Related
Hello, guys.. I'm having a real trouble with my Note. I bought it 3 months ago, but it seems that today's my "lucky" day and the microUSB connector isn't working anymore. At all. No charging, no "usb connected", no mass storage. It's not charging even when I turn off the phone and plug the charger.
So.. I guess I have to ask for a repair or a replacement. But here's the problem. I've changed both the kernel and the ROM and I have to restore the phone to it's original state before taking it to the service. I read the UNroot topic under the development section, but I didn't understand it well. I need to do it through the phone since I can't connect the device to my computer because of the malfunctioning microUSB port. I can't charge the battery either, so I'm stuck with only 36% power and I can't simply shoot in the dark. I turned the phone to save the power and I hope it should be enough to finish the operation, but I don't really know how to start it. I guess I have to download stock kernal and stock ROM and then flash it somehow (Mobile Odin!?), but I'm not sure and I really need your help.
Any help would be highly appreciated, I'll continue looking around for info.
10x in advance
a lot of users suggest others - who are having a similar problem with you, to try cleaning the usb port...
musashiro said:
a lot of users suggest others - who are having a similar problem with you, to try cleaning the usb port...
Click to expand...
Click to collapse
It looks clean. The cable is okay too. I'm working at Gameloft so we have lot's of micro-usb devices and they're working just fine with the exact same PC and cable.
Anyway, to be 100% sure - how to clean the port? I mean - it's so tiny little hole and there isn't any direct access to it.. But I think it's gone.. It randomly shows "charging" while the cable is not plugged at all. Then it stops.. and starts again.
ZeroCGTI said:
Hello, guys.. I'm having a real trouble with my Note. I bought it 3 months ago, but it seems that today's my "lucky" day and the microUSB connector isn't working anymore. At all. No charging, no "usb connected", no mass storage. It's not charging even when I turn off the phone and plug the charger.
So.. I guess I have to ask for a repair or a replacement. But here's the problem. I've changed both the kernel and the ROM and I have to restore the phone to it's original state before taking it to the service. I read the UNroot topic under the development section, but I didn't understand it well. I need to do it through the phone since I can't connect the device to my computer because of the malfunctioning microUSB port. I can't charge the battery either, so I'm stuck with only 36% power and I can't simply shoot in the dark. I turned the phone to save the power and I hope it should be enough to finish the operation, but I don't really know how to start it. I guess I have to download stock kernal and stock ROM and then flash it somehow (Mobile Odin!?), but I'm not sure and I really need your help.
Any help would be highly appreciated, I'll continue looking around for info.
10x in advance
Click to expand...
Click to collapse
Put stock rom on your external sd,install mobile odin pro from market and use it to flash the stock rom.And remember donot select ever root,inject su,inject mobile odin.And after it finish flashing,you can send it for service
Put a stock rom and then try cleaning the USB as someone suggested. My usb port would stop working at random and I cleaned the port with a toothbrush and it has worked ever since. That was 2-3 months ago.
Well, thanks guys.. I'll try the tooth-brush trick when I get home and if it fails to solve the problem, I'm gonna flash the stock ROM with MOP and take it to the service. I'll keep you posted.
ZeroCGTI said:
It looks clean. The cable is okay too. I'm working at Gameloft so we have lot's of micro-usb devices and they're working just fine with the exact same PC and cable.
Anyway, to be 100% sure - how to clean the port? I mean - it's so tiny little hole and there isn't any direct access to it.. But I think it's gone.. It randomly shows "charging" while the cable is not plugged at all. Then it stops.. and starts again.
Click to expand...
Click to collapse
Work at GAMELOFT?!? Tell them to turn off the air push ads in my PAID game Shark Dash (turning them off in settings does ansolutey nothing)... Three emails to your support and NO reply. Pathetic
ZeroCGTI said:
Hello, guys.. I'm having a real trouble with my Note. I bought it 3 months ago, but it seems that today's my "lucky" day and the microUSB connector isn't working anymore. At all. No charging, no "usb connected", no mass storage. It's not charging even when I turn off the phone and plug the charger.
So.. I guess I have to ask for a repair or a replacement. But here's the problem. I've changed both the kernel and the ROM and I have to restore the phone to it's original state before taking it to the service. I read the UNroot topic under the development section, but I didn't understand it well. I need to do it through the phone since I can't connect the device to my computer because of the malfunctioning microUSB port. I can't charge the battery either, so I'm stuck with only 36% power and I can't simply shoot in the dark. I turned the phone to save the power and I hope it should be enough to finish the operation, but I don't really know how to start it. I guess I have to download stock kernal and stock ROM and then flash it somehow (Mobile Odin!?), but I'm not sure and I really need your help.
Any help would be highly appreciated, I'll continue looking around for info.
10x in advance
Click to expand...
Click to collapse
download stock... flash it with mobile odin... dont forget to untick the forever root and cmw injection... ur note will be good as new...
sorry didint see vijays post... he has posted already...
kvsandeepreddy said:
download stock... flash it with mobile odin... dont forget to untick the forever root and cmw injection... ur note will be good as new...
sorry didint see vijays post... he has posted already...
Click to expand...
Click to collapse
If you want bone stock you have to use PC Odin not mobile
Atrix_E said:
If you want bone stock you have to use PC Odin not mobile
Click to expand...
Click to collapse
out of curiosity... what difference do u c when u flash a stock with pc odin or mobile odin???
kvsandeepreddy said:
out of curiosity... what difference do u c when u flash a stock with pc odin or mobile odin???
Click to expand...
Click to collapse
Not a difference you "see" technically. From my understanding mobile Odin cannot touch bootloaders. Pc Odin can. Someone can correct me if I'm wrong. From Chainfires first.post in his Mobile Odin thread, "While in theory Mobile ODIN can repartition and flash EFS and bootloaders, it will cowardly refuse to do so, for your own safety."
Atrix_E said:
If you want bone stock you have to use PC Odin not mobile
Click to expand...
Click to collapse
But his usb port doesnt work
vijai2011 said:
But his usb port doesnt work
Click to expand...
Click to collapse
Hadn't had my coffee yet lol. I woke up to an air push ad asking me to play Shark Dash
Atrix_E said:
Hadn't had my coffee yet lol. I woke up to an air push ad asking me to play Shark Dash
Click to expand...
Click to collapse
Lol go and sleep again thn...
Try another usb cable. You might be able to find one that fit better to the Note.
vijai2011 said:
Lol go and sleep again thn...
Click to expand...
Click to collapse
I'm about to carve up this shark and eat him for breakfast
Assumign that you have a micro SD in the slot-
Take the micro SD out and connect it to your computer. Or use airdroid for file transfer over wifi. Whichever way you use, create a folder called firmware and put the .md5 in the folder and flash it through CWM or mobile odin.
Atrix_E said:
I'm about to carve up this shark and eat him for breakfast
Click to expand...
Click to collapse
I already sent you a personal message.. And I'm not responsible for your problems btw! I'm not customer support after all..
ZeroCGTI said:
I already sent you a personal message.. And I'm not responsible for your problems btw! I'm not customer support after all..
Click to expand...
Click to collapse
Not just my problems but many other paid users if you read the Market comments. I know you're not responsible but if you're QA like you said, technically you are.
Anilisali method will work btw.
Atrix_E said:
Not just my problems but many other paid users if you read the Market comments. I know you're not responsible but if you're QA like you said, technically you are.
Anilisali method will work btw.
Click to expand...
Click to collapse
I'm a WEB-Tester, not a game tester It's not my business at all. Anyway, I asked for your email address if you're willing to get some help from me. Send me a PM and I'll see what I can do for you.
Hi everyone,
I am running out of solutions for my LX1. It is currently running PRA-LX1C432B210, and I am unable to:
Boot fastboot
Detect it with a computer, in any mode (MTP, PTP...)
Use it with Hisuite (the phone is not detected)
I am able to boot to recovery, but it is the Huawei stock, and I can't do much with it. It would not be that bad, if the phone was working properly, but it can't seem to get a good signal anywhere (I'm using an Orange SIM card in France).
This phone is driving me mad... Any idea?
Thanks in advance!
Have you tried another usb cable ? Motherboard can be cause of these problems . Sorry for my bad english
victoriordachi said:
Have you tried another usb cable ? Motherboard can be cause of these problems . Sorry for my bad english
Click to expand...
Click to collapse
Hi! I have tried 4 or 5 different cables, still no luck.
Any idea on how I could check if the MOBO is dead?
Thanks for your help
Spigaw said:
Hi! I have tried 4 or 5 different cables, still no luck.
Any idea on how I could check if the MOBO is dead?
Thanks for your help
Click to expand...
Click to collapse
Charging port cand be faultly . You can charge phone normally ?
victoriordachi said:
Charging port cand be faultly . You can charge phone normally ?
Click to expand...
Click to collapse
Not any problem whatsoever to charge it, but for the benefit of the doubt I ordered a new daughter board to see if it is faulty. It cost me a few €, not a big deal.
Will keep you updated
hi everyone ,I am writing to you because my xiaomi has left me, the dynamic is this has gone out and got stuck on the word andorid. from fastboot I could not do any operation, so I opted for the test point, but the problem is that when I try to flash, miflash tells me cannot receive hello packet, I have tried various versions of miflash and also the various usb ports, but nothing.
can you help me please :crying::crying::crying::crying:
What was the cause? Can you elaborate?
Sometimes change another USB port, USB cable, or another computer would do.
Try them before throw away your device
Sent from my Mi A2 using Tapatalk
K9998 said:
Sometimes change another USB port, USB cable, or another computer would do.
Try them before throw away your device
Sent from my Mi A2 using Tapatalk
Click to expand...
Click to collapse
I've tried everything already,
i was thinking of trying with linux but i don't know
Jemec26 said:
What was the cause? Can you elaborate?
Click to expand...
Click to collapse
the phone fell to the ground, but it worked, I also called, after which it is turned off and always restarts
You may need to take it to the repair shop, seems a hardware issue, like a shortage, if the phone does not respond to the hello packet means that the PC knows is there and knows that is not responding. This is the reason why it keeps restarting itself, battery cannot handle processor voltage and therefore it reboots itself
Jemec26 said:
You may need to take it to the repair shop, seems a hardware issue, like a shortage, if the phone does not respond to the hello packet means that the PC knows is there and knows that is not responding. This is the reason why it keeps restarting itself, battery cannot handle processor voltage and therefore it reboots itself
Click to expand...
Click to collapse
I thought so too, but if I opened the phone to go into EDL mode, the warranty would be violated
darkcombat said:
I thought so too, but if I opened the phone to go into EDL mode, the warranty would be violated
Click to expand...
Click to collapse
Yep. That is why I said repair shop and not service center jejejeje
now my xiaomi turns on the led, but when i try to flash it it says flash done after 1 sec
he recovered,there is no defeat in the heart of those who do not give up
if it fell to the ground it could be a damage to the usb plug, do you know if it worked after the fall ? I mean, data transfer, not only charging
Hi, hope you guys have a good day.
As title mentioned, my device can't use MTP and my pc do nothing when i put usb on my pc port. It's just charge it. That's all. No MTP option. Just it charge. My pc also do nothing. No device software installed icon and nothing happened.
Try to format my device and format my Windows (using Windows 7 convert to Windows 10 and revert back to Windows 7 because my laptop is slow) but still, no luck.
Other function it's fine. Just no MTP not working.
Have somebody experince this before?
Thank you for your reply, have a nice day and stay save.
Hey bro .. drivers need installing or have too changed your usb cable ?
Alex5699 said:
Hey bro .. drivers need installing or have too changed your usb cable ?
Click to expand...
Click to collapse
Hi, thanks for reply
Tried install drivers from Sony website but nothing happened. I use original cable that comes with box, same...no luck. Change with other cable (LDNIO cable), still same.
Sometimes, it detected but mention as "usb not recognized" but it happened in very rare situation.
..and i wonder, is it about water damage on usb or is it software issue or hardware issue? My phone got wash once (wash once with plain water (got sticky choco on screen) since i bought it on december 2020).
hey bro try this. connect your device and open your device manager on your computer. see if any of your drivers have a X on it if it does or doesn't try this driver installer .. its completely safe and I've used it my self
THEDETZ said:
Hi, thanks for reply
Tried install drivers from Sony website but nothing happened. I use original cable that comes with box, same...no luck. Change with other cable (LDNIO cable), still same.
Sometimes, it detected but mention as "usb not recognized" but it happened in very rare situation.
..and i wonder, is it about water damage on usb or is it software issue or hardware issue? My phone got wash once (wash once with plain water (got sticky choco on screen) since i bought it on december 2020).
Click to expand...
Click to collapse
Alex5699 said:
hey bro try this. connect your device and open your device manager on your computer. see if any of your drivers have a X on it if it does or doesn't try this driver installer .. its completely safe and I've used it my self
Click to expand...
Click to collapse
Thanks for your reply, and sorry for late reply,
I've sent my phone for warranty to the shop where i buy it. I've already tried your 1st method but nothing happened but sometimes it says "usb not recognized". Not try the "driver installer" you give since i have sent back my phone for warranty.
I'll keep updated about my phone status in a few days. Thanks bro!
Hi, sorry for late update. Just got my phone, the technician just replace PBA board and my MTP function work again. Only my device not water resistant since they don't replace my back adhesive.
Will do it my self.
Hello Friends...
my Rog Phone 2 is dead as well.... suddenly when i woke up in morning, it doesn't boot up.. it just shows the logo and turns off.. i am able to log in something, maybe recovery.. it has options like recovery mode, restart bootloader etc, but selecting it does nothing.. please see the attached pictures. it does get connected to the laptop and i hear the connect/disconnect sound. i showed to the authorized service center but they also weren't able to do anything. they had only opened it and looked. they hadn't tried starting it like i have attached the pictures..
other problem is that i had also bought the Superpack Suitcase which has all the accessories, the twinview dock, Kunai Gamepad, WiGig Display Dock, Mobile Desktop Dock etc... so without this phone, all that is useless.. i cant even use it with other phones... these accessories aren't used, they are still new i also checked if i could buy second hand Rog Phone 2 but i didnt find anyone selling it anywhere near me.
i dont have much experience in installing the rom and do all that stuff... once i tried with Xolo Q2000 many years back. i did installed the rom back on that but it had lost the imei number. i had tried multiple times but never got the imei back on that phone. it worked perfectly except that no sim used to work. so i am a bit afraid to fiddle with this Rog phone. other than that i have rooted few other phones using apps few years back.
i will check out the forums and see if i can install the Rom and get it working.. i feel its only a software issue as it does start, shows logo and then it doesnt start/load with the rom.. it would be helpful if you guys could advice me and give me any suggestions.. Thank You.
Roxx.R said:
Hello Friends...
my Rog Phone 2 is dead as well.... suddenly when i woke up in morning, it doesn't boot up.. it just shows the logo and turns off.. i am able to log in something, maybe recovery.. it has options like recovery mode, restart bootloader etc, but selecting it does nothing.. please see the attached pictures. it does get connected to the laptop and i hear the connect/disconnect sound. i showed to the authorized service center but they also weren't able to do anything. they had only opened it and looked. they hadn't tried starting it like i have attached the pictures..
other problem is that i had also bought the Superpack Suitcase which has all the accessories, the twinview dock, Kunai Gamepad, WiGig Display Dock, Mobile Desktop Dock etc... so without this phone, all that is useless.. i cant even use it with other phones... these accessories aren't used, they are still new i also checked if i could buy second hand Rog Phone 2 but i didnt find anyone selling it anywhere near me.
i dont have much experience in installing the rom and do all that stuff... once i tried with Xolo Q2000 many years back. i did installed the rom back on that but it had lost the imei number. i had tried multiple times but never got the imei back on that phone. it worked perfectly except that no sim used to work. so i am a bit afraid to fiddle with this Rog phone. other than that i have rooted few other phones using apps few years back.
i will check out the forums and see if i can install the Rom and get it working.. i feel its only a software issue as it does start, shows logo and then it doesnt start/load with the rom.. it would be helpful if you guys could advice me and give me any suggestions.. Thank You.
Click to expand...
Click to collapse
Please follow this video to fix it
mvikrant97 said:
Please follow this video to fix it
Click to expand...
Click to collapse
thank you very much.. but the file is missing on the thread as shown in the video. any idea about it?
Roxx.R said:
thank you very much.. but the file is missing on the thread as shown in the video. any idea about it?
Click to expand...
Click to collapse
Yes the thread poster deleted it for some reason.
mvikrant97 said:
Yes the thread poster deleted it for some reason.
Click to expand...
Click to collapse
that's sad.. if am unable to unbrick my ROG Phone 2 then i have plans to buy ROG 7.. But what about the accessories which are still new and unused... wish if i could use them with other phones by doing some DIY modifications or something.. most importantly the desktop dock and twinview dock... i will keep posting the updates here. sometimes i feel to break it all into pieces and burn it...
untill now i am able to connect the Rog Phone 2 to PC and in Device Manager it shows FastBoot Interface and i have also installed the "MiFlashSetup-Beta" which does shows up a device in it. but i dont have the ROM.. i also tried the ROM from Asus official Support webpage but then MiFlash says that some .bat file is missing. now i am making a EDL Cable as showin in the video in above post.