Hello, as I wrote in the title, with any of the custom recovery I cannot use the touchscreen.
Before unlocking I installed the latest update ( 12.0.12 Stable )
Ich habe genau das gleich Problem, in Orange und PBRP habe ich kein Touch. Im PBRP funktioniert es mit einer Maus. Das normale TWRP startet überhaupt nicht und bleibt schwarz.
I have exactly the same problem, in Orange and PBRP I have no touch. In PBRP it works with a mouse. The normal TWRP does not start at all and stays black.
Related
I found a T-Mobile.de ROM and it works OK for me but it doesn´t configure for Network Access...So I cant use GPRS/EDGE/HSDPA.
I remember that I saw a .cab or something which initiate this automatic Operator Config which happens after flashing on all other ROM´s.
Unfortunately I can´t find it anymore
Can anyone help here?
Das Deutsche T-Mobile Rom hat diese Software sicher nicht dabei...
Da du mit Englisch scheinbar keine Probleme hast empfehle ich dir aktuell das Duttys Rom 6.1 dort Funktioniert die Automatische Einstellung auf den Provider sehr gut! Das ganze Gerät ist wesendlich schneller hat fast alle Tools vorinstalliert und auch der Cube ist Spitze...
http://forum.xda-developers.com/showthread.php?t=379327
A bit late... but I just extracted my old t-mobile AT rom.
I guess this is the cab you were looking for.
So if you or anybody else is still looking for this cab: here you go...
View attachment TMAT_Conn.CAB
Hallo zusammen,
ich hoffe man möge mir verzeihen das ich in diesem Forum in Deutsch schreibe,mein Englisch ist mehr als Schlecht, also noch mal sorry.
ich habe seit gestern einen MDa Vario 3,habe diesen mit dem Kaiser unlocker vom Netlock befreit,leider habe ich seit dem keinen Sound mehr,weder normale noch wenn ich telefonieren will,dann höre ich einfach garnichts.Kann mir jemand Helfen??Ich bin in sachen MDA ein absoluter Newbie und fände es toll wenn mir einer leicht verständlich erklären könnte was ich tun kann.
Ich danke euch schon mal für euer verständnis und eure Hilfe
did you reflash the original radio back to the Vario??
Hallo,
wie kann ich das machen?Könnte mir jemand das orginal radio zukommen lassen und wie sagen wie ich vorgehen muss(sollte)
thx
can't help u if u don't use english ...
Habe das mal mit Google übersetzt:
Hello,
I hope you forgive me should I in this forum write in German, my English is more than bad, so sorry again.
I have since yesterday a MDa Vario 3, had it with the Kasier unlocker, Netlock free, unfortunately, I have since not sound more, neither normal nor if I make a call, then I just hear nothing.can someone help me? I'm MDA matters in an absolute newbie and think it would be great if I declare an easily understandable what I could do.
I thank you, even your understanding and for your help
did u flash a rom to ur device or radio?
if so which one? i need to know both rom and radio before i can tell u what to do. does sound like a radio prob though
Hello,
I do not know exactly what the tool has made, it was like the Kaiser said unlocker I used
did u remember to flash back your original radio? if not than you need to do that. After running Kaiser unlocker you need to re-flash your radio. You can download the radio from xda by searching for it.
Hello,
the problem is, I do not know what my original radio, can you help me?
download both files from my ftp (link below) to one folder and run customruu.exe... It will flash the 1.64.08.21 radio and you should be fine.
ftp://xda:[email protected]
alright go to the settings menu. click on system and frm their click on device information. now write down name/version of rom and also which version of windows mobile does it say u have? wm6 or wm6.1?
Hello,
thank you, I will test and feedback
thesire said:
wm6 or wm6.1?
Click to expand...
Click to collapse
Ooops you r so right, I forgot about it cuz am soo used to 6.1 allready
Hello,
have the flash, still no sound. the data from my MDA Vario 3, after flash:
WM 6 Pro
Rom Version: 1.56.111.4
Rom Date : 8/28/07
Radio: 1.64.08.21
Protokol ver. 25.74.40.02H
Ich nehm mal an du hast des HardSPL draufgespielt, also den bootloader (such mal im rom forum danach HARDSPL heisst des). Am besten rat ich dir, du flasht danach einfach das NOTHRILL v3 GERMAN rom. Das ist WM6.1 incl Radio, ohne den ganzen Tmobile schmarrn drauf. Danach hast du praktisch ein HTC Geraet, welches neuere software drauf hat, und den ganzen tmobile schmarrn nichtmehr drauf hat. Ich hab des bei mir drauf, und es funktioniert wunderbar.
Wenn du das nicht willst, dann such nach einem WM6.0 radio, des sind die mit 1.2X.XX. Rat ich aber davon ab...
Engl:
I assume you installed Hardspl, the bootloader (if not search in the rom forums). I suggest you flash the nothrill v3 german rom. Thats WM6.1 including an appropriate Radio, without all the tmobile mess on it. Then you basically have a stock HTC device, with newer software, and without the tmobile stuff. I installed it on my device and it works perfectly.
if you do not want to do that, search for a WM6.0 radio, thats the ones starting with 1.2X.XX. I dont suggest that (just update the rom).
okay u need to click here:
http://forum.xda-developers.com/showthread.php?t=349375
and download a 1.27.xx.xx radio and flash that
I am sorry, my mistake. You still have your original ROM (WM 6.0) on the Vario. Try to flash the underneath Radio which is for WM 6.0 (the one before is for WM 6.1. Sorry once more
ftp://xda:[email protected]/Uploads/Kaiser/Radio/KAIS_Radio_Only_1.27.12.32_CustomRUU.rar
Hello,
yes that it. many, many thanks for the great Help.I love this forum!
Is there really a free multi Messenger for WM6?
Yes you can find it here
or here
;-)
Good luck and happy to hear your Kaiser is working.
Last week I flashed andorid on my xperia x1i but it has to much bugs
Because of that I wanted "flashback" the Windows mobile ROM on the xperia but I have some problems
First of all i saved the LK Bootload 13.11.11, the KOVSIMG.NBH and this ROM: Xperia X1 R3AA007 in my Micro SD Card. I started the my handy and the screen was white and there were standing ,,loading,, (in blue colour) I wated for hours x/ but it allways keeps screaming ,,loading,, Then i started the handy in boot-mode but the white screen appears again -.-
I desided to eject the SD Card > restart my handy > and started the boot-mode
then i tried to do a task29 but everytime it fails >error 262<
I have read somewherer that I have to do a HSPL but the same error appears -.- Please help me to flash windows mobile on my x1i cause nothing works even the Android i flashed last week no longer works
rachad10 said:
Last week I flashed andorid on my xperia x1i but it has to much bugs
Because of that I wanted "flashback" the Windows mobile ROM on the xperia but I have some problems
First of all i saved the LK Bootload 13.11.11, the KOVSIMG.NBH and this ROM: Xperia X1 R3AA007 in my Micro SD Card. I started the my handy and the screen was white and there were standing ,,loading,, (in blue colour) I wated for hours x/ but it allways keeps screaming ,,loading,, Then i started the handy in boot-mode but the white screen appears again -.-
I desided to eject the SD Card > restart my handy > and started the boot-mode
then i tried to do a task29 but everytime it fails >error 262<
I have read somewherer that I have to do a HSPL but the same error appears -.- Please help me to flash windows mobile on my x1i cause nothing works even the Android i flashed last week no longer works
Click to expand...
Click to collapse
here's how to flash back to winmo
Du verstehst Deutsch ??
Auf der Seite steht dass ich HSPL machen muss aber das geht nicht x) Immer Error 262
rachad10 said:
Du verstehst Deutsch ??
Auf der Seite steht dass ich HSPL machen muss aber das geht nicht x) Immer Error 262
Click to expand...
Click to collapse
Yes, but when already have installed the Android ROM you allready have HardSPL or have you made a SoftSPL?
The forum language is english, so you can write it in english and german, maybe other people have the same problem.
___
Ja, aber wenn du das Android ROM schon geflasht hast musst du ja vorher schon HardSPL gemacht haben, wenn du SoftSPL gemacht hast müsstest du das halt wiederholen, weils nach dem flashen nicht mehr vorhanden ist.
Schreibe das nächste mal in beiden Sprachen für andere oder schreibe eine PM soll ja auch für andere User nützlich sein.
neoofoox said:
Yes, but when already have installed the Android ROM you allready have HardSPL or have you made a SoftSPL?
The forum language is english, so you can write it in english and german, maybe other people have the same problem.
___
Ja, aber wenn du das Android ROM schon geflasht hast musst du ja vorher schon HardSPL gemacht haben, wenn du SoftSPL gemacht hast müsstest du das halt wiederholen, weils nach dem flashen nicht mehr vorhanden ist.
Schreibe das nächste mal in beiden Sprachen für andere oder schreibe eine PM soll ja auch für andere User nützlich sein.
Click to expand...
Click to collapse
I've already made a HSPL (not a SoftSPL) there is standing in the boot-mode that I have SPL-0.72.0000
Now I want to delete Andoriod comple, I tried to do a Task29 but everytime >error262<
_____________________
Ich habe schon einen HSPL gemacht !! (WO ich Android geflasht habe). Im Boot-Mode steht dass ich SPL-0.72.0000 habe.
Ich will Andoid jetzt komplett löschen um Windows MObile zu flashen, Ich versuchte es mit Task 29 aber ich erhalte immer einen >error262<
No one there who can help ?? :S
Kinda strange when old x1-threads pop up... ^^
Listen, "SPL 0.72.0000" means you have stock-spl. Hard-spl is "0.72.Olinex". That's why it doesn't work.
Ohhh :O
First, thanks for your answer
What do I have to do now ? I tried to do a Hard-spl but it fails everytime whit error 262
You have to flash it via usb-method, sd-method only works if you already have hardspl. (0.72 -> 0.78)
For that to work you need your PC recognize the x1 in bootloader-mode (drivers).
Do I need the SD Card in my x1 ? Or do I have to get it out ?
#Edit: There is no SD Card in my x1. I started KovskyAdvancedRUU > pressed Regular RUU (Task 28) - (for flashing NBH files)
then it started flashing and then at 10% it stoped → Error 262 :/
Task 29 had the same error but it stopped at 0% :S
#Edit: After the 3th try, it was succesful
Thanks for helping me
Why should that matter???
Just make sure you have no "kovsimg.nbh" on your sd if it's in. sd always comes before USB in bootloader.
i have the same probleme but when i started KovskyAdvancedRUU > pressed Regular RUU (Task 28) - (for flashing NBH files)
then it started flashing and then at 0% it stoped → Error 262 :/
Task 29 had the same error but it stopped at 0%
re-copy the rom to ur sd-card which renamed'kovsimg',than just flash it
i try to flash it it with USB but it stck in 0% and with SD card stay in loading my SPL is
KOVS110
SPL-0.78.0000
Microp1-787
Microp2-707
please help me guys pleaaaaaaase
Mein G2 wollte ich als "Spielehandy" fürr meine Frau Nehmen...Nachdem ic ( anscheinend falsche Anleitung ) geflascht hatte lief nixmehr....kein revovery,kein FactoryDas einzige was jeweilh noch zu sehn ist ( je nachdem wo man ist ) ist halt das Motorola Zeichenn oder der berühmte Roboter.......
Who can help??????
Mod edit:
Translation:
My G2 I wanted as a "Games Mobile" for R Take my wife ... After ic (apparently incorrect instructions) had geflascht ran nixmehr .... no revovery no FactoryDas only thing jeweilh to see more (depending on where you are) is halt the Motorola Zeichenn or the famous robot .......
<Moderator Edit>: English translation added to the top.
I bought a used Mi 11 Ultra 12 /512 / with EU Rom.
System recognized new update which I then downloaded.
after the download I'm on a page with a padlock and several buttons.
Don't know how to continue.
Can I still undo the whole thing and keep the old version?
I look forward to any help.
Original:
Habe mir ein gebrauchtes Mi 11 Ultra 12 /512 /mit EU Rom zugelegt.
System erkannte neues Update was ich dann auch heruntergeladen habe.
nach dem Download bin ich auf einer Seite mit einem Vorhängeschloss und mehreren Buttons.
Weiß nicht wie weiter.
Kann ich noch das ganze rückgängig machen und die alte Version beibehalten?
Freue mich auf jede Hilfe.
Please show some picture of what you see on the phone screen, because I don't have any "powers" to help.
I think you may be on the login page before boot where you have to select your WiFi, then add your mi account and password. Google the page and insure there is an image of it in English or your language. I found out by using another phone translating it but can't remember which line is which.
.