but xda won't allow.

kitsune_snake said:
I had this exact same issue this week and I fixed it now I'll be happy to help you fix it too.
here's some question and I want them answered fully to expedite the process
what's your rom version number and is it Global, Eu, China?
Are you using orange fox recovery?
don't worry it's easy to fix once you know how =)
Click to expand...
Click to collapse
Am on India miui 10.3.5.0 using oragefox recovery

kitsune_snake said:
I had this exact same issue this week and I fixed it now I'll be happy to help you fix it too.
here's some question and I want them answered fully to expedite the process
what's your rom version number and is it Global, Eu, China?
Are you using orange fox recovery?
don't worry it's easy to fix once you know how =)
Click to expand...
Click to collapse
Please tell me solution

Wow are you still trying to fix this issue can you join the k20 pro telegram group there's many developer in there who can help straight away.

Yes pls help to solve issue

gurwinderr84 said:
Please tell me solution
Click to expand...
Click to collapse
Okay, so when you updated to Q and then reverted back to P you messed up the persist.img, it's a part of the phone that regulates many sensor with the proper value.
what we need to do is fix the persist.img, luckily Orange fox will help up in that regard!
So first things first we need to get a replacement persist.img
Start by booting into Orange fox and make a backup of everything except internal storage.
go to https://xiaomifirmwareupdater.com/miui/raphael/ and get the latest china rom for fastboot (at the time of this writing, it's V10.3.17.0.PFKCNXM )
Once it has finished downloading open it like a zip using 7zip, inside should be a .TAR file, open it again like a zip and inside that unarchived TAR file should be a folder called "image" and within that one, will be a file called "persist.img".
Take the persist file and put it in your phone's storage, in orange fox select the file and options will be presented to you as to where to flash the image file, select of course the persist partition.
after this wipe cache and reboot.
The first boot will have a couple of issues, the phone will need to recalibrate itself, follow the instructions on the screen (open the front camera, clibrate gyro, etc).
After that you should be all set my friend

kitsune_snake said:
Okay, so when you updated to Q and then reverted back to P you messed up the persist.img, it's a part of the phone that regulates many sensor with the proper value.
what we need to do is fix the persist.img, luckily Orange fox will help up in that regard!
So first things first we need to get a replacement persist.img
Start by booting into Orange fox and make a backup of everything except internal storage.
go to https://xiaomifirmwareupdater.com/miui/raphael/ and get the latest china rom for fastboot (at the time of this writing, it's V10.3.17.0.PFKCNXM )
Once it has finished downloading open it like a zip using 7zip, inside should be a .TAR file, open it again like a zip and inside that unarchived TAR file should be a folder called "image" and within that one, will be a file called "persist.img".
Take the persist file and put it in your phone's storage, in orange fox select the file and options will be presented to you as to where to flash the image file, select of course the persist partition.
after this wipe cache and reboot.
The first boot will have a couple of issues, the phone will need to recalibrate itself, follow the instructions on the screen (open the front camera, clibrate gyro, etc).
After that you should be all set my friend
Click to expand...
Click to collapse
Where to flash persist.img from orangefox recovery ?? System or Vendor??? Flash 2 time fastboot ROM but not solved out the issue. Also, by mistake on 3rd attempt got bootloader locked. So, now what I do??

gurwinderr84 said:
Where to flash persist.img from orangefox recovery ?? System or Vendor??? Flash 2 time fastboot ROM but not solved out the issue. Also, by mistake on 3rd attempt got bootloader locked. So, now what I do??
Click to expand...
Click to collapse
Allright, first I never mentionned anything about flashing a fastboot rom, so you need to take it easy and follow instructions attentively (don't panic it's all gonna be okay)
Since you relocked your bootloader you just have to unlock it again using the many guides posted on this forum (I will not help you with this since there's already plenty of thread on the subject)
after your bootloader is back to an unlocked state, you re-installed OrangeFox and you flashed the ROM you want follow the procedure I typed to the letter and you'll be fine.
As for how to flash the "persist.img". In the "files" tab in OrangeFox just tap on the "persist.img" file and in the window that opens you will have a chance to select to which partition you wanna flash the file (you need of course to select the "persist" partition)