After trying all kinds of roms from here, I decided to go back to basics and flash a global stable ROM.
In the Mi Flash software I forgot to check the "Clean All" button, and left the default(I don't know why this is the default) "Clean All and lock"
Now, I'm stuck in a recovery(can go to fastboot as well) bootloop, can't even turn it off unless the battery dies. It says at the bottom : "This MIUI version can't be installed on this device"
I'm unable to flash it again using mi flash, unable to unlock it again as it gives me a weird chinese error, that translated, it think it says : "This phone has been used by account 622****418, by looking for phone lock"
Unable to boot into EDL, tried with a deep flash cable(seems it is not supported anymore)
I didn't open it, as I still have warranty(just bought it 3 weeks ago).
USB Debugging and OEM unlock are off as it was just flashed so it has default values.
The account on it is mine, but apparently mi Unlock is not recognizing it. My Mi account has different digits and I have permission to unlock the bootloader since last year.
Is there any way that I can go around this ?
I'm thankful for any advice that you have, guys...
Your device is most likely permanently bricked - when the bootloader is locked with a global ROM on a Chinese Xiaomi phone, nothing can be done to fix it - except one thing.
Are you sure you're booting into EDL mode correctly? I think you need to short two points on the main PCB while plugging in a USB cable. Xiaomi has a proprietary implementation of EDL mode - IIRC you need special Xiaomi software and a Mi account with the appropriate permissions (you can beg Xiaomi for permission on the Mi forums, or buy a working account from someone online). In EDL mode, you can re-flash the China ROM and recover the device.
Most likely, that's what I'll have to do, but I wanted to consume every chance and tutorial online before I remove the Back glass...SO it's Service Center or Test Point with auth accounts, which it's hard to get. I rather pay. Just wanted to make sure that it's bricked from my perspective, like I can't do anything to fix it from my end. Thanks
There is nothing you can do, the bootloader is now locked and you are on a rom that's not matching.
I used the Russian tech reported in one of the other threads about bricked k20 pro, costed me $20 and I needed to open up the phone, and do test point edl which were all easy and well worth it to save the $650 AUD I paid for the phone.
https://forum.xda-developers.com/k20-pro/help/destroyed-error-fastboot-locked-t3946012/page6
just add him on whatsapp and be nice to the tech and he will help you. I saw other posts if you ask him like an ass then he will ignore you.
I definitely don't want to open the phone. If it comes to that, I rather pay someone to do everything with proper tools and software.
You know, try to get in touch with xiaomi support. Explain The case and maybe they unlock it for you from there.
Hey Bro
Blitzz.666 said:
After trying all kinds of roms from here, I decided to go back to basics and flash a global stable ROM.
In the Mi Flash software I forgot to check the "Clean All" button, and left the default(I don't know why this is the default) "Clean All and lock"
Now, I'm stuck in a recovery(can go to fastboot as well) bootloop, can't even turn it off unless the battery dies. It says at the bottom : "This MIUI version can't be installed on this device"
I'm unable to flash it again using mi flash, unable to unlock it again as it gives me a weird chinese error, that translated, it think it says : "This phone has been used by account 622****418, by looking for phone lock"
Unable to boot into EDL, tried with a deep flash cable(seems it is not supported anymore)
I didn't open it, as I still have warranty(just bought it 3 weeks ago).
USB Debugging and OEM unlock are off as it was just flashed so it has default values.
The account on it is mine, but apparently mi Unlock is not recognizing it. My Mi account has different digits and I have permission to unlock the bootloader since last year.
Is there any way that I can go around this ?
I'm thankful for any advice that you have, guys...
Click to expand...
Click to collapse
Did you find any solution without edl method? Cause currently I'm facing the same problem.
The only solution here is to go into EDL Mode, if you dont have an authorized mi account, I recommend s-unlock.com they have an automated service and their own tool to flash your phone, go check them out. If you have doubt opening the phone, it isnt hard. Just use playing card first and dont remove it, then find an old credit card to continue further gently.
Shaonhider97 said:
Did you find any solution without edl method? Cause currently I'm facing the same problem.
Click to expand...
Click to collapse
After removing the back of my phone and fixing it with the help of an awesome dude from Japan found on whatsapp...I tried to unlock my bootloader again, and realised that the account I had in my phone was not the one that I was entering on miUnlock. I couldn't see that because the error message at 99% was in trad Chinese.
Maybe it would've worked if I knew that. If you go into Fastboot and try to unlock it, what message do you get?
So, some days ago I've purchased a Mi A2 Lite. Right after starting it and testing it's basic functions, I headed right away to the computer to change ROMs. When I booted TWRP through fastboot, I wiped system to install another ROM, but the roms i'd downloaded wouldn't flash. Then, suddenly, TWRP touch stops working. I found then that it was a normal thing, and a guy posted in a thread that locking and unlocking his bootloader made TWRP work again (I did try to boot it again and didn't work). So I locked the device through a simple tool. Now, I can't unlock the bootloader in anyway. MiUnlock requires binding the device to an account (my device doesn't have an OS anymore since I wiped it), can't unlock it through fastboot (token verification failed), can't enter adb through commands because it is locked. MiFlash requires an authorized account to flash. QFIL doesn't flash because by entering in EDL Mode through test points, you have to start flashing fast, otherwise it won't be able to read hello packet, but the QFIL app takes too long to start flashing, I click it, it loads and loads, and just says it couldn't read packet. I'm trying to unbrick this device for 4 days long.
Now, the reason I say it is a faked Mi A2 Lite (can't know it for sure, actually) are these:
-Although the device came new from fabric, all the box and acessories had their plastics and stickers, the device came unlocked.
-The device came with Android One (which is right, as I bought a Mi A2 Lite), but has a Mi-Recovery 3.0, which is from MIUI systems, and Redmi 6 Pro has MIUI.
-When trying to unlock it through fastboot, I entered some commands to get info of the device, the interesting ones were these:
imei: (blank)
product: sakura (which is Redmi 6 Pro)
version-bootloader:MSM8953_DAISY1.0_20181019193735
I am from Brazil, and I am mostly sure that it is original and came this way from Xiaomi because the seller gave me the receipt and says he buys from authorized seller. And everything came with it's plastics on, the box was sealed-new, so I don't believe the seller did this, I believe Xiaomi did this mi a2 lite/redmi 6 pro confusion.
EDIT: I'm now sure it's Xiaomi's fault as I've found another identical cases where they had "sakura" devices with "daisy" bootloaders (exactly same versions), they probably chose to do this, which is worse than this being a mistake.
Could you guys help me, don't know what to do anymore. If you need more info to solve this problem, please ask, I'll post them right away.
@GNDawg
Well, I search around and it seems to be most likely a Xiaomi fault. they flashed a wrong firmware but it also could be that some seller in the chain took a bricked device, changed back over and flashed a rom that it had available either changing or not motherboard from the original but this is just a theory hard to proof.
Anyway now your best bet would be try to flash through an unnoficial tool like QPST download drivers and follow carefully instructions to update then onto your pc http://www.androidbrick.com/download/qualcomm-qdloader-hs-9008-edl-usb-driver/ and here is a tutorial how to use it https://c.mi.com/thread-226346-1-1.html this tool gives error on several cases so you have to search probably a modded sahara file for other MSM8953 to fix it.
And here a thread with a different method, the idea is try to boot from the sdcard, you could need some files to do it like a part of the system dumped for other user with the same device, this thread is just a reference for other model https://forum.xda-developers.com/g4/general/guide-unbrick-via-external-sdcard-qfil-t3748946
I did in the past the file to be flashed onto TWRP and dump it, I´ll try to search for it
SubwayChamp said:
@GNDawg
Well, I search around and it seems to be most likely a Xiaomi fault. they flashed a wrong firmware but it also could be that some seller in the chain took a bricked device, changed back over and flashed a rom that it had available either changing or not motherboard from the original but this is just a theory hard to proof.
Anyway now your best bet would be try to flash through an unnoficial tool like QPST download drivers and follow carefully instructions to update then onto your pc http://www.androidbrick.com/download/qualcomm-qdloader-hs-9008-edl-usb-driver/ and here is a tutorial how to use it https://c.mi.com/thread-226346-1-1.html this tool gives error on several cases so you have to search probably a modded sahara file for other MSM8953 to fix it.
And here a thread with a different method, the idea is try to boot from the sdcard, you could need some files to do it like a part of the system dumped for other user with the same device, this thread is just a reference for other model https://forum.xda-developers.com/g4/general/guide-unbrick-via-external-sdcard-qfil-t3748946
I did in the past the file to be flashed onto TWRP and dump it, I´ll try to search for it
Click to expand...
Click to collapse
Hey man, I didn't quite understand the tutorial you passed me, because it just says to build a EDL Cable and then flash it through MiFlash, as far as I understood. I'm so tired I think I'm gonna pay s-unlock to unbrick this damn phone, are they trustworthy? The service doesn't need TeamViewer anymore, they've built a tool which needs an account with credits (you pay for them), and then you can flash using these credits, I wonder if the process fails, will the credits be gone? hahaha man, look at the level we're at, thank you Xiaomi!
GNDawg said:
Hey man, I didn't quite understand the tutorial you passed me, because it just says to build a EDL Cable and then flash it through MiFlash, as far as I understood. I'm so tired I think I'm gonna pay s-unlock to unbrick this damn phone, are they trustworthy? The service doesn't need TeamViewer anymore, they've built a tool which needs an account with credits (you pay for them), and then you can flash using these credits, I wonder if the process fails, will the credits be gone? hahaha man, look at the level we're at, thank you Xiaomi!
Click to expand...
Click to collapse
In the post in spanish there are some useful links like Qualcomm 9008-USB drivers and other to explain how to avoid drivers verification on Windows, this could be necessary to get a perfect connection among your device and pc although I´m begin to suspect that motherboard is damaged at some level, I say you this cause I had similar problem in different circumstances with a Xiaomi device in the past; briefly explained an user uploaded incorrect files to some site and I flashed onto my device and some of the files were for other model; result: totally bricked, I tried a lot of guides and method but I didn´t give out till I was absolutely sure that there was nothing more to do with. Finally I had to buy other motherboard and that device now is working fine.
I commented about a method to "burn" a part of the image in an external SDcard, a part of the system image means just about 100 or 200 MB sized of the image, I shared year/s ago a zip to obtain it (I didn´t find now) so some user that have same device can flash it through TWRP and so dump this "part/fraction" of system, then they can share with you, you burn it using the disc image utility inbuilt on Windows and then apply to your device and this way your device do an attempt to boot from this SDcard, then you can flash normally all the whole rom through XiaoMi flash. But your case is slightly different, it seems like not a totally brick, in my case I didn´t have any partition working like fastboot, recovery, nothing at all. The third link refers to something similar to the exposed above.
Referent to this service, you have to be sure that they can do something with a device that can´t communicate correctly with XiaoMi flash and you said me first that the tool needs an account authorized but then you said that the tool began but finally failed to flash that mean that the tool can work without an authorization, if this is true you only have to refine the method to use it correctly.
Probably you can upload an image while you´re attempting in XiaoMi flash to see how is detecting it.
SubwayChamp said:
In the post in spanish there are some useful links like Qualcomm 9008-USB drivers and other to explain how to avoid drivers verification on Windows, this could be necessary to get a perfect connection among your device and pc although I´m begin to suspect that motherboard is damaged at some level, I say you this cause I had similar problem in different circumstances with a Xiaomi device in the past; briefly explained an user uploaded incorrect files to some site and I flashed onto my device and some of the files were for other model; result: totally bricked, I tried a lot of guides and method but I didn´t give out till I was absolutely sure that there was nothing more to do with. Finally I had to buy other motherboard and that device now is working fine.
I commented about a method to "burn" a part of the image in an external SDcard, a part of the system image means just about 100 or 200 MB sized of the image, I shared year/s ago a zip to obtain it (I didn´t find now) so some user that have same device can flash it through TWRP and so dump this "part/fraction" of system, then they can share with you, you burn it using the disc image utility inbuilt on Windows and then apply to your device and this way your device do an attempt to boot from this SDcard, then you can flash normally all the whole rom through XiaoMi flash. But your case is slightly different, it seems like not a totally brick, in my case I didn´t have any partition working like fastboot, recovery, nothing at all. The third link refers to something similar to the exposed above.
Referent to this service, you have to be sure that they can do something with a device that can´t communicate correctly with XiaoMi flash and you said me first that the tool needs an account authorized but then you said that the tool began but finally failed to flash that mean that the tool can work without an authorization, if this is true you only have to refine the method to use it correctly.
Probably you can upload an image while you´re attempting in XiaoMi flash to see how is detecting it.
Click to expand...
Click to collapse
So, there's this problem that happens when the software can't connect to the device if I take too long to flash after entering EDL Mode, I've seen a lot of other cases of this "problem" too. I have to test point and flash right after, which is no problem in MiFlash, but in QFIL and QPST it looks like it takes too long to connect with the device and then it fails. But I've seen that S-Unlock uses
their own tool called XiaomiTool, where they create an account for you which has credits. Then the tool uses the credits to flash. It's quite confusing... but you don't need to grant them TeamViewer access, which if way more safer than the previous method. Man... I had a ZUK device before, there was no AntiRollback ****, I didn't even had to unlock a bootloader in the first place you would just wipe and flash all day long for as long as you'd want, I was in heaven and didn't know it.
Also, I'm pretty sure the softwares detect the device just fine, the device connects through 9008 port, and they detect it right after connecting it.
GNDawg said:
So, there's this problem that happens when the software can't connect to the device if I take too long to flash after entering EDL Mode, I've seen a lot of other cases of this "problem" too. I have to test point and flash right after, which is no problem in MiFlash, but in QFIL and QPST it looks like it takes too long to connect with the device and then it fails. But I've seen that S-Unlock uses
their own tool called XiaomiTool, where they create an account for you which has credits. Then the tool uses the credits to flash. It's quite confusing... but you don't need to grant them TeamViewer access, which if way more safer than the previous method. Man... I had a ZUK device before, there was no AntiRollback ****, I didn't even had to unlock a bootloader in the first place you would just wipe and flash all day long for as long as you'd want, I was in heaven and didn't know it.
Also, I'm pretty sure the softwares detect the device just fine, the device connects through 9008 port, and they detect it right after connecting it.
Click to expand...
Click to collapse
You say that through XiaoMi Flash (also usually called MiFlash tool) the flash process begins then no need to an authorized account, right? if this is right then now the only challenge is get the tool to work fine and in this case I guess that the best would be to try with some tricks like:
- Uninstall all the drivers (I know you say that pc detects it but it seems that in the way it is disconnecting).
- Before to reinstall them again disable signature verification from Windows to avoid that some firewall/antivirus cut the drivers to be installed properly.
- Check that the folder where the images and the scripts are, be in the last directory/path in the tool an short the name where it contained for "6mipro" for example without spaces.
- Move all the files of the rom to the same drive and folder where XiaoMi flash is installed usually C drive.
- Prepare previously all the tool and the path and just to the end put device in download mode, with battery disconnected and fingerprint is also recommendable to get out.
- Try with firmware for 6 Pro and also for A2 Lite.
Regarding this service is extrange how they can take control over device, no remote service, nor IMEI required or IP digits, How they can put a firmware onto your device this way!. There are other services that you can consult before to accept this unless you find some positive reference about it.
SubwayChamp said:
You say that through XiaoMi Flash (also usually called MiFlash tool) the flash process begins then no need to an authorized account, right? if this is right then now the only challenge is get the tool to work fine and in this case I guess that the best would be to try with some tricks like:
- Uninstall all the drivers (I know you say that pc detects it but it seems that in the way it is disconnecting).
- Before to reinstall them again disable signature verification from Windows to avoid that some firewall/antivirus cut the drivers to be installed properly.
- Check that the folder where the images and the scripts are, be in the last directory/path in the tool an short the name where it contained for "6mipro" for example without spaces.
- Move all the files of the rom to the same drive and folder where XiaoMi flash is installed usually C drive.
- Prepare previously all the tool and the path and just to the end put device in download mode, with battery disconnected and fingerprint is also recommendable to get out.
- Try with firmware for 6 Pro and also for A2 Lite.
Regarding this service is extrange how they can take control over device, no remote service, nor IMEI required or IP digits, How they can put a firmware onto your device this way!. There are other services that you can consult before to accept this unless you find some positive reference about it.
Click to expand...
Click to collapse
No, it does need an authorized account, but first it has to connect to the device, after it suceeds, it then asks for the account. I don't think that it "disconnecting" is a big issue, only if the Xiaomi Tool that the S-Unlock guys use also takes a long time to connect to the device.
To explain the problem more precisely, the software tells me "cannot read hello packet if I press the button too long after connecting EDL, it fails seconds after clicking to flash. If I connect the device and flash right away, it suceeds and then proceeds to ask the authorized account.
And about the service, they don't actually take control over the device, I would do the flashing myself, the only thing they do is provide the account necessary to flash, but it isn't in the MiFlash tool, it's the XiaomiTool (they give the link to the app), where it first asks for an account, then only after logging in it can start the flashing process. One of those cases I've talked about that were just like mine were solved with these guys.
GNDawg said:
No, it does need an authorized account, but first it has to connect to the device, after it suceeds, it then asks for the account. I don't think that it "disconnecting" is a big issue, only if the Xiaomi Tool that the S-Unlock guys use also takes a long time to connect to the device.
To explain the problem more precisely, the software tells me "cannot read hello packet if I press the button too long after connecting EDL, it fails seconds after clicking to flash. If I connect the device and flash right away, it suceeds and then proceeds to ask the authorized account.
And about the service, they don't actually take control over the device, I would do the flashing myself, the only thing they do is provide the account necessary to flash, but it isn't in the MiFlash tool, it's the XiaomiTool (they give the link to the app), where it first asks for an account, then only after logging in it can start the flashing process. One of those cases I've talked about that were just like mine were solved with these guys.
Click to expand...
Click to collapse
Ok, now the things are most clear, I never need an authorized account (by fortune) I´m not sure and I expect that my actual doesn´t need it just in case.
When you connect for first time to the tool and try to flash then the tool allows you continue but of course then it prompts for an authorization, from here you can´t try a second attempt in the same time that it remains connected this will lead you then of a few minutes to a fail like "sahara fail" or "cannot read packet".
In my experience the second attempt didn´t work at all so you have to disconnect device and restart the tool to can try it again.
As far I understand this is similar to a patched Odin for Samsung devices to bypass some security controls but in this case they provide you a patched XiaoMi tool which is controlled remotely to get authorized. It has sense and it seems trustworthy.
I don´t know if actually Xiaomi authorizes new account users https://miui.blog/any-devices/mi-account-authorization-tips/
And Probably you can try first an older version of MiPhone, previous than XiaoMi flash https://www.xiaomiflash.com/download/
SubwayChamp said:
Ok, now the things are most clear, I never need an authorized account (by fortune) I´m not sure and I expect that my actual doesn´t need it just in case.
When you connect for first time to the tool and try to flash then the tool allows you continue but of course then it prompts for an authorization, from here you can´t try a second attempt in the same time that it remains connected this will lead you then of a few minutes to a fail like "sahara fail" or "cannot read packet".
In my experience the second attempt didn´t work at all so you have to disconnect device and restart the tool to can try it again.
As far I understand this is similar to a patched Odin for Samsung devices to bypass some security controls but in this case they provide you a patched XiaoMi tool which is controlled remotely to get authorized. It has sense and it seems trustworthy.
I don´t know if actually Xiaomi authorizes new account users https://miui.blog/any-devices/mi-account-authorization-tips/
And Probably you can try first an older version of MiPhone, previous than XiaoMi flash https://www.xiaomiflash.com/download/
Click to expand...
Click to collapse
Hey man, I bought the S-Unlock service, I tried to flash the daisy ROM but it wouldn't send the "firehose_emmc_something" succesfully, so I tried the Redmi 6 Pro ROM i'd downloaded (Xiaomi_Redmi_6_Pro_V9.6.4.0.ODMMIFD_20180730.0000.00_8.1_Global_XFT) and it succesfully flashed!!!!!
BUT, it doesn't boot. "This version of MIUI can't be installed on this device."
Any ideas? In the support group of S-Unlock they say this happens when you flash a global rom into a chinese device, which can only receive global roms with unlocked bootloaders. An admin from the group told me to flash chinese ROM.
EDIT: sent the command fastboot getvar all:
product: sakura_india
it ****ing changed hahaha, now I'll probably have to flash an indian ROM, but I'll have to pay again, I really want to give up this device...
GNDawg said:
Hey man, I bought the S-Unlock service, I tried to flash the daisy ROM but it wouldn't send the "firehose_emmc_something" succesfully, so I tried the Redmi 6 Pro ROM i'd downloaded (Xiaomi_Redmi_6_Pro_V9.6.4.0.ODMMIFD_20180730.0000.00_8.1_Global_XFT) and it succesfully flashed!!!!!
BUT, it doesn't boot. "This version of MIUI can't be installed on this device."
Any ideas? In the support group of S-Unlock they say this happens when you flash a global rom into a chinese device, which can only receive global roms with unlocked bootloaders. An admin from the group told me to flash chinese ROM.
EDIT: sent the command fastboot getvar all:
product: sakura_india
it ****ing changed hahaha, now I'll probably have to flash an indian ROM, but I'll have to pay again, I really want to give up this device...
Click to expand...
Click to collapse
The service is very limited, they had to guide you to a final success, it´s a shame.
It was hard to know exactly what firmware is the proper for this "hybrid" phone. The theory is right, this might be an indian version but I guess that you didn´t receive at first the getvar product as sakura_india.
It might be great if they can unlock bootloader and this way you can do anything on it.
Did you see bootloader status or if you can flash something now through fastboot?
Try with other tool for Qualcomm from here https://androidmtk.com/category/tools maybe some of them work.
SubwayChamp said:
The service is very limited, they had to guide you to a final success, it´s a shame.
It was hard to know exactly what firmware is the proper for this "hybrid" phone. The theory is right, this might be an indian version but I guess that you didn´t receive at first the getvar product as sakura_india.
It might be great if they can unlock bootloader and this way you can do anything on it.
Did you see bootloader status or if you can flash something now through fastboot?
Try with other tool for Qualcomm from here https://androidmtk.com/category/tools maybe some of them work.
Click to expand...
Click to collapse
The service is only to give me the EDL Authorization, they don't care if what I flash, they just grant me this permission to flash in EDL, which ****ing xiaomi requires. They have a bootloader unlocking service, but for MIUI v9 only, and there isn't an option for my phone (neither mi a2 lite nor redmi 6 pro). I'm willing to try again, it would cost me 10 dollars more, but I need to know what Rom works for this thing. I don't think these tools will work because the phone continues the same, but now with a ROM which the device doesn't accept because of locked bootloader which I can't unlock.
EDIT: I've read in an article from XDA that booting MIUI Roms in the Redmi 6 pro can brick it. I'll have to flash a custom rom?
GNDawg said:
The service is only to give me the EDL Authorization, they don't care if what I flash, they just grant me this permission to flash in EDL, which ****ing xiaomi requires. They have a bootloader unlocking service, but for MIUI v9 only, and there isn't an option for my phone (neither mi a2 lite nor redmi 6 pro). I'm willing to try again, it would cost me 10 dollars more, but I need to know what Rom works for this thing.
Click to expand...
Click to collapse
If the limit is according a certain time and not number of flashing sessions I think you have to follow these simple rules:
- Flash first an Indian version of 6 Pro http://en.miui.com/download-349.html#545 (choose stable not developer rom)
- Prepare/download if it exists a chinese version, I´m not sure it does so device was release for India but some guys are talking that they bought with a chinese firmware although in the official site there is only an Indian firmware.
- Keep in mind that this device has ARB so don´t try with a lower build number version.
I don't think these tools will work because the phone continues the same, but now with a ROM which the device doesn't accept because of locked bootloader which I can't unlock.
Click to expand...
Click to collapse
No, this tool can work as the same way that XiaoMi flash can, the same thing that both can´t achieve is that a wrong firmware can work/boot up on your device due to regional locking security. Maybe you can try this simple tool before https://androidmtk.com/download-emmc-dl-tool anyway if doesn´t result probably the best would be go for a second chance with that service.
SubwayChamp said:
If the limit is according a certain time and not number of flashing sessions I think you have to follow these simple rules:
- Flash first an Indian version of 6 Pro http://en.miui.com/download-349.html#545 (choose stable not developer rom)
- Prepare/download if it exists a chinese version, I´m not sure it does so device was release for India but some guys are talking that they bought with a chinese firmware although in the official site there is only an Indian firmware.
- Keep in mind that this device has ARB so don´t try with a lower build number version.
No, this tool can work as the same way that XiaoMi flash can, the same thing that both can´t achieve is that a wrong firmware can work/boot up on your device due to regional locking security. Maybe you can try this simple tool before https://androidmtk.com/download-emmc-dl-tool anyway if doesn´t result probably the best would be go for a second chance with that service.
Click to expand...
Click to collapse
No, every flash costs 10 credits, which costs 10 dollars. If I get it wrong, I have to pay again.
What I meant by the tools not working is that just like Xiaomi flash, they require the EDL authorization.
I tried with emmc tool, but I couldn't get it to work, it gives me "Failed to connect to phone"
Adding the edit I put in the previous reply, I read an article here in XDA saying that flashing MIUI Rom in Redmi6 pro (along with other devices) may brick the device just like my device is bricked right now (https://www.xda-developers.com/flash-miui-global-locked-bootloader-xiaomi-brick/
So, will I have to flash custom rom?
GNDawg said:
No, every flash costs 10 credits, which costs 10 dollars. If I get it wrong, I have to pay again.
Click to expand...
Click to collapse
Ah ok, then the best is go direct to the safest zone flashing the rom linked in my previous post.
What I meant by the tools not working is that just like Xiaomi flash, they require the EDL authorization.
I tried with emmc tool, but I couldn't get it to work, it gives me "Failed to connect to phone"
Adding the edit I put in the previous reply, I read an article here in XDA saying that flashing MIUI Rom in Redmi6 pro (along with other devices) may brick the device just like my device is bricked right now (https://www.xda-developers.com/flash-miui-global-locked-bootloader-xiaomi-brick/
Click to expand...
Click to collapse
Yes, this is now the scenario, to be honest your device is now "double" bricked, first time was bricked due to relock bootloader while a non-proper firmware was shipped with i.e. a Mi A2 Lite firmware on a different device. And the second time now when you flashed a a Global rom over a device that supposedly was (it had to be) shipped with an indian/chinese firmware.
But don´t worry about it, device at this way won´t boot due to a locked bootloader, if you still can enter to fastboot and recovery no signals of serious damages.
So, will I have to flash custom rom?
Click to expand...
Click to collapse
No, never try it yet with locked bootloader untill you unlocket it, this won´t result as same as try to modify any partition or file you can´t by now, your device simply won´t boot at all.
SubwayChamp said:
Ah ok, then the best is go direct to the safest zone flashing the rom linked in my previous post.
Yes, this is now the scenario, to be honest your device is now "double" bricked, first time was bricked due to relock bootloader while a non-proper firmware was shipped with i.e. a Mi A2 Lite firmware on a different device. And the second time now when you flashed a a Global rom over a device that supposedly was (it had to be) shipped with an indian/chinese firmware.
But don´t worry about it, device at this way won´t boot due to a locked bootloader, if you still can enter to fastboot and recovery no signals of serious damages.
No, never try it yet with locked bootloader untill you unlocket it, this won´t result as same as try to modify any partition or file you can´t by now, your device simply won´t boot at all.
Click to expand...
Click to collapse
Hey, so I downloaded the ROM you linked, but it is in .zip format, and the files inside are different from the other ROMs I downloaded, which are in .tgz (I think these are fastboot ROM files, dunno, but they are all in the same format and arrangement), I searched and found a ROM in MIUI site (http://en.miui.com/a-234.html).
The file name is sakura_india_global_images_V10.3.3.0.PDMMIXM_20190711.0000.00_9.0_global_400152c914.tgz
Looks like the same as the one you sent, but in tgz, since it is sakura india global image, 10.3.3.0 and 9.0.
GNDawg said:
Hey, so I downloaded the ROM you linked, but it is in .zip format, and the files inside are different from the other ROMs I downloaded, which are in .tgz (I think these are fastboot ROM files, dunno, but they are all in the same format and arrangement), I searched and found a ROM in MIUI site (http://en.miui.com/a-234.html).
The file name is sakura_india_global_images_V10.3.3.0.PDMMIXM_20190711.0000.00_9.0_global_400152c914.tgz
Looks like the same as the one you sent, but in tgz, since it is sakura india global image, 10.3.3.0 and 9.0.
Click to expand...
Click to collapse
Oh my bad, I linked the rom that is for recovery, the link that you have this is the right firmware to flash through fastboot.
SubwayChamp said:
Oh my bad, I linked the rom that is for recovery, the link that you have this is the right firmware to flash through fastboot.
Click to expand...
Click to collapse
**** man, I'm so frustrared, flashed this ROM and got the same ****ing thing. "This MIUI version can't be installed on this device."
fastboot getvar all
version-bootloader:MSM8953_DAISY2.0_20190711190946
(bootloader) hw-revision:10001
(bootloader) rollback_ver:2
(bootloader) serialno:09d58bc30805
(bootloader) kernel:lk
(bootloader) product:sakura_india
I found that if you send fastboot getvar anti you get if your phone has got antiroll or something like this
fastboot getvar anti
anti:
it gives me blank...
I think I may have another chance to flash, I have some credits, don't know if they are enough, what ROM should I try next if I can? I was thinking maybe chinese ROM?
GNDawg said:
**** man, I'm so frustrared, flashed this ROM and got the same ****ing thing. "This MIUI version can't be installed on this device."
fastboot getvar all
version-bootloader:MSM8953_DAISY2.0_20190711190946
(bootloader) hw-revision:10001
(bootloader) rollback_ver:2
(bootloader) serialno:09d58bc30805
(bootloader) kernel:lk
(bootloader) product:sakura_india
I found that if you send fastboot getvar anti you get if your phone has got antiroll or something like this
fastboot getvar anti
anti:
it gives me blank...
I think I may have another chance to flash, I have some credits, don't know if they are enough, what ROM should I try next if I can? I was thinking maybe chinese ROM?
Click to expand...
Click to collapse
Redmi 6Pro as same as Mi A2 Lite have ARB but actually bootloader revisions are not implementing it so it stays as blank (a kind of zero), when your device reach value 5 then you can´t downgrade anymore on locked bootloaders.
There is something very strange that unfortunately marked your device as practically unusable. The system partition seems to be wrong from the fabric.
It´s hard to know which firmware it´s the correct. Did you see those users with the same problem? maybe you can ask them in some forum for sure.
If exists a chinese version as stated in my previous post this would be the next chosing and the next if exists a chinese version of Mi A2 Lite so I wonder how they installed Android One previously.
SubwayChamp said:
Redmi 6Pro as same as Mi A2 Lite have ARB but actually bootloader revisions are not implementing it so it stays as blank (a kind of zero), when your device reach value 5 then you can´t downgrade anymore on locked bootloaders.
There is something very strange that unfortunately marked your device as practically unusable. The system partition seems to be wrong from the fabric.
It´s hard to know which firmware it´s the correct. Did you see those users with the same problem? maybe you can ask them in some forum for sure.
If exists a chinese version as stated in my previous post this would be the next chosing and the next if exists a chinese version of Mi A2 Lite so I wonder how they installed Android One previously.
Click to expand...
Click to collapse
I think the main problem is the locked bootloader, the device came unlocked so they must've installed android one easily.
I was searching for those similar cases I'd said and found at least 4 more, where they had Mi A2 Lite with sakura product name. Some of them said they had LineageOS installed... I don't remember seeing any Lineage symbols when I booted the device and I know it because I used on my previous device, I only know it was Android One.
In one of the cases, the buyer talked to the seller who showed him all of the other A2 Lite he had were just like his, with LineageOS installed. That's so bad man...
Another useful info, in the back of the phone there's a Model Number, and it matches the box model number, so it isn't counterfeit or scammed, I'm sure this came from Xiaomi.
And one of the cases were solved flashing MIUI China version, I believe that the only way these are not from Xiaomi is everybody having bought from the same chinese seller who did this, so it would make sense that only MIUI Chinese version works, I'll try it, since it's the only option.
I think I'll not be able to flash daisy ROMs, when I tried two daisy ROMs, in both cases the firehose thingy wouldn't send correctly and the flash would fail, sakura ones work fine.
GNDawg said:
I think the main problem is the locked bootloader, the device came unlocked so they must've installed android one easily.
Click to expand...
Click to collapse
Well, here is where my theory that some reseller had to do the whole mistake so the device come locked by default and if Xiaomi flashed Android One also they have to make an A/B partition scheme and this didn´t happen, anyway this is just for the record BUT this could be useful to claim your rights to the seller so if they didn´t do by itself then they had the obligation to buy from a reseller a good device to can sell it to a client in a well form and this is achieve without any technical skill just comparing the IMEIs declared from the box with device itself. Also atleast in my country R6Pro is cheaper than Mi A2 Lite so has sense that they bucked some dollars with it.
I was searching for those similar cases I'd said and found at least 4 more, where they had Mi A2 Lite with sakura product name. Some of them said they had LineageOS installed... I don't remember seeing any Lineage symbols when I booted the device and I know it because I used on my previous device, I only know it was Android One.
In one of the cases, the buyer talked to the seller who showed him all of the other A2 Lite he had were just like his, with LineageOS installed. That's so bad man...
Another useful info, in the back of the phone there's a Model Number, and it matches the box model number, so it isn't counterfeit or scammed, I'm sure this came from Xiaomi.
Click to expand...
Click to collapse
I guess they confussed LineageOs with Android One, in Pie there is not many differences at a quick view,
And one of the cases were solved flashing MIUI China version, I believe that the only way these are not from Xiaomi is everybody having bought from the same chinese seller who did this, so it would make sense that only MIUI Chinese version works, I'll try it, since it's the only option.
I think I'll not be able to flash daisy ROMs, when I tried two daisy ROMs, in both cases the firehose thingy wouldn't send correctly and the flash would fail, sakura ones work fine.
Click to expand...
Click to collapse
In this site there are many firmware versions https://xiaomifirmware.com/roms/download-official-roms-for-redmi-6-pro/ probably you have to choose the chinese version that came first with device and not try to upgrade it to the latest contrarily as we think before. I read that Redmi 6 Pro did come with Oreo 8.1 and although it had a Pie firmware was from other device and it won´t be considered as a downgrade in this case so never had Pie firmware based on Miui.
I did find this but I don´t know if it´s reliable, if unlocking bootloader can be done device will free for any rom http://en.miui.com/forum.php?mod=redirect&goto=findpost&ptid=5997528&pid=35773053