Yesterday I unlocked my phone with the official Xiaomi unlock tool, Then it wiped everything, after setting my phone up, I flashed TWRP (not for my device but for redmi k20, I thought 9T and K20 is the same) and now I'm stuck on fastboot, I tried power button + volume buttons but still stuck on fastboot, I tried adb but still stuck, I tried Reiboot for Android but still stuck. So I used XiaoMiTool V2 (unofficial) and selected 'my device is bricked' then it asked me to select what device am I using, I selected k20 bc I thought it's the same with redmi power, after downloading a rom for an hour, it tries to install but fails because it detects that it's not k20, so I closed it and rebooted my device, now my device only shows the charging battery icon, can't boot into fastboot, can't boot into anything, PC can't detect my phone including adb. Please help me (for free), I really need your help. Thanks!
Your mistake was booting a wrong twrp and then a wrong fastboot rom. You could have saved your device when it was in fastboot mod by flashing an official fastboot rom for your device. But now your device seems hopeless. I think you have no option but to send it to a service center.
In this Case, buy only from Trusted Places! Or Learn how to Flash properly.
If the bootloader is unlocked...
Flash vbmeta.img
Then flash the suitable recovery for 9 power... It might boot to recovery then
Related
Yeah, I'm not feeling very smart right now.
Short story:
Accidentally wiped OS in TWRP, now only seem to have access to fastboot. Can I fix this? Flash another ROM? Anything? Bootloader is unlocked, can't seem to get into TWRP anymore. Power + Volume up only takes me to fastboot again.
Long story:
Magisk module caused a bootloop. Wanting to try and avoid a factory reset, I tried sideloading Magisk for TWRP which didn't work, ultimately gave up and wanted to perform a factory reset via TWRP, but I've been working late and ticked the wrong box without thinking. Bad idea, I know. Wiped system, yes.
Aside from feeling exceptionally stupid, can this situation be salvaged? The phone doesn't switch off, it just sits in fastboot. I have Minimal ADB and Fastboot on my PC. Any help will be greatly appreciated, really.
Just in case anyone else ends up with a similar problem, the resolution was fortunately rather straightforward - I needed to grab the Mi Flash tool (as it turns out, this version worked best), stock firmware for my version, go into fastboot (which was no issue as that was the only thing my phone would do) and then open the Mi Flash tool and flashing the firmware was pretty straightforward from there. I even managed to get a BSOD during the process, but it's not like it could get any worse, anyway. Rebooted, restarted the process and about 10-15 minutes later, my phone was happily booting again.
divided by zero said:
Just in case anyone else ends up with a similar problem, the resolution was fortunately rather straightforward - I needed to grab the Mi Flash tool (as it turns out, this version worked best), stock firmware for my version, go into fastboot (which was no issue as that was the only thing my phone would do) and then open the Mi Flash tool and flashing the firmware was pretty straightforward from there. I even managed to get a BSOD during the process, but it's not like it could get any worse, anyway. Rebooted, restarted the process and about 10-15 minutes later, my phone was happily booting again.
Click to expand...
Click to collapse
With Fastboot mode and Mi flash as fail safes , we can flash to our hears content with no worries !
Also a more automated tool is a custom mi flash tool by a developer called XiaimiToolV2 ,which has a dedicated mode for bricked phones or downloads the latest fastboot roms for you.
crs951 said:
With Fastboot mode and Mi flash as fail safes , we can flash to our hears content with no worries !
Also a more automated tool is a custom mi flash tool by a developer called XiaimiToolV2 ,which has a dedicated mode for bricked phones or downloads the latest fastboot roms for you.
Click to expand...
Click to collapse
I have similar problems , but my Mi9 is not recognized by PC and wont enter fastboot . Only sign of life is blinking white LED sometimes I connect it to charger,to PC or try to turn it on.
Can anyone suggest me what to do ?
mstaglicic said:
I have similar problems , but my Mi9 is not recognized by PC and wont enter fastboot . Only sign of life is blinking white LED sometimes I connect it to charger,to PC or try to turn it on.
Can anyone suggest me what to do ?
Click to expand...
Click to collapse
I had excaxtly that witha my mi5 , completely dead .
Leave it on the charger for a little bit,mine after an unsuccessful flash with mi flash (catastrophic error message) it turned back on.
IF not download XiaomiTool V2 and try the option for bricked phones.
I tried that yesterday but that option is still in development. Only the modifications one is supported currently. As for the issue mentioned, maybe it's really just a matter of charging the phone first. Can't hurt either way.
mstaglicic said:
I have similar problems , but my Mi9 is not recognized by PC and wont enter fastboot . Only sign of life is blinking white LED sometimes I connect it to charger,to PC or try to turn it on.
Can anyone suggest me what to do ?
Click to expand...
Click to collapse
Try to use the EDL mode
How to force it to EDL by key combination or maybe deep flash cable ?
My Mi account is authorized for EDL flash but I cant get Mi9 into EDL mode on my PC ( Windows10 )
No OS, but working TWRP
Hi,
I have a similar problem with my mi 9.
I followed a really bad description for the update xiaomi.eu from MIUI10 to MIUI11.
https://www.chinahandys.net/xiaomi-eu-rom-update/
It recomended to wipe alvik / Art Cache, Cache AND System :crying:
So I do not have no OS any more. However, TRWP is still working.
I have a Backup but it did not work :crying:
Is there a better option than the Mi Flash tool?
Please help me!
Since you already have TWRP, download the latest Xiaomi.eu custom ROM available for the Mi 9, which is 9.11.7 to your computer.
Also download the latest TWRP by Mauronofrio from XDA which is 3.3.1-42.
Then use adb to transfer both the ROM and TWRP to your Mi 9.
In TWRP, install TWRP first and manually reboot to twrp using the vol up + power button.
In TWRP, install the ROM, do a factory reset, then finally reboot.
Sent from my MI 9 (Cepheus) using Tapatalk
sangbuana said:
Since you already have TWRP, download the latest Xiaomi.eu custom ROM available for the Mi 9, which is 9.11.7 to your computer.
Also download the latest TWRP by Mauronofrio from XDA which is 3.3.1-42.
Then use adb to transfer both the ROM and TWRP to your Mi 9.
In TWRP, install TWRP first and manually reboot to twrp using the vol up + power button.
In TWRP, install the ROM, do a factory reset, then finally reboot.
Sent from my MI 9 (Cepheus) using Tapatalk
Click to expand...
Click to collapse
Thank you very much for your reply.
When I tried to make my TWRP backup work I had several problems.
First was "vendor read only". So I went in TWRP to "mount" and unticked the "mount vendor partition read-only" (sounds easy, took me some time to find out)
Then I was able to do the restore without error message. However just boot loop and only the possibility to access TWRP.
After some while I realized that this restored the wiped system partition.
So I flashed the aktual MIUI 11 9.11.7 again and rebooted.
And it worked perfectly! :victory:
I did no Factory reset all the time, it seems that everything is perfect!
No lags, no problems with the camera, no issues with auto rotation.
Tom
Hello, after unsuccessful OTA update my phone doesnt boot into Android any more.
I had an original, untouched xiaomi system (not a custom one, not rooted etc).
Bootloader locked like default.
I think update.zip could be faulty - I have no idea how.
I am able to run Fastboot but due locked BL I cannot do much there.
I deasemble phone, pull out the battery, connected EDL pinouts with a wire, and all this togetcher connecter to PC.
Phone is visible by PC.
Downloaded ROM, and tried to flash via MI Flash..
On last moment I am getting error with information that my mi.com account is not athourised to do such a thing.
I tried also Mi Flash Pro founded on Cyanogenmod forum, but without luck - still getting same error.
Does anyone know how to get out from this situation or should I rather open warranty process in Gearbest?
sabbath88 said:
Hello, after unsuccessful OTA update my phone doesnt boot into Android any more.
I had an original, untouched xiaomi system (not a custom one, not rooted etc).
Bootloader locked like default.
I think update.zip could be faulty - I have no idea how.
I am able to run Fastboot but due locked BL I cannot do much there.
I deasemble phone, pull out the battery, connected EDL pinouts with a wire, and all this togetcher connecter to PC.
Phone is visible by PC.
Downloaded ROM, and tried to flash via MI Flash..
On last moment I am getting error with information that my mi.com account is not athourised to do such a thing.
I tried also Mi Flash Pro founded on Cyanogenmod forum, but without luck - still getting same error.
Does anyone know how to get out from this situation or should I rather open warranty process in Gearbest?
Click to expand...
Click to collapse
Just flash a custom recovery, the device even had the offical twrp. So?? Just not into fastboot and then flash the recovery by the -- command
fastboot flash recovery recovery.img
(You have to rename the twrp file to recovery or whatever, just write the image file name instead of recovery in the second one. Ex fastboot flash recovery 123.img)
Then command
Fastboot reboot
(Hold the power up button for booting into twrp before hitting enter)
Download a miui recovery rom for your device from anywhere, I don't know I'm lazy.
And before flashing, go into mount select vendor and system if not selected.
And then select wipe
Advanced wipe
Select vendor system data cache.
Swipe to clean
Move the rom to your device
(If your device does not show up in your pc, then go into mount (twrp) select enable MTP if it's disabled, if it shows disabled then enable it again)
After that just flash your rom and then a permissive patch you can ask anyone. Or just flash pitchblack recovery. Fixed my problem of not not booting.
Sorry for the wrong format, wrote it on mobile, as I am a lazy bum.
Wut bruh.
Something similar happened to my friend's Poco F1. It was locked and I only could boot into fastbook, looked everywhere for a solution and found this lifesaving tool . It may work for Redmi 8 too.
ChakibDEV said:
Something similar happened to my friend's Poco F1. It was locked and I only could boot into fastbook, looked everywhere for a solution and found this lifesaving tool . It may work for Redmi 8 too.
Click to expand...
Click to collapse
thanks so much, that helped
Hi everyone. I tried to install a global Rom and magisk to Xiaomi 6x twrp mode. After installing and pressing boot to system the phone won't boot. It stays black. Cant go to fastboot mode and recovery mode. When i plug in the cell to PC it makes a noise and to device manager shows the cell. But i see nothing on the screen. I think i have bricked my Xiaomi. What can i do please help. I tried to go in EDL mode but cant flash with Xiaomi tools. It comes: "Only nop and sig tag can be received before authentication."
Please guys help me i dont know what to do else.
Genti9000 said:
Hi everyone. I tried to install a global Rom and magisk to Xiaomi 6x twrp mode. After installing and pressing boot to system the phone won't boot. It stays black. Cant go to fastboot mode and recovery mode. When i plug in the cell to PC it makes a noise and to device manager shows the cell. But i see nothing on the screen. I think i have bricked my Xiaomi. What can i do please help. I tried to go in EDL mode but cant flash with Xiaomi tools. It comes: "Only nop and sig tag can be received before authentication."
Please guys help me i dont know what to do else.
Click to expand...
Click to collapse
you have ARB4 & converted wayne so bricked now with fastboot partially blocked
search for dummy.img
even if screen is black you can go to fastboot by using volume down and power button ..aftee you hear drivers install on pc open fastboot
then flash dummy.img ..
then flash twrp custom recovery ..
then flash custom rom from twrp ..
hi
i tried to install twrp with the help of a how to on the web but after flashing it and booting to recovery i had only black screen
so i tried to enter fastboot to fix it with no luck the phone doesn't respond to volume down + power
i manage to use adb reboot bootloader to enter fastboot when the phone was on black screen
so i tried again and flashed twrp image and misc.bin but it didnt work either
last thin i tried is installing boot.img extracted form official rom file >>and that was the end of the line for me
the phone keeps booting to redmi logo and before it even shows the Unlocked lock icon it shuts down and reboot again in an endless loop and i couldn't power it off or enter fastboot or recovery because volume up or volume down + power isn't getting any response
is there a fix to this ?
Any help?
I can help you bro
softmaster3 said:
hi
i tried to install twrp with the help of a how to on the web but after flashing it and booting to recovery i had only black screen
so i tried to enter fastboot to fix it with no luck the phone doesn't respond to volume down + power
i manage to use adb reboot bootloader to enter fastboot when the phone was on black screen
so i tried again and flashed twrp image and misc.bin but it didnt work either
last thin i tried is installing boot.img extracted form official rom file >>and that was the end of the line for me
the phone keeps booting to redmi logo and before it even shows the Unlocked lock icon it shuts down and reboot again in an endless loop and i couldn't power it off or enter fastboot or recovery because volume up or volume down + power isn't getting any response
is there a fix to this ?
Click to expand...
Click to collapse
What was your MIUI Version before installing twrp. You will lose your data for the fix. But its the matter of phone or no phone.
softmaster3 said:
Any help?
Click to expand...
Click to collapse
You device was global varient or chinese varient ?
You can checkout tutorials on using SP Flash tool to flash stock firmware, or I can explain when I get home. Also use spflash tool with MTK auth bypass or you won't be able to flash.
Had a pretty bad month as I completely killed my phones software. Heck I even deleted the preloader which is the core responsible thing for a mediatek chip based phone to boot. BUT SP flash tool saved the day.
You hard-bricked your phone, there's a guide I've made on how to recover it here.
[GUIDE][UNBRICK] How unbrick your bootloop in MERLIN after flashing TWRP (Xiaomi Redmi Note 9 / Xiaomi Redmi 10X 4G)
If you try to flash the file misc.bin your device can be in bootloop forever, please follow this guide to fix it. It works with: - Xiaomi Redmi Note 9 - Xiaomi Redmi 10X 4G Method 1: Once your device is on the black screen, plug it on USB (try...
forum.xda-developers.com
Hi i just oficialy unlocked bootloader, flashed twrp recovery boot and restarted phone. After that restart, phone got stuck in loop rebooting to MI logo. Recovery and Fastboot not loading when i press right buttons. Phone just vibrate and keep restarting. I had to dry off battery to turn it off becouse when i connect phone to cable it auto turn on and start restarting. I tryed also unplug battery and flash it by other rom but connection with pc is broken when phone still restarting every 5s. Is there any chance to save this phone from scrap? Thank you
Durien Daragoth said:
Hi i just oficialy unlocked bootloader, flashed twrp recovery boot and restarted phone. After that restart, phone got stuck in loop rebooting to MI logo. Recovery and Fastboot not loading when i press right buttons. Phone just vibrate and keep restarting. I had to dry off battery to turn it off becouse when i connect phone to cable it auto turn on and start restarting. I tryed also unplug battery and flash it by other rom but connection with pc is broken when phone still restarting every 5s. Is there any chance to save this phone from scrap? Thank you
Click to expand...
Click to collapse
You might want to take a look at this.
[GUIDE]How to reboot to EDL from fastboot
Most Qualcomm-based Android PDAs support emergency download (EDL) mode allowing to unbrick device, unlock bootloader or modify protected device parameters. If ADB interface is accessible, "adb reboot edl" can be used to reboot to EDL mode. Many...
forum.xda-developers.com
Obi_Wlan said:
You might want to take a look at this.
[GUIDE]How to reboot to EDL from fastboot
Most Qualcomm-based Android PDAs support emergency download (EDL) mode allowing to unbrick device, unlock bootloader or modify protected device parameters. If ADB interface is accessible, "adb reboot edl" can be used to reboot to EDL mode. Many...
forum.xda-developers.com
Click to expand...
Click to collapse
Thank but phone simply dont booting to fastboot mode.
Durien Daragoth said:
Thank but phone simply dont booting to fastboot mode.
Click to expand...
Click to collapse
You have to experiment with some button combinations. I ran into the same problem with a different phone two years ago. Read everything about this even if fastboot isn't working right now.
[GUIDE][TOOL] Reboot to EDL mode from FASTBOOT! No More "Test Point Method"! [kenzo]
[GUIDE][TOOL] Reboot to EDL mode from FASTBOOT! No More "Test Point Method"! [kenzo] Reboot to EDL mode from FASTBOOT! No more Test Point Method needed ;) Technical Details: Redmi Note 3 support rebooting to EDL in Android Bootloader aboot...
forum.xda-developers.com
Service centre will be your best bet
Durien Daragoth said:
Hi i just oficialy unlocked bootloader, flashed twrp recovery boot and restarted phone. After that restart, phone got stuck in loop rebooting to MI logo. Recovery and Fastboot not loading when i press right buttons. Phone just vibrate and keep restarting. I had to dry off battery to turn it off becouse when i connect phone to cable it auto turn on and start restarting. I tryed also unplug battery and flash it by other rom but connection with pc is broken when phone still restarting every 5s. Is there any chance to save this phone from scrap? Thank you
Click to expand...
Click to collapse
first let's go, download the fastboot stock version of the ROM then download Miflash, unzip the rom on your main disk twice, now on your cell phone you will press the power off button and at the same time the fastboot button (you must have messed up the file boot so it doesn't turn on) and play Miflash also on C disk, open Miflash on mobile in fastboot mode and select ROM folder don't forget to put the option to just clean and not lock, when the process is finished you wait for the phone to turn on
Player__y said:
first let's go, download the fastboot stock version of the ROM then download Miflash, unzip the rom on your main disk twice, now on your cell phone you will press the power off button and at the same time the fastboot button (you must have messed up the file boot so it doesn't turn on) and play Miflash also on C disk, open Miflash on mobile in fastboot mode and select ROM folder don't forget to put the option to just clean and not lock, when the process is finished you wait for the phone to turn on
Click to expand...
Click to collapse
If you have any, let me know on discord, 𝑃𝑙𝑎𝑦𝑒𝑟#2028
Thx but phone dont booting to fastboot mode so i cant flash boot.img i tryed now SP Flash too in linux and still same errors becouse phone disconecting too fast. I think technician service will be solution..
Dont use The daanm Sp flash Tool , Its for mediatek devices, USE Miflash, and Its impossible a phone dont boot in fastboot mode, try again, pls hold The button
I have both Mi flash and SP flash tool
Without fastboot you cant do much...
in Miflash it dont do anything even device it dont see on COM3
in SP flash too it react but with errors becouse of disconecting
phone dont boot right becouse both A and B boot images are corrupted.
Does your screen at boot turn red? I've done everything on my cell phone, several things have happened to me and not once did fastboot have a problem, because fastboot is a totally different place to boot, there is only this possibility if you used commands in adb to remove or do something in fastboot that made it useless, it's impossible to happen this in the way you said
yes i did adb commands in fastboot becouse i instaled recovery and this all happend after reboot
no problem doing things in adb, I said in the sense that you deleted fastboot in adb but that didn't happen by the way you said
Turn off your phone.
Press and hold the Power + Volume Down buttons together and immediately connect the device to the PC. You need to time it perfectly.
It will automatically boot into EDL mode, and LED lights may blink.
Download QPST Flash Tool and install your device's firmware using QFIL(comes included in QPST).
I suggest you to read everything about it online.
Obi_Wlan said:
Turn off your phone.
Press and hold the Power + Volume Down buttons together and immediately connect the device to the PC. You need to time it perfectly.
It will automatically boot into EDL mode, and LED lights may blink.
Download QPST Flash Tool and install your device's firmware using QFIL(comes included in QPST).
I suggest you to read everything about it online.
Click to expand...
Click to collapse
I tryed but not succes. It just booting every 5s nowhere. Cant get to EDL mode sorry. And correct turn off phone isnt possible i have to unplug battery flex cable but i also tryed. Only possible state where it dont restarting is when battery is unpluged and i connect phone on cable with pc and pressing volume down+power. But connection to COM3 is only 2s.
Well, in that case you need to short the test points on your motherboard and plug the phone into your PC at the same time.
Watch several videos related to it on YouTube first.
Wait, is your phone Redmi Note 11 or 11s?
I will try the point test. I have Redmin Note 11s.
Ahhhh...you posted it on Note 11 forum.
Can't help you mate. Things are more complicated in mediatek devices.
Still, this thread might help a little. Good luck.
(Guide) How to fix a hard bricked Redmi Note 9 (Merlin) (Hard Brick)
A how-to guide of restoring a completely bricked Redmi Note 9 Hi, In this guide, I will teach you how to fix a hard-bricked Redmi Note 9 (merlin) and bring it back to its original state. How does a hard-bricked Redmi Note 9 look like? it's stuck...
forum.xda-developers.com
Now i have bit progress with python im able to hold COM3 port connection around 60s. But when i start SP Flash Tool it will always make error. STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001) and STATUS_ERR (0xC0010001) , STATUS_BROM_CMD_FAIL
I finally managed to connect device for longer time cca 1 min with MTKMETAUtilityV49 and it helped me also disable auhorized connection for SP Flash tool V5. By this i formated whole disc except bootloader. Now phone dont self restarting so it is prepared for instal fresh rom. I think this will be again problem becouse i geting this error after few seconds of flashing: STATUS_SEC_IMG_TOO_LARGE