Unofficial Lineage OS 19.1 port from P20 Lite
for FIG-LX1 devices (P Smart 2018)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
Introduction:
This is the Unofficial Lineage OS 19.1 thread for the Huawei P Smart 2018 (FIG-LX1). This version of Lineage OS is a modified version of the original, containing different patches in order to make the device functional. I have made a couple of tweaks in order to boot on this device, as this rom is ported entirely from another build made for P20 lite (not made by me, credits at the end of the post).
DOWNLOAD LINKS:
ROM: Here
TWRP - Recovery: Here
GPS Patch: Here
(Only for devices running EMUI 9.1.0.405 or higher) DRM Patch: Here
GAPPS: Here
Other mentions and requirements:
You'll need a microSD card (at least 8GB).
The bootloader must be unlocked. You'll need a tool called DCUnlocker or PotatoNV (The first one is paid - around $5, the second one is free but requires you to physically open your phone). Also, you need to make sure that you are running on EMUI 8.0.0 build before JUNE 2018. Otherwise, you'll need to downgrade to an early version. I have downgraded to 8.0.0.128. I think it works with 129 too. Tutorial Here and additional info Here.
After getting the bootloader code, you'll have to put it in a safe place and upgrade again to any eEMUI 9.0.0.xxx. THIS ROM WILL NOT WORK WITH EMUI 8.0.0.xxx!!!
Also, the rom is not very stable for daily use. So, I do NOT recommend to use this ROM on your primary device! It's stable enough to be functional. (See bellow)...
INSTALLATION:
1. Download all the files (look for download section)
2. Extract the img file from the ROM zip
3. Flash system image : fastboot flash system <drag system.img here>
4. Flash TWRP image: fastboot flash recovery_ramdisk <drag twrp img here>
5. Boot into twrp: power and vol+ simultaneously while NOT connected to pc
6. Resize system: Wipe > Advanced Wipe > Check System option > Repair or Change File System > Resize File System > Swipe
7. Wipe cache, dalvik/art cache, internal storage, data
8. Copy GPS Patch, DRM Patch (see notes if you need it or not), GAPPS onto the microSD card
9. Reboot and ENJOY
Optionally, you can install Magisk via recovery by flashing the apk. Tested with the last version of Magisk, not working, cause bootloop. Further testing is required
Bugs and other problems:
Charging while the phone is powered off (atm there is no fix available)
Bluetooth pairing with code (FIX: search for Bluetooth Force Pin app)
After the first boot, there is a system crash (everything crashes) and the system is unusable. (FIX: Restart the phone)
Weak signal with some carriers (atm there is no fix available)
Other UI settings and device specific functions
Secondary camera - testing EMUI camera port for Custom ROMs (Possible FIX, not tested - GCAM)
Possibly other things
Source Code:
https://github.com/Iceows
ROM OS Version: Android 12L (12.1)
ROM Kernel: Linux Huawei 4.9.148 or Phenix 4.9.319
ROM Firmware Required: EMUI 9
Based On: Lineage 19.1
CREDITS:
https://forum.xda-developers.com/m/1960538/ ~ PHH (Huawei tweaks)
https://forum.xda-developers.com/m/8281637/ ~ eremitein
https://forum.xda-developers.com/m/3777227/ ~ TureX (kernel)
And
https://forum.xda-developers.com/m/altairfr.11572895/ ~ AltairFR (The original ROM)
THANKS EVERYONE WHO TESTED THIS ROM AND HELPED
atm no support group for this model
Screenshots
Reserved 1
Reserved 2
Hello,
does this rom work for the P smart 2020?
hello I do not understand the steps to take when I download the file it turns out that it is a 7z file
Hey, any updates or the post are dead?
kracc said:
Hey, any updates or the post are dead?
Click to expand...
Click to collapse
Hi
I have release an update for FIG-LX1 with Android 13
LeaOS-A13-20230105-iceows-google-fig.xz
LeaOS-A13-20230105-iceows-fig.xz
And new AGPS Patch
4-Huawei-AGPS-AB-v1.2-signed.zip
And a patch to fix RIL restart or not 4G data
11-Huawei-MonoSim-FIG-AB-v1.0-signed.zip
AltairFR said:
Hi
I have release an update for FIG-LX1 with Android 13
LeaOS-A13-20230105-iceows-google-fig.xz
LeaOS-A13-20230105-iceows-fig.xz
And new AGPS Patch
4-Huawei-AGPS-AB-v1.2-signed.zip
And a patch to fix RIL restart or not 4G data
11-Huawei-MonoSim-FIG-AB-v1.0-signed.zip
Click to expand...
Click to collapse
wow android 13. but i have the fig-lx3 version, will it work for me?
kracc said:
wow android 13. but i have the fig-lx3 version, will it work for me?
Click to expand...
Click to collapse
Yes
AltairFR said:
Yes
Click to expand...
Click to collapse
Wow, no bugs bro?
I have not the time to test
kracc said:
wow android 13. but i have the fig-lx3 version, will it work for me?
Click to expand...
Click to collapse
Well can you help me ? I can not flash because img is heavier than my system partition. im on a FIG-LX1 (Europe)
(i replied to the wrong comment srry)
Use my tools HWGSIPartitionti increase system size
AltairFR said:
Use my tools HWGSIPartitionti increase system size
Click to expand...
Click to collapse
I have a same error and im tried to use your tool but im getting this error in cmd : adbd cannot run as root in production builds.Im installed chainfire's adbd insecure app and adb_root magisk addon,adbd insecure will dont work and when i installed magisk addon my pc cant recognize the phone and phone is only charging(when i removed magisk addon fixed this problem).Sorry for my bad English and this is my first message on this forum.
AltairFR said:
Use my tools HWGSIPartitionti increase system size
Click to expand...
Click to collapse
Where I can download this tool??
PROUFUK said:
I have a same error and im tried to use your tool but im getting this error in cmd : adbd cannot run as root in production builds.Im installed chainfire's adbd insecure app and adb_root magisk addon,adbd insecure will dont work and when i installed magisk addon my pc cant recognize the phone and phone is only charging(when i removed magisk addon fixed this problem).Sorry for my bad English and this is my first message on this forum.
Click to expand...
Click to collapse
You can enable root adb in the developer option in settings
vfsdz said:
Where I can download this tool??
Click to expand...
Click to collapse
Search on xda
AltairFR said:
Search on xda
Click to expand...
Click to collapse
sorry but i'm new on xda and i don't know where to look for it and what it's called, sorry if it's a problem for you
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Slim ROM
For P9 Lite
DONOT COPY MY WORK, Ask for Permissions or Gather it yourself,,,
This ROM is only for Firmwares based on EMUI 5.0 only...
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm
* App failed. Please do some research if you have any concerns
* about features included in this ROM before flashing it,
* YOU are choosing to make these modifications, and if you
* point finger at me for messing up your device, i will laugh at you.
*
*/
Introduction:
What is Slim ROM ?
Features of Slim ROM:
Unique SlimRoms Features
Installation Instructions:
* -- SlimRom only supports TWRP recovery. Use any other recovery at your own risk.
* -- Slim Rom only supports EliteKernelReborn. I will not provide support for those using other kernels.
* -- Download the Latest Slim ROM 7.1.2 from 2nd Post...
* -- Delete all your Fingerprints from Stock or Elite ROM.
* -- Ensure the latest version of TWRP Recovery is installed.
* -- Ensure that Stock/unmodified P9 Lite vendor is installed... (if you are on Elite ROM, any version, you are on stock vendor)
* -- Do Complete TWRP Backup...
* -- Wipe only Data, Dalvic, Cache, System... Dont touch other Partitions...
* -- Install Slim ROM 7.1.2
* -- Install GApps (optional)
* -- Install SuperSU or Magisk (optional)
* -- Reboot with Pray
Click to expand...
Click to collapse
Bugs:
You tell me
READ FAQ in 4th Post to fix common things then post for new issues if you got one...
If You are having RIL Disconnecting issue, Please Flash your Original CUST Partition.... (Elite ROM has different Region CUST)
This took Countless hours to get ready... If you like it, Please Support by Donation
Special Thanks:
@Meticulus for creative & Endless work on Nougat & MM Codes.... Hats off bro...
@petya230 for his support
@felix-development for his support
@Abdulla7 for his support
Source Codes:
Slim ROM Source Codes
GPLv2: https://github.com/HassanMirza01/android
Contributors:
@HassanMirza01
ROM OS Version: Slim ROM 7.1.2
ROM Kernel: EliteKernelReborn v4+ Upstreamed to 4.1.26
ROM Firmware Required: Bootloader Unlocked / TWRP / EMUI 5.0 Firmware
Based On: Slim ROM
Version Information:
Status: Stable
Created on: 2017-12-02
Last Updated on: 2017-12-02
Download Links:
Slim ROM:
Slim-7.1.2-20171201-hi6250-UNOFFICIAL-HassanMirza01
All my ROMs are available on my Blog too,,, HassanMirza01.blogspot.com
Elite TWRP Project
Press Thanks and donate if you like it
CHANGELOG:
2017-12-02 Slim-hi6250-7.1.2-20171202-UNOFFICIAL:
*initial release
FAQ:
1.) What to do if My Phone got bootloop or not booting ??
You have changed vendor, or modified vendor(not stock), OpenKirin vendor will never ever work,, so get Pure stock vendor of your device... it will work for sure... if still not, change you data filesystem...
2.) What to do if my SIMs are not working ??
Go to Extras, disable dual sim, reboot phone,, now read carefully,,
1. Install hex editor app from playstore
2. Make sure you have file explorer with root privileges
3. Open hex editor and find modem,id file on this location root/sys/firmware/devicetree/base/hisi,modem_id and open it.
4. Write down all numbers in first row
5. Then go to root/system/vendor and find phone.prop and open it with text editor.
6. Find your modem id by using search and type 0x3xxxxxx where X is your number from hex reader
7. Then make it look like this:
3.) What to do if my SafetyNet is not passed ??
Update Magisk to latest beta version, tick Magisk Hide and enable usb debugging...
reserve4
let the party begin [emoji14]
Gesendet von meinem HONOR-6X mit Tapatalk
Downloading......
Hey, I have the rom. I am not able to use my sim card, and i did all the steps, i reboot twice... What more could i do?
Edit: I come to this rom into EMUI 5 single sim version, L31.
Everything is working for me very well, thanks Hassan.
SrAlePika said:
Hey, I have the rom. I am not able to use my sim card, and i did all the steps, i reboot twice... What more could i do?
Edit: I come to this rom into EMUI 5 single sim version, L31.
Everything is working for me very well, thanks Hassan.
Click to expand...
Click to collapse
Add ur modem support as instructed...and disable the dual sim from extra menu...it should work then...
Does it work with Pralx1c432 p8 lite 2017
HassanMirza01 said:
Add ur modem support as instructed...and disable the dual sim from extra menu...it should work then...
Click to expand...
Click to collapse
I did it carefully, still with the same problem.
I dont know how to disable dual sim from extra menu, could you tell me how to do?
Thanks again
SrAlePika said:
I did it carefully, still with the same problem.
I dont know how to disable dual sim from extra menu, could you tell me how to do?
Thanks again
Click to expand...
Click to collapse
go to settings and then extras... there are many options
i just got a bootloop, i think it's because my vendor.img but i don't find the stock img for my model, anyway the vendor.img from hyperactive rom it's good?
De4Su said:
i just got a bootloop, i think it's because my vendor.img but i don't find the stock img for my model, anyway the vendor.img from hyperactive rom it's good?
Click to expand...
Click to collapse
hyperactive rom using openkirin vendor,,, which will never ever boot with it,,, i will soon post stock vendor for all... use stock vendor,, get from ur stock rom,,, or flash elite rom nd vendor will get install automatically,,, or install stock rom then this rom,,,
okay so i flashed elite rom and then i made a reboot into recovery, i wiped Data, Dalvic, Cache and System and after i flashed slim rom, gapps 7.1 arm64 and magisk latest beta version but still i'm in bootloop, i'm doing wrong?
De4Su said:
okay so i flashed elite rom and then i made a reboot into recovery, i wiped Data, Dalvic, Cache and System and after i flashed slim rom, gapps 7.1 arm64 and magisk latest beta version but still i'm in bootloop, i'm doing wrong?
Click to expand...
Click to collapse
flash without magisk
dyller said:
flash without magisk
Click to expand...
Click to collapse
finally it booted up, now i must fix the sim card and it will be perfect, what magisk version should i use for slim rom?
De4Su said:
finally it booted up, now i must fix the sim card and it will be perfect, what magisk version should i use for slim rom?
Click to expand...
Click to collapse
I use only super su for elite rom,work fine for me
Hi Hassan, This is the 1st rom from you, That I can flashed & used successfully without any problem (just need to reboot recovery & format data, after flash this rom). All are going well/Smooth.
I don't have so many big big requirements.
I have some noob questions,
double tap on status bar to sleep,
quick panel row & column setting,
Add quick panel setting icon like screen timeout.
Add quick panel setting icon Reboot normal/recovery
multi Reboot option in power button
Is this are only in RR rom? Or how can I do this in this rom?
Thanks again for your hard work.
Anonda said:
Hi Hassan, This is the 1st rom from you, That I can flashed & used successfully without any problem (just need to reboot recovery & format data, after flash this rom). All are going well/Smooth.
I don't have so many big big requirements.
I have some noob questions,
double tap on status bar to sleep,
quick panel row & column setting,
Add quick panel setting icon like screen timeout.
Add quick panel setting icon Reboot normal/recovery
multi Reboot option in power button
Is this are only in RR rom? Or how can I do this in this rom?
Thanks again for your hard work.
Click to expand...
Click to collapse
Find those options in settings, interface
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is Omnirom ?
Selinux Status:
Enforcing
Instructions :
Follow this Steps by steps
How to have lastest FW on both slots:
Reboot to bootloader
fastboot boot twrp-*****-I01WD.img
Flash stock
Reboot to bootloader again
fastboot boot twrp-*****-I01WD.img
Flash Stock again
reboot to system.
What's our Microg Build ?
GitHub - omnirom/android_prebuilts_prebuiltapks
Contribute to omnirom/android_prebuilts_prebuiltapks development by creating an account on GitHub.
github.com
First Install
* Download Rom (GAPPS or MicroG) , TWRP
* REMOVE ALL FINGERPRINT/LOCKSCREEN SECURITY in your current ROM
* reboot to bootloader
* fastboot boot twrp-*****-I01WD.img
* flash omnirom.zip
* In TWRP Advanced menu, choose flash Current TWRP for it as permanent
* reboot recovery
* Wipe USERDATA (by type yes)
* flash Magisk (optional)
* reboot and profite
Update for unofficial release
* reboot to recovery
* flash omnirom.zip
* If you want a permanent twrp, flash twrp-*-mauronofrio-installer.zip
* reboot recovery
* flash GAPPS
OTA (For official)
Use OTA inside rom for updates. nano gapps backup included.
if u did something else. we dont need/wanna know about it in the thread
Device Maintainers
@micky387
Download:
Gapps Version
MicroG Version
Official TWRP
Telegram Group:
Official OmniROM Community
Omnirom Zenfone6/6Z
Source Code
Omnirom
Omnirom gerrit
XDA:DevDB Information
Omnirom for Zenfone6 (2019), ROM for the ASUS ZenFone 6 (2019)
Contributors
micky387
Source Code: https://github.com/omnirom
ROM OS Version: 13.0
ROM Kernel: Linux 4.14.170
Version Information
Status: Stable
Created 2019-11-07
Last Updated 2022-11-16
for me
for me
You mention it's a WIP, but what exactly doesn't work so far?
MishaalRahman said:
You mention it's a WIP, but what exactly doesn't work so far?
Click to expand...
Click to collapse
Hello man.
Sound still in wip as you can see on slack. All working, excepted headphone jack.,reported an user
https://github.com/zs630kl/android_...mmit/cbd04b798205ee9683ef628ff5cbbe6d29b2fc28
But the most important for me, it's in permissive mode atm. I'm working on it and add an update tomorrow.
micky387 said:
Hello man.
Sound still in wip as you can see on slack. All working, excepted headphone jack.,reported an user
https://github.com/zs630kl/android_...mmit/cbd04b798205ee9683ef628ff5cbbe6d29b2fc28
But the most important for me, it's in permissive mode atm. I'm working on it and add an update tomorrow.
Click to expand...
Click to collapse
Fixed
Changelog 2019-11-08
* Selinux Enforcing
* Fix some Permission about Theme Picker
* Sound working good now...
Click to expand...
Click to collapse
micky387 said:
Fixed
Click to expand...
Click to collapse
Does this ROM support stereo speaker output?
troy5890 said:
Does this ROM support stereo speaker output?
Click to expand...
Click to collapse
yes ofc
Installed following the instructions, but has been sitting at the omniom boot screen for several minutes
SirLoinOfBeef said:
Installed following the instructions, but has been sitting at the omniom boot screen for several minutes
Click to expand...
Click to collapse
Hi,
So if your follow my OP and wipe your internal storage, no issue.
Just if i read your comment on Official twrp, it's an issue of Magisk, not ROM
Use last MAgisk as said another user
MystikMan97130 said:
Thanks i have root with this on android 10 (Magisk 20.1)
edxposed not work (show it's actived) both YAHFA & SANDHOOK
Click to expand...
Click to collapse
Hello. Sorry for my language, but i have question. is this rom will work witch nova launcher?
Szczur86 said:
Hello. Sorry for my language, but i have question. is this rom will work witch nova launcher?
Click to expand...
Click to collapse
yes
Hi guys
New Build and Official is here
Changelog 2019-12-08
* FIx 3.5 Audio Jack
* Fix audio in some applications
* Add back FM radio
* Official release
* And lot of more.....
have a nice Sunday
Which version is magisk should we install? Also just to confirm, we should unlock the bootloader before doing everything right?
---------- Post added at 01:17 PM ---------- Previous post was at 01:13 PM ----------
SirLoinOfBeef said:
Installed following the instructions, but has been sitting at the omniom boot screen for several minutes
Click to expand...
Click to collapse
So did you find what happened, did your phone started working properly?
It turned out the wipe userdata command had failed. All fixed now.
SirLoinOfBeef said:
It turned out the wipe userdata command had failed. All fixed now.
Click to expand...
Click to collapse
Also just few questions. Did you come from a stock rom? Which version of magisk did you install, If you had installed one. We need to unlock the bootloader right.
aadeshiscool said:
Also just few questions. Did you come from a stock rom? Which version of magisk did you install, If you had installed one. We need to unlock the bootloader right.
Click to expand...
Click to collapse
Which version of magisk did you install?
20.1+
We need to unlock the bootloader right?
yes for both magisk and custom rom
Data Roaming not working
Thanks for this ROM, I really like it. I've recently switched from LineageOS, mostly because data roaming wasn't working. Interestingly, it doesn't work with Omnirom either. LineageOS was still Pie, this being Q, the two versions shouldn't have much in common. It appears data roaming isn't quite straight forward on this phone. I've attached a logcat with the IMS messages (in between some audio clutter). I'd be very greatful for any suggestions how to solve this.
UsernameShortage said:
Thanks for this ROM, I really like it. I've recently switched from LineageOS, mostly because data roaming wasn't working. Interestingly, it doesn't work with Omnirom either. LineageOS was still Pie, this being Q, the two versions shouldn't have much in common. It appears data roaming isn't quite straight forward on this phone. I've attached a logcat with the IMS messages (in between some audio clutter). I'd be very greatful for any suggestions how to solve this.
Click to expand...
Click to collapse
Hi,sorry for the delay but busy with all these end of year celebrations.
Do you try with last Official release ? I've updated the CarrierConfig for all variant.
regards
Thanks for looking into this. Unfortunately it still doesn't work even with the latest version (OTA 20191229). I'm thinking it's something unusual specific to this phone, since LineageOS has the same problem.
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[SIZE="4"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/SIZE]
Features
Click for feature list (helps shorten the OP.)
Always Have a full functional Backup. Just in case!
DOWNLOAD:
ROM -Google Drive
ROM -Sourceforge
TWRP
GAPPS
First time installing crDroid to your Sony Xperia XA2, or coming from another ROM:
** Make sure you're running a proper working Recovery (CWM or TWRP)
1) Copy crDroid zip, gapps zip to your device(sd-card)
2) Boot into Recovery
3) Wipe cache, system, & data (or just cache & system for a dirty flash).
4) Flash ROM
5) Reboot into Recovery again
8) Flash gapps
9) Boot up
For root, AFTER you boot into the ROM, you can go back to recovery and install Magisk XX.x (whatever is most recent).
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
KNOWN ISSUES
LIST-KNOWN-ISSUES-ON-YOUR-DEVICE-HERE
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed!
- have modified system files
Thanks to:
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
DONATE
(This is link is not for OP. It's for CrDr-team. Ehhh... if u wanna say thx for adoptable rom for your device, just write me in pm, ok? ^.^)
crDroid G+ community
XDA:DevDB Information
[ROM][10.0][UNOFFICIAL]crDroidAndroid v6.3[Pioneer], ROM for the Sony Xperia XA2
Contributors
SGS3_0
Source Code: https://github.com/crdroidandroid
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Version Information
Status: Testing
Created 2019-12-06
Last Updated 2020-03-05
reserved
You should use 50.2.* fw before flashing this rom!
More info here:
https://forum.xda-developers.com/showpost.php?p=78973496&postcount=2
Great Work！
Nice Work, every thing works great
Security patch : 5 December
hi, I want to give this a try.
I come from a clean downgraded XA2 (h3113) from 9 to 8.1, so the bootloader is already unlocked and the phone is rooted with TWRP and Magisk installed. I did the downgrade with Emma tools.
My firmware version is 50.1.A.
Do I have to re-install the Pie 9 update first in order to flash this rom ?
Or can I just flash it and then reboot to recovery, flash the gapps and reboot to recovery and flash the latest firmware from here : https://forum.xda-developers.com/showpost.php?p=78973496&postcount=2
boemien said:
Do I have to re-install the Pie 9 update first in order to flash this rom ?
Click to expand...
Click to collapse
Need Sony firmware ("at least bluetooth, dsp, modem from it") from Pie. As Luk said.
It would be better to update (install) the stock rom (Pie) first.
I have not tested this with Android 8.1-stock. I can not promise the right work and compatibility.
Saint-Gazatus said:
Nice Work, every thing works great for an hour or so, then the UI crash and I need to reboot. I'll try to give you a logcat or some logs (No Gapps, no magisk, no SU)
Security patch : 5 November
Click to expand...
Click to collapse
Ok, do them. I do not observe such problems yet. My phone has been working since the last power-up for more than 122 hours ...
update sources&rebuild
hello ... and many thanks for the work ... understood everything so far but a few days ago an update from crdroid came but unfortunately I don't know anything about mm before recovery and so on ... and had to do everything again on mine Do xa2 sony on it and now the update is gone ... should I just wait until the update comes back or do I have to do something else ???
Chwdp777 said:
hello ... and many thanks for the work ... understood everything so far but a few days ago an update from crdroid came but unfortunately I don't know anything about mm before recovery and so on ... and had to do everything again on mine Do xa2 sony on it and now the update is gone ... should I just wait until the update comes back or do I have to do something else ???
Click to expand...
Click to collapse
chek for updates again?
any new build planned for jan 2020 security patch and 17.1 ?
Saint-Gazatus said:
any new build planned for jan 2020 security patch and 17.1 ?
Click to expand...
Click to collapse
Yes, soon.
Someone can tell me, what is a reason eisting this 3 icons with android logo, if I don`t install anything more than bank app and gouverment app from Google Play? After clean install (3 weeks ago )they doesn`t exist.
https://forum.xda-developers.com/attachment.php?attachmentid=4936249&stc=1&d=1580094543
iHusky said:
Someone can tell me, what is a reason eisting this 3 icons with android logo, if I don`t install anything more than bank app and gouverment app from Google Play? After clean install (3 weeks ago )they doesn`t exist.
https://forum.xda-developers.com/attachment.php?attachmentid=4936249&stc=1&d=1580094543
Click to expand...
Click to collapse
That's pretty normal I think. When I'm first using Android 10's based ROM, it showed up on my phone. After using a few weeks, it was gone. When I tap "App Info", it led me into a google playstore (if you have one) and it literally doesn't show anything.
Hi!
I really like you roms, they add to the XA2. But a question - is there a possibility that you could compile versions without recovery, or with TWRP, instead of the stock one? TWRP is just that much more functional, and now after the flash, i need to reflash the TWRP, and only then carry on with gapps, and the rest..
Just asking, no big deal I'm still VERY grateful for your work!
Rom installed, everything works but the wifi keep switching to my data even if there's connection and signal (with stock firmware there was no problem on this side), other than this: is there any plan to release some updates? On the crdroid site the rom is "unmaintained"
Updated sources and rebuild
Callozz said:
Rom installed, everything works but the wifi keep switching to my data even if there's connection and signal (with stock firmware there was no problem on this side), other than this: is there any plan to release some updates? On the crdroid site the rom is "unmaintained"
Click to expand...
Click to collapse
My PC was broken and I could not compile new versions. Gabriel kicked me from maintainers. I've messaged him in telegram yet. New OTA-updates will be soon.
error when i install ggap
anybody can help me !!!
i Installed the rom successfull but when i started with gapp was not working. the logo is sitl running a long time..
can you help me solve the problem
Dctruc said:
anybody can help me !!!
i Installed the rom successfull but when i started with gapp was not working. the logo is sitl running a long time..
can you help me solve the problem
Click to expand...
Click to collapse
what gapps u installed?
how do u did it?
take a log from boot system for debug.
1)stable gapps here(micro or nano): https://sourceforge.net/projects/opengapps/files/arm64/
2)instal em before system booting! (it's important):
a)boot in twrp
b)install rom
c)reboot twrp again
d)install gapps
e)boot system, done.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*** Disclamer
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this ROM
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
A lot.
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/10.0/README.mkdn
Flashing Instructions:
Pre-installation:
Recovery
Opengapps nano (Download from here)
Magisk 20 or newer for root (after first boot) - (Download from here)
First time installation:
Backup your data to PC, OTG flash drive
Flash recovery and boot to recovery
Wipe system, data, cache and format data, then reboot to recovery
Copy crDroid and Gapps to internal memory then flash them in TWRP in same order
Reboot and enjoy
*Optional reboot again after first boot to flash Magisk for root
Update installation:
Boot to recovery and make a backup
Wipe system and cache
Flash updated crDroid and Gapps (and Magisk if you had this as root method)
Reboot and enjoy
Sources:
ROM: https://github.com/crdroidandroid
Kernel source: https://GitHub.com/yilliee/bluefly_a10
Download:
ROM https://downloads.sourceforge.net/p...31/crDroidAndroid-10.0-20210426-m31-v6.17.zip
RECOVERY https://downloads.sourceforge.net/project/lmao-kit/Crdroid-a10-m31/recovery.img
Notes:
• Need to be on OneUI2.5 ATJ9 firmware.
• If you get the message of an internal problem with your device change ro.treble.enabled=true to false in build prop (credits to @menoob2)
Changelog:
• April security patch.
• Vanilla Build
• Bluefly Kernel for Android 10.
Known issues :
Cts profile(Magisk safety net)
Dt2w
Bluetooth calls
Proximity sensor for call
Hit the thanks button guys if you like my work
Contributors
@LMAO-guy @Yillié @ErukunBAKA @hendramanu
ROM OS Version: 10.0 Q
ROM Kernel: Linux 4.9
Status: Stable
Created 2021-04-27
Screenshots
Spoiler: Screen shots
Reserving post no.1 for Changelog wen?
Also why magisk only after first boot??
Anyways good work sar.
Nice!
Finally New Custom Rom
Is it possible to lower the resolution for applications
ensonahmet said:
Is it possible to lower the resolution for applications
Click to expand...
Click to collapse
Open termux
Type su
Type wm size _______ (it will change ur resolution which u want to change )
Type wm density ______ (it will change ur pixel density)
but there was a game adjuster program, we were lowering the application resolutions.
Game Tuner
ensonahmet said:
Game Tuner
Click to expand...
Click to collapse
Yes u can
Game.Optimizing.Service.v.1.1.95.2.b.119500002.resigned.apk in this version
Is Game Tuner installed?
Volte bro?
Yadhevdev66 said:
Volte bro?
Click to expand...
Click to collapse
Sorry no volte support in exynos custom roms and gsi except one ui ported roms
Will it pass CTS/SafetyNet?
sammorrison said:
Will it pass CTS/SafetyNet?
Click to expand...
Click to collapse
No sir not fixed it yet
LMAO-guy said:
No sir not fixed it yet
Click to expand...
Click to collapse
Also, does it have random reboot issues with Magisk? Can Magisk's SafetyNet patch be used in this ROM?
sammorrison said:
Also, does it have random reboot issues with Magisk? Can Magisk's SafetyNet patch be used in this ROM?
Click to expand...
Click to collapse
Magisk safety net is the issue it brings random reboots i am working on it to fix it
If u fix it plz be kind to inform me
hendramanu said:
Nice!
Click to expand...
Click to collapse
What recovery it is?
Atharkhan101 said:
What recovery it is?
Click to expand...
Click to collapse
It is crdroid recovery u can use twrp instead of this no issues
LMAO-guy said:
It is crdroid recovery u can use twrp instead of this no issues
Click to expand...
Click to collapse
Thank you. Could you please give me link for TWRP as the Official TWRP app doesn't list TWRP for this M31
Atharkhan101 said:
Thank you. Could you please give me link for TWRP as the Official TWRP app doesn't list TWRP for this M31
Click to expand...
Click to collapse
Join m31 telegram groups we have all stuff u want .....
Twrp for Q
67.81 MB file on MEGA
mega.nz
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
An essential tool for anybody that loves to modify their Android device is a good custom recovery. TWRP has been around since the invention of the wheel back in 1996 and has been providing modders with all kinds of great tools.
Okay so..I managed to compile TWRP 3.6.1-9.0 finally for this device. I started with stock recovery kernel which obviously didn't work due to the "unsupport". So after a month, I tried @djeman's TWRP 3.2 OREO kernel which worked, maybe it had a feature which booted it up. But Android Oreo will never work on our device. Thanks to @NMTdontknow who tested my TWRP
Code:
/*
* Your warranty is... still valid?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this RECOVERY
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
IMPORTANT!!!!!!!!!
If you have SM-J320FN/F/G/M, flash the J3XLTE twrp image!
If you have SM-J320H, flash the J3X3G twrp image!
Installation instructions
Spoiler
Turn off your phone
Restart it in download mode by keeping volume down + home + power
Confirm the entry in the download mode with volume up
Plug your phone into your PC and run Odin (you should see the COM port in blue)
Click on AP and select the .tar recovery file
Click on options (Disable checkbox Auto Reboot) and leave only "F. Reset Time"
Click Start
(Your device will not restart automatically this is voluntary because otherwise the original rom will erase TWRP.)
To restart it keep down volume down + home + power as soon as it goes off restart it on recovery by keeping it up volume up + home + power
When you boot for the first time on recovery, it will prompt you to change the language and avoid deleting the recovery.
Note: For this device it is necessary to have enabled OEM Unlock in:
Settings -> Developer Options -> OEM unlocking
Or you may encounter "BLOCKED BY FRP LOCK" on boot.
Known issues:
Spoiler
MTP (SM-J320H)
CPU temperature doesn't show up (SM-J320H)
Download:
Spoiler
Below attachments!
Credits:
Spoiler
@NMTdontknow for testing the TWRP
@djeman for the Oreo kernel and the work for this device
4PDA user Mr.Precise for testing my TWRP builds for SM-J320H
Me for making TWRP
TeamWin
OmniROM
LineageOS
Device-specific tree:
Spoiler
SM-J320FN/F/G/M: https://github.com/NotNoelChannel/twrp_device_samsung_j3xnlte
SM-J320H:
Spoiler
https://github.com/unlegacy-devices/android_device_samsung_j3x3g
Hi,
It's not really oreo that don't works on the j3 but I never found a compatible gpu driver ...
Android have modified deeply the gpu driver interface on oreo and the driver is not open source.
So I abandonned but all the boot sequence was good only this driver was missing.
Thanks for the new recovery
djeman said:
Hi,
It's not really oreo that don't works on the j3 but I never found a compatible gpu driver ...
Android have modified deeply the gpu driver interface on oreo and the driver is not open source.
So I abandonned but all the boot sequence was good only this driver was missing.
Thanks for the new recovery
Click to expand...
Click to collapse
Hey djeman, I didn't except that you are going to comment here lol!
You're welcome for the recovery! I might try to bringup other recoveries like PBRP(Pitch Black Recovery Project) and OFRP(OrangeFox Recovery Project)
I can confirm that it works. The touch is simulating a mouse however, I think. The click action is weird. But usable.
Also, both recovery images work just fine on my device, I actually do not know which of the 2 variants my phone is. I think they are pretty much the same so you can just offer one recovery for both. If the device has the nfc chip soldered on or not should not matter for the recovery.
L3P3 said:
The touch is simulating a mouse however, I think. The click action is weird. But usable.
Click to expand...
Click to collapse
Yip, this is an issue because this device tree "has been ported" from j3lte (Snapdragon variant of the J3 2016) . I guess that's why the click action is weird
notnoelchannel said:
Yip, this is an issue because this device tree "has been ported" from j3lte (Snapdragon variant of the J3 2016) . I guess that's why the click action is weird
Click to expand...
Click to collapse
Already did figure out why it is lagging. Making test builds to make sure the click isn't weird anymore
Fantastic! I will enjoy it in 10 years then when some retro computing geek finally creates a new rom for it.
New update!
Status: built-from-source
Updates:
- Sync latest TWRP sources
- Fix lags
- Fix MTP
You can find the update in OP below attachments
New update! 2022-04-17:
Changelog:
* Fixed recovery.fstab, you can install any roms without crash now!
* Added custom LUN path
* Added EFS, OTG, Micro SDcard, preload and etc stuff on recovery.fstab
You can download below attachments
New update! 2022-05-01:
Changelog:
* Happy Mothers Day!
* Synced latest sources
* Updated to omni branch twrp-6.0
You can download the recovery below attachments
New update! 2022-05-06:
Changelog:
* Updated recovery.fstab
* Modified device tree to not cause any crashes
* Added F2FS/ext4 support
* Added PERSIST partition (Means you can install any ROMs without crashes on SM-J320FN/F)
* Updated sources
You can download the recovery below attachments
should I try to bringup cyanogen recovery?
notnoelchannel said:
should I try to bringup cyanogen recovery?
Click to expand...
Click to collapse
++++ yes
notnoelchannel said:
should I try to bringup cyanogen recovery?
Click to expand...
Click to collapse
I ported it but it doesn't work stably
ALEKSKART said:
I ported it but it doesn't work stably
Click to expand...
Click to collapse
because if you port from Lenovo A1000 it won't work fine
djeman said:
Hi,
It's not really oreo that don't works on the j3 but I never found a compatible gpu driver ...
Android have modified deeply the gpu driver interface on oreo and the driver is not open source.
So I abandonned but all the boot sequence was good only this driver was missing.
Thanks for the new recovery
Click to expand...
Click to collapse
why can't we use software rendering tho? BUT because of our processor it would be VERY slow
2022-06-07:
Changelog:
- Added TWRP 3.6.1-9 support for SM-J320H . !!!TESTING NEEDED!!!
You can download TWRP in the OP (there's no update for SM-J320FN/F/etc for now)
New update is up!
Changelog:
- Rebrand to TWRP 3.6.2-9.0
- Removed TWRP 3.6.1-9's download link for SM-J320H due to not fitting partition for now.
You can download the recoveries below the OP.
up
Hello dev, TY for this recovery. I have a problem with latest version (sm-j320fgm-twrp-3.6.2-20220614) The sdcard can't be mounted. TWRP treat it as if it were the internal storage. So, when I try to mount the sdcard, the internal storage is mounted instead. Also despite the file manager shows "sdcard", it access to internal storage. Finally the "/storage" folder is missing. Testing in SM-J320M.