Database Develop

[guide] steps to flash gsi on redmi note 7

[GUIDE] STEPS TO FLASH GSI ON REDMI NOTE 7 [lavender]​
Many of us tried Flashing GSI on our Redmi Note 7 but failed due to various reasons even though it is absolutely bugless for Redmi Note 7 .
Here are the steps which i will mention below that will let us use the full potential of GSI.
Requirements :
Bootloader Unlocked
TWRP Installed
Ofcourse a working device
Installation Method :
First of all we need the flash the latest chinese beta rom.It gets updated everyweek. Since I have the cn rn7 i prefer to update the vendor partition everyweek for fixes and latest updates.But you can try on your stable rom too (I can't gurantee if things will work out on stable rom or not) .So, first of all be on china beta rom.
Go to fastboot mode and connect your pc to your device .You need to have installed xiaomi drivers to make this work properly. Once you are in fastboot ,open a terminal/cmd and type : fastboot -w ( this will erase your existing system partition and data and internal storage too , so make sure to have a backup if you have something essential on ur device)
Now considering that we have already downloaded a gsi i.e a phh GSI ..now for this case we are gonna assume its aosp as an example.. while in the fastboot mode type : fastboot flash system system.img ( here system.img(it can be of different name too) is the gsi img which you download from phh thread).
Remember : once the flash is completerd reboot to TWRP and not to system.
Once you are in twrp , flash magisk ( flash magisk latest canary as it has support for system as root devices) then press on wipe button of twrp,,,then advanced wipe..then tick mark on system and you will see repair or change file system option.Click on it..Click on repair and resize file system.
Now go to mount settings and mount system partition. Now you can flash gapps if you want .
After flashing gapps finally reboot to system
Voila! After in about 5 mins you will be booted to GSI rom
Post Installation Method :
You will have almost everything working after booting into gsi except you will run into brightness bug which you can fix by the following way
Connect your device with pc and enable mass storage
open a cmd/terminal on ur pc
type the following codes : adb shell
su ( in this case you will have to give permission from your device ; grant it)
setprop persist.sys.qcom-brightness 4095
Congragulations Now you have installed a gsi perfectly on your device
In this way you can flash almost all the gsi available on phh thread Hope this clarifies all of our problems.
Hit Thanks if I helped you somehow with this

shouldn't you be flashing disable_encrypt zip too?

repair or change file system option.Click on it..Click on repair and resize file system. I don''t get this one. There are a few options inside

PROdelision said:
shouldn't you be flashing disable_encrypt zip too?
Click to expand...
Click to collapse
No, its not required.
chiplovez9x said:
repair or change file system option.Click on it..Click on repair and resize file system. I don''t get this one. There are a few options inside
Click to expand...
Click to collapse
Make sure you have allowed modifications on system partition and also you dont have system as read only.

Does fingerprint working on GSI?

what is gsi?

I don't know much but gsi means u can flash almost all roms (which have images). And most of ROMs do have gsi images.. So u can install any rom on your phone. I don't know the steps to do so.. ?

bryanngapopala said:
what is gsi?
Click to expand...
Click to collapse
Simple speaking it's a image with clear android from google

Has anyone tested RR PIE GSI on RN7? Does it work?

Is it possible to boot Android O GSI? :silly:

letsmakecakes said:
No, its not required.
Click to expand...
Click to collapse
here's everything i did:
on miui beta.....already encrypted.
did fastboot -w
flashed latest RR gsi via fastboot
booted to twrp, flashed magisk(v19), repair and resize
reboot
asks for decryption password
where exactly am i going wrong?
able to boot if im using decrypt zip but lockscreen doesnt work.

Is the. Method the same for the global version with global rom?

letsmakecakes said:
[GUIDE] STEPS TO FLASH GSI ON REDMI NOTE 7 [lavender]​
Many of us tried Flashing GSI on our Redmi Note 7 but failed due to various reasons even though it is absolutely bugless for Redmi Note 7 .
Here are the steps which i will mention below that will let us use the full potential of GSI.
Requirements :
Bootloader Unlocked
TWRP Installed
Ofcourse a working device
Installation Method :
First of all we need the flash the latest chinese beta rom.It gets updated everyweek. Since I have the cn rn7 i prefer to update the vendor partition everyweek for fixes and latest updates.But you can try on your stable rom too (I can't gurantee if things will work out on stable rom or not) .So, first of all be on china beta rom.
Go to fastboot mode and connect your pc to your device .You need to have installed xiaomi drivers to make this work properly. Once you are in fastboot ,open a terminal/cmd and type : fastboot -w ( this will erase your existing system partition and data and internal storage too , so make sure to have a backup if you have something essential on ur device)
Now considering that we have already downloaded a gsi i.e a phh GSI ..now for this case we are gonna assume its aosp as an example.. while in the fastboot mode type : fastboot flash system system.img ( here system.img(it can be of different name too) is the gsi img which you download from phh thread).
Remember : once the flash is completerd reboot to TWRP and not to system.
Once you are in twrp , flash magisk ( flash magisk latest canary as it has support for system as root devices) then press on wipe button of twrp,,,then advanced wipe..then tick mark on system and you will see repair or change file system option.Click on it..Click on repair and resize file system.
Now go to mount settings and mount system partition. Now you can flash gapps if you want .
After flashing gapps finally reboot to system
Voila! After in about 5 mins you will be booted to GSI rom
Post Installation Method :
You will have almost everything working after booting into gsi except you will run into brightness bug which you can fix by the following way
Connect your device with pc and enable mass storage
open a cmd/terminal on ur pc
type the following codes : adb shell
su ( in this case you will have to give permission from your device ; grant it)
setprop persist.sys.qcom-brightness 4095
Congragulations Now you have installed a gsi perfectly on your device
In this way you can flash almost all the gsi available on phh thread Hope this clarifies all of our problems.
Hit Thanks if I helped you somehow with this
Click to expand...
Click to collapse
Which GSI should be needed to take? A-only or A/B ?

PROdelision said:
here's everything i did:
on miui beta.....already encrypted.
did fastboot -w
flashed latest RR gsi via fastboot
booted to twrp, flashed magisk(v19), repair and resize
reboot
asks for decryption password
where exactly am i going wrong?
able to boot if im using decrypt zip but lockscreen doesnt work.
Click to expand...
Click to collapse
I have no experience with GSI images, but I know in general that PIE breaks the encryption, if you roll back the security patch level. I don't know it this happened in your case, but I have lost couple of times my encrypted storage when I have tried to restore a backup of rom with older android patch level. After that, the bootup encryption pin is no longer accepted, neither by android nor by twrp, so the only option is to format data to remove encryption and start from scratch.
Were your miui beta and rr gsi of the same android security patch level?

Getting WRONG PIN error after setting up pin ???

letsmakecakes said:
[GUIDE] STEPS TO FLASH GSI ON REDMI NOTE 7 [lavender]
Many of us tried Flashing GSI on our Redmi Note 7 but failed due to various reasons even though it is absolutely bugless for Redmi Note 7 .
Here are the steps which i will mention below that will let us use the full potential of GSI.
Requirements :
Bootloader Unlocked
TWRP Installed
Ofcourse a working device
Installation Method :
First of all we need the flash the latest chinese beta rom.It gets updated everyweek. Since I have the cn rn7 i prefer to update the vendor partition everyweek for fixes and latest updates.But you can try on your stable rom too (I can't gurantee if things will work out on stable rom or not) .So, first of all be on china beta rom.
Go to fastboot mode and connect your pc to your device .You need to have installed xiaomi drivers to make this work properly. Once you are in fastboot ,open a terminal/cmd and type : fastboot -w ( this will erase your existing system partition and data and internal storage too , so make sure to have a backup if you have something essential on ur device)
Now considering that we have already downloaded a gsi i.e a phh GSI ..now for this case we are gonna assume its aosp as an example.. while in the fastboot mode type : fastboot flash system system.img ( here system.img(it can be of different name too) is the gsi img which you download from phh thread).
Remember : once the flash is completerd reboot to TWRP and not to system.
Once you are in twrp , flash magisk ( flash magisk latest canary as it has support for system as root devices) then press on wipe button of twrp,,,then advanced wipe..then tick mark on system and you will see repair or change file system option.Click on it..Click on repair and resize file system.
Now go to mount settings and mount system partition. Now you can flash gapps if you want .
After flashing gapps finally reboot to system
Voila! After in about 5 mins you will be booted to GSI rom
Post Installation Method :
You will have almost everything working after booting into gsi except you will run into brightness bug which you can fix by the following way
Connect your device with pc and enable mass storage
open a cmd/terminal on ur pc
type the following codes : adb shell
su ( in this case you will have to give permission from your device ; grant it)
setprop persist.sys.qcom-brightness 4095
Congragulations Now you have installed a gsi perfectly on your device
In this way you can flash almost all the gsi available on phh thread Hope this clarifies all of our problems.
Hit Thanks if I helped you somehow with this
Click to expand...
Click to collapse
Hi!
Did you not disable dm-verity and force-encryption?
Another question, the dev MIUI roms contain both the system and vendor partitions, right? How do you install only the vendor partitions from them? Or do you just flash MIUI and then reflash the custom ROM system? In that case, won't that affect dm-verity and encryption on the data partition?

Flashing correctly a GSI like in this guide; with vendor ecc ecc, will gcam work? Actually i'm on stock MIUI 10 and obv all working fine with a perfect version. My doubt is it.

Forever Alone said:
Getting WRONG PIN error after setting up pin ???
Click to expand...
Click to collapse
Did you not erase your /data partition through TWRP?
---------- Post added at 03:06 AM ---------- Previous post was at 02:46 AM ----------
Forever Alone said:
Getting WRONG PIN error after setting up pin ???
Click to expand...
Click to collapse
Did you not erase your /data partition through TWRP?

any recommended gsi rom with no bug?

booladi said:
Did you not erase your /data partition through TWRP?
---------- Post added at 03:06 AM ---------- Previous post was at 02:46 AM ----------
Did you not erase your /data partition through TWRP?
Click to expand...
Click to collapse
I did wipe userdata but not internal storage. heard its because i have unencrpyed data partition?

Orange fox 🦊 Twrp + Root for nubia play 5G android 11

THIS TWRP WORKING IN LATEST CN ROM ANDROID 11 V3.19
IN THIS UPDATE EVERYTHING WORKING GREAT
#INSTALATION#
TWRP
NUBIA play 5G UNLOCK BOOTLOADER
1. Connect your Nubia in laptop, in your laptop, open Minimal ADB and Fastboot and type the following:
a. adb reboot bootloader
b. fastboot oem nubia_unlock NUBIA_NX651J
c. fastboot flash recovery recovery.img
d. fastboot flash vbmeta vbmeta_BL_skip.img
2. select reboot to recovery
3. It will reboot in TWRP change the language to English
4. Go to WIPE option, then select FORMAT DATA, type yes
5. Press home button, then go to REBOOT, select REBOOT to RECOVERY
6. Now after reboot connect phone to pc put this (Makesysrw_1.28_flashable.zip) file in your phone
7.now go to fox/data/media and flash (Makesysrw_1.28_flashable.zip)
we flash zip file script to give you access to modify file delete system app with Esexplorer
7.Go to Menu below there are list select flash magisk 21.0 reboot to system
8.after reboot install latest magisk apk open magisk give you update and update from magisk manager reboot ur phone and enjoy
Notes .... Everything working in twrp don't changed anything in setting theme twrp
if you changed theme you got bootloop
I told you second time don't changed anything in setting theme twrp

HI,
Can this be loaded even without formatting data? The attached is not including ROM. Will this work with global rom? Thank you

hikoori said:
HI,
Can this be loaded even without formatting data? The attached is not including ROM. Will this work with global rom? Thank you
Click to expand...
Click to collapse
You need formatting data after flash twrp
Yes Its work for grlobal rom

please record a video

This method work on A10?

Do you link for latest android 11 firmware that can be flashed through ofox recovery?

Keep rebooting to fastboot after rom installation!

Hello, I was tinkering for a few days to actually use lineage os in my device. I've flash multiple TWRP across these two days from xda forums, TWRP and PBRP works fine, what bothers me is everytime I install custom rom, when I reboot the system, it will go to fastboot after showing redmi logo with unlocked bootloader. I don't seem to know what's the case, but if I flash MIUI, it will work, not with other roms.
These what I've done:
Download Rom
TWRP (already installed) & vbmeta ( https://forum.xda-developers.com/t/...omi-redmi-note-9-xiaomi-redmi-10x-4g.4218909/ )
Reboot to recovery
Wipe DATA (the right button in TWRP)
Reboot to recovery again
adb push file or copy rom zip to /sdcard or internal storage
Install Rom
Wipe data and not wipe data already tested with no avail
Reboot to system
My problem is, is it really possible to install lineageos? I've tried to install lineageos17 which is fail with logs arround the line of Error 7, and then /product (no such file is found) or something like that. My device is Redmi Note 9 Helio G85, is it not compatible? or should I try using GSI treble rom?
I've also tried to downgrade to MIUI 12.0.3.0 from 12.0.6.0, I downloaded 12.0.1.0, but haven't tried it yet.
Any help is appreciated, my pc is linux based, so if possible without much tinkering to move to windows. Thank you.

General [TWRP] [ORANGEFOX] [UNOFFICIAL] [ROSEMARY] [BETA] TWRP 3.5.2 and TWRP 3.6+ for Xiaomi Redmi Note 10s

WARNING: THIS IS EXPERIMENTAL BETA MEANT FOR DEVELOPERS AND TESTERS NOT AS DAILY DRIVER
Caution: Android 11 builds are incompatible with Android 12. Beware!
Credits:
@Woomymy
@J6idot
@mastersenpai05
@myst33d
https://github.com/notmyst33d
Developers WoomyMy, J6idot , mastersenpai05 and Myst33d have helped develop an unofficial TWRP for rosemary - xiaomi redmi note 10s
Installation Video:
Code:
https://www.mediafire.com/file/f4zcls9sgi3nkoj/352+redmi+note+10s.rar/file
http://www.mediafire.com/file/p3zhivru97bdlke/no-verity-opt-encrypt-6.1.zip/file
https://github.com/RedmiNote10S/recovery_device_xiaomi_rosemary
Since this is not yet official, only proceed if you are competent enough and brave.
(If you need instructions on how to flash, please do not flash this with fastboot method)
Feel free to discuss any bugs or issues and fixes so that everybody can benefit from our findings.
TWRP 3.6+ Development Build status, fixes, bugs and downloads: [here]​
TWRP -3.6.2_11-2
NameModifiedTWRP-3.6.2_11-208/03/2022
Changelog
Fix brightness when max brightness is 255
Render GUI at 60FPS
Reposition statusbar icons and remove top offset
A lot of code cleanup
Update TWRP sources
DONT INSTALL THIS ON MIUI 13
Install instructions
Without TWRP/OrangeFox
Note: You need a copy of your ROM boot.img
Click to expand...
Click to collapse
This device DOES NOT support fastboot boot twrp.img
Click to expand...
Click to collapse
Reboot your phone into fastboot mode
Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
Next, download TWRP .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
Reboot into recovery mode (fastboot reboot recovery)
When booted into recovery, reflash stock boot.img (Install -> Install Image -> Select stock boot.img -> “Flash to: Boot”)
Next, go in Advanced -> Flash current TWRP and swipe to flash TWRP.
Reboot and enjoy!
With custom recovery
Download TWRP .ZIP installer and flash it in recovery (you can also use adb sideload for recoveries like LineageOS recovery)
Compatibility
Android 11 Roms: YES
Android 12 Roms: NO
TWRP-3.6.2_12-rc1
NameModifiedTWRP-3.6.2_12-rc108/04/2022
Changelog
Sync TWRP sources
Add support for Android 12 decryption
Fix booting on MIUI13
DONT INSTALL THIS ON MIUI 12.5
Install instructions
Without TWRP/OrangeFox
Note: You need a copy of your ROM boot.img
Click to expand...
Click to collapse
This device DOES NOT support fastboot boot twrp.img
Click to expand...
Click to collapse
Reboot your phone into fastboot mode
Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
Next, download TWRP .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
Reboot into recovery mode (fastboot reboot recovery)
When booted into recovery, reflash stock boot.img (Install -> Install Image -> Select stock boot.img -> “Flash to: Boot”)
Next, go in Advanced -> Flash current TWRP and swipe to flash TWRP.
Reboot and enjoy!
With custom recovery
Download TWRP .ZIP installer and flash it in recovery (you can also use adb sideload for recoveries like LineageOS recovery)
Compatibility
MIUI 13 vendors: COMPATIBLE
MIUI 12 vendors:
A11 GSI / MIUI 12 system: FULLY INCOMPATIBLE
A12 GSI: COMPATIBLE, but you CAN NOT flash the boot.img, you need to flash the UPDATE ZIP using a custom recovery / Magisk
OrangeFox-R11.1_1-Unofficial
NameModifiedOrangeFox-R11.1_1-Unofficial07/01/2022
Changelog
Fix brightness when max brightness is 255
Render GUI at 60FPS
Reposition statusbar icons and remove top offset
A lot of code cleanup
Update OrangeFox sources
DONT INSTALL THIS ON MIUI 13
Update Magisk OrangeFox addon to v25.2
Install instructions
Without TWRP/OrangeFox
Note: You need a copy of your ROM boot.img
Click to expand...
Click to collapse
This device DOES NOT support fastboot boot twrp.img
Click to expand...
Click to collapse
Reboot your phone into fastboot mode
Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
Next, download OrangeFox .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
Reboot into recovery mode (fastboot reboot recovery)
When booted into recovery, reflash stock boot.img (Select stock boot.img -> “Flash to: Boot”)
Next, go in Menu -> Flash current OrangeFox and swipe to flash OrangeFox.
Reboot and enjoy!
To get Fox addons working, you need to reflash OrangeFox .zip file
With custom recovery
Download OrangeFox .ZIP installer and flash it in recovery (you can also use adb sideload for recoveries like LineageOS recovery)
Compatibility
Android 11 Roms: YES
Android 12 Roms: NO
Older versions:
NameModifiedBeta-07-11-30-202112/17/2021
🗞 Changelog
Sync TWRP sources (Version number updated to 3.6.0)
Symlink /dev/block/bootdevice -> /dev/block/platform/bootdevice (required by some scripts like OrangeFox installer)
Allow flashing VBMeta
Disable "Reflash TWRP after flashing ROM". (Causes AVB problem when installing MIUI, can still be done manually)
Build ZIP TWRP installer
Publish build logs for more transparency
Known bugs
Mounting Adopted storage
Vibrator
NameModifiedRC-01-01-09-20221/9/2022
🗞 Changelog
Fix Bootctrl
Fix vibrator
Known bugs
Mounting Adopted storage
TWRP Version 3.6.1_11-1​
NameModifiedTWRP-3.6.1_11-13/13/2022
🗞 Changelog
Fix BootCTRL
Update TWRP sources
Fix vibrator
Enable DT2W in recovery
Install instructions​Without TWRP/OrangeFox​
Note: You need a copy of your ROM boot.img
Click to expand...
Click to collapse
This device DOES NOT support fastboot boot twrp.img
Click to expand...
Click to collapse
Reboot your phone into fastboot mode
Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
Next, download TWRP .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
Reboot into recovery mode (fastboot reboot recovery)
When booted into recovery, reflash stock boot.img (Install -> Install Image -> Select stock boot.img -> “Flash to: Boot”)
Next, go in Advanced -> Flash current TWRP and swipe to flash TWRP.
Reboot and enjoy!
With TWRP/OrangeFox​
Download TWRP .ZIP installer and flash in recovery
TWRP Version 3.6.2_11-1​
NameModifiedTWRP-3.6.2_11-16/14/2022
🗞 Changelog
Sync TWRP sources
Orangefox Recovery Version R11.1_1-Beta​
NameModifiedOrangeFox-R11.1_1-Beta3/13/2022
🗞 Changelog
Fix BootCTRL
Update OrangeFox sources
Fix vibrator
Enable DT2W in recovery
Update Magisk OrangeFox addon to 24.2
Install instructions​Without TWRP/OrangeFox​
Note: You need a copy of your ROM boot.img
Click to expand...
Click to collapse
This device DOES NOT support fastboot boot twrp.img
Click to expand...
Click to collapse
Reboot your phone into fastboot mode
Download Blank VBmeta and flash it using fastboot flash vbmeta vbmeta.img
Next, download OrangeFox .IMG file and flash it using fastboot flash boot IMAGE_NAME.img
Reboot into recovery mode (fastboot reboot recovery)
When booted into recovery, reflash stock boot.img (Select stock boot.img -> “Flash to: Boot”)
Next, go in Menu -> Flash current OrangeFox and swipe to flash OrangeFox.
Reboot and enjoy!
To get Fox addons working, you need to reflash OrangeFox .zip file
With TWRP/OrangeFox​
Download OrangeFox .ZIP installer and flash in recovery

Nice, it's beta 2
to apply encrypt patch, you must decrypt first.
So
- you have to disable security password/fingerprint in your parameter first.
- then reboot in recovery
- format data
- reboot again to recovery and apply patch.

How to use redmi note 10s unofficial twrp recovery

test (beta 2) after disabling security (fingerprint and pin)
- flashing magisk.zip -> ok
- backup -> ok
- restore -> ok
- MTP internal SD -> ok
- MTP external SD -> nok, file manager stuck on it (win10 or linux mint)

Please full prosses explain and 1 question flash fastboot method

This the link of the Official Tutorial from the Unofficial TWRP Website:
unofficial twrp 3.6.1 Root Redmi Note 10s (rosemary) - unofficial twrp
Download unofficial twrp 3.6.1 root Redmi Note 10s, user who own Redmi Note 10s can root it by following the below instructions
unofficialtwrp.com

Great

miravision said:
Developer WoomyMy has released an unofficial TWRP for rosemary - xiaomi redmi note 10s
Installation Video:
Code:
https://www.mediafire.com/file/f4zcls9sgi3nkoj/352+redmi+note+10s.rar/file
http://www.mediafire.com/file/p3zhivru97bdlke/no-verity-opt-encrypt-6.1.zip/file
Since this is not yet official, only proceed if you are competent enough and brave.
(If you need instructions on how to flash, please do not flash this with fastboot method)
Feel free to discuss any bugs or issues and fixes so that everybody can benefit from our findings.
Click to expand...
Click to collapse
I'm sorry but, do you atleast have the permission to share this?
Also, WommyMy should be the guy to upload it, not you.
Edit: thanks for fixing the thread
Also you're missing the device tree.

Hello. As one of the developpers of this TWRP DT, I am not really OK with that.
Firstly, you linked the wrong device tree Real link here
Also, I didn't published this on XDA because this TWRP is still in BETA. And it contains major bugs, like flashing dynamic partitions in fastbootd. Even if bugs will me fixed, I was planning to wait a release candidate before publishing the release here (this will require even more testing, if people want to help us testing, this will be even better).
So please, can you delete this or add clear warnings about the beta state?
Regards, Woomy

@miravision I think we should also add credits to people like @J6idot , @mastersenpai05 and Myst33d who did a great job helping building twrp.

Woomymy said:
@miravision I think we should also add credits to people like @J6idot , @mastersenpai05 and Myst33d who did a great job helping building twrp.
Click to expand...
Click to collapse
Yes, I believe they should get their work credit.

Will be fix soon.. don't too hurry.

mastersenpai05 said:
Will be fix soon.. don't too hurry.
Click to expand...
Click to collapse
Thanks bro

Keeps restarting when i try to flash a custom ROM from xiaomi eu, any Fix please ?

Wow., Hoping for releasing custom roms for our handsets.,keep up the good work devs

Katho536 said:
Keeps restarting when i try to flash a custom ROM from xiaomi eu, any Fix please ?
Click to expand...
Click to collapse
Xiaomi eu has no support for 10s iirc

No support for Mediatek devices on Xiaomi.eu, Global.rom and other

@miravision can u provide the vbmeta.img file?

Original post updated with attached vbmeta.img
langithitam said:
@miravision can u provide the vbmeta.img file?
Click to expand...
Click to collapse

Hi and thanks for sharing
Is it possible just to boot from TWRP recovery via Fastboot without flashing it on the phone?
I have also a Poco X3 NFC with stock MIUI 12.5 with Magisk root, but with stock recovery (so I can do all OTA updates) where I'm doing the same.
When I need it, I just do
fastboot boot TWRP-file.img
Thanks

Question how to install custom rom in redmi 9 power ???

i have unlocked booloader. i have installed custom recovery pitch black. after that i downloaded custom rom from xda (xtended rom) (evolution x rom) (havoc os rom) miui (12.5 beata rom)
i cleared the folders like dalvik, data,, magisk module, substratum overlays etc
after that i reset data, cache, and dalvik cache
then, format data by writing yes
for evolution x, i chose install option and i select evolution x rom
i slide to the right to start flashing.
after completing mobile stuck into fastboot screen.
none of them worked for me.
for havoc os, i tried the same procedure. this time screen struck on logo redmi (bootloop)
for miui, i tried same procedure and after quarrelling with my mobile, i got success to install it but i had greed so i tried ti nstall evolution x, havoc etc but they get installed but they dont get reboot. either fastboot screen appears or bootloop starts (on-of)
where am i making mistake ?? please help me.

alien2021 said:
i have unlocked booloader. i have installed custom recovery pitch black. after that i downloaded custom rom from xda (xtended rom) (evolution x rom) (havoc os rom) miui (12.5 beata rom)
i cleared the folders like dalvik, data,, magisk module, substratum overlays etc
after that i reset data, cache, and dalvik cache
then, format data by writing yes
for evolution x, i chose install option and i select evolution x rom
i slide to the right to start flashing.
after completing mobile stuck into fastboot screen.
none of them worked for me.
for havoc os, i tried the same procedure. this time screen struck on logo redmi (bootloop)
for miui, i tried same procedure and after quarrelling with my mobile, i got success to install it but i had greed so i tried ti nstall evolution x, havoc etc but they get installed but they dont get reboot. either fastboot screen appears or bootloop starts (on-of)
where am i making mistake ?? please help me.
Click to expand...
Click to collapse
For havoc os, you should flash no oss vendor before havoc rom

I flashed the HavocOS without no oss Vendor on my Redmi 9T and all works perfect. Use no oss vendor only on Poco M3.
FOR JUICE!
1. Reflash the Firmware using MiFlash (From clean all and lock, change it to clean all Only)
2. Boot your device to Fastboot mode and Connect your device again to the PC
3. Download Minimal ADB and Fastboot and Install it, as follow the Instructions.
4. Download the OrangeFOX Recovery, download the Xiaomi.eu Rom, and download your Favourite Custom Rom.
5.Go to the Directory of Minimal ADB and Fastboot ----> C:\Program Files (x86)\Minimal ADB and Fastboot
and paste the recovery.img from the Archive in the Directory of Minimal ADB and Fastboot
6. Launch the Minimal ADB and Fastboot.exe Shotcut from the Desktop and type these commands:
1. Fastboot flash recovery recovery.img
2. If you want to reboot the device Fast type Fastboot reboot
7. Boot the device to the OrangeFOX Recovery, go to the Menu and open the Settings
8. From the Settings select General and uncheck Mount system and vendor read-only
9. Important! To install Successfully the Rom u need first to format the Data, go to Wipe section, select Format Data, type yes and Confirm.
10. Disconnect the Phone, connect it again to the USB and drag the Xiaomi.eu rom zip and the Custom Rom zip to the Phone
11. First u need to Install the Xiaomi.eu Rom zip this is Important!
12. When the flashing of the Xiaomi.eu Rom zip is Complete, u can flash your Favourite Custom Rom
13 Final Step: Format the Data with typing Yes again and Reboot the device, Enjoy!

Atanassoww said:
I flashed the HavocOS without no oss Vendor on my Redmi 9T and all works perfect. Use no oss vendor only on Poco M3.
FOR JUICE!
1. Reflash the Firmware using MiFlash (From clean all and lock, change it to clean all Only)
2. Boot your device to Fastboot mode and Connect your device again to the PC
3. Download Minimal ADB and Fastboot and Install it, as follow the Instructions.
4. Download the OrangeFOX Recovery, download the Xiaomi.eu Rom, and download your Favourite Custom Rom.
5.Go to the Directory of Minimal ADB and Fastboot ----> C:\Program Files (x86)\Minimal ADB and Fastboot
and paste the recovery.img from the Archive in the Directory of Minimal ADB and Fastboot
6. Launch the Minimal ADB and Fastboot.exe Shotcut from the Desktop and type these commands:
1. Fastboot flash recovery recovery.img
2. If you want to reboot the device Fast type Fastboot reboot
7. Boot the device to the OrangeFOX Recovery, go to the Menu and open the Settings
8. From the Settings select General and uncheck Mount system and vendor read-only
9. Important! To install Successfully the Rom u need first to format the Data, go to Wipe section, select Format Data, type yes and Confirm.
10. Disconnect the Phone, connect it again to the USB and drag the Xiaomi.eu rom zip and the Custom Rom zip to the Phone
11. First u need to Install the Xiaomi.eu Rom zip this is Important!
12. When the flashing of the Xiaomi.eu Rom zip is Complete, u can flash your Favourite Custom Rom
13 Final Step: Format the Data with typing Yes again and Reboot the device, Enjoy!
Click to expand...
Click to collapse
Do you get Widevine L1 on havoc os?

Qpb said:
Do you get Widevine L1 on havoc os?
Click to expand...
Click to collapse
Yes don't worry about this. Everything works!

Atanassoww said:
I flashed the HavocOS without no oss Vendor on my Redmi 9T and all works perfect. Use no oss vendor only on Poco M3.
FOR JUICE!
1. Reflash the Firmware using MiFlash (From clean all and lock, change it to clean all Only)
2. Boot your device to Fastboot mode and Connect your device again to the PC
3. Download Minimal ADB and Fastboot and Install it, as follow the Instructions.
4. Download the OrangeFOX Recovery, download the Xiaomi.eu Rom, and download your Favourite Custom Rom.
5.Go to the Directory of Minimal ADB and Fastboot ----> C:\Program Files (x86)\Minimal ADB and Fastboot
and paste the recovery.img from the Archive in the Directory of Minimal ADB and Fastboot
6. Launch the Minimal ADB and Fastboot.exe Shotcut from the Desktop and type these commands:
1. Fastboot flash recovery recovery.img
2. If you want to reboot the device Fast type Fastboot reboot
7. Boot the device to the OrangeFOX Recovery, go to the Menu and open the Settings
8. From the Settings select General and uncheck Mount system and vendor read-only
9. Important! To install Successfully the Rom u need first to format the Data, go to Wipe section, select Format Data, type yes and Confirm.
10. Disconnect the Phone, connect it again to the USB and drag the Xiaomi.eu rom zip and the Custom Rom zip to the Phone
11. First u need to Install the Xiaomi.eu Rom zip this is Important!
12. When the flashing of the Xiaomi.eu Rom zip is Complete, u can flash your Favourite Custom Rom
13 Final Step: Format the Data with typing Yes again and Reboot the device, Enjoy!
Click to expand...
Click to collapse
Which did you flash? Eu stable or weekly beta?

Qpb said:
Which did you flash? Eu stable or weekly beta?
Click to expand...
Click to collapse
There is no EU version of Xiaomi.eu for Redmi 9T. There are only Chinese based, Weekly and Stable with gapps. Blame Xiaomi for that..

Atanassoww said:
There is no EU version of Xiaomi.eu for Redmi 9T. There are only Chinese based, Weekly and Stable with gapps. Blame Xiaomi for that..
Click to expand...
Click to collapse
By EU I mean Xiaomi.eu rom

Qpb said:
By EU I mean Xiaomi.eu rom
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Only Poco M3 have Global

Atanassoww said:
View attachment 5472137
Only Poco M3 have Global
Click to expand...
Click to collapse
Yeah I mean China rom without ads, bloatware, and more languages

Qpb said:
Yeah I mean China rom without ads, bloatware, and more languages
Click to expand...
Click to collapse
Of Course!