Database Develop

bricked my Mi 8

Hey guys I've run into an issuei bought a Mi 8 off swappa two weeks ago I've been using it and it's been absolutely amazing I love it but a few days ago global miui 9 came out and they phone came bootloader unlocked so I figured I'd flash the firmware and then lock the bootloader I flashed the firmware through Miuitool it worked fine I set it up and then went to lock the bootloader using the same tool I did it and then it started to boot but detected no os anymore so it was bootlooping. I can only access the recovery and fastboot mode I tried wiping didn't work I tried flash the firmware using miflash tool and manually doing the commands also tried getting into edl mode but says it's locked. I tried calling support but they told me they didn't do phone repairs and to call the manufacturer of which I bought it from (swappa) I'm kinda losing hope I'm not sure what to do I've tried so much maybe I'm missing something. If anyone has any suggestions I would love that thanks and here's what my recovery says if that helps

Did you try to flash twrp with fastboot and then from twrp flash the new rom?

xristos9 said:
Did you try to flash twrp with fastboot and then from twrp flash the new rom?
Click to expand...
Click to collapse
I did not but I doubt I could because the bootloader is locked

Had you try flashing it with Deep Flash Cable?
http://en.miui.com/thread-1597002-1-1.html
Mi 8 Fastboot ROM can be downloaded here:
https://forum.xda-developers.com/mi-8/development/firmware-global-china-stock-firmware-t3818194
Disclaimer: I had not tested this method but shared from the internet. The IP of the method is from the link shared above and I hold no responsibility in any event it cause damage to your phone.

To resurrect the phone, you will need a MI account with authorized access to the EDL. Look at the topic of Redmi 5 as they resurrect bricks. On our forum, several MI 8 & MI 8 SE have already been resurrected in this way.
Instructions (RU)

dogsly said:
To resurrect the phone, you will need a MI account with authorized access to the EDL. Look at the topic of Redmi 5 as they resurrect bricks. On our forum, several MI 8 & MI 8 SE have already been resurrected in this way.
Instructions (RU)
Click to expand...
Click to collapse
I can not register in your forum, could you give us the contact of the people taht can give us account EDL permissions?
BR

thanks for the suggestions guys I was thinking before getting super technical opening up my phone and modding a cable to let you guys know of an update. Last night I stayed up a while i found adb flash tool for recovery mode to flash back to official software (http://www.xiaomitool.com/adb) I downloaded both global and both china otas of stable and beta. First i flashed global successfully but forgot that going from china to global requires unlock boot loader to boot up so it did not boot next I tried china stable but the file is an older version and did not flash since it was "downgrading" and last I tried china beta which was newer in theory but did not flash since it was not stable. So i am going to wait for a new china stable rom to come out whenever it does because in theory it will flash correctly and completely fix the phone because its china miui thats newer than the one global version now i can only wonder if it can flash because i will be going from global to china but again I will let you guys know when i attempt it, I understand I will be waiting a while for a stable version those dont come often but in the meantime i can focus on other things and thankfully i have multiple back up phones. thanks guys

StarwarsMissionary said:
I tried china stable but the file is an older version and did not flash since it was "downgrading"
Click to expand...
Click to collapse
Theoretically and my previous experience with Nexus phone, older version of official ROM should be fine as it should get OTA to latest version. So, I think it is worth a try.
At the same time, I'm still patiently waiting for my 1st Mi 8 to arrive at door step.

ZhenMing said:
Theoretically and my previous experience with Nexus phone, older version of official ROM should be fine as it should get OTA to latest version. So, I think it is worth a try.
At the same time, I'm still patiently waiting for my 1st Mi 8 to arrive at door step.
Click to expand...
Click to collapse
I agree with you and I used to own a nexus too so I understand what your saying but I tried flashing miui 9 china stable and the error said it was an older version and it was "illegal to downgrade" which is weird so I'll just wait for an updated version which might take a while

Never lock a boatloader with aftermarket global on a China Xiaomi.
I think because of the flashing the bootloader is locked again, maybe try to unlock it with miui unlock.
Maby Xiaomi enable the anti roll back also for the Mi 8 after they did it to the Xiaomi redmi note 5 whyred? Many people have ended up with bricked phones.
Edit
Same problem solution is unlock boatloader
https://xiaomi.eu/community/threads/mi-8-safetynet-android-pay-and-related-issues.45286/

I faced the same problem with my Mi 8 when I locked the bootloader after installing Global ROM. Simply put your phone in Fastboot, and again Unlock the Bootloader using Xiaomi official Unlock tool. Once bootloader was unlocked, phone booted normally with Global ROM.

Hello, I have blocked bootloader and now I am with the bootloader loop.
I've tried to unlock again from console and from the Xiaomi tool, but it has not been possible. The tool says that the device is not associated. Any solution to this?
I have also tried from Recovery (With MiFlash) to put the stable Chinese version, but having a higher version installed does not leave me.
If I re-flash the same version, it completes it but when restarting, the loop returns.
Any solution?

Hi I have the same problem but now I have a new and BIG new problem...
When I try to unlock the bootloader with my account the software said me that my account is not bounded in this device... cry cry cry!!!
Somebody knows if it is normal and if I will fixed?
BR

The mi unlock tool problems are mainly because of either it's not verified with your account or because before it bricked you forgot to go to development settings and add your phone for unlock which I forgot to so whenever I try to unlock it again it says it isn't verified because I'm a moron and forgot to add my Mi8 to my account in case something like this happened, now I gotta wait for a stable newer miui 9 China version to flash from the adb software

Any news on how to solve the brick?
The perfect solution would be to have access to an account with EDL permissions to re-unlock the bootloader.
Enviado desde mi SM-G930F mediante Tapatalk

StarwarsMissionary said:
The mi unlock tool problems are mainly because of either it's not verified with your account or because before it bricked you forgot to go to development settings and add your phone for unlock which I forgot to so whenever I try to unlock it again it says it isn't verified because I'm a moron and forgot to add my Mi8 to my account in case something like this happened, now I gotta wait for a stable newer miui 9 China version to flash from the adb software
Click to expand...
Click to collapse
When you have any update on this, please let me know I have the same issue and did same mistake.
Let me know if you were able to un-brick it.
Looking fwd to see an update from you.

This. Is. F****d. Up. Someone needs to say it. They do totally crazy things and we saw too many bricks coming from their unexplained tinkering with ARB and locking. Additionally, their each new flagship gets always one step closer to the prices of better competition. We are getting too screwed and we desperately need a new, reasonably priced and logical brand. Nokia? Wouldn't say so. Essential? US only and seems to close down. OnePlus? Getting costlier. Google? Got really costly. **** happened. Really, sorry for OT, but my empathy and sociological thinking just hurts me when I see this.

j1505243 said:
This. Is. F****d. Up. Someone needs to say it. They do totally crazy things and we saw too many bricks coming from their unexplained tinkering with ARB and locking. Additionally, their each new flagship gets always one step closer to the prices of better competition. We are getting too screwed and we desperately need a new, reasonably priced and logical brand. Nokia? Wouldn't say so. Essential? US only and seems to close down. OnePlus? Getting costlier. Google? Got really costly. **** happened. Really, sorry for OT, but my empathy and sociological thinking just hurts me when I see this.
Click to expand...
Click to collapse
Yeah, I thought I was the only one thinking like this.
Companies want as much money as possible. Oneplus is increasing prices not because the components cost more but because they waste money on ads and want more profit. And they pull it off because people will still buy their phones.
Honestly, the Mi 8 is a " flagship killer-killer",it provides almost the same stuff as the OP6 for less money but people either never heard of Xiaomi or are hesitant when it comes to buying their phones ( I don't understand why, though ) .
As for their phones dying, I only saw bricks from people who tried tinkering with deep level stuff without actually knowing what they were playing with.
They don't suddenly die/lose basic functions out of the blue like e.g. Moto phones and I don't know of a single device which beats them at this price along with what you get in a phone.

The Marionette said:
I only saw bricks from people who tried tinkering with deep level stuff without actually knowing what they were playing with.
Click to expand...
Click to collapse
Just let me tell that you can do the **** even actually knowing what you are playing with. You just need to forget to change the "clean all and lock" option which comes selected by default. And believe me, it's not that difficult at 3 a.m. after some successful flashes.
I think it's not necessary to dive into the hurt, you know.
Cheers

descarao81 said:
Just let me tell that you can do the **** even actually knowing what you are playing with. You just need to forget to change the "clean all and lock" option which comes selected by default. And believe me, it's not that difficult at 3 a.m. after some successful flashes.
I think it's not necessary to dive into the hurt, you know.
Cheers
Click to expand...
Click to collapse
There is a need for that. This is an expensive toy and you shouldn't be playing with it if you are not 100% that you can undo the thing you will do if it goes wrong ( you are free to do it but then at least try to find a solution yourself ) .
After seeing posts which are pretty much like " uwu I made a f*cking boo boo, a weal f*cky wucky, pweese help me guys ;((((( " ( which could've been avoided by following some logic or by actually investigating before flashing stuff ) , it's high time people who are thinking about unlocking the bootloader actually see what they might be getting into if they "touch wrong things in the wrong way".

How to unbrick Red Magic 3

This is the link to the developers unbricking tool
https://forum.xda-developers.com/red-magic-3/how-to/tool-nubia-red-magic-3-unbirck-tool-t3965044
Sorry technical issues copying link lol.

They told you a hundred times, and you couldn't follow simple instructions.
Enjoy your grease, Einstein.

Sir i have the same thing. Im using rm3 when i bought this its already flash on global rom. So im curious because its box is Chinese text but it's global rom so i flash to china rom and its success but suddenly i figure it out that chinarom doesn't have google so i flash again to global rom then suddenly it corrupt after the flash. I tried those method like that unbrick tool non.eu i follow the steps very well but when it comes to the part that cmd will pop 'downloading port 4'
It says that faile and un identified and it says that please check your status or what. I'm humble asking for your help because this is my only phone and i need this for my online school

johnbrinan1 said:
Sir i have the same thing. Im using rm3 when i bought this its already flash on global rom. So im curious because its box is Chinese text but it's global rom so i flash to china rom and its success but suddenly i figure it out that chinarom doesn't have google so i flash again to global rom then suddenly it corrupt after the flash. I tried those method like that unbrick tool non.eu i follow the steps very well but when it comes to the part that cmd will pop 'downloading port 4'
It says that faile and un identified and it says that please check your status or what. I'm humble asking for your help because this is my only phone and i need this for my online school
Click to expand...
Click to collapse
Look buddy I'm sorry this happened to you. Part of the reason I gave this cell away when I unbricked it was that the very first te it bricked it was bricked 120 days. Is all I can suggest is that you try not to panic an possibly delete system. It's similar to format data. Then try an make a clean start with the unbricking tool. My ex still uses it every day with zero probs an I think it may be an EU rom. These cells are natouriously difficult to customise. I hope you unbrick it soon. An I am sorry there are so many unsympathetic people on XDA who would rather say how ignorant or dumb you are than try an help. I refuse to be like that now. I am just a humble forklift driver. We cannot all be computer experts or write code or roms for cellphones.
Take your time an try an erase the cell in case something you are trying to hold onto is preventing unbricking?
I lost everything on my cell an only had it 2 days when it happened to me. You may lose your data. But erasing might help the unbrick tool work
Good luck. An breathe ok

Bryceicle1971 said:
Look buddy I'm sorry this happened to you. Part of the reason I gave this cell away when I unbricked it was that the very first te it bricked it was bricked 120 days. Is all I can suggest is that you try not to panic an possibly delete system. It's similar to format data. Then try an make a clean start with the unbricking tool. My ex still uses it every day with zero probs an I think it may be an EU rom. These cells are natouriously difficult to customise. I hope you unbrick it soon. An I am sorry there are so many unsympathetic people on XDA who would rather say how ignorant or dumb you are than try an help. I refuse to be like that now. I am just a humble forklift driver. We cannot all be computer experts or write code or roms for cellphones.
Take your time an try an erase the cell in case something you are trying to hold onto is preventing unbricking?
I lost everything on my cell an only had it 2 days when it happened to me. You may lose your data. But erasing might help the unbrick tool work
Good luck. An breathe ok
Click to expand...
Click to collapse
Bhai mera bhi crupt ho gaya same problem bro

nice

اين ملف التحميل

Google Pixel 4 EDL files

Hi everyone,
So, anyone know where I can download the phone image and bootloader to use on the QPST tool?
If anyone downloaded this files in the past, and are from a free Pixel 4, please share it with me as I need them to my Pixel 4.
I already downloaded the firmware from google, but the files from there don't seem to be compatible with QPST, as it requieres apparently, some qualcomm files with .hex or .mbn.
Also, does anyone know for what you can use the tab "Multi-image", as that is the only tab that will accept ISO files, which you will find inside the firmware you can download directly from google.
Thanks in advance!

¡Qué lástima!

v12xke said:
¡Qué lástima!
Click to expand...
Click to collapse
?

Here is the firehose for the pixel 4. I do not have a backup though.

r1pp3d2 said:
Here is the firehose for the pixel 4. I do not have a backup though.
Click to expand...
Click to collapse
My god reaaaaaally thanks!!!!
I was searching for this file for months and had no luck, really apreciete it!

#mcl said:
My god reaaaaaally thanks!!!!
I was searching for this file for months and had no luck, really apreciete it!
Click to expand...
Click to collapse
Hope to have a tutorial to downgrade rom for pixel 4xl lock oem from you soon

Ut Sau Doi said:
Hope to have a tutorial to downgrade rom for pixel 4xl lock oem from you soon
Click to expand...
Click to collapse
Working hard on that, hope I can get a guide on summer!!!

r1pp3d2 said:
Here is the firehose for the pixel 4. I do not have a backup though.
Click to expand...
Click to collapse
Hi. Those firehose don't seem to be for the pixel 4 at all. They look like they're from xiaome. I've tried using them but no response from the phone.

#mcl said:
My god reaaaaaally thanks!!!!
I was searching for this file for months and had no luck, really apreciete it!
Click to expand...
Click to collapse
Hello, my favorite pixel 4 refused to live last night and became defined as QDloader... not responding to anything at all.
I was up most of the night trying to revive my phone and I came across this thread.
So what should I do with the .elf file? QPST does not see this file.
Sorry to be rude, but you can help with this problem.
PS sorry for google translate, i don't speak english

PierreDunn said:
Hello, my favorite pixel 4 refused to live last night and became defined as QDloader... not responding to anything at all.
I was up most of the night trying to revive my phone and I came across this thread.
So what should I do with the .elf file? QPST does not see this file.
Sorry to be rude, but you can help with this problem.
PS sorry for google translate, i don't speak english
Click to expand...
Click to collapse
Hey!
I am very busy to fully help you but as far as I know, when Pixel is "dead" it enters EDL mode. When you are there there is an app called QPST(Oficial from Qualcomm, though there are a lot of third-parties ones with different functionality). Over there you can go to the Download mode and load the file shared over here.
Here is a link to a thread I created where I explain this in detail and another thread about EDL mode:
First we are trying to use it to unlock the bootloader of a locked device, by flashing free-firmware
Second for people talking about EDL and some useful stuff
I think with this you may come up with an idea to fix your Pixel!
Let me know how it goes and if you need further help please contact me and I will try to help!
Also, don't worry your English is more than enough for us to understand you!

#mcl said:
Hey!
I am very busy to fully help you but as far as I know, when Pixel is "dead" it enters EDL mode. When you are there there is an app called QPST(Oficial from Qualcomm, though there are a lot of third-parties ones with different functionality). Over there you can go to the Download mode and load the file shared over here.
Here is a link to a thread I created where I explain this in detail and another thread about EDL mode:
First we are trying to use it to unlock the bootloader of a locked device, by flashing free-firmware
Second for people talking about EDL and some useful stuff
I think with this you may come up with an idea to fix your Pixel!
Let me know how it goes and if you need further help please contact me and I will try to help!
Also, don't worry your English is more than enough for us to understand you!
Click to expand...
Click to collapse
I'm trying to revive my phone with QFIL but I'm missing the rawprogram0.xml and patch0.xml files.
As I understand it, you can make them yourself (I have already studied the instructions), but this requires gpt.bin, which I don’t have either

What should I do? elf extension doesn't fit anywhere

#mcl said:
Hey!
I am very busy to fully help you but as far as I know, when Pixel is "dead" it enters EDL mode. When you are there there is an app called QPST(Oficial from Qualcomm, though there are a lot of third-parties ones with different functionality). Over there you can go to the Download mode and load the file shared over here.
Here is a link to a thread I created where I explain this in detail and another thread about EDL mode:
First we are trying to use it to unlock the bootloader of a locked device, by flashing free-firmware
Second for people talking about EDL and some useful stuff
I think with this you may come up with an idea to fix your Pixel!
Let me know how it goes and if you need further help please contact me and I will try to help!
Also, don't worry your English is more than enough for us to understand you!
Click to expand...
Click to collapse
I tried to install mbn file but that doesn't work either

How is bootloader state protected against physical tampering in Google Pixel
A week ago my professor's Pixel 4 XL was stolen from his desk when he left it there for charging. The phone has been shut down. It had few minutes of battery left when it was plugged in charging. T...
android.stackexchange.com

Unlock carrier locked bootloader Pixel [BETA]

UPDATE AS OF 16 OF MAY 2023
This project isn't working right now, but I am still working on it.
However due the complicated nature of the projects and the fact that I have little free time means this project will probably still take time to get to functional state.
If anyone has any idea please contact me, any hell is welcome!
______________________________________________________
Hi!
So I decided I wanted to flash custom software into my phone, but it's bootloader was locked so I figure a way to unlock it!
I am going to leave 2 methods:
1. It's the most risky but has more chance of working. The idea is to flash the whole firmware again to the phone, but from an unlocked model.
This is posible using the EDL mode and Sahara protocol.
The EDL mode is an emergency mode which allows user to flash firmware in case fastboot and ADB fails. It's also available in all Qualcomm devices.
It is also completly independent from the rest of the phone, and it's the first bootloader we have. If everything is ok it triggers the second bootloader(fastboot) which then boots the system(See the diagram if you want).
As we want to reflash the firmware keep in mind this could brick your phone and I won't take any resposability if it happen
Materials:
-QPST
-Qualcomm Driver
-Working USB Cable
-Fastboot and ADB set up and working
-knoledge on using ADB
Procedure:
1. Download and install Qualcomm drivers
2. Download and install QPST
4.Downlaod the MBN file
3. Reboot
4. Connect the phone to the PC, then open cmd and run "adb reboot edl".
If you are on fastboot mode, then try "fastboot oem edl", "fastboot reboot-edl", "fastboot reboot edl". One of this should work
5. Go to C:\Program Files\Qualcomm\QPST\bin\
6.Open QPST Config(it's a blue phone, see picture)
7. Click on "Start clients" and then "Software download". A new window should open
8. Now we need to select the phone image using the browser button
9. Click on start to flash ⚡️
Please be aware the method wasn't tested, so this could brick your phone.
If you decide to try it, and have questions or ru into problems during the process, please let me know.
Also remember to take a backup of your data, as it is goig to be lost. ℹ
____________________________________________________________________________
As for the second method, I tried it and it didn't work for me, but is completly safe so you may want to give it a try.
1. Enrrol on the android 12 beta program, AND MAKE A BACKUP OF YOUR DATA
2. Install the update
3. Now exit from the beta program
4. Now you should have an update, it's a rollback to the stable version of android 12. After you installed the update the phone will restart and factory reset.
5. Do the setup as normal
In the end you may have unlocked the bootloader, to check just go to developer options and check if it is enabled or not.

Can we get a video of how to do this?

trzpro said:
View attachment 5491701
Click to expand...
Click to collapse
So you attempted one of these methods and did it work or not work.What device did you use?

trzpro said:
View attachment 5491701
Click to expand...
Click to collapse
That seems to be a probelm with the drivers. Did you install everything properly?
You may want to uninstall them and reinstall again to see if we solve the problem. Also try to run the app with admin privileges
Let me know how if you have more issues or if this doesn;t solve the problem at all.

AtrixHDMan said:
Can we get a video of how to do this?
Click to expand...
Click to collapse
I can make a video, but I can only publish it on January. Untill then I think the guide is easy to understand so if you want to try the method you shouldn't have problems.

#mcl said:
I can make a video, but I can only publish it on January. Untill then I think the guide is easy to understand so if you want to try the method you shouldn't have problems.
Click to expand...
Click to collapse
I understand thanks

#mcl said:
这似乎是驱动程序的问题。您是否正确安装了所有内容？
您可能需要卸载它们并重新安装，看看我们是否能解决问题。还尝试以管理员权限运行该应用程序
如果您有更多问题，或者这根本无法解决问题，请告诉我
MOD EDIT: You may need to uninstall them and reinstall to see if we can fix the problem. Also tried running the app with admin rights
Let me know if you have more questions, or if this doesn't solve the problem at all.
Click to expand...
Click to collapse
同样的问题，无法解决。
MOD Edit: Same problem, can't solve it.

Looks like this is a common issue, I will look the documentation of QPST and see if I see the cause of the problem. Thank you guys for helping up this project

So I found that that version of QPST is outdated(it's the 2.7 build 140 and the latest version is 2.7 build 460). I am leaving a zip with it here.
Try and see if this time around we manage to unlock the bootloader

MOD EDIT:
This is the latest version
这是最新版本

#mcl, I have the same problem as you have, I live in Portugal and bought a used Pixel 4 but apparently it's origin is the US, Verizon. From your original post I take it that you didn't try this method yourself and hope others will try? Or were you successful?

for anyone in the same situation, read this thread: https://android.stackexchange.com/q...ed-against-physical-tampering-in-google-pixel
My guess is: if your pixel's " OEM unlocking " is greyed out it will not be possible to unlock. Although I didn't try the EDL route I'm quit sure that at some point you will get a message "bootloader is locked"

gentle_giant said:
for anyone in the same situation, read this thread: https://android.stackexchange.com/q...ed-against-physical-tampering-in-google-pixel
My guess is: if your pixel's " OEM unlocking " is greyed out it will not be possible to unlock. Although I didn't try the EDL route I'm quit sure that at some point you will get a message "bootloader is locked"
Click to expand...
Click to collapse
Hey I am quite busy recently so I haven't really had time to look more on the thread, though I believe there will always be a way, it may be hard to find but no OS is perfect, and Android is no exception. As it turns out, even if this method worked, when it connect to the internet there will be a high chance that using the IMEI of the phone it will "remember" it's a locked model and won't allow you to flash new firmware.
However I am working on a new method, which is also safer, though I have still work to do, so when It is ready I am going to publish another guide.
Good luck all untill them

Hi mcl, my problem is: I do like to change OS and I did so on my previous HTC M7 and M10. And these 2 phones still function with PixelExperience 10 or 11.
But at best I'm a simple layman with a lot of enthusiasm.
Anyway, I will keep an eye on this thread and hopefully you will find time to make this new method work!
By the way, I see that we are "neighbors", I live in Portugal.

gentle_giant said:
Hi mcl, my problem is: I do like to change OS and I did so on my previous HTC M7 and M10. And these 2 phones still function with PixelExperience 10 or 11.
But at best I'm a simple layman with a lot of enthusiasm.
Anyway, I will keep an eye on this thread and hopefully you will find time to make this new method work!
By the way, I see that we are "neighbors", I live in Portugal.
Click to expand...
Click to collapse
Hahah yeah we are definitely neighbors.
Well I do want to become a software engineer though right now I am just a busy enthusiastic.
I also really enjoy custom OS, when I had my Galaxy S9 I used to have custom ROMs.
Hope I manage to find a new solution as soon as posible for all if you guys!!!

How is bootloader state protected against physical tampering in Google Pixel
A week ago my professor's Pixel 4 XL was stolen from his desk when he left it there for charging. The phone has been shut down. It had few minutes of battery left when it was plugged in charging. T...
android.stackexchange.com

any luck with that? can I backup my firmware before doing it?

darknmy said:
How is bootloader state protected against physical tampering in Google Pixel
A week ago my professor's Pixel 4 XL was stolen from his desk when he left it there for charging. The phone has been shut down. It had few minutes of battery left when it was plugged in charging. T...
android.stackexchange.com
Click to expand...
Click to collapse
We are not doing physical atack, so that is not a problem for us.
Also, I don't believe the pixel 4 XL is perfect, for sure there are errors and security vulnerabilities. We just need to find them.

Question Need help Mi11 "your System has been Destroyed" Messeage

Hello everyone, im new to this Forum.
I need to ask if someone can help me. I remember using the cleaning Tool on my Mi11 on the Bus and seconds after closing the App the Phone suddenly Turned off & after Turning it back on it just displayed the Message
"your System has been destroyed" and constantly bootlooping.
Recovery Mode was not working, i can only get into fastboot Mode.
I tried flashing new Firmware with the tools provided by Xiaomi but they always tell me to unlock the bootloader wich i havent done and now i cant cause i cant get into the Phone.
I also tried unlocking the Bootloader with MiFlash Unlock but it tells me to add my account in the MIUI Developer Options..
I then contacted some Xiaomi unlocking Service and pay him 30€ to unlock my Phone in a teamviewer Session via AvatarAuthTool and some other stuff but even he was not able to do it.
I removed the backplate from the Phone and shortened the testpoint pins and he tried again with no luck..
i have no Idea how to get this Phone usable again and im desperatly looking for any help or advice bcuz im currently rocking my old Sony Erricson Walkman Phone..
thanks in advance for anyone who is taking the time to read all this and trying to help

You didn't mention if it's still on warranty and whether you can get it repaired from there?
You don't need to unlock the bootloader if you're using the right firmware for your variant.
Do you happen to remember whether it was EEA, MI, IN or etc version for your device?

Unknown.Guy said:
You didn't mention if it's still on warranty and whether you can get it repaired from there?
You don't need to unlock the bootloader if you're using the right firmware for your variant.
Do you happen to remember whether it was EEA, MI, IN or etc version for your device?
Click to expand...
Click to collapse
I dont think i still have warranty cause i bought it as used from a friend, How do i find the correct Firmware as you say i dont need to unlock anything i might have tried with the wrong version. Also i believe its a global version.

Coolpenisbro said:
I dont think i still have warranty cause i bought it as used from a friend, How do i find the correct Firmware as you say i dont need to unlock anything i might have tried with the wrong version. Also i believe its a global version.
Click to expand...
Click to collapse
No worries. You will have to try a couple of fastboot firmwares.
For each of them, you need to use the latest MiFlash Tool and make sure that CLEAN ALL only option is selected.
One thing to note here is that once you select the firmware folder in MiFlash, it automatically switches to Clean All and Lock
So you better make sure to look well and switch to CLEAN ALL only again before you hit the Flash button.
Latest Global:
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Latest Global EEA:
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Not so latest China Stable:
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
I couldn't find the latest fastboot version for China. Make sure you download fastboot versions for all of these and try one by one. At least one of these have to work for your bootloader.
If these don't work then we could try Indonesia, Turkey, Taiwan and Russia firmwares. No way none of them works.
Edit: Idk how it selected Bold but nvm. Also, these steps will wipe all data on phone. Will be like a factory reset.

Give this a try first, who knows it might work lol.
How to Fix “The System Has Been Destroyed” Issue on Xiaomi Phones - Techtrickz
Xiaomi smartphones usually work flawlessly, but sometimes it may act weirdly. An OTA update can cause the issue and sometimes it happened without any intervention by users. OTA updates sometimes will brick the phone leaving the message ‘the system has been destroyed’ on the boot screen. For...
techtrickz.com

Unknown.Guy said:
Give this a try first, who knows it might work lol.
How to Fix “The System Has Been Destroyed” Issue on Xiaomi Phones - Techtrickz
Xiaomi smartphones usually work flawlessly, but sometimes it may act weirdly. An OTA update can cause the issue and sometimes it happened without any intervention by users. OTA updates sometimes will brick the phone leaving the message ‘the system has been destroyed’ on the boot screen. For...
techtrickz.com
Click to expand...
Click to collapse
Dude thanks for your efforts in trying to Help. In the end i refunded my Money wich i paid to the first unlocking guy and looked on Telegram, where i found a 100% legit dude. he flashed it on first try. also he was ok with an afterwards payment + he was only 25€. I can link his page if someone is interested.