(SOLVED) RoG 3 Loops On Logo After Flashing Raw - ASUS ROG Phone 3 Questions & Answers

Hi Guys.i need Help My Rog Phone Doesnt Start After Flashing Latest Raw Or Any RaW.
Phone loops on rog logo several Times and after that Only Shows Csc fastboot mod.bootloader is locked.any way To unlock without Debugging mod ?Bcoz i cant access it Now.Phone Is On Dead Mood xd
I flashed With AFT Too In the end It says Xrom Check Faild..!is this the Problam?

Unlock bootloader with official ASUS unlocker tool (may need to factory reset 1st if cannot unbrick it)

lvl0rde said:
Hi Guys.i need Help My Rog Phone Doesnt Start After Flashing Latest Raw Or Any RaW.
Phone loops on rog logo several Times and after that Only Shows Csc fastboot mod.bootloader is locked.any way To unlock without Debugging mod ?Bcoz i cant access it Now.Phone Is On Dead Mood xd
I flashed With AFT Too In the end It says Xrom Check Faild..!is this the Problam?
Click to expand...
Click to collapse
Yes if Xrom check failed that's a problem. Flash again and try using flash raw & wipe data and echo off the script so you can catch if any fails. If RAW fails, EDL will do the work.

Andrologic said:
Yes if Xrom check failed that's a problem. Flash again and try using flash raw & wipe data and echo off the script so you can catch if any fails. If RAW fails, EDL will do the work.
Click to expand...
Click to collapse
Tnx For Reply.I used Flash Raw Too.even wiped before and after flash.but What is echO Off.Can u plz Guide me.need some tutorials

elmor0 said:
Unlock bootloader with official ASUS unlocker tool (may need to factory reset 1st if cannot unbrick it)
Click to expand...
Click to collapse
Tnx But That tool Didnt work with a stupid Connection error

Keep retrying several times including restarting the phone - connection error/ failure is not unusual.
Make sure you are connected to internet while running the ASUS bootloader unlock tool.

elmor0 said:
Keep retrying several times including restarting the phone - connection error/ failure is not unusual.
Make sure you are connected to internet while running the ASUS bootloader unlock tool.
Click to expand...
Click to collapse
My phone is in dead Mood Right now.!Cant do that Just EDL and BootLoader Working.Cant Start Phone With any CN or WW Version Of rOms.i Tried Android 10..11 Flash Raw Files.After FlasH Finishes.Phone LoopS on LoGo several Times,Then Logo desappears, Only boots To Bootloader Directly,Even When i select Recovery option,Phone restarts too bootloader AGAIN

So you can access bootloader mode?

elmor0 said:
So you can access bootloader mode?
Click to expand...
Click to collapse
Yes i can.

Heeeeeelp

Can it connect to/ be recognised by the computer whilst in Bootloader mode?

elmor0 said:
Can it connect to/ be recognised by the computer whilst in Bootloader mode?
Click to expand...
Click to collapse
Yeah Phone Connects As Android Device in Device manager i Checked.in EDL mod As Qualcomm 9008.After i Flash Raw Phone Loops On Logo.Android is NoT Starting

Use ADB commands to factory reset the phone.
Then try flashing official ASUS bootloader unlock tool.

elmor0 said:
Use ADB commands to factory reset the phone.
Then try flashing official ASUS bootloader unlock tool.
Click to expand...
Click to collapse
THIS IS NOT MY PROBLEM RIGHT NOW.I CANT START MY PHONE.ITS DEAD. FLASHING WITH RAW IS USELESSS

Andrologic said:
Yes if Xrom check failed that's a problem. Flash again and try using flash raw & wipe data and echo off the script so you can catch if any fails. If RAW fails, EDL will do the work.
Click to expand...
Click to collapse
How can i flash XROM only?

Related

[Q] Nokia 8 Hard Bricked

My N8(TA1012) is hard bricked. I tried OST 6.0.4 and 6.1.2 and got error. I enter only Twrp and download mode. In Twrp, my files are corrupt. How to I fix without service?
the easy guide is use ntool.
If can use flash system and boot.img
komisermurat said:
My N8(TA1012) is hard bricked. I tried OST 6.0.4 and 6.1.2 and got error. I enter only Twrp and download mode. In Twrp, my files are corrupt. How to I fix without service?
Click to expand...
Click to collapse
Looks like you have the unlocked bootloader. Do fastboot flash unlock "your unlock.key" than fastboot oem unlock_critical and confirm unlocking on your device. Critical area restricts booting of service boots so OST can`t flash it. When the critical area is unlocked you can flash anything you want. I have TA-1004 and it works for me. I have rolled back to Nougat from Oreo this method. Hope it helps you.
komisermurat said:
My N8(TA1012) is hard bricked. I tried OST 6.0.4 and 6.1.2 and got error. I enter only Twrp and download mode. In Twrp, my files are corrupt. How to I fix without service?
Click to expand...
Click to collapse
What error you get?
But if you you have really hard-bricked (broken or drowned) nothing will help. The chips may be broken permanently and only service-center can repair it. Flashing the device in this state may kill it! But if its just result of unseccessful software experiments - try to do as I said above.

Bootloop after upgrade to Pie

hello everybody ,, if anyone facing as same my problem
ulocked bootloader and rooted then i received notification for android Pie Update
so i did it but after restart it went to bootloop for 1 hour amd still same problem , any ideas please ?
I had same problem, with MiFlash I put 9.6.10.0 and updated to 9.6.17.0
Pretty happy with this software, stable and everything works. Stay away from Pie, a lot of bugs.
Sent from my Mi A2 using Tapatalk
I had to factory reset
I had same problem. Any solution?
Odesláno z mého X52X pomocí Tapatalk
Cocagy said:
hello everybody ,, if anyone facing as same my problem
ulocked bootloader and rooted then i received notification for android Pie Update
so i did it but after restart it went to bootloop for 1 hour amd still same problem , any ideas please ?
Click to expand...
Click to collapse
If you have unlocked bootloader try with fastboot file & Mi flash tool
http://en.miui.com/download-353.html
Read Method 2: Fastboot : http://en.miui.com/a-234.html
you have to go V9.6.16.0.ODIMIFE (Android O) & after if you want update to 9.6.17 etc...
Factory Reset can not do anything in this case
[Or try with edl mode... https://in.c.mi.com/thread-37902-1-0.html
https://forum.xda-developers.com/showpost.php?p=77327325&postcount=2 ] it is not easy but can be save the device
sry for english
I tried many ways with different roms but nothing worked and bootloader locked at the end .. so i had to reset and install full rom ..anyway there wasn't important data .. thanks for your help
@ i have another question
I installed pie 10.0.2 is there patched boot for magisk and how to enable camera 2 api ..
Cocagy said:
I tried many ways with different roms but nothing worked and bootloader locked at the end .. so i had to reset and install full rom ..anyway there wasn't important data .. thanks for your help
@ i have another question
I installed pie 10.0.2 is there patched boot for magisk and how to enable camera 2 api ..
Click to expand...
Click to collapse
https://forum.xda-developers.com/mi-a2/how-to/xiaomi-mi-a2-android-9-pie-update-t3868101
see & here : https://forum.xda-developers.com/mi-a2/how-to
Cocagy said:
I tried many ways with different roms but nothing worked and bootloader locked at the end .. so i had to reset and install full rom ..anyway there wasn't important data .. thanks for your help
@ i have another question
I installed pie 10.0.2 is there patched boot for magisk and how to enable camera 2 api ..
Click to expand...
Click to collapse
Can you explain to me how you did to reset everything thank you
Pouvez vous m'expliquer comment vous avez fait pour tout réinitialisier merci
papavegan said:
Can you explain to me how you did to reset everything thank you
Pouvez vous m'expliquer comment vous avez fait pour tout réinitialisier merci
Click to expand...
Click to collapse
I downloaded the official rom from miui 8.1 then flashed it with miflasher then i upgraded it via ota , flashed patched boot for 10.0.1 and made some commands to enable camera 2api for gcam v 6+
Cocagy said:
I downloaded the official rom from miui 8.1 then flashed it with miflasher then i upgraded it via ota , flashed patched boot for 10.0.1 and made some commands to enable camera 2api for gcam v 6+
Click to expand...
Click to collapse
I am in the same situation, but instead of a bootloop, it just gets stuck in the "androidone" screen.
I can access fastboot, but not recovery menu. And of course the bootloader is locked. So I do not even now how to do the factory reset... or flash the official rom... (It always says not possible in lock state from fast boot).
Any help/specific instructions would be appreciated.
Thanks in advance
salchi13 said:
I am in the same situation, but instead of a bootloop, it just gets stuck in the "androidone" screen.
I can access fastboot, but not recovery menu. And of course the bootloader is locked. So I do not even now how to do the factory reset... or flash the official rom... (It always says not possible in lock state from fast boot).
Any help/specific instructions would be appreciated.
Thanks in advance
Click to expand...
Click to collapse
it seems like boot issue ..
If the data in storage not important you can unlock bootloader and it will force you to factory reset
If still same problem then you should flash thought miflasher and download official rom and flash it
Cocagy said:
I downloaded the official rom from miui 8.1 then flashed it with miflasher then i upgraded it via ota , flashed patched boot for 10.0.1 and made some commands to enable camera 2api for gcam v 6+
Click to expand...
Click to collapse
Cocagy said:
it seems like boot issue ..
If the data in storage not important you can unlock bootloader and it will force you to factory reset
If still same problem then you should flash thought miflasher and download official rom and flash it
Click to expand...
Click to collapse
Thanks, at this point I don´t even care about the data... and most of it is backed up.
The problem is that I had not selected the OEM unlock option, the command fasboot oem unlock does not work, and the miflash_unlock tool tells my that my account is not valid to unlock the phone. So I do not really know how to unlock the bootloader. Do you know if there is another way to unlock it/flash, that does not require opening the phone?
Context:
en.miui.com-thread-4697442-1-1
en.miui.com-thread-3560322-1-1
Thanks
For me the problem seems to be related to magisk, once I restored the original boot.img, the phone boots. If I try to flash the magisk patched boot image, it returns to bootloop. I'm using magisk v18 btw. I'm unable to get root using magisk on this PIE version
salchi13 said:
Thanks, at this point I don´t even care about the data... and most of it is backed up.
The problem is that I had not selected the OEM unlock option, the command fasboot oem unlock does not work, and the miflash_unlock tool tells my that my account is not valid to unlock the phone. So I do not really know how to unlock the bootloader. Do you know if there is another way to unlock it/flash, that does not require opening the phone?
Context:
en.miui.com-thread-4697442-1-1
en.miui.com-thread-3560322-1-1
Thanks
Click to expand...
Click to collapse
You can use these commands on fastboot mode .. it should work then try to flash rom
fastboot flashing unlock
fastboot flashing unlock_critical
I have the same problem, stuck in the androidone mode... How do I save my data , if not possible (i have all photos and videos from south america trip there) than how to unlock bootloader and do factory reset ? ^_
norbertpoland said:
I have the same problem, stuck in the androidone mode... How do I save my data , if not possible (i have all photos and videos from south america trip there) than how to unlock bootloader and do factory reset ? ^_
Click to expand...
Click to collapse
If you are lucky, maybe you activated the photo and video backups and the videos/photos from your trips have been uploaded to https://photos.google.com from the different wifi hotspots that you may have connected to.
Cant unlock by miflash unlock cause it state that my device is not assosiated with the phone number (WTF !?) how to do hard reset in that situation when only androinone logo shows me or fastboot mode. Please help me guys I am in Rio for carnival and cant make normal photos withouyt phone
Just to add that it happened at 1 of march probably after some actualization or something.
norbertpoland said:
Cant unlock by miflash unlock cause it state that my device is not assosiated with the phone number (WTF !?) how to do hard reset in that situation when only androinone logo shows me or fastboot mode. Please help me guys I am in Rio for carnival and cant make normal photos withouyt phone
Click to expand...
Click to collapse
Had the same problem, in the end I decided to send it back for warranty repairs... and that fixed it of course, they probably had to open it to flash it in EDL mode, which I think you can do if you have the right screwdriver to open the phone.
https://www.youtube.com/watch?v=Uu7V0cBu41k
Thanks buty I m not technican to open and dig inside Is there any other possibility ?
norbertpoland said:
Thanks buty I m not technican to open and dig inside Is there any other possibility ?
Click to expand...
Click to collapse
If You are able to boot phone into bootloader (even with black screen, you can check with "fastboot devices" or looking for "Android Bootloader Interface" driver in Win DevManager), you can try this: https://forum.xda-developers.com/redmi-note-3/how-to/guide-reboot-to-edl-mode-fastboot-test-t3398718 to boot phone into EDL without opening case. More than that, may be its worth trying even simple "fastboot oem edl" command),

Redmi 4 (Santoni) bricked. Please help.

I unlocked my redmi 4 (Santoni) boot loader and flashed pixel experience ROM (https://mega.nz/#F!INZgnAZI!9fuWhfCuazOO5YPBjxGlmA). It was working fine for a few days (Small heating issue was there). Then one day while i was charging the phone the phone turned off and never turn back on. When i try to switch on the mi logo flashes for a split second and then turns off. I tried to get into recovery but couldn't.
I can get into fastboot mode. I tried flashing the phone using Mi flash tool and fastboot rom. But it shows an error "flash tz error". When i tried an old version of mi flash tool i get the "Unspecified error (0x80004005: FAILED (remote: Critical partition flashing is not allowed))
Please Help.....
can you access the twrp?
foneiamone said:
can you access the twrp?
Click to expand...
Click to collapse
No. I can only access fastboot.
Somebody please help...
unbrick
u can get to edl fastboot with testpoints.
redmi 4x edl fastboot
in edl fastboot flashing should work again :angel:
PierceB said:
u can get to edl fastboot with testpoints.
redmi 4x edl fastboot
in edl fastboot flashing should work again :angel:
Click to expand...
Click to collapse
Dont know how to do that. But i saw some tutorials on how to. Gonna try it. Thank you for the suggestion.
jaseemharry said:
Dont know how to do that. But i saw some tutorials on how to. Gonna try it. Thank you for the suggestion.
Click to expand...
Click to collapse
Did already share a description! https://forum.xda-developers.com/showpost.php?p=74818435&postcount=3 Or U can buy a deepflash cable this should also work.
jaseemharry said:
No. I can only access fastboot.
Click to expand...
Click to collapse
Have you tried installing TWRP via fastboot?
I had the same exact problem, i put my phone on charge & when i came back to check it was switched off. It wouldn't turn on except the mi logo. I tried to flash through fastboot turns out my bootloader was re-locked for some reason. I had to re-unlock it then proceed on to fash fastboot miui rom. Check if your bootloader is locked or not.
foneiamone said:
Have you tried installing TWRP via fastboot?
Click to expand...
Click to collapse
obstinate_penguin said:
I had the same exact problem, i put my phone on charge & when i came back to check it was switched off. It wouldn't turn on except the mi logo. I tried to flash through fastboot turns out my bootloader was re-locked for some reason. I had to re-unlock it then proceed on to fash fastboot miui rom. Check if your bootloader is locked or not.
Click to expand...
Click to collapse
This is a good idea! Probably u first try to install trwp in fastboot mode. If this doesn't work try to unlock bootloader again and then install trwp.
When all these Option doesn't work u still can open the phone and use edl fastboot mode to flash miui again.
jaseemharry said:
I unlocked my redmi 4 (Santoni) boot loader and flashed pixel experience ROM (https://mega.nz/#F!INZgnAZI!9fuWhfCuazOO5YPBjxGlmA). It was working fine for a few days (Small heating issue was there). Then one day while i was charging the phone the phone turned off and never turn back on. When i try to switch on the mi logo flashes for a split second and then turns off. I tried to get into recovery but couldn't.
I can get into fastboot mode. I tried flashing the phone using Mi flash tool and fastboot rom. But it shows an error "flash tz error". When i tried an old version of mi flash tool i get the "Unspecified error (0x80004005: FAILED (remote: Critical partition flashing is not allowed))
Please Help.....
Click to expand...
Click to collapse
No big problem just go in edl mode
Search how to go in edl Redmi 4 in Google
Problem is your boot loader is locked
Harshad patel R said:
No big problem just go in edl mode
Search how to go in edl Redmi 4 in Google
Problem is your boot loader is locked
Click to expand...
Click to collapse
but he already unlocked his bootloader before so it should be easier to unlock in again and then flash whatever he wants...
PierceB said:
but he already unlocked his bootloader before so it should be easier to unlock in again and then flash whatever he wants...
Click to expand...
Click to collapse
One time fail in flashing = locked boot loader
Or for unlocking bootloader from official (easy) need live mobile not dead
foneiamone said:
Have you tried installing TWRP via fastboot?
Click to expand...
Click to collapse
Tried but failed. Boot loader was locked again somehow.
PierceB said:
This is a good idea! Probably u first try to install trwp in fastboot mode. If this doesn't work try to unlock bootloader again and then install trwp.
When all these Option doesn't work u still can open the phone and use edl fastboot mode to flash miui again.
Click to expand...
Click to collapse
Tried unlocking boot loader and was not successful because the phone was bricked. My only option was to use edl test point. Now i installed miui 11. (Aprart from some minor bugs which can be eliminated by reflashing some other roms) Thank you guys. Now my phone is successfully unbricked.
For somebody who is having the same issues,
My phone (Redmi 4_Santoni) was completely bricked. The only thing i can access was fastboot by pressing the volume down + Power button combination. But i could not install twrp or any other recovery because my boot loader was locked. I got it fixed completely with the help of you guys (Thanks again) and i want to share the procedure i went through.
Condition: Completely bricked with only fastboot access, Locked bootloader.
I tried this video (https://www.youtube.com/watch?v=j27x5iJSS40) but failed because i could not access recovery. So my only solution was to use edl test point flashing. I followed this guide https://forum.xda-developers.com/showpost.php?p=74818435&postcount=3. It was very easy to do. But in the device manager (Press Windows key + R and then type devmgmt.msc and press enter) instead of showing "Qualcomm HS-USB QDloader 9008", the device is shown as "Qualcomm HS-USB Diagnostics 900E". The problem was you have to plug in in USB cable while the test points is being connected with a pair of tweezers or a paperclip as shown in the link above.
Make sure you already downloaded the latest mi flash tool from here https://xiaomiflashtool.com/ and download fast boot rom from the official website. (Go to https://en.miui.com/ Click rom downloads. Click flashing guide. Download the fastboot rom from there for your device.) Now flash your device using mi flash tool and voila. your phone is unbricked.
Thank you guys..

ASUS ROG2 SOFT BRICK

Hi ,
I have an ASUS ROG2 and I'm experiencing quite a problem here , I would like to know if this can still be rescue or not? or maybe I'm missing some steps here. here's what I've done so far.
Before it got to this dilemma my phone is suffering from autoshutdown so i rooted my phone using magisk and applied the thermal mode by one of the OP here. everything is working fine , the phone is not shutting down until today. it suddenly restart before me and it is stuck in ROG Logo.
what I've done.
1) i flash the stock boot img for my firmware version 2009.49 using fastboot flash boot 2009.49stock.img both slot A & B then followed by fastboot reboot so it can boot to system but it is still stock at the ROG Logo
2) i downloaded a RAW Firmware of 2009.49 , put my phone into fastboot mode. i made sure it was detected by the PC using the command fastboot devices and surely it was. i execute the flashall_AFT.cmd and waited , after it finishes my phone reboots but still stuck at the ROG Logo and here's the problem.
I reboot my phone into bootloader , scroll to Recovery after pressing Power button to select it , it boots and stuck at the ROG Logo at this point i'm confused since i need to factory reset it. so i downloaded TWRP for ROG2 Android 10 the one i usually use then i tried to boot from it using fastboot boot twrp10.img , it only boots and stuck at the ROG Logo again
3) I tried to flash a firmware using EDL mode , everything went well without any errors and there's the success message in Xiaomiflashtool , i reboot the phone to recovery and it is still stuck in ROG Logo.
any guesses? I'm kinda lost here since both RAW and EDL are not working.
KnowThyPro said:
Hi ,
I have an ASUS ROG2 and I'm experiencing quite a problem here , I would like to know if this can still be rescue or not? or maybe I'm missing some steps here. here's what I've done so far.
Before it got to this dilemma my phone is suffering from autoshutdown so i rooted my phone using magisk and applied the thermal mode by one of the OP here. everything is working fine , the phone is not shutting down until today. it suddenly restart before me and it is stuck in ROG Logo.
what I've done.
1) i flash the stock boot img for my firmware version 2009.49 using fastboot flash boot 2009.49stock.img both slot A & B then followed by fastboot reboot so it can boot to system but it is still stock at the ROG Logo
2) i downloaded a RAW Firmware of 2009.49 , put my phone into fastboot mode. i made sure it was detected by the PC using the command fastboot devices and surely it was. i execute the flashall_AFT.cmd and waited , after it finishes my phone reboots but still stuck at the ROG Logo and here's the problem.
I reboot my phone into bootloader , scroll to Recovery after pressing Power button to select it , it boots and stuck at the ROG Logo at this point i'm confused since i need to factory reset it. so i downloaded TWRP for ROG2 Android 10 the one i usually use then i tried to boot from it using fastboot boot twrp10.img , it only boots and stuck at the ROG Logo again
3) I tried to flash a firmware using EDL mode , everything went well without any errors and there's the success message in Xiaomiflashtool , i reboot the phone to recovery and it is still stuck in ROG Logo.
any guesses? I'm kinda lost here since both RAW and EDL are not working.
Click to expand...
Click to collapse
You could try booting into TWRP 3.4.0-0 Q Unofficial by mauronofrio without flashing ( fastboot boot twrp-3.4.0-0-I001D-Q-mauronofrio.img ) , then copy the zip over to root of internal storage, either 2009.49 or lastest 2012.65, from here. Be sure to check during flash which slot gets flashed first. Then repeat the process, booting twrp so that you can flash the other inactive slot. If you want to be sure you have changed slots, click on reboot in twrp and see which is active before flashing. Good luck
Hopefully flashing both slots successfully will do it. Let us know how you get on.
reg66 said:
You could try booting into TWRP 3.4.0-0 Q Unofficial by mauronofrio without flashing ( fastboot boot twrp-3.4.0-0-I001D-Q-mauronofrio.img ) , then copy the zip over to root of internal storage, either 2009.49 or lastest 2012.65, from here. Be sure to check during flash which slot gets flashed first. Then repeat the process, booting twrp so that you can flash the other inactive slot. If you want to be sure you have changed slots, click on reboot in twrp and see which is active before flashing. Good luck
Hopefully flashing both slots successfully will do it. Let us know how you get on.
Click to expand...
Click to collapse
Hi Reg !
Thanks for replying , i think I'm using the official version of TWRP so I'll give this a try , i should overcome the obstacle of booting into TWRP..
I'll let you know the outcome.
KnowThyPro said:
Hi Reg !
Thanks for replying , i think I'm using the official version of TWRP so I'll give this a try , i should overcome the obstacle of booting into TWRP..
I'll let you know the outcome.
Click to expand...
Click to collapse
Any news?
reg66 said:
Any news?
Click to expand...
Click to collapse
I used the TWRP you've linked. and i'm afraid that it is stuck on the rog logo again..
what i've done. ' fastboot boot twrpQ3400.img ' after i sent that command , the phone reboots and instead of going to twrp , it goes to rog logo and stuck there.
is there anyway i could check if there's partition? it feels like the phone has no partition that's why it is always going back to the rog logo.
KnowThyPro said:
I used the TWRP you've linked. and i'm afraid that it is stuck on the rog logo again..
what i've done. ' fastboot boot twrpQ3400.img ' after i sent that command , the phone reboots and instead of going to twrp , it goes to rog logo and stuck there.
is there anyway i could check if there's partition? it feels like the phone has no partition that's why it is always going back to the rog logo.
Click to expand...
Click to collapse
Did you change the name of the twrp file? the fastboot boot twrp-3.4.0-0-I001D-Q-mauronofrio.img cmd must have an identical name to the file, which as the original should be twrp-3.4.0-0-I001D-Q-mauronofrio.img
and just to be sure, you have the twrp img in fastboot folder, correct?
reg66 said:
Did you change the name of the twrp file? the fastboot boot twrp-3.4.0-0-I001D-Q-mauronofrio.img cmd must have an identical name to the file, which as the original should be twrp-3.4.0-0-I001D-Q-mauronofrio.img
and just to be sure, you have the twrp img in fastboot folder, correct?
Click to expand...
Click to collapse
Yes i did rename it as twrpQ3400.img and yes also , it is in the same folder as my adb & fastboot folder enviroment.
i'll try a different approach maybe using QFIL? although i don't know where to start like finding the XML / Programmer or firehose..
any ideas?
KnowThyPro said:
Yes i did rename it as twrpQ3400.img and yes also , it is in the same folder as my adb & fastboot folder enviroment.
i'll try a different approach maybe using QFIL? although i don't know where to start like finding the XML / Programmer or firehose..
any ideas?
Click to expand...
Click to collapse
Well i'm running out of ideas, never used QFIL so wouldn't know. since you cannot boot into twrp (i'm assuming you didn't relock bootloader? twrp won't work with locked bootloader), you could try this thread. be sure to use the supplied 1910.35 images as it tried and tested. read posts 1 and 2 at the very least, post 2 has useful steps
if successful, you'll then need to update 1910.64 before android 10 2004.60 to start with, then up to latest
reg66 said:
Well i'm running out of ideas, never used QFIL so wouldn't know. since you cannot boot into twrp (i'm assuming you didn't relock bootloader? twrp won't work with locked bootloader), you could try this thread. be sure to use the supplied 1910.35 images as it tried and tested. read posts 1 and 2 at the very least, post 2 has useful steps
if successful, you'll then need to update 1910.64 before android 10 2004.60 to start with, then up to latest
Click to expand...
Click to collapse
yes , i didn't lock my bootloader since i can still see the bootloader unlock message.. i'm also running low in ideas , for worst it is a bricked phone at best. i'll check the link.
thanks for helping. i'll still update this thread to maybe update u as well.
edit: i checked the link , i already did the xiaomi flash tool approach on the link.. everything was a success with no errors... maybe i shud give qpst tool a try? although i'm not familiar using it.
KnowThyPro said:
yes , i didn't lock my bootloader since i can still see the bootloader unlock message.. i'm also running low in ideas , for worst it is a bricked phone at best. i'll check the link.
thanks for helping. i'll still update this thread to maybe update u as well.
edit: i checked the link , i already did the xiaomi flash tool approach on the link.. everything was a success with no errors... maybe i shud give qpst tool a try? although i'm not familiar using it.
Click to expand...
Click to collapse
did you remember to shut the phone down after successfully flashing, boot into recovery and wipe data, then reboot? as per the instructions...?
reg66 said:
did you remember to shut the phone down after successfully flashing, boot into recovery and wipe data, then reboot? as per the instructions...?
Click to expand...
Click to collapse
yes , ofcourse since the phone is in EDL mode the only way to shut it down is by using Power + volume up + volume down like around 15 seconds then phone will shutdown since the 9008 COM in device manager will be gone this means that it's no longer in EDL mode. i wait like 1minute before i power it up to recovery by power + volume down then scroll to recovery in bootloader. then with no luck still stuck to Rog logo..
it's like the recovery partition is gone...
KnowThyPro said:
yes , ofcourse since the phone is in EDL mode the only way to shut it down is by using Power + volume up + volume down like around 15 seconds then phone will shutdown since the 9008 COM in device manager will be gone this means that it's no longer in EDL mode. i wait like 1minute before i power it up to recovery by power + volume down then scroll to recovery in bootloader. then with no luck still stuck to Rog logo..
it's like the recovery partition is gone...
Click to expand...
Click to collapse
I've been googling for you dude but no joy yet.... will have another look tomorrow
reg66 said:
I've been googling for you dude but no joy yet.... will have another look tomorrow
Click to expand...
Click to collapse
Thanks man , i'm searching for the qfil approach but i'm getting a sahara error. currently searching for fixes
edit : i manage to boot the phone using the link you've provided by using QFIL approach and not thru XiaomiFlashTool
the phone boots successfully and i can use the recovery again ! although there's a problem , it can't read my sim card and everything is like stock android without any skins or what.. i used the RAW firmware to update it but the problem with stuck logo is back :/
gonna re-flash using QFIL and i'll check some more ~ maybe use TWRP and flash the firmware there no?
edit: the one from the link is not working , stuck at rog logo.. but the one from the internet i was able to boot to system but can't detect simcard , also when plugging to PC it will go to crashdump mode.
also can't flash TWRP will result in stuck at ROG logo :/
was able to boot the phone but can't connect to wifi and is locked by google frp :/ any guides i can follow to remove that FRP without wifi connection ?
Sorry bud, really not sure what's going on with your phone or know much more. Good luck with it tho
KnowThyPro said:
was able to boot the phone but can't connect to wifi and is locked by google frp :/ any guides i can follow to remove that FRP without wifi connection ?
Click to expand...
Click to collapse
Actually, if you now have recovery, what about booting into twrp and flashing lastest 2012.65 zip from asus website, twice - both slots. see if that fixes your wifi issue
As you said using the QFIL approach worked to boot into system and recovery is back - boot to twrp from that state
KnowThyPro said:
Thanks man , i'm searching for the qfil approach but i'm getting a sahara error. currently searching for fixes
edit : i manage to boot the phone using the link you've provided by using QFIL approach and not thru XiaomiFlashTool
the phone boots successfully and i can use the recovery again ! although there's a problem , it can't read my sim card and everything is like stock android without any skins or what.. i used the RAW firmware to update it but the problem with stuck logo is back :/
gonna re-flash using QFIL and i'll check some more ~ maybe use TWRP and flash the firmware there no?
edit: the one from the link is not working , stuck at rog logo.. but the one from the internet i was able to boot to system but can't detect simcard , also when plugging to PC it will go to crashdump mode.
also can't flash TWRP will result in stuck at ROG logo :/
Click to expand...
Click to collapse
I think my i messed my phone like yours. Can you provide me step by step? I have tried those step one by one but still stuck at rog logo

Question REDMI NOTE 10S (Your system has been destroyed+ locked bootloader) error

I have redmi note 10s. I bacame bored of miui because of several bugs. So i decided to mod the device with a nice custom rom. I started the process. Because it is a mtk device, it has complicated flashing process than snapdragon devices. I entered the fastbootD mode and cleared the system by using adb command(which i dont remember). Then i flashed the custom rom. By mistake, I locked the bootloader by typing adb command fastboot oem lock. But now due to complicated case, the device is showing your system has been destroyed and when i try to force reboot it into fastboot, it still give systen destroyed error(means fastboot mode is inaccessible). Can anyone please help me to fix this issue without using edl pins? I am in a great issue
I cant go to service center as my device is out of warranty
in google there is a pc program than can unlock bootloader of mediatek devices, search for it
Bro i cant access the bootloader, so unlocking it doesnt make any difference
I want to restore the bootloader.
Manmeet_2008 said:
I have redmi note 10s. I bacame bored of miui because of several bugs. So i decided to mod the device with a nice custom rom. I started the process. Because it is a mtk device, it has complicated flashing process than snapdragon devices. I entered the fastbootD mode and cleared the system by using adb command(which i dont remember). Then i flashed the custom rom. By mistake, I locked the bootloader by typing adb command fastboot oem lock. But now due to complicated case, the device is showing your system has been destroyed and when i try to force reboot it into fastboot, it still give systen destroyed error(means fastboot mode is inaccessible). Can anyone please help me to fix this issue without using edl pins? I am in a great issue
Click to expand...
Click to collapse
Okay so first of all download "mtk client"
Than open the mtk client
It will give you instructions on how to connect your phone, take back of everything except system(super),vendor and userdata. Tap on flash tab there you'll notice a option called unblock bootloader tap on it and your bootloader will be unlocked
Bro Will this restore my bootloader or only unlock it because if it only unlocks then your help wont work.
Manmeet_2008 said:
Bro Will this restore my bootloader or only unlock it because if it only unlocks then your help wont work.
Click to expand...
Click to collapse
you dummy, you need to unlock the bootloader in orden to restore it installing the firmware with miflashtool or mtk client .
Ok bro thanks for your help
tutibreaker said:
you dummy, you need to unlock the bootloader in orden to restore it installing the firmware with miflashtool or mtk client .
Click to expand...
Click to collapse
Manmeet_2008 said:
I have redmi note 10s. I bacame bored of miui because of several bugs. So i decided to mod the device with a nice custom rom. I started the process. Because it is a mtk device, it has complicated flashing process than snapdragon devices. I entered the fastbootD mode and cleared the system by using adb command(which i dont remember). Then i flashed the custom rom. By mistake, I locked the bootloader by typing adb command fastboot oem lock. But now due to complicated case, the device is showing your system has been destroyed and when i try to force reboot it into fastboot, it still give systen destroyed error(means fastboot mode is inaccessible). Can anyone please help me to fix this issue without using edl pins? I am in a great issue
Click to expand...
Click to collapse
try some sp flashtool that come with miflashtool , turn off phone and press volume- and plug the cable in , some type of mtk download mode
Ok bro i will try tomorrow
Hello everyone, today i used the tool but when i went through the tool i saw a 'erase flash' option in mtk universal tab. Can anyone please tell that what this option is used for and ticking it will lead to any sort of issues?
Manmeet_2008 said:
Hello everyone, today i used the tool but when i went through the tool i saw a 'erase flash' option in mtk universal tab. Can anyone please tell that what this option is used for and ticking it will lead to any sort of issues?
Click to expand...
Click to collapse
dont use it, will erase all the device data and partitions turning it into a useless brick, dude, in youtube there a lots of tutos to how restore original firmware go check them first
tutibreaker said:
dont use it, will erase all the device data and partitions turning it into a useless brick, dude, in youtube there a lots of tutos to how restore original firmware go check them first
Click to expand...
Click to collapse
Ok bro thanks for telling, will not use it for flashing
Did it work is it debricked?
Manmeet_2008 said:
I have redmi note 10s. I bacame bored of miui because of several bugs. So i decided to mod the device with a nice custom rom. I started the process. Because it is a mtk device, it has complicated flashing process than snapdragon devices. I entered the fastbootD mode and cleared the system by using adb command(which i dont remember). Then i flashed the custom rom. By mistake, I locked the bootloader by typing adb command fastboot oem lock. But now due to complicated case, the device is showing your system has been destroyed and when i try to force reboot it into fastboot, it still give systen destroyed error(means fastboot mode is inaccessible). Can anyone please help me to fix this issue without using edl pins? I am in a great issue
Click to expand...
Click to collapse
You need to sSee this video,
Make sure Disconnect your phone battery then start flash
hookkrox said:
You need to sSee this video,
Make sure Disconnect your phone battery then start flash
Click to expand...
Click to collapse
You need to see the PM I've sent to you. You will find it here.
Start from BROM mode - that is always available. Then you can use mtktool to restore everything. I have an article about it on my blog, but I am not supposed to post it here... find it in my profile, or send me a PM for help.

Categories

Resources