{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Google Pixel 3a XL
Code:
- Your warranty is now void.
- You have been warned.
- Use at your own risk.
Introduction:
This is the Official Lineage OS 19.1 thread for the Google Pixel 3a XL.
Downloads:
Please follow the install instructions in your device's Wiki page linked below exactly, and make sure your device's firmware matches the required firmware listed.
bonito - Official builds
bonito - My unofficial with Google Apps/Pixel goodies included. Passes SafetyNet by default. OTA's roll roughly once a month. Support not guaranteed or implied.
If you don't follow these instructions, or use 3rd party add-ons (like Magisk) please don't expect support here.
Known Bugs:
None.
Find any? Report them according to this guide.
Notes:
The only supported GApps package at the moment is MindTheGapps, linked on our Wiki page about gapps.
Firmware is shipped in the ROM package for this device, so no need to worry about updating it on your own!
Kernel Source: https://github.com/LineageOS/android_kernel_google_msm-4.9
Thanks for sharing!!
Thanks!
Awesome!
Got to install today and everything is working very smoother then butter on a bagel! Thanks for all of your hard work!
Was able to install on my Pixel 3a XL successfully! Sadly there was a niche feature that was removed, but i hope as this rom continues to be developed, the feature might be readded. The feature i am referring to is the Now Playing detection, for the ability for the Pixel to hear music that is playing in background and display it on the Always On Display. Other than that, this is a solid rom. I would give it a 9/10 regardless because LineageOS is a good rom nonetheless.
Well I am not having as much luck... I keep getting errors
Android system intelligence keeps stopping
This is with the UNOFFICIAL buld from the 21st
Also there does not appear to be any theming colors other then the deafault ones found in stock android. One of the reason I like LOS so much is that gogle does such a horrible job picking allowed theme colors
UPDATE: Loaded the official version and while I dont have the issue with android system intelligence I no longer can find any way to change theme color. In the custom version I had the options to use the standard google colors, in the stock version those choices simply dont exist. I only see wallpaper options and nothing else.
Is it hidden somewhere else under settings as I cant find it
Also changing system icon type doesnt affect all icons, not sure this may be an issue with pure sock as well
adm1jtg said:
Well I am not having as much luck... I keep getting errors
Android system intelligence keeps stopping
This is with the UNOFFICIAL buld from the 21st
Also there does not appear to be any theming colors other then the deafault ones found in stock android. One of the reason I like LOS so much is that gogle does such a horrible job picking allowed theme colors
UPDATE: Loaded the official version and while I dont have the issue with android system intelligence I no longer can find any way to change theme color. In the custom version I had the options to use the standard google colors, in the stock version those choices simply dont exist. I only see wallpaper options and nothing else.
Is it hidden somewhere else under settings as I cant find it
Also changing system icon type doesnt affect all icons, not sure this may be an issue with pure sock as well
Click to expand...
Click to collapse
intelligence error will be fixed next build.
As for official not having color selection - yeah, that's a pixel goodies thing.
npjohnson said:
intelligence error will be fixed next build.
As for official not having color selection - yeah, that's a pixel goodies thing.
Click to expand...
Click to collapse
Is the theming/pixel goodies slated to come to the stock build anytime soon? If not could I load the unofficial on top of the official build I have now WTHOUT having to wipe data.?
adm1jtg said:
Is the theming/pixel goodies slated to come to the stock build anytime soon? If not could I load the unofficial on top of the official build I have now WTHOUT having to wipe data.?
Click to expand...
Click to collapse
No, and maybe.
ok so whats the official party line from LOS for theming as currently there is no way to change accent colors at all. Mine defaults to lime green and I can find no way to change it
That said I dont want to seem negative as for a first build for android 12 everything else seems to work perfectly
adm1jtg said:
ok so whats the official party line from LOS for theming as currently there is no way to change accent colors at all. Mine defaults to lime green and I can find no way to change it
That said I dont want to seem negative as for a first build for android 12 everything else seems to work perfectly
Click to expand...
Click to collapse
On the official build there is no way.
It's monet. Matches AOSP.
With much thanks & appreciation for LOS support for our beloved devices over the years, going back to the early Moto & Nexus days ... here I come, joining soon - my Pixel 3a XL in excellent condition, well cared for and AccuBattery health put it at 97% still, SOT on stock rom of close to 8 hours - not putting this away anytime soon, nor going to trade it for $25 or even $50 (BL unlocked, ready to have fun)
Really sorry for this question
I have mido and it's quite simple to flash roms via usb in twrp or of...... instructions are...
Wiping
Dalvik/art cache
Cache
System
Data
Interal storage
Vendor
After all this
Data wipe with yes option
Installation
Rom.zip
Gapps.zip
Magisk.zip
Reboot
But here in bonito download section it has rom.zip + recovery.zip?
My question is am I able flash the rom via usb?
Please guide me
npjohnson said:
On the official build there is no way.
It's monet. Matches AOSP.
Click to expand...
Click to collapse
Guess I will just watch the thread till you release your fixed build
UPDATE: forgot stock android theming is horrible. Only 4 colors to pick. Will keep using official with the magisk module for now... and yes I know this makes me unsupported since am using magisk but until LOS implements some kind of theming its really the only choice
Quick Pull down Tile-Accent Colors Android 12
If you don't care for Android 12 stock colors, you can change the pastel QS Pulldown Tile colors to more basic colors. I've added two more options. After flashing these, you have all color options to pick from in settings/Display/Device Theme...
forum.xda-developers.com
jesudas said:
Really sorry for this question
I have mido and it's quite simple to flash roms via usb in twrp or of...... instructions are...
Wiping
Dalvik/art cache
Cache
System
Data
Interal storage
Vendor
After all this
Data wipe with yes option
Installation
Rom.zip
Gapps.zip
Magisk.zip
Reboot
But here in bonito download section it has rom.zip + recovery.zip?
My question is am I able flash the rom via usb?
Please guide me
Click to expand...
Click to collapse
Read this: https://wiki.lineageos.org/devices/bonito/install
Instructions are clear as they can be.
jesudas said:
Really sorry for this question
I have mido and it's quite simple to flash roms via usb in twrp or of...... instructions are...
Wiping
Dalvik/art cache
Cache
System
Data
Interal storage
Vendor
After all this
Data wipe with yes option
Installation
Rom.zip
Gapps.zip
Magisk.zip
Reboot
But here in bonito download section it has rom.zip + recovery.zip?
My question is am I able flash the rom via usb?
Please guide me
Click to expand...
Click to collapse
There is no recovery zip. Not at all sure where you are looking.
Follow the wiki.
what a smooth experience with the official version I did not expect less from LOS
btw, how does the version with the Pixel Features runs?
KarinByChance said:
what a smooth experience with the official version I did not expect less from LOS
btw, how does the version with the Pixel Features runs?
Click to expand...
Click to collapse
About the same
npjohnson said:
No, and maybe.
Click to expand...
Click to collapse
Actually The answers seem to be No and No then. Tried to load yours on top of official and had intelligence errors as well as just general app stoping errors mostly when in settings.
Back on official LOS for now, had to reload with a factory format to get it to work right again. Hope LOS team implements some kind of theming in the near future.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
We’re really excited to announce that we are releasing our Nougat flavour of Paranoid Android. We have a lot in store - with a mix of both features & improvements.
First & foremost, we have moved our code base to be fully CAF based. This brings many improvements to your device. The key improvement here is that Qualcomm hardware is better tuned on the CAF base and with our additional optimisations we can provide a smooth and fluid user experience that will let you enjoy using your device without any lags.
On first launch you’ll notice a clean setup with a beautiful wallpaper from Hampus Olsson who’s teamed up with us again and created several beautiful pieces of artwork. For those of you who don’t know, Hampus is a multi-disciplinary artist whose work stands itself and we’re glad to have him onboard. We have also added several new features and made improvements to the UI of the system that we believe would enhance the overall experience.
Pie
We’ve been working hard on redesigning this key feature of our portfolio and we’re really happy with how it has turned out. The whole design has been reworked and it fits in well with the overall feel of Google’s Material Design. This gives you the opportunity to use more gesture based control for navigating, rather than using the standard Navigation Bar at the bottom of your screen. Expect improvements and additions in the future.
Color Engine
We’re proud to announce our newest feature - Color Engine. Color Engine allows you to seamlessly change the colors of your device to be in Light, Dark (Pixel) and Black modes with a variety of accent colors to choose from. This makes changing the theme of your device really quick without having to install any extra packages on your device.
Major features:
- Reworked Pie
- Color engine
- Immersive mode
- Buttons customization (including navigation bar)
- On the spot controls (OTS)
Minor features:
- SafetyNet Compatibility
- Battery/Notification LED control
- Recent tasks locking
- Battery icon customization
- Google now page in default launcher
- Substratum (OMS) support (Color engine will be deactivated if you use Substratum)
- Quick pulldown
- Various performance and battery improvements
- Display Burn-in protection (for OLED screens)
- More to explore
Device specific features for OP3(T) (List is being updated):
- Oneplus 3(T) custom camera HAL: Resulting in better picture quality than OEM.
- Implemented custom picture background processing leading to very fast shutter speed (OnePlus 3(T) specific)
- Offscreen gestures
- sRGB support (OnePlus 3(T) specific)
- Alert slider customization
- aptX and aptXHD support
- Specific device performance and battery optimizations (details on this coming)
Note: Custom kernels are explicitly unsupported and will cause issues
unless they state that they are AOSPA compatible or AOSPA based!
Download
Get our latest Pixel build here.
Changelogs
As we're getting back into the thread game, keeping up with threads and updating them as per changelogs can be too hectic given our schedule. However, very detailed changelogs always go up on our Google+ page, follow us for constant updates!
Instructions & requirements
* Wipe system, data and cache
* Flash Rom plus the twrp zip
* reboot again to recovery
* flash Gapps and twrp zip
Dirty flash
* flash Rom plus the twrp zip
* reboot again to twrp
* flash Gapps and twrp zip
Important / Useful links
OpenGapps
SuperSU root package
Paranoid Android Community (G+)
Our kernel sauce (Pixel (XL))
Bug reports on Google Sheets
As always, we listen to what you have to say. Help us make PA better by submitting good bug reports possibly with a log attached. Learn how to take logs here. Submit bug reports and we'll try to iron out issues as soon as possible - it really helps a lot.
Our device maintainers and CAF caretakers @TheCrazyLex, @xboxfanj, @arter97, @ChrisLahaye @Thecrazyskull are right here at xda. Mention (@) them if you need some assistance and/or when reporting bugs.
Cheers and #StayParanoid!
XDA:DevDB Information
Paranoid Android, ROM for the Google Pixel
Contributors
freak_97, thecrazylex, Thecrazyskull
Source Code: [url]https://github.com/AOSPA[/URL]
ROM OS Version: 7.x Nougat
Version Information
Status: Stable
Current Stable Version: 7.2.1
Stable Release Date: 2017-07-20
Created 2017-06-02
Last Updated 2017-07-20
Does cloud backup from Google drive work?
rohitece06 said:
Does cloud backup from Google drive work?
Click to expand...
Click to collapse
Yes it does
Sent from my Google Pixel using XDA Labs
---------- Post added at 10:01 AM ---------- Previous post was at 10:00 AM ----------
My first cycle got me 4h sot and 27h standby with 23% left, awesome work guys! Loving the fluidity, can't wait for what's next to come!
Sent from my Google Pixel using XDA Labs
After full wipe I flashed this rom, once booted color engine is disabled because "substratrum is being used" (or something similar), but I don't have substratum installed now..
Hello
Did anyone tried with the April bootloader?It works with the old flash method?
I'm asking because i don't have wifi around.
micr0g said:
Hello
Did anyone tried with the April bootloader?It works with the old flash method?
I'm asking because i don't have wifi around.
Click to expand...
Click to collapse
I flashed it with the April bootloader with no issues in terms of loading it. The one problem I had was that Google Camera would crash on loading, but that may have been a gapps issue since it's the first time I actually used opengapps for the pixel.
Has anyone used arters TWRP to flash? Any issues?
ragzz03 said:
Has anyone used arters TWRP to flash? Any issues?
Click to expand...
Click to collapse
What's that? Link? I just used RC2 from the TWRP website with no problems.
uodii said:
What's that? Link? I just used RC2 from the TWRP website with no problems.
Click to expand...
Click to collapse
Went by what the instructions are linking in the OP. Takes you to the OP3T forum using arters TWRP. The file name is for the OP3T so I was a little hesitant to use it. It is a little confusing, no?
For me the adb sideload stops at 35% completion and the ROM doesn't install.
April bootloader with TWRP RC2 installed. Same error with booted TWRP RC1
ragzz03 said:
Went by what the instructions are linking in the OP. Takes you to the OP3T forum using arters TWRP. The file name is for the OP3T so I was a little hesitant to use it. It is a little confusing, no?
Click to expand...
Click to collapse
Taking this shortcut by pointing to installation instructions of an unrelated device is a sure path to bricks! Arters build of TWRP is to enable F2FS filesystem for OnePlus 3/3T devices and *not* for Pixel devices.
I am on latest stock (may security patch), with conflicting reports using twrp rc2, I am staying away from custom ROMs till I see a clear set of instructions or till I read enough to figure that out.
hackworks said:
Taking this shortcut by pointing to installation instructions of an unrelated device is a sure path to bricks! Arters build of TWRP is to enable F2FS filesystem for OnePlus 3/3T devices and *not* for Pixel devices.
I am on latest stock (may security patch), with conflicting reports using twrp rc2, I am staying away from custom ROMs till I see a clear set of instructions or till I read enough to figure that out.
Click to expand...
Click to collapse
That is kinda of what i was worried about.
I used RC2 flashed PA and ARM64 mini OPEN GAPPS and ROM runs great so far.
Wiped everything except internal storage.
Flashed PA.
Flashed Gapps (first time was a bad download, redownloaded and worked fine).
Flashed TWRP.
Booted rom.
reboots into TWRP fine everytime.
seems to work great, no FC other than the setting app that always closes.:good::good:
Hi guys I don't think arters TWRP is to be used... It's strictly for the OP3T
Sent from my Google Pixel using XDA Labs
ragzz03 said:
That is kinda of what i was worried about.
I used RC2 flashed PA and ARM64 mini OPEN GAPPS and ROM runs great so far.
Wiped everything except internal storage.
Flashed PA.
Flashed Gapps (first time was a bad download, redownloaded and worked fine).
Flashed TWRP.
Booted rom.
reboots into TWRP fine everytime.
seems to work great, no FC other than the setting app that always closes.:good::good:
Click to expand...
Click to collapse
2 questions to ask....
Does the rom include volume skip for music and do you have to flash vendor img? Thanks
drocny87 said:
2 questions to ask....
Does the rom include volume skip for music and do you have to flash vendor img? Thanks
Click to expand...
Click to collapse
I did not flash a vendor image and I am on the L vendor. Does not say mismatch when boots up.
Yes volume to skip works for me.
stryker09 said:
Yes it does
Sent from my Google Pixel using XDA Labs
---------- Post added at 10:01 AM ---------- Previous post was at 10:00 AM ----------
My first cycle got me 4h sot and 27h standby with 23% left, awesome work guys! Loving the fluidity, can't wait for what's next to come!
Sent from my Google Pixel using XDA Labs
Click to expand...
Click to collapse
Which gapps did you use? I used mini and it did not offer me to backup from cloud. it wanted to backup from another phone.
rohitece06 said:
Which gapps did you use? I used mini and it did not offer me to backup from cloud. it wanted to backup from another phone.
Click to expand...
Click to collapse
I used Beans' gapps... Since it seems more tailored to Pixel devices more than opengapps... Also you need to restore from cloud not setup as new device for it to show up
Sent from my Google Pixel using XDA Labs
How is the camera quality compared to stock? Has PA also the pulldown menu with figerprint like stock?
stryker09 said:
I used Beans' gapps... Since it seems more tailored to Pixel devices more than opengapps... Also you need to restore from cloud not setup as new device for it to show up
Sent from my Google Pixel using XDA Labs
Click to expand...
Click to collapse
Aah, I used OpenGapps. Right on about not setting up as new device.
DanielGiGi said:
How is the camera quality compared to stock? Has PA also the pulldown menu with figerprint like stock?
Click to expand...
Click to collapse
Not sure about the camera quality but it does have the gestures.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Realme 5 Pro [RMX1971]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 10.0
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint reader
NFC
Lights
Sound / vibration
Known issues
Nothing
DON'T FLASH GAPPS, ALREADY INCLUDED
Download from Pixel Experience website
Donate
Liked my work? Give me a beer
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog
Android OS version: 10.0.0_r27
Security patch level: February 2020
Device Source code: https://github.com/bablusss/device_realme_RMX1971
Source code: https://github.com/PixelExperience
Difference between this and the other Pixel Experience?? Is this going official near time soon?
Is this working on Realme Q?
saurav_xdadev said:
Difference between this and the other Pixel Experience?? Is this going official near time soon?
Click to expand...
Click to collapse
Bruh... Just let it go. Official means nothing to us end users. For devs official means they would've to dedicate themselves to that one ROM, become part of the official PE site and dev group and keep it updating even if they don't really want to. I think it means responsibility. So don't keep asking 'official when!?' for a dev is dedicated enough towards one ROM will take on official too. If not they won't.
saurav_xdadev said:
Difference between this and the other Pixel Experience?? Is this going official near time soon?
Click to expand...
Click to collapse
Official doesn't mean it's stable, just a tags bruh, they can update without Official
Hey there. Tested out the other PE version here on XDA, but that bootlooped after 2 weeks of usage (apparently a problem with most custom OSes). Does this fix the bootloop issue? Havoc OS recently pushed a patch that fixes said problem
greenys' said:
Bruh... Just let it go. Official means nothing to us end users. For devs official means they would've to dedicate themselves to that one ROM, become part of the official PE site and dev group and keep it updating even if they don't really want to. I think it means responsibility. So don't keep asking 'official when!?' for a dev is dedicated enough towards one ROM will take on official too. If not they won't.
Click to expand...
Click to collapse
viethoang18 said:
Official doesn't mean it's stable, just a tags bruh, they can update without Official
Click to expand...
Click to collapse
I didn't mean to be rude. Just as to know why there are two threads for the same rom.
I'll be more than happy to have any roms having no bugs at all and be unofficial rather than having bugs and be official. Peace :good:
Nice! tho fingerprint hardware becomes unavailable at times, and TWRP can read the internal memory as it becomes encrypted
saurav_xdadev said:
I didn't mean to be rude. Just as to know why there are two threads for the same rom.
I'll be more than happy to have any roms having no bugs at all and be unofficial rather than having bugs and be official. Peace :good:
Click to expand...
Click to collapse
Sure thing. Me too.
It's good rom. All functions work well for me! But wifi doesn't connect automatically.
bahuy2003 said:
It's good rom. All functions work well for me! But wifi doesn't connect automatically.
Click to expand...
Click to collapse
It will work only if linked to a know location. Kind of trade off.
How do you flash this rom from stock non rooted ColorOS.
JominatorX said:
How do you flash this rom from stock non rooted ColorOS.
Click to expand...
Click to collapse
Yes you can!
1. Unlock bootloader.
2. Flash recovery over fastboot mode.
3. Download rom and copy it into sdcard (not internal memory).
4. Put your device into recovery mode.
5. Flash rom from sdcard
6. Format data (factory reset).
7. Come back fastboot mode and flash vbmeta.img
8. Reboot system.
So that's, you didn't need to root your mobile.
---------- Post added at 04:11 PM ---------- Previous post was at 04:09 PM ----------
clavicle said:
It will work only if linked to a know location. Kind of trade off.
Click to expand...
Click to collapse
Yes, that's right. I think this rom is the best from custom roms.
How does user update OTA with this Custom ROM if the new version is available? Must flash again and cannot do it through the phone directly?
Thanks for your detailed guide! One last request tho where can I find a compatible vbmeta.img that I can flash to avoid recovery destroyed error.
one question: how can I upgrade to this version from the previous PE such like the 17/01/2020 version by @BabluS?
@Orgasmtrron
There is this double tap to wake bug in this rom. No matter how your toggle is selected to in the settings, the Tap to Wake feature is always on. This is leading to battery drain too.
Another, can the wifi fix be incorporated? The wifi will not reconnect after switching it off, even though I have activated the option of wifi scanning and set the location to on. It still wouldn't reconnect automatically. You always have to manually turn the wifi on.
Thanks.
JominatorX said:
Thanks for your detailed guide! One last request tho where can I find a compatible vbmeta.img that I can flash to avoid recovery destroyed error.
Click to expand...
Click to collapse
Vbmeta.img
https://drive.google.com/file/d/1-vk6rZJg-u53jMQZGC_gnb6Rhi5KXNC0/view?usp=drivesdk
my questions to those testers who have tested the current official version(PixelExperience_RMX1971-10.0-20200227-0250-OFFICIAL.zip)
1) anyone tried gcam with all 4 back cameras (including macro and wide cameras) work in this rom ?
2) which version of gcam is stable for this rom?
3) is auto call recording feature available?
So far the rom is so stable, but the ram management is bad, I barely can't open 4 apps together and they load many of the times.
Sent from my Realme 5 Pro using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Google Pixel 3a XL
Code:
- Your warranty is now void.
- You have been warned.
- Use at your own risk.
Introduction:
This is the Official Lineage OS 18.1 thread for the Google Pixel 3a XL.
Downloads:
Please follow the install instructions in your device's Wiki page linked below exactly, and make sure your device's firmware matches the required firmware listed.
bonito
If you don't follow these instructions, or use 3rd party add-ons (like Magisk) please don't expect support here.
Known Bugs:
None.
Find any? Report them according to this guide.
Notes:
The only supported GApps package at the moment is MindTheGapps, linked on our Wiki page about gapps.
Firmware is shipped in the ROM package for this device, so no need to worry about updating it on your own!
Kernel Source: https://github.com/LineageOS/android_kernel_google_msm-4.9
Going to try it now.
Thank you!
npjohnson said:
Firmware is shipped in the ROM package for this device, so no need to worry about updating it on your own!
Click to expand...
Click to collapse
syntax error Are we talking about the Kernel being bundled?
ssurell said:
syntax error Are we talking about the Kernel being bundled?
Click to expand...
Click to collapse
What? No, firmware, like modem, bootloader, etc.
Question:
If you don't follow these instructions, or use 3rd party add-ons (like Magisk) please don't expect support here.
So are you saying if we root there is no support? As most of us coming from stock would at least need root temporarily to restore all our apps.
Can anyone confirm if root even works on this build. I woudnt see any reason not but would like to know cause of the above reason.
UPDATE: Decided to just go for it and everything is working great so far. Took a little work to get google apps working instead of the included aosp ones (phone calendar and contacts) and a bt more work to get it to pass safteynet but its all working 100% now. Also tested this build with both ex kernel and mvk and they both seem to work just fine as well. Will report back if anything changes as have only been running it.a few hours but so far no issues or complaints at all.
Great job LOS team
What is the official way to obtain root access? or is there one any more?
cliffordd said:
What is the official way to obtain root access? or is there one any more?
Click to expand...
Click to collapse
Based on the above statement i quoted sounds like root is not "officially" supported at all. That said to get root i followed the process by which you patch a boot image file with magisk manager. Making it pass safteynet net took additional steps.
If you need more details on either process just post back and i can be more detailed
adm1jtg said:
If you need more details on either process just post back and i can be more detailed
Click to expand...
Click to collapse
Yes please - maybe message me off thread, as this topic might not be appropriate on here.
I have Magisk app installed, due to using Titanium Backup to keep a backup of my app. The upgrade went great and everything is working fine under LOS 18.1. But I miss the ability to take backups and use certain features properly on the device (ie clipboard sharing and other features in KDE Connect, scheduling backups etc) There used to be a package provided by LOS to add or remove su - https://download.lineageos.org/extras but that seems to have stopped now. I was just wondering if there was an "official" way of doing it!
I actually held off upgrading due to the previous download being released on 1st April and not finding some previous April fools pranks to be very funny!!
cliffordd said:
Yes please - maybe message me off thread, as this topic might not be appropriate on here.
I have Magisk app installed, due to using Titanium Backup to keep a backup of my app. The upgrade went great and everything is working fine under LOS 18.1. But I miss the ability to take backups and use certain features properly on the device (ie clipboard sharing and other features in KDE Connect, scheduling backups etc) There used to be a package provided by LOS to add or remove su - https://download.lineageos.org/extras but that seems to have stopped now. I was just wondering if there was an "official" way of doing it!
I actually held off upgrading due to the previous download being released on 1st April and not finding some previous April fools pranks to be very funny!!
Click to expand...
Click to collapse
sent you a private
cliffordd said:
What is the official way to obtain root access? or is there one any more?
Click to expand...
Click to collapse
i flashed the version of Magisk (v21.4) via the LineageOS recovery using the adb sideload and just updated to v22 via the app. I haven't had any issues with root since installing.
First off, I want to say thank you for all the hard work on these builds.
I have came across one issue that isn't working for me, but might not be something everyone else uses a lot. My "squeeze" for Assistant isn't working, but I can change it to take a screenshot of any other option, except the Assistant. Am I doing something wrong or is there another settings need to activate for it to work?
Thanks!
Really want to try this, but can't "fastboot boot twrp.img" or "fastboot flash boot twrp.img" in Android 11 to backup my partitions. What's the point of Android OS if I can't backup my system? I can boot into Lineage OS Recovery, enable adb, figure out the partition names, dd the partitions from shell or pull with adb? But good grief, kinda ridiculous if you ask me.
Haven't been able to use twrp since Android 9 far as i know
lineage-18.1-20210401-nightly-bonito-signed.zip
Searching Settings aborts after a matter of seconds and while typing.
Derelict non-clearable notifications requiring reboot or force close.
Desk Clock stuck at "Loading".
The final LOS 17 seems more polished, but lingering notifications are still present requiring force close.
Nevermind, user error.
ssurell said:
lineage-18.1-20210401-nightly-bonito-signed.zip
Searching Settings aborts after a matter of seconds and while typing.
Derelict non-clearable notifications requiring reboot or force close.
Desk Clock stuck at "Loading".
The final LOS 17 seems more polished, but lingering notifications are still present requiring force close.
Click to expand...
Click to collapse
you're using opengapps - don't do that ;p
Use MindTheGapps, which doesn't break that feature.
npjohnson said:
you're using opengapps - don't do that ;p
Use MindTheGapps, which doesn't break that feature.
Click to expand...
Click to collapse
Actually, it's the first time I've used MindTheGapps. I used OpenGapps after falling back to 17.1 though since it is recommended on the LOS site. I kind of liked the Slim Gapps feel of MTG though, and might try it on 17.1
ssurell said:
Actually, it's the first time I've used MindTheGapps. I used OpenGapps after falling back to 17.1 though since it is recommended on the LOS site. I kind of liked the Slim Gapps feel of MTG though, and might try it on 17.1
Click to expand...
Click to collapse
weird - we don't have MTG builds for 17.1 though, sadly.
How do I disable encrypted device? Tried ElemntalX kernel and Disable_Dm-Verity_ForceEncrypt_quota.zip but phone is still encrypted under security settings after first boot.
When I see "Say Hello To Trust", I just want to punch it in the face. Somebody just needs to build an updated LOS 16 so we have TWRP and possible access to /data (formerly user space) and call it a day.
ssurell said:
How do I disable encrypted device? Tried ElemntalX kernel and Disable_Dm-Verity_ForceEncrypt_quota.zip but phone is still encrypted under security settings after first boot.
When I see "Say Hello To Trust", I just want to punch it in the face. Somebody just needs to build an updated LOS 16 so we have TWRP and possible access to /data (formerly user space) and call it a day.
Click to expand...
Click to collapse
Why do you want encryption disabled?
It's hardware backed, and FBE, so very little gain from running unencrypted...
"Trust" has nothing to do with encryption, it can be on, off, trust just reports it to the user.
Why do you want TWRP? Lineage Recovery does the job just fine. What do you mean "/data (formerly userspace)"? That statement doesn't make much sense.
Regardless of all the above, the disabel force encrypt zip, followed by `fastboot -w` to format userdata ought to do it - but be warned, if you set a PIN, Android (AOSP, not a lineage thing specifically) will re-encrypt you... hence there being no point.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience Plus for Xiaomi Mi 10 Lite 5G [monet]
What is this?
PixelExperience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 11
Whats working?
Wi-Fi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FM radio
Fingerprint reader
Face unlock
NFC
Lights
Sound/vibration
Known issues
Nothing yet
You tell me
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
Download from SourceForge
Donate
Liked my work? Give me a beer
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our Telegram Device Group
Our Telegram Device Release Channel
Our blog
Android OS version: 11.0.0_r43
Security patch level: September 2021
Build author/Device Maintainer: maluueu
Device Tree Source code: https://github.com/maluueu/android_device_xiaomi_monet
Common Tree Source code: https://github.com/maluueu/android_device_xiaomi_sm7250-common
Kernel Source code: https://github.com/maluueu/android_kernel_xiaomi_sm7250
ROM Source code: https://github.com/PixelExperience
ROM Developer: jhenrique09
reserved for future use
So, what's the flashing process for this? Haven't really flashed many ROMs to my Mi 10 Lite and I'm under the impression some things have changed (previous phone was Redmi Note 4X).
Do I:
1. Reboot to Recovery
2. Download the proper ZIP for your device
3. Wipe Data/Cache/System when coming from non-AOSP ROMs
4 Flash the proper firmware
5. Flash the ROM
6. Reboot to System
or is there something else I have to do beforehand?
Necrogenisis said:
So, what's the flashing process for this? Haven't really flashed many ROMs to my Mi 10 Lite and I'm under the impression some things have changed (previous phone was Redmi Note 4X).
Do I:
1. Reboot to Recovery
2. Download the proper ZIP for your device
3. Wipe Data/Cache/System when coming from non-AOSP ROMs
4 Flash the proper firmware
5. Flash the ROM
6. Reboot to System
or is there something else I have to do beforehand?
Click to expand...
Click to collapse
You can find the installation instructions in our Telegram Device Release Channel.
Here's a direct link to the post: here
Adding to that, don't wipe anything else than Data and Cache, the partitions are automagically format or written by need.
When I wipe cache and format data partition I can't transfer rom file to phone using pc and I can't see any files on device using twrp app.. Tried to push file using adb sideload but twrp says encrypted fbe, any ideas?
Never mind, I suceeded
Domac5 said:
When I wipe cache and format data partition I can't transfer rom file to phone using pc and I can't see any files on device using twrp app.. Tried to push file using adb sideload but twrp says encrypted fbe, any ideas?
Never mind, I suceeded
Click to expand...
Click to collapse
Ahh, nice to hear that it's working now.
Nevertheless, if you have any other difficulties, you can also just join our telegram group and ask for help there.
@Domac5 forgot to say, that after you wipe and format your data partition you need to "reboot to recovery" and then the partition will be ready to take your files, for the flashing process.
Thanks for the ROM, will try it asap.
Edit.
Turns out. It has many flaws. The recents are not snappy when they come up, and the there are a few lags when scrolling in the google feed (on the left hand side of the home screen), and in Google Chrome, reading the stories - even after they have loaded up form the network. This is the same for all the AOSP-like ROMs because they are compiled from the same source as far as I see.
The last version works very well, it's nice to have the pixel experience and without glitches.
Infinite thanks to the authors. I look forward to new updates
EDIT: by the way, I miss the gallery application, there is none, just google photos but it is not the same
MetallicGR said:
@Domac5 forgot to say, that after you wipe and format your data partition you need to "reboot to recovery" and then the partition will be ready to take your files, for the flashing process.
Thanks for the ROM, will try it asap.
Edit.
Turns out. It has many flaws. The recents are not snappy when they come up, and the there are a few lags when scrolling in the google feed (on the left hand side of the home screen), and in Google Chrome, reading the stories - even after they have loaded up form the network. This is the same for all the AOSP-like ROMs because they are compiled from the same source as far as I see.
Click to expand...
Click to collapse
I don't have those problems, have you flashed the correct stock rom before?
ccerrato said:
I don't have those problems, have you flashed the correct stock rom before?
Click to expand...
Click to collapse
Yep. Up to the last instruction. Flashed eu firmware, flashed pixel rom, cleared cache, reboot.
I maybe cannot express this enough, but i can tell you how it can be recreated, at least in my end.
Go to settings app, tap on battery, swipe to go to the recent apps. Then, the settings app will not go to the recents and 'join' the others and will stay there.
Moreover I saw that If I leave the app there, it will crash after a while. So far its happening on the Settings app, and on the Play Store as well.
MetallicGR said:
@Domac5 forgot to say, that after you wipe and format your data partition you need to "reboot to recovery" and then the partition will be ready to take your files, for the flashing process.
Thanks for the ROM, will try it asap.
Edit.
Turns out. It has many flaws. The recents are not snappy when they come up, and the there are a few lags when scrolling in the google feed (on the left hand side of the home screen), and in Google Chrome, reading the stories - even after they have loaded up form the network. This is the same for all the AOSP-like ROMs because they are compiled from the same source as far as I see.
Click to expand...
Click to collapse
The recents issue should be resolved already. About the other ones, I can't replicate any of these. If you could send me a video explaining/showing the issues that would be great
ccerrato said:
The last version works very well, it's nice to have the pixel experience and without glitches.
Infinite thanks to the authors. I look forward to new updates
EDIT: by the way, I miss the gallery application, there is none, just google photos but it is not the same
Click to expand...
Click to collapse
Hey ccerrato, first of all, infinite thanks for your donation. I really really appreciate that )
But remember, none of you have to donate anything to me. You can use everything for free (obviously), as I also use this ROM as my daily driver, but if you have some money left over, feel free to do so
Coming back to the gallery "issue", there only is Google Photos on Pixel devices, hence why there is only Google Photos in PixelExperience. But if you don't want to upload your data to Google servers you can just use the app without backup functionality.
MetallicGR said:
Yep. Up to the last instruction. Flashed eu firmware, flashed pixel rom, cleared cache, reboot.
I maybe cannot express this enough, but i can tell you how it can be recreated, at least in my end.
Go to settings app, tap on battery, swipe to go to the recent apps. Then, the settings app will not go to the recents and 'join' the others and will stay there.
Moreover I saw that If I leave the app there, it will crash after a while. So far its happening on the Settings app, and on the Play Store as well.
Click to expand...
Click to collapse
I tried this a couple of times and couldn't replicate the issues you're experiencing.
#### New PixelExperience Plus Release ####
Changelog:
- Fixed OEM charger (thanks @spakkkkkk for finding the fix)
- Fixed random reboot while phone is off with OEM charger
https://telegra.ph/New-PixelExperience-Plus-Release--MONET-10-06
maluueu said:
I tried this a couple of times and couldn't replicate the issues you're experiencing.
Click to expand...
Click to collapse
On EvolutionX this doesn't happen. Will try today with the latest build to check.
Edit, yep still the same. The recents problem. Sometimes i cannot go to home screen immediately and i have to repeat the gesture to get out of the stuck app.
Ive managed to capture the problem in the latest build https://sourceforge.net/projects/sm...t/PixelExperience/New Tree (stable)/20211005/
MetallicGR said:
Ive managed to capture the problem in the latest build https://sourceforge.net/projects/sm7250-releases/files/Monet/PixelExperience/New Tree (stable)/20211005/
Click to expand...
Click to collapse
Okay, I could replicate the issue. We know where it originates from and will try to fix it now
Thanks @maluueu
#### New PixelExperience Plus Release #### MONET
Changelog:
- Latest PixelExperience Plus updates (20211017)
- Display color fixed
- Disabled HD sim notification
- Fixed fingerprint payment in apps (AliPay and others)
- Clean up useless init files
- Optimized
- Fixed FM radio
- Display color fixed
- Set display color to normal as default, not adaptive anymore
- Using 64 bit binder
Release Notes: https://telegra.ph/New-PixelExperience-Plus-Release--MONET-10-18
Wow, so the issue for the swipe from bottom was the FOD all along :")
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
StatiXOS for Essential PH-1 (mata)
What is StatiXOS?
StatiXOS is a custom ROM based on the Android Open Source Project aiming to be minimal while providing quality of life improvements and up to date security patches.
Spoiler: Known Issues
Some minor Launcher bugs (thanks AOSP)
SElinux Permissive
Spoiler: Download StatiXOS Here!
Primary
SourceForge Mirror
Spoiler: How To Flash
1. Download the image
2. Reboot your Essential Phone to bootloader and plug it in to your computer
3. Now open up your Terminal (macOS and Linux) or Command Prompt (Windows) and download the firmware from the links below.
4. Once downloaded, type in fastboot -w to make sure your /data is formatted
5. Now type in fastboot update <location of the firmware>, things will be automated from this point on.
6. Profit!
Spoiler: Stay in touch with our Telegram channels!
Official Chatroom
Official Releases & Announcements Channel
Prerequisite firmware: Latest stock Android 10
Android version: 12.1.0
Linux Kernel Version: 4.4.205
Source code: GitHub
Code Review: Gerrit
Trying it now thank you for the work and dedication!
I flashed this firmware and everything is fine. But when I flashed magisk, the screen seemed to move a little to the right. The screenshot is OK, but it can be seen in the photo.
Before flash Magisk
Code:
adb shell wm size
Physical size: 1312x2560
After flash Magisk
Code:
adb shell wm size
Physical size: 1376x2560
btbochs said:
I flashed this firmware and everything is fine. But when I flashed magisk, the screen seemed to move a little to the right. The screenshot is OK, but it can be seen in the photo.
Click to expand...
Click to collapse
This issue showed at one or two latest StatiXOS Android 11 builds for mata, after installing Magisk. According to Anay, one the team devs, it could be related to "the kernel thinks you’re in recovery, so it shifts the whole framebuffer 64 pixels".
The fix was to use a kernel from previous builds not affected or to wait until the issue can be fixed with StatiXOS Android 12, because Android 11 builds were EOL.
Currently in use, the problems found are that the night light mode is invalid, and the hot spot is opened, setting the password, and others' connection fails
if magisk is not supported, what is the alternative for rooting the rom? thank you.
Does Google pay work with this?
On statix A11, how to update/flash from los recovery
I noticed that, even in previous versions of statixos 4.x, there is a wifi performance gap. On the aosp version, for example, the test is passed with about 300mbps in download, while on statixos it is around 100mbps. Have you also noticed this?
digitalsimon said:
I noticed that, even in previous versions of statixos 4.x, there is a wifi performance gap. On the aosp version, for example, the test is passed with about 300mbps in download, while on statixos it is around 100mbps. Have you also noticed this?
Click to expand...
Click to collapse
Yes
Vi7eta said:
Yes
Click to expand...
Click to collapse
There are possible fixes, maybe from next releases?
Someone have idea about what cause this gap?
Deleted
I love this ROM and am very appreciative of the work you've done to keep my favorite phone off all time going. Magisk compatibility would be a nice addition. And maybe a pixel launcher version that allows the 2X2 grid pattern and super large icon folders on the desktop. Old people approved. Good work.
jeddy877 said:
I love this ROM and am very appreciative of the work you've done to keep my favorite phone off all time going. Magisk compatibility would be a nice addition. And maybe a pixel launcher version that allows the 2X2 grid pattern and super large icon folders on the desktop. Old people approved. Good work.
Click to expand...
Click to collapse
is it that good? I've been wanting to install it but I fear of bugs and battery issues (since my battery is already trash because of age)
Mario3DS said:
is it that good? I've been wanting to install it but I fear of bugs and battery issues (since my battery is already trash because of age)
Click to expand...
Click to collapse
It is fast. I haven't noticed a difference in battery life. Chrome doesn't work. I use the browser. Even the 360 mod works. The screen and battery are really easy to replace. I did it on the PH-1 here. My white one is stock and it's is a little tired. The ROM probably fully works on Verizon. I switched to Visible and it only partially works. It fully works on my Mint SIM.
jeddy877 said:
It is fast. I haven't noticed a difference in battery life. Chrome doesn't work. I use the browser. Even the 360 mod works. The screen and battery are really easy to replace. I did it on the PH-1 here. My white one is stock and it's is a little tired. The ROM probably fully works on Verizon. I switched to Visible and it only partially works. It fully works on my Mint SIM.
Click to expand...
Click to collapse
Does the rom has any customization options in setting? would you provide some SC for it,tnx
ali.sbi said:
Does the rom has any customization options in setting? would you provide some SC for it,tnx
Click to expand...
Click to collapse
It doesn't really have any customization options other than the normal A12 stock ones. I also noticed yesterday that I can no longer flash boot images or even restore it to stock firmware. The AB partitioning seems to be gone. Love the ROM but there should be a way to leave it. I may have just not figured it out yet.
jeddy877 said:
It doesn't really have any customization options other than the normal A12 stock ones. I also noticed yesterday that I can no longer flash boot images or even restore it to stock firmware. The AB partitioning seems to be gone. Love the ROM but there should be a way to leave it. I may have just not figured it out yet.
Click to expand...
Click to collapse
I haven't used this rom yet but as far as I know, a rom can't remove the A/B partitioning on a device
This awesome ROM is flashed just like flashing the stock firmware using flashall.bat. When I try reflashing the stock firmware, it says NO NO. The size of some file is too large. If I try to flash just any boot image, including the one from this ROM, to _a or _b in fastboot... It says AB partitioning is not supported by this device.