(Alcatel 1S) bootloop - Alcatel 1 Questions & Answers

Hello everyone
I locked bootloader to get my default system back but i didn't remember that i erased recovery partition and my phone stuck at bootloop.
Is any solution for that?

Related

Stuck in TWRP Recovery after flashing "twrp-3.0.2-0-m7cdwg.img" by flashify.

Stuck in TWRP Recovery after flashing "twrp-3.0.2-0-m7cdwg.img" by flashify.
Dear All,
I was in boot loop due to error of "com.htc.htcdialer" I was helpless to install twrp recovery every time i tried to install mobile gets reboot.
so i decided to keep "twrp-3.0.2-0-m7cdwg.img" in sd-card and flashed this file by flashify tool.
After flashing "twrp-3.0.2-0-m7cdwg.img" i cleared delvik cache(as somebody suggested to do this to get rid from boot loop which came due to "com.htc.htcdialer" ), and made backup of current rom now i am not able to go back to normal system start.
Here are some details of HTC ONE M7 (802d)
Android version= 4.4.2
It is "rooted unlocked" device not "factory unlocked".
Pl help thanks in advance

P9 lite bricked after Root

Hi all im in need of help. I wanted to root my phone, so i flashed TWPR. After root when i boot, it want me to write some encrypt code. I guess i should do a factory resete, but TWPR is failed to mount the data partition also fastboot failed to do the same.
So any idea would be really appriciated!
Can you boot into fastboot (phone off, boot with power+volume down)?
Wrong forum mate!

Only able to access fastboot, boot and recovery mode both fail.

Hello Guys,
Yesterday I tried to root my Moto 2g.
Unlocked it's bootloader,Installed Twrp and installed supersu. Also downloaded a custom mod(the most famous one I guess) and installed it,only to find out that the phone would no longer boot
but keep looping on the unlocked bootloader warning screen.While thinking that I had downloaded a non-compatible mod I Installed another one.After that,booting the phone would Instantly
take me to the recovery mode and keep looping the Teamwin logo.
I decided not to mess anymore with it and reinstall the stock firmware for moto 2g. After Installing it the Motorola logo comes up and then I am taken to the fastboot screen once again with the error saying:
"Fastboot reason,Fell through from boot recovery mode".Tried to flash CWM to see If I could get into recovery mode from there but I would get CWM logo loops exactly the same way they appeared with Teamwin logo.
Seems like phone is dead to me but still have a bit of hope,although the only place I can get is fastboot.
Edit:I tried to fastboot flash boot boot.img the stock image and I got and error saying that boot.img(10mb) exceeded the partition limit
shatterbb said:
Hello Guys,
Yesterday I tried to root my Moto 2g.
Unlocked it's bootloader,Installed Twrp and installed supersu. Also downloaded a custom mod(the most famous one I guess) and installed it,only to find out that the phone would no longer boot
but keep looping on the unlocked bootloader warning screen.While thinking that I had downloaded a non-compatible mod I Installed another one.After that,booting the phone would Instantly
take me to the recovery mode and keep looping the Teamwin logo.
I decided not to mess anymore with it and reinstall the stock firmware for moto 2g. After Installing it the Motorola logo comes up and then I am taken to the fastboot screen once again with the error saying:
"Fastboot reason,Fell through from boot recovery mode".Tried to flash CWM to see If I could get into recovery mode from there but I would get CWM logo loops exactly the same way they appeared with Teamwin logo.
Seems like phone is dead to me but still have a bit of hope,although the only place I can get is fastboot.
Edit:I tried to fastboot flash boot boot.img the stock image and I got and error saying that boot.img(10mb) exceeded the partition limit
Click to expand...
Click to collapse
try flashing the whole Stock Firmware
It might help,
U said u flashed a MOD over stock ROM?
If so, u should have boot first Just After unlocking the bootloader before Flashing any MODs
raj_45 said:
try flashing the whole Stock Firmware
It might help,
U said u flashed a MOD over stock ROM?
If so, u should have boot first Just After unlocking the bootloader before Flashing any MODs
Click to expand...
Click to collapse
I did boot after unlocking and normally flashed whole stock firmware.This morning I woke up and the error message in fastboot is 'boot up failed' for bot normal and recovery mode
shatterbb said:
I did boot after unlocking and normally flashed whole stock firmware.This morning I woke up and the error message in fastboot is 'boot up failed' for bot normal and recovery mode
Click to expand...
Click to collapse
is this your problem
raj_45 said:
is this your problem
Click to expand...
Click to collapse
Ok let me explain the situation better.Last night I used a stock firmware I found and flashed it.When I tried to boot I would see motorola logo once
fore boot mode,Then it would go to recovery so I would see it for a second time and then I would see teamwin logo looping so the phone was not
able to get into recovery mode but only into bootloader.
After That I flashed CWM and the same thing would happen with CWM logo looping now in recovery mode.
Today I woke up and flashed CWM again,and for some reason I could get into CWM and use it normally
So what I did is Installed Supersu and a mod for my xt1068 and tried to boot but phone stuck in the same endless loop again and I also cant get
into CWM again as its logo keeps flashing instead of taking me into the menu.
I believe there is an error with my data folder or partition or w/e.
Most of all I want to be able to get into CWM again
shatterbb said:
Ok let me explain the situation better.Last night I used a stock firmware I found and flashed it.When I tried to boot I would see motorola logo once
fore boot mode,Then it would go to recovery so I would see it for a second time and then I would see teamwin logo looping so the phone was not
able to get into recovery mode but only into boot loader.
After That I flashed CWM and the same thing would happen with CWM logo looping now in recovery mode.
Today I woke up and flashed CWM again,and for some reason I could get into CWM and use it normally
So what I did is Installed Supersu and a mod for my xt1068 and tried to boot but phone stuck in the same endless loop again and I also cant get
into CWM again as its logo keeps flashing instead of taking me into the menu.
I believe there is an error with my data folder or partition or w/e.
Most of all I want to be able to get into CWM again
Click to expand...
Click to collapse
So u are not able to get into Recovery
And u can get to Fast boot Mode?
If yes Flash TWRP latest(3..1.0-0)
Boot into TWRP
Reset or Install any Custom ROM like LiniageOS or AOSP
I think it's the problem with SuperSU?
Which MOD did u install?
raj_45 said:
So u are not able to get into Recovery
And u can get to Fast boot Mode?
If yes Flash TWRP latest(3..1.0-0)
Boot into TWRP
Reset or Install any Custom ROM like LiniageOS or AOSP
I think it's the problem with SuperSU?
Which MOD did u install?
Click to expand...
Click to collapse
Thanks for the replies,I managed to solve the problem and install Cyanogenmod.I guess everything came up to this:
After the first time I installed twrp I decided to wipe my data folder but somehow it was deleted and the partition became raw type which caused
all the bootlooping problems.
Using CWM I was able to get into recovery mode and then I chose to format my data folder and sd card(as ext4 I guess) and the data folder was
recreated.
After that I normally flashed Cyanogenmod and device booted just fine

My H9L Is BootLoop

Hello all..
my name is daniel, i have an H9L. My H9L has been rooted and installed TWRP. I want to install a ROM called LineAgeOS, before that I have backed up the data. and I started to reset my H9L, when I wanted to install a ROM there was a problem, because the difference in my processor failed to install the ROM. and I hit it wrong, I restarted my H9L, now my H9L is on without a stock ROM, and it is strange that my TWRP is not working, just stuck in the TEAMWIN logo, can anyone help me to restore my H9L the original state, my H9L only works in the FASTBOOT MODE state, I tried to flash my H9L with ADB DRIVER but failed, I tried to flash with MICRO SD and made the dload folder but failed at 5%, what have I confused, is there anyone here who can help my problem, THANK YOU.
DjPangau said:
Hello all..
my name is daniel, i have an H9L. My H9L has been rooted and installed TWRP. I want to install a ROM called LineAgeOS, before that I have backed up the data. and I started to reset my H9L, when I wanted to install a ROM there was a problem, because the difference in my processor failed to install the ROM. and I hit it wrong, I restarted my H9L, now my H9L is on without a stock ROM, and it is strange that my TWRP is not working, just stuck in the TEAMWIN logo, can anyone help me to restore my H9L the original state, my H9L only works in the FASTBOOT MODE state, I tried to flash my H9L with ADB DRIVER but failed, I tried to flash with MICRO SD and made the dload folder but failed at 5%, what have I confused, is there anyone here who can help my problem, THANK YOU.
Click to expand...
Click to collapse
Have you tried Erecovery to restore stock?
On the bootloader unlocked warning screen press and hold volume+ for 3 secs.
Needs to use WiFi.
Try yo reflash twrp in fastboot mode. The command is fastboot flash recovery_ramdisdisk twrp. Img
Before you have to put twrp. img in the adb folder
I'm experiencing the same problem after trying to root my h9l through twrp the mistake I made is that I flashed the image in a wrong partition.
I can only access a fastboot mode with frp and phone unlocked, it cannot even display a charging screen. Once plugged it keeps on rebooting and hangs on error screen,
I have tried to flash kernel,ramdisk, recover_ramdisk and system images all on their respective partition, the flashing went well, but the phone didn't respond.
I've tried to flash boot.IMG (some one posted for h9l,) into Boot partition, but it revealed an error.
Any one please help what should I do to brings by device back to lite

[SOLVED] Mi A2 boot loop after TWRP restore

EDIT: Solved.
My Mi A2 is unlocked, rooted (Magisk), stock FW V10.0.7.0 (via OTA), not encrypted (Disable-Force-Encryption-Treble.zip)
I wanted to update to V10.0.8.0, so I booted to TWRP and performed a full backup.
After that, I loaded the original boot.img to both boot_a and boot_b, then reboot.
Then the phone auto restarted while showing Android One logo (not showing running color bar yet)
I panicked (1). I booted to TWRP and did a full restore. While restoring Firmware, there was a red error line:
"ExtractTarFork() process ended with error=255"
I pretended nothing happened and reboot. Phone was still unable to boot past the Android One screen.
I panicked (2). Then I flashed the original firmware V10.0.7.0 using official Xiaomi fastboot image (except user data). Phone was still unable to boot past the Android One screen.
I've try some other (stupid/crazy) things except for erasing user data, but phone is still unable to boot now.
Please let me know what I have done wrong, and any possible way to recover the phone without erasing user data.
Solved:
I flashed the original fastboot image, install the Disable-Force-Encryption-Treble.zip and the phone can boot up again.

Categories

Resources