Database Develop

How to install resurrection remix gsi in moto g6

Hey guys. Any one help me here to properly install the gsi for moto g6. I don't want to mess it up.

androidtab2 said:
Hey guys. Any one help me here to properly install the gsi for moto g6. I don't want to mess it up.
Click to expand...
Click to collapse
https://www.xda-developers.com/flas...BRAB&usg=AOvVaw21lcTNgfGORpOgwJ8G7W6U&ampcf=1

HueyT said:
https://www.xda-developers.com/flas...BRAB&usg=AOvVaw21lcTNgfGORpOgwJ8G7W6U&ampcf=1
Click to expand...
Click to collapse
Thanks. will this cause any problems?

androidtab2 said:
Thanks. will this cause any problems?
Click to expand...
Click to collapse
99% function but 1% not. Stock is best but if you're bored, back up with TWRP and try GSI

descendant rom works great... No issues on my side... all the gestures that comes with the rom made me forget about Moto actions..not to long i Installed "Dolby" it made me forget about going back to stock... Battery wise is almost like stock, the first day flashing the rom was ok, after a week of using it's pretty good...

jglm4u said:
descendant rom works great... No issues on my side... all the gestures that comes with the rom made me forget about Moto actions..not to long i Installed "Dolby" it made me forget about going back to stock... Battery wise is almost like stock, the first day flashing the rom was ok, after a week of using it's pretty good...
Click to expand...
Click to collapse
Please tell me which image you have taken and which gapps you have installed, thanx

​
mcc2005 said:
Please tell me which image you have taken and which gapps you have installed, thanx
Click to expand...
Click to collapse
http://bit.ly/TwoDotZero_arm_aonly
Must be on Oreo base
Open gapps Pico
Magisk 18.1 for root

HueyT said:
​
http://bit.ly/TwoDotZero_arm_aonly
Must be on Oreo base
Open gapps Pico
Magisk 18.1 for root
Click to expand...
Click to collapse
Thank You, I will test it soon. Actually, I am on Stock PIE so I have to go Back to Oreo...
I have been tested, but I get an error while open gapps installed in twrp 'error 64:... (in red) so I am back on Stock... Thanks again.

mcc2005 said:
Thank You, I will test it soon. Actually, I am on Stock PIE so I have to go Back to Oreo...
I have been tested, but I get an error while open gapps installed in twrp 'error 64:... (in red) so I am back on Stock... Thanks again.
Click to expand...
Click to collapse
Unofficial TWRP works for Gapps. Official TWRP doesn't. It's been broken for 6 months

Currently on Moto g6 stock Android 9.0. Is it not possible to flash after rooting on pie ? Also is the ROM daily driver material ? Does VOLTE work also ?

underwater69 said:
Currently on Moto g6 stock Android 9.0. Is it not possible to flash after rooting on pie ? Also is the ROM daily driver material ? Does VOLTE work also ?
Click to expand...
Click to collapse
Most GSI requires Oreo base. Since u have PIE, you're limited to phh AOSP v108, Octopus latest, AEX official, Descendant 1.5 or 2.1 made by the Real John Galt avail. on Telegram for G6 (2.0 needs Oreo). VOLTE generally doesn't work on GSI--just 4G. If u need VOLTE, stay on stock Oreo or PIE. RR7 disallows SD card (int/ext) access but works on PIE base

HueyT said:
Most GSI requires Oreo base. Since u have PIE, you're limited to phh AOSP v108, Octopus latest, AEX official, Descendant 1.5 or 2.1 made by the Real John Galt avail. on Telegram for G6 (2.0 needs Oreo). VOLTE generally doesn't work on GSI--just 4G. If u need VOLTE, stay on stock Oreo or PIE. RR7 disallows SD card (int/ext) access but works on PIE base
Click to expand...
Click to collapse
HueyT. Have tried just about every possible way of installing RR on Moto G6. The last attempt was to completely wipe phone(format, and all directories deleted.). Flashed AOSP 9 PHH treble. It booted properly. Completed "basic setup" then after brought to home screen, powered down. Rebooted into FastBoot. Dirty flashed RR 9 from official download site, and it never passes boot screen. Have left the device for over 30 minutes. Any help would be appreciated!

PhoneSlayer said:
HueyT. Have tried just about every possible way of installing RR on Moto G6. The last attempt was to completely wipe phone(format, and all directories deleted.). Flashed AOSP 9 PHH treble. It booted properly. Completed "basic setup" then after brought to home screen, powered down. Rebooted into FastBoot. Dirty flashed RR 9 from official download site, and it never passes boot screen. Have left the device for over 30 minutes. Any help would be appreciated!
Click to expand...
Click to collapse
RR7 has broken SD card (int/ext) access so can't download anything or any apps or take any photos. Thus, get Oreo vendors and flash RR6.1 and be done with it

underwater69 said:
Currently on Moto g6 stock Android 9.0. Is it not possible to flash after rooting on pie ? Also is the ROM daily driver material ? Does VOLTE work also ?
Click to expand...
Click to collapse
There are several GSI's flashable off of PIE vendors: pHH AOSP v111, Descendant AOSP v2.1 (John Galt has customized it to G6 on our Telegram group with Gapps built-in, but GSI vanilla version listed here will work also), AEX official 6.1, Octopus 11/18, PixelExperience 8/2018 version, LOS16, DotOS and Syberia by Nfound on Android File Host) are those that I can cofirm work on PIE vendors.
The other GSI's are best installed on top of stock Oreo vendors.
Most GSIs, VOLTE does NOT work (just 4G data) and PLAY Store is NOT certified (except John Galt's version as it's customized for our G6). Most Play Store needs Device ID apk to get GSF value to manually register your phone before Play store will work.

Is there no Android 10-based ROM for beckham? Not even treble?

I see a lot of gadgets (like the G7 plus bike that has the same hardware) with several Android 10-based Roms and it looks like our device has been forgotten. There is not even one in beta to installation?

There are no 10 ROMs (non GSI) available. In the telegram group there's work being done, but nothing has released. Be patient. Beckham doesn't have much support.

I came across a patched version of 3.3.1 twrp by "Jleeblanch" (and installed successfully) and also noticed an unofficial lineageOS 17 rom on the Android file host page for the z3 play. I have yet to try it though. Here is an install guide from cyanogenmods for it. https://www.cyanogenmods.org/moto-z3-play-lineageos-17/

so far?
gardensofgrief said:
I came across a patched version of 3.3.1 twrp by "Jleeblanch" (and installed successfully) and also noticed an unofficial lineageOS 17 rom on the Android file host page for the z3 play. I have yet to try it though. Here is an install guide from cyanogenmods for it.
Click to expand...
Click to collapse
So how is it working so far. I want to give it a shot, I am sad and tired of waiting for it officially.

Redman3000 said:
So how is it working so far. I want to give it a shot, I am sad and tired of waiting for it officially.
Click to expand...
Click to collapse
I found bugs in motomods and LiveDisplay.
Crashes on screen, it turning off but device is on.

Xavier2Bv said:
I found bugs in motomods and LiveDisplay.
Crashes on screen, it turning off but device is on.
Click to expand...
Click to collapse
Did you try the newest Lineage 17.1 that jleeblanch posted a few months ago? It works better than the one posted above. https://forum.xda-developers.com/showpost.php?p=83119095&postcount=54

NoMoreBackdoors said:
Did you try the newest Lineage 17.1 that jleeblanch posted a few months ago? It works better than the one posted above. https://forum.xda-developers.com/showpost.php?p=83119095&postcount=54
Click to expand...
Click to collapse
Thanks!
This ROM works better than Lineage 17.
I haven't have bugs, I installed it since yesterday and everything works well.

VoLTE issue in GSI

I don't know if I am only the one or not, but I can't able call someone or receive from someone and messages too.
Anybody know how to fix this?
I have searched many times and found that it is the issue with Mediatek.
Thanks
edit:-
From AOSP R 300j onwards, PHH is working on VoLTE because now he has a unlocked Realme C11 for testing VoLTE.

VoLTE isn't supported in AOSP ROMs, as someone was told me in other device forum.
But receiving calls and messages probably bugs, i suggest you to go back to MIUI or try reinstall if that can fix.

Minhvlvl said:
VoLTE isn't supported in AOSP ROMs, as someone was told me in other device forum.
But receiving calls and messages probably bugs, i suggest you to go back to MIUI or try reinstall if that can fix.
Click to expand...
Click to collapse
I have reinstalled many times, but the issue is same.

It seems that in 300j of AOSP R(11) VoLTE is fixed.

HemanthJabalpuri said:
It seems that in 300j of AOSP R(11) VoLTE is fixed.
Click to expand...
Click to collapse
Is your Mobile Data working in the GSI Rom?

EinTim23 said:
Is your Mobile Data working in the GSI Rom?
Click to expand...
Click to collapse
I didn't tested 300j. But Mobile Data is working fine in Android 10 without VoLTE.

HemanthJabalpuri said:
I didn't tested 300j. But Mobile Data is working fine in Android 10 without VoLTE.
Click to expand...
Click to collapse
OK, i Tested Android 11 GSI and Mobile Data wont Work there

EinTim23 said:
OK, i Tested Android 11 GSI and Mobile Data wont Work there
Click to expand...
Click to collapse
Post it in the XDA GSI thread or in Github issue tracker. Are you using PHH's AOSP?

HemanthJabalpuri said:
Post it in the XDA GSI thread or in Github issue tracker. Are you using PHH's AOSP?
Click to expand...
Click to collapse
i tried lineage os 18 gsi (which is using phhs) and caos (i think its aosp but idk). I will try erfan gsi now.
EDIT: Ok, it seems like installing erfan gsi causes an infinite boot.

[BUG] [Treble] WiFi disconnects 2 Minutes after locking screen

Hello, i installed Lineage OS based on Android 12.1 and 13 (A/B, vanilla, noSU).
Andy Yan's personal builds // GSI - Browse /lineage-20-td at SourceForge.net
sourceforge.net
In Both versions the WiFi disconnects 2 Minutes after locking the screen.
I looked into the logcat and found out it is an IPv6 bug. Disabling Ipv6 in the WiFi Router fixed the problem. Another workaround is to disable IPv6 over ADB.
The Problem is, some services rely on IPv6 which is why i dont want to disable it in the router. The ADB Workaround is just temporary, since it enabled again after a reconnection. This Bug is present for many years and different devices.
The LineageOS build are based on the TrebleDroid GSIs. This problem is also present in the TrebleDroid GSIs. Not a specific LineageOS problem.
altairfr-huawei - Browse /TrebleDroid-GSI at SourceForge.net
sourceforge.net
Does someone know a fix or workaround for this? Maybe a dev was dealing with this problem in the past and knows what needs to be done. I would really like to use Lineage OS 20 since it works pretty well and to get rid of google and huawei services. And of course latest security patches. But the permanently disconnecting WiFi is a dealbreaker. If not, the only option for me is going back to stock rom and debloat it via adb.

How did you install A11 and A12 on P10 when they have builds only for A/B devices from Android 12.
So last builds supporting from them should be LOS 18.1

MIcHiJK said:
Hello, i installed Lineage OS based on Android 12.1 and 13 (A/B, vanilla, noSU).
Andy Yan's personal builds // GSI - Browse /lineage-20-td at SourceForge.net
sourceforge.net
In Both versions the WiFi disconnects 2 Minutes after locking the screen.
I looked into the logcat and found out it is an IPv6 bug. Disabling Ipv6 in the WiFi Router fixed the problem. Another workaround is to disable IPv6 over ADB.
The Problem is, some services rely on IPv6 which is why i dont want to disable it in the router. The ADB Workaround is just temporary, since it enabled again after a reconnection. This Bug is present for many years and different devices.
The LineageOS build are based on the TrebleDroid GSIs. This problem is also present in the TrebleDroid GSIs. Not a specific LineageOS problem.
altairfr-huawei - Browse /TrebleDroid-GSI at SourceForge.net
sourceforge.net
Does someone know a fix or workaround for this? Maybe a dev was dealing with this problem in the past and knows what needs to be done. I would really like to use Lineage OS 20 since it works pretty well and to get rid of google and huawei services. And of course latest security patches. But the permanently disconnecting WiFi is a dealbreaker. If not, the only option for me is going back to stock rom and debloat it via adb.
Click to expand...
Click to collapse
i did not face such issue with wifi bug... in android 13 gsi on my huawei p10 running harmonyOS vendor.

anly11 said:
How did you install A11 and A12 on P10 when they have builds only for A/B devices from Android 12.
So last builds supporting from them should be LOS 18.1
Click to expand...
Click to collapse
p10 has SAR(A/B) it should boot fine on phh a12 and trebledroid a13 gsi

XDXDDX said:
i did not face such issue with wifi bug... in android 13 gsi on my huawei p10 running harmonyOS vendor.
Click to expand...
Click to collapse
Hello, thank you for the reply. I was on EMUI 9 or 9.1 i dont know exactly before installing a treble ROM. Can you give me some informations how to install the harmonyOS vendor?

in my case everything works fine on android a13 gsi even offline charging works too thanks to altairFR patches.

MIcHiJK said:
Hello, thank you for the reply. I was on EMUI 9 or 9.1 i dont know exactly before installing a treble ROM. Can you give me some informations how to install the harmonyOS vendor?
Click to expand...
Click to collapse
you need to rebrand it, go and find p10 oeminfo collection xda thread and there download the VTR-TL00 C01, its the only oeminfo that can rebrand to harmonyOS because the build number matches to current HarmonyOS selected. but i dont think its a good idea updating your device to harmonyOS because you will lose the functionality of booting to recovery using vol and power button, the procedure of flashing gsi in CN is also different compared to others, you need to factory reset first before flashing the gsi.

MIcHiJK said:
Hello, thank you for the reply. I was on EMUI 9 or 9.1 i dont know exactly before installing a treble ROM. Can you give me some informations how to install the harmonyOS vendor?
Click to expand...
Click to collapse
find me on telegram my username @pedrojvan, also emui 9.1 and harmonyOS have smaller system partiton size which you can only flash small vanilla gsi but thank goodness altairFR made an easy tool kit to repartition our huawei phones without any hastle or "risk". you can just download it on telegram also on sf, ig.

Pixel Experience [23.04.2023]

For a long time there were no updates to Pixel Experience from the Chinese and decided to assemble it myself.
04/23/2023
Patched bootloader with Magisk
For several days of testing, there are no errors.
Spoiler: Download
2023.04.23 https://drive.google.c…zUBW/view?usp=drivesdk
Recovery attached
Plus version attached but not patched by magisk
Spoiler: Installation
Important Notes:
To install the firmware, PixelExperience recovery is required, TWRP (RDS) support is not confirmed;
When moving from Android 12, memory formatting (Format Data) is mandatory;
Firmware from MIUI V12.5.6.0 is included in the firmware, do not install it separately;
SafetyNet check is passed by default, without additional modules (only enable MagiskHide if you have Magisk installed).
Clean install:
Install PixelExperience recovery via Fastboot;
Boot into the installed recovery, do Format Data (or Factory Reset);
Run Sideload along the path Apply Update -> from ADB;
Download the firmware from the connected PC with the command adb sideload filename.zip;
Reboot to the system.
Link to the official instructions with commands on the PixelExperience website (in English).
Itself was updated from the plus version to this one.

Where is download link

This rom has been out for a long time.
Xiaomi Mi 9 (cepheus) - PixelExperience
Xiaomi Mi 9 (cepheus) - PixelExperience
get.pixelexperience.org

MrWR said:
Where is download link
Click to expand...
Click to collapse
open access to download

Satit888 said:
This rom has been out for a long time.
Xiaomi Mi 9 (cepheus) - PixelExperience
Xiaomi Mi 9 (cepheus) - PixelExperience
get.pixelexperience.org
Click to expand...
Click to collapse
It's just an update. I made a fresh build

kotovasia said:
open access to download
Click to expand...
Click to collapse
Feeling great sir, are you interested in applying to be an official maintainer?

Satit888 said:
This rom has been out for a long time.
Xiaomi Mi 9 (cepheus) - PixelExperience
Xiaomi Mi 9 (cepheus) - PixelExperience
get.pixelexperience.org
Click to expand...
Click to collapse
For long time there is no update. Last update is more than 5 months ago. So project on official pixel experience site is dead.

MrWR said:
Feeling great sir, are you interested in applying to be an official maintainer?
Click to expand...
Click to collapse
If there are bugs, I can't fix them. I don't have the necessary knowledge. Just shared a stable build.

First off, thank you for putting in work!
Did you try an update (dirty flash) from the previous official a13 build?
Is it possible for you to also do a Plus build?

AcmE85 said:
First off, thank you for putting in work!
Did you try an update (dirty flash) from the previous official a13 build?
Is it possible for you to also do a Plus build?
Click to expand...
Click to collapse
The post says that I upgraded from plus to normal without clearing it.
I can try to build the plus version but without the sanity checks.

Hello, have you considered arrowos? Hopefully compile arrowos13, because 12.1 is really good to use, just stop changing it now. IN ADDITION, SINCE THE PE COMPILED FOR Chinese, DON'T USE GOOGLE, AND DON'T ADD GOOGLE IF CHINA DOESN'T USE GOOGLE, ISN'T IT BETTER TO MAKE A VANILLA VERSION?
Hi, ever considered arrowos? I hope to compile arrowos13, because 12.1 works really well, it's just that it's stopped being updated now. Also since it's compiled for Chinese people, don't use google, also China can't use google, don't add it, make it VANILLA version is not better?

AcmE85 said:
First off, thank you for putting in work!
Did you try an update (dirty flash) from the previous official a13 build?
Is it possible for you to also do a Plus build?
Click to expand...
Click to collapse
added version to header

kotovasia said:
added version to header
Click to expand...
Click to collapse
Just updated from the last official PE+ to your Plus build. So far so good!
Thanks for building and sharing.
Edit: I've noticed that screen off FOD stopped working, although it's still enabled. This might be caused by using Soviet kernel though.
Does anybody running the stock kernel have the same issue?
Edit2: It was a kernel issue. Latest soviet fixed screen off FOD.

AcmE85 said:
I've noticed that screen off FOD stopped working, although it's still enabled.
Click to expand...
Click to collapse
On the standard version, the fingerprint is read when the screen is off. Try turning this feature off and on. On Android, there is a false position of the switches.

Hi,
I'm noob at this stuff so excuse me if the question is stupid xD
I there a PE android 13 rom that will automatically update to the latest security patch or does it need to be rebuilt every time?

Vik :) said:
Hi,
I'm noob at this stuff so excuse me if the question is stupid xD
I there a PE android 13 rom that will automatically update to the latest security patch or does it need to be rebuilt every time?
Click to expand...
Click to collapse
security patches only in new builds.

kotovasia said:
Uzun bir süre Çinlilerden Pixel Experience güncellemesi gelmedi ve kendim toplamaya karar verdim.
04/23/2023
Magisk ile yamalanmış önyükleyici
Birkaç günlük test boyunca hata yok.
Spoiler: İndir
2023.04.23 https://drive.google.c…zUBW/view?usp=drivesdk
Kurtarma eklendi
Artı sürüm eklendi ancak magisk tarafından yama yapılmadı
Spoiler: Kurulum
Önemli notlar:
Üretici yazılımını yüklemek için PixelExperience kurtarma gereklidir, TWRP (RDS) desteği onaylanmamıştır;
Android 12'den taşırken bellek biçimlendirmesi (Verileri Biçimlendir) zorunludur;
MIUI V12.5.6.0'dan gelen aygıt yazılımı aygıt yazılımına dahildir, ayrıca kurmayın;
SafetyNet kontrolü, ek modüller olmadan varsayılan olarak geçilir (yalnızca Magisk kuruluysa MagiskHide'ı etkinleştirin).
Temiz kurulum:
Fastboot yoluyla PixelExperience kurtarmayı kurun;
Yüklü kurtarmaya önyükleme yapın, Verileri Biçimlendir (veya Fabrika Ayarlarına Sıfırla) yapın;
Sideload'ı ADB'den Güncellemeyi Uygula -> yolu boyunca çalıştırın;
Adb sideload filename.zip komutuyla bellenimi bağlı PC'den indirin;
Sisteme yeniden başlatın.
PixelExperience web sitesindeki (İngilizce) komutlarla resmi talimatlara bağlantı.
[/BİR ŞEYİN ÖNCEDEN REKLAMI]
Kendisi artı sürümden buna güncellendi.
Click to expand...
Click to collapse
Spoiler: Kurulum
miui kamera eklendi ? miui camera inside ?

miui camera eklendi mi? Miui kamera içeride mi?

After a couple days of using the unofficial Plus build, it works flawless without any issues.
Do you consider doing new builds with the May Patch level?

AcmE85 said:
After a couple days of using the unofficial Plus build, it works flawless without any issues.
Do you consider doing new builds with the May Patch level?
Click to expand...
Click to collapse
Builds are planned but now I'm focused on writing a script for building from under Windows.
Lots of problems with this.
Usually versions appear at the end of the month.