Related
Purchased this case, just got it today (2 weeks shipping to me).
I am not affiliated with the seller in any way, this is simply me documenting my experience with the case so far.
http://www.ebay.com/itm/IMAK-D802-2...DA_Cases&var=570205273984&hash=item3f2b1f8de1
I was looking for something light, cheap, snug fitting, and stylish, this case definitely fits the bill.
Lets start with the Negatives:
- the case is clear polycarbonate and is VERY prone to scratching in its current state (in my case I plan on giving it a frosted finish anyway so this doesn't really apply to my case)
- the corners of the phone are still partially exposed with this style of case in the event of drops (again I don't plan on dropping the phone )
Now The Pluses:
- Sturdy, the polycarbonate does not feel fragile or brittle at all and has some flex
- It feels a bit grippier in the hand than the stock back does
- the case edges are raised by 0.5 mm when you lay your phone face down so the screen doesn't touch the surface.
- Cheap under $6 gets the job done for me
- Light, feels alot lighter/more agile in the hand compared to the rubber case I had on it before (doesn't feel like I actually have a case on the phone now).
- Very snug fit; there is no way it is coming off the phone, you have to pry it off.
- See pics below (excuse the iphone pics..):
View attachment 2388849 View attachment 2388850 View attachment 2388851 View attachment 2388852 View attachment 2388865 View attachment 2388866 View attachment 2388867 View attachment 2388868
How do you feel this would compare to some of the more expensive cases in the market (incipio dual pro, spigen) in terms of actual drop protection?
Also, what screen protector are you using? Is that one of those tempered glass screens?
Edited. In terms of drop protection vs. incipio dual pro and spigen, the latters would be better protection, but they will also be bulkier, that is the trade off.
I have a rubber case that is more drop resistant than the IMAK case, but the IMAK is is much lighter/less bulky by comparison.
Also, what screen protector are you using? Is that one of those tempered glass screens?
Click to expand...
Click to collapse
That is the stock screen protector that ships with the phone.
sil0 said:
In terms of drop protection vs. incipio dual pro, incipio would be better protection, but it will also be bulkier than this one for sure, that is the trade off, i have a rubber case that is more drop resistant but this one is much lighter/less bulky by comparison.
That is the stock screen protector that ships with the phone.
Please edit your post and delete the quotes please, since you are first poster in the thread, thanks!
Click to expand...
Click to collapse
Edited. I had the quotes in there so you get a notification that you've received a reply.
I wanted to confirm that you really meant to say that the Incipio would have better drop protection than the Spigen and not the other way around (since you later went on to say "but" re bulk), thanks!
Are the exposed rubber portions of the Dual Pro susceptible to major lint/dust attraction? If so, is it easy to clean (I was thinking of getting the white Dual Pro to match a white G2).
Do you think there's enough room on the sides of the case to have a tempered screen protector?
Didn't realize the phone came with a well-fitting screen protector from day 1. That's pretty cool!
I have never used the Spigen or Incipio but I think its fairly safe to say all 3 cases will have enough room for current slim tempered glass screen protectors once companies figure out the curved glass edges which are currently giving screen protector manufacturers a headache.
The stock screen protector is definitely a nice touch in the interim.
rebelx said:
Edited. I had the quotes in there so you get a notification that you've received a reply.
I wanted to confirm that you really meant to say that the Incipio would have better drop protection than the Spigen and not the other way around (since you later went on to say "but" re bulk), thanks!
Are the exposed rubber portions of the Dual Pro susceptible to major lint/dust attraction? If so, is it easy to clean (I was thinking of getting the white Dual Pro to match a white G2).
Do you think there's enough room on the sides of the case to have a tempered screen protector?
Didn't realize the phone came with a well-fitting screen protector from day 1. That's pretty cool!
Click to expand...
Click to collapse
No experience with the DualPro, but they list the material as silicone.
My experience with silicone is it's a grippy material and does a good job attracting dust and having it stick to the surface. Cleaning is generally impossible unless you rinse it through some warm tap water.
I left the stock screen protector on my phone as well.
sil0 said:
I have never used the Spigen or Incipio but I think its fairly safe to say all 3 cases will have enough room for current slim tempered glass screen protectors once companies figure out the curved glass edges which are currently giving screen protector manufacturers a headache.
The stock screen protector is definitely a nice touch in the interim.
Click to expand...
Click to collapse
Definitely. My G2 is going to be coming in after black friday (at this point, there's no point in ordering now at full price) so hopefully the extra few weeks gives manufacturers some extra time to get the fit right.
yyz123 said:
No experience with the DualPro, but they list the material as silicone.
My experience with silicone is it's a grippy material and does a good job attracting dust and having it stick to the surface. Cleaning is generally impossible unless you rinse it through some warm tap water.
I left the stock screen protector on my phone as well.
Click to expand...
Click to collapse
Darn, I literally *just* placed an order for the white case. There was another poster in the forum that said that their DualPro was easy to clean by just wiping the dust/lint away. Now you're making me worry!
I have been asked by @ZEROLEMON_OFFICIAL to start a thread for the purpose of posting reviews of their Ultra Glass Armor 9H tempered glass screen protectors for the HTC M8.
***DO NOT START A SEPARATE THREAD FOR THE PURPOSE OF WRITING YOUR OWN REVIEW. ALL REVIEWS OF THIS PRODUCT SHOULD GO IN THIS THREAD ONLY. ALL OTHERS WILL BE REMOVED BY THE MODERATION TEAM***
My review is as follows:
I received my tempered glass screen protector in the mail the other day. Everything was neatly packaged and included everything to install the screen protector. The wording of the instructions on how to install the screen protector was a bit confusing, but I've used a screen protector before so I knew how to install one. The only real issue I had was getting the protective film off the sticky side of the screen protector itself. The pull tab-style sticker came right off but the film itself remained, so I had to use a fingernail to pick at the edge of the film and then finally remove it. The screen protector went right on and looks great. I've only noticed a couple of issues, those being the screen protector seems to have a bit more glare than the actual screen of the phone, but I didn't find this to be an issue when viewing the phone in various lighting conditions. Also, it does seem to pick up dust fairly quickly. Overall, for the price you'd pay at an online store like Amazon, I don't think you'll find a better value tempered glass screen protector. Pick one up for yourself and see:good:
Amazon currently has them for $8.99.
Zerolemon Ultra Glass Armor 9H Tempered Glass Screen Protector on Amazon
Magnum_Enforcer said:
My review is as follows:
I received my tempered glass screen protector in the mail the other day. Everything was neatly packaged. The wording of the instructions on how to install the screen protector was a bit confusing, but I've used a screen protector before so I knew how to install one. The only real issue I had was getting the protective film off the sticky side of the screen protector itself. The pull tab-style sticker came right off but the film itself remained, so I had to use a fingernail to pick at the edge of the film and then finally remove it. The screen protector went right on and looks great. I've only noticed a couple of issues, those being the screen protector seems to have a bit more glare than the actual screen of the phone, but I didn't find this to be an issue when viewing the phone in various lighting conditions. Also, it does seem to pick up dust fairly quickly. Overall, for the price you'd pay at an online store like Amazon, I don't think you'll find a better value tempered glass screen protector. Pick one up for yourself and see:good:
Amazon currently has them for $8.99.
Zerolemon Ultra Glass Armor 9H Tempered Glass Screen Protector on Amazon
Click to expand...
Click to collapse
Thanks for your feedback. The pull tab-style sticker should be able to stick on the film so the film will be easy to peel off. Maybe you are just unlucky, sorry. Below is the revised version of instruction which will be applied to the new batch.
1.Please wipe off all fingerprints and oil stains from the screen with the included alcohol swab. Wipe the screen with the included microfiber cloth for drying.
2.Place phone on flat surface with screen facing up. Peel the first plastic adhesive off and align the screen protector edge with the phone's edge.
3.Gently place the screen protector on the screen. The screen protector will automatically adhere to the surface of the screen.
4. If there are bubbles between the screen protector and the phone, please use a flat card to gently push out the bubbles to the edge of the phone.
5. Installation complete.
Those instructions are much better:good:
OMG INCREDIBLE!! Of all the shields I have had, this is surely my last from anyone. I am sticking to Zerolemon from now on. My other shields was fingerprint magnets, not this one. Easy to put on, and thinner than any other shield. Here is my 5 Star review from Amazon:
""I got the shield today, it was a snap to install. Thinner than my Chinese shield, and surprisingly almost fingerprint proof. The one thing I hated about my last shield was it attracted all my fingerprints. I always was cleaning it. But this one doesn't seem to even know my fingers even touched it. I can see the prints after heavy use, but so easy to clean, and barely visible, it is remarkable. This has got to be the best shield out there. And I have had one on all my phones. But now, this is probably going to be the only one I will have in the future. It's like touching the glass without any shield. Only con is that it seems to attract dust. But given that it is so invisible to the sight and touch a little POOF and no dust at all, I think it is static, because it is new, and will soon wear off. But if you need a shield, heck, YOU DO NEED A SHIELD!! This is the one to buy...""
This has attracted my attention. It is the best one I have ever had on any of my phones. (Now if you can make those camera lens covers from this material, I would be extremely happy) :laugh:
I received mine on Saturday. Beautiful packaging. The instructions where a bit on the small side, but its pretty self explanatory. The application went well enough, but keep in mind that this glass seems to be cut exactly the same size as the glass on the M8. So when you start to apply it make sure it starts exactly where it does on the phone. If you are even a little pulled away from the start of the glass on the opposite side of the glass it wont stick down because it will be slightly on the speaker grill. After getting that straightened out it looks incredible. For the price you cant go wrong.
Anyone who knows how to take care of a phone knows you need a screen protector.
Scratch proof glass just isn't after enough time has passed. But there's a reason manufacturers stick with glass for screens. It's tactile, your finger glides over it with silky precision. It gives the phone a solid and dependable touch to it. A solid reassurance. Most importantly, glass gives the best transmission of light from the underlying pixels so it makes the display look vibrant.
Then you have to slap some cheap plastic on top of it, This was far easy to apply to the phone. The glass and the phone join together like magic, after you have aliened it over the phone the two bond together, the Best part is there isn't a bubble beneath it, which I can't stand in plastic screens.
This is a revolutionary product. I love it. There are only a few cons to having this is an ever so slight increase in thickness in your phone. Plastic screen protectors are negligibly thick but glass has to be a bit thicker to be effective. Personally, I like the added thickness, modern phones are, to me, increasingly flimsy feeling. This gives it a bit more substance (My case still fits without issues as-well). I have also found 2 out of 4 corners are a little sharp and could of been slightly more rounded.
Overall this is one amazing screen protector and I look forward to showing it off on my phone.
How many taken part in this thread actually paid for theirs? Given that ZeroLemon were offering free units in return for reviews. It's hard to determine genuine positives from this thread. Has anyone compared this product to the others such as Nillkin (arguably best tempered screen protector), Mime, Zagg etc.
Sent from my HTC One_M8 using Tapatalk
Chris_c81 said:
How many taken part in this thread actually paid for theirs? Given that ZeroLemon were offering free units in return for reviews. It's hard to determine genuine positives from this thread. Has anyone compared this product to the others such as Nillkin (arguably best tempered screen protector), Mime, Zagg etc.
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
I have had the Nilkin on my M8, saved the screen when it fell on the floor when I was in the doctors office. But it was thicker, and always showed my fingerprints. This screen (Even though I didn't pay for it) is the best I have had. I have had tempered glass on my screens for a couple years, almost always the cheap ones from China that takes 6+ weeks to get here. This one is local and cost is similar, would I have bought it? I don't normally shop Amazon, so unless it was on eBay I probably would not, unless I seen it on someones device, or at least heard good news about it. I didn't even know that the glass resist fingerprints. Would I but another? Yep... I have already showed it to a friend, and she is going to get her M8 this weekend and order this shield. Because it is a lot better than the one on her M7. So even though you might think that the review is biased because it was free, it isn't. It is a good shield and not bad on the price either.... :good:
I got mine in the mail today.
1. It is awesome. It covers the entire glass portion of the front of the phone. Not just the active LCD area.
2. It is extremely smooth. This makes it feel as if it is not there.
3. It's oleophobic coating is superb. Haven't seen a single finger print.
4. It is extremely clear, I cannot tell it is there.
5. I have it paired with the Otter box symmetry case and feel as if my phone has the ultimate protection.
6. The only draw back was during the installation I kept getting a raised corner. This was because Tue glass is cut to very small tolerances and matches the M8's screen perfectly. I had to slow down and focus on what I was doing.
All in all I am pretty happy with it and will be buying a second one to keep as a backup. I see this protector lasting the life of phone and keeping the resale value in since the screen will be in perfect condition whenever it is peeled off.
Chris_c81 said:
How many taken part in this thread actually paid for theirs? Given that ZeroLemon were offering free units in return for reviews. It's hard to determine genuine positives from this thread. Has anyone compared this product to the others such as Nillkin (arguably best tempered screen protector), Mime, Zagg etc.
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
I understand your concern. We are sending free samples in exchange for an honest review. We do not send samples to everyone, only legit users. You guys are welcome to compare our screen protector with other brands.
I have received my tempered glass protector from Zerolemon. Before I start I'll say that it was sent for review on condition that I review it. They told me to make an honest review, and never set any guidelines which leaves me to do and say whatever I'd like. I am in no way obliged to give a good review as they have nothing on me and have not told me otherwise.
The protector arrived in excellent, eco-friendly packaging that was simplistic yet effective in explaining what the product is and how to install it. Right away I could tell that the glass protector was of good quality and not simply a Chinese knock-off. I have used dozens of protectors including Spigen's $40.00 Nano slim, and this is comparable, if not better given the price.
The protector installed without a hassle, and aligned IDENTICALLY with my screen. The cut-out is perfect unlike other protectors, and offers maximum coverage with no exposed areas of the screen.
Included in the package are an anti-bacterial wipe and cloth to make sure you screen is very clean before installation. Once done, you take off the back film from the glass protector and simply let it adhere to the screen of your M8.
Again, this review was is in no way dictated by ZeroLemon, and I could of written anything I wanted. In fact, I already had another tempered glass protector installed so I didn't even need a 'free sample'.
I give this product a 10/10 simply because it's of top quality, and for the price, you cannot beat it.
I have recently received an ultra glass 9h tempered glass screen protector from zerolemon about a week ago. Upon first glance the packaging is well put together with the screen protector placed securely inside. The packaging comes with the tempered glass protector, a microfiber cloth, and an alcohol wipe to clean the screen off. The directions can be kind of confusing if you have never applied a screen protector or a glass screen protector before as they seem to be worded weird. If you apply to protector properly it looks extremely nice and feels as if there were no protector on it. The one thing I do not like about this glass protector is that it is a little on the thick side. With a case on the phone thou you don’t really notice how thick it is, but I do not use a case so I can feel the thickness of the protector. Without the case I need to be more careful when I put it and pull it out of my pocket to make sure that it doesn’t peel off or catch on the inside of my pocket. I have also noticed that this protector can have a little bit of glare in direct sunlight or light unlike the screen with no protector on it but it’s not that bad. All in all this a fantastic screen protector and for $8.99 you can’t really beat the price for any other screen protector, especially a glass protector. I would recommend this protector to anyone who wants to get a glass protector and give it shot!
What is the thickness of the protector?
suparnemo said:
What is the thickness of the protector?
Click to expand...
Click to collapse
0.3 I believe.
Sent from my HTC One_M8 using Tapatalk
Real World Use - PASS!!!
Ok, i was normally running naked since i've had my m8 and got a .10 cent chine film screen protector for a while but it fell off on one of my trips to the beach. I contacted zerolemon to inquire upon the free product.
Fast forward a week and i got it 3 days ago. Putting it on was a snap, its very precise with its cuts. My crappy chinese case was very close to not fitting but it did with a little adjusting.
Now yesterday at santa cruz my girlfriend put our phones on trunk lid area while we grabbed our stuff. She grabbed her phone and we started closing the lid and foolishly we slammed the trunk 2 times. i eventually notices my phone and immediately freaked out, but fortunately the only cracks was 3 in diff areas, and my actual screen was unharmed. If it wasn't for this product i would have a cracked phone right now and im still rocking my slightly cracked glass armor until i order a new one soon.
I'm giving this screen 10/10 across everything just for saving my ass. I highly reccomend this screen
Now that is a test I don't want to try. LoL
Why are there over a dozen phony 5 Star reviews posted on Amazon?
http://www.amazon.com/Lifetime-Warr...er=2&showViewpoints=0&sortBy=byRankDescending
just lou said:
Why are there over a dozen phony 5 Star reviews posted on Amazon?
http://www.amazon.com/Lifetime-Warr...er=2&showViewpoints=0&sortBy=byRankDescending
Click to expand...
Click to collapse
Just place cards, not really phony. If you wanted to test it out free, then you need to review it, good or bad. But so we was ask to post a temp review on there till we get the screen and check it out. Once it is checked out, the tester can go back and edit his review to show what he/she feels about it.
Oditius said:
Just place cards, not really phony. If you wanted to test it out free, then you need to review it, good or bad. But so we was ask to post a temp review on there till we get the screen and check it out. Once it is checked out, the tester can go back and edit his review to show what he/she feels about it.
Click to expand...
Click to collapse
Unbelievable. A "temp" review? Why not let people review the item after they actually use it, instead of telling people to leave 5 star reviews for an item they don't even have yet?
It seems that all currently available on AliExpress (at least) tempered glass protection are flawed, because of:
1- Protectors that covers the body in full, and has some black areas: has actually glue only on the black non-transparent zones, but nothing on display area it self (so only display ages, upper and lower parts has glue), this makes it rubbish, because it will not stick well to the screen, one or two gaming sessions and it will end in recycle bin.
2- Fully transparent one, with full screen coverage: because 1+5 has 2.5D screen, those covers will not stick well on phone edges since tempered glass is rigid, this maybe can be used only with covers that overlap edges of the screen also.
3-Fully transparent one that don't cover all of the screen: those usually stick well, but only if they left about 5mm on each edge uncovered! I believe it is clear that such a gap ruins the protective purpose of the tempered glass, aside the ugly look due to gaps. (Again, having an edge overlapping cover could make it look better)
So it seems the only practical option for now is to use usual non glass protection unfortunately.
If I missed something or you have some suggestions please let me know..Some manufacturers claims that there protector is 4D, what means that it should solve all above issues, i didn't try those yet, anybody tested them?
I am regretting removing original 1+5 protection
As I bought and still use an Orzly tempered glass protector I concur with your analysis at this time. When I first applied the Orzly is was perfect without the issues some experienced but after 3+ weeks the sides must have lifted slightly due to my bumper case and dust particles got underneath next to the left/right buttons. Since then I've been religiously looking for an alternate that passes the case test but none so far have come to light.
I like the feel of the tempered glass so much that I've resisting going back to the film/plastic alternatives which I had always used in the past. I'm even considering going naked on the screen, relying on Gorilla Glass 5, but continue with a bumper case. Or the reverse, by using an Orzly but with no bumper case as I already have a dBrand skin applied. None of those options seem all that appealing. The one protector that seems to work with a 2.5D screen is the Galaxy 8's Whitestone Dome Glass but it's a crazy expensive $41USD and difficult to apply. I'm not sure even if a OnePlus 5 version was available I'd spend that much money.
I haven't had any luck with any tempered glass., due to point 2 which has been raised:
2- Fully transparent one, with full screen coverage: because 1+5 has 2.5D screen, those covers will not stick well on phone edges since tempered glass is rigid, this maybe can be used only with covers that overlap edges of the screen also.
Click to expand...
Click to collapse
After reading all of the reviews I decided just to leave the plastic one on until someone gets their act together and offers a proper tgsp for the OP5
Sent from my OnePlus5 using XDA Labs
Agreed with OP and all of above. I had and still have the Orzly TG protector on, but dust underneath. I want to go back to the usual plastic ones, but don't know which one covers as well/much as the original one that came with the phone. Any recommendations?
Sent from my ONEPLUS A5000 using Tapatalk
Im still waiting for my Nilkin glass protector to arrive (it's almost been a month, sigh)
If this one has the same issue as the ones I've tried before it (lack of adhesive around the edges), I'm going to try and go back to using plastic screen protectors.
I don't want to use my device without one, but I also hate how these glass protectors don't fully adhere to the screen around the sides (including top and bottom)
Biuzko tempered glass screen protector from Amazon had been working perfectly for me for many weeks.
Megaflop666 said:
Biuzko tempered glass screen protector from Amazon had been working perfectly for me for many weeks.
Click to expand...
Click to collapse
Can anybody confirm this?
on yt you have a channel big ubox and there one guy test a lot of tempered glasses and cover for OP5 also the Biuzko one.
graja84 said:
on yt you have a channel big ubox and there one guy test a lot of tempered glasses and cover for OP5 also the Biuzko one.
Click to expand...
Click to collapse
The YouTube channel you mention is also my favorite choice for screen protector info for the Oneplus 5. He always tests the protectors with various cases. His branding of the channel can get annoying but his market coverage is excellent and vast. With the plethora of tempered screen protectors its your choice for an accompanying case that often makes a big difference in your satisfaction. Here is the Big unBox - Biuzko review.
One thing I noticed is when the Big unBox applied the Official OnePlus 5 tgsp video it had lots of bubbles on the edges that he said couldn't be removed while I watched XDA's TK review and his application looked perfect with TK giving it a thumbs up. In the comment section of that review TK said all was well even after a month of usage. I was surprised as the Official tgsp has garnered horrible reviews and comments in the XDA Oneplus 5 accessories section. The most consistent criticism of the Official tgsp is that it cuts off a tiny fraction of the screen. In fact, so far my research indicates all of the "Full Adhesive", "Full coverage" tgsp cut off part of the screen. Personally I think the reason they have a black line on the edges is to hide inevitable bubbles due to the curved edge. The thicker the tempered glass the wider the side black stripes (e.g. Orzly versus Official).
Here is the criteria I'm using in selecting a replacement for my Orzly tgsp and cheap bumper case. Note that I've already installed a dBrand skin so that skews my criteria somewhat.
Tempered Glass screen protector:
- Must have full adhesive (not just top/bottom and side adhesion) and full coverage
- Would prefer, but am a tiny bit flexible on, part of the screen being cut off (limit is that not one pixel of the notification bar's clock is trimmed)
- Must have an oleophobic coating
Case:
- Needs to be as non intrusive as possible adding grip but not greatly ruining the sleekness of the phone
- Uses a minimalist design and/or clear materials so as not to obstruct viewing of the dBrand skin I've installed
- With the case on the buttons (power and volume rocker) must not be difficult to press
So far my research has me leaning towards the Official OnePlus 5 or Biuzko tgsp with a Rhinoshield Crashguard case. My one issue is that the Rhinoshield reviews always mention how difficult the volume rocker buttons are to press. Here is the video that has me leaning in that direction as is seems to best address my criteria
OnePlus 5 best case/protector setup
I'll being doing more reading and searching today hoping to find the unicorn of tgsp/case combinations. The dust under my Orzly is driving me mad but the feel and responsiveness of its surface has me rejecting a film/plastic protector alternative.
I'm using the Biuzko as well with the Tudia MERGE case no problems.
The trick is to first put OP5 in the case, THEN place the screen protector on. It fits perfectly, and you can't mess up the alignment since it falls right in. Then I just try to put pressure on the sticky parts for a few minutes.
I've had no problems for 3 weeks now.
I installed mine the same way, but I'm using the op5 carbon fiber case.
Sent from my ONEPLUS A5000 using Tapatalk
The original plastic cover was just perfect, is there is any possibility to find an équivalence ?
There's only tempered glasses on internet
akhage said:
The original plastic cover was just perfect, is there is any possibility to find an équivalence ?
There's only tempered glasses on internet
Click to expand...
Click to collapse
Hello,
I recommend you the plastic screen protectors from GadgetShieldz. I made a review about it on another post on xda but to summarize, it's a bit difficult to apply but then it's great. The screen looks good and it's cheap ^^ highly recommend.
FYI, I was struggling with TGSP for the OP5 and I just gave up. There is no good alternative atm.
TMSxXDA said:
It seems that all currently available on AliExpress (at least) tempered glass protection are flawed, because of:
1- Protectors that covers the body in full, and has some black areas: has actually glue only on the black non-transparent zones, but nothing on display area it self (so only display ages, upper and lower parts has glue), this makes it rubbish, because it will not stick well to the screen, one or two gaming sessions and it will end in recycle bin.
2- Fully transparent one, with full screen coverage: because 1+5 has 2.5D screen, those covers will not stick well on phone edges since tempered glass is rigid, this maybe can be used only with covers that overlap edges of the screen also.
3-Fully transparent one that don't cover all of the screen: those usually stick well, but only if they left about 5mm on each edge uncovered! I believe it is clear that such a gap ruins the protective purpose of the tempered glass, aside the ugly look due to gaps. (Again, having an edge overlapping cover could make it look better)
So it seems the only practical option for now is to use usual non glass protection unfortunately.
If I missed something or you have some suggestions please let me know..Some manufacturers claims that there protector is 4D, what means that it should solve all above issues, i didn't try those yet, anybody tested them?
I am regretting removing original 1+5 protection
Click to expand...
Click to collapse
Thanks for this, I recently just applied it and noticed all the issues you raised.
akhage said:
The original plastic cover was just perfect, is there is any possibility to find an équivalence ?
There's only tempered glasses on internet
Click to expand...
Click to collapse
Skinomi makes a wet application protector in both clear and matte. I posted pics of the matte version here. Since that post, I've experienced no scratches or orange peel effect. It's also great for no fingerprints.
You can always get the Nillkin H+ Pro, but only if you are using a spigen case or otterbox. Right now I am using the Spigen Rugged Armor with Nillkin H+ Pro and the gap between the glass and the case is around 1 mm (i would say 1.5 mm if I have to be more accurate). The Otterbox case is even better but I find it too bulky, tried it once for an hour and I did not enjoy it, but some of you may like it.
Few words about the Nillkin H+ Pro.
I know there are few variants of the Nillkin glass and I have tried all of them in the past. In my opinion the best glass is exactly the H+ Pro even tho it is a 1 dollar more expensive. The glass has zero rainbow effect or halo effect, it is 99 to 100% clear. It has amazing orleophobic coating. My Honor 8 has the same glass for 6 months now and it is flawless. I am going to change my nillkin glass with the official 3D tempered glass but only because I received the rhinoshield bumper. Otherwise I would not change my nillkin. You are going to get used to the small gap in a week or so.
Don't leave the phone without a glass.
I just applied mine, best screen protector I ever had, pure quality. Quote me on that
I love the official OnePlus screen protector, it's premium & looks good. Who ever made this thread is straight up wrong. The one he recommended is no Bueno, the glass part doesn't have enhesive. Look I am a OnePlus 5 conisuer, the screen protector is fantastic ?
I have siegen case. Can I buy the original screen protector from oneplus store with no problems? Or can I suggest me something with dust proof and oil proof ?
Received my OTAO Tempered Glass for my Note 8 Today. The Product arrived quickly and was packaged well.
The Package Included : (1) Installation Tray, (1) Glass Protector, (1) Cleaning Cloth, (1) Alcohol Wipe, (1) Sticker for dust/lint removal,
(1) Instruction Card W/Photos, (1) Thank You Card with Contact info for OTAO.
You can purchase them from here : https://www.amazon.com/Tempered-Pro...=1517931940&sr=8-3&keywords=otao+glass+note+8
The un-boxing was fun, was able to lay out everything and see what all came with the product, packaging felt premium and was well tailored to a Note 8 customer. The process to get the tray over device and screen protector on was slightly awkward and honestly if you have a steady hand you could install it without the tray IMO. I used the tray and the protector was installed perfectly center and square so at least there was 0 risk in getting it crooked or anything.
I was really worried about going to full glass protector on a infinity type screen. The curved glass has been hell to cover with anything but liquid glass (that provided 0 real protection) and not interfere with touch / operation.
The screen protector has glue 360* around the glass so there is not any movement or feeling of it being loose or poorly seated. I read other reviews where the glass had become loose or cracked and I can attest that this should NOT be the case. The only way its breaking is a drop or accident that resulted in a good bit of force onto the screen/glass. This protector IS case friendly as well, I tried it with my OtterBox as well as my UAG and neither case lifted or pushed the screen protector in any way!
Overall im really glad I tried the OTAO branded protector, as all the others do NOT have a 360* seal or the ability to work with many cases on the market, and OTAO has both and a really good price!
Check out the photos i took so you can see what to expect! The case in the photos is the UAG Clear Smoked Case btw!
Pros:
Actual Tempered Glass @ a Fair Price ( Under 15$ Shipped )
Has adhesive around the entire glass ( 360 sealed )
Touch response was unaffected / no gaps or air
Cons:
Tray is a little awkward to use, I would say try to do it without if you feel comfortable.
Adhesive around edges seems to be grabbing some lint / hair over time, kinda annoying
Screen has "Dot Matrix" and is slightly visible and certain angles.
Photos
Photos
I had one like this, another brand, it broke easy. So my question is, did you break it yet?
Mine popped off in 3 days
onlyatbenco said:
I had one like this, another brand, it broke easy. So my question is, did you break it yet?
Click to expand...
Click to collapse
I did not break it, i had it on my device for 30 days, it was really a decent glass protector, but like me2151 said i did notice the adhesive wasnt nearly as strong as i would have liked.
Otherwise it was a nice all glass protector.
I did not like i could see the dot matrix, and the installer tray was garbage.
Otherwise at the cheaper price compared to the white dome, and seeing people complain about it at 60$ + , its worth the investment for a cheaper one that may last 1/4 of the time but be easily replaced and nearly 1/6 the cost.
I'm on my second one. Not because it broke, but because it popped off when I dropped my note and I got dust beneath. Finally changed it yesterday after weeks with the dust. I know I prolly have micro scratches. I really like this one. But, oh well...
Interesting thoughts.
I am getting a new Note 8 tomorrow and this is in my shopping cart. I have been wondering about this as I have heard traditional screen protectors don't work well on the rounded glass.
dtaylorr said:
Interesting thoughts.
I am getting a new Note 8 tomorrow and this is in my shopping cart. I have been wondering about this as I have heard traditional screen protectors don't work well on the rounded glass.
Click to expand...
Click to collapse
So how did you like the OTAO screen protector?
Sent from my Galaxy Note 8 using XDA Labs
I am using the screen protector that came with the phone but I am worried that it might not be that good to rely on.
I am not taking about dropping the phone or something. All am I caring about is scratches from the pen or stuff in my pocket. Can this screen protector help against these or it is useless?
The reason I kept it, because it fit so well and it does not affect the screen quality.
Obviously experience may vary quite a bit due to different conditions. For me so far the stock protector works quite well and protects the screen from scratches.
But as I like the "Glass feeling" a bit more I'll fit a tempered glass protector sometime in the future....
Agree. I will do the same. It is just not easy to find a glass protector that actually fits
Khalid Madkour said:
Agree. I will do the same. It is just not easy to find a glass protector that actually fits
Click to expand...
Click to collapse
Well, both Amfilm and Whitestone have UV-based tempered glass protectors that fit really good, but do you want to spend the money for those?
They're not like $10 for 3 pieces or something
MasterThiefGarrett said:
Well, both Amfilm and Whitestone have UV-based tempered glass protectors that fit really good, but do you want to spend the money for those?
They're not like $10 for 3 pieces or something
Click to expand...
Click to collapse
Spending 70~100 USD to protect 1200$ is worth it but the problem these kind of screen protectors can not be found in Egypt I think so until I find a way to get them without paying much taxes and fees I will stick with the default S.protector
I remember Samsung saying that a glass screen cover would interfere with the fingerprint scanner. I'm curious as to whether or not that's actually the case...
I had problems with the finger reader. He caught the fourth, fifth time. (I added the same one a couple of times and it didn't help.) Today I took off the factory foil and magic. The reader catches off the shot every time!
NippleSauce said:
I remember Samsung saying that a glass screen cover would interfere with the fingerprint scanner. I'm curious as to whether or not that's actually the case...
Click to expand...
Click to collapse
I tried a cheap UV-based tempered glass (10 euros) and on my Note 10 it works flawless every time.
And since the S21 series has a much bigger sensor I expect it to work fine as well, I know Whitestone Dome works fine, AND the AmFilm one too.
I used Note 8 for 3 years without screen protector and had maybe 1 micro scratch that was only visible when screen off. Now still using S21U with pre installed screen protector but the feeling of it is not so good, very rubbery especially if fingers are wet. Debetaing to take it of because I have some problems with fingerprint reader too, it's not bad but sometimes it's not detecting the finger.
Make sure your case has a lip guard. That has always worked for me.
I really liked the factory fitted screen protector.
It is more than adequate to protect the screen from scratches from everyday use. Unfortunately the corner peeled off after getting caught on some fabric on the couch so I had to replace it.
I decided against a tempered glass protector for the following reasons:
1. Regular tempered glass SP interfere with the ultrasonic fingerprint reader. Go to amazon and search for s21U TP screen protectors and you'll see what i mean.
2. There are some TG screen protectors that use UV light hardened resins to stick to screen. These are supposed to be fingerprint reader friendly but the good ones like Whitestone Dome are very expensive (for a disposable item) and you have to get a perfect installation, with the resin being a potential hazard if it seeps into the phone.
The cheap ones on the other hand are usually not very good and have a thinned out layer of glass overlying the fingerprint reader that is really irritating to look at.
3. I'm not sure what that UV hardening adhesive does to the oleophobic coating on the screen over a long time.
4. TG screen protectors do not have an anti-reflective coating like the phone screen. So once you apply it, the surface becomes shiny and reflective like glossy screens. This doesnt happen with the softer TPU protectors. Maybe someone who has recently applied a TG SP can post his experience here?
3. TG also adds thickness to the screen as compared to TPU screen protectors, and this is a pretty chunky phone already.
I moved away from tempered glass protectors about 3 years ago after trying a bunch of them and have been using TPU (liquid skin type) SP since then. They are cheap, easy to install, usually come in multi-packs so you can swap them out when it gets dirty or peels off or scratches etc, without breaking the bank or feeling sorry that you have to throw away a $30 - $50 tempered glass protector that you applied with utmost care. The newer materials are also very nice to touch, virtually indistinguishable from the underlying glass.
Having said all this, I have friends that swear by tempered glass protectors and are willing to pay anything to have the feel of glass under their fingers. There's no right or wrong answer here, just what works for you.
enigmaamit said:
I really liked the factory fitted screen protector.
It is more than adequate to protect the screen from scratches from everyday use. Unfortunately the corner peeled off after getting caught on some fabric on the couch so I had to replace it.
I decided against a tempered glass protector for the following reasons:
1. Regular tempered glass SP interfere with the ultrasonic fingerprint reader. Go to amazon and search for s21U TP screen protectors and you'll see what i mean.
2. There are some TG screen protectors that use UV light hardened resins to stick to screen. These are supposed to be fingerprint reader friendly but the good ones like Whitestone Dome are very expensive (for a disposable item) and you have to get a perfect installation, with the resin being a potential hazard if it seeps into the phone.
The cheap ones on the other hand are usually not very good and have a thinned out layer of glass overlying the fingerprint reader that is really irritating to look at.
3. I'm not sure what that UV hardening adhesive does to the oleophobic coating on the screen over a long time.
4. TG screen protectors do not have an anti-reflective coating like the phone screen. So once you apply it, the surface becomes shiny and reflective like glossy screens. This doesnt happen with the softer TPU protectors. Maybe someone who has recently applied a TG SP can post his experience here?
3. TG also adds thickness to the screen as compared to TPU screen protectors, and this is a pretty chunky phone already.
I moved away from tempered glass protectors about 3 years ago after trying a bunch of them and have been using TPU (liquid skin type) SP since then. They are cheap, easy to install, usually come in multi-packs so you can swap them out when it gets dirty or peels off or scratches etc, without breaking the bank or feeling sorry that you have to throw away a $30 - $50 tempered glass protector that you applied with utmost care. The newer materials are also very nice to touch, virtually indistinguishable from the underlying glass.
Having said all this, I have friends that swear by tempered glass protectors and are willing to pay anything to have the feel of glass under their fingers. There's no right or wrong answer here, just what works for you.
Click to expand...
Click to collapse
A case with enough lip protection is good enough.
Thank you for sharing you experience. I decided to stay with the factory screen protector. It really love it as it fits the screen so well and is clear as if there was no screen protector.
enigmaamit said:
I really liked the factory fitted screen protector.
It is more than adequate to protect the screen from scratches from everyday use. Unfortunately the corner peeled off after getting caught on some fabric on the couch so I had to replace it.
I decided against a tempered glass protector for the following reasons:
1. Regular tempered glass SP interfere with the ultrasonic fingerprint reader. Go to amazon and search for s21U TP screen protectors and you'll see what i mean.
2. There are some TG screen protectors that use UV light hardened resins to stick to screen. These are supposed to be fingerprint reader friendly but the good ones like Whitestone Dome are very expensive (for a disposable item) and you have to get a perfect installation, with the resin being a potential hazard if it seeps into the phone.
The cheap ones on the other hand are usually not very good and have a thinned out layer of glass overlying the fingerprint reader that is really irritating to look at.
3. I'm not sure what that UV hardening adhesive does to the oleophobic coating on the screen over a long time.
4. TG screen protectors do not have an anti-reflective coating like the phone screen. So once you apply it, the surface becomes shiny and reflective like glossy screens. This doesnt happen with the softer TPU protectors. Maybe someone who has recently applied a TG SP can post his experience here?
3. TG also adds thickness to the screen as compared to TPU screen protectors, and this is a pretty chunky phone already.
I moved away from tempered glass protectors about 3 years ago after trying a bunch of them and have been using TPU (liquid skin type) SP since then. They are cheap, easy to install, usually come in multi-packs so you can swap them out when it gets dirty or peels off or scratches etc, without breaking the bank or feeling sorry that you have to throw away a $30 - $50 tempered glass protector that you applied with utmost care. The newer materials are also very nice to touch, virtually indistinguishable from the underlying glass.
Having said all this, I have friends that swear by tempered glass protectors and are willing to pay anything to have the feel of glass under their fingers. There's no right or wrong answer here, just what works for you.
Click to expand...
Click to collapse
nixnixnixnix4 said:
A case with enough lip protection is good enough.
Click to expand...
Click to collapse
Yes. For most purposes, I agree with you that it's enough. I used to think so too... Never used a screen protector on any of my phones. Tried the tempered glass one on my last phone but felt it was too thick and reflective, so there is away and went with a naked screen. The experience was amazing, interfacing with the screen without any barriers. At least until I got two mysterious scratches on my OnePlus 6 screen, about 2 months apart, one after the other. Never dropped the phone, didn't put it face down, just used it normally. Must've been a grain of sand in my pocket... I'm still not sure to this day what caused the scratches...
I was using a spigen case without a screen protector then. Had to live with those scratches for 2 years. It was heartbreaking to see them everytime... See attached pics.
Since that experience, I vowed never to go with the screen naked again. Maybe I was just unlucky. But the fact that it happened twice is something I cannot ignore, and cannot risk on this new phone. It's too beautiful and too expensive to gamble with, at least based on my personal experience.
Second day I had my Note 10+ it faceplanted on a rough piece of 1/8" thick aluminum angle from pocket height. The metal hit the curve portion of the screen. Oh Yeah... isn't that special?
The case soaked up some of the impact but the factory screen protect was hit and savaged.
It protected the screen, zero damage. gulp.
Been using wet apply Gorilla IQ Sheild after trying a bunch of products including Whitestone.
After 9 months it's still on and while it's due to be replaced it's held up amazing well for $5 a pop.
Unlike the other junk, it's easy to apply and line up properly
I use the Zizo Bolt case to provide to majority of the protection. Raised screen guards on all sides are needed as I learned earlier
After 1.5 years, zero damage.
enigmaamit said:
Must've been a grain of sand in my pocket... I'm still not sure to this day what caused the scratches...
I was using a spigen case without a screen protector then. Had to live with those scratches for 2 years. It was heartbreaking to see them everytime... See attached pics.
Since that experience, I vowed never to go with the screen naked again. Maybe I was just unlucky. But the fact that it happened twice is something I cannot ignore, and cannot risk on this new phone. It's too beautiful and too expensive to gamble with, at least based on my personal experience.
Click to expand...
Click to collapse
Sand will do it every time. I tried the same experiment over 2 years ago with the same results. I always use a good case and screen protector because permanent scratches pi$$ me off.
Clarification: Case with a lip everywhere and a regular TPU screen protector is great for the majority of use-cases out there. And, it is the cheapest option.
nixnixnixnix4 said:
Clarification: Case with a lip everywhere and a regular TPU screen protector is great for the majority of use-cases out there. And, it is the cheapest option.
Click to expand...
Click to collapse
And very effective when using a good case.
BDU upper pant leg cargo pockets are great for smartphones...just make sure to keep the rear facing button, buttoned or your will lose it