How To Guide [GUIDE] [REALME 8i/NARZO 50] How to easily unlock bootloader, install TWRP and root!

How To Guide [GUIDE] [REALME 8i/NARZO 50] How to easily unlock bootloader, install TWRP and root! - Realme 8i / Narzo 50

Hello! I was bored and I thought that it would be a pretty cool idea to make an updated, universal guide to unlock the Realme 8i/Narzo 50, since there is no deeptest.apk or accessible fastboot for these devices.
THIS GUIDE WILL ERASE ALL OF YOUR DATA! MAKE A BACKUP!
/*
* This Guide is tested and working
* However I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about unlocking and flashing TWRP
* before flashing it! YOU are choosing to make these modifications.
*/
This guide is made for Windows.
Step 0
Requirements
Download and install the latest version of Python. (Windows 10/11; Other OSs)
Download and install USBdk. (here)
Download and extract mtkclient.
Download your device's drivers. (here, we will install them later)
Download this file and copy it to the mtkclient folder.
Open the mtkclient folder, right click on it while you press Shift and then click "Open in Terminal" or something like that.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 1
Unlocking Bootloader
Type pip install -r requirements.txt and press enter.
Type python mtk e metadata,userdata,md_udc and press enter.
Now turn off your phone, and while you press both volume buttons you connect your phone to the PC via a USB cable. DON'T RELEASE THOSE BUTTON EVER!
When it finished and while you continue to press both volume buttons, type python da seccfg unlock.
When the last command has finished, you can release both buttons, disconnect the phone and reboot it untill you see the Realme logo.
When you see the Realme logo, PRESS AND RELEASE THE POWER BUTTON!
This boot will take a while, just wait and re-configure your phone!
Step 2
Installing TWRP
Type python mtk w lk lk.bin and press enter.
Now turn off your phone, and while you press both volume buttons you connect your phone to the PC via a USB cable. DON'T RELEASE THOSE BUTTON EVER!
When the last command has finished, you can release both buttons, disconnect the phone and reboot it.
Now turn your phone off again and turn it on while pressing Vol-, a screen like this should appear.
Now, with your phone connected to your PC, open up Device Manager on your PC.
Right click on the device that's called Android and press Update driver.
Select 'Browse my computer for drivers'
Select Browse and select the file android_winusb.inf that is in the drivers folder.
When you're done, close Device Manager, install ADB from here and open the app Minimal ADB and Fastboot.
Download TWRP and type in terminal fastboot flash recovery <path to TWRP>
When it's done, type fastboot reboot recovery and you should boot straight to TWRP!
Step 2
Rooting
On your PC, download the Magisk APK, rename it to magisk.zip and copy it to your phone's memory.
On TWRP, flash the Magisk zip and you're good to go!
Credits
Thanks to Pritish and Sidharth for making the OG guides which I merged!
Thanks for the TWRP staff for... creating TWRP ig
Thanks to shimp208 for making the Minimal ADB and Fastboot tools!
Join the Telegram Group!

If you need help, join the Telegram group or leave a comment down here!

Iam on realme ui 3....does this will work for me....???

ankitpant said:
Iam on realme ui 3....does this will work for me....???
Click to expand...
Click to collapse
same question.
and if have to downgrade can i upgrade later? and root it? or it'll block bootloader again?
anyway to root in realme UI3.0 with magisk?

Hi

I apply your method, i was unlocked bootloader successfully but when i enter this command 'python mtk w lk lk.bin' my device can't boot, just black screen
Realme UI 3

sakib7040 said:
I apply your method, i was unlocked bootloader successfully but when i enter this command 'python mtk w lk lk.bin' my device can't boot, just black screen
Realme UI 3
Click to expand...
Click to collapse
Hi,
Connect phone to original wall charger and wait for it to BUZZ (5 to 10 minutes). Then proceed to pritish1998 unbricking method.
Also installing TWRP via this method should be tried with rui2.
Hope it helps

is this still work today 7/02/2023

Yes. This method work's under rui2
OatSiriM said:
is this still work today 7/02/2023
Click to expand...
Click to collapse

does this work with python 3.8.10? since i only have win7 x64
also realme8i TWRP can this be use with narzo 50?

ghochenk said:
does this work with python 3.8.10? since i only have win7 x64
also realme8i TWRP can this be use with narzo 50?
Click to expand...
Click to collapse
Pythons 3.8.1 will work. As for the realme flash tool stick to 2.xx. as the lastest 3.xx does not seam to recognise the phone

zachitou said:
Pythons 3.8.1 will work. As for the realme flash tool stick to 2.xx. as the lastest 3.xx does not seam to recognise the phone
Click to expand...
Click to collapse
Thank you

zachitou said:
Pythons 3.8.1 will work. As for the realme flash tool stick to 2.xx. as the lastest 3.xx does not seam to recognise the phone
Click to expand...
Click to collapse
What to do if I’m under Realme UI 3 ? I can’t do it ?

Realme ui 2 works. Realme ui3 should work. I had No luck with ui 4

zachitou said:
Realme ui 2 works. Realme ui3 should work. I had No luck with ui 4
Click to expand...
Click to collapse
Idk If I wanna do it because I’ve seen a lot of people bootloop :/

HadesBar said:
What to do if I’m under Realme UI 3 ? I can’t do it ?
Click to expand...
Click to collapse
You can but you need lk file for rui3

sakib7040 said:
I apply your method, i was unlocked bootloader successfully but when i enter this command 'python mtk w lk lk.bin' my device can't boot, just black screen
Realme UI 3
Click to expand...
Click to collapse
You need lk file for rui3

HadesBar said:
Idk If I wanna do it because I’ve seen a lot of people bootloop :/
Click to expand...
Click to collapse
You won't get any bootloop if you use proper files

zachitou said:
Realme ui 2 works. Realme ui3 should work. I had No luck with ui 4
Click to expand...
Click to collapse
You can root rui4

Related

[TUT][HOW-TO] How to root Xiaomi Redmi2 and install CWM

ARE YOU SEARCHING TO ROOT YOUR REDMI 2 ?
DISCLAIMER:DO THIS ON YOUR OWN. I'M NOT RESPONSIBLE FOR ANYTHING HAPPENS TO YOU AND YOUR DEVICE.PLEASE DONOT MIRROR THE LINKS
CLICK HERE FOR NATIVE ROOT
IF YOU ARE GETTING STOCK RECOVERY EVEN AFTER FLASHIN CWM, SEE THIS POST
STEP 1- FLASHING CWM ON YOUR PHONE
1.At first, you'll need the "adb" and "fastboot" tools. Get them HERE
2.Extract them into a folder, let's name it "Redmi2" (You can give your own name to the folder. That doesn't matter here.)
3.Now get the CWM .img file from HERE
You can use Philz Touch recovery also. Get HERE
4.Rename cwm.img or philz.img you downloaded above and as "recovery.img" and place it in the Redmi2 folder.
Now the folder will look like this-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5.Press and hold "shift" button and right click in the blank area of the folder and click on "open command promt window here". The command prompt will open.
6.Now turn off your Redmi2. Wait until it vibrates. After it's vibrated press and hold "Volume down and Power" keys together until it boots into "fastboot mode". Now connect the Redmi2 to your PC/Laptop through USB cable in fastboot mode itself.
7.Get to the command prompt now.
Now type: " fastboot devices " (without these- " " )
Like this-
8.Once you enter that command, you will get a non-empty name for the device meaning the device is connected. Proceed to enter the next command
9.Now enter the next command: " fastboot flash recovery recovery.img "
Like this-
10. Now this ends...
Type the last command: " fastboot reboot "
Like this-
11.Now your phone will reboot with ClockWorkMod(CWM) installed. CHEERS...
STEP 2- ROOTING YOUR PHONE
1. Firstly get the SuperSU.zip from HERE
2. Now copy the downloaded zip to your sdcard (not in any folder just in sdcard)
3. Boot into CWM recovery by turning off the phone and pressing "Volume UP and Power" button together after the phone vibrates.
4. Once CWM main menu is displayed, select "Install from zip" and browse to the zip that you downloaded earlier and select it.
5. Install the zip. If you get any warning, ignore and proceed.
6. After the installation is complete, reboot your device. (I think you can do that)
7. VOILA..!!! YOU ROOTED YOUR REDMI2
PLEASE HIT THANKS
JOIN OUR FACEBOOK GROUP HERE
CREDITS:
1. I don't claim any credit for "adb and fastboot tools" and the "recovery.img" and "SuperSu.zip"
2. Thanks to @subhrajiNath on Miui english forums who wrote the original guides.
Thread link is here and here

I cannot connect to device using adb on ubuntu.
Any Idea ?
I have opened a thread about this issue here

postadelmaga said:
I cannot connect to device using adb on ubuntu.
Any Idea ?
I have opened a thread about this issue here
Click to expand...
Click to collapse
I'm really sorry man..I've never used ubuntu But I wish to...
Join the FB group and ask there...Maybe it can be helpfull

? not flashing ?
noobpremium said:
I'm really sorry man..I've never used ubuntu But I wish to...
Join the FB group and ask there...Maybe it can be helpfull
Click to expand...
Click to collapse
Ok my fault, It looks I miss the notification MIUI that ask me to allow my pc to dev mode...
Now I have another issue:
After I flash the recovery with flashboot I reboot into recovery but I still have the default one ... not CWM any idea what could be wrong ?
( I have already did this procedure on another phone, same issue but after doing it a couple of time something make the difference )

postadelmaga said:
Ok my fault, It looks I miss the notification MIUI that ask me to allow my pc to dev mode...
Now I have another issue:
After I flash the recovery with flashboot I reboot into recovery but I still have the default one ... not CWM any idea what could be wrong ?
( I have already did this procedure on another phone, same issue but after doing it a couple of time something make the difference )
Click to expand...
Click to collapse
get "Flashify" app from playstore and first take backup of stock recovery and then flash the cwm with it. Thats it..
Actually I didn't knew this method before i made this guide..
Anyway, fastboot gives us a different feel, doesn't it? :v

wait I don't know flashify but it looks it needs root to flash the recovery ... but I think I need cwm to root ... so I think this is not gonna work ...
Ok got it, this may be useful to anybody face the issue with recovery:
I discovered you can workaround the issue in this way:
Temporary boot into CWM:
HTML:
fastboot boot recovery.img
Root the device using CWM
Flash CWM using flashify
[ CWM when you log out ask you for root so maybe it is not necessary to use the zip file ( but I'm not very expert so maybe I'm wrong)]
You can install GAPPS with CWM `gapps-kk-20140606-signed .zip` but be careful, whenever you update MIUI you will look all software installed using CWM. ( superSu and GAPPS for example )

thanks
thanks!

eienkisu said:
thanks!
Click to expand...
Click to collapse
Pleasure

Okay bro :good:
I'll update the OP

I confirm #postadelmaga the CWM recovery does not stay, the only way to do access it is the fastboot boot recovery.img Here's how I succeeded with two phones now.
power on, start wifi, do Miui updates
install ADB or the files above on PC
reboot to fastboot with voldown+pwr
now comes fastboot boot recovery.img
in CWM, sideload SuperSu and Gapps
connect you preferred VPN (if in China)
install and update all Google apps needed
delete most Chinese apps

hey i m unable to flash recovery plzz help
Device version 2014818
Sent from my 2014818

Hi buddy could you plz port touchwiz from galaxy prime?

The simpler solution is to use the xiaomi update tool and flash a developer rom that has builtin root.
http://xiaomi.eu/community/threads/5-4-10.27429/
howto & root from permissions menu:
https://watchpage.wordpress.com/201...redmi-note-4g-developers-roms-version-miui-6/
But to have the cwm running on the phone is always a safe bet for some recovery actions.

not working.
I tried this method. its stuck with flashing the recovery image. always showing flashing the recovery image.... that's all.

godwintgn said:
I tried this method. its stuck with flashing the recovery image. always showing flashing the recovery image.... that's all.
Click to expand...
Click to collapse
Are you on win7? I got this same issue on my win7... try on win8 it works flawlessly
Please hit thanks if done

Ya bro I am using Windows 7. I don't have Windows 8. Thanks for the info.

Shrihari007 said:
Hi buddy could you plz port touchwiz from galaxy prime?
Click to expand...
Click to collapse
TW sucks man.. why do you want it :/ anyways I'll try

leuk_he said:
The simpler solution is to use the xiaomi update tool and flash a developer rom that has builtin root.
http://xiaomi.eu/community/threads/5-4-10.27429/
howto & root from permissions menu:
https://watchpage.wordpress.com/201...redmi-note-4g-developers-roms-version-miui-6/
But to have the cwm running on the phone is always a safe bet for some recovery actions.
Click to expand...
Click to collapse
Thanks to you bro.. I'll update the OP for those who are facing some issues with my guide's precedure..

OP Updated
I've updated the OP with the other guide's link.. please check it out if you're having some issues with this one

godwintgn said:
Ya bro I am using Windows 7. I don't have Windows 8. Thanks for the info.
Click to expand...
Click to collapse
Try on some friend's PC or something

[CLOSED][UNOFFICIAL] TWRP 3.4.0-0 | Team Win Recovery Project | Nokia 8.1 | Phoenix |

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note - Iam Not Responsible for bricked devices
About Team win recovery project
TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. We also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.
Team Win was originally formed to work on porting WiMAX to CM7 for the HTC EVO 4G. After our work on the EVO 4G we wanted to work on a project that would work on more devices than just the EVO 4G and we settled on working on a recovery. Today TWRP is the leading custom recovery for Android phones.
Installation procedure
Note - As per the users request I tried my best to bring twrp support for Nokia SDM710 Community and I really don't own this phone
1 . Download twrp-3.4.0-0-PNX_sprout-10.0.img copy in one folder
2. boot in to download mode ( Volume down & power button )
3. open cmd type fastboot -w
4. type fastboot flash boot twrp-3.4.0-0-PNX_sprout-10.0.img
5. type fastboot reboot & immediately press volume up & power button for 8 seconds to boot in to twrp
9. Flash magisk or whatever you want either rom,gsi or kernel but fastboot -w command must and should until I fix decryption
Credits
* A big massive thank you for the one who tested my builds around 20+ images in a single day may be without him it's impossible to find another tester. thanks man TechnoStone
bugs- decryption & more..!!
Download Android 10 Twrp-3.4.0-0 From Here

XDA:DevDB Information
TWRP 3.4.0-0 , for the Nokia 8.1
Contributors
Raghu varma
My build script: https://github.com/RaghuVarma331/scripts
Source Code: https://github.com/omnirom/android_bootable_recovery
Device Source Code: https://github.com/Nokia-SDM660/android_device_nokia_PNX_sprout-TWRP
Version Information
Status: Experimental
Created 2020-04-29
Last Updated 2020-06-25

reserved

hello, I entered fastboot, but I cannot run command on my PC although I have installed ADB tool on my Pc. What can I do to flash your custom recovery on my nokia 8.1?
Big thanks to your for supporting Nokia 8.1 fan

nhthiencp said:
hello, I entered fastboot, but I cannot run command on my PC although I have installed ADB tool on my Pc. What can I do to flash your custom recovery on my nokia 8.1?
Big thanks to your for supporting Nokia 8.1 fan
Click to expand...
Click to collapse
1. Download latest adb platform tools
2. Extract to one folder
3. Name that folder as adb
4. Now copy that folder and paste in c: drive
5. Now copy path
6. Go to this pc give right click and click on environmental variables and click on path add your adb path and save it
7. Now adb & fastboot will work on all locations in your pc
Method 2
Download latest adb platform tools
Extract to one folder and name that as adb
Open adb folder
Open cmd in to that folder
Type fastboot devices
Now you will get your device ID
But before doing all these make sure your bootloader is unlocked
Regards
Raghu Varma

I understood what you explained. I can connect my phone to adn, it showed my device, however, i cannot run "fastboot -w", i think because my phone is still lock bootloader! How to unlock my bootloader, besides Hikari Calyx 's method???
Thanks!

nhthiencp said:
I understood what you explained. I can connect my phone to adn, it showed my device, however, i cannot run "fastboot -w", i think because my phone is still lock bootloader! How to unlock my bootloader, besides Hikari Calyx 's method???
Thanks!
Click to expand...
Click to collapse
.
Open this link and download hmd bootloader unlocker. Remember it will completely void your warranty and not possible to lock bootloader .

Does this really work on N8.1 ?
Or any Nokia ?

issues faced
Its not working sir...TWRP recovery stuck on logo...also the phone keeps restarting and freezing system ui, loss of wifi and hotspot creation facilities after flashing TWRP..I somehow managed to relock bootloader that saved my device or I was sure it was rendered useless... please check it thoroughly b4 uploading...I was on June security patch when flashed the recovery
N b4 u ask yes I followed all steps...

Can u please upload a working twrp please

Changelog - Thu Jun 25 12:41:03 UTC 2020
================================
* https://twrp.me/site/update/2020/06/24/twrp-3.4.0-0-released.html

Please help me!
Raghu varma said:
Changelog - Thu Jun 25 12:41:03 UTC 2020
================================
* https://twrp.me/site/update/2020/06/24/twrp-3.4.0-0-released.html
Click to expand...
Click to collapse
i downloaded unlock key from Nokia, but when I flash unlock key, it notifies me Failed, so what should I do??? Thanks

Thank you for uploading this version. Install worked but touch screen seems non-responsive.
Installed latest build as of today twrp-3.4.0-PNX_sprout-10.0-20200821.img
Cannot find anything in /tmp/recovery.log
Edit: Tried both 3.3.1-0 and 3.4.0 with same result.
For others: dont hold the power button for 8 sec (but shorter) because it will make the device reboot

iljawashere said:
Thank you for uploading this version. Install worked but touch screen seems non-responsive.
Installed latest build as of today twrp-3.4.0-PNX_sprout-10.0-20200821.img
Cannot find anything in /tmp/recovery.log
Edit: Tried both 3.3.1-0 and 3.4.0 with same result.
For others: dont hold the power button for 8 sec (but shorter) because it will make the device reboot
Click to expand...
Click to collapse
it looks like the phone doesn't want to boot into android at all anymore. Only working thing is TWRP wihout touch enabled and fastboot.
Tryed to restore it via OST but it hangs on "getting variable 'productid'". :/ Does anyone want to share a proper boot.img?

iljawashere said:
it looks like the phone doesn't want to boot into android at all anymore. Only working thing is TWRP wihout touch enabled and fastboot.
Tryed to restore it via OST but it hangs on "getting variable 'productid'". :/ Does anyone want to share a proper boot.img?
Click to expand...
Click to collapse
There are stock boot.img collection. 430B is March, C is April, D is May, E is June, F is July, G is August

Doesn't work
After flashing twrp-3.4.0-0-PNX_sprout-10.0-20200829.img, I entered TWRP successfully. Then it stuck at unlock warning message and didn't get in system after rebooting phone.
This TWRP with big problem !!
After flashing back stock boot image and my phone can be booted into system.

after install twrp system not load

Hey guys, anyone can say if it works properly or not?
All those posts saying it half-bricked their phone doesn't seem very reassuring...
It'd be nice to finally have a working TWRP on this phone...

Is it fixed or still not working?

Thread closed on request of OP @Raghu varma

Hardbricked Redmi 9 mt6769

Hello yesterday i bricked my phone when i tried to install twrp recovery. Now my phone is bootlooping from last night. I can't get into fastboot or recovery and the spflashtool does not read the COM port. Can someone help please!!

How to install:
1. Download the attached file: VD171_MTK-bypass.zip.
2. Extract the file and open the folder.
3. Run and install python: python-3.9.1-amd64.exe.
Keep atention: You need to select "Add Python to PATH" before starting the installation.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Open cmd or powershell and execute this command:
pip install pyusb pyserial json5
5. Go to the Driver folder and right-click on the cdc-acm.inf file, then click Install and then, close window.
6. Run and install filter wizard: libusb-win32-devel-filter-1.2.6.0.exe.
7. Launch filter wizard.
8. Select Install a device filter and click Next.
9. Connect powered off phone with volume- button to boot in EDL mode.
10. Once you see new MediaTek USB Port in the list, select it and click Install.
Now, you are ready for bypassing EDL !
How to bypass:
1. Go to the Bypass folder. Run the script: bypass.bat.
2. Connect powered off phone with volume- button to boot in EDL mode.
3. Once you get "Protection disabled" at the end, without disconnecting phone and usb, run SP Flash Tool.
4. Once the SP Flash Tool opens, click Options > Options > Connection.
5. Select UART mode and select Baud rate to 921600.
Now, you are ready for flashing !
How to update the tool:
1. Download latest release of the tool: https://github.com/MTK-bypass/bypass_utility/releases/latest
2. Download latest release of payloads: https://github.com/MTK-bypass/exploits_collection/releases/latest
3. Extract the content of both files to the Bypass folder.
It is updated now.
https://forum.xda-developers.com/attachments/vd171_mtk-bypass-v1-5-zip.5228529/

well there it is follow those steps..

well there it is follow those steps
Stefy1337 said:
Hello yesterday i bricked my phone when i tried to install twrp recovery. Now my phone is bootlooping from last night. I can't get into fastboot or recovery and the spflashtool does not read the COM port. Can someone help please!!
Click to expand...
Click to collapse
you did try booting into EDL right?

Keno_I said:
well there it is follow those steps
you did try booting into EDL right?
Click to expand...
Click to collapse
no, I didn't try. If you refer to edl points I tried to press them but nothing happens. And the spflashtool does not detect the com port.

What port did you connect through, try changing usb ports.
And plugging into usb 2.0

Keno_I said:
What port did you connect through, try changing usb ports.
And plugging into usb 2.0
Click to expand...
Click to collapse
i got only 3.0

You need usb 2.0 it isnt recognized on 3.0.....

Keno_I said:
You need usb 2.0 it isnt recognized on 3.0.....
Click to expand...
Click to collapse
I'll try to get it. Does it work if I use an external USB connected to 3.0?

Im not sure, but try it, all i know that spflashtool doesn't work nicely with USB 3.0 idk why

Keno_I said:
Im not sure, but try it, all i know that spflashtool doesn't work nicely with USB 3.0 idk why
Click to expand...
Click to collapse
Ok thanks a lot <3

Keno_I said:
Im not sure, but try it, all i know that spflashtool doesn't work nicely with USB 3.0 idk why
Click to expand...
Click to collapse
i will update you if i fix it

Stefy1337 said:
i will update you if i fix it
Click to expand...
Click to collapse
Okay, good luck!

Kenora_I said:
Okay, good luck!
Click to expand...
Click to collapse
got this error when open bypass
Traceback (most recent call last):
File "D:\shared folder vmware\VD171_MTK-bypass-v1.5\Bypass\main.py", line 3, in <module>
from src.exploit import exploit
File "D:\shared folder vmware\VD171_MTK-bypass-v1.5\Bypass\src\exploit.py", line 2, in <module>
from serial.serialutil import SerialException
ModuleNotFoundError: No module named 'serial'

Stefy1337 said:
got this error when open bypass
Traceback (most recent call last):
File "D:\shared folder vmware\VD171_MTK-bypass-v1.5\Bypass\main.py", line 3, in <module>
from src.exploit import exploit
File "D:\shared folder vmware\VD171_MTK-bypass-v1.5\Bypass\src\exploit.py", line 2, in <module>
from serial.serialutil import SerialException
ModuleNotFoundError: No module named 'serial'
Click to expand...
Click to collapse
pip install pyserial
Do that if you have python 2
Python 3 may be
pip3 install pyserial

Kenora_I said:
pip install pyserial
Do that if you have python 2
Python 3 may be
pip3 install pyserial
Click to expand...
Click to collapse
hey dude its me again .. i did it .. i bypassed the protection but can you teach me how to use sp flash tool and update frimeware so i can unbrick my device.. please

Update : somehow i managed to get back the recovery and fastboot but still not booting.. idk how to reinstall the rom

Update : Unbricked using mi flash tool and this tutorial https://c.mi.com/oc/miuidownload/detail?guide=2
Love Kenora for help <3

Sorry I was busy but nice to hear it worked!

Question Hi friends!

Hi, sorry but I don't know English well, I was wondering if you could give me the download link of the TWRP for this phone, thanks ......
Redmi Note10 5G EEA

Frankie1975 said:
Hi, sorry but I don't know English well, I was wondering if you could give me the download link of the TWRP for this phone, thanks ......
Redmi Note10 5G EEA
Click to expand...
Click to collapse
Here:
https://forum.xda-developers.com/t/unofficial-twrp-camellia-camellian.4304717/

sorry not run....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Frankie1975 said:
sorry not run....
Click to expand...
Click to collapse
Why install the twrp since there is currently no flashed custom rom and there won't be any soon because of the mediatek soc which is little or not developed.
Have you unlocked the bootloader?

Frankie1975 said:
sorry not run....
Click to expand...
Click to collapse
There is no [recovery] partition on this phone.

yes i unlocked it, how do i recover the partition?

Frankie1975 said:
yes i unlocked it, how do i recover the partition?
Click to expand...
Click to collapse
this is A/B device it doesn't have recovery partition

Frankie1975 said:
yes i unlocked it, how do i recover the partition?
Click to expand...
Click to collapse
Reboot the phone to fastboot (Power + Vol Down)
Connect the phone to the computer using an USB cable (Preferred to use original cable that came with the phone)
Extract the fastboot files and open CMD/Terminal there.
Paste the twrp.img in the same folder.
Type' fastboot boot twrp.img' without the apostrophes.
The phone will reboot in TWRP after that go to Advanced > Flash Current TWRP.
But why?(Again).
If it is to change rom version use this tool:
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/

not running

Frankie1975 said:
not running
View attachment 5609485
Click to expand...
Click to collapse
https://www.droidwin.com/fix-status-read-failed-too-many-links/

changed drivers
changed cable
but it gives me the same two errors as before, even if I only write to the boot partition ....

Frankie1975 said:
changed drivers
changed cable
but it gives me the same two errors as before, even if I only write to the boot partition ....
Click to expand...
Click to collapse
Again why would you want to install the TWRP?

I am Italian and know little English I have no reference guides for your procedure ....

Frankie1975 said:
I am Italian and know little English I have no reference guides for your procedure ....
Click to expand...
Click to collapse
use google trad https://translate.google.fr/?sl=it&tl=en&op=translate

too dangerous .... with the twrp I finished the job, only the magicsk is missing, and I finished the root ..

Frankie1975 said:
too dangerous .... with the twrp I finished the job, only the magicsk is missing, and I finished the root ..
Click to expand...
Click to collapse
No need Twrp to root

and how do you install the magisk?

Frankie1975 said:
and how do you install the magisk?
Click to expand...
Click to collapse
1. Find or redownload the TGZ file for your current ROM
2. Browse inside the zip file and find boot.img under the images folder
3. Copy this file to a temporary location in your PC first, and then transfer it to your phone
4. Install the desired version of Magisk app (V23?)
5. Run the app and choose Install under Magisk
6. Choose Select and Patch a File, then select the boot.img that was transferred earlier
7. A process will run and create a new .img file in the same folder where the original one was
8. Transfer the new file to your PC in the same directory where fastboot.exe is located
9. Open a command prompt window in that same directory
10. Reboot your phone to fastboot mode and connect to PC, USB2.0 port. Check for connection by running command fastboot devices.
11. Run the command fastboot flash boot_ab magiskXXXX.img
Once it's completed, run command fastboot reboot and the phone should boot and be rooted.

thanks for the support, but I have ascertained that I have problems with USB 3.0 I think that's all the problem, I'm very close to the solution, sorry but I leave your guide alone, if I have problems I will opt for your advice. Now I try the "fastboot boot twrp.img" with USB 2.0, then I say hello

Frankie1975 said:
thanks for the support, but I have ascertained that I have problems with USB 3.0 I think that's all the problem, I'm very close to the solution, sorry but I leave your guide alone, if I have problems I will opt for your advice. Now I try the "fastboot boot twrp.img" with USB 2.0, then I say hello
Click to expand...
Click to collapse
Usb 3 is not recommended, I already told you on a previous post.

How To Guide [UPDATED] [REALME 8i/NARZO 50] How to get fastboot access and root your device easily.

Hello everyone! In this guide, I Sidharth will tell you how to flash recovery, root and access bootloader on the Realme 8i and Narzo 50, you probably have seen another guide by Pritish, it's not wrong but it became kind of outdated .
So lets begin,
Requirements:
PC (with windows or linux installed)
Platform tools installed
First unlock the bootloader by following this guide: http://telegra.ph/HOW-TO-UNLOCK-BOOTLOADER-REALME-8INARZO-50-05-08
Or this guide: https://forum.xda-developers.com/t/...-flash-twrp-and-root-rmx3151-rmx3286.4369399/ (dont worry about the boot imgs, just unlock the bootloader normally and boot the phone, don't go on the second step)
So after doing that, you should have platform tools and adb drivers installed, I am not going to tell you how to do that exactly but you should find tons of tutorials on the internet for both linux and windows. (I am going to be using Linux in this case but everything is the same for both windows and linux in this case)
Download this file: https://drive.google.com/file/d/13J2zlrUz84ZDSPERdosgNO6xdhwah4hl/view?usp=sharing
and paste it in your mtkclient folder (you should have that by now if you already unlocked the bootloader.)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Open the terminal and then type: python mtk w lk lk.bin
Now, power off your phone, hold both volume buttons and until it is done
Check if the phone boots into fastboot by holding volume down and power.
If it shows something like this then congrats, you have fastboot access now.
Flashing recovery is very easy now.
Download TWRP image from the TWRP website: https://twrp.me/realme/realme8i.html
Just keep it in the platform tools folder for now.
Boot into your phone, and download the magisk apk from here: https://github.com/topjohnwu/Magisk/releases
After downloading it, download ZArchiver from the Play Store and replace .apk with .zip and save it.
Now power off the phone and boot into fastboot/bootloader.
Open the terminal inside platform tools and:
fastboot flash recovery recovery.img
fastboot reboot recovery
You will be in your custom recovery now .
Now goto install, and select your magisk zip, and flash it normally.
After that is done, reboot to system and rename the magisk zip to apk again and install the apk.
Boom you have also rooted your device .
Thanks to Pritish for bootloader unlock guide and patched lk

also guys please let me know if you have any problems

here is how you can setup mtkclient on linux:
git clone https://github.com/bkerler/mtkclient
cd mtkclient
pip3 install -r requirements.txt
then you should have a mtkclient folder where u can execute the commands

bootloop on logo no way to fix hard to find how i can unbrick
the only thimg im able to do is on adb reflash the recovery and acces the Recovery TWRP but no way to acces the system

suauvia said:
bootloop on logo no way to fix hard to find how i can unbrick
the only thimg im able to do is on adb reflash the recovery and acces the Recovery TWRP but no way to acces the system
Click to expand...
Click to collapse
Just like bootloader unlock method, in MTK Tools, give this command:
#
python mtk e metadata,userdata,md_udc
#
(Without #)
Then connect your phone in BROM mode, then restart. it will be fine

suauvia said:
bootloop on logo no way to fix hard to find how i can unbrick
the only thimg im able to do is on adb reflash the recovery and acces the Recovery TWRP but no way to acces the system
Click to expand...
Click to collapse
be specific, did the lk file cause this or are you tryintg to unbrick through fastboot
if the lk caused this then tell me if you are on realme ui 3.0 or you are a narzo 50 user.

Sidharth09 said:
be specific, did the lk file cause this or are you tryintg to unbrick through fastboot
if the lk caused this then tell me if you are on realme ui 3.0 or you are a narzo 50 user.
Click to expand...
Click to collapse
thanks for your help but after doing so
python mtk e metadata,userdata,md_udc
nothing ha changed stil on realme logo and orange state and 5 seconds message and reloop reboot again
i was on UI 2,0 and updated firmware RMX3151 11.A_46
no idea if Lk make this
i have reflashed the stock recovery and format data also with TWRP recovery format data and cache but always on any move its a reloop reboot on Realme logo
-------
if i relock the bootloader ist possible to recover this phone and then how i can do this
im 67 old and not very used to this kind of operations

heroksiddiqi said:
Just like bootloader unlock method, in MTK Tools, give this command:
#
python mtk e metadata,userdata,md_udc
#
(Without #)
Then connect your phone in BROM mode, then restart. it will be fine
Click to expand...
Click to collapse
python mtk e metadata,userdata,md_udc
doneand nothing has changed

Is there a way to do this on a Mac? I have Realme 8i RMX3151 but do not have access to a Windows computer. Thank you.
I tried the Deep Testing App and it gives the following error "Failed to submit application. This phone model does not support deep testing."

suauvia said:
thanks for your help but after doing so
python mtk e metadata,userdata,md_udc
nothing ha changed stil on realme logo and orange state and 5 seconds message and reloop reboot again
i was on UI 2,0 and updated firmware RMX3151 11.A_46
no idea if Lk make this
i have reflashed the stock recovery and format data also with TWRP recovery format data and cache but always on any move its a reloop reboot on Realme logo
-------
if i relock the bootloader ist possible to recover this phone and then how i can do this
im 67 old and not very used to this kind of operations
Click to expand...
Click to collapse
u can always flash your stock LK again if it somehow made a problem so here
paste it in mtkclient and then
python mtk w lk lk.img
check if it fixes it!

jack1192 said:
Is there a way to do this on a Mac? I have Realme 8i RMX3151 but do not have access to a Windows computer. Thank you.
I tried the Deep Testing App and it gives the following error "Failed to submit application. This phone model does not support deep testing."
Click to expand...
Click to collapse
with mac it is not possible since mtkclient does not work on a mac

Sidharth09 said:
u can always flash your stock LK again if it somehow made a problem so here
paste it in mtkclient and then
python mtk w lk lk.img
check if it fixes it!
Click to expand...
Click to collapse
not working even worst even on fastboot it blocks about nserie decrypt or something like not remember well now i remake the process and get back to locked reboot on logo --- i would ask if i am on TWRP recovery and i want to flash a 7z firmware on .ofp files or a decrypted zip file do you think it will work ??
anyway trying to copy the 6 giigas firmware zip to an SD card the pc say that is too big to copy so maybe thru fastboot i can copt to the phone but i dont know about the command if you know about please let me know about the procedure if is positive way
or ist it any other way to recover the phone ??
finally i would like to install a Lineage customrom

suauvia said:
not working even worst even on fastboot it blocks about nserie decrypt or something like not remember well now i remake the process and get back to locked reboot on logo --- i would ask if i am on TWRP recovery and i want to flash a 7z firmware on .ofp files or a decrypted zip file do you think it will work ??
anyway trying to copy the 6 giigas firmware zip to an SD card the pc say that is too big to copy so maybe thru fastboot i can copt to the phone but i dont know about the command if you know about please let me know about the procedure if is positive way
or ist it any other way to recover the phone ??
finally i would like to install a Lineage customrom
Click to expand...
Click to collapse
finally i follow instructions on this link
[GUIDE][UNBRICK] Realme 8i/Narzo 50 Unbrick Free without Auth [RMX3151][RMX3286]
Hello everyone! So after the new mediatek DAA and SLA protection bypasses you can find github repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX3151 (Realme 8i) and RMX3286...
forum.xda-developers.com
[GUIDE][UNBRICK] Realme 8i/Narzo 50 Unbrick Free without Auth [RMX3151][RMX3286]all well now
thanks your guide to unlock the bootloader works a charm no success with other ones

Sidharth09 said:
Hello everyone! In this guide, I Sidharth will tell you how to flash recovery, root and access bootloader on the Realme 8i and Narzo 50, you probably have seen another guide by Pritish, it's not wrong but it became kind of outdated .
So lets begin,
Requirements:
PC (with windows or linux installed)
Platform tools installed
First unlock the bootloader by following this guide: http://telegra.ph/HOW-TO-UNLOCK-BOOTLOADER-REALME-8INARZO-50-05-08
Or this guide: https://forum.xda-developers.com/t/...-flash-twrp-and-root-rmx3151-rmx3286.4369399/ (dont worry about the boot imgs, just unlock the bootloader normally and boot the phone, don't go on the second step)
So after doing that, you should have platform tools and adb drivers installed, I am not going to tell you how to do that exactly but you should find tons of tutorials on the internet for both linux and windows. (I am going to be using Linux in this case but everything is the same for both windows and linux in this case)
Download this file: https://drive.google.com/file/d/13J2zlrUz84ZDSPERdosgNO6xdhwah4hl/view?usp=sharing
and paste it in your mtkclient folder (you should have that by now if you already unlocked the bootloader.)View attachment 5682939
Open the terminal and then type: python mtk w lk lk.bin
View attachment 5682941
Now, power off your phone, hold both volume buttons and until it is done
View attachment 5682943
Check if the phone boots into fastboot by holding volume down and power.
If it shows something like this then congrats, you have fastboot access now.View attachment 5682945
Flashing recovery is very easy now.
Download TWRP image from the TWRP website: https://twrp.me/realme/realme8i.html
Just keep it in the platform tools folder for now.
Boot into your phone, and download the magisk apk from here: https://github.com/topjohnwu/Magisk/releases
After downloading it, download ZArchiver from the Play Store and replace .apk with .zip and save it.
Now power off the phone and boot into fastboot/bootloader.
Open the terminal inside platform tools and:
fastboot flash recovery recovery.img
fastboot reboot recovery
You will be in your custom recovery now .
Now goto install, and select your magisk zip, and flash it normally.
After that is done, reboot to system and rename the magisk zip to apk again and install the apk.
Boom you have also rooted your device .
Thanks to Pritish for bootloader unlock guide and patched lk
Click to expand...
Click to collapse
now I cannot turn on my phone after try to access recovery :/

hoangnguyen320 said:
now I cannot turn on my phone after try to access recovery :/
Click to expand...
Click to collapse
i holded power button for 5 minutes...

hoangnguyen320 said:
i holded power button for 5 minutes..
Click to expand...
Click to collapse
volume up and power?

How to install usbdk in linux? I am using archlinux.

Sidharth09 said:
volume up and power?
Click to expand...
Click to collapse
just power , i tried all vl and pwer
and the battery was 90%

kawsarahmed369 said:
How to install usbdk in linux? I am using archlinux.
Click to expand...
Click to collapse
u dont need those for linux

Database Develop

welcome