Related
What?
A TWRP bootable-image and installer ZIP for stock-based ROM's (i.e. not LOS 15.1) and maybe others (untested).
Based on:
Latest TWRP build provided by @pl_blaze
The official TWRP installation script for Pixel 2 by Dees_Troy (will install to both slots automatically - more resilient than the other TWRP script)
The IMG uses official kernel 8.1.10 so might be flashable (not tested!)
Not compatible with LineageOS 15.1 because it uses some custom update API that isn't in this TWRP. I considered using the LOS 15.1 TWRP build in this, but it's not compatible with stock encryption (it always thinks the passcode is wrong).
Full credits to @pl_blaze and Dees_Troy for this. I just packaged up something new and wrote clear instructions.
Why?
The old TWRP thread is not maintained and people keep asking/reporting the same questions/problems. I will try to keep this up to date as long as necessary. This is also a more robust installation script, using magiskboot binary to unpack/repack the boot image.
How?
Uninstall Magisk first if you have it installed, just to be safe. Or reflash stock boot.img. (Might not be necessary - a dirty flash worked OK for me but YMMV).
Fastboot boot (hotboot) any existing working TWRP image. Don't worry about working encryption/data, we only need kernel access. For example...
Code:
fastboot boot oreo_3.2.2_recovery.img
... which can be downloaded from Google Drive here (thanks to whoever shared this, I think it's a pl_blaze reshare).
Download attachment ZIP installer and flash in hot-booted TWRP (it will flash to both slots)
Reboot to Recovery and (re-)flash Magisk, if you use it.
Profit
@pl_blaze brother always thank you for the contributions that you do without coming to the light .and thanks for you @op to post working twrp for stock
this twrp will work on 7.1.2 ? i'm now on aex rom
Thanks @CosmicDan for starting this thread. I started to implement @pl_blaze changes into the official TWRP but I've been failing miserably (I'm a noob). Can you provide sources for the images?
I can't trust binaries floating all over the internet if it's not from a reliable dev. If you've compiled it yourself I'll give a try.
I reshare this twrp img on Telegram group,I tested it, works without problem
Flash of permaent twrp not tested by me
It's a good twrp!
CosmicDan said:
What?
A TWRP bootable-image and installer ZIP for stock-based ROM's (i.e. not LOS 15.1) and maybe others (untested).
Based on:
Latest TWRP build provided by @pl_blaze
The official TWRP installation script for Pixel 2 by Dees_Troy (will install to both slots automatically - more resilient than the other TWRP script)
The IMG uses official kernel 8.1.10 so might be flashable (not tested!)
Not compatible with LineageOS 15.1 because it uses some custom update API that isn't in this TWRP. I considered using the LOS 15.1 TWRP build in this, but it's not compatible with stock encryption (it always thinks the passcode is wrong).
Full credits to @pl_blaze and Dees_Troy for this. I just packaged up something new and wrote clear instructions.
Why?
The old TWRP thread is not maintained and people keep asking/reporting the same questions/problems. I will try to keep this up to date as long as necessary. This is also a more robust installation script, using magiskboot binary to unpack/repack the boot image.
How?
Uninstall Magisk first if you have it installed, just to be safe. Or reflash stock boot.img. (Might not be necessary - a dirty flash worked OK for me but YMMV).
Fastboot boot (hotboot) any existing working TWRP image. Don't worry about working encryption/data, we only need kernel access. For example...
Code:
fastboot boot oreo_3.2.2_recovery.img
... which can be downloaded from Google Drive here (thanks to whoever shared this, I think it's a pl_blaze reshare).
Download attachment ZIP installer and flash in hot-booted TWRP (it will flash to both slots)
Reboot to Recovery and (re-)flash Magisk, if you use it.
Profit
Click to expand...
Click to collapse
what does mean "hot boot", sorry am novice, Not even he could boot boot recovery from Minimal ADB and fastboot ,,, What am I doing wrong?
View attachment 4438212
teacapan said:
Fastboot boot (hotboot) anwhat does mean "hot boot", sorry am novice, Not even he could boot boot recovery from Minimal ADB and fastboot ,,, What am I doing wrong?
Click to expand...
Click to collapse
Hot boot means you are not flashing the recovery image just running it temporarily. Stock boot image is untouched in this process.
Run
fastboot devices
To check whether your device is connected.
alkesh95 said:
Hot boot means you are not flashing the recovery image just running it temporarily. Stock boot image is untouched in this process.
Run
fastboot devices
To check whether your device is connected.
Click to expand...
Click to collapse
thanks for reply, if you look at the screenshot it looks I am connected, the point is that it does not load the file, it does not find it, so if it does not start in recovery I can not do anything I'm stuck.
teacapan said:
thanks for reply, if you look at the screenshot it looks I am connected, the point is that it does not load the file, it does not find it, so if it does not start in recovery I can not do anything I'm stuck.
Click to expand...
Click to collapse
Did you put your recovery into the fastboot forder?
Did you unpack the zip ?
Also check if the name of recovery image is the same
It's possible to make password for twrp
DELETED.
lef7er1s said:
Did you put your recovery into the fastboot forder?
Did you unpack the zip ?
Also check if the name of recovery image is the same
Click to expand...
Click to collapse
1-yes
2-yes
3-yes
Anyway thanks for try help me.
Yeah well, I'm still stuck where, some help would be very appreciated.
View attachment 4438552
View attachment 4438553
Polluktus said:
this twrp will work on 7.1.2 ? i'm now on aex rom
Click to expand...
Click to collapse
Not sure, I've only tested on stock Oreo. Try and and let us know!
atttoush said:
Thanks @CosmicDan for starting this thread. I started to implement @pl_blaze changes into the official TWRP but I've been failing miserably (I'm a noob). Can you provide sources for the images?
I can't trust binaries floating all over the internet if it's not from a reliable dev. If you've compiled it yourself I'll give a try.
Click to expand...
Click to collapse
Indeed, no I have not compiled it myself - just ripped from pl_blaze.
I have a Oreo source repo cloned now for other reasons, but I might try and compile TWRP myself. Although it's been a couple years since I've tried to compile device-specific stuff from an AOSP tree so I don't know how long that will take.
teacapan said:
thanks for reply, if you look at the screenshot it looks I am connected, the point is that it does not load the file, it does not find it, so if it does not start in recovery I can not do anything I'm stuck.
Click to expand...
Click to collapse
Sounds like you just need to learn more about how to use console tools. You need to make sure the "fastboot boot filename.img" command will have a "filename.img" that matches the img filename in the current directory. This is just an example - substitute "filename.img" for the real filename. Use the CD command to change directory to where the img is.
teacapan said:
Yeah well, I'm still stuck where, some help would be very appreciated.
View attachment 4438552
View attachment 4438553
Click to expand...
Click to collapse
Try renaming the img file to something simpler like oreo_twrp.img
Edit: ah yes, the file you are pointing to has to be in the same directory where you opened cmd window, as cosmicdan stated above
CosmicDan said:
Indeed, no I have not compiled it myself - just ripped from pl_blaze.
I have a Oreo source repo cloned now for other reasons, but I might try and compile TWRP myself. Although it's been a couple years since I've tried to compile device-specific stuff from an AOSP tree so I don't know how long that will take.
Click to expand...
Click to collapse
Glad you open this thread. I'll wait for your compiled version to give it a try
teacapan said:
Yeah well, I'm still stuck where, some help would be very appreciated.
Click to expand...
Click to collapse
I don't know man, these adb and fastboot binaries look old (2014?). Try to get recent ones. And repeat the process.
silv3rfox said:
Glad you open this thread. I'll wait for your compiled version to give it a try
I don't know man, these adb and fastboot binaries look old (2014?). Try to get recent ones. And repeat the process.
Click to expand...
Click to collapse
Thanks, i will.
teacapan said:
Yeah well, I'm still stuck where, some help would be very appreciated.
Click to expand...
Click to collapse
Before flashing recovery
CD C:\Users\YOUR_USERNAME\Desktop\Adb
teacapan said:
Yeah well, I'm still stuck where, some help would be very appreciated.
Click to expand...
Click to collapse
The name of the file is ending with .img, delete ending " .img ", see below that patched_boot without .img in the end
Thanks for this. I checked out the differences between this and the flashable zip I was using (twrp-3.2.1-1-installer-tissot-FIXED_By_DroiDMester) and found this:
Code:
# write the new boot image to boot block
write_boot() {
print "Writing new boot image to memory..."
cd "$tmp"
if $use_dd; then
dd if=boot-new-a.img of="$boot_block"_a
[ $? = 0 ] || abort "Failed to write boot image A! You may need to restore your boot partition"
dd if=boot-new-b.img of="$boot_block"_b
[ $? = 0 ] || abort "Failed to write boot image B! You may need to restore your boot partition"
else
flash_image "$boot_block" boot-new.img
fi
[ $? = 0 ] || abort "Failed to write boot image! You may need to restore your boot partition"
}
This also flashes it into boot_a and boot_b correct?
What other differences does this have over that?
Welcome​First of all make sure You know the Basics which are:
-You need to have a unlocked Bootloader
-You need to have the Orange Fox Recovery installed
-You need to have a Kernel and a Vendor Image
-You need to have a Treble A-Only Generic System Image (GSI)
-(Optional) A actual Magisk Installer zip File
-(Optional) A actual Open GApps Installer zip File
(Just use Google and You will find everything)
Alright. Now to the flashing!
-Make sure You have the needed Basics on Your Device including the Files You want to flash
-Wipe everything including data, caches, system, vendor
-Now flash a Vendor and Kernel Image to Your Device
-(You can download My "Vendor Installer" or)
-Flash a Treble AOSP ROM for Your Device and wipe System again
-Flash the Generic System Image using the Image Install from TWRP
DONE!
If You want to install Root and GApps on Your Device:
-Reboot to the Recovery and wipe Data/Caches again
-Install Magisk and GApps (Nothing else yet)
-Reboot to the System
DONE!
This Thread will be updated from Time to Time with new Vendor Installers and better Instructions. Feel free to talk about GSI ROMs in this Thread. I will keep it moderated as good as i can!
Download Links:
https://sourceforge.net/projects/orangefox/files
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Vendor Installer from Me: https://drive.google.com/drive/folders/1onzbCmoy18WlNDNFpq67z0Bv7QHB1d-b?usp=sharing
Actual Vendor: OMNI with EAS Kernel
Hello, I can not flash this vendor file. The orange fox returns ERROR7
q13017 said:
Hello, I can not flash this vendor file. The orange fox returns ERROR7
Click to expand...
Click to collapse
There is a more actual thread around the Mix 2 Forum. Try to search for it over Google, it provides more actual Vendors if i'm not wrong
Hi all! has someone managed to install and use the Pixel experience GSI image? It's stuck on the google logo loading screen for me, maybe i need another vendor?
Atcastells said:
Hi all! has someone managed to install and use the Pixel experience GSI image? It's stuck on the google logo loading screen for me, maybe i need another vendor?
Click to expand...
Click to collapse
Same issue here - the last working version is from March 2019.
If I put a gsi with a vendor from custom firmware, will my phone die?
About
I've found information about flashing GSI's on this phone to be fragmented so here's a collection of resources that have worked for me.
If you have any suggestions or issues with popular GSI ROMs, drop them here and I'll do my best to update the thread.
Note: This guide is for users who have already flashed custom ROMs (not necessarily GSI) to their phone. If you're new to this or are coming from any MIUI ROM, please see other tutorials.
Click to expand...
Click to collapse
GSI Installation
1. Flash TWRP
The current latest version (as of the time of writing v3.3.0) supports for flashing GSIs.
2. Update firmware (optional)
I'm currently using the latest global firmware (as of time of writing v10.2.2.0) which seems to work fine. Download the zip from xiaomifirmwareupdater and flash in TWRP.
3. Flash treble BOOT and VENDOR partitions
Download the below image files (source).
boot.img
vendor.img
Install the images by using the following command or optionally using TWRP.
Code:
fastboot flash boot boot.img
fastboot flash vendor vendor.img
4. Flash your GSI ROM
Pick a GSI from the Treble forum and be sure to download an ARM64 and A-Only variant. If the downloaded file is an archive (not an *.img file) you will need to extract the contents.
Go into TWRP
Copy the GSI image to your phone
Wipe "Dalvic/ART Cache", "Cache", "System" and "Data" paritions
Install the GSI image to the System Partition (Install -> Install Image -> yourimagefile.img - System Image)
Reboot back into TWRP
Resize the system partition (Wipe -> Advanced Wipe -> check System -> partition options -> Resize FS)
Install Magisk & OpenGapps (both optional)
GSI ROMs
Pixel Experience 9 (2019-03-24)
Source: XDA
Status: Working.
Additional info: Everything works as expected.
AospExtended v6.2 (20190313)
Source: aospextended
Status: Working.
Additional info: Everything works as expected.
Ressurection Remix v7 (19/04/16)
Source: XDA
Status: Unusable.
Additional info: Everything works aside from video playback (which creates a loud popping/static sound regardless of audio levels).
Has someone tried oui ??
Great guide! Thanks a lot, your way was the only way I could get a treble rom working on the device! I wasn't able to flash the vendor in fastboot coming from miui 10.2.2.0, but it worked from twrp. Now got Havoc booted successfully
has anyone tried q gsi?
xeodm said:
has anyone tried q gsi?
Click to expand...
Click to collapse
If you want to use it, try it out. There's no reason it shouldn't work ?
Anyone successfully flashed Android Q beta 5 GSI?
I tried my best, but it is not booting up!
djmanri3 said:
Has someone tried oui ??
Click to expand...
Click to collapse
I'm going to try it later. I will update if it works.
djmanri3 said:
Has someone tried oui ??
Click to expand...
Click to collapse
Unfortunately, it doesn't boot. I want to try it too !
salahmed said:
Anyone successfully flashed Android Q beta 5 GSI?
I tried my best, but it is not booting up!
Click to expand...
Click to collapse
I remember someone saying u need to use permissiver 3 or 4
gsser said:
I remember someone saying u need to use permissiver 3 or 4
Click to expand...
Click to collapse
Do you have a link?
Regards
salahmed said:
Do you have a link?
Regards
Click to expand...
Click to collapse
I dont have any unfortunately, it might be in erfano's telegram group or mix 2 aosp group.
I'm Stuck Help!
I'm stuck on AOSP EX Boot Animation, What to do now?
I did all right!!
Why is this happening
Fix for the audio problem
andythedev said:
About
I've found information about flashing GSI's on this phone to be fragmented so here's a collection of resources that have worked for me.
If you have any suggestions or issues with popular GSI ROMs, drop them here and I'll do my best to update the thread.
GSI Installation
1. Flash TWRP
The current latest version (as of the time of writing v3.3.0) supports for flashing GSIs.
2. Update firmware (optional)
I'm currently using the latest global firmware (as of time of writing v10.2.2.0) which seems to work fine. Download the zip from xiaomifirmwareupdater and flash in TWRP.
3. Flash treble BOOT and VENDOR partitions
Download the below image files (source).
boot.img
vendor.img
Install the images by using the following command or optionally using TWRP.
Code:
fastboot flash boot boot.img
fastboot flash vendor vendor.img
4. Flash your GSI ROM
Pick a GSI from the Treble forum and be sure to download an ARM64 and A-Only variant. If the downloaded file is an archive (not an *.img file) you will need to extract the contents.
Go into TWRP
Copy the GSI image to your phone
Wipe "Dalvic/ART Cache", "Cache", "System" and "Data" paritions
Install the GSI image to the System Partition (Install -> Install Image -> yourimagefile.img - System Image)
Reboot back into TWRP
Resize the system partition (Wipe -> Advanced Wipe -> check System -> partition options -> Resize FS)
Install Magisk & OpenGapps (both optional)
GSI ROMs
Pixel Experience 9 (2019-03-24)
Source: XDA
Status: Working.
Additional info: Everything works as expected.
AospExtended v6.2 (20190313)
Source: aospextended
Status: Working.
Additional info: Everything works as expected.
Ressurection Remix v7 (19/04/16)
Source: XDA
Status: Unusable.
Additional info: Everything works aside from video playback (which creates a loud popping/static sound regardless of audio levels).
Click to expand...
Click to collapse
https://github.com/hmuny99/GsiSystemAudioFix
Use this flashable zip to fix the audio stuttering issue.
Someone tried it with the Q GSI's from Erfan? I can't get it to work....
pattagalix said:
Someone tried it with the Q GSI's from Erfan? I can't get it to work....
Click to expand...
Click to collapse
Not with Efran's gsi's but I've tried a few times on other 10's and had no luck on my end. I Used the 10 gsi Aonly 64 bit and I've formatted data and decrypted using Zach's force encrypt removal zip and magisk su zip and I've tried without removing encryption and no luck. It hangs on mi boot logo every time. I saw a DerpFest gsi on telegram that's when this whole gsi mission began for me. lol. Maybe we need a different boot.img and vendor.img for 10 idk? ? I tried with and without flashing the boot and vendor, decrypt and not decrypt and no go. ?
Sent from my moto g(7) power using XDA Labs
I booted RR v7.03 from Luke's GSI thread using vendor and boot in op but tried a few more 10 GSIs and they either hang on mi screen or bootloop forever. This RR is bad ass!! V7.03 wasn't made for Chiron and blows 7.02 off the map. Although security patch is from November 2019 I'm going to rock it a while. Sure will miss RR now that main dev stopped. Talk about a bad ass ROM!!! If anyone wants to use it its here. Just click the top link and you'll see the A only 64
https://forum.xda-developers.com/pr...iscussion/gsi-expressluke-built-gsis-t4003457
Guys I successfully installed HAVOC-OS located https://forum.xda-developers.com/project-treble/trebleenabled-device-development/gsi-havoc-os-t3930030. The steps I followed are mentioned below
1. Wipe everything except internal storage.
2. Flashed BRK3 Vendor https://mega.nz/#F!wFFQUYbI!GZvNOBSn1wVn8U9mQDzBiw!IQsjlYzA
2. Installed Endurance GSI kernel https://forum.xda-developers.com/galaxy-s9/samsung-galaxy-s9--s9-cross-device-development/kernel-endurance-kernel-v1-0-t3849434
3. Flashed the system image for ARM 64 A only
4. Boot system
5. Reboot to recovery and Flashed Mgisk
6. Gapps will fail to install at first. Just goto wipe -> Adv wipe -> system partition -> Resize. Reboot to recovery and flash Gapps
7. Reboot and enjoy
8. You can test other GSI Roms also and report. The thread is located at https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Thanks buddy. I was looking for the ways to run the GSI. And the method works. Good job
thanks for the guide! im still on an unrooted s9, but if everything works ill definetly make the jump. Can you tell us more about stability, bugs and if there are things not working
So after testing the ROM for 2 days I can say that
1. It is very stable and can be used as a daily driver
2. Everything works, I am not sure about Bluetooth audio though, haven't checked it
3. It can be heavily customized. Unlike LOS, where we have only few of these features available
4. Battery life is the best I got using any other ROM out there (check the screens below). and I am the guy who gets 3 hrs of SOT, when others claimed 5+ hrs on the same ROM.
5. Security patch is latest even as compared to the TW ROMs
6. Regarding camera... Its the same as LOS pie. Use gcam by idan 3.5 fixed and you are good to go.
fingerprint working?
andreMusers said:
fingerprint working?
Click to expand...
Click to collapse
Yes it is
Thanks for trying this out. I'm only a few months in with my exynos S9 on android pie, so I haven't yet learned the details about rooting/recovery for this phone.
I'll wait for your next update regarding daily use, and would love a more detailed step-by-step for installation if that's not too much trouble. I'm honestly loving those screenshots.
How about IMEI, BRK3 Vendor safe..?
Ok here is the detailed tutorial on how to install a GSI rom
1. First you need to wipe everything in TWRP. Just like you do, when you clean flash any rom
2. Than install the BRK3 vendor. Link is provided by the OP. It's a flashable zip file so just flash it like any other zip.
3. Flash the Endurance GSI kernel. Link is in the OP.
4. Next, download the GSI rom from the link in the OP. Remember to download the ARM 64 A-only variant.
5. Extract the files and you should get a . Img file. Copy that in the SD card
6. In the TWRP, goto install. Select flash image from the bottom right corner of your screen. Now browse the image file, that you copied and choose system image and install.
7. Boot to the system and than boot back to the recovery.
8. Now flash the magisk
9. If you try to install gapps, it will give an error regarding space. So just goto wipe -> advance wipe > system repartition > resize
After resize, you will be able to install gapps.
Flash gapps, automatic brightness fix ( link in the rom thread), AOD fix ( link in the rom thread) and reboot.
burninitup said:
Ok here is the detailed tutorial on how to install a GSI rom
1. First you need to wipe everything in TWRP. Just like you do, when you clean flash any rom
2. Than install the BRK3 vendor. Link is provided by the OP. It's a flashable zip file so just flash it like any other zip.
3. Flash the Endurance GSI kernel. Link is in the OP.
4. Next, download the GSI rom from the link in the OP. Remember to download the ARM 64 A-only variant.
5. Extract the files and you should get a . Img file. Copy that in the SD card
6. In the TWRP, goto install. Select flash image from the bottom right corner of your screen. Now browse the image file, that you copied and choose system image and install.
7. Boot to the system and than boot back to the recovery.
8. Now flash the magisk
9. If you try to install gapps, it will give an error regarding space. So just goto wipe -> advance wipe > system repartition > resize
After resize, you will be able to install gapps.
Flash gapps, automatic brightness fix ( link in the rom thread), AOD fix ( link in the rom thread) and reboot.
Click to expand...
Click to collapse
Thanks for the extra instruction man, will test this out soon.
burninitup said:
Ok here is the detailed tutorial on how to install a GSI rom
1. First you need to wipe everything in TWRP. Just like you do, when you clean flash any rom
2. Than install the BRK3 vendor. Link is provided by the OP. It's a flashable zip file so just flash it like any other zip.
3. Flash the Endurance GSI kernel. Link is in the OP.
4. Next, download the GSI rom from the link in the OP. Remember to download the ARM 64 A-only variant.
5. Extract the files and you should get a . Img file. Copy that in the SD card
6. In the TWRP, goto install. Select flash image from the bottom right corner of your screen. Now browse the image file, that you copied and choose system image and install.
7. Boot to the system and than boot back to the recovery.
8. Now flash the magisk
9. If you try to install gapps, it will give an error regarding space. So just goto wipe -> advance wipe > system repartition > resize
After resize, you will be able to install gapps.
Flash gapps, automatic brightness fix ( link in the rom thread), AOD fix ( link in the rom thread) and reboot.
Click to expand...
Click to collapse
Doesn't work. Stuck on boot logo, loading forever.
Zwulf said:
Doesn't work. Stuck on boot logo, loading forever.
Click to expand...
Click to collapse
me too dont know any fix
EDIT: Somehow i managed to boot the rom but sim won't get detected
Double tap and AOD - work correctly? On snap it does not work well
My Baseband version is now unknown
I have an SM-G960F and its german
EDIT:I just flashed the latest firmware from soldier and now sim card gets detected
Masterofchicken said:
My Baseband version is now unknown
I have an SM-G960F and its german
EDIT:I just flashed the latest firmware from soldier and now sim card gets detected
Click to expand...
Click to collapse
So camera isn't working ,root is still present with magisk and i couldn't disable it with the adb command so safetynet doesn't pass ,i'll say it's not really usable ?
Has anyone found a fix for getting stuck at the s9 logo?..wanting to move to GSI ROMs
I have tried this,
After flash GSI rom, reboot recovery, reboot system and I have bootloop with the first logo Galaxy S9. Can anybody please help me?
@arunrawat2112
Finally I was able to flash some roms but none of them work properly. Can you please help me?
Steps to install Treble ROMs on Galaxy J7 Prime.
Prerequisite:
1. Flash TWRP recovery. For Treble Project I suggest version 3.2.1 here because there is an issue about mounting /preload partition with 3.2.3+. You can try newer versions for your choices. If you see /preload error, Some suggested to ignore this error.
2. For emergency, please download Stock ROM here. If you accidentally mess up your partitions or consistently bricks, Stock ROM will reset everything back to start.
Needed Files:
1. Files from Project Spaget X here.
Exynos7870_CreateVendor.zip is to create /vendor partition.
Exynos7870_ProjectSpaget_V3.0.zip is to install necessary for Treble Project.
Exynos7870_RevertVendor.zip is to delete /vendor partition, in case of uninstalling Treble Project.
2. Treble ROM with ARM64 A only here. My favorite Treble ROMs are Lineage, Arrow and Havoc. I am currently using Arrow.
3. ARM64 GAPPS here.
4. Kraken Kernal here or here. Please download for Treble only. RC12 is universal.
5. Magisk here.
Step I Flash Treble project:
1. boot TWRP recovery
2. wipe Data, Cache, Dalvik, System
3. flash Exynos7870_CreateVendor.zip and reboot to recovery
4. flash Exynos7870_ProjectSpaget_V3.0.zip
Step II Flash Treble ROM:
1. flash Treble ROM ARM64 A only, no need to reboot to recovery in order to install the ROM.
Edit: Reboot to Recovery > Install > press Install Image > choose your Rom.img
2. After flashing the ROM, I usually reboot to system in order to test whether or not the flashed ROM can boot nicely.
2.1 If the flashed ROM cannot boot or brick or bootloop in Logo, press Home + Power + Vol Down to force reboot to Bootloader and boot to recovery.
2.2 Back to recovery. wipe Data, Cache, Dalvik, System
2.3 flash Exynos7870_ProjectSpaget_V3.0.zip before flashing new Treble ROM.
Step III Flash ARM64 GAPPS:
1. Choose Wipe > Advanced Wipe > choose System > Repair > Resize. Sometimes you need to do this twice in order to resize since the first time will show error.
2. flash GAPPS
Step IV Flash Kraken Kernal:
1. Mount > System and Vendor partitions
2. flash KRAKEN-Kernel-RC12-universal7870-Treble-20200314.zip (The latest version of Kraken)
3. reboot to system
I usually reboot once to system before flashing Magisk.
Step V Flash Magisk:
1. Mount > System and Vendor partitions
2. flash Magisk to root
3. reboot to system
4. run Play Store and set up your account
5. run Magisk Manager. When you press Tap to start SafetyNet check, you will find out that ctsProfile: false.
Please note that Usually it will be installed when you have GAPPS installed. If not, you can install Magisk Manager manually.
6. choose Downloads > search "SafetyPatch by hackintosh" > download and install > reboot This will fix ctsProfile false to be true.
Now you are done the basice steps to flash Treble ROMs for your J7 Prime. Any questions please leave a message under the thread.
Cheers, :highfive::highfive::highfive:
Thanks for your helpful post, but when i tried to flash system.img via TWRP, it showed just boot and recovery partition, i cant see system partition to choose, please help me. Thank you and sorry for my bad English
---------- Post added at 05:11 PM ---------- Previous post was at 04:53 PM ----------
dctviphb2 said:
Thanks for your helpful post, but when i tried to flash system.img via TWRP, it showed just boot and recovery partition, i cant see system partition to choose, please help me. Thank you and sorry for my bad English
Click to expand...
Click to collapse
i can flash now but when i flashed system.img completed, TWRP said that no OS installed, what can i do. thanks for your help
dctviphb2 said:
Thanks for your helpful post, but when i tried to flash system.img via TWRP, it showed just boot and recovery partition, i cant see system partition to choose, please help me. Thank you and sorry for my bad English
---------- Post added at 05:11 PM ---------- Previous post was at 04:53 PM ----------
i can flash now but when i flashed system.img completed, TWRP said that no OS installed, what can i do. thanks for your help
Click to expand...
Click to collapse
Please follow the attached screentshot.
1. In the main menu of TWRP, choose Install.
2. Choose your ROM.img
3. Select System Image. This step will tell TWRP to flash your ROM.img to the /system partition.
Note: Attached Screenshots #1-3 is to show steps to mount your /system and /vendor partition. Before your can do these steps, you need to flash Spaget X in the step I of my original post.
Hope this help.
siamese007 said:
Please follow the attached screentshot.
1. In the main menu of TWRP, choose Install.
2. Choose your ROM.img
3. Select System Image. This step will tell TWRP to flash your ROM.img to the /system partition.
Note: Attached Screenshots #1-3 is to show steps to mount your /system and /vendor partition. Before your can do these steps, you need to flash Spaget X in the step I of my original post.
Hope this help.
Click to expand...
Click to collapse
Thank you. I just remember that when i flash spaget my TWRP said "symlink: some symlink faild. Error 7". I have tried both TWRP 3.2.1 and 3.2.3 but both of them didnot work. I think i will try another version, or if you have any idea please tell me. Thank you so much
dctviphb2 said:
Thank you. I just remember that when i flash spaget my TWRP said "symlink: some symlink faild. Error 7". I have tried both TWRP 3.2.1 and 3.2.3 but both of them didnot work. I think i will try another version, or if you have any idea please tell me. Thank you so much
Click to expand...
Click to collapse
You're welcome. I honestly never experience this kind of error.
I found a solution about this error on youtube.
This solution is to extract ROM file and edit updater-script file with notepad++.
Edit: try this Spaget X file. I followed this youtube tutorial trying to fix error 7 that you got when flashing Spaget X.
Another possibility of this error is Partition messed up.
I would try to flash stock ROM with Odin to reset everything to factory default.
Caution: Back up your data before flashing Stock ROM.
Follow the instruction of how to flash Stock ROM in the Stock ROM page or here. Flashing Stock ROM will also remove TWRP recovery and re-partition.
Hope one of this solution help, :highfive::highfive::highfive:
Thank you so much. I think the problem is I am using HROM, which has Repatition.zip, so I think that my partition has messed up, that the reason I face the issue. I will try to solve it with your idea. Thanks so much for helping me, if I can solve the problem I will tell you
Thanks for your helping, after having flashed PIT files I has installed ArrowOS. I found that if TWRP show "No OS installed" after flashing ROM.img we must flash Spaget again to boot normally. Anyway I found that ArrowOS when I turn off screen for a while, when turn it on, it takes about 5s to screen on, do u have any solution? anyway tks so much
dctviphb2 said:
Thanks for your helping, after having flashed PIT files I has installed ArrowOS. I found that if TWRP show "No OS installed" after flashing ROM.img we must flash Spaget again to boot normally. Anyway I found that ArrowOS when I turn off screen for a while, when turn it on, it takes about 5s to screen on, do u have any solution? anyway tks so much
Click to expand...
Click to collapse
That's great NEWS. You've managed to find a solution for No OS installed error.
By the way, for the deep sleep problem that you mentioned, I also experience the same thing. My solution is to press home button to immediately wake the phone up from deep sleep.
[HELP]Treble Incompatible device (J7 PRIME)
I'm also using J7 prime G610F...but when i used Treble Checker is showed my device is Treble Incompatible...I don't understand why it is not working for me while you guys have the same phone and its working...also i'm using a custom rom (reserruction remix) so perhaps should i load up my stock system then try? I also tried to install the Treble project using the steps above but i couldn't flash the image...twrp was only detecting zip files and when i clicked in INSTALL IMAGE it would.nt show any image file which i transferred in my phone
hussain_mdj said:
I'm also using J7 prime G610F...but when i used Treble Checker is showed my device is Treble Incompatible...I don't understand why it is not working for me while you guys have the same phone and its working...also i'm using a custom rom (reserruction remix) so perhaps should i load up my stock system then try? I also tried to install the Treble project using the steps above but i couldn't flash the image...twrp was only detecting zip files and when i clicked in INSTALL IMAGE it would.nt show any image file which i transferred in my phone
Click to expand...
Click to collapse
Unpack .xz file
TWRP still doesn't detect the image
thanhphat95 said:
Unpack .xz file
Click to expand...
Click to collapse
...
---------- Post added at 12:53 AM ---------- Previous post was at 12:48 AM ----------
thanhphat95 said:
Unpack .xz file
Click to expand...
Click to collapse
i'm dummy dum so forgive and thenk
dctviphb2 said:
Thanks for your helping, after having flashed PIT files I has installed ArrowOS. I found that if TWRP show "No OS installed" after flashing ROM.img we must flash Spaget again to boot normally. Anyway I found that ArrowOS when I turn off screen for a while, when turn it on, it takes about 5s to screen on, do u have any solution? anyway tks so much
Click to expand...
Click to collapse
There is a solution...in phh treble settings go to doze then turn on out of pocket feature....works like a charm for me.....
------------
HAPPY TO HELP..