Unlock Semi-Normal Android Usage
On the 201006.099 Teams & Others build you can turn on adb which lets you remove the teams/kiosk launcher and have a normal Android 8.1 interface.
On the 200628.084 Teams & Others build it already has adb on by default so you can skip Steps 5-8
If you have a Teams Edition new in box adb should work on that firmware.
Flash a Teams & Others build following the firmware flash guide below
When it boots up select Teams (Others seems to try and network boot/download files and fails)
Go through the setup wizard until you get to the Microsoft Teams (Language > Wifi > Bluetooth > Teams)
Select the Gear Icon in the top right of the teams page
Select the "About" settings option
Tap on "CD-18781Y.200628.084" under firmware version a bunch of times rapidly until a prompt comes up saying developer unlocked.
If your usb c cable is plugged in unplug and replug it in
You will now have ADB access
Download your desired Launcher and use the following command to install it:
Code:
adb install APK_FILE_NAME.apk
You will then need to send this adb command to select a new default launcher:
Code:
adb shell am start -a android.intent.action.MAIN -c android.intent.category.HOME
I would recommend getting a Button Remap app due to there not being a Nav bar currently. I have found Vol+ single click mapped to back and long press mapped to Home works well.
If you get stuck an app before you get a back button, send the command from step 10 to go back to the launcher.
Bootloader Unlocking Do not do it for now
If you unlock the bootloader your device will only boot EDL or Fastboot. Any other mode will drop the device into Qcom 900E. To fix the device boot to fastboot and relock the bootloader (fastboot oem lock or fastboot flashing lock)
Unplug the device
Hold Vol- and plug in the device (Smart Plugs can make this easier)
fastboot oem unlock-go
Convert Teams Edition to Zoom Edition or vice-versa
Follow the flashing guide below just grab either the Zoom or Teams firmware. ADB enable will only work on Teams Versions. I have not found a way to do it on the Zoom firmware.
Flashing the Lenovo firmware
(Windows) QFIL
Download and install the Qualcomm drivers from here
Download the teams/zoom flash package from below
Extract the firmware to a folder that you can easily access them from like your desktop
Download and install QPST from here
Open the QFIL application (Find it in your start menu)
In the "Select Build Type" field select Flat Build
In the "Select Programmer" field navigate to the folder you extracted the firmware and support files to and select the prog_emmc_firehose_8953_ddr.mbn file
Select the "Load XML" button and navigate to the folder you extracted the firmware and support files to and select the rawprogram_unsparse.xml and then the patch0.xml when prompted.
Remove the cover on the USB-C port on the bottom right of your device
Plug the Usb C cable into your computer
Unplug the power from the device
Hold vol+ and Vol- and then plug the power into your device (Smart Plugs can make this easier)
If the text at the top of the QFIL application mentions qdloader move on to next step. If it says "No Port Available" click the "Select Port..." option and pick your device. If your device isn't showing up there you most likely didn't install the drivers properly.
Click the Download Button to begin flashing your device
Once complete it should automatically reboot but sometimes it doesn't so you need to replug your device.
(Linux, Mac, Advanced Windows)
Use Bkerler's Amazing EDL Toolkit Here
Downloads
Firehose/Rawprogram by themselves
here
210602.2103 Zoom Firmware (Latest no ADB)
here
210228.109 Teams Firmware (Latest no ADB)
here
201006.099 Teams & Others (Has the ability too turn on ADB)
here
200628.084 Teams & Others (ADB Turned on by default)
here
191011.0035 Kingston Userdebug (Qcom Diag Mode active, No ADB)
(Designed for developers, limited features DO NOT USE)
here
Root, TWRP, Playstore, Custom Webview can be found at @Chewie610's thread
here
Credit: @WhyPartyPizza on reddit for the adb enable steps
Notes
Boot buttons
Vol- plus Power plug in = Fastboot
Vol+ plus Power plug in = Recovery
Vol+ and Vol- plus power plug in = EDL
Even after EDL flashing firmware when unlocked it still drops into 900E. I also tested flashing unsigned images when bootloader locked but it does not boot as expected.
wau....thank you
i have got gratis some devices ... i want to use it as internet radio / player
Now i have question.
How to run my launcher after startup? My device starts to black sreen and i must start launcher via adb
...default launcher is set.
Btw do you know if is possible to root it?
EDIT: ...i have installed via adb Virtual Softkeys (no root).apk. It runs automatically after reboot (needed swipe for view it), then press home....and launcher starts
flash firmware failed
"
2022-04-11 22:20:24.770 Sahara mappings:
2022-04-11 22:20:24.770 2: amss.mbn
2022-04-11 22:20:24.770 6: apps.mbn
2022-04-11 22:20:24.770 8: dsp1.mbn
2022-04-11 22:20:24.785 10: dbl.mbn
2022-04-11 22:20:24.785 11: osbl.mbn
2022-04-11 22:20:24.785 12: dsp2.mbn
2022-04-11 22:20:24.785 16: efs1.mbn
2022-04-11 22:20:24.785 17: efs2.mbn
2022-04-11 22:20:24.785 20: efs3.mbn
2022-04-11 22:20:24.785 21: sbl1.mbn
2022-04-11 22:20:24.785 22: sbl2.mbn
2022-04-11 22:20:24.785 23: rpm.mbn
2022-04-11 22:20:24.785 25: tz.mbn
2022-04-11 22:20:24.785 28: dsp3.mbn
2022-04-11 22:20:24.785 29: acdb.mbn
2022-04-11 22:20:24.785 30: wdt.mbn
2022-04-11 22:20:24.801 31: mba.mbn
2022-04-11 22:20:24.801 13: C:\image\prog_emmc_firehose_8953_ddr.mbn
2022-04-11 22:20:24.801
2022-04-11 22:20:24.801 22:20:24: ERROR: function: sahara_rx_data:287 Command packet length 1702240364 too large to fit
2022-04-11 22:20:24.801
2022-04-11 22:20:24.801 22:20:24: ERROR: function: sahara_main:983 Sahara protocol error
2022-04-11 22:20:24.801
2022-04-11 22:20:24.801 22:20:24: ERROR: function: main:320 Uploading Image using Sahara protocol failed
2022-04-11 22:20:24.801
2022-04-11 22:20:24.801
2022-04-11 22:20:24.816 Download Fail:Sahara Fail:QSaharaServer Failrocess fail
2022-04-11 22:20:24.816 Finish Download
"
22:20:24: ERROR: function: sahara_rx_data:287 Command packet length 1702240364 too large to fit
Anyone has idea ?
cgigate said:
flash firmware failed
"
2022-04-11 22:20:24.770 Sahara mappings:
2022-04-11 22:20:24.770 2: amss.mbn
2022-04-11 22:20:24.770 6: apps.mbn
2022-04-11 22:20:24.770 8: dsp1.mbn
2022-04-11 22:20:24.785 10: dbl.mbn
2022-04-11 22:20:24.785 11: osbl.mbn
2022-04-11 22:20:24.785 12: dsp2.mbn
2022-04-11 22:20:24.785 16: efs1.mbn
2022-04-11 22:20:24.785 17: efs2.mbn
2022-04-11 22:20:24.785 20: efs3.mbn
2022-04-11 22:20:24.785 21: sbl1.mbn
2022-04-11 22:20:24.785 22: sbl2.mbn
2022-04-11 22:20:24.785 23: rpm.mbn
2022-04-11 22:20:24.785 25: tz.mbn
2022-04-11 22:20:24.785 28: dsp3.mbn
2022-04-11 22:20:24.785 29: acdb.mbn
2022-04-11 22:20:24.785 30: wdt.mbn
2022-04-11 22:20:24.801 31: mba.mbn
2022-04-11 22:20:24.801 13: C:\image\prog_emmc_firehose_8953_ddr.mbn
2022-04-11 22:20:24.801
2022-04-11 22:20:24.801 22:20:24: ERROR: function: sahara_rx_data:287 Command packet length 1702240364 too large to fit
2022-04-11 22:20:24.801
2022-04-11 22:20:24.801 22:20:24: ERROR: function: sahara_main:983 Sahara protocol error
2022-04-11 22:20:24.801
2022-04-11 22:20:24.801 22:20:24: ERROR: function: main:320 Uploading Image using Sahara protocol failed
2022-04-11 22:20:24.801
2022-04-11 22:20:24.801
2022-04-11 22:20:24.816 Download Fail:Sahara Fail:QSaharaServer Failrocess fail
2022-04-11 22:20:24.816 Finish Download
"
22:20:24: ERROR: function: sahara_rx_data:287 Command packet length 1702240364 too large to fit
Anyone has idea ?
Click to expand...
Click to collapse
Hmmm...maybe different emmc capacity? Have you flashed 201006.099 ?
cgigate said:
flash firmware failed
"
2022-04-11 22:20:24.770 Sahara mappings:
2022-04-11 22:20:24.770 2: amss.mbn
2022-04-11 22:20:24.770 6: apps.mbn
2022-04-11 22:20:24.770 8: dsp1.mbn
2022-04-11 22:20:24.785 10: dbl.mbn
2022-04-11 22:20:24.785 11: osbl.mbn
2022-04-11 22:20:24.785 12: dsp2.mbn
2022-04-11 22:20:24.785 16: efs1.mbn
2022-04-11 22:20:24.785 17: efs2.mbn
2022-04-11 22:20:24.785 20: efs3.mbn
2022-04-11 22:20:24.785 21: sbl1.mbn
2022-04-11 22:20:24.785 22: sbl2.mbn
2022-04-11 22:20:24.785 23: rpm.mbn
2022-04-11 22:20:24.785 25: tz.mbn
2022-04-11 22:20:24.785 28: dsp3.mbn
2022-04-11 22:20:24.785 29: acdb.mbn
2022-04-11 22:20:24.785 30: wdt.mbn
2022-04-11 22:20:24.801 31: mba.mbn
2022-04-11 22:20:24.801 13: C:\image\prog_emmc_firehose_8953_ddr.mbn
2022-04-11 22:20:24.801
2022-04-11 22:20:24.801 22:20:24: ERROR: function: sahara_rx_data:287 Command packet length 1702240364 too large to fit
2022-04-11 22:20:24.801
2022-04-11 22:20:24.801 22:20:24: ERROR: function: sahara_main:983 Sahara protocol error
2022-04-11 22:20:24.801
2022-04-11 22:20:24.801 22:20:24: ERROR: function: main:320 Uploading Image using Sahara protocol failed
2022-04-11 22:20:24.801
2022-04-11 22:20:24.801
2022-04-11 22:20:24.816 Download Fail:Sahara Fail:QSaharaServer Failrocess fail
2022-04-11 22:20:24.816 Finish Download
"
22:20:24: ERROR: function: sahara_rx_data:287 Command packet length 1702240364 too large to fit
Anyone has idea ?
Click to expand...
Click to collapse
Hmmm...maybe different emmc capacity? Have you flashed 201006.099 . inside mine i have 8gb emmc
CornholioGSM said:
Hmmm...maybe different emmc capacity? Have you flashed 201006.099 . inside mine i have 8gb emmc
Click to expand...
Click to collapse
tested all available firmware, all failed
cgigate said:
tested all available firmware, all failed
Click to expand...
Click to collapse
Oki oki...have you installed correct driver? ...what you see inside device manager? If you use w10...have you run QFIL as admin?
I have for flashing w7 laptop...no problems with drivers etc
I got one of these to use as a smart display, it's on a firmware version between the 2 reported here as allowing ADB, activating ADB works on this also so I set everything up, is there any advantage to flashing the newer version that supports ADB from here?
Did anyone try booting a GSI with bootloader unlocked or booting the stock firmware with a Magisk patched boot image?
Ranomez said:
I got one of these to use as a smart display, it's on a firmware version between the 2 reported here as allowing ADB, activating ADB works on this also so I set everything up, is there any advantage to flashing the newer version that supports ADB from here?
Did anyone try booting a GSI with bootloader unlocked or booting the stock firmware with a Magisk patched boot image?
Click to expand...
Click to collapse
Currently bootloader unlocking makes the device only boot into EDL or fastboot. Even if you reflash the firmware. The only way to get out of it is to relock the bootloader. I have not tested if partitions are being verified when locked. But I would guess and assume it would fail to boot. But it is worth a try you can edl flash to recover.
For updating if adb works and you don't plan on using the teams/zoom software itself there is no point on updating.
deadman96385 said:
Currently bootloader unlocking makes the device only boot into EDL or fastboot. Even if you reflash the firmware. The only way to get out of it is to relock the bootloader. I have not tested if partitions are being verified when locked. But I would guess and assume it would fail to boot. But it is worth a try you can edl flash to recover.
For updating if adb works and you don't plan on using the teams/zoom software itself there is no point on updating.
Click to expand...
Click to collapse
Alright, thank you.
I was asking about Magisk or a GSI with bootloader unlocked cause the check that makes it not boot may be in the kernel. I don't exactly have the time to test right now but I will towards the end of August.
Do we have any idea what tool to use to unpack the firmware yet?
I'd actually like to update the Teams app to latest cause I use it for university (if it'll even allow me to connect with a student account) and I have a Zoom account which I randomly use with friends so having that here would be useful as well.
Ranomez said:
Alright, thank you.
I was asking about Magisk or a GSI with bootloader unlocked cause the check that makes it not boot may be in the kernel. I don't exactly have the time to test right now but I will towards the end of August.
Do we have any idea what tool to use to unpack the firmware yet?
I'd actually like to update the Teams app to latest cause I use it for university (if it'll even allow me to connect with a student account) and I have a Zoom account which I randomly use with friends so having that here would be useful as well.
Click to expand...
Click to collapse
I don't believe a student account will work for teams. It requires enterprise IT to add the devices to accounts. But your zoom account should work if you flash over to that firmware.
Dumpyara which uses firmware_extractor can extract the the firmware zips I have linked in OP
GitHub - AndroidDumps/dumpyara
Contribute to AndroidDumps/dumpyara development by creating an account on GitHub.
github.com
GitHub - AndroidDumps/Firmware_extractor
Contribute to AndroidDumps/Firmware_extractor development by creating an account on GitHub.
github.com
deadman96385 said:
I don't believe a student account will work for teams. It requires enterprise IT to add the devices to accounts. But your zoom account should work if you flash over to that firmware.
Dumpyara which uses firmware_extractor can extract the the firmware zips I have linked in OP
GitHub - AndroidDumps/dumpyara
Contribute to AndroidDumps/dumpyara development by creating an account on GitHub.
github.com
GitHub - AndroidDumps/Firmware_extractor
Contribute to AndroidDumps/Firmware_extractor development by creating an account on GitHub.
github.com
Click to expand...
Click to collapse
Thanks, I'll try extracting the apks from the Zoom version to install on the current Teams with ADB firmware I have, I'll report back if that works.
Ignore me I'm a bit braindead, thank you for this wonderful thread.
So my progress currently is that I have uninstalled Kiosk, Lenovo Bloat, Teams & the weird settings thing and installed a button remapper, Nova launcher and Chrome.
Now it works perfectly for playing videos via browser YouTube, havent yet tried getting YouTube itself running. And I have back button via volume plus + volume minus.
Works awesomely and I can't thank this firmware enough. Got the machine for 34eur brand newish.
yesBad said:
So my progress currently is that I have uninstalled Kiosk, Lenovo Bloat, Teams & the weird settings thing and installed a button remapper, Nova launcher and Chrome.
Now it works perfectly for playing videos via browser YouTube, havent yet tried getting YouTube itself running. And I have back button via volume plus + volume minus.
Works awesomely and I can't thank this firmware enough. Got the machine for 34eur brand newish.
Click to expand...
Click to collapse
Nice, i too got a set just today and it was very easy to get it working!
Youtube won't work as there's no GMS in it.
What i did was download vanced manager, installed the microG apk and then Vanced apk and that worked!
thanks it works just had to roll back my unit to .084, now need to figure out what apps i need to load make it more usable
Amazing! Got this to work perfectly - I'm curious... what is everyone using there devices for?
I'd like to use it as a bedside nightstand showing clock/weather etc, but unsure what good apps to use?
yesBad said:
So my progress currently is that I have uninstalled Kiosk, Lenovo Bloat, Teams & the weird settings thing and installed a button remapper, Nova launcher and Chrome.
Now it works perfectly for playing videos via browser YouTube, havent yet tried getting YouTube itself running. And I have back button via volume plus + volume minus.
Works awesomely and I can't thank this firmware enough. Got the machine for 34eur brand newish.
Click to expand...
Click to collapse
yesBad said:
So my progress currently is that I have uninstalled Kiosk, Lenovo Bloat, Teams & the weird settings thing and installed a button remapper, Nova launcher and Chrome.
Now it works perfectly for playing videos via browser YouTube, havent yet tried getting YouTube itself running. And I have back button via volume plus + volume minus.
Works awesomely and I can't thank this firmware enough. Got the machine for 34eur brand newish.
Click to expand...
Click to collapse
Hi can you please assist.
I have flashed 201006.099 Teams & Others build.
How did you uninstalled Kiosk, Lenovo Bloat, Teams & the weird settings thing.
Recently I got two of these devices. Assumed they where just cheap "normal" tablets.
I've learned a lot since then......
Flashed both devices to 201006.099, thanks to the excellent guide in the first post
Deinstalled a whole lot of stuff: (Just stuff I didn´t need for my purpose)
adb shell
pm uninstall -k --user 0 com.microsoft.skype.teams.ipphone
pm uninstall -k --user 0 com.kingston.kioskmodeapp
pm uninstall -k --user 0 jp.co.fsi.fskaren.lenovo
pm uninstall -k --user 0 com.microsoft.windowsintune.companyportal
pm uninstall -k --user 0 com.microsoft.teams.ipphone.admin.agent
pm uninstall -k --user 0 com.kingston.devicesettings
pm uninstall -k --user 0 com.android.music
pm uninstall -k --user 0 com.android.deskclock
pm uninstall -k --user 0 com.android.contacts
pm uninstall -k --user 0 com.android.providers.calendar
pm uninstall -k --user 0 com.android.calendar
pm uninstall -k --user 0 org.codeaurora.snapcam
pm uninstall -k --user 0 com.android.quicksearchbox
Installed F-Droid:
adb install F-Droid.apk
From F-Droid install keymapper and aurora store
Configures the volume keys to home and back.
From Aurora store install the stuff you need from the playstore. As simple as that!
Related
Hi all,
So I gave my tablet to a friend to "fix" some issues. I had hdmi not working, and the battery meter wouldnt drain. I had the latest CM11 nightly on it.
Long story short, he formatted everything in the mounts and storage menu in clockwork recovery. Now the screen of course just stays on the Asus loading screen. I can get into recovery, but I cant find my external sd card etc. I cant find any of my zips. Any suggestions?
Can you access sideload und push a cm zip via adb?
tschmid said:
Can you access sideload und push a cm zip via adb?
Click to expand...
Click to collapse
Sort of. ADB seems to only somewhat work. When I try to adb push cm11.zip or adb sideload cm11.zip. It only seems to get up to about 17% then fails.
Maybee sdbags or pershot can help you but i'll also think more about this
kuthedude said:
Sort of. ADB seems to only somewhat work. When I try to adb push cm11.zip or adb sideload cm11.zip. It only seems to get up to about 17% then fails.
Click to expand...
Click to collapse
tschmid said:
Maybee sdbags or pershot can help you but i'll also think more about this
Click to expand...
Click to collapse
Provide the recovery.log from /tmp and also a logcat over adb of the boot process.
The failing to push could either be a driver issue or a bad partition on the device.
sbdags said:
Provide the recovery.log from /tmp and also a logcat over adb of the boot process.
The failing to push could either be a driver issue or a bad partition on the device.
Click to expand...
Click to collapse
This is what I get from logcat:
"adb server is out of date. killing...
* daemon started successfully *
/sbin/sh: exec: line 1: logcat: not found"
I think I am entering the command right: adb logcat > prob.txt
Here is the recovery.log:
__bionic_open_tzdata: couldn't find any tzdata when looking for localtime!
__bionic_open_tzdata: couldn't find any tzdata when looking for GMT!
__bionic_open_tzdata: couldn't find any tzdata when looking for posixrules!
Starting recovery on Fri Jul 25 21:09:34 2014
can't open /dev/tty0: No such file or directory
framebuffer: fd 3 (2560 x 1600)
CWM-based Recovery v6.0.5.0
recovery filesystem table
=========================
0 /recovery emmc /dev/block/platform/sdhci-tegra.3/by-name/SOS 0
1 /boot emmc /dev/block/platform/sdhci-tegra.3/by-name/LNX 0
2 /system ext4 /dev/block/platform/sdhci-tegra.3/by-name/APP 0
3 /cache ext4 /dev/block/platform/sdhci-tegra.3/by-name/CAC 0
4 /data ext4 /dev/block/platform/sdhci-tegra.3/by-name/UDA 0
5 /metadata emmc /dev/block/platform/sdhci-tegra.3/by-name/MDA 0
6 /misc emmc /dev/block/platform/sdhci-tegra.3/by-name/MSC 0
7 /staging emmc /dev/block/platform/sdhci-tegra.3/by-name/USP 0
8 /storage/sdcard1 auto /devices/platform/sdhci-tegra.2/mmc_host/mmc1 0
9 /storage/usbdisk1 auto /devices/platform/tegra-xhci/usb1/1-2/1-2.2/1-2.2:1.0 0
10 /storage/usbdisk2 auto /devices/platform/tegra-ehci.2/usb1/1-1/1-1.1 0
11 /storage/sdcard2 auto /devices/platform/tegra-xhci/usb1/1-2/1-2.3/1-2.3:1.0 0
12 /tmp ramdisk ramdisk 0
W:Unable to get recovery.fstab info for /datadata during fstab generation!
W:Unable to get recovery.fstab info for /emmc during fstab generation!
W:Unable to get recovery.fstab info for /sdcard during fstab generation!
W:Unable to get recovery.fstab info for /sd-ext during fstab generation!
W:Unable to get recovery.fstab info for /external_sd during fstab generation!
I:Completed outputting fstab.
I:Connected to Vold..
I:110 0 sdcard1 /storage/sdcard1 1 -
I:110 0 usbdisk1 /storage/usbdisk1 0 -
I:110 0 usbdisk1 /storage/usbdisk1 0 -
I:110 0 usbdisk1 /storage/usbdisk1 0 -
I:110 0 usbdisk1 /storage/usbdisk1 0 -
I:110 0 usbdisk1 /storage/usbdisk1 0 -
I:110 0 usbdisk1 /storage/usbdisk1 0 -
I:110 0 usbdisk1 /storage/usbdisk1 0 -
I:110 0 usbdisk2 /storage/usbdisk2 0 -
I:110 0 sdcard2 /storage/sdcard2 0 -
I:110 0 sdcard2 /storage/sdcard2 0 -
I:200 0 Volumes listed.
Irocessing arguments.
I:Checking arguments.
I:device_recovery_start()
Command: "/sbin/recovery"
ro.cm.device=tf701t
ro.cm.display.version=11-20140718-UNOFFICIAL-tf701t
ro.cm.version=11-20140718-UNOFFICIAL-tf701t
ro.cm.releasetype=UNOFFICIAL
ro.sf.lcd_density=320
ro.com.google.clientidbase=android-google
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.com.android.wifi-watchlist=GoogleGuest
ro.cwm.enable_key_repeat=true
ro.ril.wake_lock_timeout=200000
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.boot.emmc=0
ro.boot.mode=normal
ro.boot.modem=none
ro.boot.hardware=macallan
ro.boot.serialno=15C3E1007000000000CFF8180
ro.boot.productid=mozart
ro.boot.commchip_id=0
ro.emmc=0
ro.wifi.channels=
ro.allow.mock.location=0
ro.board.platform=tegra
ro.build.id=KTU84Q
ro.build.date=Thu Jul 17 20:55:59 EDT 2014
ro.build.date.utc=0
ro.build.epad.project=TF501T
ro.build.host=pershoot-ubuntu
ro.build.tags=test-keys
ro.build.type=userdebug
ro.build.user=root
ro.build.display.id=cm_tf701t-userdebug 4.4.4 KTU84Q a39fdd2dee test-keys
ro.build.product=tf701t
ro.build.selinux=1
ro.build.version.sdk=19
ro.build.version.release=4.4.4
ro.build.version.codename=REL
ro.build.version.incremental=a39fdd2dee
ro.build.description=US_epad-user 4.3 JSS15J US_epad-10.26.1.18-20131217 release-keys
ro.build.fingerprint=asus/US_epad/K00C:4.3/JSS15J/US_epad-10.26.1.18-20131217:user/release-keys
ro.build.characteristics=tablet
ro.radio.noril=true
ro.config.alarm_alert=Hassium.ogg
ro.config.notification_sound=Argon.ogg
ro.secure=1
ro.zygote.disable_gl_preload=true
ro.carrier=unknown
ro.cmlegal.url=http://www.cyanogenmod.org/docs/privacy
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.name=K00C
ro.product.board=macallan
ro.product.brand=asus
ro.product.model=K00C
ro.product.device=tf701t
ro.product.locale.region=US
ro.product.locale.language=en
ro.product.manufacturer=asus
ro.baseband=unknown
ro.bootmode=normal
ro.hardware=macallan
ro.opengles.version=131072
ro.revision=0
ro.serialno=15C3E1007000000000CFF8180
ro.bootloader=unknown
ro.debuggable=1
ro.modversion=11-20140718-UNOFFICIAL-tf701t
ro.rommanager.developerid=cyanogenmod
ro.factorytest=0
ro.setupwizard.enterprise_mode=1
tf.enable=y
drm.service.enabled=true
net.bt.name=Android
net.change=net.bt.name
init.svc.adbd=running
init.svc.vold=running
init.svc.healthd=running
init.svc.ueventd=running
init.svc.recovery=running
init.svc.setup_adbd=stopped
rild.libargs=-e rmnet0
rild.libpath=/system/lib/libril-icera.so
wifi.interface=wlan0
debug.hwui.render_dirty_regions=false
dalvik.vm.heapsize=512m
dalvik.vm.lockprof.threshold=500
dalvik.vm.heapmaxfree=8m
dalvik.vm.heapminfree=512k
dalvik.vm.dexopt-flags=m=y
dalvik.vm.heapstartsize=16m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.heaptargetutilization=0.75
persist.sys.dun.override=0
persist.sys.usb.config=mtp,adb
persist.sys.dalvik.vm.lib=libdvm.so
persist.sys.root_access=1
persist.sys.recovery_update=false
persist.tegra.nvmmlite=1
service.adb.root=1
keyguard.no_require_sim=true
I:Checking for extendedcommand...
I:Skipping execution of extendedcommand, file not found...
sbdags said:
Provide the recovery.log from /tmp and also a logcat over adb of the boot process.
The failing to push could either be a driver issue or a bad partition on the device.
Click to expand...
Click to collapse
Also if this, if this helps:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
kuthedude said:
Also if this, if this helps:
Click to expand...
Click to collapse
Any ideas?
Yes you are in serious trouble.
You need to reformat your partitions - try this thread.
http://forum.xda-developers.com/showpost.php?p=47933481&postcount=1
sbdags said:
Yes you are in serious trouble.
You need to reformat your partitions - try this thread.
http://forum.xda-developers.com/showpost.php?p=47933481&postcount=1
Click to expand...
Click to collapse
Where can I get these files:
UL-K00C-xx-10.14.1.47-user.zip (on micro SD card in TF701)
10.14.1.47 blob and boot.img (unpacked from UL-K00C-xx-10.14.1.47-user.zip)
kuthedude said:
Where can I get these files:
UL-K00C-xx-10.14.1.47-user.zip (on micro SD card in TF701)
Click to expand...
Click to collapse
I think that is Asus stock firmware. You can download it on Asus official site: http://www.asus.com/Tablets_Mobile/The_New_ASUS_Transformer_PadTF701T/HelpDesk_Download/
kuthedude said:
10.14.1.47 blob and boot.img (unpacked from UL-K00C-xx-10.14.1.47-user.zip)
Click to expand...
Click to collapse
You shoud unpack that ZIP. Necessary files into it.
Trel725 said:
I think that is Asus stock firmware. You can download it on Asus official site: http://www.asus.com/Tablets_Mobile/The_New_ASUS_Transformer_PadTF701T/HelpDesk_Download/
You shoud unpack that ZIP. Necessary files into it.
Click to expand...
Click to collapse
I unpacked everything and followed the fastboot instructions. I am still getting the same errors as before. I have the sd card in, but I cant access it. The only directory I can access in clockwork is /sdcard/0/clockworkmod
The fastboot commands worked fine as they all said "OKAY" after executing.
kuthedude said:
I unpacked everything and followed the fastboot instructions. I am still getting the same errors as before. I have the sd card in, but I cant access it. The only directory I can access in clockwork is /sdcard/0/clockworkmod
The fastboot commands worked fine as they all said "OKAY" after executing.
Click to expand...
Click to collapse
Which fastboot commands?
sbdags said:
Which fastboot commands?
Click to expand...
Click to collapse
fastboot erase boot
fastboot erase staging
fastboot format system
fastboot flash staging blob
fastboot flash boot boot.img
fastboot flash recovery.img
You can try flash full firmware through fastboot. I'll make system.img later, and you should execute:
Code:
fastboot boot system system.img
Which number of firmware you downloaded?
Trel725 said:
You can try flash full firmware through fastboot. I'll make system.img later, and you should execute:
Code:
fastboot boot system system.img
Which number of firmware you downloaded?
Click to expand...
Click to collapse
I downloaded ASUS Transformer Pad(TF701T) Firmware: V10.26.1.18 Only for US SKU (Android 4.3). I owe you beer money if this works.
Try it:
https://mega.co.nz/#!TwYhxY6T!Bc-BSwMoWEDOycIUaHG7LqllqegrrFiZhL2SQjm2t7Y
(Don't remember unpack archive)
Also, I wrote wrong command. Right one is:
Code:
fastboot [B]flash[/B] system system.img
Trel725 said:
Try it:
https://mega.co.nz/#!TwYhxY6T!Bc-BSwMoWEDOycIUaHG7LqllqegrrFiZhL2SQjm2t7Y
Click to expand...
Click to collapse
hm, not working (took off the .lzma file extension):
C:\adt-bundle-windows-x86-20140702\sdk\platform-tools>fastboot boot system syste
m.img
cannot load 'system': No such file or directory
C:\adt-bundle-windows-x86-20140702\sdk\platform-tools>fastboot erase boot
erasing 'boot'...
OKAY [ 0.026s]
finished. total time: 0.029s
C:\adt-bundle-windows-x86-20140702\sdk\platform-tools>fastboot erase staging
erasing 'staging'...
OKAY [ 0.047s]
finished. total time: 0.048s
C:\adt-bundle-windows-x86-20140702\sdk\platform-tools>fastboot format system
Creating filesystem with parameters:
Size: 2147483648
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 8192
Label:
Blocks: 524288
Block groups: 16
Reserved block group size: 127
Created filesystem with 11/131072 inodes and 17193/524288 blocks
target reported max download size of 643825664 bytes
erasing 'system'...
OKAY [ 1.029s]
sending 'system' (35512 KB)...
OKAY [ 4.809s]
writing 'system'...
OKAY [ 1.090s]
finished. total time: 6.935s
C:\adt-bundle-windows-x86-20140702\sdk\platform-tools>fastboot flash staging blo
b
target reported max download size of 643825664 bytes
sending 'staging' (1401 KB)...
OKAY [ 0.210s]
writing 'staging'...
OKAY [ 0.084s]
finished. total time: 0.298s
C:\adt-bundle-windows-x86-20140702\sdk\platform-tools>fastboot boot system syste
m.img
cannot load 'system': No such file or directory
C:\adt-bundle-windows-x86-20140702\sdk\platform-tools>
I was wrong. I edited my last message, try it again. You can don't execute every command from list, just try my command.
Trel725 said:
I was wrong. I edited my last message, try it again. You can don't execute every command from list, just try my command.
Click to expand...
Click to collapse
ok, seemed to complete...but nothing has changed. It does say unrecoverable bootloader on the power on screen. I got into recovery and am still having the same issues. I tried sideloading CM again and still only gets to 15% then fails.
C:\adt-bundle-windows-x86_64-20140702\sdk\platform-tools>fastboot devices
15C3E1007000000000CFF8180 fastboot
C:\adt-bundle-windows-x86_64-20140702\sdk\platform-tools>fastboot flash system s
ystem.img
target reported max download size of 643825664 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 276292249 is not a multiple of t
he block size 4096
erasing 'system'...
OKAY [ 1.277s]
sending sparse 'system' (628732 KB)...
error: write_sparse_skip_chunk: don't care size 276292249 is not a multiple of t
he block size 4096
error: write_sparse_skip_chunk: don't care size 276292249 is not a multiple of t
he block size 4096
OKAY [ 86.585s]
writing 'system'...
OKAY [ 19.487s]
sending sparse 'system' (269820 KB)...
OKAY [ 37.165s]
writing 'system'...
OKAY [ 7.886s]
finished. total time: 152.441s
C:\adt-bundle-windows-x86_64-20140702\sdk\platform-tools>
Hi, i have GM 4G Dual. My phone was bricked, i download LUZ59F_DUOS.zip and flashed. But phone became single sim. Text in about phone: General Mobile 4G. How fix it? Please help me.
forum.one-teams.com/Konu-TOOL-HardbrickFix-General-Mobile-4G-QFIL-HardBrick-Tool
Sorry for my english, i used translator.
Just flash non-hlos.bin for dual
I've already pulled for one-team forum
nhmanas said:
Just flash non-hlos.bin for dual
I've already pulled for one-team forum
Click to expand...
Click to collapse
I flashed CM 13 Recover SW QFIL (Wileyfox Swift) for dual sim work, later i found Dual Sim QFIL Firmware (GM 4G Dual), now it is impossible to install the LUZ59F_DUOS and Dual Sim QFIL Firmware (GM 4G Dual). But CM 13 Recover SW QFIL (Wileyfox Swift) flasing successfully. I used normal and modified cable. How fix it? Please help!!!
QFIL Log:
HTML:
Validating Application Configuration
Load APP Configuration
COM:-1
SAHARA:True
SAHARA:C:\Users\XXX\Downloads\Compressed\SW\main\prog_emmc_firehose_8916.mbn
SEARCHPATH:C:\Users\XXX\Downloads\Compressed\SW\main
RAWPROGRAM:
rawprogram_upgrade.xml
PATCH:
patch0.xml
ACKRAWDATAEVERYNUMPACKETS:False
ACKRAWDATAEVERYNUMPACKETS:100
MAXPAYLOADSIZETOTARGETINBYTES:False
MAXPAYLOADSIZETOTARGETINBYTES:49152
DEVICETYPE:eMMC
PLATFORM:8x26
READBACKMODE:0
RESETAFTERDOWNLOAD:False
MAXDIGESTTABLESIZE:8192
SWITCHTOFIREHOSETIMEOUT:30
RESETTIMEOUT:200
RESETDELAYTIME:2
FLATBUILDPATH:C:\
FLATBUILDFORCEOVERRIDE:True
QCNPATH:C:\Temp\00000000.qcn
QCNAUTOBACKUPRESTORE:False
SPCCODE:000000
ENABLEMULTISIM:True
Load ARG Configuration
Process Index:0
Validating Download Configuration
Image Search Path: C:\Users\XXX\Downloads\Compressed\SW\main
RAWPROGRAM file path: C:\Users\XXX\Downloads\Compressed\SW\main\rawprogram_upgrade.xml
PATCH file path:C:\Users\XXX\Downloads\Compressed\SW\main\patch0.xml
Programmer Path:C:\Users\XXX\Downloads\Compressed\SW\main\prog_emmc_firehose_8916.mbn
Image Search Path: C:\Users\XXX\Downloads\Compressed\SW\main
RAWPROGRAM file path: C:\Users\XXX\Downloads\Compressed\SW\main\rawprogram_upgrade.xml
PATCH file path:C:\Users\XXX\Downloads\Compressed\SW\main\patch0.xml
Start Download
Program Path:C:\Users\XXX\Downloads\Compressed\SW\main\prog_emmc_firehose_8916.mbn
COM Port number:4
Sahara Connecting ...
Sahara Version:2
Start Sending Programmer
Download Fail:Unable to download Flash Programmer using Sahara Protocol
Download Fail:Sahara FailSahara Fail
Finish Download
TigOne said:
I flashed CM 13 Recover SW QFIL (Wileyfox Swift) for dual sim work, later i found Dual Sim QFIL Firmware (GM 4G Dual), now it is impossible to install the LUZ59F_DUOS and Dual Sim QFIL Firmware (GM 4G Dual). But CM 13 Recover SW QFIL (Wileyfox Swift) flasing successfully. I used normal and modified cable. How fix it? Please help!!!
QFIL Log:
HTML:
Validating Application Configuration
Load APP Configuration
COM:-1
SAHARA:True
SAHARA:C:\Users\XXX\Downloads\Compressed\SW\main\prog_emmc_firehose_8916.mbn
SEARCHPATH:C:\Users\XXX\Downloads\Compressed\SW\main
RAWPROGRAM:
rawprogram_upgrade.xml
PATCH:
patch0.xml
ACKRAWDATAEVERYNUMPACKETS:False
ACKRAWDATAEVERYNUMPACKETS:100
MAXPAYLOADSIZETOTARGETINBYTES:False
MAXPAYLOADSIZETOTARGETINBYTES:49152
DEVICETYPE:eMMC
PLATFORM:8x26
READBACKMODE:0
RESETAFTERDOWNLOAD:False
MAXDIGESTTABLESIZE:8192
SWITCHTOFIREHOSETIMEOUT:30
RESETTIMEOUT:200
RESETDELAYTIME:2
FLATBUILDPATH:C:\
FLATBUILDFORCEOVERRIDE:True
QCNPATH:C:\Temp\00000000.qcn
QCNAUTOBACKUPRESTORE:False
SPCCODE:000000
ENABLEMULTISIM:True
Load ARG Configuration
Process Index:0
Validating Download Configuration
Image Search Path: C:\Users\XXX\Downloads\Compressed\SW\main
RAWPROGRAM file path: C:\Users\XXX\Downloads\Compressed\SW\main\rawprogram_upgrade.xml
PATCH file path:C:\Users\XXX\Downloads\Compressed\SW\main\patch0.xml
Programmer Path:C:\Users\XXX\Downloads\Compressed\SW\main\prog_emmc_firehose_8916.mbn
Image Search Path: C:\Users\XXX\Downloads\Compressed\SW\main
RAWPROGRAM file path: C:\Users\XXX\Downloads\Compressed\SW\main\rawprogram_upgrade.xml
PATCH file path:C:\Users\XXX\Downloads\Compressed\SW\main\patch0.xml
Start Download
Program Path:C:\Users\XXX\Downloads\Compressed\SW\main\prog_emmc_firehose_8916.mbn
COM Port number:4
Sahara Connecting ...
Sahara Version:2
Start Sending Programmer
Download Fail:Unable to download Flash Programmer using Sahara Protocol
Download Fail:Sahara FailSahara Fail
Finish Download
Click to expand...
Click to collapse
well pal.. I don't understand a thing.. I see that you are Turkish. PM me in Turkish. We are not allowed to use any other language but English on xda forums.
nhmanas said:
well pal.. I don't understand a thing.. I see that you are Turkish. PM me in Turkish. We are not allowed to use any other language but English on xda forums.
Click to expand...
Click to collapse
You can make a copy of the system, for the HDD RAW Copy or eMMC Raw Tool? Please share me!
TigOne said:
You can make a copy of the system, for the HDD RAW Copy or eMMC Raw Tool? Please share me!
Click to expand...
Click to collapse
the link for CM 13 Recover SW QFIL is not working, can you post it again. I have a wileyfox swift that is bricked
Unbrick Guide For Asus Zenfone Max M1
Requirements
PC With Installed Qualcomm, ADB & Fastboot Drivers
A Data Cable
Bricked Device
Firmware Link Below
Method 1:- Flashing Raw Firmware In EDL Mode Port 9008> Download The Raw Firmware File And Extract It
GoogleDrive
> Download QFIL/QPST And Install It
Google Drive
Or Download From Somewhere else xD
> Open QFIL Application
> Click On Flat Build And Select Your Device Port (Should Be In Port 9008)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
> Click On Browse
> Go To Directory Where You Have Extracted Firmware
> prog_emmc_firehose_XXX_ddr.mbn (According To SoC)
> Click On Load XML
> Select rawprogram0_XXXX (According To SoC)
> Select patch0_XXXX (According To SoC)
> Click On Download
> If error
> Wait Till Complete
Method 2:- Flashing Raw Firmware In Fastboot Mode> Download The Raw Firmware File
GoogleDrive
Or
ShareOverAir
> Extract ZIP File
> Connect Your Device In Fastboot Mode
> Open Folder And Find .bat file
8937.bat - For Snapdragon 430
8917.bat - For Snapdragon 425
> Run .bat File According To Your Chipest
> Wait Till It Finish The Procces
> Your Device Will Boot Automatically To System
> Be Patient First Boot Takes Time ?
Method 3:- Flashing Recovery ROM• Need SD Card
> Download The Recovery Firmware File
Asus Website
> Copy it In SD Card
> Download Stock Recovery And Flash it
Stock Recovery
> Open Command Using Shift+Right Click.
> Connect Your Device In Fastboot Mode
> Fastboot flash recovery recovery_file_name*.img
> Fastboot boot recovery_file_name.img
> Select The Option Update Via SD Card
> Select The Firmware You Have downloaded
> Wait Till It Flash
> After Flashing Done , Reboot To System
Join Us On Telegram
Reserved
i have got issues with the qpst tool it detects th qualcom 9008 port and it starts downloading boot img and recover and the fsome files but when it comes to system it gets failed the sahara fails heres the log
2019-05-02 01:44:06.063 Start Download
2019-05-02 01:44:06.080 Program Path:C:\Users\ADITYA BEHERA\Downloads\Compressed\ASUS_X00PD_WW_User_V1.0B66_DL\prog_emmc_firehose_8937_ddr.mbn
2019-05-02 01:44:06.091 ***** Working Folder:C:\Users\ADITYA BEHERA\AppData\Roaming\Qualcomm\QFIL\COMPORT_7
2019-05-02 01:44:06.165 Binary build date: Nov 21 2017 @ 02:53:37
2019-05-02 01:44:06.166 QSAHARASERVER CALLED LIKE THIS: 'C:\Users\ADITYA BEHERA\Downloads\Qualcomm_Flash_Image_Loader_v2.0.1.9\QSaharaServer.ex'Current working dir: C:\Users\ADITYA BEHERA\AppData\Roaming\Qualcomm\QFIL\COMPORT_7
2019-05-02 01:44:06.171 Sahara mappings:
2019-05-02 01:44:06.172 2: amss.mbn
2019-05-02 01:44:06.173 6: apps.mbn
2019-05-02 01:44:06.174 8: dsp1.mbn
2019-05-02 01:44:06.174 10: dbl.mbn
2019-05-02 01:44:06.175 11: osbl.mbn
2019-05-02 01:44:06.176 12: dsp2.mbn
2019-05-02 01:44:06.176 16: efs1.mbn
2019-05-02 01:44:06.177 17: efs2.mbn
2019-05-02 01:44:06.178 20: efs3.mbn
2019-05-02 01:44:06.179 21: sbl1.mbn
2019-05-02 01:44:06.180 22: sbl2.mbn
2019-05-02 01:44:06.181 23: rpm.mbn
2019-05-02 01:44:06.182 25: tz.mbn
2019-05-02 01:44:06.182 28: dsp3.mbn
2019-05-02 01:44:06.183 29: acdb.mbn
2019-05-02 01:44:06.184 30: wdt.mbn
2019-05-02 01:44:06.185 31: mba.mbn
2019-05-02 01:44:06.185 13: C:\Users\ADITYA BEHERA\Downloads\Compressed\ASUS_X00PD_WW_User_V1.0B66_DL\prog_emmc_firehose_8937_ddr.mbn
2019-05-02 01:44:06.187
2019-05-02 01:44:06.187 01:44:06: ERROR: function: is_ack_successful:991 SAHARA_NAK_INVALID_CMD
2019-05-02 01:44:06.188
2019-05-02 01:44:06.189 01:44:06: ERROR: function: sahara_start:895 Exiting abruptly
2019-05-02 01:44:06.190
2019-05-02 01:44:06.191 01:44:06: ERROR: function: sahara_main:924 Sahara protocol error
2019-05-02 01:44:06.192
2019-05-02 01:44:06.192 01:44:06: ERROR: function: main:303 Uploading Image using Sahara protocol failed
2019-05-02 01:44:06.193
2019-05-02 01:44:06.194
2019-05-02 01:44:06.197 Download Fail:Sahara Fail:QSaharaServer Failrocess fail
2019-05-02 01:44:06.198 Finish Download
this is the first log attempt 1 after that i tried another time and it gets something different heres the log of attempt 2
2019-05-02 01:51:15.906 Binary build date: Nov 21 2017 @ 02:53:37
2019-05-02 01:51:15.906 QSAHARASERVER CALLED LIKE THIS: 'C:\Users\ADITYA BEHERA\Downloads\Qualcomm_Flash_Image_Loader_v2.0.1.9\QSaharaServer.ex'Current working dir: C:\Users\ADITYA BEHERA\AppData\Roaming\Qualcomm\QFIL\COMPORT_7
2019-05-02 01:51:15.910 Sahara mappings:
2019-05-02 01:51:15.910 2: amss.mbn
2019-05-02 01:51:15.911 6: apps.mbn
2019-05-02 01:51:15.912 8: dsp1.mbn
2019-05-02 01:51:15.912 10: dbl.mbn
2019-05-02 01:51:15.913 11: osbl.mbn
2019-05-02 01:51:15.913 12: dsp2.mbn
2019-05-02 01:51:15.914 16: efs1.mbn
2019-05-02 01:51:15.915 17: efs2.mbn
2019-05-02 01:51:15.916 20: efs3.mbn
2019-05-02 01:51:15.917 21: sbl1.mbn
2019-05-02 01:51:15.918 22: sbl2.mbn
2019-05-02 01:51:15.919 23: rpm.mbn
2019-05-02 01:51:15.919 25: tz.mbn
2019-05-02 01:51:15.920 28: dsp3.mbn
2019-05-02 01:51:15.921 29: acdb.mbn
2019-05-02 01:51:15.922 30: wdt.mbn
2019-05-02 01:51:15.922 31: mba.mbn
2019-05-02 01:51:15.923 13: C:\Users\ADITYA BEHERA\Downloads\Compressed\ASUS_X00PD_WW_User_V1.0B66_DL\prog_emmc_firehose_8937_ddr.mbn
2019-05-02 01:51:15.924
2019-05-02 01:51:15.925 01:51:15: ERROR: function: sahara_rx_data:237 Unable to read packet header. Only read 0 bytes.
2019-05-02 01:51:15.926
2019-05-02 01:51:15.927 01:51:15: ERROR: function: sahara_main:924 Sahara protocol error
2019-05-02 01:51:15.928
2019-05-02 01:51:15.928 01:51:15: ERROR: function: main:303 Uploading Image using Sahara protocol failed
2019-05-02 01:51:15.929
2019-05-02 01:51:15.930
2019-05-02 01:51:15.931 Download Fail:Sahara Fail:QSaharaServer Failrocess fail
2019-05-02 01:51:15.931 Finish Download
any one knows any kind of solution i got bricked thank you in advance and i was using qpst tool version 2.0.1.9
Shepotter# said:
i have got issues with the qpst tool it detects th qualcom 9008 port and it starts downloading boot img and recover and the fsome files but when it comes to system it gets failed the sahara fails heres the log
2019-05-02 01:44:06.063 Start Download
2019-05-02 01:44:06.080 Program Path:C:\Users\ADITYA BEHERA\Downloads\Compressed\ASUS_X00PD_WW_User_V1.0B66_DL\prog_emmc_firehose_8937_ddr.mbn
2019-05-02 01:44:06.091 ***** Working Folder:C:\Users\ADITYA BEHERA\AppData\Roaming\Qualcomm\QFIL\COMPORT_7
2019-05-02 01:44:06.165 Binary build date: Nov 21 2017 @ 02:53:37
2019-05-02 01:44:06.166 QSAHARASERVER CALLED LIKE THIS: 'C:\Users\ADITYA BEHERA\Downloads\Qualcomm_Flash_Image_Loader_v2.0.1.9\QSaharaServer.ex'Current working dir: C:\Users\ADITYA BEHERA\AppData\Roaming\Qualcomm\QFIL\COMPORT_7
2019-05-02 01:44:06.171 Sahara mappings:
2019-05-02 01:44:06.172 2: amss.mbn
2019-05-02 01:44:06.173 6: apps.mbn
2019-05-02 01:44:06.174 8: dsp1.mbn
2019-05-02 01:44:06.174 10: dbl.mbn
2019-05-02 01:44:06.175 11: osbl.mbn
2019-05-02 01:44:06.176 12: dsp2.mbn
2019-05-02 01:44:06.176 16: efs1.mbn
2019-05-02 01:44:06.177 17: efs2.mbn
2019-05-02 01:44:06.178 20: efs3.mbn
2019-05-02 01:44:06.179 21: sbl1.mbn
2019-05-02 01:44:06.180 22: sbl2.mbn
2019-05-02 01:44:06.181 23: rpm.mbn
2019-05-02 01:44:06.182 25: tz.mbn
2019-05-02 01:44:06.182 28: dsp3.mbn
2019-05-02 01:44:06.183 29: acdb.mbn
2019-05-02 01:44:06.184 30: wdt.mbn
2019-05-02 01:44:06.185 31: mba.mbn
2019-05-02 01:44:06.185 13: C:\Users\ADITYA BEHERA\Downloads\Compressed\ASUS_X00PD_WW_User_V1.0B66_DL\prog_emmc_firehose_8937_ddr.mbn
2019-05-02 01:44:06.187
2019-05-02 01:44:06.187 01:44:06: ERROR: function: is_ack_successful:991 SAHARA_NAK_INVALID_CMD
2019-05-02 01:44:06.188
2019-05-02 01:44:06.189 01:44:06: ERROR: function: sahara_start:895 Exiting abruptly
2019-05-02 01:44:06.190
2019-05-02 01:44:06.191 01:44:06: ERROR: function: sahara_main:924 Sahara protocol error
2019-05-02 01:44:06.192
2019-05-02 01:44:06.192 01:44:06: ERROR: function: main:303 Uploading Image using Sahara protocol failed
2019-05-02 01:44:06.193
2019-05-02 01:44:06.194
2019-05-02 01:44:06.197 Download Fail:Sahara Fail:QSaharaServer Failrocess fail
2019-05-02 01:44:06.198 Finish Download
this is the first log attempt 1 after that i tried another time and it gets something different heres the log of attempt 2
2019-05-02 01:51:15.906 Binary build date: Nov 21 2017 @ 02:53:37
2019-05-02 01:51:15.906 QSAHARASERVER CALLED LIKE THIS: 'C:\Users\ADITYA BEHERA\Downloads\Qualcomm_Flash_Image_Loader_v2.0.1.9\QSaharaServer.ex'Current working dir: C:\Users\ADITYA BEHERA\AppData\Roaming\Qualcomm\QFIL\COMPORT_7
2019-05-02 01:51:15.910 Sahara mappings:
2019-05-02 01:51:15.910 2: amss.mbn
2019-05-02 01:51:15.911 6: apps.mbn
2019-05-02 01:51:15.912 8: dsp1.mbn
2019-05-02 01:51:15.912 10: dbl.mbn
2019-05-02 01:51:15.913 11: osbl.mbn
2019-05-02 01:51:15.913 12: dsp2.mbn
2019-05-02 01:51:15.914 16: efs1.mbn
2019-05-02 01:51:15.915 17: efs2.mbn
2019-05-02 01:51:15.916 20: efs3.mbn
2019-05-02 01:51:15.917 21: sbl1.mbn
2019-05-02 01:51:15.918 22: sbl2.mbn
2019-05-02 01:51:15.919 23: rpm.mbn
2019-05-02 01:51:15.919 25: tz.mbn
2019-05-02 01:51:15.920 28: dsp3.mbn
2019-05-02 01:51:15.921 29: acdb.mbn
2019-05-02 01:51:15.922 30: wdt.mbn
2019-05-02 01:51:15.922 31: mba.mbn
2019-05-02 01:51:15.923 13: C:\Users\ADITYA BEHERA\Downloads\Compressed\ASUS_X00PD_WW_User_V1.0B66_DL\prog_emmc_firehose_8937_ddr.mbn
2019-05-02 01:51:15.924
2019-05-02 01:51:15.925 01:51:15: ERROR: function: sahara_rx_data:237 Unable to read packet header. Only read 0 bytes.
2019-05-02 01:51:15.926
2019-05-02 01:51:15.927 01:51:15: ERROR: function: sahara_main:924 Sahara protocol error
2019-05-02 01:51:15.928
2019-05-02 01:51:15.928 01:51:15: ERROR: function: main:303 Uploading Image using Sahara protocol failed
2019-05-02 01:51:15.929
2019-05-02 01:51:15.930
2019-05-02 01:51:15.931 Download Fail:Sahara Fail:QSaharaServer Failrocess fail
2019-05-02 01:51:15.931 Finish Download
any one knows any kind of solution i got bricked thank you in advance and i was using qpst tool version 2.0.1.9
Click to expand...
Click to collapse
Try different version and u should connect with internet while flashing
It worked when I used qpst 2.0.1.7 and you have to rename the firmware folder making sure that there is no space in the name of the firmware that is given in the above post otherwise Sahara fails error will appear again and again this should do your work
Shepotter# said:
It worked when I used qpst 2.0.1.7 and you have to rename the firmware folder making sure that there is no space in the name of the firmware that is given in the above post otherwise Sahara fails error will appear again and again this should do your work
Click to expand...
Click to collapse
What rename?
Biggest thing I've found that causes Sahara and other failures is Windows built in antivirus system, turn it completely off, and you're almost 100 percent more likely to have a successful flash.
Mr.turbo9000 said:
Biggest thing I've found that causes Sahara and other failures is Windows built in antivirus system, turn it completely off, and you're almost 100 percent more likely to have a successful flash.
Click to expand...
Click to collapse
o:
Help pls
I have somehow damaged the phone while flashing twrp recovery, because after flashing twrp recovery my phone doesn't seems to boot up, it alwasy redirects me to fastboot mode, but when i enter the TWRP Recover mode, it open that mode. I think i have messed up the OS or the Stock rom. Can anybody tell me wht is the solution for this pls. I have the zenfone asus_x00pd zb556kl model of Max M1. Please help me i really need it.
Krishb99 said:
I have somehow damaged the phone while flashing twrp recovery, because after flashing twrp recovery my phone doesn't seems to boot up, it alwasy redirects me to fastboot mode, but when i enter the TWRP Recover mode, it open that mode. I think i have messed up the OS or the Stock rom. Can anybody tell me wht is the solution for this pls. I have the zenfone asus_x00pd zb556kl model of Max M1. Please help me i really need it.
Click to expand...
Click to collapse
Message me
Twrp flash Ausu X00PD Max M1
Thanks alot guys, this forum really saved my neck.
I used the second method & got my problem resolved. I think, i might be have had done something wrong after installing Twrp Recovery, now i used the 2nd method, flashed my device with adb stock firmware provided & my phone finally boot up, but it erased all my data, so i had to do reflash the recovery with Twrp. Thanks a lot fellas u guys r real saviers
Everything was a success... but my phone was still dead
after installation twrp and upgrade the phone to pie, is dead, qfil see the com, (19), but fails!, what do I do?,I put the firmware in bin folder,also in C,I renamed the folder,firmware or asus,but nofhing!
Help,please!,I used QFIL 1.0.0.2 and 2.0.1.9,with the same result....
subhendumahapatra said:
Is there any way to relock bootloader of Asus Zenfone Max M1.( not Zenfone Max Pro M1)
After flashing when I open play store settings it shows device is not certified.
Click to expand...
Click to collapse
Flash pie then do
Run command fastboot oem lock
Then Flash oreo flahs files and run same command to lock
Still you will not getting FOTA
mariocaraf said:
after installation twrp and upgrade the phone to pie, is dead, qfil see the com, (19), but fails!, what do I do?,I put the firmware in bin folder,also in C,I renamed the folder,firmware or asus,but nofhing!
Help,please!,I used QFIL 1.0.0.2 and 2.0.1.9,with the same result....
Click to expand...
Click to collapse
What error
raza231198 said:
What error
Click to expand...
Click to collapse
Sahara Fail ,
as always!!!
mariocaraf said:
Sahara Fail ,
as always!!!
Click to expand...
Click to collapse
Connect to internet
raza231198 said:
Connect to internet
Click to expand...
Click to collapse
I'm always connected to the internet, I tried with 2 PCs, but nothing !, my phone had the bootloader unlocked, will it be the fault of that?
qfil screen:
https://ibb.co/mFL2v5J
edit:
I solved, I had read, Select 8917 for 2GB RAM
select 8937 for 3GB RAM, my phone has 3gb ram, but with 8937 no flash, with 8917 all ok!
Strange!
except that the microphone works to record audio, not for calls.
following the instructions on this web page, I no longer had errors with qfil, the page is in Italian,
There is GOOGLE TRANSLATOR.
LINK:
https://www.rennagiuseppe.it/zuk-z2-guida/
my phone got stucked while flashing with twrp ,
just can use edl mode nothing works .
i tried many time with many program and git (qfil - miracle - qualcomm) almost same error:
HTML:
2020-05-26 08:58:14.346 Validating Application Configuration
2020-05-26 08:58:14.361 Load APP Configuration
2020-05-26 08:58:14.408 COM:4
2020-05-26 08:58:14.408 PBLDOWNLOADPROTOCOL:0
2020-05-26 08:58:14.408 PROGRAMMER:True
2020-05-26 08:58:14.408 PROGRAMMER:H:\QFIL\NB1-0-484A-prog_ufs_firehose_8998_ddr.elf
2020-05-26 08:58:14.408 RESETSAHARASTATEMACHINE:False
2020-05-26 08:58:14.408 SAHARAREADSERIALNO:False
2020-05-26 08:58:14.408 SEARCHPATH:H:\QFIL
2020-05-26 08:58:14.408 RAWPROGRAM:
2020-05-26 08:58:14.408 NB1-0-484A-rawprogram0.xml
2020-05-26 08:58:14.408 PATCH:
2020-05-26 08:58:14.408 NB1-0-484A-patch0.xml
2020-05-26 08:58:14.424 ACKRAWDATAEVERYNUMPACKETS:False
2020-05-26 08:58:14.424 ACKRAWDATAEVERYNUMPACKETS:100
2020-05-26 08:58:14.424 MAXPAYLOADSIZETOTARGETINBYTES:False
2020-05-26 08:58:14.424 MAXPAYLOADSIZETOTARGETINBYTES:49152
2020-05-26 08:58:14.424 DEVICETYPE:ufs
2020-05-26 08:58:14.424 PLATFORM:8x26
2020-05-26 08:58:14.424 VALIDATIONMODE:0
2020-05-26 08:58:14.424 RESETAFTERDOWNLOAD:True
2020-05-26 08:58:14.424 MAXDIGESTTABLESIZE:8192
2020-05-26 08:58:14.424 SWITCHTOFIREHOSETIMEOUT:30
2020-05-26 08:58:14.424 RESETTIMEOUT:200
2020-05-26 08:58:14.424 RESETDELAYTIME:2
2020-05-26 08:58:14.424 METABUILD:
2020-05-26 08:58:14.424 METABUILD:
2020-05-26 08:58:14.424 FLATBUILDPATH:C:\
2020-05-26 08:58:14.424 FLATBUILDFORCEOVERRIDE:True
2020-05-26 08:58:14.424 QCNPATH:C:\Temp\00000000.qcn
2020-05-26 08:58:14.424 QCNAUTOBACKUPRESTORE:False
2020-05-26 08:58:14.424 SPCCODE:000000
2020-05-26 08:58:14.424 ENABLEMULTISIM:False
2020-05-26 08:58:14.424 AUTOPRESERVEPARTITIONS:False
2020-05-26 08:58:14.424 PARTITIONPRESERVEMODE:0
2020-05-26 08:58:14.424 PRESERVEDPARTITIONS:0
2020-05-26 08:58:14.424 PRESERVEDPARTITIONS:
2020-05-26 08:58:14.424 ERASEALL:False
2020-05-26 08:58:14.424 PROVISIONPROGRAMMERPATH:H:\QFIL\NB1-0-484A-prog_ufs_firehose_8998_ddr.elf
2020-05-26 08:58:14.424 PROVISIONXMLPATH:H:\QFIL\NB1-0-484A-provision_fih.xml
2020-05-26 08:58:14.424 Load ARG Configuration
2020-05-26 08:58:14.611 Validating Download Configuration
2020-05-26 08:58:14.611 Image Search Path: H:\QFIL
2020-05-26 08:58:14.643 RAWPROGRAM file path: H:\QFIL\NB1-0-484A-rawprogram0.xml
2020-05-26 08:58:14.643 PATCH file path:H:\QFIL\NB1-0-484A-patch0.xml
2020-05-26 08:58:14.643 Programmer Path:H:\QFIL\NB1-0-484A-prog_ufs_firehose_8998_ddr.elf
2020-05-26 08:58:16.618 Process Index:0
2020-05-26 08:58:16.681 Qualcomm Flash Image Loader (QFIL) 2.0.2.3
2020-05-26 08:59:13.783 Start Provision
2020-05-26 08:59:13.783 Program Path:H:\Nokia_8_TA-1004_00WW_NB1_600WW_MSM8998_7.1.1_QFIL\Firmware\Program_Def.xml
2020-05-26 08:59:13.877 ***** Working Folder:C:\Users\b3hr4d\AppData\Roaming\Qualcomm\QFIL\COMPORT_4
2020-05-26 08:59:14.361 Binary build date: Apr 27 2018 @ 03:04:33
2020-05-26 08:59:14.361 QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files (x86)\Qualcomm\QPST\bin\QSaharaServer.ex'Current working dir: C:\Users\b3hr4d\AppData\Roaming\Qualcomm\QFIL\COMPORT_4
2020-05-26 08:59:14.408 Sahara mappings:
2020-05-26 08:59:14.408 2: amss.mbn
2020-05-26 08:59:14.408 6: apps.mbn
2020-05-26 08:59:14.408 8: dsp1.mbn
2020-05-26 08:59:14.408 10: dbl.mbn
2020-05-26 08:59:14.408 11: osbl.mbn
2020-05-26 08:59:14.408 12: dsp2.mbn
2020-05-26 08:59:14.408 16: efs1.mbn
2020-05-26 08:59:14.408 17: efs2.mbn
2020-05-26 08:59:14.408 20: efs3.mbn
2020-05-26 08:59:14.408 21: sbl1.mbn
2020-05-26 08:59:14.408 22: sbl2.mbn
2020-05-26 08:59:14.408 23: rpm.mbn
2020-05-26 08:59:14.408 25: tz.mbn
2020-05-26 08:59:14.408 28: dsp3.mbn
2020-05-26 08:59:14.408 29: acdb.mbn
2020-05-26 08:59:14.408 30: wdt.mbn
2020-05-26 08:59:14.408 31: mba.mbn
2020-05-26 08:59:14.408 13: H:\Nokia_8_TA-1004_00WW_NB1_600WW_MSM8998_7.1.1_QFIL\Firmware\Program_Def.xml
2020-05-26 08:59:14.424
2020-05-26 08:59:14.424 08:59:14: Requested ID 13, file: "H:\Nokia_8_TA-1004_00WW_NB1_600WW_MSM8998_7.1.1_QFIL\Firmware\Program_Def.xml"
2020-05-26 08:59:14.424
2020-05-26 08:59:14.424 08:59:14: ERROR: function: is_ack_successful:1145 SAHARA_NAK_INVALID_ELF_HDR
2020-05-26 08:59:14.424
2020-05-26 08:59:14.424 08:59:14: ERROR: function: sahara_start:954 Exiting abruptly
2020-05-26 08:59:14.424
2020-05-26 08:59:14.424 08:59:14: ERROR: function: sahara_main:983 Sahara protocol error
2020-05-26 08:59:14.424
2020-05-26 08:59:14.424 08:59:14: ERROR: function: main:320 Uploading Image using Sahara protocol failed
2020-05-26 08:59:14.424
2020-05-26 08:59:14.424
2020-05-26 08:59:14.439 Provision Fail:Sahara Fail:QSaharaServer Fail:Process fail
2020-05-26 08:59:14.439 Finish Provision
2020-05-26 08:59:14.439 You may need to physically reset the phone manually
2020-05-26 09:01:52.034 Start Provision
2020-05-26 09:01:52.034 Program Path:H:\QFIL\NB1-0-484A-prog_ufs_firehose_8998_ddr.elf
2020-05-26 09:01:52.034 ***** Working Folder:C:\Users\b3hr4d\AppData\Roaming\Qualcomm\QFIL\COMPORT_4
2020-05-26 09:03:43.770 Binary build date: Apr 27 2018 @ 03:04:33
2020-05-26 09:03:43.771 QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files (x86)\Qualcomm\QPST\bin\QSaharaServer.ex'Current working dir: C:\Users\b3hr4d\AppData\Roaming\Qualcomm\QFIL\COMPORT_4
2020-05-26 09:03:43.774 Sahara mappings:
2020-05-26 09:03:43.775 2: amss.mbn
2020-05-26 09:03:43.775 6: apps.mbn
2020-05-26 09:03:43.776 8: dsp1.mbn
2020-05-26 09:03:43.777 10: dbl.mbn
2020-05-26 09:03:43.778 11: osbl.mbn
2020-05-26 09:03:43.778 12: dsp2.mbn
2020-05-26 09:03:43.781 16: efs1.mbn
2020-05-26 09:03:43.783 17: efs2.mbn
2020-05-26 09:03:43.784 20: efs3.mbn
2020-05-26 09:03:43.785 21: sbl1.mbn
2020-05-26 09:03:43.786 22: sbl2.mbn
2020-05-26 09:03:43.787 23: rpm.mbn
2020-05-26 09:03:43.788 25: tz.mbn
2020-05-26 09:03:43.789 28: dsp3.mbn
2020-05-26 09:03:43.790 29: acdb.mbn
2020-05-26 09:03:43.791 30: wdt.mbn
2020-05-26 09:03:43.792 31: mba.mbn
2020-05-26 09:03:43.794 13: H:\QFIL\NB1-0-484A-prog_ufs_firehose_8998_ddr.elf
2020-05-26 09:03:43.795
2020-05-26 09:03:43.796 09:03:43: ERROR: function: sahara_rx_data:277 Unable to read packet header. Only read 0 bytes.
2020-05-26 09:03:43.798
2020-05-26 09:03:43.800 09:03:43: ERROR: function: sahara_main:983 Sahara protocol error
2020-05-26 09:03:43.802
2020-05-26 09:03:43.803 09:03:43: ERROR: function: main:320 Uploading Image using Sahara protocol failed
2020-05-26 09:03:43.804
2020-05-26 09:03:43.805
2020-05-26 09:03:43.806 Provision Fail:Sahara Fail:QSaharaServer Fail:Process fail
2020-05-26 09:03:43.806 Finish Provision
2020-05-26 09:03:43.807 You may need to physically reset the phone manually
best result i got on linux with github.com/bkerler/edl can do it manualy but i dont have enough knowladge about that .
can someone help me please
after some try with another frimware
after some try with another frimware got this erorr :
HTML:
2020-05-26 15:34:47.561 Validating Application Configuration
2020-05-26 15:34:47.575 Load APP Configuration
2020-05-26 15:34:47.598 COM:0
2020-05-26 15:34:47.598 PBLDOWNLOADPROTOCOL:0
2020-05-26 15:34:47.598 PROGRAMMER:True
2020-05-26 15:34:47.598 PROGRAMMER:H:\QFIL\NB1-0-484A-prog_ufs_firehose_8998_ddr.elf
2020-05-26 15:34:47.598 RESETSAHARASTATEMACHINE:False
2020-05-26 15:34:47.598 SAHARAREADSERIALNO:False
2020-05-26 15:34:47.598 SEARCHPATH:H:\QFIL
2020-05-26 15:34:47.598 RAWPROGRAM:
2020-05-26 15:34:47.598 NB1-0-484A-rawprogram0.xml
2020-05-26 15:34:47.598 PATCH:
2020-05-26 15:34:47.598 NB1-0-484A-patch0.xml
2020-05-26 15:34:47.598 ACKRAWDATAEVERYNUMPACKETS:False
2020-05-26 15:34:47.598 ACKRAWDATAEVERYNUMPACKETS:100
2020-05-26 15:34:47.598 MAXPAYLOADSIZETOTARGETINBYTES:False
2020-05-26 15:34:47.598 MAXPAYLOADSIZETOTARGETINBYTES:49152
2020-05-26 15:34:47.598 DEVICETYPE:ufs
2020-05-26 15:34:47.598 PLATFORM:8x26
2020-05-26 15:34:47.598 VALIDATIONMODE:0
2020-05-26 15:34:47.598 RESETAFTERDOWNLOAD:True
2020-05-26 15:34:47.598 MAXDIGESTTABLESIZE:8192
2020-05-26 15:34:47.598 SWITCHTOFIREHOSETIMEOUT:30
2020-05-26 15:34:47.598 RESETTIMEOUT:200
2020-05-26 15:34:47.599 RESETDELAYTIME:2
2020-05-26 15:34:47.599 METABUILD:
2020-05-26 15:34:47.599 METABUILD:
2020-05-26 15:34:47.599 FLATBUILDPATH:C:\
2020-05-26 15:34:47.599 FLATBUILDFORCEOVERRIDE:True
2020-05-26 15:34:47.599 QCNPATH:C:\Temp\00000000.qcn
2020-05-26 15:34:47.599 QCNAUTOBACKUPRESTORE:False
2020-05-26 15:34:47.599 SPCCODE:000000
2020-05-26 15:34:47.599 ENABLEMULTISIM:False
2020-05-26 15:34:47.599 AUTOPRESERVEPARTITIONS:False
2020-05-26 15:34:47.599 PARTITIONPRESERVEMODE:0
2020-05-26 15:34:47.599 PRESERVEDPARTITIONS:0
2020-05-26 15:34:47.599 PRESERVEDPARTITIONS:
2020-05-26 15:34:47.599 ERASEALL:False
2020-05-26 15:34:47.599 PROVISIONPROGRAMMERPATH:H:\QFIL\NB1-0-484A-prog_ufs_firehose_8998_ddr.elf
2020-05-26 15:34:47.599 PROVISIONXMLPATH:H:\QFIL\NB1-0-484A-provision_fih.xml
2020-05-26 15:34:47.600 Load ARG Configuration
2020-05-26 15:34:47.689 Validating Download Configuration
2020-05-26 15:34:47.691 Image Search Path: H:\QFIL
2020-05-26 15:34:47.693 RAWPROGRAM file path: H:\QFIL\NB1-0-484A-rawprogram0.xml
2020-05-26 15:34:47.693 PATCH file path:H:\QFIL\NB1-0-484A-patch0.xml
2020-05-26 15:34:47.693 Programmer Path:H:\QFIL\NB1-0-484A-prog_ufs_firehose_8998_ddr.elf
2020-05-26 15:34:48.565 Process Index:0
2020-05-26 15:34:48.580 Qualcomm Flash Image Loader (QFIL) 2.0.2.3
2020-05-26 15:35:14.146 Start Provision
2020-05-26 15:35:14.231 Program Path:H:\NB1-488B-0-00WW-B04.nb0_unpacked\NB1-0-488B-prog_ufs_firehose_8998_ddr.elf
2020-05-26 15:35:14.275 ***** Working Folder:C:\Users\b3hr4d\AppData\Roaming\Qualcomm\QFIL\COMPORT_4
2020-05-26 15:35:14.625 Binary build date: Apr 27 2018 @ 03:04:33
2020-05-26 15:35:14.626 QSAHARASERVER CALLED LIKE THIS: 'C:\Users\b3hr4d\Desktop\Qualcomm_Flash_Image_Loader_v2.0.2.3\QSaharaServer.ex'Current working dir: C:\Users\b3hr4d\AppData\Roaming\Qualcomm\QFIL\COMPORT_4
2020-05-26 15:35:14.627 Sahara mappings:
2020-05-26 15:35:14.628 2: amss.mbn
2020-05-26 15:35:14.629 6: apps.mbn
2020-05-26 15:35:14.629 8: dsp1.mbn
2020-05-26 15:35:14.630 10: dbl.mbn
2020-05-26 15:35:14.631 11: osbl.mbn
2020-05-26 15:35:14.631 12: dsp2.mbn
2020-05-26 15:35:14.632 16: efs1.mbn
2020-05-26 15:35:14.633 17: efs2.mbn
2020-05-26 15:35:14.633 20: efs3.mbn
2020-05-26 15:35:14.634 21: sbl1.mbn
2020-05-26 15:35:14.634 22: sbl2.mbn
2020-05-26 15:35:14.635 23: rpm.mbn
2020-05-26 15:35:14.635 25: tz.mbn
2020-05-26 15:35:14.636 28: dsp3.mbn
2020-05-26 15:35:14.637 29: acdb.mbn
2020-05-26 15:35:14.637 30: wdt.mbn
2020-05-26 15:35:14.638 31: mba.mbn
2020-05-26 15:35:14.639 13: H:\NB1-488B-0-00WW-B04.nb0_unpacked\NB1-0-488B-prog_ufs_firehose_8998_ddr.elf
2020-05-26 15:35:14.639
2020-05-26 15:35:14.640 15:35:14: Requested ID 13, file: "H:\NB1-488B-0-00WW-B04.nb0_unpacked\NB1-0-488B-prog_ufs_firehose_8998_ddr.elf"
2020-05-26 15:35:14.641
2020-05-26 15:35:14.641 15:35:14: 592464 bytes transferred in 0.172000 seconds (3.2850MBps)
2020-05-26 15:35:14.642
2020-05-26 15:35:14.643
2020-05-26 15:35:14.643
2020-05-26 15:35:14.644 15:35:14: File transferred successfully
2020-05-26 15:35:14.645
2020-05-26 15:35:14.646
2020-05-26 15:35:14.646
2020-05-26 15:35:14.647 15:35:14: Sahara protocol completed
2020-05-26 15:35:14.648 Sending Programmer Finished
2020-05-26 15:35:14.649 Switch To FireHose
2020-05-26 15:35:14.649 Wait for 3 seconds...
2020-05-26 15:35:17.653 Max Payload Size to Target:49152 Bytes
2020-05-26 15:35:17.654 Device Type:ufs
2020-05-26 15:35:17.655 Platform:8x26
2020-05-26 15:35:17.657 Disable Ack Raw Data Every N Packets
2020-05-26 15:35:17.659 Skip Write:False
2020-05-26 15:35:17.661 Always Validate:False
2020-05-26 15:35:17.663 Use Verbose:False
2020-05-26 15:35:17.693 ***** Working Folder:C:\Users\b3hr4d\AppData\Roaming\Qualcomm\QFIL\COMPORT_4
2020-05-26 15:35:17.723 Provision Fail:FireHose Fail:FHLoader Fail:The system cannot find the file specified
2020-05-26 15:35:17.725 Finish Provision
2020-05-26 15:35:17.725 You may need to physically reset the phone manually
Behraddj said:
after some try with another frimware
after some try with another frimware got this erorr :
HTML:
2020-05-26 15:34:47.561 Validating Application Configuration
2020-05-26 15:34:47.575 Load APP Configuration
2020-05-26 15:34:47.598 COM:0
2020-05-26 15:34:47.598 PBLDOWNLOADPROTOCOL:0
2020-05-26 15:34:47.598 PROGRAMMER:True
2020-05-26 15:34:47.598 PROGRAMMER:H:\QFIL\NB1-0-484A-prog_ufs_firehose_8998_ddr.elf
2020-05-26 15:34:47.598 RESETSAHARASTATEMACHINE:False
2020-05-26 15:34:47.598 SAHARAREADSERIALNO:False
2020-05-26 15:34:47.598 SEARCHPATH:H:\QFIL
2020-05-26 15:34:47.598 RAWPROGRAM:
2020-05-26 15:34:47.598 NB1-0-484A-rawprogram0.xml
2020-05-26 15:34:47.598 PATCH:
2020-05-26 15:34:47.598 NB1-0-484A-patch0.xml
2020-05-26 15:34:47.598 ACKRAWDATAEVERYNUMPACKETS:False
2020-05-26 15:34:47.598 ACKRAWDATAEVERYNUMPACKETS:100
2020-05-26 15:34:47.598 MAXPAYLOADSIZETOTARGETINBYTES:False
2020-05-26 15:34:47.598 MAXPAYLOADSIZETOTARGETINBYTES:49152
2020-05-26 15:34:47.598 DEVICETYPE:ufs
2020-05-26 15:34:47.598 PLATFORM:8x26
2020-05-26 15:34:47.598 VALIDATIONMODE:0
2020-05-26 15:34:47.598 RESETAFTERDOWNLOAD:True
2020-05-26 15:34:47.598 MAXDIGESTTABLESIZE:8192
2020-05-26 15:34:47.598 SWITCHTOFIREHOSETIMEOUT:30
2020-05-26 15:34:47.598 RESETTIMEOUT:200
2020-05-26 15:34:47.599 RESETDELAYTIME:2
2020-05-26 15:34:47.599 METABUILD:
2020-05-26 15:34:47.599 METABUILD:
2020-05-26 15:34:47.599 FLATBUILDPATH:C:\
2020-05-26 15:34:47.599 FLATBUILDFORCEOVERRIDE:True
2020-05-26 15:34:47.599 QCNPATH:C:\Temp\00000000.qcn
2020-05-26 15:34:47.599 QCNAUTOBACKUPRESTORE:False
2020-05-26 15:34:47.599 SPCCODE:000000
2020-05-26 15:34:47.599 ENABLEMULTISIM:False
2020-05-26 15:34:47.599 AUTOPRESERVEPARTITIONS:False
2020-05-26 15:34:47.599 PARTITIONPRESERVEMODE:0
2020-05-26 15:34:47.599 PRESERVEDPARTITIONS:0
2020-05-26 15:34:47.599 PRESERVEDPARTITIONS:
2020-05-26 15:34:47.599 ERASEALL:False
2020-05-26 15:34:47.599 PROVISIONPROGRAMMERPATH:H:\QFIL\NB1-0-484A-prog_ufs_firehose_8998_ddr.elf
2020-05-26 15:34:47.599 PROVISIONXMLPATH:H:\QFIL\NB1-0-484A-provision_fih.xml
2020-05-26 15:34:47.600 Load ARG Configuration
2020-05-26 15:34:47.689 Validating Download Configuration
2020-05-26 15:34:47.691 Image Search Path: H:\QFIL
2020-05-26 15:34:47.693 RAWPROGRAM file path: H:\QFIL\NB1-0-484A-rawprogram0.xml
2020-05-26 15:34:47.693 PATCH file path:H:\QFIL\NB1-0-484A-patch0.xml
2020-05-26 15:34:47.693 Programmer Path:H:\QFIL\NB1-0-484A-prog_ufs_firehose_8998_ddr.elf
2020-05-26 15:34:48.565 Process Index:0
2020-05-26 15:34:48.580 Qualcomm Flash Image Loader (QFIL) 2.0.2.3
2020-05-26 15:35:14.146 Start Provision
2020-05-26 15:35:14.231 Program Path:H:\NB1-488B-0-00WW-B04.nb0_unpacked\NB1-0-488B-prog_ufs_firehose_8998_ddr.elf
2020-05-26 15:35:14.275 ***** Working Folder:C:\Users\b3hr4d\AppData\Roaming\Qualcomm\QFIL\COMPORT_4
2020-05-26 15:35:14.625 Binary build date: Apr 27 2018 @ 03:04:33
2020-05-26 15:35:14.626 QSAHARASERVER CALLED LIKE THIS: 'C:\Users\b3hr4d\Desktop\Qualcomm_Flash_Image_Loader_v2.0.2.3\QSaharaServer.ex'Current working dir: C:\Users\b3hr4d\AppData\Roaming\Qualcomm\QFIL\COMPORT_4
2020-05-26 15:35:14.627 Sahara mappings:
2020-05-26 15:35:14.628 2: amss.mbn
2020-05-26 15:35:14.629 6: apps.mbn
2020-05-26 15:35:14.629 8: dsp1.mbn
2020-05-26 15:35:14.630 10: dbl.mbn
2020-05-26 15:35:14.631 11: osbl.mbn
2020-05-26 15:35:14.631 12: dsp2.mbn
2020-05-26 15:35:14.632 16: efs1.mbn
2020-05-26 15:35:14.633 17: efs2.mbn
2020-05-26 15:35:14.633 20: efs3.mbn
2020-05-26 15:35:14.634 21: sbl1.mbn
2020-05-26 15:35:14.634 22: sbl2.mbn
2020-05-26 15:35:14.635 23: rpm.mbn
2020-05-26 15:35:14.635 25: tz.mbn
2020-05-26 15:35:14.636 28: dsp3.mbn
2020-05-26 15:35:14.637 29: acdb.mbn
2020-05-26 15:35:14.637 30: wdt.mbn
2020-05-26 15:35:14.638 31: mba.mbn
2020-05-26 15:35:14.639 13: H:\NB1-488B-0-00WW-B04.nb0_unpacked\NB1-0-488B-prog_ufs_firehose_8998_ddr.elf
2020-05-26 15:35:14.639
2020-05-26 15:35:14.640 15:35:14: Requested ID 13, file: "H:\NB1-488B-0-00WW-B04.nb0_unpacked\NB1-0-488B-prog_ufs_firehose_8998_ddr.elf"
2020-05-26 15:35:14.641
2020-05-26 15:35:14.641 15:35:14: 592464 bytes transferred in 0.172000 seconds (3.2850MBps)
2020-05-26 15:35:14.642
2020-05-26 15:35:14.643
2020-05-26 15:35:14.643
2020-05-26 15:35:14.644 15:35:14: File transferred successfully
2020-05-26 15:35:14.645
2020-05-26 15:35:14.646
2020-05-26 15:35:14.646
2020-05-26 15:35:14.647 15:35:14: Sahara protocol completed
2020-05-26 15:35:14.648 Sending Programmer Finished
2020-05-26 15:35:14.649 Switch To FireHose
2020-05-26 15:35:14.649 Wait for 3 seconds...
2020-05-26 15:35:17.653 Max Payload Size to Target:49152 Bytes
2020-05-26 15:35:17.654 Device Type:ufs
2020-05-26 15:35:17.655 Platform:8x26
2020-05-26 15:35:17.657 Disable Ack Raw Data Every N Packets
2020-05-26 15:35:17.659 Skip Write:False
2020-05-26 15:35:17.661 Always Validate:False
2020-05-26 15:35:17.663 Use Verbose:False
2020-05-26 15:35:17.693 ***** Working Folder:C:\Users\b3hr4d\AppData\Roaming\Qualcomm\QFIL\COMPORT_4
2020-05-26 15:35:17.723 Provision Fail:FireHose Fail:FHLoader Fail:The system cannot find the file specified
2020-05-26 15:35:17.725 Finish Provision
2020-05-26 15:35:17.725 You may need to physically reset the phone manually
Click to expand...
Click to collapse
Hi
I've got the same issue with my Nokia 8 ta1004. Just wondering if you have solved the problem. Sharing information would be greatly appreciated.
Thanks,
Comrades, I ask for help in this difficult matter. We have a Nokia 4.2 device on hand. I did not find anything in the topic for 4.2, I say right away. I dug up the Lineage OS firmware with xda, the bottom line is that I unlocked the bootloader, rolled up the twrp and in the end something went wrong and I have a hard brick that does not react to anything. What I tried to do: I tried to sew in QFIL / QPST (different combinations of buttons and battery cable did not change anything), the body can be seen in 9008. As a result, I had an error in the rawprogramm0 file, and in QFILL various kinds of Unable to read packet header. As a result, I still have a 9008 brick. I searched for testpoints, but nothing changed as a result. I tried to read forums, but there are no cases specifically for this device.
Error with the latest version of QFIL #
Spoiler: Error log
Code:
2021-10-03 22:05:31.203 ***** Working Folder:C:\Users\Admin\AppData\Roaming\Qualcomm\QFIL\BHI
2021-10-03 22:05:31.211 Validating Application Configuration
2021-10-03 22:05:31.218 Load APP Configuration
2021-10-03 22:05:31.240 COM:4
2021-10-03 22:05:31.240 PBLDOWNLOADPROTOCOL:0
2021-10-03 22:05:31.240 PROGRAMMER:True
2021-10-03 22:05:31.240 PROGRAMMER:H:\[azROM.net]_HCTSW_PAN-136C-0-00WW-B01_XML\HCTSW_PAN-136C-0-00WW-B01_user-images\prog_emmc_firehose_8937_ddr.mbn
2021-10-03 22:05:31.240 RESETSAHARASTATEMACHINE:False
2021-10-03 22:05:31.240 SAHARAREADSERIALNO:False
2021-10-03 22:05:31.240 SEARCHPATH:H:\[azROM.net]_HCTSW_PAN-136C-0-00WW-B01_XML\HCTSW_PAN-136C-0-00WW-B01_user-images
2021-10-03 22:05:31.240 RAWPROGRAM:
2021-10-03 22:05:31.240 rawprogram0.xml
2021-10-03 22:05:31.240 PATCH:
2021-10-03 22:05:31.240 patch0.xml
2021-10-03 22:05:31.240 ACKRAWDATAEVERYNUMPACKETS:False
2021-10-03 22:05:31.240 ACKRAWDATAEVERYNUMPACKETS:100
2021-10-03 22:05:31.240 MAXPAYLOADSIZETOTARGETINBYTES:False
2021-10-03 22:05:31.240 MAXPAYLOADSIZETOTARGETINBYTES:49152
2021-10-03 22:05:31.240 ACTIVEBOOTPARTITION:False
2021-10-03 22:05:31.240 ACTIVEBOOTPARTITION:0
2021-10-03 22:05:31.240 PHYPARTITIONS:False
2021-10-03 22:05:31.240 PHYPARTITIONS:0
2021-10-03 22:05:31.240 DEVICETYPE:emmc
2021-10-03 22:05:31.240 PLATFORM:8x26
2021-10-03 22:05:31.240 VALIDATIONMODE:0
2021-10-03 22:05:31.240 RESETAFTERDOWNLOAD:False
2021-10-03 22:05:31.240 SWITCHTOFIREHOSETIMEOUT:30
2021-10-03 22:05:31.240 RESETTIMEOUT:200
2021-10-03 22:05:31.240 RESETDELAYTIME:2
2021-10-03 22:05:31.240 METABUILD:
2021-10-03 22:05:31.240 METABUILD:
2021-10-03 22:05:31.241 FLATBUILDPATH:C:\
2021-10-03 22:05:31.241 FLATBUILDFORCEOVERRIDE:True
2021-10-03 22:05:31.241 QCNPATH:C:\Temp\00000000.qcn
2021-10-03 22:05:31.241 QCNAUTOBACKUPRESTORE:False
2021-10-03 22:05:31.241 SPCCODE:000000
2021-10-03 22:05:31.241 ENABLEMULTISIM:False
2021-10-03 22:05:31.241 AUTOPRESERVEPARTITIONS:False
2021-10-03 22:05:31.241 PARTITIONPRESERVEMODE:0
2021-10-03 22:05:31.241 PRESERVEDPARTITIONS:0
2021-10-03 22:05:31.241 PRESERVEDPARTITIONS:
2021-10-03 22:05:31.241 ERASEALL:False
2021-10-03 22:05:31.241 Load ARG Configuration
2021-10-03 22:05:31.298 Validating Download Configuration
2021-10-03 22:05:31.299 Image Search Path: H:\[azROM.net]_HCTSW_PAN-136C-0-00WW-B01_XML\HCTSW_PAN-136C-0-00WW-B01_user-images
2021-10-03 22:05:31.301 RAWPROGRAM file path: H:\[azROM.net]_HCTSW_PAN-136C-0-00WW-B01_XML\HCTSW_PAN-136C-0-00WW-B01_user-images\rawprogram0.xml
2021-10-03 22:05:31.301 PATCH file path:H:\[azROM.net]_HCTSW_PAN-136C-0-00WW-B01_XML\HCTSW_PAN-136C-0-00WW-B01_user-images\patch0.xml
2021-10-03 22:05:31.302 Programmer Path:H:\[azROM.net]_HCTSW_PAN-136C-0-00WW-B01_XML\HCTSW_PAN-136C-0-00WW-B01_user-images\prog_emmc_firehose_8937_ddr.mbn
2021-10-03 22:05:32.203 Process Index:0
2021-10-03 22:05:32.224 Qualcomm Flash Image Loader (QFIL) 2.0.3.5
2021-10-03 22:05:36.202 Start Download
2021-10-03 22:05:36.207 Program Path:H:\[azROM.net]_HCTSW_PAN-136C-0-00WW-B01_XML\HCTSW_PAN-136C-0-00WW-B01_user-images\prog_emmc_firehose_8937_ddr.mbn
2021-10-03 22:05:36.209 ***** Working Folder:C:\Users\Admin\AppData\Roaming\Qualcomm\QFIL\COMPORT_4
2021-10-03 22:10:06.078 Binary build date: Jun 25 2019 @ 03:16:15
2021-10-03 22:10:06.081 QSAHARASERVER CALLED LIKE THIS: 'C:\Program Files (x86)\Qualcomm\QPST\bin\QSaharaServer.ex'Current working dir: C:\Users\Admin\AppData\Roaming\Qualcomm\QFIL\COMPORT_4
2021-10-03 22:10:06.082 Sahara mappings:
2021-10-03 22:10:06.083 2: amss.mbn
2021-10-03 22:10:06.084 6: apps.mbn
2021-10-03 22:10:06.085 8: dsp1.mbn
2021-10-03 22:10:06.086 10: dbl.mbn
2021-10-03 22:10:06.086 11: osbl.mbn
2021-10-03 22:10:06.087 12: dsp2.mbn
2021-10-03 22:10:06.088 16: efs1.mbn
2021-10-03 22:10:06.089 17: efs2.mbn
2021-10-03 22:10:06.089 20: efs3.mbn
2021-10-03 22:10:06.090 21: sbl1.mbn
2021-10-03 22:10:06.091 22: sbl2.mbn
2021-10-03 22:10:06.092 23: rpm.mbn
2021-10-03 22:10:06.093 25: tz.mbn
2021-10-03 22:10:06.093 28: dsp3.mbn
2021-10-03 22:10:06.094 29: acdb.mbn
2021-10-03 22:10:06.095 30: wdt.mbn
2021-10-03 22:10:06.096 31: mba.mbn
2021-10-03 22:10:06.102 13: H:\[azROM.net]_HCTSW_PAN-136C-0-00WW-B01_XML\HCTSW_PAN-136C-0-00WW-B01_user-images\prog_emmc_firehose_8937_ddr.mbn
2021-10-03 22:10:06.103
2021-10-03 22:10:06.104 22:10:06: ERROR: function: sahara_rx_data:276 Unable to read packet header. Only read 0 bytes.
2021-10-03 22:10:06.105
2021-10-03 22:10:06.106 22:10:06: ERROR: function: sahara_main:982 Sahara protocol error
2021-10-03 22:10:06.107
2021-10-03 22:10:06.108 22:10:06: ERROR: function: main:320 Uploading Image using Sahara protocol failed
2021-10-03 22:10:06.108
2021-10-03 22:10:06.109
2021-10-03 22:10:06.110 Download Fail:Sahara Fail:QSaharaServer Fail:Process fail
2021-10-03 22:10:06.111 Finish Download
QPST when loading rawprogram0 in Load XML def:
Code:
Document error on element type "raw program" and name / value "true"