My MI A2 keeps rebooting into TWRP Recovery. - Xiaomi 6X (Wayne) ROMs, Kernels, Recoveries, & Oth

Hi there XDA, I am having a strange problem.
Recently I installed TWRP custom recovery, at frist it was working perfectly,
but after some boots, my phone keeps booting into twrp recovery, but more strange thing is that the screen is freezed and I don't see the interface of TWRP also.
What I tried ,was I have 3 files of TWRP( 3 different versions- 3.3.1-0-jasmine_sprout , 3.6.2_9-0-jasmine_sprout , 3.7.0_9-0-jasmine_sprout) , so i booted my phone to fastboot and i booted it to TWRP-3.7.0_9-0-jasmine_sprout.img which i had in my laptop, this file ran and i got the twrp interface then tried installing all other version but that still didn't help.
Currently I have installed 3.3.1-0 TWRP
Can you guys please help me out
Regards,

rraghuvanshi said:
(...)
Currently I have installed 3.3.1-0 TWRP
(...)
Click to expand...
Click to collapse
I didn't understand. Does this version work well?

Related

(Xiaomi Mi5) TWRP not loading and stuck in bootloop

Device:
Xiaomi Mi 5 32gb (Not pro)
Rom: Cyanogenmod 13
After flashing CM, my phone was stuck in a bootloop. So I decided to do the standard wipe in TWRP, and then reflash CM. My phone is still stuck in the bootloop, and now TWRP won't load. I tried flashing a newer version of TWRP 3.0.2-1, but booting into recovery still gives me the same "loading page". What should I do?
Also, I made the noob mistake of making no backups.
Edit: TWRP is now loading, but I'm still stuck with CM bootloop.
TWRP 3.0.2.0 works fine for me. I also had problems with 3.0.2.1 no touch input possible
How did you get out of the TWRP boot loop? I'm in the same situation. Your help would be appreciated.
Sent from my MI 5 using XDA Free mobile app
Edit: I reflashed 3.0.2-0 using fastboot and now it works fine. Looks like Xiaomi.eu ROM automatically installs 3.0.2-1. Reflashing 2-0 can correct it. Somehow the recovery booting takes some time ... Don't panic.
Me too. I have problem with recovery for mi5.
I enter recovery but it said cannot mount data. I cannot install other rom.
Can yoy help me???
i had the same problem with cm13 and trwp 3.0.2.1
to leave the loop just press the on button long time and try to flash to trwp 3.0.2.0 in fastboot.
Over all i just was able to flash the ressurection rom. the cm13 i stoped after 35 minutes of loading.
Ressurection works fine for me.

TWRP not installing

Hey folks,
I've been trying to install TWRP on my Mi5, MIUI 8 Global 7.1.19 Beta, and I cannot, for the life of me, get it to work.
I've tried the standard method via Fastboot, which boots into TWRP but then defaults back to the standard Xiaomi recovery when I reboot. I've scoured the MIUI forums and these forums here and tried the solutions suggested, such as the Cofface.img and Flasher toolkit (When using the toolkit it says it has completed successfully and says "you are now in TWRP xxxxx" but the device remains in Fastboot mode and doesn't even reboot) etc., but none of them work! Each and every time the device falls back to the standard recovery and I'm left with more grey hair.
Does anyone know of any other solutions or ideas?
Thanks in advance.
What TWRP version ?
Did you try the modified version that is available in the miUI forum? xz.. something...
There is also a guide for it (on the miUI).
glogal said:
What TWRP version ?
Did you try the modified version that is available in the miUI forum? xz.. something...
There is also a guide for it (on the miUI).
Click to expand...
Click to collapse
Cheers for the info, mate. Yes, I've tried the modded version (the cofface version and TWR 3.0.2.X), 3.0.2.1. wouldn't open when I was able to boot into it (once), it just stuck at the splash screen and 3.0.2.0 won't even boot, let alone install.
Cheers mate!
TWRP is now at 3.0.2-3
This is the webpage (official twrp site):https://twrp.me/devices/xiaomimi5.html
The modified version is the ZCX-TWRP: http://en.miui.com/thread-364569-1-1.html
Thanks! I managed to boot into 3.0.2-3 to flash the EU ROM I wanted. I'll have a quick reboot now and see if the recovery has stuck.
Edit
Yep. I managed to boot into 3.0.2-3, install the ROM and the recovery is fine too. Cheers, man. I appreciate the help.
Same problem...
Console tells me everything is well but there is no twrp... Tryed newest version.
Never mind. Had to boot into TWRP as a last step.
"adb reboot recovery"

TWRP not working

I flashed twrp using fastboot mode , but the twrp is not showing the internal storage of the phone and now the phone is facing problem in booting up , I tried flashing twrp 3.0.3 and 3.1.0 but none of them works and twrp is not able to format the phone too as it is not able to mount the internal storage , Guyz please suggest some solution
Can you flash it through adb? That's how I flashed mine this morning and it worked great
What ROM were you using before flashing TWRP 3.1.0? Try version 3.0.4-1, it had the greatest compatibility.
Anova's Origin said:
What ROM were you using before flashing TWRP 3.1.0? Try version 3.0.4-1, it had the greatest compatibility.
Click to expand...
Click to collapse
Thanks for ur help, I tried it with oxygen open beta 3, the problem got sorted by flashing it 3 more times by fastboot method, I guess it was some compatibility issue, TWRP 3.1.0 is now working fine but still the phone is facing prob like now it first takes me fastboot and from there I have to boot my phone.

Stuck at boot screen after twrp install MIUI 9

the problem im having is after upgrading to the latest 9.2.3 firmware when i try to install TWRP everything goes fine but the phone refuses to go past boot screen. I i can boot into TWRP with no problem at all but if i try booting the phone it just gets stuck at the boot logo.. So then i reverted back to the 9.1.1 firmware and now the problem has started there as well. anyone have any idea what im doing wrong?
PS: iv used 3.0.3, 3.1.1 and 3.2.1 none work
Hey after flashing TWRP your supposed to flash lazyflasher.zip if your running MIUI or you'll be stuck at the MI logo. This is a completely normal problem, nothing to worry about. Boot into TWRP and flash the lazyfalsher zip and your MIUI will be up and running. You can download it here
Bro after flashing twrp. Go inside twrp, options/settings, advanced, click on fix boot/disable verification something like that. Thats all It will boot.
hey thank man i just followed what you said and its working fine now
hey thanks for the reply i got it working
Glad it worked. Happy flashing!

Can't access twrp 3.4.0.1, H870

Hello,
I've installed twrp 3.4.0.1 via fastboot, but after I select yes when i'm asked about erasing my data, the phone just boot up normally without deleting any of my data, but does not enter twrp either. Tried 3.4.0.0 too, no luck. Only 3.3.1.0 worked, but when I try to backup it says something like 'can't mount system partition' and some other errors. I think that version is too old for my rom, so I'm afraid to use it for backup/flash. My phone is LG G6 H870, Android 9, software version V30b. The phone is not rooted, the bootloader is unlocked. Tried to erase cache partition and install twrp 3.4.01 again, didn't work. I can't install Skyhawk or Orangefox becuase I can't use twrp.
Is anybody facing this problem too?
Thanks!
Bootloader unlocked?
Mendoo said:
Bootloader unlocked?
Click to expand...
Click to collapse
Yes
Thelock1 said:
Hello,
I've installed twrp 3.4.0.1 via fastboot, but after I select yes when i'm asked about erasing my data, the phone just boot up normally. Tried 3.4.0.0 too, no luck. Only 3.3.1.0 worked, but when I try to backup it says something like 'can't mount system partition', I think that version is too old for my rom. My phone is LG G6 H870, Android 9, software version V30b. My phone is not rooted.
Is anybody facing this problem too?
Thanks!
Click to expand...
Click to collapse
HI You need to use OrangeFox recovery or SkyHawk. If you plan to go to 10, then you need SkyHawk. And I think SkyHawk is maintained but OrangeFox not.
Links:
SkyHawk https://sourceforge.net/projects/pa-g6/files/Releases/SHRP/20.07.2020/H870/
OrangeFox https://forum.xda-developers.com/lg-g6/development/recovery-orangefox-recovery-project-t3943594
jis251 said:
HI You need to use OrangeFox recovery or SkyHawk. If you plan to go to 10, then you need SkyHawk. And I think SkyHawk is maintained but OrangeFox not.
Links:
SkyHawk https://sourceforge.net/projects/pa-g6/files/Releases/SHRP/20.07.2020/H870/
OrangeFox https://forum.xda-developers.com/lg-g6/development/recovery-orangefox-recovery-project-t3943594
Click to expand...
Click to collapse
So can I install SkyHawk via fastboot over stock recovery without installing twrp beforehand? I see there are multiple files in the shyhawk zip, should I only extract the recovery img and install it via fastboot? I'm kinda new to this, thanks!
Thelock1 said:
So can I install SkyHawk via fastboot over stock recovery without installing twrp beforehand? I see there are multiple files in the shyhawk zip, should I only extract the recovery img and install it via fastboot? I'm kinda new to this, thanks!
Click to expand...
Click to collapse
HI. It is made to flash in TWRP (same as OrangFox) So I really don't know if that recovery.img flashing through Fastboot works. Never tried, sorry.
Maybe someone knows though.
jis251 said:
HI. It is made to flash in TWRP (same as OrangFox) So I really don't know if that recovery.img flashing through Fastboot works. Never tried, sorry.
Maybe someone knows though.
Click to expand...
Click to collapse
Ok, thanks, I'll try to find a solution, or maybe I'll just wait for the next version of twrp.
You should try installing the recovery and immediately installing any custom rom, when i flashed twrp the first time i had to do it several times cause somehow it got "erased" every time i noot the stock OS.
Ig you don't want to install a custom rom try right after installing twrp and on the fastboot screen to reboot to recovery with (Volume - ) button and power.
I think the idea is not letting the Stock os boot
Also that error. i have the same problem, the only moment it doesn't appear is when you wipe all data with the "Format Data" option inside "Wipe" menu in twrp.
After you boot to the OS once and go back to recovery it will come again everytime you flash something.
Not sure if its a problem or not, because i've dirty installed some updates and also installed gapps and magisk even with that error.
Im currently in A10 using Havoc and NikGapps.
TWRP 3.2.3-0
AlejandroMota said:
You should try installing the recovery and immediately installing any custom rom, when i flashed twrp the first time i had to do it several times cause somehow it got "erased" every time i noot the stock OS.
Ig you don't want to install a custom rom try right after installing twrp and on the fastboot screen to reboot to recovery with (Volume - ) button and power.
I think the idea is not letting the Stock os boot
Also that error. i have the same problem, the only moment it doesn't appear is when you wipe all data with the "Format Data" option inside "Wipe" menu in twrp.
After you boot to the OS once and go back to recovery it will come again everytime you flash something.
Not sure if its a problem or not, because i've dirty installed some updates and also installed gapps and magisk even with that error.
Im currently in A10 using Havoc and NikGapps.
TWRP 3.2.3-0
Click to expand...
Click to collapse
Yes, I know I have to install twrp again every time I let the stock rom boot, but the only version of twrp working is 3.2.3 and I think that was released before the G6 received official Android 9 update, so that's why I'm not very confident using it. I've tried to enter recovery immediately after I've installed it, so I don't think that's the problem.
I have the same problem on the LG G6 H870. I won't get to TWRP. I tried several versions of TWRP and nothing.
Edit.
This twrp is functional:
https://androidfilehost.com/?w=files&flid=289997
After installation using fastboot, restart directly to twrp using power+vol. down.
Finally i've successfully flashed Skyhawk using TWRP 3.3.1, so thanks everyone for advice!
Still couldn't make official TWRP 3.4.0/3.4.0.1 work.
Update TWRP 3.1 to 3.4 problem
Thelock1 said:
Finally i've successfully flashed Skyhawk using TWRP 3.3.1, so thanks everyone for advice!
Still couldn't make official TWRP 3.4.0/3.4.0.1 work.
Click to expand...
Click to collapse
Hi, I don't know if this goes here, I hope you can help me, I update twrp from version 3.1 to 3.4 and now I can't access twrp, how can I fix it?
Hello again, I answer myself, and if it helps someone else, using adb fastboot with twrp 3.2 Melina solves it and twrp works perfectly again.

Categories

Resources