I have the C6J6 model and can't even succeed in flashing the damn thing, the intel driver don't work on my pc even if installed with have disk.
Related
Hi all.
I started experiencing weird problems with my Ativ S, so I thought I do a hard reset and start clean. I got stuck to a known issue with the Ativ and GDR3, where after hard reset the apps wont instal from the store. The only solution I saw was to flash the device. I have the GDR2 rom so I thought no problem, however I cant get the drivers to instal on the download mode so I could start the flash process.
I have tried to instal 2 different drivers: SamsungUSBDriver.msi and I8750_Qualcomm_USB_composite_driver_HK11-VB717-38.zip Neither of these (that I found, if they are the correct packages) have worked so that the Ativ is recognized correctly in the download mode and I could start flash. When Ativ is connected in the download mode, its only seen as USB DOWNLOADER with exclamation point at device manager.
Im running 64bit Windows 8.1 Pro system.
Any suggestions are welcomed! Thanks!
And installing SamsungUSBDriver.msi results in an error pictured here. Although next time trying to instal the driver is present as it gives an repair option.
Ok so I found this, probably somthing that could be expected: 2. Install Driver on your PC (i had problems with win 8.1 X64, win7 X64 installation fine)
http://forum.xda-developers.com/showthread.php?t=2391138
So I would need a Win7 system, no idea where I would have one... Other suggestions for this?
Ok problem solved by installing Windows 7 to a empty drive just for this flashing. Luckily I didnt have to instal any updates, just the os and the usb driver.
Hi Guys,
I've tried to install MTK drivers for this phone, to connect to to it for when the Phone is off for install of TWRP, on 2 PCs, however the drivers aren't installed correctly each time.
Did anyone encounter this and been able to solve ? Or if it's not solvable, perhaps there's another way to install TWRP in BLU ?
Thanks,
Michael.
Let me explain, I'm not overposting.
I recently wiped all of the partitions (including internal storage) from recovery, this got me soft bricked. I can't install a new rom (nor from recovery, nor via adb).
So I tried this https://forum.xda-developers.com/oneplus-3t/how-to/unbrick-unbrick-tutorial-oneplus-3t-t3515306 , but I get stuck when it comes to installing the driver on my pc: my phone is shown as unknown device, my pc won't let me install the driver (marked as non compatible with a 64bit pc). I'm running on a 64bit Windows 10, and I can get into test mode.
Anyone can help me?
Thanks in advance guys
I used these drivers on Win10 x64. All you have to do is to temporarily boot with disabled driver signature enforcement (as stated in the tutorial).
Don't mess with test mode.
Turns out my usb ports had a problem... Sorry, after hours of trying it was just a stupid problem.
Thank you anyway!
Hi, i tried to downgrade from official 8.0 to nougat, i flashed the ota zip but ost hangs on "checking device status" at ~5%, also fastboot doesnt recognise the phone. So i believe that it must be some problem with the drivers, if anyone can has them it would be very helpful.
Thanks.
I'm having the same problem, did you fix yours?
Try to download PDANet on your computer, or search by MTK USB DRIVERS! I think the problem is that Windows don't recognize android debug bridge itself, you need to give it a hand.
I've been trying to fix one of my Lenovo K3notes which was bricked after bad flashing. It now won't respond at all.
There are several tutorials about this. But some aspects of them puzzle me.
The method seems to be to enter meta mode, flash the preloader from a stock rom, then flash the whole stock rom separately.
To get into metamode, you have to connect to a Windows computer and check the device manager.
After that, you flash the preloader.
Here are my questions:
1) I use a Linux (Ubuntu) computer, but can have access to a Windows computer if necessary. But it would be good to know how to do this on my own computer. Why is Windows necessary?
2) I don't understand the method to get into Metamode. After finding the phone in the Windows device manager, you are supposed to unplug the phone and start SPflahs. I would have guessed that you would then leave metamode. Is that right?
3) why do you have to flash preloader and stock rom separately? Am I missing some vital step?
4) The tutos mention VCom drivers. Are these the same as the general drivers for the Lenovo phone, are are they specific to this metamode procedure? I have already flashed this phone before with Spflahs, both on my (ubuntu) and my wife's (Windows 7) computers, so drivers are already installed and working for general flashing. Do I need different drivers for preloader?
Thanks