Hey guys.
I'm facing the following problem. Whenever a I plug my 12 Pro on the USB (2.0 or 3.0, doesnt matter) on windows 10, I hear the phone connecting, and then disconnecting, the windows file explorer showing the phone storage content pops up, and the closes, the phone disconnects, and connects again, and on and on and on and on.
I have already deleted all my drivers, reinstalled everything, updated windows but nothing worked. Also, have changed all the power options of USB ports. I've tested different ports, different cables, but got nothing. My old Pixel 3XL works perfectly with the same cable and ports.
I'm currently running EU 13.0.30.
*Edit: It happens with any data transfer mode. If I keep the option "no data transfer" on, I can hear the sound of the usb connection, and it charges normally without looping.
Is there any fix for that?
Try to put a USB hub between the PC and the device.
The obvious solution is to keep it on "no data transfer".
You can still use ADB. You can still use AdbSync.exe (in my sig).
That's what I use and I never play with MTP or PTP or UMS.
Related
I seem to be having a very annoying problem with my Galaxy S when i attempt to use it as "PC Internet" when i plug it in via USB Port.
I plug it in via USB and select PC Internet but after random times its as if i unplugged it and re plugged it back in. I hear the windows sound that you get when you unplug a USB device. So basically for some reason i cannot seem to maintain a connection through USB. Sometimes it works for 10 minutes, sometimes it works for 1 minute ect.
I have tried to set my usb's power save feature off and still getting an issue with it. I have also tried uninstalling and reinstalling the drivers to no success.
Not sure if this could be the problem but im running windows 7 64 bit. Hoping that its not a 64bit related issue.
Any help or suggestions would be appreciated.
thx.
forgot to mention im running the stock 2.1 update 1 on the bell version of the phone.
I am having a bit of a strange problem with connecting and/or mounting my N1 to my computer (or any other computer for that matter).
i keep getting "USB Device not recognized" messages when i plug it in, and the phone shows no sign of being connected except being charged, the usb mount or debug notifications dont pop up. and i keep hearing the usb disconnect and connect sounds from the computer over and over.
also, i tried mounting in recovery mode but that did not seem to work either.
any ideas?
Sounds like either your usb connector on the phone is jacked up, or the cable. Have you tried with a different cable?
Tried another cable, both seem to be not working.
Are you on a custom ROM cause this doesn't sound quite right your the computer should still detect the phone or at least the debugger on the phone should detect the computer. Do you have the drivers for the phone on your computer? Does the phone recognize that it is connected in fastboot?
i am running miui however i dont think that's the problem because as i said, even when in recovery mode the pc doesnt recognize it, when running adb devices i dont see the phone.
also the "USB device not recognized" message in windows keeps popping up over and over like it keeps trying to connect evry second.
by the way i managed to get it to work for a few seconds here and there but overall its not working, i think this suggest it might actually be a hardware problem.
bummer.
Your right it might be a hardware problem but if I were you I would still try wipe and maybe reflash the ROM or restore a nandroid backup from when it worked.
I went into menu -> settings -> connectivity, and set the USB connection to "Always Ask" when connecting to a computer so that it would ask me if I want to use Charging/Mass Storage/Media Sync/etc. Even with that box checked, no matter what I do, when I connect the phone to my computer, it does NOT ask me what USB connection mode to use. Can anyone else confirm whether or not they experience this problem?
Thanks!
SOLVED - driver conflict with my Samsung Epic. Connecting one then the other wreaks all sorts of havoc.
call Verizon or LG for that support..OR try your control panel windows settings..devices
pissinguoff247 said:
I went into menu -> settings -> connectivity, and set the USB connection to "Always Ask" when connecting to a computer so that it would ask me if I want to use Charging/Mass Storage/Media Sync/etc. Even with that box checked, no matter what I do, when I connect the phone to my computer, it does NOT ask me what USB connection mode to use. Can anyone else confirm whether or not they experience this problem?
Thanks!
Click to expand...
Click to collapse
Is the little USB symbol showing up in the notification bar?
If not...try a different USB port on the computer.
Sounds dumb, i know...but it worked for me today when I had the same problem. And I think I recall it working on my old Incredible.
SOLVED
SOLVED - driver conflict with my Samsung Epic. Connecting one then the other wreaks all sorts of havoc, between mass storage mode and whatnot. When I switch the LG from charge to mass storage and back on the fly, it's doing something to the samsung drivers. When i reconnected my samsung, then the LG again, things went cuckoo for cocoa puffs until I rebooted.
I can't post a new topic as I have less then ten posts but I have an issue with my connectivity as well. When unplugged the phone still shows the USB icon in the top left corner like it is plugged in. However when plugged in the phone will charge but when connected to a computer mass storage mode will not work or show up. I have tried it in windows xp/ osx on my MacBook. Windows 7 on my desktop and nothing. The drivers are good as it was working before. I have done a wipe/data, restored back to cubed 1.1 mod and it is still doing it. It doesn't bug me that bad as I use andftp to move my apostle back and forth from my NAS to sdcard. But I would like it fixed as trying to put music or ISO's for my psx emulator can take a minute over the wifi. Any help would be appreciated.
Sent from my VS910 4G using Tapatalk
Why am i getting a Factory data cable connected and i cannot switch between usb modes?
For some reason, out of nowhere, my computer or phone are deciding not to connect to each other, which it was working fine last night and hundreds of times before that on the same laptop, suddenly when i plug my phone in now it says drives failed to install, and so i downloaded that latest LG Android Device Drivers, and still wont work. Any thoughts on how to fix this ?
Do you get the USB connection icon on your phone? If so, this shouldn't be that hard to fix. It's probably just a driver issue. I would uninstall the LG and Android drivers and start over. Now, if you don't get the USB icon on your phone at all, then you either have a bad USB cable or SD card. I had this problem for months before I figured out it was my USB cable that was the problem.
If driver issue with Windows, uninstall drivers, reboot, install drivers, reboot, after Windows loads then plug in the phone, then try everything starting with Charge Only, then Mass Storage, then Internet Connection Mode, and all the drivers should install fine
If this fails you can try ADB over Wifi in the Play Store. It bypasses a lot of issues if you are just trying to use adb on your phone. If you need files off your phone try Wifi File Transfer. No wires or cables needed. Both just need an existing Wifi network to transfer/push/pull files.
Hi guys, so I have a little bit of an issue! I've had my nexus 6 for about 3 months and i'm not sure when it happened or why but some how and some way no matter what rom I'm running, USB connection to desktop no longer works. I have tried turning adb on and off, reloaded drivers, and tried other computers. When I monitor device manager in Windows 10 no new devices are connected at all, just does not show up. No unknown device, adb, USB, nothing. So I'm not sure what I should do, I was thinking of claiming warranty however trying to avoid it. Any suggestions??????
P.S: Mounting external storage devices using otg is successful.
May there be some problem with your cable. Try different cable on all available usb port.
I've done that, no success