As the title says. I'm connected to my home WiFi, everything works normally (I've got other 2 phones connected, my PC, PS4, etc and they all work normally) and when I open some games (Pokémon Unite, Genshin Impact) the game says it's not connected to the internet.
When I open the games in my PC / Switch / other phone it does work normally.
When I use my mobile data to open the games on the Moto Edge 30, it works normally.
I've already done a Network Configuration Reset, a Factory Reset, and it's still not working.
I've just bought the phone yesterday... I was very happy. But now I'm frustrated.
Can someone help? Thanks!
Related
Hey!
each time I flashed a new rom, the setup of 3g internet doenst work anymore.
i entered all data like they should be, but it doenst work.
after a while, sometimes hours, sometimes a day or longer the connect works again without doing anything.
I dont understand why!
anyone got a tip for me?
Ok, lets get more information...
the interessting thing is, that if i do a full backup of my system when mobile internet works, and restore it after a flash (or hard reset), interworks works immediately.
when not, no internet for uncertain times
Are you sure connection setup runs on startup. I mean you're internet settings must be setuped before it works and this starts automaticely some time after you connect to your phone network.
some time ago i tried it aner it didnt work.
now i tried again and now it works =)
Still I am very curious why I cannot change the settings manually...
Wifi works fine at home with no drop at all. However, in office it just does not connect - it goes in a loop : scanning-connecting-authenticating-disconncted-scanning. Does not matter whether the password is right or wrong. My office uses WPA/WPA 2 PSK.
It was connecting before then suddenly it stopped working. It still connects via WebOS. I have tried partition wipe, android factory reset, xron mod etc. but still no luck. I thought it will be fixed after factory reset or partition wipe but no. Can anyone please help me? P.S. I will not be able to get the router reset in office.
This could be a lot of things. Could you set your phone up as a wifi hotspot or bluetooth tether or something?
i had that in my office....i just made it forget the network and enter the password again, seemed to do the trick
I had the same issue. There is a youtube video that will show you how to fix it and I haven't had the problem since. I can't post links because I'm a new user, but search "Fix Wifi Issues on Your Touchpad Running Android" on youtube.
Visited my friend today at his townhouse where is countless wireless networks.
His TP refuses to connect and my TP that is working without problems at my house refused to connect as well.
We changed the AP settings to CH6 on 2.4GHz - no change and it would not connect to 5GHz AP neither.
Got back home and it connected no problem.
Thanks all. I tried entering the password again and it connected!
whenever my TP does this I just tick "Airplane Mode" then enable the Wifi again.
at the same time i installed xron 1/3/2012 , i found this "fxr wififix"
it is free from market
it works great for me..
Thanks
amkaos said:
at the same time i installed xron 1/3/2012 , i found this "fxr wififix"
it is free from market
it works great for me..
Click to expand...
Click to collapse
This has worked for me in both MIUI and XRON for 3 touchpads
I have been trying to connect my stock Galaxy Note 3 via wifi to the Seagate Goflex Satellite hard drive, and it immediately disconnects. The Note 3 shows the connection is available, and when it attempts to connect it says Checking Quality of Internet Connection, and then it drops off and says Internet not available. I just downloaded and installed the 1.3.7.001 firmware for the Goflex and no difference. I can connect with a laptop to the same connection, and I also was able to use a Samsung Captivate with Cyanogen Mod 10 installed, no problems making the connection. Is it a problem with the Android 4.3 installed on the Note 3? Any suggestions would be appreciated.
I am having the same problems, works fine on my Nexus 7 but Note 3 wont keep a connection to it, hope this is resolved fast, I rely on that drive to work flawlessly.
Unable to contact to goflex satellite with note 3
I was able to resolve the issue by reinstalling the goflex media software from the play store. Apparently it must have been a bad install the first time?
Happened again
Today i go to use my goflex satellite with my note 3 and it stopped working again! Ive tried manually restarting the software prior to turning on the drive in case the software needs to be up before attempting a connection. This seems like something going on with the note 3. I will reach out to seagate support. I'll let you know of i hear anything. O the owners in the same situation please do the same so we get attention.
I can access mine just fine using a file explorer. Enter the ip, login and password and I'm in..? Why are you using strange software? I did download some sort of software to access mine remotely and it didn't really work. Could see files but not download them. You should be able to even use the file explorer to access via remote ftp
You were lucky I guess, because I have reinstalled the software app on my Note 3 a few times now, and nothing worked for me.
Solution recommended by Seagate technical support
Hello Everyone,
I've had this exact same problem on my Samsung Galaxy S3 after upgrading Android from 4.1.2 to 4.3
I logged a support ticket with Seagate support. The solution/workaround I was provided is:
1) Access Settings -> Wifi
2) Access the Android menu soft key -> Advanced
3) Uncheck the option "Auto Network Switch"
I have not had a chance to test this suggestion solution as yet, but it does sound promising, although the fine print on the option says this option is auto switching between WiFi and Mobile data, not between WiFi APs.
That said, whilst I was waiting for Seagate support to respond, I found another workaround:
1) Logon to the the GoFlex Satellite from a Windows PC using the browser URL (172.25.0.1/)
2) Enable the Connect to the internet option at the bottom left hand corner of the page
In my case, I connect to my home WiFi AP.
Once connected, I then connect my Galaxy S3 to the GoFlex Satellite's WiFi. For some reason having the passthrough Internet connectivity established first on my Windows PC stopped the switching away from the GoFlex Wifi.
I hope one of these suggested workarounds is of assistance.
Cheers,
Michael
i have searched and read and searched some more and can not come up with anything.
here is my issue, i have a s4a, i have comcast modem with a netgear router, i have streamed pandora on this setup for at least a year or more, occasionally netflix and of course some youtube videos. a few weeks ago i signed up for hulu plus, got a chromecast and went to streaming video from my phone. i watched several shows through the chromcast from my phone as well as a movie on HBOgo. last week sometime something has happened and i can no longer stream anything on my phone, hulu, netflix, hbo, pandora, none of these work, i downloaded cartoon network and it works fine. if i disconnect from my wireless network i can stream all of them, as soon as i connect to wifi "unfortunatly (app) has stopped". i have reset my modem, router, wiped my phone, updated my phone to 4.3, re wiped the phone, and still nothing, as of this moment the only app that i have downloaded on my phone is pandora, and i can not stream when connected to wifi...
if i go anywhere else and connect to their wifi everything works fine... why did my phone all of a sudden stop streaming on my network only?
my wifes iphone works fine with all of the above and connected to the chromecast
any help would be great as i am ready to smash this phone
tp8728 said:
any help would be great as i am ready to smash this phone
Click to expand...
Click to collapse
Nothing comes to mind that wouldn't have been solved by everything you've already done... Maybe you will have to buy a new modem?
Just another random thing that might work... try adding a different Google account to your S4A and downloading the streaming apps through that Google account and see if that solves the issue. I believe that specific Google accounts can be limited by developer's based on an auth code that I think is associated with your Google account. Idk why you might be limited, and it seems extremely coincidental that you would be limited by several different developers/provides at the same time, unless Google is for some reason responsible. Please note that I know little about this particular thing so it's a complete stab in the dark but it just might work.
not sure how or why this worked, but maybe it will help someone in the future.
i decided to scan my available wireless networks in range from my phone again.... (not because i was going to mooch from a neighbor ) and noticed that my neighbor had a network labeled "lastname" and "lastname guest".
that got me thinking and reading about my router, i found out that i could set up a "guest" network as well, set it up, connected my phone and only my phone and everything works again, i have no idea why or what happened but it works for now
So as the title says, I can't use the cast/screen mirroring feature in phone. I just cannnot connect to any tv
Whenever I try to cast, it doesn't show any devices at all. Null. and using the button from the notification dropdown, it just searches endlessly.
Some notes:
1. No problem with network. No problem with TV. Other phones work just fine, and doesn't take more than a minute to find device.
2. I tried not only on my TV but on other TV's as well with cast feature. My TV is Hisense smart 39", 39A5605.
3. Already did several restarts, disabled active apps (like adguard), still same.
4. My phone is using the latest PIE update (official update but sideloaded)
5. Already tried connecting on the same WiFi network. Still didn't work. Other devices can connect to the TV without the need to connect on the same wifi network.
6. Already tried turning both mobile data and wifi while scanning. still nothing.
7. Already tried disconnecting current wifi connection (set network to 'forget) but left wifi on while scanning. Still no device found.
8. Already tried installing some apps (like Google Home app and other cast app). Nothing.
9. Already went to developer options and turned on 'Wireless Display Certification', but no additional options show up on my cast screen (like listening mode etc). Just plain nothing.
10. There's no three-dot menu on the cast screen that will show 'enable wireless display.' just a search icon on the top right and nothing more.
I really wanted to find a solution, but can't find a specific fix. I hope somebody here will help. Please. Please I'm desparate.
By the way, I know some will say I should do a factory resetting, but please understand if I say no for now. Because if I do, I'll lose a lot of settings and configuration (system-level and app-level), among other hassle it may incur.
Try connecting the TV on the same wifi as your phone and use xcast from playstore. My LG TV is a bit finicky when it comes to connection so xcast helps. But I do have the certification options on the cast screen. Since, you said you sideloaded Pie, if xcast doesn't work, maybe try resetting the device.
rr93 said:
Try connecting the TV on the same wifi as your phone and use xcast from playstore. My LG TV is a bit finicky when it comes to connection so xcast helps. But I do have the certification options on the cast screen. Since, you said you sideloaded Pie, if xcast doesn't work, maybe try resetting the device.
Click to expand...
Click to collapse
Thanks for the kind response. So I tried x-cast (though it uses a different name in the playstore now). Funny thing is, x-cast says it found the tv, which it did, and says it's connected via DLNA. So the phone can actually detect the tv, but why need x-cast? However, TV doesn't show any signs of connections or response. When I also try to play any video inside x-cast app, it's just stuck in loading. (see screenshot). Did I miss any step here?
bebotette said:
Thanks for the kind response. So I tried x-cast (though it uses a different name in the playstore now). Funny thing is, x-cast says it found the tv, which it did, and says it's connected via DLNA. So the phone can actually detect the tv, but why need x-cast? However, TV doesn't show any signs of connections or response. When I also try to play any video inside x-cast app, it's just stuck in loading. (see screenshot). Did I miss any step here?
Click to expand...
Click to collapse
This is the screen where the TV usually connects. I am sorry but I can't think of any other troubleshooting steps for now.
last night, I did a factory reset. Didn't do anything go. Just caused me a lot of trouble.