Related
My Redmi k20 pro stuck at MI logo.. how can I solve this... Pls help me.. I bought it 1 month ago.. warranty is void...
If you have a redmi and the phone stucks in the mi logo, I understand that the device is unlocked. Flash a fresh miflash rom. I hope you didn't close the bootloader in the last flash. If you did, you will have to ask for a EDL flash. 20$
CoñoWilly said:
If you have a redmi and the phone stucks in the mi logo, I understand that the device is unlocked. Flash a fresh miflash rom. I hope you didn't close the bootloader in the last flash. If you did, you will have to ask for a EDL flash. 20$
Click to expand...
Click to collapse
Bootloader is locked and also my k20 pro is locked it stucks at mi logo
Explain what you have done first and that to without unlocking bootloader which caused u to stuck at splash
trinadhchinna7 said:
Explain what you have done first and that to without unlocking bootloader which caused u to stuck at splash
Click to expand...
Click to collapse
I do nothing.. My mobile phone fell off from my hand and glass was broken.. and it stucks at MI logo..
Then I tried to fastboot flashing it but it shows me an error that your phone is in lock state so flashing is not an option now..
Also I tried flashing with RECOVERY ROM through MI assistant...
But all this not working...
Pls guide me how to I unbrick my phone..
aasif_shaykh said:
My mobile phone fell off from my hand and glass was broken.. and it stucks at MI logo.
Click to expand...
Click to collapse
Then it's probably an hardware issue: maybe internal components other than the screen are damaged (for example, the memory chip)...
So you won't fix this issue with a software solution...
If the boot loop happens when you have the phone connected with a cable, and it simply doesn't work when you don't have it connected with a cable, is because the battery connector was disconnected with the impact. In that case xz you have to open back cover ( with the nail, moving up and down) and removing the metal plate above the battery. Then connect back the connector and put back everything as before. Good luck
aasif_shaykh said:
Bootloader is locked and also my k20 pro is locked it stucks at mi logo
Click to expand...
Click to collapse
do u got any soluation?
CoñoWilly said:
If you have a redmi and the phone stucks in the mi logo, I understand that the device is unlocked. Flash a fresh miflash rom. I hope you didn't close the bootloader in the last flash. If you did, you will have to ask for a EDL flash. 20$
Click to expand...
Click to collapse
Can you tell where/how i can get EDL flash done??
I unlocked my redmi 4 (Santoni) boot loader and flashed pixel experience ROM (https://mega.nz/#F!INZgnAZI!9fuWhfCuazOO5YPBjxGlmA). It was working fine for a few days (Small heating issue was there). Then one day while i was charging the phone the phone turned off and never turn back on. When i try to switch on the mi logo flashes for a split second and then turns off. I tried to get into recovery but couldn't.
I can get into fastboot mode. I tried flashing the phone using Mi flash tool and fastboot rom. But it shows an error "flash tz error". When i tried an old version of mi flash tool i get the "Unspecified error (0x80004005: FAILED (remote: Critical partition flashing is not allowed))
Please Help.....
can you access the twrp?
foneiamone said:
can you access the twrp?
Click to expand...
Click to collapse
No. I can only access fastboot.
Somebody please help...
unbrick
u can get to edl fastboot with testpoints.
redmi 4x edl fastboot
in edl fastboot flashing should work again :angel:
PierceB said:
u can get to edl fastboot with testpoints.
redmi 4x edl fastboot
in edl fastboot flashing should work again :angel:
Click to expand...
Click to collapse
Dont know how to do that. But i saw some tutorials on how to. Gonna try it. Thank you for the suggestion.
jaseemharry said:
Dont know how to do that. But i saw some tutorials on how to. Gonna try it. Thank you for the suggestion.
Click to expand...
Click to collapse
Did already share a description! https://forum.xda-developers.com/showpost.php?p=74818435&postcount=3 Or U can buy a deepflash cable this should also work.
jaseemharry said:
No. I can only access fastboot.
Click to expand...
Click to collapse
Have you tried installing TWRP via fastboot?
I had the same exact problem, i put my phone on charge & when i came back to check it was switched off. It wouldn't turn on except the mi logo. I tried to flash through fastboot turns out my bootloader was re-locked for some reason. I had to re-unlock it then proceed on to fash fastboot miui rom. Check if your bootloader is locked or not.
foneiamone said:
Have you tried installing TWRP via fastboot?
Click to expand...
Click to collapse
obstinate_penguin said:
I had the same exact problem, i put my phone on charge & when i came back to check it was switched off. It wouldn't turn on except the mi logo. I tried to flash through fastboot turns out my bootloader was re-locked for some reason. I had to re-unlock it then proceed on to fash fastboot miui rom. Check if your bootloader is locked or not.
Click to expand...
Click to collapse
This is a good idea! Probably u first try to install trwp in fastboot mode. If this doesn't work try to unlock bootloader again and then install trwp.
When all these Option doesn't work u still can open the phone and use edl fastboot mode to flash miui again.
jaseemharry said:
I unlocked my redmi 4 (Santoni) boot loader and flashed pixel experience ROM (https://mega.nz/#F!INZgnAZI!9fuWhfCuazOO5YPBjxGlmA). It was working fine for a few days (Small heating issue was there). Then one day while i was charging the phone the phone turned off and never turn back on. When i try to switch on the mi logo flashes for a split second and then turns off. I tried to get into recovery but couldn't.
I can get into fastboot mode. I tried flashing the phone using Mi flash tool and fastboot rom. But it shows an error "flash tz error". When i tried an old version of mi flash tool i get the "Unspecified error (0x80004005: FAILED (remote: Critical partition flashing is not allowed))
Please Help.....
Click to expand...
Click to collapse
No big problem just go in edl mode
Search how to go in edl Redmi 4 in Google
Problem is your boot loader is locked
Harshad patel R said:
No big problem just go in edl mode
Search how to go in edl Redmi 4 in Google
Problem is your boot loader is locked
Click to expand...
Click to collapse
but he already unlocked his bootloader before so it should be easier to unlock in again and then flash whatever he wants...
PierceB said:
but he already unlocked his bootloader before so it should be easier to unlock in again and then flash whatever he wants...
Click to expand...
Click to collapse
One time fail in flashing = locked boot loader
Or for unlocking bootloader from official (easy) need live mobile not dead
foneiamone said:
Have you tried installing TWRP via fastboot?
Click to expand...
Click to collapse
Tried but failed. Boot loader was locked again somehow.
PierceB said:
This is a good idea! Probably u first try to install trwp in fastboot mode. If this doesn't work try to unlock bootloader again and then install trwp.
When all these Option doesn't work u still can open the phone and use edl fastboot mode to flash miui again.
Click to expand...
Click to collapse
Tried unlocking boot loader and was not successful because the phone was bricked. My only option was to use edl test point. Now i installed miui 11. (Aprart from some minor bugs which can be eliminated by reflashing some other roms) Thank you guys. Now my phone is successfully unbricked.
For somebody who is having the same issues,
My phone (Redmi 4_Santoni) was completely bricked. The only thing i can access was fastboot by pressing the volume down + Power button combination. But i could not install twrp or any other recovery because my boot loader was locked. I got it fixed completely with the help of you guys (Thanks again) and i want to share the procedure i went through.
Condition: Completely bricked with only fastboot access, Locked bootloader.
I tried this video (https://www.youtube.com/watch?v=j27x5iJSS40) but failed because i could not access recovery. So my only solution was to use edl test point flashing. I followed this guide https://forum.xda-developers.com/showpost.php?p=74818435&postcount=3. It was very easy to do. But in the device manager (Press Windows key + R and then type devmgmt.msc and press enter) instead of showing "Qualcomm HS-USB QDloader 9008", the device is shown as "Qualcomm HS-USB Diagnostics 900E". The problem was you have to plug in in USB cable while the test points is being connected with a pair of tweezers or a paperclip as shown in the link above.
Make sure you already downloaded the latest mi flash tool from here https://xiaomiflashtool.com/ and download fast boot rom from the official website. (Go to https://en.miui.com/ Click rom downloads. Click flashing guide. Download the fastboot rom from there for your device.) Now flash your device using mi flash tool and voila. your phone is unbricked.
Thank you guys..
1) I was using Sony Liv app screen dimmed about 2_3 times then screen goes on black and then phone vibrated. then i tried to power on device but it left on black screen ( 1/100 condition it goes to fastboot mode when i keep trying to push phone in fastboot mode but it goes rarely ).
For the problem i searched on Youtube on followed Edl method to fix my device
I downloaded all necessary files and driver:
- Mi flash tool (2019)
- Jasmine Global Rom ( Fastboot File , . Branch Stable - from official website )
- Qualcom Divers
i was doing this all in WINDOW 7
2) I connected the phone as shown and o flashed the rom (jasmine global fastboot file ) i got the success message while flashing
but then i tried to boot but it is on same condition that black screen .
3) So is there any point where i messed it up , is it possible to fix this device. Please let me know any possible solutions.
4) I never installed or tried to install custom roms, camera 2 api module or tried to unlock bootloader or anything it was running on stock.
please reply asap
and yeah XDA is <3
3nzoferrari said:
1) I was using Sony Liv app screen dimmed about 2_3 times then screen goes on black and then phone vibrated. then i tried to power on device but it left on black screen ( 1/100 condition it goes to fastboot mode when i keep trying to push phone in fastboot mode but it goes rarely ).
For the problem i searched on Youtube on followed Edl method to fix my device
I downloaded all necessary files and driver:
- Mi flash tool (2019)
- Jasmine Global Rom ( Fastboot File , . Branch Stable - from official website )
- Qualcom Divers
i was doing this all in WINDOW 7
2) I connected the phone as shown and o flashed the rom (jasmine global fastboot file ) i got the success message while flashing
but then i tried to boot but it is on same condition that black screen .
3) So is there any point where i messed it up , is it possible to fix this device. Please let me know any possible solutions.
4) I never installed or tried to install custom roms, camera 2 api module or tried to unlock bootloader or anything it was running on stock.
please reply asap
and yeah XDA is <3
Click to expand...
Click to collapse
What black screen?
Keno_I said:
What black sc
Click to expand...
Click to collapse
Keno_I said:
What black screen?
Click to expand...
Click to collapse
Wether i try to press
power on / power on + vol up / power on + vol down
in every condition screen just shows blank nothing else than this.
hope i am able to explain what you are asking .
Are you sure the screen isnt working?
Is it completely black or is their a backlight?
Keno_I said:
Are you sure the screen isnt working?
Is it completely black or is their a backlight
Click to expand...
Click to collapse
screen is working it lit up when i push power on button
yeah their is backlight .
The screen could be non functional, you have flashed full fastboot rom correct?
Keno_I said:
The screen could be non functional, you have flashed full fastboot rom correct?
Click to expand...
Click to collapse
not sure , but before bricking screen was completely functional and after bricking some times it goes to android one logo and also fastboot mode ( i explained this just to tell the condition of screen, )but after flashing screen is blank with backlight .
yes in mi flash tool in status it showed success ( and also i selected clean all before flashing )
first i downloaded the mi flash tool 2019 then downloaded fastboot file from official website of xaiomi and qualcom drivers then flashed and it successfully flashed.
3nzoferrari said:
1) I was using Sony Liv app screen dimmed about 2_3 times then screen goes on black and then phone vibrated
Click to expand...
Click to collapse
This suggests something could have happened to the display, bricks usually result in edl mode but fastboot should not show if it was hard brick no?
Soft brick is just non booting.
It is coming in success either means something wrong with the screen or maybe the drivers....
Can you enter fastboot and/or recovery mode to check that display is working?
Have you looked for MiFlash in a specially patched version?
Aerobatic said:
Can you enter fastboot and/or recovery mode to check that display is working?
Have you looked for MiFlash in a specially patched version?
Click to expand...
Click to collapse
I think it may be something to do with the display.
Cause MiFlash isn't failing
Kenora_I said:
This suggests something could have happened to the display, bricks usually result in edl mode but fastboot should not show if it was hard brick no?
Soft brick is just non booting.
It is coming in success either means something wrong with the screen or maybe the drivers.
Click to expand...
Click to collapse
may be.......will go to shop and check their that might confirm.
Aerobatic said:
Can you enter fastboot and/or recovery mode to check that display is working?
Have you looked for MiFlash in a specially patched version?
Click to expand...
Click to collapse
actually before flashing also ( when i didn't opened the back panel of mobile ) i wasn't able to enter into fastboot , yeah you can assume 1 in 100 times it enter into fastboot.
is it worth to change motherboard of mobile incase the mobile is hardbricked.
i am unable to understand the last line properly.
ps : sorry for late response , dont have alternate device
hi
i tried to install twrp with the help of a how to on the web but after flashing it and booting to recovery i had only black screen
so i tried to enter fastboot to fix it with no luck the phone doesn't respond to volume down + power
i manage to use adb reboot bootloader to enter fastboot when the phone was on black screen
so i tried again and flashed twrp image and misc.bin but it didnt work either
last thin i tried is installing boot.img extracted form official rom file >>and that was the end of the line for me
the phone keeps booting to redmi logo and before it even shows the Unlocked lock icon it shuts down and reboot again in an endless loop and i couldn't power it off or enter fastboot or recovery because volume up or volume down + power isn't getting any response
is there a fix to this ?
Any help?
I can help you bro
softmaster3 said:
hi
i tried to install twrp with the help of a how to on the web but after flashing it and booting to recovery i had only black screen
so i tried to enter fastboot to fix it with no luck the phone doesn't respond to volume down + power
i manage to use adb reboot bootloader to enter fastboot when the phone was on black screen
so i tried again and flashed twrp image and misc.bin but it didnt work either
last thin i tried is installing boot.img extracted form official rom file >>and that was the end of the line for me
the phone keeps booting to redmi logo and before it even shows the Unlocked lock icon it shuts down and reboot again in an endless loop and i couldn't power it off or enter fastboot or recovery because volume up or volume down + power isn't getting any response
is there a fix to this ?
Click to expand...
Click to collapse
What was your MIUI Version before installing twrp. You will lose your data for the fix. But its the matter of phone or no phone.
softmaster3 said:
Any help?
Click to expand...
Click to collapse
You device was global varient or chinese varient ?
You can checkout tutorials on using SP Flash tool to flash stock firmware, or I can explain when I get home. Also use spflash tool with MTK auth bypass or you won't be able to flash.
Had a pretty bad month as I completely killed my phones software. Heck I even deleted the preloader which is the core responsible thing for a mediatek chip based phone to boot. BUT SP flash tool saved the day.
You hard-bricked your phone, there's a guide I've made on how to recover it here.
[GUIDE][UNBRICK] How unbrick your bootloop in MERLIN after flashing TWRP (Xiaomi Redmi Note 9 / Xiaomi Redmi 10X 4G)
If you try to flash the file misc.bin your device can be in bootloop forever, please follow this guide to fix it. It works with: - Xiaomi Redmi Note 9 - Xiaomi Redmi 10X 4G Method 1: Once your device is on the black screen, plug it on USB (try...
forum.xda-developers.com
I flashed a twrp recovery in my poco m4 pro then using fastboot mode but i can't seem to flash it through "fastboot flash recovery", then i tried "fastboot flash boot" then it flashed the twrp. The problem is i went to reboot and clicked slot b then i rebooted my phone and it starts to bootloop and i can't enter the recovery and fastboot now. Please help me i can't even do anything to my phone now
earljames27 said:
I flashed a twrp recovery in my poco m4 pro then using fastboot mode but i can't seem to flash it through "fastboot flash recovery", then i tried "fastboot flash boot" then it flashed the twrp. The problem is i went to reboot and clicked slot b then i rebooted my phone and it starts to bootloop and i can't enter the recovery and fastboot now. Please help me i can't even do anything to my phone now
Click to expand...
Click to collapse
After draining the battery and trying the fastboot or recovery configurations as soon as you plugged into wall charger, still does not work?
LR7875 said:
After draining the battery and trying the fastboot or recovery configurations as soon as you plugged into wall charger, still does not work?
Click to expand...
Click to collapse
still bootlooping now, it has a charge left. Will it go to fastboot after draining the battery? i can't do anything now but to wait
earljames27 said:
still bootlooping now, it has a charge left. Will it go to fastboot after draining the battery? i can't do anything now but to wait
Click to expand...
Click to collapse
Maybe, idk, just let bootloop until it turns off, leave it for 1 day more, then try fastboot
LR7875 said:
Maybe, idk, just let bootloop until it turns off, leave it for 1 day more, then try fastboot
Click to expand...
Click to collapse
ok mate i'll let you know if it works.
LR7875 said:
Maybe, idk, just let bootloop until it turns off, leave it for 1 day more, then try fastboot
Click to expand...
Click to collapse
still not booting in fastboot mode or recovery mode after draining the battery, is there any way how to solve this?
No warranty by any chance? Then you might need choose between to pay a hundred bucks for an authorized account for EDL flashing, or to sold it as is for parts.
LR7875 said:
No warranty by any chance? Then you might need choose between to pay a hundred bucks for an authorized account for EDL flashing, or to sold it as is for parts.
Click to expand...
Click to collapse
finally fixed it with the help of an indian video lol indian saves the day, but anyways thanks for the advice mate
earljames27 said:
finally fixed it with the help of an indian video lol indian saves the day, but anyways thanks for the advice mate
Click to expand...
Click to collapse
Video link would be cool for other users then.
I also got the issue and managed to fix it with an exploit for Mediatek chips.
For others: feel free to DM if you have this issue (until someone post a good and understandable tutorial).
Eidenz said:
Video link would be cool for other users then.
I also got the issue and managed to fix it with an exploit for Mediatek chips.
For others: feel free to DM if you have this issue (until someone post a good and understandable tutorial).
Click to expand...
Click to collapse
This is the link for the giga chad indian tutorial lol
earljames27 said:
This is the link for the giga chad indian tutorial lol
Click to expand...
Click to collapse
Not work, Bootloop on Poco M4 Pro 5G. All drivers required are installed on pc and i connect the phone but the mtkclient not recognize him (holding vol down it recognize on brom mode, but i cannot do anything useful in this mode). Also don't changed a thing after write boot.img using brom mode.
Before i flashed an gsi rom (pixel experience plus 12.1(ponces)) with fastbootd after unlocking bootloader, doing everything right (the stock rom is very buggy).
And it started the bootloop.
I'm waiting the phone drains the battery to try to go to fastboot mode.
Update: I fixed it.
nice
Maroedes said:
Not work, Bootloop on Poco M4 Pro 5G. All drivers required are installed on pc and i connect the phone but the mtkclient not recognize him (holding vol down it recognize on brom mode, but i cannot do anything useful in this mode). Also don't changed a thing after write boot.img using brom mode.
Before i flashed an gsi rom (pixel experience plus 12.1(ponces)) with fastbootd after unlocking bootloader, doing everything right (the stock rom is very buggy).
And it started the bootloop.
I'm waiting the phone drains the battery to try to go to fastboot mode.
Update: I fixed it.
Click to expand...
Click to collapse
how did you fix it?
ps: i literally have the same situation of pixel experiance gsi and bootloop.