* First of all, I flashed the latest ColorOs 12.1 firmware using the fastboot enhance tool 1.3 posted in this github
Releases · libxzr/FastbootEnhance
A user-friendly Fastboot ToolBox & Payload Dumper for Windows - libxzr/FastbootEnhance
github.com
-----> the flash was successful and the device booted normally
Next, I tried to root the device. I downloaded the patched boot.img file to be applied by magisk from this url:
[OP10Pro] Color OS A.15.zipIt was listed under the following thread : https://forum.xda-developers.com/t/root-oneplus-10-pro-color-os-oxygen-os.4401243/
I then put the device on Fastboot mode and used the command: fastboot flash boot boot.img where boot.img is the file I downloaded from the above link----> this resulted into a boot loop
* I extracted the stock boot.img from the payload.bin using the tool found in that thread:
How to Extract payload.bin and get stock boot image file
To extract the payload.bin file from Android stock firmware and get stock boot image file, you should refer to the instructions given in here.
www.droidwin.com
I tried to flash it using the same command: fastboot flash boot boot.img-----> the bootloop remained
* I tried to flash stock vbmeta, vendor_boot.img and boot from boot.img using the following commands:
fastboot --disable-verity --disable-verification flash vbmeta_a vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta_b vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta_system_a vbmeta_system.img
fastboot --disable-verity --disable-verification flash vbmeta_system_b vbmeta_system.img
fastboot flash --disable-verity --disable-verification vbmeta_vendor_a vbmeta_vendor.img
fastboot flash --disable-verity --disable-verification vbmeta_vendor_b vbmeta_vendor.img
fastboot flash vendor_boot vendor_boot.img
fastboot boot boot.img
all the commands ran without a problem however, the bootloop still remained.
As a last resort, I tried to flash the stock firmware again using the fastboot enhance tool 1.3 that I used in the first step, the tool showed that operation was complete, like it did in the first step. Then I clicked reboot to system. The reboot was initiated and the oneplus logo appeared for few seconds then, it disappeared and since then, nothing appeared on the screen.
I tried all power clicking combos to get the phone to enter any mode (fastboot or recovery). All of them failed. The screen since then is turned off and the phone does not turn on or enter any mode regardless which buttons I click. I tried:
press and hold power button
keep pressing power button+ vol up
keep pressing power button + vol down
keep pressing power button+ vol up + vol down
All of them failed to turn the phone on, The screen remained completely black.
I thought the device went out of charge so I left it connected to the charger for like 15 minutes. Still this did not affect any thing
Any one knows how can I solve this problem?
Thanks in advance
lordvoldmort said:
* First of all, I flashed the latest ColorOs 12.1 firmware using the fastboot enhance tool 1.3 posted in this github
Releases · libxzr/FastbootEnhance
A user-friendly Fastboot ToolBox & Payload Dumper for Windows - libxzr/FastbootEnhance
github.com
-----> the flash was successful and the device booted normally
Next, I tried to root the device. I downloaded the patched boot.img file to be applied by magisk from this url:
[OP10Pro] Color OS A.15.zipIt was listed under the following thread : https://forum.xda-developers.com/t/root-oneplus-10-pro-color-os-oxygen-os.4401243/
I then put the device on Fastboot mode and used the command: fastboot flash boot boot.img where boot.img is the file I downloaded from the above link----> this resulted into a boot loop
* I extracted the stock boot.img from the payload.bin using the tool found in that thread:
How to Extract payload.bin and get stock boot image file
To extract the payload.bin file from Android stock firmware and get stock boot image file, you should refer to the instructions given in here.
www.droidwin.com
I tried to flash it using the same command: fastboot flash boot boot.img-----> the bootloop remained
* I tried to flash stock vbmeta, vendor_boot.img and boot from boot.img using the following commands:
fastboot --disable-verity --disable-verification flash vbmeta_a vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta_b vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta_system_a vbmeta_system.img
fastboot --disable-verity --disable-verification flash vbmeta_system_b vbmeta_system.img
fastboot flash --disable-verity --disable-verification vbmeta_vendor_a vbmeta_vendor.img
fastboot flash --disable-verity --disable-verification vbmeta_vendor_b vbmeta_vendor.img
fastboot flash vendor_boot vendor_boot.img
fastboot boot boot.img
all the commands ran without a problem however, the bootloop still remained.
As a last resort, I tried to flash the stock firmware again using the fastboot enhance tool 1.3 that I used in the first step, the tool showed that operation was complete, like it did in the first step. Then I clicked reboot to system. The reboot was initiated and the oneplus logo appeared for few seconds then, it disappeared and since then, nothing appeared on the screen.
I tried all power clicking combos to get the phone to enter any mode (fastboot or recovery). All of them failed. The screen since then is turned off and the phone does not turn on or enter any mode regardless which buttons I click. I tried:
press and hold power button
keep pressing power button+ vol up
keep pressing power button + vol down
keep pressing power button+ vol up + vol down
All of them failed to turn the phone on, The screen remained completely black.
I thought the device went out of charge so I left it connected to the charger for like 15 minutes. Still this did not affect any thing
Any one knows how can I solve this problem?
Thanks in advance
Click to expand...
Click to collapse
Flash the stock boot image (color is) from the current firmware you are on. Extract it with payload dumper. Flash it the same way you just did. After that your phone should boot normally again. After this take that patched image and instead of doing fastboot flash boot boot.img do fastboot boot boot.img if it boots then open magisk and select install (if warning show up and say magusk need to reboot device ignore and cancel from messenger) then direct install and reboot. This will patch your image from your firmware and not use the one that you booted
lordvoldmort said:
I then put the device on Fastboot mode and used the command: fastboot flash boot boot.img where boot.img is the file I downloaded from the above link----> this resulted into a boot loop
Click to expand...
Click to collapse
this is where you screwed up.
have you tried using the stock recovery?
is there any solution?
My device is non rooted stock version updated latest stable IN andoid 12.1.
It was become dead in my pocket on Saturday. No key combination was working. No response on laptop connection.
I went to service center. It is alive today. Will take delivery today.
Thay told me if water damage then warranty will be void.
Related
Please help.......give me a guide to flash stock ROM by fastboot mode.....also please provide the fastboot commands
:crying:
Curious8 said:
Please help.......give me a guide to flash stock ROM by fastboot mode.....also please provide the fastboot commands
:crying:
Click to expand...
Click to collapse
Do you have fastboot and frp unlocked?
Yes it is frp unlocked
Check my answer in this thread.
Hope it helps! And if it does, please hit the Thanks button.
please try this :
- download full update rom for your device, extract the .APP files using HuaweiUpdateExtractor
- boot into fastboot by press and hold Volume Down and plug in usb cable into your pc and your phone, hold it until it boot into fastboot
- do this :
fastboot flash kernel kernel.img
fastboot flash ramdisk ramdisk.img
fastboot flash recovery_ramdisk recovery_ramdis.img
fastboot flash recovery_vbmeta recovery_vbmeta.img
fastboot flash recovery_vendor recovery_vendor.img
fastboot flash system system.img
fastboot flash vbmeta vbmeta.img
fastboot flash vendor vendor.img
- reboot your device and hold Volume Up and Volume Down to get it boot into eRecovery and do Wipe Cache Partitions and then do Factory Data Reset, and reboot again
- let it boot normally, and see what happen next, i can't remember for sure because it's been so long i unbricked my Nova 2s with this method. there are 2 possibility, you'll boot into system normally, or it will boot into eRecovery again and there is an option Download Latest Version And Recovery and you can choose that, of course you should have connection to internet via wifi.
please report back if you have difficulties.
heindrix said:
please try this :
- download full update rom for your device, extract the .APP files using HuaweiUpdateExtractor
- boot into fastboot by press and hold Volume Down and plug in usb cable into your pc and your phone, hold it until it boot into fastboot
- do this :
fastboot flash kernel kernel.img
fastboot flash ramdisk ramdisk.img
fastboot flash recovery_ramdisk recovery_ramdis.img
fastboot flash recovery_vbmeta recovery_vbmeta.img
fastboot flash recovery_vendor recovery_vendor.img
fastboot flash system system.img
fastboot flash vbmeta vbmeta.img
fastboot flash vendor vendor.img
- reboot your device and hold Volume Up and Volume Down to get it boot into eRecovery and do Wipe Cache Partitions and then do Factory Data Reset, and reboot again
- let it boot normally, and see what happen next, i can't remember for sure because it's been so long i unbricked my Nova 2s with this method. there are 2 possibility, you'll boot into system normally, or it will boot into eRecovery again and there is an option Download Latest Version And Recovery and you can choose that, of course you should have connection to internet via wifi.
please report back if you have difficulties.
Click to expand...
Click to collapse
Hi, please don't ask me how I did this but I somehow hardbricked my phone, Model: LLD-L21
currently status is literally a brick, screen doesn't even turns on, holding keys doesn't lead to anything, Only thing I have is fastboot command, in fact when I connect my phone to PC, I hear connecting sound from windows and fastboot drive is up, (even in bootloader the screen is off) so what I have:
FRP is unlocked
Bootloader is unlocked
last installed firmware was EMUI 8
working fastboot
literally nothing more, how can I unbrick this brick my own?
[update]:
I tried your solution but at last part, vendor cannot be flashed (Command not allowd) and I guess no hope
Curious8 said:
Yes it is frp unlocked
Click to expand...
Click to collapse
How you did FRP unlock?
Keep booting to erecovery itself
please try this :
- download full update rom for your device, extract the .APP files using HuaweiUpdateExtractor
- boot into fastboot by press and hold Volume Down and plug in usb cable into your pc and your phone, hold it until it boot into fastboot
- do this :
fastboot flash kernel kernel.img
fastboot flash ramdisk ramdisk.img
fastboot flash recovery_ramdisk recovery_ramdis.img
fastboot flash recovery_vbmeta recovery_vbmeta.img
fastboot flash recovery_vendor recovery_vendor.img
fastboot flash system system.img
fastboot flash vbmeta vbmeta.img
fastboot flash vendor vendor.img
- reboot your device and hold Volume Up and Volume Down to get it boot into eRecovery and do Wipe Cache Partitions and then do Factory Data Reset, and reboot again
- let it boot normally, and see what happen next, i can't remember for sure because it's been so long i unbricked my Nova 2s with this method. there are 2 possibility, you'll boot into system normally, or it will boot into eRecovery again and there is an option Download Latest Version And Recovery and you can choose that, of course you should have connection to internet via wifi.
please report back if you have difficulties.
heindrix said:
please try this :
- download full update rom for your device, extract the .APP files using HuaweiUpdateExtractor
- boot into fastboot by press and hold Volume Down and plug in usb cable into your pc and your phone, hold it until it boot into fastboot
- do this :
fastboot flash kernel kernel.img
fastboot flash ramdisk ramdisk.img
fastboot flash recovery_ramdisk recovery_ramdis.img
fastboot flash recovery_vbmeta recovery_vbmeta.img
fastboot flash recovery_vendor recovery_vendor.img
fastboot flash system system.img
fastboot flash vbmeta vbmeta.img
fastboot flash vendor vendor.img
- reboot your device and hold Volume Up and Volume Down to get it boot into eRecovery and do Wipe Cache Partitions and then do Factory Data Reset, and reboot again
- let it boot normally, and see what happen next, i can't remember for sure because it's been so long i unbricked my Nova 2s with this method. there are 2 possibility, you'll boot into system normally, or it will boot into eRecovery again and there is an option Download Latest Version And Recovery and you can choose that, of course you should have connection to internet via wifi.
please report back if you have difficulties.
Click to expand...
Click to collapse
Frp and bootloader locked so i cannot flash using fastboot and full firmware is not available for lld-al10c675
wow, both frp and bootloader locked, maybe you need DC UNLOCKER to workaround that.
heindrix said:
wow, both frp and bootloader locked, maybe you need DC UNLOCKER to workaround that.
Click to expand...
Click to collapse
I gave it to service centre they will replace mobo for free
arshilhonor6x said:
I gave it to service centre they will replace mobo for free
Click to expand...
Click to collapse
good for you then.
Both the fastboot images does not have stock recovery at the moment. We were not able to pull that because magisk modifies boot.img and results in no boot. if vbmeta is flashed with --disable-verity --disable-verification, it results in persistent TWRP.
Ideally, you wouldnt have to replace anything other than system,vendor,vbmeta and boot. I have added them just in case you need them.
NOTE :
Android 10 is not backwards compatible with 9 firmware. So, once you open that can of worms, there is no going back for now.
Code:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash --disable-verity --disable-verification vbmeta vbmeta.img
fastboot flash boot boot.img
Links :
https://www.androidfilehost.com/?w=files&flid=304989
Hi, I don't know if things have changed in A.59, but, after unlocking to bootloader and flashing TWRP I can't get into recovery!
fastboot flash recovery TWRP-UNOFFICIAL-RMX2020-3.5.2-10-STABLE.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Poweroff (by pressing power for 10ish seconds), then
Power + Vol+
doesn't work.
The stock firmware seems to rewrite the recovery image if it gets a chance to boot
fastboot boot TWRP-UNOFFICIAL-RMX2020-3.5.2-10-STABLE.img
doesn't work
I managed to get into TWRP a few days ago by random key presses and usb cable plugging but no longer.
Alternatively can I flash a rom/GSI from fastboot?
fastboot flash system ~/lineage-17.1-20210512-UNOFFICIAL-treble_arm64_avS.img
doesn't work
Many thx guys..
OK, after watching some YT's I realised my fastboot version must have been old as I couldn't:
fastboot reboot recovery
I've used the latest version I'm in TWRP
Ricedroid 8.6
Unlock the bootloader,
Go to fastboot mode,,
Type
Fastboot reboot bootloader
Fastboot reboot fastboot
Fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
(Vbmeta.img extract from your current stock rom).
Fastboot erase system
Fastboot reboot fastboot
Fastboot flash system system.img
(System.img is downloaded gsi rom and extract the zip and put it in system.img )
Fastboot -w
Fastboot reboot bootloader
Fastboot erase userdata
Fastboot reboot
(After mobile rebooting or go to the recovery mode and you need to format data wipe data in recovery mode).
Installation method of gsi rom
1st you install treble info apk
Then you will see supported or not..
My device is realme 8 pro
I installed currently ricedroid 8.6 arm64- slim bgN
Everything is working properly
Volte working,
(You need to some sitting in treble sitting).
(Go to sitting,
Phh treble sitting,.
Ims features,
Click
Requist ims network,
Presence of 4 g network
Then,
Click install ims apk for qualcomm vendor.
Then apk downloaded,
Then install it.
Facelook working,.
I don't know about fingerprint because before install gsi rom my fingerprint already gone.
I am definitely going to try this. But before I do I need a way to go back to stock rom.
I already have a 8 Pro(IN) bootloader unlocked .
I remember using the ofp flash tool for flashing realme ui 3.0 from 2.0... on my device.
Striker3214 said:
I am definitely going to try this. But before I do I need a way to go back to stock rom.
I already have a 8 Pro(IN) bootloader unlocked .
I remember using the ofp flash tool for flashing realme ui 3.0 from 2.0... on my device.
Click to expand...
Click to collapse
You can revert back to rui in realme 8 pro with this method.
1.) First of all you need
laptop,
Usb data cable,
Minimal adb & fastboot setup,
firmware.
MCT ofp extractor tool.
and Your device.
Download below files.
Firmware:
Download your device Firmware (ofp file).
MCT OFP extractor tool:
https://drive.google.com/file/d/1-MgGdT9fxi2LtJ1DIOxLVSM67thj9EpG/view?usp=drivesdk
Minimal adb & fastboot setup:
ADB & FASTBOOT.rar | by IamNH for Realme 2 Pro
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
2.) Extract the ofp file package by mct ofp extract tool.
3.) Request to unlock your device bootloader by indeapth test apk, once approved then you can start deep testing and unlock bootloader.
4.) connect your device with laptop.
5.) Open minimal adb & fastboot terminal.
and flash this images files by below cmd.
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash metadata metadata.img
fastboot flash opporeserve2 opporeserve2.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
Note: Flash this only 3 super images
fastboot flash super super.0.xxxxxx.img
fastboot flash super super.1.xxxxxx.img
Note: During super 2 flash check super_map.csv file for related country
fastboot flash super super.2.xxxxxx.img
fastboot flash vbmeta_system vbmeta_system.img
fastboot flash vbmeta_vendor vbmeta_vendor.img
fastboot flash vbmeta vbmeta.img
fastboot flash userdata userdata.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot -w
fastboot reboot
Disclaimer: I am not responsible for bricked devices, dead SD cards, etc!
Don't Lock your device bootloader otherwise it will brick and you have to go service centre for fix.