hello
i have a poco m3 pro 5g miui 13.0.1 global version i unlocked the bootloader using the official tool
after that i tried to flash the miui 12.5 global version using miflash everything went well
but after my phone rebooted it was stuck on fastboot mode when i reboot it again it boot to fastboot mode
i tried wiping data using recovery mode
i tried rebooting using recovery mode
and i tried safe boot
nothing worked it always boot to fastboot mode
can anyone help me please
tetou said:
olá
eu tenho um poco m3 pro 5g miui 13.0.1 global version desbloqueei o bootloader usando uma ferramenta oficial
disso eu tentei fazer o flash da versão global do miui 12.5 usando miflash tudo correr bem depois
mas inicial que meu telefone foi reiniciado, ele ficou preso no modo fastboot quando eu reiniciei novamente, eleizou no modo fastboot
eu tentei recuperar os dados usando o modo de recuperação
eu tentando usar o modo de reparar
e eu tentei inicialização segura
nada funcionou, sempre inicializa no modo fastboot
Alguém pode me ajudar por favor
Click to expand...
Click to collapse
Mod edit - translated by https://www.deepl.com/translator
You need to use the SpFlashTool tool on this device, for being a mediatek the miflash tool does not work at all, I speak from experience lose, but there in the tool you have to just the Donwload option or the device can block no bootloader and even lose the IMEI, and gives a lot of work to recover again, and also need to use the Bipass Tool before the SpFlashTool, without the Bipass tool does not work .
*****************************************************************
Você precisa usar a ferramenta SpFlashTool nesse aparelho, por ser um mediatek a ferramenta miflash não funciona de jeito nenhum, eu falo por experiência própria perder, mas lá na ferramenta você tem que apenas a opção Donwload ou o aparelho pode bloquear nenhum bootloader e até perder o IMEI, e dá muito trabalho para recuperar novamente, e também precisa usar a ferramenta Bipass Tool antes do SpFlashTool, sem a ferramenta Bipass não dá certo .
If you are stuck on fastboot mode on your POCO M3 Pro, don't worry! There are a few things that you can try in order to fix this issue.
First, try restarting your phone. If that doesn't work, then try booting into recovery mode and doing a factory reset. If that still doesn't work, then you may need to flash a new ROM onto your phone.
If you are not comfortable with any of these solutions, then you can always take your phone to a POCO service center or a qualified repair shop. They will be able to help you troubleshoot the issue and get your phone working again.
jack lamters said:
If you are stuck on fastboot mode on your POCO M3 Pro, don't worry! There are a few things that you can try in order to fix this issue.
First, try restarting your phone. If that doesn't work, then try booting into recovery mode and doing a factory reset. If that still doesn't work, then you may need to flash a new ROM onto your phone.
If you are not comfortable with any of these solutions, then you can always take your phone to a POCO service center or a qualified repair shop. They will be able to help you troubleshoot the issue and get your phone working again.
Click to expand...
Click to collapse
thank you for the reply
i did solve it using a new rom (13.0.2) and the phone started normally
i think the problem happened because i downgraded the version in the first try
XxMarcelo_SillvaxX said:
Você precisa usar a ferramenta SpFlashTool nesse aparelho, por ser um mediatek a ferramenta miflash não funciona de jeito nenhum, eu falo por experiência própria perder, mas lá na ferramenta você tem que apenas a opção Donwload ou o aparelho pode bloquear nenhum bootloader e até perder o IMEI, e dá muito trabalho para recuperar novamente, e também precisa usar a ferramenta Bipass Tool antes do SpFlashTool, sem a ferramenta Bipass não dá certo .
Click to expand...
Click to collapse
Por favor não fales português no XDA, podes usar um tradutor online, é uma regra e não quero que penses que estou a dizer isto para o mal mas sim para o teu bem, por favor lê a regra nº4
tetou said:
thank you for the reply
i did solve it using a new rom (13.0.2) and the phone started normally
i think the problem happened because i downgraded the version in the first try
Click to expand...
Click to collapse
Have you tried again, could you downgrade back to MIUI 12? I am planning to also downgrade but I'm unsure
1lopes said:
Have you tried again, could you downgrade back to MIUI 12? I am planning to also downgrade but I'm unsure
Click to expand...
Click to collapse
i'm on it right now , i will keep you updated
UPDATE: i tried the 12.5.5 rom from this website and it worked fine i think i downloaded the wrong version in the first try
Redmi Note 10 5G Firmware / POCO M3 Pro 5G / Redmi Note 10T Firmware
Redmi Note 10 5G Firmware, Find rom POCO M3 Pro 5G & ROM Redmi Note 10 5G all version, free download on my site. / Redmi Note 10T firmware
xiaomifirmware.net
miui13 is better. app are updated. many super cool mod are available. downgrade to miui12 in my opinion is not the best choice
wetito said:
miui13 is better. app are updated. many super cool mod are available. downgrade to miui12 in my opinion is not the best choice
Click to expand...
Click to collapse
i had alot of performance and battery issues with MIUI 13
I was having same problem with MI 11 Ultra, Downgrading to MIUI 12. Try Flashing the ROM using "Xiaomi ADB/Fastboot Tools".
MI Flash Tool was constantly giving me Flash Timout Error.
wetito said:
miui13 is better. app are updated. many super cool mod are available. downgrade to miui12 in my opinion is not the best choice
Click to expand...
Click to collapse
But its a battery killer, I was getting only 3 to 3.5 Hour SOT. With Miui 12 Downgrade, I am currently getting more then 5 hours.
irfan_omi22 said:
I was having same problem with MI 11 Ultra, Downgrading to MIUI 12. Try Flashing the ROM using "Xiaomi ADB/Fastboot Tools".
MI Flash Tool was constantly giving me Flash Timout Error.
Click to expand...
Click to collapse
First time with Mi Flash downgrade and was a boot
tetou said:
i'm on right now , i will keep you updated
UPDATE: i tried the 12.5.5 rom from this website and it worked fine i think i downloaded the wrong version in the first try
Redmi Note 10 5G Firmware / POCO M3 Pro 5G / Redmi Note 10T Firmware
Redmi Note 10 5G Firmware, Find rom POCO M3 Pro 5G & ROM Redmi Note 10 5G all version, free download on my site. / Redmi Note 10T firmware
xiaomifirmware.net
Click to expand...
Click to collapse
Thanks for updating me
irfan_omi22 said:
But its a battery killer, I was getting only 3 to 3.5 Hour SOT. With Miui 12 Downgrade, I am currently getting more then 5 hours.
Click to expand...
Click to collapse
i charge my phone for 10 minutes 2-3 times a day. SOT statistics are useless for new phones. i prefer a software updated with modern functions instead an holdest
XxMarcelo_SillvaxX said:
Mod edit - translated by https://www.deepl.com/translator
You need to use the SpFlashTool tool on this device, for being a mediatek the miflash tool does not work at all, I speak from experience lose, but there in the tool you have to just the Donwload option or the device can block no bootloader and even lose the IMEI, and gives a lot of work to recover again, and also need to use the Bipass Tool before the SpFlashTool, without the Bipass tool does not work .
*****************************************************************
Você precisa usar a ferramenta SpFlashTool nesse aparelho, por ser um mediatek a ferramenta miflash não funciona de jeito nenhum, eu falo por experiência própria perder, mas lá na ferramenta você tem que apenas a opção Donwload ou o aparelho pode bloquear nenhum bootloader e até perder o IMEI, e dá muito trabalho para recuperar novamente, e também precisa usar a ferramenta Bipass Tool antes do SpFlashTool, sem a ferramenta Bipass não dá certo .
Click to expand...
Click to collapse
@XxMarcelo_SillvaxX
As courtesy I've translated your above post. Same applies to your post here, here, here, and here! This is AGAIN a friendly reminder that English is the mandatory language! With reference to rule no. 4 of the XDA Forum Rules, please post in English or add at least an English translation to your Portuguese posts.
Spoiler: Rule No. 4
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Already your very first post on XDA had to be translated, what was accomplished by my esteemed team mate @shadowstep who also informed you - even in your native language - here about the language requirements on XDA. It seems to me you simply don't care. Please be aware that any further post not in English or without an English translation might lead to more severe consequences to your account.
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
Related
Hey guys,
Just bought myself today a Asus ZenFone go (ZB500KG) Quite a new phone to the market that was released early january. If anybody has any experience with rooting or doing some codes that could really help me out, As I like to use link2sd (Becuz the storage is so low ) maybe someone can help me root and maybe create a custom rom
Source code and firmware :
https://www.asus.com/support/Download/39/2/0/23/h6gVfknIAgC7p5xa/32/
Specs:
http://www.gsm-specs.com/asus-zenfone-go-zb500kg/
thanks for reading this post, I hope somebody can help me
Zayn Kelly said:
Hey guys,
Just bought myself today a Asus ZenFone go (ZB500KG) Quite a new phone to the market that was released early january. If anybody has any experience with rooting or doing some codes that could really help me out, As I like to use link2sd (Becuz the storage is so low ) maybe someone can help me root and maybe create a custom rom
Source code and firmware :
https://www.asus.com/support/Download/39/2/0/23/h6gVfknIAgC7p5xa/32/
Specs:
http://www.gsm-specs.com/asus-zenfone-go-zb500kg/
thanks for reading this post, I hope somebody can help me
Click to expand...
Click to collapse
I have the same phone and i'm looking everywhere but still can't find a clear method to root or install TWRP. Hope someone can enlighten us.
Kingroot works kinda ok, you guys should try it but custom ROM is way better
tonybenzo said:
Kingroot works kinda ok, you guys should try it but custom ROM is way better
Click to expand...
Click to collapse
No custom roms for this phone now :crying:
Go to google chrome
Download kingo root apk
Install
Start rooting
Done.
zen fone lite zb500kg
Those who use ASUS zenfone zb500kg and have problems installing programs from insufficient space> although you have a sd card installed in the phone, try to use other market than google aps <like (aptoide) Applications are installed on an external card <without root and other tricks:good::good::good::good::good::good:
???
what should i download or use between the two kingroot or kingoroot? thanks guys!
Twrp or cwm for our device please... Badly needed for modding
I have the same phone, Can anyone help us to have twrp or custom rom? pleeeeeese
i have the same phone and i have rooted it with kingroot. my main purpose was to be able to install big games, im not much into customizing things. everything is working fine. i'm using link2sd premium, where i can move internal data and obb files to sd card
however, i would love it if i can replace the kingroot with supersu. have tried different methods and ive given up
update:
was able to replace kingroot with supersu using supersume, however, you must use a lower version of kingroot
version i used was 4.6.2, and the supersume version is 6.7
it worked. im now using supersu on my asus zb500kg. i will leave it at that since im not into flashing roms
tobymarshall said:
i have the same phone and i have rooted it with kingroot. my main purpose was to be able to install big games, im not much into customizing things. everything is working fine. i'm using link2sd premium, where i can move internal data and obb files to sd card
however, i would love it if i can replace the kingroot with supersu. have tried different methods and ive given up
update:
was able to replace kingroot with supersu using supersume, however, you must use a lower version of kingroot
version i used was 4.6.2, and the supersume version is 6.7
it worked. im now using supersu on my asus zb500kg. i will leave it at that since im not into flashing roms
Click to expand...
Click to collapse
got any problem till now after rooting?
Mod for ZB500KG
I'm sorry for the translation with Google, I know almost nothing English, but I feel that I can share my experience with this Smartphone, I also do not understand much about programming, but I managed to make a Recovery work for it, it's attached the link to download.
let's go to what matters, I could not unlock the bootloader, but this will not prevent us from having a rooted device and with TWRP recovery, for this I performed the following tasks:
1 - Preparing For ROOT - The ZB500kg should be in the version and software (Version WW-12.0.0.0129) - DOWLOAD - https://www.asus.com/Phone/ZenFone-Go-ZB500KG/HelpDesk_Download /
if yours is above that do a downgrade, this is necessary to do the ROOT.
2 - To do ROOT I used the king root- I particularly hate this function but it was the only way I could, but later it will be possible to change the kinguser by SuperSU easily with TWPR recovery.
3- With ROOT - it will be possible to flash TWRP_Recovery.img for example with FlashFY or the terminal emulator as in this post: https://forum.xda-developers.com/showthread.php ? t = 2364018
DOWLOAD of TWRP that worked with me TESTED.
I have all the backup files of this smartphone, who need can ask me.
but I need a help, delete the partition (aboot.img) and restart the device, I made a hardbrick, and I am now with (qualcomm hs-usb qdloader 9008 driver) or (qhsusb_bulk in the installed driver), I am trying to recover it with QFIL but I get the error Sahara fail
*(14:20:33: ERROR: function: main: 297 Could not connect to \\. \ COM3
Download Fail: Sahara Fail: QSaharaServer Fail: Process fail
Finish Download)
can someone help me solve?
em portugues:
amigos me desculpe pela tradução com Google, eu não sei quase nada de inglês, mas sinto que posso compartilhar minha experiencia com esse Smartfone, eu também não intendo muito sobre programação, mas consegui fazer funcionar um Recovery para ele, esta em anexo o link para download.
vamos ao que interessa, eu não consegui desbloquear o bootloader, porem isso não vai nos impedir de ter um dispositivo rooted e com TWRP recovery, para isso eu realizei as seguintes tarefas:
1 - Preparando Para ROOT - o ZB500kg deve estar na versão e software (Version WW-12.0.0.0129) - DOWNLOAD - https://www.asus.com/Phone/ZenFone-Go-ZB500KG/HelpDesk_Download/
se o seu estiver acima disso faça um downgrade, isso se faz necessário para se fazer o ROOT.
2 - Para fazer ROOT usei o king root - eu particularmente odeio esta função porem foi o único meio que consegui, porem depois sera possível trocar o kinguser pelo SuperSU facilmente com TWPR recovery.
3- Com ROOT - vai ser possível realizar um flash do TWRP_Recovery.img por exemplo com o FlashFY ou pelo terminal emulator como neste post : https://forum.xda-developers.com/showthread.php?t=2364018
DOWLOAD do TWRP que funcionou comigo TESTADO.
eu tenho todos os arquivos backup deste smartfone, quem precisar pode me pedir.
porem eu preciso de uma ajuda, deletei a particao (aboot.img) e reiniciei o aparelho, realizei um hardbrick, e estou agora com (qualcomm hs-usb qdloader 9008 driver) ou (qhsusb_bulk no driver instaled), estou tentando recuperar ele com QFIL porem recebo o erro Sahara fail
(14:20:33: ERROR: function: main:297 Could not connect to \\.\COM3
Download Fail:Sahara Fail:QSaharaServer Failrocess fail
Finish Download)
alguém pode me ajudar a resolver?
spaycker said:
I'm sorry for the translation with Google, I know almost nothing English, but I feel that I can share my experience with this Smartphone, I also do not understand much about programming, but I managed to make a Recovery work for it, it's attached the link to download.
let's go to what matters, I could not unlock the bootloader, but this will not prevent us from having a rooted device and with TWRP recovery, for this I performed the following tasks:
1 - Preparing For ROOT - The ZB500kg should be in the version and software (Version WW-12.0.0.0129) - DOWLOAD - https://www.asus.com/Phone/ZenFone-Go-ZB500KG/HelpDesk_Download /
if yours is above that do a downgrade, this is necessary to do the ROOT.
2 - To do ROOT I used the king root- I particularly hate this function but it was the only way I could, but later it will be possible to change the kinguser by SuperSU easily with TWPR recovery.
3- With ROOT - it will be possible to flash TWRP_Recovery.img for example with FlashFY or the terminal emulator as in this post: https://forum.xda-developers.com/showthread.php ? t = 2364018
DOWLOAD of TWRP that worked with me TESTED.
I have all the backup files of this smartphone, who need can ask me.
but I need a help, delete the partition (aboot.img) and restart the device, I made a hardbrick, and I am now with (qualcomm hs-usb qdloader 9008 driver) or (qhsusb_bulk in the installed driver), I am trying to recover it with QFIL but I get the error Sahara fail
*(14:20:33: ERROR: function: main: 297 Could not connect to \\. \ COM3
Download Fail: Sahara Fail: QSaharaServer Fail: Process fail
Finish Download)
can someone help me solve?
em portugues:
amigos me desculpe pela tradução com Google, eu não sei quase nada de inglês, mas sinto que posso compartilhar minha experiencia com esse Smartfone, eu também não intendo muito sobre programação, mas consegui fazer funcionar um Recovery para ele, esta em anexo o link para download.
vamos ao que interessa, eu não consegui desbloquear o bootloader, porem isso não vai nos impedir de ter um dispositivo rooted e com TWRP recovery, para isso eu realizei as seguintes tarefas:
1 - Preparando Para ROOT - o ZB500kg deve estar na versão e software (Version WW-12.0.0.0129) - DOWNLOAD - https://www.asus.com/Phone/ZenFone-Go-ZB500KG/HelpDesk_Download/
se o seu estiver acima disso faça um downgrade, isso se faz necessário para se fazer o ROOT.
2 - Para fazer ROOT usei o king root - eu particularmente odeio esta função porem foi o único meio que consegui, porem depois sera possível trocar o kinguser pelo SuperSU facilmente com TWPR recovery.
3- Com ROOT - vai ser possível realizar um flash do TWRP_Recovery.img por exemplo com o FlashFY ou pelo terminal emulator como neste post : https://forum.xda-developers.com/showthread.php?t=2364018
DOWLOAD do TWRP que funcionou comigo TESTADO.
eu tenho todos os arquivos backup deste smartfone, quem precisar pode me pedir.
porem eu preciso de uma ajuda, deletei a particao (aboot.img) e reiniciei o aparelho, realizei um hardbrick, e estou agora com (qualcomm hs-usb qdloader 9008 driver) ou (qhsusb_bulk no driver instaled), estou tentando recuperar ele com QFIL porem recebo o erro Sahara fail
(14:20:33: ERROR: function: main:297 Could not connect to \\.\COM3
Download Fail:Sahara Fail:QSaharaServer Failrocess fail
Finish Download)
alguém pode me ajudar a resolver?
Click to expand...
Click to collapse
acho que isso resolve sue problema se não, flash pelo adb
https://www.stockrom.net/2017/12/st...-zenfone-go-zb500kg-android-5-1-lollipop.html
Uma dúvida, você apagou o boot de reinicio?
no problem after rooting via twrp
darkwar11 said:
got any problem till now after rooting?
Click to expand...
Click to collapse
guys you just need to boot twrp on cmd line and after flashing supersu ( the last update)
Can anyone help me for finding TWRP custom recovery For Asus ZenFone go zb500kg?
Please give me the link if anyone know. My email address [email protected]
roms and development
hello guys still do not get anything, I'm also looking for roms or some development for this phone would like a roms cleaner something more to the pure android I have if you want can leave contact to join the owners of this phone to see if we can get some development and we help each other say? :good:
Comprei há 2 meses um Xiaomi Redmi Note 9S e estou enfrentando um problema Grave. Ele do nada aciona ao mesmo tempo Lanterna, tira vários prints, faz ligação e perco o controle total. Ele fica completamente maluco. Só para eu reiniciando, pois não consigo clicar em nada. Isso acontece umas 5 vezes ao dia.
Já formatei ele sem backup de configuração, e o problema persiste.
Miui Global 11.0.11
128 Rom
6 Ram
Versão do Android 10 QKQ1
----------
MOD EDIT: English Translation Below
I bought a Xiaomi Redmi Note 9S 2 months ago and I am facing a Serious problem. He suddenly activates the Flashlight, takes several prints, calls and loses total control. He goes completely crazy. Just for me to restart, because I can't click anything. This happens about 5 times a day.
I have already formatted it without configuration backup, and the problem persists.
Miui Global 11.0.11
128 Rom
6 Ram
Android version 10 QKQ1
@norlando.silva Hi! I see that you're new here. Welcome to XDA! Please note that XDA is an international forum, and hence only English is permitted to be used across the site. If you are not comfortable with English, kindly use a third party translation website/tool to translate your native language to English and then post. This is as per the Forum Rules, which you should read before posting going forward.
Regards,
shadowstep
Forum Moderator
----------
@norlando.silva Oi! Vejo que você é novo aqui. Bem-vindo ao XDA! Observe que o XDA é um fórum internacional e, portanto, apenas o inglês pode ser usado no site. Se você não se sentir confortável com o inglês, use um site / ferramenta de tradução de terceiros para traduzir seu idioma nativo para o inglês e depois poste. Isso está de acordo com as Regras do Fórum, que você deve ler antes de postar.
Saudações,
shadowstep
Moderador do fórum
APENAS EM INGLÊS. (ENGLISH ONLY.)
Thread in wrong section.
This section is for MERLIN (redmi note 9).
Do you need help with your MERLIN device ?
Read this FAQ: https://forum.xda-developers.com/t/...for-merlin-redmi-10x-4g-redmi-note-9.4225177/
What's up guys
I need some help here, my mi 9 does not install any rom other than the global miui, all the other roms I install, she goes back to twrp again, she does the whole installation process more when she reboots back to twrp, I tried several versions of twrp up to orange fox and remains the same.
You can help me, I appreciate it.
----------
MOD EDIT: English Translation Below
What's up guys
I need some help here, my mi 9 does not install any rom other than the global miui, all the other roms I install, she goes back to twrp again, she does the whole installation process more when she reboots back to twrp, I tried several versions of twrp up to orange fox and remains the same.
You can help me, I appreciate it.
@guih655 Hi! I see that you're new here. Welcome to XDA! Please note that XDA is an international forum, and hence only English is permitted to be used across the website.
The above is as per the Forum Rules:
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Click to expand...
Click to collapse
As a courtesy, I've added the English translation to your post. Going forward, kindly use English to post/reply on the forum.
Regards,
shadowstep
Forum Moderator
----------
Oi! Vejo que você é novo aqui. Bem-vindo ao XDA! Observe que o XDA é um fórum internacional e, portanto, apenas o inglês pode ser usado no site.
O acima está de acordo com as Regras do Fórum:
4. Use o idioma inglês.
Entendemos que, com todas as nacionalidades diferentes, nem todos falam bem inglês, mas por favor, tente. Se você realmente não consegue postar em inglês, use um tradutor online. Você é livre para incluir sua mensagem original em seu próprio idioma, abaixo da tradução em inglês. (Esta regra cobre suas postagens, entradas de perfil e assinatura). Você pode tentar: - https://translate.google.com/ ou https://www.babelfish.com/ ou usar um de sua escolha.
Click to expand...
Click to collapse
Como cortesia, adicionei a tradução em inglês à sua postagem. Indo em frente, use o inglês para postar / responder no fórum.
Saudações,
shadowstep
Moderador do fórum
guih655 said:
E ai galera
preciso de um ajuda aqui, meu mi 9 não instala nenhuma rom que não mar a miui global, todas as outras roms que instalo, ela volta pro twrp novamentre, ela faz todo processo de instalação mais quando reinicia volta de novo pro twrp, ja tentei várias versões do twrp ate o orange fox e continua na mesma.
Srem pode me ajudar eu agradeço.
----------
MOD EDIT: English Translation Below
What's up guys
I need some help here, my mi 9 does not install any rom other than the global miui, all the other roms I install, she goes back to twrp again, she does the whole installation process more when she reboots back to twrp, I tried several versions of twrp up to orange fox and remains the same.
You can help me, I appreciate it.
Click to expand...
Click to collapse
You need to install global miui 12 before flashing roms.
jjgvv said:
You need to install global miui 12 before flashing roms.
Click to expand...
Click to collapse
can i install over the miui 12 the custom that i want to install?
just install miui 12 at the same way as miui 11
Has anyone managed to install magisk on a95x f4 tv box? how? Is it stable?
I've tried unpacking the stock firmware, patching the boot.PARTITION on magisk, and repacking it, causing a bootloop. Root apps dont work. Any ideas?
someone has the link for Android 11 ?? Here are 2 but they are empty, I haven't found it yet, I made contact with the manufacturer with no response yet :/
Maybe this roundabout Tanix X4 ROM? I have not tried yet.
https://forum.xda-developers.com/t/...root-a95x-f4-android-11-rom-com-root.4443429/
You likely have verity enabled, you need to patch the kernels to boot flag 2 so it bypasses, you need to patch vendor boot and boot, but will likely get N/A if its pre-rooted, as you need to remove all root traces, and its more then just removing a previous su binary. All the scripting called through init etc. There is a lot of stuff that needs editing for Magisk to work, I have gotten it working on a few android 11 devices. Working on a method hopefully that does not take so long by using a script. But we will see. Cheers.
I will try slimbox rom, I saw some pictures about that has root.
slimbox android 9
If you just decompile the firmware, you can add root easy, you need a few flags added to the kernel and to a build.prop. its a little different but not much. I have done 4 - X4 revisions, android 12 revisions or 3588, its all the same. If anyone needs the flags or help just let me know. Happy to pass knowledge since most rom devs hold their secrets instead of actually helping people, Just saying....
Here are a few flags you can add to the kernel and to the prop.... Read about what they mean before just doing something so I am not blamed. You can easily decompile any firmware and its images manually or with tools, I have my own SDK and tools I have written. But You can patch most of kernels as long as they have a ramdisk. Hope this helps someone. Cheers --Dataghost
ro.secure=1
security.perf_harden=1
ro.adb.secure=0
ro.boot.flash.locked=0
ro.allow.mock.location=0
ro.debuggable=1
ro.oem_unlock_supported=1
dataghost2014 said:
Aqui estão alguns sinalizadores que você pode adicionar ao kernel e ao prop.... Leia sobre o que eles significam antes de fazer algo para que eu não seja culpado. Você pode descompilar facilmente qualquer firmware e suas imagens manualmente ou com ferramentas, tenho meu próprio SDK e ferramentas que escrevi. Mas você pode corrigir a maioria dos kernels, desde que tenham um ramdisk. Espero que isso ajude alguém. Atenciosamente --Dataghost
ro.seguro=1
security.perf_harden=1
ro.adb.secure=0
ro.boot.flash.locked=0
ro.allow.mock.location=0
ro.debuggable=1
ro.oem_unlock_supported=1
Click to expand...
Click to collapse
olá assim , fiquei empolgado com seu POST . Posso alterar o default.prop na pasta vendor, usando seu texto POST, mas não entendo e não consigo alterar o kernel, poderia me dizer como? Estou tentando colocar magisk na rom do android 10 A95x4, se puder me ajudar eu agradeço.
Mod translation: hello so , I was excited about your POST . I can change the default.prop in the vendor folder, using your POST text, but I don't understand and I can't change the kernel, could you tell me how? I'm trying to put magisk in the android 10 A95x4 rom, if you can help me, I'd appreciate it.
marciobill said:
olá assim , fiquei empolgado com seu POST . Posso alterar o default.prop na pasta vendor, usando seu texto POST, mas não entendo e não consigo alterar o kernel, poderia me dizer como? Estou tentando colocar magisk na rom do android 10 A95x4, se puder me ajudar eu agradeço.
Click to expand...
Click to collapse
I have translated it so I am hoping it will be close, you can decompile the kernel, you. Any rom that has any form of root should have that removed, init portions, start up services etc, sometimes you will have boot ramdisk and sometimes you will have vendor boot ramdisk depending on the version of android, you need to edit those props as well, if its a user firmware or eng you will have to add flags so its able to start adbd root. These are just some quick notes. When I build a firmware from the ground up I do a lot of things, but those are just a few things you will need to add. You can aldo disable AVB, you can use Android Boot Editor, AIK as well will work, I manually do this stuff, but these are methods that will work. So you will want to patch the vbmeta partitions as well. This method works on roms I created on 10, 11 and 12. If you need more guidance let me know. Cheers.
dataghost2014 said:
I have translated it so I am hoping it will be close, you can decompile the kernel, you. Any rom that has any form of root should have that removed, init portions, start up services etc, sometimes you will have boot ramdisk and sometimes you will have vendor boot ramdisk depending on the version of android, you need to edit those props as well, if its a user firmware or eng you will have to add flags so its able to start adbd root. These are just some quick notes. When I build a firmware from the ground up I do a lot of things, but those are just a few things you will need to add. You can aldo disable AVB, you can use Android Boot Editor, AIK as well will work, I manually do this stuff, but these are methods that will work. So you will want to patch the vbmeta partitions as well. This method works on roms I created on 10, 11 and 12. If you need more guidance let me know. Cheers.
Click to expand...
Click to collapse
Obrigado, entendi o que vc escreveu ! Vou tentar por em prática . Se eu tiver alguma dúvida te chamo
Mod translation: Thank you, I understood what you wrote! I will try to put it into practice. If I have any questions, I'll call you
Ola amigo , vc por um acaso teria uma ROM img Android 9 para s905x4 ? Minha tv Box é uma hk1 x4 . Felicidades
Mod translation.....AGAIN! Hello friend, would you by any chance have a ROM img Android 9 for s905x4? My TV Box is a hk1 x4. Cheers
@marciobill
Greetings. As a "last time" courtesy, I have translated your last 3 posts. I will politely ask you to please be respectful and observant of XDA Rule #4 for
all of future posts:
Spoiler: XDA Rule #4
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Your cooperation is expected and appreciated. Thank you.
-Regards: Badger50
Badger50 said:
@marciobill
Saudações. Como uma cortesia de "última vez" , traduzi seus últimos 3 posts. Pedirei educadamente que você seja respeitoso e observe a regra XDA nº 4 para
todos os posts futuros:
Spoiler: Regra XDA #4
4. Use o idioma inglês.
Entendemos que, com todas as diferentes nacionalidades, nem todos falam inglês bem, mas tente. Se você realmente não conseguir postar em inglês, use um tradutor online. Você pode incluir sua mensagem original em seu próprio idioma, abaixo da tradução para o inglês. (Esta regra cobre suas postagens, entradas de perfil e assinatura). Você pode tentar:- https://translate.google.com/ ou https://www.babelfish.com/ ou usar um de sua escolha.
Sua cooperação é esperada e apreciada. Obrigada.
-Atenciosamente: Badger50
Click to expand...
Click to collapse
marciobill said:
Ola amigo , vc por um acaso teria uma ROM img Android 9 para s905x4 ? Minha tv Box é uma hk1 x4 . Felicidades
Mod translation.....AGAIN! Hello friend, would you by any chance have a ROM img Android 9 for s905x4? My TV Box is a hk1 x4. Cheers
Click to expand...
Click to collapse
I apologize for the misunderstanding, the translator on my cell phone is automatically translating into Portuguese even if I write in English. thank you for helping me , this mistake will not happen again
Hello friend, would you by any chance have a ROM img Android 9 for s905x4? My TV Box is a hk1 x4. Cheers
marciobill said:
Hello friend, would you by any chance have a ROM img Android 9 for s905x4? My TV Box is a hk1 x4. Cheers
Click to expand...
Click to collapse
No, I wrote an android 11 for that device.
Bom Dia.
Preciso de ajuda para fazer root no meu dispositivo.
Hoje ele atualizou sozinho para 12.5.10 (GLOBAL)e não tem fastboot rom.
Como faço para fazer o root desta rom?
----------
MOD EDIT: English Translation Below
Good Morning.
I need help rooting my device.
Today it updated alone to 12.5.10 (GLOBAL) and it doesn't have fastboot rom.
How do I root this rom?
Rom global
You can check this video, it works for me.
dmferrer89 said:
Bom Dia.
Preciso de ajuda para fazer root no meu dispositivo.
Hoje ele atualizou sozinho para 12.5.10 (GLOBAL)e não tem fastboot rom.
Como faço para fazer o root desta rom?
----------
MOD EDIT: English Translation Below
Good Morning.
I need help rooting my device.
Today it updated alone to 12.5.10 (GLOBAL) and it doesn't have fastboot rom.
How do I root this rom?
Click to expand...
Click to collapse
dmferrer89 said:
Bom Dia.
Preciso de ajuda para fazer root no meu dispositivo.
Hoje ele atualizou sozinho para 12.5.10 (GLOBAL)e não tem fastboot rom.
Como faço para fazer o root desta rom?
----------
MOD EDIT: English Translation Below
Good Morning.
I need help rooting my device.
Today it updated alone to 12.5.10 (GLOBAL) and it doesn't have fastboot rom.
How do I root this rom?
Click to expand...
Click to collapse
12.5.10(global) magisk patched boot.img
magisk_patched-23000_Dk0RP.img
drive.google.com
You can download the normal recovery rom and follow this guide to extract the boot.img in order to root it : https://www.droidwin.com/extract-payload-bin-stock-boot-image/
Follow method 3 that's what I did to root 12.5.19.0 rom and it went just fine.