I need a little help about flash with sp flash tool.....before I take the hammer. (softbricked) - Alcatel 1 Questions & Answers

Hi guys my new victim is Alcatel 1 5033f (1/16).
1. I had opened the bootloader with a pc tool but I didnot think about dm verity... so my phone first going in orange state, with 5sec warning. (i was have fastboot....then)
2 I have tried remove the warning with "lk.bin flashing in fastboot" It wasnot succesful I made some mistakes because my screen is shows only lines... and no fastboot its allways rebooting after a few seconds.
After this I try to restore with sp flash tool, but I didnot finded EXACTLY this rom. Somebody told me that 5033a is also good then I downloaded all necessary files and try to flash but I allways have a "brom cmd fail 00003 and I cant do.
I started this project without any overthinking off course I didnot made any backup.
So I know this is a cheap phone but new... can somebody help me in sp flash progress?

MrWienerberger(brick) said:
Hi guys my new victim is Alcatel 1 5033f (1/16).
1. I had opened the bootloader with a pc tool but I didnot think about dm verity... so my phone first going in orange state, with 5sec warning. (i was have fastboot....then)
2 I have tried remove the warning with "lk.bin flashing in fastboot" It wasnot succesful I made some mistakes because my screen is shows only lines... and no fastboot its allways rebooting after a few seconds.
After this I try to restore with sp flash tool, but I didnot finded EXACTLY this rom. Somebody told me that 5033a is also good then I downloaded all necessary files and try to flash but I allways have a "brom cmd fail 00003 and I cant do.
I started this project without any overthinking off course I didnot made any backup.
So I know this is a cheap phone but new... can somebody help me in sp flash progress?
Click to expand...
Click to collapse
Hi, did you make any progress? I also have Alcatel 1 5033F with vRB3V (11-04) ROM. If you can advise how to make the backup of the ROM, I can send it to you.

Related

Soft brick and fastboot

hey i got a z today and i root it with towelroot, after that i unlocked the bootloader or at least tried (it siad succses for the first time then i tought i made a mistake maybe and tried again, and it got stuck every time.)
anyway everytime i tried putting recovery or flash an img on fastboot, it said failed,
somehow (and i dont know how) i got to have cmw recovery on it, altough everytime it failed for no appreant reason,
even flashmod didnt work. anyway i installed a rom, and it soft bricked (you know vibrate and show a flicking red light on the led)
and i dont know what to do in both modes i get a fail no matter what i do, even with flashtool and even with cmd prompt
i need help, im working sunday and i wont be home for 3 weeks i need to fix it,
tnx in advance,
sorry for the double posting,
btw,i can enter both mode from the soft brick, to fastboot and flashmod
and the error it tell me is "to many links"
C6603 and even in the unlocking procces its says (thorugh sony website) FAILD command not allowed
Already done that. And fix it. Thank you all

My Huawei P9 is stuck in bootloop i think?

Hi, i have tried to remove my root and unlocked bootloader as I didnt think they were correctly installed in the first place. Also I wanted to install a new oem update that it keep reminding me of in the background. So now after doing alot of things found in forums and youtube I have come to an end point were the phone just comes to the bootscreen, "your devise has been unlocked and cant be trusted." from here it is just stuck with the "your devise is now booting..." then nothing happens so I realy need help now, otherwise I will have to buy a new phone within the next days.. I cant still get into the twrp and format/wipe data etc, so is it something in here I need to fix then?
Anyone that can please help me out a bit?
Regards Kristoffer
I'm having the same issue. I am unable to flash a custom rom or an official rom. One issue I am having is that I can not relock the bootloader as I get an command not allowed. Please can someone help with this issue.
Thanks
Sent from my SM-G928F using Tapatalk
I have the same issue try to flash stock ROM 182 and latter or directly 132, is important to flash 132 BCS is the only really complete rom
Luigi Ra said:
I have the same issue try to flash stock ROM 182 and latter or directly 132, is important to flash 132 BCS is the only really complete rom
Click to expand...
Click to collapse
But I cant get into the twrp anymore, only the fastboot and recue mode and the huawei erecovery mode, and in this the wifi just gives me failed to download the package or something like that.... ://
I managed to get in recovery by running the oem unlock. The problem I have is that I am unable to lock the bootloader again.
I really want to get the phone working again. I don't want to have to send the device to a Huawei Service Centre since the bootloader has been unlocked.
I really hope someone can help us all get the device back to stock firmware.
Thanks
How did you get to the recovery mode? I cant get to the twrp anymore, i think i did something wrong and wiped data or formated it so now i can only se bootup screen, or huawei logo or get to fastboot and rescue mode. There it says phone unlocked and frp (or something) in green letters lock....? And also the huawei erecovery which i cant do anything in...
I run fastboot oem unlock and flashed twrp using fastboot.
I have managed to flash update.app, Default_hw.app, Default_normal.app and Default_eu.app using an app called DC Phoenix, but now when the phone boots it goes in to eRecovery and the touchscreen doesn't work. Even when I flash twrp again the touchscreen still doesn't work.
Please can someone advise what to do to get the touchscreen and the other phone back to normal.
Thanks
Were i find a link for step by step rooting my huawei p9 lite. I have company from amateurs pretty good ones. So i cant make mistakes. Thnx for the help...rock the world wild and free whopppaaa

Stuck at Fastboot after try to unlock

Hi,
sorry fpr my english but im stuck.
I try to unlock my phone with Xiaomi MiToolV2 and flashing Xiaomi.EU. I case of some strange behaviors i did not work. The tool try to reboot to TWRP (it flaehd it) and i comes to this small Menu when you start to unlock your phone.
After that i recognize that i dont want TWRP - but i cant found a way back. All Tuts are writing about do that with "Twrp", but all of that are encrypted and im a little bit nooby.
So. I read a lot and find MiFlash 2018.11.15.0 and the Stock Roms (Dev and Full Stock). I try to flash my system, but nothing happens the flasher runs 800 Seconds and wont end with flashing.
My system still boots only to fastboot and TWRP.....im confused how i get my phone back.
Shoud i wait or should i die? System was unlocked
Hexxer said:
Hi,
sorry fpr my english but im stuck.
I try to unlock my phone with Xiaomi MiToolV2 and flashing Xiaomi.EU. I case of some strange behaviors i did not work. The tool try to reboot to TWRP (it flaehd it) and i comes to this small Menu when you start to unlock your phone.
After that i recognize that i dont want TWRP - but i cant found a way back. All Tuts are writing about do that with "Twrp", but all of that are encrypted and im a little bit nooby.
So. I read a lot and find MiFlash 2018.11.15.0 and the Stock Roms (Dev and Full Stock). I try to flash my system, but nothing happens the flasher runs 800 Seconds and wont end with flashing.
My system still boots only to fastboot and TWRP.....im confused how i get my phone back.
Shoud i wait or should i die? System was unlocked
Click to expand...
Click to collapse
Read the whole thread, hope this helps, cheers
https://forum.xda-developers.com/Mi-9/how-to/unbrick-mi9-bootloader-locked-destroyed-t3924966

Question Big Problem Need some Help

Hey i spend today a lot of time to tried to fix my bricked Redmi Note 10 5G.
I just wanted to unroot my phone but i did something wrong.
First problem i have is the dm-verity corrupt.
So i read and tried this
https://forum.xda-developers.com/t/...g-bricked-but-has-access-to-fastboot.4366655/
Without succes i flashed the right firmware for my device many times but the dm-verity corrupt is still there and then i keeps hanging in the redmi boot logo.
But i dont know how but now i also got my bootloader locked so now i cant flash any thing.
And the dm-verity corrupt and keeps hanging on the redmi bootlogo.
So i hope some one have an solution for me and can help me and fix my phone.
u have made a common mistake. u have flashed firmware with miglash, without change default option to flash all. you have select flash all and lock. so yout phone is hard bricked. i think theres a guide to solve this. search on this forum
wetito said:
u have made a common mistake. u have flashed firmware with miglash, without change default option to flash all. you have select flash all and lock. so yout phone is hard bricked. i think theres a guide to solve this. search on this forum
Click to expand...
Click to collapse
Hey thanks for the reply
i know i made a mistake and i search and tried anything what i thougt it is maybe a solution on this forum.
Bun without any succes and because my bootloader is locked now i cant do anything in the fastboot.
i dont know how to unlocked now.
Because the bootloader is locked now i think i have the Guarantee now but if the i boot the phone the dm-verity corrupt message is still there and then it keeps hangin on the redmi logo.
So if there is no way to fix it i think go trie it to bring it to the store where i bought it 2 months ago.
i think you can solve using mtk spflash tool
look here, u can find the solution
Soft Bricked Phone
Hello, I need help. I tried to flash back to stock firmware using mi flash tool but it said error and it failed. I tried to flash again and then it didn't detect the device. It rebooted on its own and now it's stuck on bootloop with black...
forum.xda-developers.com
Hey thanks for the
wetito said:
i think you can solve using mtk spflash tool
look here, u can find the solution
Soft Bricked Phone
Hello, I need help. I tried to flash back to stock firmware using mi flash tool but it said error and it failed. I tried to flash again and then it didn't detect the device. It rebooted on its own and now it's stuck on bootloop with black...
forum.xda-developers.com
Click to expand...
Click to collapse
Hey thnks gor this guide but i cant get it found it in the sp flash tool.
I dont get my phone in the BRom mode to find it so im stuck there tried servel of times when it power of to get my phone BRom mode how dos the screen look if its in BRom mode ?
By pressing the vol + vol - and pwr button when its off id ont get it in the BRom Mode.
Also i googled the sp flash tool to download it so maybe i dont have tight one do you have mabe some links for me?
Or is there maybe a other way to fix my phone?
try this tool. seems very good. but i didn't never used. so you had to try by yourself. it have many interesting and usefull function
Home - Tool All In One
TOOL ALL IN ONE This tool support 67 different devices of some different OEMs. DOWNLOAD CHANGELOG XDA THREAD OTHERS PROJECTS
toolaio.tk
wetito said:
try this tool. seems very good. but i didn't never used. so you had to try by yourself. it have many interesting and usefull function
Home - Tool All In One
TOOL ALL IN ONE This tool support 67 different devices of some different OEMs. DOWNLOAD CHANGELOG XDA THREAD OTHERS PROJECTS
toolaio.tk
Click to expand...
Click to collapse
That also didn't work do i go to reseller today and hope i hot a new one of the gonna fix it.
Becuase the bootloader is locked again warrenty only the dm-verification message is there.
Do gonna say i updated my phone and now its not booting anymore.
Or do you or maybe some one do have an tutorial program or tool to fix it.
Download ROM for your phone and extract to desktop. Reboot to fastboot and open flashall.bat. it should run firmware through and reflash phone completely. Boot phone and on boot screen keep pressing power so phone can boot and bypass DM Verity error. Once booted reboot into fastboot again and enter fastboot oem cdms. Reboot phone and DM Verity should be gone.
passion8059 said:
Download ROM for your phone and extract to desktop. Reboot to fastboot and open flashall.bat. it should run firmware through and reflash phone completely. Boot phone and on boot screen keep pressing power so phone can boot and bypass DM Verity error. Once booted reboot into fastboot again and enter fastboot oem cdms. Reboot phone and DM Verity should be gone.
Click to expand...
Click to collapse
we repeats same anawers continuosly.i dont understand why some users decide to mod their devices, if they dont know how to use Google, and don't understand how to follow the flashing guides step by step. and finally after flashing custom rom, they ask how back to stock
wetito said:
we repeats same anawers continuosly.i dont understand why some users decide to mod their devices, if they dont know how to use Google, and don't understand how to follow the flashing guides step by step. and finally after flashing custom rom, they ask how back to stock
Click to expand...
Click to collapse
Get what you are saying, think there is at least 8 threads on same topic.
Hey thanks for the answers and the things i could tried to fix my phone.
im not a noob with rooting and flashing android phones before i do flasshong or rooting and the other stuff i always read and check the xda forum before i do.
With other android phones that i had before i made some misstakes before but like a bootloop or something else that the phone not was booting but always i can fix the phone.
So the problem what i had with my Redmi note 10 5G and not one solution that i found on xda or something that maube could fix the problem nothing could fix it.
So i a couple of week ago i went to the reseller and they send it to a repair center.
I think the coudnt also fix it because the did a boardswap.
I think if they cam fix it with a tool or software and reflashing the phone they did.
Now i wait some time before i go rooting or flashing stuff on my phone i hope there will be good twrp so thning go musch easier in the future to fix stuuf like (DM-VERITY Corruption.
twrp is not necessary. fix dm-verity is easy. the are MANY MANY MANY post where is explained how to do. root new phones is dofferent but not complicated. magisk works fine if installed following the latest guides. it's impossible damage mainbord after a root procedure. sure you didnt follow the guides with attention. i have rooted my global phone many times without problems. simply you have made a bad flash of vbmeta or product partition. you made a big mistake, cause this devices can be rooted without brick

Help to Flash 'preloader.bin' via MTK-Client-command line

need to flash this last file via MTK-Client to try the restoration of a bricked device.
tried to flash it via SP Flash tool with no success, device not recognized (a complete mess!!!!)
I restored via command line all ROM .images, Vendor and Firmware files download from Original Custom ROM MT6768 (xiaomi mi note 9)
all exept 1, 'preloader.bin', this because mtk-client returned an error for a 'no specific partition location for that file'
currently, device is still dead and give no sign, but inside has been flashed quite all, is it possible that 'preloader.bin' can fix all and revive the device ???!!!
help is really appreciate, thanks anyway
Did you try flashing the full stock rom in EDL mode? Try this guide : https://forum.xda-developers.com/t/...icked-redmi-note-9-merlin-hard-brick.4347025/
Thanks very much, your help was precious, a thousend million billion thanks !!!!
you revived the device back again ... I can see the light back again after flat days
but from the state of coma now it is on the post surgery state !
It is in a non-stop boot-loop, and when it reach recovery it show up a 'NV data is corrupted'
I re-flash 3 time, with the command in SP Flash Tool 'Format whole flash' but none of this worked
thanks really anyway for your support, really kind !!!!!!!
thtechnician said:
Did you try flashing the full stock rom in EDL mode? Try this guide : https://forum.xda-developers.com/t/...icked-redmi-note-9-merlin-hard-brick.4347025/
Click to expand...
Click to collapse
@thtechnican
I just love you right now, Man,
completely straight way.
Thank you. Be healthy, Have beautiful women, and that you never run out of anything you need.
@matteo555
It is in a non-stop boot-loop, and when it reach recovery it show up a 'NV data is corrupted' I re-flash 3 time, with the command in SP Flash Tool 'Format whole flash' but none of this worked thanks really anyway for your support, really kind !!!!!!!
Click to expand...
Click to collapse
Master, you did what I did - you reset all memory completely and -thanks to The Dude- restored the ability to run it. You probably lost the imei and other serious information, są flash stock rom and look for a thread about recreating the missing information - nvram.img etc. It's a miracle that I boot mine without disassembling, because I would throw it out the window. In my case it was Nokia 3.1 and thought I could create my own a/b rom instead of using lineage os 16 in gsi treble mode.
It was supposed to be few moments, but I lost 4 evenings and propably should buy another garbage to owner . Fortunately, I don't have to.

Categories

Resources