Database Develop

P10 VTR-L29C185B165 Stack on eRecovery

Dears,
Good day to you,
I was having the Firmware P10 VTR-L29C185B165 , I downloaded the Firmware Finder after reading some topics about updating to Oreo and after that I verified one of the them with the IMEI which is ( VTR-L29C10B360A ) and was approved. I did the steps with the DNS option and I received the update massage I download it and completed the full download after 2 Patch. My phone got restarted and start the installation in the 23% field , after that my phone stack on eRecovery I tried to do the factory rest but still the same. I connected the phone with HiSuite and did the recovery steps , my phone got identified in the fastboot but no recovery available (Please take it to the nearest service center ). I took it to them they said sorry this is not under the warranty.
Can you please help me and I'm really new into this if any can simple the steps I will really appreciate it.
Regards,
Abbas

Issue solved thanks

abbas90 said:
Issue solved thanks
Click to expand...
Click to collapse
Can you tell us how you solved the problem, a lot our members have the same issue and this will be very helpful. Cheers. :fingers-crossed:

Hello, I got the same and want to try. But there seems to be two full ota versions today.
Which one to chose ?
Can you explain your problem ?
Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Envoyé de mon VTR-L29 en utilisant Tapatalk

mega180 said:
Hello, I got the same and want to try. But there seems to be two full ota versions today.
Which one to chose ?
Can you explain your problem ?
Thanks
Envoyé de mon VTR-L29 en utilisant Tapatalk
Click to expand...
Click to collapse
Have you checked the changelog? It might give you a hint on which one to choose...

Please give me steps on how you did it. Am stuck with vtr-l29c185b165
abbas90 said:
Dears,
Good day to you,
I was having the Firmware P10 VTR-L29C185B165 , I downloaded the Firmware Finder after reading some topics about updating to Oreo and after that I verified one of the them with the IMEI which is ( VTR-L29C10B360A ) and was approved. I did the steps with the DNS option and I received the update massage I download it and completed the full download after 2 Patch. My phone got restarted and start the installation in the 23% field , after that my phone stack on eRecovery I tried to do the factory rest but still the same. I connected the phone with HiSuite and did the recovery steps , my phone got identified in the fastboot but no recovery available (Please take it to the nearest service center ). I took it to them they said sorry this is not under the warranty.
Can you please help me and I'm really new into this if any can simple the steps I will really appreciate it.
Regards,
Abbas
Click to expand...
Click to collapse
Please give me steps on how you did it. Am stuck with vtr-l29c185b165. I tried using in app proxy. After i edit wifi proxy as instructed. The ota wasn't pushed. I tried dload method. Feedback was file not found. Sd card dload method. Failed. And i don't want to rebrand. Am from Nigeria. Please help

Just to clarifiy, you cannot install unapproved firmwares via firmwarefinder or other semiofficial methods. The only way to install unapproved firmwares is via the hwota method.

LwannaCM said:
Just to clarifiy, you cannot install unapproved firmwares via firmwarefinder or other semiofficial methods. The only way to install unapproved firmwares is via the hwota method.
Click to expand...
Click to collapse
it's actually the one from firmware finder

owodiran said:
Please give me steps on how you did it. Am stuck with vtr-l29c185b165. I tried using in app proxy. After i edit wifi proxy as instructed. The ota wasn't pushed. I tried dload method. Feedback was file not found. Sd card dload method. Failed. And i don't want to rebrand. Am from Nigeria. Please help
Click to expand...
Click to collapse
If i read correctly you try to rebrand by mistake, because ou have a VTR-L29C185 Device and tried to install VTR-L29C10 Firmware, which of course leads to a bricked device.
Yes, i know, the firmware was approved, but you have to rebrand it first to install this firmware you ´ve used The devices are basically all the same, but the firmwares differ from vendor to vendor.
3 Options:
1. Download the correct firmware for your device here (B360):
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2323/g1699/v125107/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...hw_meafnaf/update_full_VTR-L29_hw_meafnaf.zip
http://update.hicloud.com:8180/TDS/...07/f1/full/public/update_data_full_public.zip
Place a 3 Files in folder named dload on your sd-card and turn your phone while pressing all 3 buttons. That should trigger the forced dload method.
You can of couse choose an older version:
http://pro-teammt.ru/firmware-database/?firmware_model=VTR-L29C185&firmware_page=0 (Just click on filelist to see all 3 parts of the firmware and use FULL-OTA)
2. Use hwota and rebrand to VTR-L29C432, since you already have no warranty
https://forum.xda-developers.com/p10/how-to/huawei-p10-debrand-rebrand-update-guide-t3691013
Do the steps carefully and for god sake read everthing in the tutorial
3. Use DCPhoenix, but you have to pay for that.

LwannaCM said:
If i read correctly you try to rebrand by mistake, because ou have a VTR-L29C185 Device and tried to install VTR-L29C10 Firmware, which of course leads to a bricked device.
Yes, i know, the firmware was approved, but you have to rebrand it first to install this firmware you ´ve used The devices are basically all the same, but the firmwares differ from vendor to vendor.
3 Options:
1. Download the correct firmware for your device here (B360):
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2323/g1699/v125107/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...hw_meafnaf/update_full_VTR-L29_hw_meafnaf.zip
http://update.hicloud.com:8180/TDS/...07/f1/full/public/update_data_full_public.zip
Place a 3 Files in folder named dload on your sd-card and turn your phone while pressing all 3 buttons. That should trigger the forced dload method.
You can of couse choose an older version:
http://pro-teammt.ru/firmware-database/?firmware_model=VTR-L29C185&firmware_page=0 (Just click on filelist to see all 3 parts of the firmware and use FULL-OTA)
2. Use hwota and rebrand to VTR-L29C432, since you already have no warranty
https://forum.xda-developers.com/p10/how-to/huawei-p10-debrand-rebrand-update-guide-t3691013
Do the steps carefully and for god sake read everthing in the tutorial
3. Use DCPhoenix, but you have to pay for that.
Click to expand...
Click to collapse
oh i was actually using step 1.i never knew i wasn't going to extract. I was busy extracting the zip files
---------- Post added at 06:05 AM ---------- Previous post was at 05:56 AM ----------
LwannaCM said:
If i read correctly you try to rebrand by mistake, because ou have a VTR-L29C185 Device and tried to install VTR-L29C10 Firmware, which of course leads to a bricked device.
Yes, i know, the firmware was approved, but you have to rebrand it first to install this firmware you ´ve used The devices are basically all the same, but the firmwares differ from vendor to vendor.
3 Options:
1. Download the correct firmware for your device here (B360):
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2323/g1699/v125107/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...hw_meafnaf/update_full_VTR-L29_hw_meafnaf.zip
http://update.hicloud.com:8180/TDS/...07/f1/full/public/update_data_full_public.zip
Place a 3 Files in folder named dload on your sd-card and turn your phone while pressing all 3 buttons. That should trigger the forced dload method.
You can of couse choose an older version:
http://pro-teammt.ru/firmware-database/?firmware_model=VTR-L29C185&firmware_page=0 (Just click on filelist to see all 3 parts of the firmware and use FULL-OTA)
2. Use hwota and rebrand to VTR-L29C432, since you already have no warranty
https://forum.xda-developers.com/p10/how-to/huawei-p10-debrand-rebrand-update-guide-t3691013
Do the steps carefully and for god sake read everthing in the tutorial
3. Use DCPhoenix, but you have to pay for that.
Click to expand...
Click to collapse
i actually downloaded all the correct files. And followed instruction 1.but recovery keeps telling me to download file again that file doesn't exist. Even before when i extracted and moved update. App to dload Samething. I used sd card Samething
---------- Post added at 06:10 AM ---------- Previous post was at 06:05 AM ----------
LwannaCM said:
If i read correctly you try to rebrand by mistake, because ou have a VTR-L29C185 Device and tried to install VTR-L29C10 Firmware, which of course leads to a bricked device.
Yes, i know, the firmware was approved, but you have to rebrand it first to install this firmware you ´ve used The devices are basically all the same, but the firmwares differ from vendor to vendor.
3 Options:
1. Download the correct firmware for your device here (B360):
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2323/g1699/v125107/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...hw_meafnaf/update_full_VTR-L29_hw_meafnaf.zip
http://update.hicloud.com:8180/TDS/...07/f1/full/public/update_data_full_public.zip
Place a 3 Files in folder named dload on your sd-card and turn your phone while pressing all 3 buttons. That should trigger the forced dload method.
You can of couse choose an older version:
http://pro-teammt.ru/firmware-database/?firmware_model=VTR-L29C185&firmware_page=0 (Just click on filelist to see all 3 parts of the firmware and use FULL-OTA)
2. Use hwota and rebrand to VTR-L29C432, since you already have no warranty
https://forum.xda-developers.com/p10/how-to/huawei-p10-debrand-rebrand-update-guide-t3691013
Do the steps carefully and for god sake read everthing in the tutorial
3. Use DCPhoenix, but you have to pay for that.
Click to expand...
Click to collapse
i did not try to rebrand. I wanted to jump from vtr-l29c185b165 to vtr-l29c185b360

LwannaCM said:
If i read correctly you try to rebrand by mistake, because ou have a VTR-L29C185 Device and tried to install VTR-L29C10 Firmware, which of course leads to a bricked device.
Yes, i know, the firmware was approved, but you have to rebrand it first to install this firmware you ´ve used The devices are basically all the same, but the firmwares differ from vendor to vendor.
3 Options:
1. Download the correct firmware for your device here (B360):
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2323/g1699/v125107/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...hw_meafnaf/update_full_VTR-L29_hw_meafnaf.zip
http://update.hicloud.com:8180/TDS/...07/f1/full/public/update_data_full_public.zip
Place a 3 Files in folder named dload on your sd-card and turn your phone while pressing all 3 buttons. That should trigger the forced dload method.
You can of couse choose an older version:
http://pro-teammt.ru/firmware-database/?firmware_model=VTR-L29C185&firmware_page=0 (Just click on filelist to see all 3 parts of the firmware and use FULL-OTA)
2. Use hwota and rebrand to VTR-L29C432, since you already have no warranty
https://forum.xda-developers.com/p10/how-to/huawei-p10-debrand-rebrand-update-guide-t3691013
Do the steps carefully and for god sake read everthing in the tutorial
3. Use DCPhoenix, but you have to pay for that.
Click to expand...
Click to collapse
i got ota of vtr-l29c185b172 just now. I guess huawei hasn't forgotten us. I was surprised

[ROM] Lenovo Z6 Pro L78051 QPST | Edl way |

Dear, Since I only support Arabic, I will present the necessary files with the pictures
This Files Only For: Lenovo Z6 Pro L78051
Settings > About phone > Technical details > Model > Lenovo L78051
You Can use | Tool All In One | to Force your Device go to Edl
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Files:
Lenovo Z6 Pro L78051 ROM ZUI 11.0.483
Note:
No Need > Unlock the bootloader
https://www.zui.com/iunlock

Thanks. global rom ??

this is the chinese version with no google play but fixed bugs and real benchmark scores close to the top , for me it was easy to remove the bloatwares and install playstore and my apps
i ve already put negative review on the aliexpress seller who provided a hybrid rom claiming this to be a global release....

Guide for Lenovo Z6 Pro CH/ENG ROM flash (BIG PERFORMANCE BOOST COMPARED TO GLOBAL RO
First of all, some info
Okay guys, I’ve been struggling with this a few hours myself. I am by no means a professional. I think it’s safe to say I’m an amateur who had messed around with Android phones in the past.
As all of you may have noticed; the graphical performance and actually the general performance of the global ROM is really horrible for the Lenovo Z6 Pro. I couldn’t live with the fact that my benchmarks sucked and I felt like my phone wasn’t providing its full potential. After opening an official Lenovo forum some amazing people from the community pointed me in the right direction. Thanks Chaina and PcM_2019 for your amazing input!
The reason for this bad performance has to do with the Global ROM itself. It’s simply poorly optimized right now and receives barely any updates. I expect that in the future it will receive updates accordingly but as of right now it’s better to move over to the Chinese / English ROM.
Keep in mind there will be some Chinese apps and no Google Play in this ROM. You can add Google Play and delete most of the apps in case you’d like it better that way.
Time for the tutorial
MAKE SURE TO BACKUP ALL YOUR DATA, THIS IS A TUTORIAL FOR FLASHING DIFFERENT FIRMWARE FOR YOUR DEVICE AND IT WILL RESULT IN LOSING ALL YOUR DATA. Backup all data you wish to keep. Of course I cannot be held responsible for the loss of your data.
You will need a windows computer and a USB-C data cable.
1) Get all the required software for flashing your device to the preferred ROM.
a. First of all, the ROM itself. Because URL’s are not allowed, look on mirrors.lolinet under firmware for Lenovo L78051. It’s about a 3GB file.
b. Secondly; Qualcomm HS-USB driver.exe Boycracked has in his portfolio a a link to the Qualcomm usb driver. Google for it.
c. Lastly; the Qualcomm Flash Image Loader (QFil)
i. Androidbrick lists the latest Qualcomm flasher qfil gpst 2.7.460. Download this one!
2) We start off with the ROM. It’s a ZIP file, get 7zip or other archiving software to extract it.
3) Install the HS-USB driver – keep pressing next, don’t change anything.
4) Exctract and Install QFil. After the installation you can find the program in start by searching for “QFil”.
5) Place the extracted ROM folder in the following installation path of QFil for avoiding potential issues in the flashing process. The path should be: C:\Program Files (x86)\Qualcomm\QPST\bin. Just drop the entire folder in the bin.
6) You’re now ready for the real deal. Time to flash your device! Open QFil (search QFil in start) and follow these steps.
a. Open the configuration tab, click Firehose configuration and change device type from eMMC to UFS. Also “turn Reset After Download” on. Now press “OK”.
b. Now click “load content” Navigate to the path where you placed the new firmware, the path should be: C:\Program Files (x86)\Qualcomm\QPST\bin\L78051_CN_SECURE_USER_Q00745.01_P_ZUI_11.0.483_ST_190511_qpst and open the XML document “contents”. After this the Programmer path should be automatically filled in.
c. Now open developer options on your phone and turn on USB debugging and OEM unlocking. Change default USB configuration to File Transfer.
d. After this you can turn off your phone. When the phone is turned down completely we will now boot it into flash mode. Hold down the two volume buttons together and plug-in your USB-C data cable which is connected to your PC. QFil should now recognize your device as a COM port. The port should be automatically selected. If that’s not the case, then select port manually. You can now press the blue “Download Content” button.
e. That’s it. Your phone should now be flashed with your selected firmware.
Troubleshooting
If you were to run into problems, don’t worry you can always boot your phone normally again by holding down the power button for 10 seconds after having entered the flash mode. No damage will be done.
If QFIL gives Sahara error, go to device manager and update your COMM port drivers. Let Windows select the correct drivers automatically. Enter flash mode again and try the procedure again.
If it turns out the Sahara error is not fixed after a few attempts you could save a lot of time by using another computer, install everything on there again by following this tutorial and try it again.
If something is unclear, or you keep running into problems, let me know and I’ll try to help you to the best of my ability.
Special credits to Chaina
Additional sources that helped me put this tutorial together:
Boycracked
Mirrors.lolinet
Androidbrick

Has anyone figured out, how to fix google assistant issue in chinese rom? (default assist app is switchnig to none after deepsleep or kill process button) Turning off battery optimization or giving more permissions for google home or google services did not help.

China Official

opened a dispute with seller on aliexpress claiming the sale version as global and here is their joke answer here is no actual comparability between the evaluation software and the actual use. It is subject to actual usage. and The global version refers to language packs and channels. if i win i will take back 30usd as this amount i asked back open up all of you the same dispute , we must not tolerate this attitude and lies....

hello to all , how about twrp for this z6 pro ???
i need it bad .
thanks

help please .
i have unlocked bootloader and the global rom provided by phone seller has crashed , i have installed cn rom but no google play and my job depends on playstore apk's.
so please help with global rom for qfill or twrp and a backup of the global rom

here is the latest , i think
L78051_CN_SECURE_USER_Q00745.01_P_ZUI_11.0.542_ST_190610_qpst
https://drive.google.com/open?id=1r2oqL0jrFWO9MDMGMA6J0D-Jxd5rWryx

Background Services Off
Hi all
Firstly thanks for your efforts above! Tut was good and info too.
Since upgrading I received 2x ZUI updates and am now on the newest version.
I'm having so many problems now, my phone is a borderline frisbee!
Managed to install Google apps via Aptoide easy enough and now have everything installed.
Problem I'm having is: when closing apps; they don't run in background which means, WhatsApp's emails, etc. don't come through unless you go into the app. Secondly the settings do not save, so as mentioned above, setting the assistant also changing keyboard etc.
Does anyone know a fix? Is it worth reverting back/updating to the newest global ROM?
Please help!
Thanks

dnick88 said:
Hi all
Firstly thanks for your efforts above! Tut was good and info too.
Since upgrading I received 2x ZUI updates and am now on the newest version.
I'm having so many problems now, my phone is a borderline frisbee!
Managed to install Google apps via Aptoide easy enough and now have everything installed.
Problem I'm having is: when closing apps; they don't run in background which means, WhatsApp's emails, etc. don't come through unless you go into the app. Secondly the settings do not save, so as mentioned above, setting the assistant also changing keyboard etc.
Does anyone know a fix? Is it worth reverting back/updating to the newest global ROM?
Please help!
Thanks
Click to expand...
Click to collapse
You Need to Lock the app
Multitask button box / Lock the app

nakarmkir69 said:
help please .
i have unlocked bootloader and the global rom provided by phone seller has crashed , i have installed cn rom but no google play and my job depends on playstore apk's.
so please help with global rom for qfill or twrp and a backup of the global rom
Click to expand...
Click to collapse
Lock The boot then use this rom or another one

XQ55 said:
Lock The boot then use this rom or another one
Click to expand...
Click to collapse
Thanks for the idea, i have allready installed the latest(the one that i have posted the gdrive link above) without locking the bootloader, all the commands to lock the bootloader do not work.
The phone is working but no google play that is mandatory to install apk's from store

nakarmkir69 said:
Thanks for the idea, i have allready installed the latest(the one that i have posted the gdrive link above) without locking the bootloader, all the commands to lock the bootloader do not work.
The phone is working but no google play that is mandatory to install apk's from store
Click to expand...
Click to collapse
https://mega.nz/#F!WnIASagK!_EZg03ccDdH_BJz0EbvdbQ

XQ55 said:
https://mega.nz/#F!WnIASagK!_EZg03ccDdH_BJz0EbvdbQ
Click to expand...
Click to collapse
Thanks a lot , got all done .
Please help me to get rid of the China default apk's.
Those that are system apk's and maybe how to lock the bootloader.

On Chinese ROM, does everyone experience battery drain? Think I've gone from 35 hours to 12 now

dnick88 said:
On Chinese ROM, does everyone experience battery drain? Think I've gone from 35 hours to 12 now
Click to expand...
Click to collapse
No drain with zui i am looking for global rom "the fake one" as some people call him

Same, I went from global version 11.0.054 ST to the newest CN version 11.0.575 ST and am having so many issues:
No push notifications, unless apps left open
No location on most apps including Google maps
Battery drain
Settings do not save
On the up side, camera quality and performance is now what I paid for!
I'm hoping I can track down a global ROM newer than .054 but seems impossible at the moment..

XQ55 said:
https://mega.nz/#F!WnIASagK!_EZg03ccDdH_BJz0EbvdbQ
Click to expand...
Click to collapse
I have found some problems on zui :
Whatsapp does not notify with sound , only with popup
System default phone apk does not initiate call when touch call from recents or contacts , just increase the number of calls made.if i insert the number manually it make the call just perfect
---------- Post added at 11:01 AM ---------- Previous post was at 10:56 AM ----------
dnick88 said:
Same, I went from global version 11.0.054 ST to the newest CN version 11.0.575 ST and am having so many issues:
No push notifications, unless apps left open
No location on most apps including Google maps
Battery drain
Settings do not save
On the up side, camera quality and performance is now what I paid for!
I'm hoping I can track down a global ROM newer than .054 but seems impossible at the moment..
Click to expand...
Click to collapse
New phone new problems , i just hope that twrp and lineage or mokee will appear soon, for me is the best way allso was the stock global rom that the phone had installed when arrive but it seems that nobody have it.
Maybe someone will have it and posted here

firmware finder 10.0.0.159

Anyone had a crack at installing this yet. It says it's ok for instillation

dlevick said:
Anyone had a crack at installing this yet. It says it's ok for instillation
Click to expand...
Click to collapse
I tried but without success:
https://forum.xda-developers.com/showpost.php?p=82397809&postcount=22

braunie said:
I tried but without success:
https://forum.xda-developers.com/showpost.php?p=82397809&postcount=22
Click to expand...
Click to collapse
My original firmware P20 Pro is C432
I got it working with the following config
You need HiSuite Proxy + Hisuite
https://forum.xda-developers.com/showpost.php?p=82469033&postcount=1585
(this is not the exact link but use the keywords and id given below)
CLT-LGRP2-OVS 10.0.0.159 http://update.dbankcdn.com/TDS/data/...55/v386542/f1/
CLT-AL00-CUST 10.0.0.170(C00) http://update.dbankcdn.com/TDS/data/...55/v387582/f1/
CLT-AL00l-PRELOAD 10.0.0.4(C00R1) http://update.dbankcdn.com/TDS/data/...55/v347044/f1/
One thing that was different.
After it finished recovery, I quickly unplugged the USB before my PC could recognise my phone and before my phone finished restarting.
Possibly after phone rebooting the first time, my phone tries to send a package to hisuite but it didn't get the right response or something which causes it to have an invalid signature or something.
So yeah make sure to unplug your USB as soon as it finishes, do not wait til it rebooted

blue_panther9_9 said:
My original firmware P20 Pro is C432
I got it working with the following config
You need HiSuite Proxy + Hisuite
https://forum.xda-developers.com/showpost.php?p=82469033&postcount=1585
(this is not the exact link but use the keywords and id given below)
CLT-LGRP2-OVS 10.0.0.159 http://update.dbankcdn.com/TDS/data/...55/v386542/f1/
CLT-AL00-CUST 10.0.0.170(C00) http://update.dbankcdn.com/TDS/data/...55/v387582/f1/
CLT-AL00l-PRELOAD 10.0.0.4(C00R1) http://update.dbankcdn.com/TDS/data/...55/v347044/f1/
One thing that was different.
After it finished recovery, I quickly unplugged the USB before my PC could recognise my phone and before my phone finished restarting.
Possibly after phone rebooting the first time, my phone tries to send a package to hisuite but it didn't get the right response or something which causes it to have an invalid signature or something.
So yeah make sure to unplug your USB as soon as it finishes, do not wait til it rebooted
Click to expand...
Click to collapse
Anyone else verify this yet?

Is there a walkthrough somewhere to get this hisuite proxy to work. Having difficulties getting this to happen. Firmware finder was so much handier ?

Any attempts to root yet, or how's the status of the bootloader after 10.?
I am very tempted to try it, but it can't root, I'd rather get a new phone

blue_panther9_9 said:
My original firmware P20 Pro is C432
I got it working with the following config
You need HiSuite Proxy + Hisuite
https://forum.xda-developers.com/showpost.php?p=82469033&postcount=1585
(this is not the exact link but use the keywords and id given below)
CLT-LGRP2-OVS 10.0.0.159 http://update.dbankcdn.com/TDS/data/...55/v386542/f1/
CLT-AL00-CUST 10.0.0.170(C00) http://update.dbankcdn.com/TDS/data/...55/v387582/f1/
CLT-AL00l-PRELOAD 10.0.0.4(C00R1) http://update.dbankcdn.com/TDS/data/...55/v347044/f1/
One thing that was different.
After it finished recovery, I quickly unplugged the USB before my PC could recognise my phone and before my phone finished restarting.
Possibly after phone rebooting the first time, my phone tries to send a package to hisuite but it didn't get the right response or something which causes it to have an invalid signature or something.
So yeah make sure to unplug your USB as soon as it finishes, do not wait til it rebooted
Click to expand...
Click to collapse
Hi! Can you share a walk-through from the beginning please. I am having trouble making HISuite Proxy and Hisuite work. Every time I try I get "No internet Connection". Also I would like to how to write the Package URL, I copy the complete link upto *.zip however it only pastes uptill */f1/
Looking forward to your reply.

There is a way to do it in firmware finder post here in the forum, but you need to know that your phone will be rebranded to the Chinese firmware, so for me has no sense to do it, I can wait one month more until official release ?
kamranyusuf said:
Hi! Can you share a walk-through from the beginning please. I am having trouble making HISuite Proxy and Hisuite work. Every time I try I get "No internet Connection". Also I would like to how to write the Package URL, I copy the complete link upto *.zip however it only pastes uptill */f1/
Looking forward to your reply.
Click to expand...
Click to collapse

Luis2k33-XDA said:
There is a way to do it in firmware finder post here in the forum, but you need to know that your phone will be rebranded to the Chinese firmware, so for me has no sense to do it, I can wait one month more until official release
Click to expand...
Click to collapse
Thank you! I think I will wait for another month or two before trying the methods in the firmware finder. As I have read people have soft brink their phones trying to do it.

You must warning the people that the phone with this method is rebranded to Chinese firmware clt-l00
blue_panther9_9 said:
My original firmware P20 Pro is C432
I got it working with the following config
You need HiSuite Proxy + Hisuite
https://forum.xda-developers.com/showpost.php?p=82469033&postcount=1585
(this is not the exact link but use the keywords and id given below)
CLT-LGRP2-OVS 10.0.0.159 http://update.dbankcdn.com/TDS/data/...55/v386542/f1/
CLT-AL00-CUST 10.0.0.170(C00) http://update.dbankcdn.com/TDS/data/...55/v387582/f1/
CLT-AL00l-PRELOAD 10.0.0.4(C00R1) http://update.dbankcdn.com/TDS/data/...55/v347044/f1/
One thing that was different.
After it finished recovery, I quickly unplugged the USB before my PC could recognise my phone and before my phone finished restarting.
Possibly after phone rebooting the first time, my phone tries to send a package to hisuite but it didn't get the right response or something which causes it to have an invalid signature or something.
So yeah make sure to unplug your USB as soon as it finishes, do not wait til it rebooted
Click to expand...
Click to collapse

Used Hisuite and Hisuite proxy to move my P20 Pro CLT-L04 (Canada) to android 10.0.0.159
Everything work. I will post more about the process and effects later.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
fb

fbriere56 said:
Used Hisuite and Hisuite proxy to move my P20 Pro CLT-L04 (Canada) to android 10.0.0.159
Everything work. I will post more about the process and effects later.
fb
Click to expand...
Click to collapse
By any chance would you post the process getting it to work, cheers

Look at your private message I can't post URL because my profile is too new.
You have all the information in the private messages that I have send to you.
Screenshot for the others:
fb

Warning: Today my phone is showing as not certified.
Booting into the bootloader... I have many options now. (update via usb etc)
For now don't do it if you don't understand what you are doing.

fbriere56 said:
Warning: Today my phone is showing as not certified.
Booting into the bootloader... I have many options now. (update via usb etc)
For now don't do it if you don't understand what you are doing.
This is looking like my bootloader is unlocked now.
Click to expand...
Click to collapse
I won't do it at all so, seems like it's not worth the risk, but thank you for sending the messages.

I'm doing the update in a different way right now. Using PRELOAD and CUST from 9.1 and my region (Canada) C792.
If it work, the phone will be certified.
fb

fbriere56 said:
I'm doing the update in a different way right now. Using PRELOAD and CUST from 9.1 and my region (Canada) C792.
If it work, the phone will be certified.
fb
Click to expand...
Click to collapse
Let us know the results please. Thanks

I inatalled emui 10 on my p20 pro with you settings today and everything is working just fine.

It's normal, cause maybe 159 firmware is not out and verified from Huawei and Google, it's happened sometimes with my phone when I updated firmware through modded hisuite, let me know if your method of update with cust and preload of your region of 9.1 works
Regards
fbriere56 said:
Warning: Today my phone is showing as not certified.
Booting into the bootloader... I have many options now. (update via usb etc)
For now don't do it if you don't understand what you are doing.
This is looking like my bootloader is unlocked now.
Click to expand...
Click to collapse

@fbriere56
Did you try to root version 10?

Question [CLOSED] Pls help to fix: dm-verify corruption

For my Redmi Note 10 5G bought from Vodafone UK, initially I used Xiaomi Tool V2 (https://www.xiaomitool.com/V2/) to install the ROM, but it failed with error. After that any power on/reboot shows this error:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then I went into Fastboot and used MiFlash tool to install a ROM, that installed successfully. But each time I reboot (or fresh power on) I get the above error and the phone switches off itself. But if I press the power on within the 5 seconds, it will power on and then the phone works fine.
Although the phone works fine, any reboot doesn't work automatically, I need to press power button within 5 seconds for it to work.
Now my question is how to fix the error in the screenshot?

fm663 said:
For my Redmi Note 10 5G bought from Vodafone UK, initially I used Xiaomi Tool V2 (https://www.xiaomitool.com/V2/) to install the ROM, but it failed with error. After that any power on/reboot shows this error:
View attachment 5458547
Then I went into Fastboot and used MiFlash tool to install a ROM, that installed successfully. But each time I reboot (or fresh power on) I get the above error and the phone switches off itself. But if I press the power on within the 5 seconds, it will power on and then the phone works fine.
Although the phone works fine, any reboot doesn't work automatically, I need to press power button within 5 seconds for it to work.
Now my question is how to fix the error in the screenshot?
Click to expand...
Click to collapse
Try with:
adb disable-verity
or flashing blank/null vbmeta:
fastboot --disable-verity flash vbmeta vbmeta.img or:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash vbmeta vbmeta.img

@SubwayChamp Thank you for help. However I am getting this error:
adb disable-verity
verity cannot be disabled/enabled - USER build​
If I were do do the fastboot commands, will it wipe out the ROM+data in the phone (Note I have already been using it for last 1-2 weeks)? Also where to get the vbmeta.img file?

fm663 said:
@SubwayChamp Thank you for help. However I am getting this error:
adb disable-verity
verity cannot be disabled/enabled - USER build​
If I were do do the fastboot commands, will it wipe out the ROM+data in the phone (Note I have already been using it for last 1-2 weeks)? Also where to get the vbmeta.img file?
Click to expand...
Click to collapse
This vbmeta will work https://forum.xda-developers.com/attachments/vbmeta-tar.5065875/ (unzip it) not sure if this solves it, but it is worth the try. And not, flashing the vbmeta won't wipe your data.
I guess your device is unlocked, or maybe you did try to flash something unofficial on it being locked?, what happened prior to this appear?

SubwayChamp said:
This vbmeta will work https://forum.xda-developers.com/attachments/vbmeta-tar.5065875/ (unzip it) not sure if this solves it, but it is worth the try. And not, flashing the vbmeta won't wipe your data.
I guess your device is unlocked, or maybe you did try to flash something unofficial on it being locked?, what happened prior to this appear?
Click to expand...
Click to collapse
Initially I unlocked the phone, then installed Indonesian ROM from Xiaomi website and locked it back.
Does the phone need to be unlocked again?

fm663 said:
Initially I unlocked the phone, then installed Indonesian ROM from Xiaomi website and locked it back.
Does the phone need to be unlocked again?
Click to expand...
Click to collapse
Yes, of course, this is why the warning message is appearing. In the other hand you were lucky to not brick your device, be careful not all the firmwares are interchangeable, specifically the Chinese, to be locked.
I mean, if you only are interested in this message to disappear, you should install again the same ROM that your device was in, but the Indonesian ROM is more attractive over the Global ROM despite the bloatware that can be uninstalled easily.

SubwayChamp said:
Yes, of course, this is why the warning message is appearing. In the other hand you were lucky to not brick your device, be careful not all the firmwares are interchangeable, specifically the Chinese, to be locked.
I mean, if you only are interested in this message to disappear, you should install again the same ROM that your device was in, but the Indonesian ROM is more attractive over the Global ROM despite the bloatware that can be uninstalled easily.
Click to expand...
Click to collapse
Yes, it is the best ROM for my requirements, except I couldn't get Dual Apps to work in it. Do you know how to?
As I want to use Google Pay + NFC, thus I need it locked.
Problem now is I'll loose all data and its time consuming to install everything all over again.
Maybe I'll leave with this error as is for now, unless I find an easier way

fm663 said:
Yes, it is the best ROM for my requirements, except I couldn't get Dual Apps to work in it. Do you know how to?
As I want to use Google Pay + NFC, thus I need it locked.
Problem now is I'll loose all data and its time consuming to install everything all over again.
Maybe I'll leave with this error as is for now, unless I find an easier way
Click to expand...
Click to collapse
Strange, I used Dual apps in my RN8 exactly in Indonesian ROM (I switched from global because of the absence of Phone and Message native apps) although you are fear to, probably you need to format data in order that can work.
There are some workarounds in the Magisk thread to use GPay and NFC, although rooted.
I don't think there is an easy way because of locked bootloader.

SubwayChamp said:
Strange, I used Dual apps in my RN8 exactly in Indonesian ROM (I switched from global because of the absence of Phone and Message native apps) although you are fear to, probably you need to format data in order that can work.
There are some workarounds in the Magisk thread to use GPay and NFC, although rooted.
I don't think there is an easy way because of locked bootloader.
Click to expand...
Click to collapse
I did not know it is possible to get GPay+NFC to work while rooted. Do you not get CTS Profile mismatch error this way?

fm663 said:
I did not know it is possible to get GPay+NFC to work while rooted. Do you not get CTS Profile mismatch error this way?
Click to expand...
Click to collapse
actually all you have been asking has been discussed already, we are all busy but at least spend 10 minutes searching, vbmeta, dm-verity, nfc+Google pay all well discussed already, please spend 10 minutes by searching

simika said:
actually all you have been asking has been discussed already, we are all busy but at least spend 10 minutes searching, vbmeta, dm-verity, nfc+Google pay all well discussed already, please spend 10 minutes by searching
Click to expand...
Click to collapse
Thank you for the tips.
Maybe I am not good at searching. I have many days of searching over the last few months and did not find the answers. I have another phone Mi Mix 2 that is unlocked and few things don't work in it due to CTS Profile issue. I would like to get that fixed too. Can you point to me specific pages please? Thank you

fm663 said:
Thank you for the tips.
Maybe I am not good at searching. I have many days of searching over the last few months and did not find the answers. I have another phone Mi Mix 2 that is unlocked and few things don't work in it due to CTS Profile issue. I would like to get that fixed too. Can you point to me specific pages please? Thank you
Click to expand...
Click to collapse
sure:
ROOT GAINED !!!!
THIS METHOD WORKS on both: POCO M3 Pro / Redmi Note 10 5G hey guys.. wonderful news.. been trying here and there and IT WORKS FINALLY i gained root of POCO m3 Pro 5G ! i'll write in steps how it works and post all files i've been using...
forum.xda-developers.com
here you'll find answers about root, dm-verity and much more, always related to poco m3 pro and redmi note

fm663 said:
I did not know it is possible to get GPay+NFC to work while rooted. Do you not get CTS Profile mismatch error this way?
Click to expand...
Click to collapse
If you want to stay locked no way to disable this warning message but if you decide to unlock your device and root it, it is pretty easy to fix it, one of the methods available is what I indicated, flashing a blank/null vbmeta through specific fastboot commands, there are other methods though, but this is the most universal and easy to use.
In regard to the CTS issue, I don't use GPay, so I can't tell you, but no better place that the Magisk Discussion Thread, it is the appropriate thread where you can find all the info from all the members affected on that, in the meantime you also can take a read on this https://droidholic.com/fix-safetynet-failed-cts-profile-false/

1. Hello friends, there are two ways to fix this problem. First, you need Root, and after using Root, you need to download any file manager and give Root permission. You need to backup your baseband, nvram nvdata nvcfg after backup Save, you also need an MTK Bypass You can search for MTK Auth Bypass Tool through Google. To download, you also need to use SP Flash to flash the machine. You need to download the official firmware package. You can download it through xiaomirom.com, download the corresponding version, and use SP Flash to read your firmware package, after the reading is completed, choose to format all and download, wait for the completion, press the power button after completion, you will find that the error has disappeared, but the baseband is lost, but you have backed up. Boot through fastboot to unlock the BL lock, and proceed fastboot flash nvram ....... fastboot flash nvdata ....... fastboot flash nvcfg ....... Fastboot reboot reboot. congratulations your baseband is back, i am a newbie and my instructions are very Not comprehensive, such as where is the baseband position, but I have too many characters, I will list the baseband position. 2. Replace a new motherboard, all mobile phone problems are solved.
Hope to help you.

THREAD LOCKED
As per the Forum Rules:
5. Create a thread topic or post a message only once, this includes external links & streaming media.
-snip-
-snip-
Duplicate threads and posts will be removed
Always post in an existing thread if a topic already exists, before creating a new thread.
-snip-
Click to expand...
Click to collapse
Please search the forum for existing/similar threads before posting a new thread. For continuing discussion, kindly use the existing thread: https://forum.xda-developers.com/t/how-to-get-rid-of-dm-verity-corruption-on-boot.4290677/
Regards,
shadowstep
Forum Moderator

Question Cannot register a new fingerprint in OnePlus 10 PRO

Hi
I bought a new OnePlus 10 PRO from Aliexpress. Its a CH version that the seller installed on it a global rom.
In the first setup of the phone, When I get to setting the fingerprint, I am unable to set it. I get the following:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried updating the phone, I tried factory reset... its always the same.
Any idea?
Thanks !

Are you sure that he installed the global rom? With model is yours NE2213 ? I bought from them also but I don't have this issue.
Anyway, you can try to use Oxygen Updater, to check if there is an update for your device or since your device is reseted, you can install ColorOS back

Hi,
I am on NE2215. Using Oxygen Updater I see that I have the most up to date version.
Not sure exactly how to install ColorOS.. I do want to have the regular OS that I would have as if I bought the global version (which i guess this is what the global rom mean..)

Right, I agree with you. I recommended to install the coloros just to check if it's a compability issue.
You can try to reinstall you version and see what happens, just download it and flash it again.

ok, and now for someone that have no idea how to do it?

If yours is NE2215 A13 you can download the ota file from this link: https://android.googleapis.com/packages/ota-api/package/7548d30abac02bde85a403bcc3a218df868e1910.zip
Then put it in your phone root and from your device Settings -> About the device -> Click on the option to check for the update -> 3 dots menu -> local installation and chose this package. It will start the installation.

Thank you for your help !
Downloaded and copied into my device files.
However - When I go to "About device" and click on the "up to date" button to search for updates, it just tells me I have no updates and i see no 3 dots to go for local installation:
What am I missing?

I think it's obvious that something went wrong during the region change, this issue was prevalent on the 8 pro and was extremely difficult to fix.
Check out the 8 pro threads you'll be sure to see it. It's a partition iirc and if it's borked then it simply will not work..
I can't remember the name of it off hand but have a look and I'm sure you can get an idea of what may be wrong, specifically that partition.
Overall it's difficult to say as you've got a region changed phone, have you asked the seller what they did? If it is indeed as difficult as it was on the 8 pro to fix and seeing as you may be the only person experiencing this (far as I know) then I'd consider returning it.
You could re-flash the entire OS via fastboot enhance but that would also bring with it inherent problem's, if it's new then I guess the question you need to ask yourself is it worth it?
Did you save much money getting that converted variant?

dkaro said:
Thank you for your help !
Downloaded and copied into my device files.
However - When I go to "About device" and click on the "up to date" button to search for updates, it just tells me I have no updates and i see no 3 dots to go for local installation:
View attachment 5624305
What am I missing?
Click to expand...
Click to collapse
This page is from android play services. You need to click on the first banner

@dladz TBH I bought it for around 70% of the price I would pay locally.. So yea, it was much cheaper. I also had before OP9 global rom and had no issues with it.
Maybe indeed as last step its worth trying to reinstall everything again.. I'm just not sure how to do it. I cannot find the local upgrade option as advised above, and after googling a bit how to do it using ADB, when i try to run fastboot oem unlock - the CMD will just show me forever "< waiting for any device >" (and this is although I was able to communicate with my device using "adb devices" and I got back my device id.
@zopostyle I did click on that banner you're showing and I got to the page I showed you before..
I'm clueless

If that is the page showing I'm assuming you're on a gsi ROM and not oxygen os.
Now it's better to reinstall OxygenOS completely because it doesn't seem to be the ROM you're running.
Search here on xda to unlock your bootloader and then you need to find the zip with the full ROM for you device and install it from fastboot as mentioned.

OK, i'm trying to unlock my bootloader but as I mentioned:
dkaro said:
and after googling a bit how to do it using ADB, when i try to run fastboot oem unlock - the CMD will just show me forever "< waiting for any device >" (and this is although I was able to communicate with my device using "adb devices" and I got back my device id.
Click to expand...
Click to collapse
Any idea what am I doing wrong?
I tried several tutorials online and so far I found no tutorial that will actually give me step by step that each step is actually working..

Maybe it's missing the drivers. Try this https://gsmusbdriver.com/oneplus-10-pro

dkaro said:
@dladz TBH I bought it for around 70% of the price I would pay locally.. So yea, it was much cheaper. I also had before OP9 global rom and had no issues with it.
Maybe indeed as last step its worth trying to reinstall everything again.. I'm just not sure how to do it. I cannot find the local upgrade option as advised above, and after googling a bit how to do it using ADB, when i try to run fastboot oem unlock - the CMD will just show me forever "< waiting for any device >" (and this is although I was able to communicate with my device using "adb devices" and I got back my device id.
@zopostyle I did click on that banner you're showing and I got to the page I showed you before..
I'm clueless
Click to expand...
Click to collapse
I feel you buddy.
You can use the app in my Magisk guide to do local installs.
Unlocking the bootloader you need to type fastboot flashing unlock
I haven't had to change region myself, but I did make a thread for someone else where the process was listed, think I called it changing Chinese firmware iirc.
If it's just a case of a re-flash of the firmware you're on, it's not that difficult.
Just use oxygen updater and grab the full firmware then do the local update using the app I mentioned above (listed in my Magisk/root guide)
I've never done this when not having the bootloader unlocked personally, but you can unlock and that'll wipe your phone with the recovery already on your device.
Only issue I have going down these routes is what else is missing? Do any of these processes stand up if we can't rely on the integrity of the OS that someone has put on and made a balls of it?
Sorry I know you may not agree but 30% is a small price to pay to avoid a brick and bring stability..
But that's me

zopostyle said:
Right, I agree with you. I recommended to install the coloros just to check if it's a compability issue.
You can try to reinstall you version and see what happens, just download it and flash it again.
Click to expand...
Click to collapse
That is a seriously good shout and would explain the fingerprint.

Hi guys, thank you again for helping me.
I tried installing again the uSB drivers, and ran again "fastboot flashing unlock" - it still telling me:
As far as I understand I have to unlock it for next step, right? (either for resetting back to colorOS or reinstalling oxygen)
I will try later tonight the other method (this magisk thing) - is this the link you're talking about?
Can you please also give me a link to download the full most up to date global Oxygen version and the CH Color one? i'll try both
Thanks !

For OxygenOS there is no A13 full yet...so you have to download A12 from this link: https://gauss-componentotacostmanua...22/03/24/a9f9e7ec682744c2ba606a366df587ac.zip
Source: https://www.xda-developers.com/oneplus-oxygenos-12-android-12-update-tracker/#oneplus10pro
The chinese one is hard to find, if I find it I post the link here...
Also this thread might help you: https://forum.xda-developers.com/t/oneplus-10-pro-ne2215-rooted.4431585

zopostyle said:
For OxygenOS there is no A13 full yet...so you have to download A12 from this link: https://gauss-componentotacostmanua...22/03/24/a9f9e7ec682744c2ba606a366df587ac.zip
Source: https://www.xda-developers.com/oneplus-oxygenos-12-android-12-update-tracker/#oneplus10pro
The chinese one is hard to find, if I find it I post the link here...
Also this thread might help you: https://forum.xda-developers.com/t/oneplus-10-pro-ne2215-rooted.4431585
Click to expand...
Click to collapse
Really is odd about them not being full... They're massive compared to conventional incremental updates. 4.05GB that's a hell of an incremental.
Haven't had to do it myself and it's sightly off topic but is the full version you'd use to recover a phone albeit without a functional MSM?
So fastboot flashing?
Cheers

Hi again,
So, i'm trying to follow the tutorial here. I got stuck already in the first step - I cannot extract the boot file using Fastboot Enhance:
This is although in this link I have downloaded a full version (EU version (NE2213_11.A.13)).
What should I do next please?

dkaro said:
Hi again,
So, i'm trying to follow the tutorial here. I got stuck already in the first step - I cannot extract the boot file using Fastboot Enhance:
View attachment 5624521
This is although in this link I have downloaded a full version (EU version (NE2213_11.A.13)).
What should I do next please?
Click to expand...
Click to collapse
As @zopostyle said earlier.. you'd need to use 12 mate. As that's the only full version available...13 won't cut it...you can extract the images using the button that says allow incremental, that's useful for extracting boot images for rooting.
But there's a reason why that's there, it's so you don't go ahead and flash it.... According to @zopostyle 12 is the only full version so that's what you would need.
Again I've not done this myself so perhaps wait for someone else to chime in what to do next.