tried to update using sd card and oreo update after doing factory reset.
1. was on stock 2BQK2
2. downloaded BQK2 (N OS) to CQL1 (OREO).zip added to sd
3. did fsactory reset from recover
4. then went up to update from recovery. ran the file above.
5. when i rebooted i get stuck on boot screen
steps taken.
1. hold down bixby and up volume then power ....does nothing
2. hold down just power does nothing
3. hold down bixby vlume up and power does nothing
4. hreboots back yo boot screen then stops on boot screen
5. hold down volume then power 7 seconds until screen turns black and just before she reboots i let go of volune down and power then immidiately hold down volume again without power button, this seems to torn off phone.
so as you see i cant get into download, recovery or safe mode. just start to boot screen or off
please i know i want to odin stock filmware back but cant seem to get phone into download mode.
i,m tired and most likly nissed an important step help please.
I do no see where you tried download mode... Hold volume down bixby and power for about 2min. That will get you to download
Ok I can get it in download mode
I get Odin to recognize.
Fill up the slots
BL
AP
CL
CSC?
USM
Using latest Verizon .
I eitther get stuck on setup initialize or
Update fail.
pospower said:
Ok I can get it in download mode
I get Odin to recognize.
Fill up the slots
BL
AP
CL
CSC?
USM
Using latest Verizon .
I eitther get stuck on setup initialize or
Update fail.
Click to expand...
Click to collapse
if you get stuck at setup connection or initialize try a different usbport/cable/computer
My Tab S2 T713 is currently running the latest stock Samsung rom. I want to install Lineage 15.1
I've downloaded twrp-3.2.1-0-gts28vewifi.img.tar & Odin 3.12.7. I can boot into download mode, flash TWRP with Odin which says success & my tablet reboots normally. When I power down & reboot into recovery TWRP gets over written by the stock recovery.
If I uncheck Auto Reboot in Odin, after flashing success, I'm still in download mode - I've read that I need to boot directly into recovery from download mode - how do I do this?
In download mode pressing home + voldown + power reboots normally. Pressing home + volup + power does nothing
What am I doing wrong?
Gidders said:
My Tab S2 T713 is currently running the latest stock Samsung rom. I want to install Lineage 15.1
I've downloaded twrp-3.2.1-0-gts28vewifi.img.tar & Odin 3.12.7. I can boot into download mode, flash TWRP with Odin which says success & my tablet reboots normally. When I power down & reboot into recovery TWRP gets over written by the stock recovery.
If I uncheck Auto Reboot in Odin, after flashing success, I'm still in download mode - I've read that I need to boot directly into recovery from download mode - how do I do this?
In download mode pressing home + voldown + power reboots normally. Pressing home + volup + power does nothing
What am I doing wrong?
Click to expand...
Click to collapse
https://forum.xda-developers.com/tab-s2/development/twrp-3-0-2-1-galaxy-tab-s22016-sm-t713-t3390627
Instructions:
Flash with ODIN 3.10.7 in the AP slot.
Put your device in DOWNLOAD mode.
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME.
You should now see TWRP recovery.
Brilliant - thank you. Why they can't have they have that in the Lineage install instructions?
Now running Lineage 15.1 = happy bunny
boxcar8028 said:
https://forum.xda-developers.com/tab-s2/development/twrp-3-0-2-1-galaxy-tab-s22016-sm-t713-t3390627
Instructions:
Flash with ODIN 3.10.7 in the AP slot.
Put your device in DOWNLOAD mode.
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME.
You should now see TWRP recovery.
Click to expand...
Click to collapse
For the love of god, thank you. This wasn't in the LineageOS instructions. But I still can't install it, it says my bootloader isn't supported (T713XXU1APG1).
notmyidea said:
For the love of god, thank you. This wasn't in the LineageOS instructions. But I still can't install it, it says my bootloader isn't supported (T713XXU1APG1).
Click to expand...
Click to collapse
Did you go into your developer settings and make sure you toggled the option titled "OEM Unlock"?
sh0nuff said:
Did you go into your developer settings and make sure you toggled the option titled "OEM Unlock"?
Click to expand...
Click to collapse
Got that figured out, thanks. All installed now after much difficulty.
notmyidea said:
Got that figured out, thanks. All installed now after much difficulty.
Click to expand...
Click to collapse
Good to hear! Please make sure you give a thumbs up to anyone who helped. It really keeps the community alive and kicking!
I found that I had to do this from completely powered off state:
press home + volume up + power
wait until second "sentence" appears on screen in yellow (the first "sentence" is blue),
Then release all buttons
twrp now boots.
for some reason, my internal and external storage is showing 0 mb. Anyway to fix this?
Try formatting (not just wipe) data.
Should the Galaxy Tab S2 2016 be on TWRP 3.2.1.0 or the new 3.2.3.0 for Linage OS 15?
If so, can't you just flash the update using TWRP on the img file, or is ODIN on the tar needed?
OK, I updated to TWRP 3.2.3 using TWRP Recovery and the img file. Appears to work fine.
SvenHee said:
I found that I had to do this from completely powered off state:
press home + volume up + power
wait until second "sentence" appears on screen in yellow (the first "sentence" is blue),
Then release all buttons
twrp now boots.
Click to expand...
Click to collapse
Sorry to revisit this issue. I can't get TWRP going on my S2 Tablet. I understand these instructions, but at the end of the ODIN installation there are two possibilities that I can see. If you set the ODIN to automatically reboot then you cannot do the above because it says to do it from completely powered off.
If you don't set ODIN to reboot automatically I can't get the tablet to turn off. I can only get it to boot by holding home+volume down + power. How do I get the tablet to power off before booting??
I am using ODIN 3.14.4 and TWRP-3.7.0 9-0-gts28wifi.img.tar and my stock firmware is NRD90M.T713XXS2BSG1 with Kernel 3.10.84-14953299
Thank you.
I want To Install TWRP in A8 Plus Android Pie
Any Solution?
Hello, have you tried the generic way to do it ? just go to download mode, plug ur phone to your computer, open up odin, get the RIGHT version of TWRP for the a8+, load it up in AP, uncheck auto reboot, flash, once the PASS is shown, remove the usb cable, press VOL Up + VOL Down + POWER together, once the download mode screen disapears, remove your hand from VOL Up, and it'll go to TWRP, if the phone reboots normally, you have to do this all over again.
Hi I need some help here. I have uninstalled magisk on my phone and now my phone is bricked. I cant go into recovery mode despite trying all button combination. If i were to plug in a charger. The phone will be stucked at the charging logo screen. The only button combi that is working now is power and volume down button which will reset the phone but the phone will get stuck at the loading screen. i have a Samsung note 9.
so you also cant go into odin mode?
power + bixby button + volume -
if you could still get into odin mode you could at least flash the stock rom with odin for pc
(first of all i apologize for my english)
My s3 mini got bricked after installing twrp last year. 1 month ago when I was trying to download stock rom, I couldn't enter twrp anymore. Now I can only enter download mode. Sometimes Samsung logo flickers and disappears when trying to turn it on, won't turn back on. is there a solution?
model : GT-I8190
(your english is perfect, no need to be sorry!)
step 1. put it in download mode (hold power, volume down, and home until the warning screen appears, then let go and click volume up)
step 2. connect it to PC
step 3. launch odin
step 4. download twrp and choose the twrp file in the AP slot and flash
after flashing, it will reboot and you can put it in recovery mode (hold power, volume up, and home until the boot screen with the phone's name appears, then let go of power but keep holding the other 2 until it boots into twrp)
hope this helped!
-Mason