So, after trying more than a few methods I finally gained root on my TA-1066.
If you also wanna root, here is how:
To Root Nokia 1 (TA-1066) (Pie - Android 9) (Dual SIM)
What you're gonna need:
Working PC,
Some Packet Data,
Some knowledge of ADB & Fastboot commands,
Some storage space for storing Back Up of your phone,
and a Working Brain
WARNING!! ☠I am not responsible for anything goes wrong to your phone by following the steps mentioned in this method. So, please do anything with care and if you don't know what is this, simply Stay away!
Make a Backup Of your phone's Data:
Please make a Back Up of your data stored in your phone tp a safe place in your PC or somewhere in a disk. So, if anything goes wrong you can retrive it back from there.
Now Follow these steps:-
Download attached ⬇ boot.img & keep it in your phone, we'll use it later.
Root boot.img using Magisk:
Download Magisk v25.2 from here.
Install Magisk app and open it.
Tap Install.
click Next.
click Select and Patch a File.
Select boot.img that you downloaded.
click Let's Go. (let the process complete)
Now rooted boot image will be stored in Download folder of your phone, move it your PC.
Install adb and fastboot into your PC
Download the setup file from here.
Unzip and Run it as Admin.
Tap Next until it installs.
Enable developer options and turn on USB Debugging
Goto Settings > System > Advance > About phone > Tap on Build number 7-8 times.
Go back and Tap Developer options > (scroll down) Turn On USB debugging.
Now connect your phone to your PC using USB Data Cable.
A prompt will appear asking permission, Tick Always allow from this computer and Tap OK.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Let the USB Data Cable connected and follow below steps.
In your PC open CMD and start typing these commands:
Confirm that your device is connected:
adb devices
get your serial number by entring this command:
adb shell getprop ro.serialno
calculate md5 of the serial number using this site: https://passwordsgenerator.net/md5-hash-generator/
it'll look something like this D4423199AC65U1237C86D0E6BBF65243M
Reboot to bootloader:
adb reboot bootloader
Unlock using key (md5code=md5 of your serial number):
fastboot oem key md5code
Reboot and Turn on OEM Unlocking:
Settings > System > Advance > Developer options > Turn on OEM Unlocking
Reboot to bootloader:
adb reboot bootloader
Open Device Manager in your PC and follow this video below:
after doing as in video open CMD and type:
fastboot flashing unlock
Quickly press Volume Up button of your phone to unlock flashing.
Flash patched/rooted boot image. (boot.img = patched boot.img path in your PC)
fastboot flash boot boot.img
Reboot your phone to system.
fastboot reboot
Congratulations your Nokia 1 is now ROOTED!! Enjoy!!Hit thanks button if you liked the process.
Feel free to ask any query.
CREDITSMethod taken from this thread by @androidlover5842 , some changes made by me.Thanks @Snoop05 for ADB and Fastboot.Thanks @savadam for video tutorial.
and Me
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Power off your device and go to fastboot mode
First press power button and volume up button at the same time, now you enter into boot mode
Now go to fastboot mode by pressing volume up button for navigation and volume down button for select
2. Download this file and extract it
3. Now connect your mobile through PC and open downloaded file folder, press shift key + right mouse button now go to open command window here
4. Now command window open now all task done in command mode
Type fastboot boot recovery.img
5. Now you enter in philz recovery mode in this go to mount and storage then press mount /system
now type in command window adb root
now type adb remount
now type adb pull /system/build.prop
6. Now go to downloaded file folder in this folder you see build.prop file open this file in Notepad++ and find ro.build.type by press ctrl+f Note: don’t close the command window
7. Now you see user after ro.build.type edit user to userdebug and save it
8. Now go to command windows and type following command
Type adb push build.prop /system/build.prop
Now type adb shell chmod 644 /system/build.prop
Then type adb reboot
9. Now the device has reboot when device booted go to developer option, then find drawing category, then enable multi window option now you can use multi window option.
Source
error:device not found after the command adb root.. i have installed the latest drivers. whats wrong?
Does this will root our device also.?
If this method also root our device then is there any method by which we can get multi window without root?
This processes hard bricked my android one device
I'm follows this process after that my phone hard bricked ( not booting or charging ) how I recover from this hard brick
What of rooted device ?
Any quick method?
Root LeEco Cool 1 Root Cool 1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This tutorial guides to successfully install Custom recovery on Root LeEco Cool 1. It is suggested to take a backup of your ROM before following this guide. This guide will help to instal Clock Work Mode or CWM recovery on Root LeEco Cool 1 only. Please use the provided files and ZIP only. Read all screen before clicking on action keys.
After LeEco acquired Coolpad LeEco launched another Coolpad smartphone with its EUI in Cool 1. The Coolpad Cool 1 is now officially launched in India after a major hype of dual camera at much lesser price. The smartphone is launched at 13,999 INR while in China its prices a bit lesser than that.
Note:
Rooting will void the warranty of your smartphone.
Please follow each and every step carefully to safely root your smartphone without bricking.
We will not be responsible if you brick your smartphone.
Take a backup of your stored files and possible full ROM before rooting.
Make sure you read all steps carefully before doing anything to your smartphone.
Rooting is not illegal but some illegal activities could be engaged after rooting your device.
If you brick your device please mention the issue in comment box we will help you as soon as possible.
Make sure your device is same as mentioned in the article’s title.
Requirements:
Charge your device at least more that 30%.
A USB cable.
Windows Computer.
Patience.
Process 1:
Downloads:
TWRP
Fastboot ZIP
Steps to follow:
Download all files from above links.
Install and configure ADB and Fastboot.
Connect the device to PC via USB cable.
Open the TWRP folder in PC and right click holding the shift key and select “Open command window here.
in Command prompt window type ” adb reboot bootloader”. The device will boot into bootloader mode.
After the device boots up complete type “fastboot flash recovery twrp-2.8….” or after pressing twrp- press the tab key. The process will flash TWRP in your Lenovo K6 Note.
After successful process type “fastboot reboot”. The smartphone will reboot.
Again type “adb reboot recovery” to boot the smartphone in recovery mode.
Process 2:
Download iRoot application from here
Open and Install iRoot from Windows Computer.
Connect your Device via PC
Allow USB debugging in your Mobile (Go to About devcie>tab multiple times in Built Number until you unlock Developer Mode>Turn ON USB debugging.
After turning on USB debugging your device will flash a message allow to use USB debugging.
After iRoot detects your device click on Root.
Wait until the Process is done.( phone will reboot multiple times during the process.)
source: https://gadgetcreed.com
Is this for LeEco Cool1 or Lenovo K6 Note?
Can it be used to root Cool Changer 1c?
I will try to describe exactly what I did. I warn you that if you want to repeat this, then do everything at your own risk!
Original message
1. The cleanest installation possible
We do a COMPLETE cleanup and format the DATA in TWRP not lower than version 3.4... then reboot into bootloader and connect to the PC with a good cable. Run Fastboot on the PC in the command line in turn enter the following commands:
fastboot devices
fastboot erase all
fastboot reboot bootloader
2. Install motoXT1799-2_GLOBAL_2021.02.20_oreo.zip
Use the firmware from here: motoXT1799-2_GLOBAL_2021.02.20_oreo
3. Install Magisk
The latest version of Magic-v22.0.apk must be installed and Magisk-v22.0.zip
4. Go to the developer menu
In the developer menu, we give permissions to unlock the OS bootloader, as well as give permission to debug via USB.
5. Run adb Fastboot on the command line
The phone must be connected to the PC via USB. We enter the command adb devices on the smartphone, a dialog box should appear to allow debugging this device or something like that, respectively, we give permission.
Next, we reboot into the bootloader with the command adb reboot bootloader
6. Blocking
Previously, we copy the stock recovery.img to the folder with adb Fastboot
Enter the commands:
fastboot flash recovery recovery.img
fastbo fastboot flashing lock
We reboot into the system.
7. Delete Magisk as unnecessary
To do this, go to the program select delete see two items select first "restore partitions or something like that" then delete.
8. Do a factory reset
If everything is done correctly, we get a device with Oreo Android 8.1.0 as if it came out of the factory.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
***Mod Announcement: Thread has been locked and download links removed due to XDA GPL violations.***
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I would like to thank TeamWin for their amazing work!
I saw that the newer Samsung MediaTek phones were not getting any sort of love, so I bought one myself to kick start the development.
TWRP is the obvious choice as it is reliable and trustworthy with frequent updates and patches.
INSTALLATION:
Odin Method (Windows):
Step 0: Unlock Device Bootloader by toggling the OEM Unlock option in Developer Options. Device will reboot to Odin mode and will prompt you to long press volume up, device will then unlock bootloader and perform a complete factory reset so make sure to backup any data.
Step 1: Download the unofficial TWRP image from the link attached below.
Step 2: Put the device in Odin download mode by holding VolumeUp+VolumeDown and inserting USB cable after the device is completely shut down.
Step 3: Select the downloaded recovery.tar in AP slot and vbmeta_disabled_R.tar in USERDATA slot, connect the device to PC, go to options and untick "Auto-Reboot"
Step 4: Click START and the Device will get flashed, Odin will say SUCESS!.
Step 5. Exit Download mode by holding VolumeDown+PowerButton and then immediately boot
into Recovery mode by pressing VolumeUp+PowerButton.
Step 6: Congratulations, you have installed TWRP latest for your M32 4G, to access the system now, you need to perform some additional steps.
Step 7: Open up TWRP terminal and then type in "multidisabler" and then perform a full factory reset again by going into "Wipe" -> Format Data -> type "yes"
Step 8: Now stock ROM should work fine with TWRP!
Heimdall Method (Linux):
Step 1: Install heimdall tool on linux , google it.
Step 2: Put the device in Odin download mode by holding VolumeUp+VolumeDown and inserting USB cable after the device is completely shut down.
Step 3: Open up terminal in the downloaded TWRP directory, extract twrp image from recovery.tar
Step 4: Enter the command "heimdall flash --RECOVERY recovery.img --no-reboot" where twrp.img is name of the downloaded image
Step 5. Exit Download mode by holding VolumeDown+PowerButton and then immediately boot
into Recovery mode by pressing VolumeUp+PowerButton.
Step 6: Congratulations, you have installed TWRP latest for your M32 4G, to access the system now, you need to perform some additional steps.
Step 7: Open up TWRP terminal and then type in "multidisabler" and then perform a full factory reset again by going into "Wipe" -> Format Data -> type "yes"
Step 8: Now stock ROM should work fine with TWRP!
COMPATIBILITY:
TWRP Recovery is compatible with latest Android 11-12 firmware
tested on:
M325FXXU3AUK1, M325FXXU4AVB1 ,M325FXXU4BVI2 as well
First time you boot into TWRP, don't forget to backup your EFS, Secondary EFS and NVRAM! Go into Backup and select "EFS,", "Secondary EFS" and "NVRAM" and backup to preferably MicroSDcard and copy it to your PC in case you need it if IMEI corrupts.
DON'T IGNORE THIS STEP!
DOWNLOADS:
VBMETA DISABLED FOR R: ***Link Removed***
TWRP TAR: ***Link Removed***
by [email protected] #PruhBootlooper
@cha0scl0wn
WARNING
This tutorial is only for you who have hardbicked your M3 (BTV-DL09). This is the last option you have. If you still access any method or at least fastboot, please consider to use any other method.
Once again it is the last method to revive your device
As usual DO IT WITH YOUR OWN RISK. I WILL NOT RESPONSIBLE FOR ANY DAMAGE OF YOUR DEVICE
Scenario:
For some reason your device is hardbricked and nothing userfull method suitable to bringging back you device
Tools :
IDT Application can be downloaded here
Board Software can be downloaded here
ADB Software
HUAWEI APP Extractor can be downloaded here
Tools to open your device screen
USB cable
STEP 1:
Revive your device into basic firmware using IDT
Please refer to this tutorial to doing that. Your test point can be found by opening your screen device. please be careful when you open it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This method will bring you to the basic firmware of this device (EMUI 2).
From here, your SIM will be locked. (I'm still dont know how to unlock, but everyting work well)
STEP 2
Update to EMUI 4
To do that you can use one of the following method:
a. Using dload
b. Using fastboot (I use this method because i dont have SD Card or USB OTG ), so i will explain this method.
You can download the firmware here
After downloaded, ectract UPDATE.APP from dload folder using APP Extractor.
Extract following files to your ADB folder:
- BOOT.IMG
- CUST.IMG
- SYSTEM.IMG
- FASTBOOT.IMG
- RECOVERY.IMG
Now we will flash IMG file.
* Boot into fastboot by connecting your device using USB cable
* open CMD then locate to your ADB folder
* type following command
Code:
adb devices
//to check connected devices
adb reboot fastboot
//you rdevice will reboot into fastboot mode
fastboot devices
//check connection
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash fastboot fastboot.img
fastboot reboot
Now disconnect your device. Your device should reboot system and running Android 6 EMUI 4.1
NOTE : First boot will take long time, so be patient
STEP 3
UPDATE TO EMUI 5 ANDROID 7
To do that we need to install TWRP. First you can download this version of TWRP for EMUI 4
You can refer to this tutorial to install TWRP
Download this OEM info
Copy oem info folder to SD Card or USB OTG. Place it in the folder TWRP/BACKUPS/<SERIAL NUMBER>
You can find SERIAL NUMBER on about tablet>>status>>SERIAL NUMBER
Download firmware BTV-DL09C100B307 form here and extract two zip file into SD Card/USB OTG root folder
Put in your SD Card/USB OTG
Now reboot into recovery > restore > locate your OEM info folder > restore.
Install update.zip
Install update_data_full_hw_eu.zip
Wipe
reboot system
First boot will took longer than first boot and you see Huawei logo if success
Congratulation, your device now running Android 7 EMUI 5.0.1
Optional you can install TWRP for android 7 here