Database Develop

[TWRP][J5 Pro 2017] twrp recovery j5 pro 2017

Unofficial release -TWRP recovery for the Galaxy SM-J530F, Exynos7870
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this version just tested in J5 pro 2017 (android 7).
use latest kernel source from opensource.samsung.com
device tree : github
mtp not work in linux.
Instructions:
Flash with ODIN 3.10.7 in the AP slot.
Put your device in DOWNLOAD mode.
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME.
You should now see TWRP recovery.
NOTE: ON SOME ANDROID 5.1.1/6.0 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
DOWNLOAD:
http://www.mediafire.com/file/qpxypf08usashe4/twrp_v3.1.1_SM-J530F.tar
To Root:
Flash the latest SuperSU release with TWRP:
https://forum.xda-developers.com/app...2-05-t2868133/
To disable forced encryption and mount internal storage:
(Note this MUST be flashed after SuperSU if you intend to root)
1. Boot to Twrp
2. Format Data partition using FORMAT DATA button under Wipe options.
(Note: This will wipe the internal storage)
3. Check DATA is mountable.
4. Install SuperSU (if root is required)
5. Install boot image patch below.
6. Reboot
Boot image patch
http://www.mediafire.com/file/ln38z3q9c6iz3ny/patched-boot.tar

just putting my 2 cents in, this TWRP does not work with J530Y, it installs and boots to system after being installed but trying to reboot when you enter causes a boot loop incase any 1 comes across this and has the same model as me, my only complaint is the, debug? text in the terminal, but thats just a small gripe of mine

work in j530f duos 2GB RAM? no pro version?

twrp working fine.But when i rebooted i lost root.Super su not found installed .Should i reflash super su and boot image
---------- Post added at 10:36 AM ---------- Previous post was at 10:35 AM ----------
akaluptos21 said:
work in j530f duos 2GB RAM? no pro version?
Click to expand...
Click to collapse
i installed on pro version.2017 sm530f/fd version

work fine thks

and now?
any custom rom for j530f?

akaluptos21 said:
and now?
any custom rom for j530f?
Click to expand...
Click to collapse
Recovery came out yesterday and you already expect a rom to be ready ?? lol

what would happen if I flashed this on a frp locked SM-J530F? I assume that the OEM Unlocking is disabled, is it worth a shot or is it just a waste of time?

Can't moun data on SM-J530F (J5 2017) (non Pro)
Dont forget Point 2.(Format Data)
Now boot.img is taking a long time to flash. Trying to flash it in AP slot of Odin.
There is not an option in TWRP to install image.

Adlbert said:
There is not an option in TWRP to install image.
Click to expand...
Click to collapse
I dont understand, TWRP dont see boot patch file. In odin i cannot do anything

davidescion said:
what would happen if I flashed this on a frp locked SM-J530F? I assume that the OEM Unlocking is disabled, is it worth a shot or is it just a waste of time?
Click to expand...
Click to collapse
Waste of time

CeloxX said:
I dont understand, TWRP dont see boot patch file. In odin i cannot do anything
Click to expand...
Click to collapse
Mine could not see it as well. Maybe you should convert .tar to .img? After some research i found out TWRP can't flash .tar.
Although, recovery works fine without patching boot.

i did the same but end up well.Its working !!.Mine was both OEM and FRP locked .i did clean install of stock rom and disabled oem lock and installed twrp and rooted aswell.
---------- Post added at 05:30 AM ---------- Previous post was at 05:29 AM ----------
davidescion said:
what would happen if I flashed this on a frp locked SM-J530F? I assume that the OEM Unlocking is disabled, is it worth a shot or is it just a waste of time?
Click to expand...
Click to collapse
Adlbert said:
Mine could not see it as well. Maybe you should convert .tar to .img? After some research i found out TWRP can't flash .tar.
Although, recovery works fine without patching boot.
Click to expand...
Click to collapse
if u unzip that patch u would get .img and use that in twrp .

served in j5 Pro Sm-J530G?

FerXray13 said:
served in j5 Pro Sm-J530G?
Click to expand...
Click to collapse
check the model of the device according to the year

I root mine J530F yesterday and install twrp afterwords. It's working, but no 2/3/4G network anymore after flashing one of both.
Not possible to install boot image from twrp app. Also sound problems and brightness troubles.
I am going back to stock rom and wait for a while for a better later version.

Great news! :good:
---------- Post added at 08:29 AM ---------- Previous post was at 08:28 AM ----------
bockywocky said:
I root mine J530F yesterday and install twrp afterwords. It's working, but no 2/3/4G network anymore after flashing one of both.
Not possible to install boot image from twrp app. Also sound problems and brightness troubles.
I am going back to stock rom and wait for a while for a better later version.
Click to expand...
Click to collapse
I think you have to do the inverse process. Flash twrp and after supersu

Oke I start from scratch again...
Flashed the stok ROM first.
Enable OEM and USB debugging
Flashed TWRP twrp_v3.1.1_SM-J530F with Odin3 v3.12.7 and disable Auto Reboot option.
Important: Reboot my phone holding Vol down, Home button, Power button AND when vibrate, Imminently pushed Vol up, Home button, Power button to go directly into TWRP.
Install Magisk-v14.0 (it fails, but just do it instead of installing SuperSU)
Boot my phone and restore al my apps from the play store include root checker. It has already root acces now
Install MagiskManager-v5.3.0.apk and dowload inside this app Magisk-v14.0.zip and choose Update (recommended)
With MagiskManager you are now able to disable root checking apps like SnapChat from root access. So my Snapchat is still working now
Hope this will help you.
If so than let me know with :good:
Bocky Wocky

bockywocky said:
Oke I start from scratch again...
Flashed the stok ROM first.
Enable OEM and USB debugging
Flashed TWRP twrp_v3.1.1_SM-J530F with Odin3 v3.12.7 and disable Auto Reboot option.
Important: Reboot my phone holding Vol down, Home button, Power button AND when vibrate, Imminently pushed Vol up, Home button, Power button to go directly into TWRP.
Install Magisk-v14.0 (it fails, but just do it instead of installing SuperSU)
Boot my phone and restore al my apps from the play store include root checker. It has already root acces now
Install MagiskManager-v5.3.0.apk and dowload inside this app Magisk-v14.0.zip and choose Update (recommended)
With MagiskManager you are now able to disable root checking apps like SnapChat from root access. So my Snapchat is still working now
Hope this will help you.
If so than let me know with :good:
Bocky Wocky
Click to expand...
Click to collapse
Hey
Do you Wipe Data before u Flash The Stock rom

Do I have to install on J5 2017 (no PRO)?

[RECOVERY][ROOT]TWRP 3.2.3-1 Galaxy A7 2018/A750

Unofficial release -TWRP recovery for the Galaxy A7 2018 - SM-A750F EXYNOS 7885
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP 3.2.3-0 Released
Aug 6, 2018
TWRP 3.2.3-0 is out now for most currently supported devices.
What's new in 3.2.3-0:
* Fix automatic installing of OTA zips on encrypted devices
* Remove SuperSU from TWRP
* Support both md5 and md5sum file extensions when doing MD5 checking for zip files
Want to get notifications when we release new versions of TWRP? Install the TWRP app and select your device!
We need your help! The bulk of TWRP work is done by a handful of people on a volunteer basis. We have pushed most of our device files to our github and we have a gerrit instance. If you have the ability, please help us maintain our official devices and/or add your device to our official device list. Thanks in advance!
You can track the progress of builds here
Update 25/12/2018
Beta build released.
Current status - (Tested working)
Treble supported
You flash this at your own risk. Please ensure you have the stock ROM to hand downloaded from SAMMOBILE in case of problems. This will trip the knox counter.
NOTE: ON ANDROID 5.1.1> DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
*****INSTALL INSTRUCTIONS:*****
Flash with ODIN in the AP slot.
1. Put your device in DOWNLOAD mode.
(Hold POWER + VOL DOWN + VOL UP)
2. Load the file below into the AP slot, uncheck AUTO-REBOOT and hit start.
twrp_3.2.3-1_a750_251218
3. After flashing and ODIN reports PASS immediately force reboot to recovery. Do NOT let the device boot to the OS.
You should now see TWRP recovery.
4. Flash the RMM bypass zip
https://forum.xda-developers.com/attachment.php?attachmentid=4481843&d=1524258795
NOTE: FAILURE TO FOLLOW THE STEPS ABOVE IMPLICITLY WILL RESULT IN STOCK RECOVERY REPLACING TWRP AT FIRST BOOT.
5. Reboot to TWRP (Do not boot to the OS yet)
*****OREO ROOT INSTRUCTIONS:*****
NOTE: To mount data it is necessary to first *FORMAT* (not wipe) the /DATA partition using the FORMAT DATA button under the wipe options.
PLEASE NOTE THIS WILL DELETE EVERYTHING ON INTERNAL STORAGE AND FACTORY RESET THE DEVICE, SO BACK UP ANYTHING YOU WISH TO KEEP.
Continue with the instructions below to prevent the data partition becoming re-encrypted.
1. To root I suggest downloading and installing the latest Magisk as this is a currently supported project, SuperSu is no longer getting active development.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
2. Copy the Magisk zip to a Micro sd card then install with TWRP.
3. Enjoy your rooted device.
DEVICE TREE: soon
PLEASE DO *NOT* DIRECT LINK TO THESE FILES. PLEASE LINK TO THIS POST
Credits: Me, Teamwin, @BlackMesa123 for RMM bypass zip.
Please note I don't own this device and spend a lot of my free time bringing these builds for you to use and benefit from.
FEEDBACK IS APPRECIATED PLEASE.
THANKS.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU

158 views, 20 downloads and not one reply.
Smashing guys. :good:

4. перепрограммируйте обходной zip- архив rmm.можно поподробнее?
Mod edit: English please!
Google translation:
4. reprogram the rmm bypass zip archive. can you be more specific?

Odin shows Failed !! Tried 3 Times ? Had to Flash the Firmare Again.
Help !!

notoriouschyld said:
Odin shows Failed !! Tried 3 Times Had to Flash the Firmare Again.
Help !!
Click to expand...
Click to collapse
Sorry about that, build error on my end. Fixed now.

It will not work on SM-A750FNXXU1ARIC?

Sfuj24 said:
It will not work on SM-A750FNXXU1ARIC?
Click to expand...
Click to collapse
Is that a statement or question?

Hey. Does it work well? I wanted to install myself. but it seems to me that this is not a complete instruction. Does OEM unlock need to be enabled?

powermen27 said:
Hey. Does it work well? I wanted to install myself. but it seems to me that this is not a complete instruction. Does OEM unlock need to be enabled?
Click to expand...
Click to collapse
No matter how complete an instruction is, if you don't bother reading it in the first place it's not going to make any difference.
As clearly posted in the OP:
NOTE: ON ANDROID 5.1.1> DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
Click to expand...
Click to collapse

sorry

ashyx said:
Sorry about that, build error on my end. Fixed now.
Click to expand...
Click to collapse
Tried with the new TWRP.img but I'm having a Bootloop on the Samsung Boot Screen.
Help
Take your Time !!

notoriouschyld said:
Tried with the new TWRP.img but I'm having a Bootloop on the Samsung Boot Screen.
Help
Take your Time !!
Click to expand...
Click to collapse
Can you tell me which firmware build number you are running and if possible a screen shot of your device screen while booted to download mode?

Stuck in bootloop after flashing twrp
A750FXXU1ARK7

A7whatever said:
Stuck in bootloop after flashing twrp
A750FXXU1ARK7
Click to expand...
Click to collapse
Can you try this build, it's built with the kernel from the latest source available - A750FNXXU1ARIC.
Be aware OEM unlock must be enabled and you MUST boot to TWRP immediately after flashing with ODIN. Do not boot to the OS.
In TWRP immediately install Magisk.
https://androidfilehost.com/?fid=11410963190603874542

ashyx said:
Can you try this build, it's built with the kernel from the latest source available - A750FNXXU1ARIC.
Be aware OEM unlock must be enabled and you MUST boot to TWRP immediately after flashing with ODIN. Do not boot to the OS.
In TWRP immediately install Magisk.
Click to expand...
Click to collapse
Same bootloop at the Samsung screen
However i use heimdall not odin so I have to unpack the tar file and flash the recovery image. i also use it to flash the stock recovery and it works perfectly
Does using it make a difference?
Edit: my phone is A750FNXXU1ARK2
A750FXXU1ARK7 Was my build number

A7whatever said:
Same bootloop at the Samsung screen
However i use heimdall not odin so I have to unpack the tar file and flash the recovery image. i also use it to flash the stock recovery and it works perfectly
Does using it make a difference?
Edit: my phone is A750FNXXU1ARK2
A750FXXU1ARK7 Was my build number
Click to expand...
Click to collapse
Can you flash the bootloader from A750FNXXU1ARIC and see if it boots twrp?

ashyx said:
Can you flash the bootloader from A750FNXXU1ARIC and see if it boots twrp?
Click to expand...
Click to collapse
Flashed the old sboot.bin however got the same bootloop

A7whatever said:
Flashed the old sboot.bin however got the same bootloop
Click to expand...
Click to collapse
So just to be clear :
Immediately after flashing twrp you are forcing a boot to recovery directly from ODIN?

ashyx said:
So just to be clear :
Immediately after flashing twrp you are forcing a boot to recovery directly from ODIN?
Click to expand...
Click to collapse
Yes

A7whatever said:
Yes
Click to expand...
Click to collapse
Hmm looks like I'll have to take another look at the twrp config or kernel build.
If I pack the kernel into a boot image would you be willing to test if it boots?

[RECOVERY][UNOFFICIAL] TWRP for Galaxy S10 5G (Snapdragon)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or your getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Supported Models:
Galaxy S10 5G G9770, G977U, G977U1 and G977W.
US/Canada bootloader unlock thread:
here
Download & Guide:
1. Unlock your bootloader.
2. Download S10 5G: beyondxq.
3. Reboot to download mode and flash vbmeta_disabled.tar in AP slot and reboot. Device will reboot to stock recovery mode prompting you to wipe data so wipe data and reboot to download mode again.
4. Put the TWRP tar for your device with Odin in the AP slot and click start.
5. Reboot to recovery via recovery key combo.
6. Disable encryption:
- Go to Advanced > Terminal, type: multidisabler.​If vendor complain about free space left on device, will attempt to resize vendor. and it ask to - Run multidisabler again!.​- Type: multidisabler again. will see - Finished. when done.​7. Go back to Wipe > Format Data > type yes.
8. Reboot to recovery.
9. Flash magisk apk in twrp.
10. Reboot to system, Enjoy.
Note:
Code:
To disable encryption manually:
You need to replace fileencryption=ice with encryptable=ice only in userdata line (maybe rest lines) in vendor/etc/fstab.qcom
To avoid stock recovery restoration manually:
Rename system/recovery-from-boot.p to recovery-from-boot.p.bak
Support:
Live support is available via #twrp on Freenode with your IRC client or just click this link.
Telegram group
Bugs:
- Encryption not fully working.
Thanks:
TWRP team
@Mentalmuso for base device tree
@jesec for unlock guide
@ianmacd for multidisabler
Sources:
Kernel tree
Device tree

Changelog:
30.11.2021 - Update to TWRP 3.6.0
- Update multidisabler
27.04.2021 - Update to G977PVPU6FUBH kernel source
31.12.2020 - Update TWRP to 3.5.0
20.11.2020 - Initial Release

You can add the G977P/T to the list as working, confirmed working on my G977T.

Is this still good for android 11?

If you need to download the latest version's twrp, you can do it this link(Download TWRP for beyondx)

G977B supported? Android 11?

Yoonwoo said:
If you need to download the latest version's twrp, you can do it this link(Download TWRP for beyondx)
Click to expand...
Click to collapse
This is the wrong one, this is for exynos, we are dealing with snapdragon here.

razercortex said:
You can add the G977P/T to the list as working, confirmed working on my G977T.
Click to expand...
Click to collapse
Just got my G977P, getting info on how to root Android 11 G977PVPS5EUA4, trying not to brick my device. Any tips on how to do it the safe way? First time trying to root Snapdragon device.

Absolutely! You need to first unlock the bootloader, so go into developer options and enable OEM unlock. After you enable it, reboot to DL mode by volume down + power. Select the power keys that allow for unlock and confirm with the displayed key press. After, follow this thread's guide. Then, download Magisk from the official github, it should be from topjohnwu, it will be in apk format, just rename it to zip. Flash in TWRP and you will be good to go!

razercortex said:
Absolutely! You need to first unlock the bootloader, so go into developer options and enable OEM unlock. After you enable it, reboot to DL mode by volume down + power. Select the power keys that allow for unlock and confirm with the displayed key press. After, follow this thread's guide. Then, download Magisk from the official github, it should be from topjohnwu, it will be in apk format, just rename it to zip. Flash in TWRP and you will be good to go!
Click to expand...
Click to collapse
Thanks! Is it safe to update to latest official software update before installing TWRP?

Yes, it shouldn't matter.

razercortex said:
Yes, it shouldn't matter.
Click to expand...
Click to collapse
Confirmed working on G977P, so fast and easy, thanks for the support!

razercortex said:
You can add the G977P/T to the list as working, confirmed working on my G977T.
Click to expand...
Click to collapse
Man I'm at a loss, I've followed this guide and nothing makes sense in terms of.
I'll get twrp installed just fine but the second i reboot my device it'll either throw me back into twrp or I'll get stuck in "Android is starting" and nothing will happen for hours. I'm on G977p and my bootloader is unlocked

Nexu F said:
Man I'm at a loss, I've followed this guide and nothing makes sense in terms of.
I'll get twrp installed just fine but the second i reboot my device it'll either throw me back into twrp or I'll get stuck in "Android is starting" and nothing will happen for hours. I'm on G977p and my bootloader is unlocked
Click to expand...
Click to collapse
Did you flash vbmeta? Also, starting android for the first time takes a really long time.

razercortex said:
Did you flash vbmeta? Also, starting android for the first time takes a really long time.
Click to expand...
Click to collapse
I did yes. I'll try this doing this guide once more later tonight. Could be quite possible I'm missing a step or didn't pay close attention to one since the others with the same Device on this thread reported a success

razercortex said:
Did you flash vbmeta? Also, starting android for the first time takes a really long time.
Click to expand...
Click to collapse
Any rough idea to how long the starting Android could take before i stop it?

Is the SM-G977N korean model supported
Android 11
Do you know how to access OEM Unlock in development. There is no sign of it on this phone.
Thanks

Any updates for Android 12 G977PVPS8HVE1 for SM-G977P (Sprint)? I can see the official firmware already out, but waiting for working version of TWRP.

Yo, idiot. This guide is for Beyondx not Snapdragon. Misleader.....

[Android 11][Recovery][A715F]TWRP 3.5.1 [ianmacd]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about doing this to your device
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Team Win Recovery Project is a custom recovery for Android devices.
It allows you to back up and restore your data, flash custom ROMs to your device, repair broken file systems, root your device and more.
Disclaimer:
- I do not claim this work as my own, this thread was created to have an XDA thread for A71 TWRP. I will try my best to keep it up to date with Ian's work, but can't promise that will remain for ever. If you want the latest TWRP and to be notified as soon as its published, be sure to join the Telegram channel.
- I am not responsible about any damage of any kind that this custom binary may cause.
- Please read the whole main post & related ones before proceed and follow the guide as it is wrote. I will not offer support for any issues that have been already stated.
- Your Knox Warranty Bit will be blown once you flash this or others custom binaries, preventing you to use Knox Features. It can't be resetted in any way, so think twice before flashing this.
- Bugs can be reported here in XDA or via our Telegram Group. Please be more clear as possible and make sure you provide detailed info when reporting bugs (device variant and logcat).
How to Install:
First, you need to unlock the bootloader. Here's how to do it:
- Backup all media before proceeding, this will erase everything in your internal storage including music and photos
- Go to developer settings and enable [OEM Unlock]
- Reboot to download mode
- When prompted, press and hold VOL + to enter bootloader unlock mode
- Press VOL + to confirm you want to unlock bootloader, this will wipe your data
- If you think the bootloader is fully unlocked, it is actually not! Samsung introduced VaultKeeper, meaning the bootloader will still reject any unofficial partitions before VaultKeeper explicitly allows it.
- Go through the initial setup. Skip through all the steps since data will be wiped again later when we flash TWRP and magisk
- Enable developer options, and confirm that the OEM unlocking option exists and is grayed out. This means the VaultKeeper service has unleashed the bootloader. This step is MANDATORY
- Your bootloader now accepts unofficial images in download mode.
After finally unlocking the bootloader, proceed with installing TWRP (tar) with Odin:
- Boot to download mode and load TWRP tar file and VBMeta disabler tar file in AP and BL of Odin, doesn't matter which goes where
- Disable [Auto Reboot] in Odin
- Flash
- Force a reboot by pressing VOL+, VOL - and POWER buttons at the same time
- After the screen goes black, IMMEDIATELY let go of all buttons and IMMEDIATELY press and hold VOL+ and POWER button at the same time to boot to TWRP
- After booting to TWRP successfully, go to WIPE in TWRP
- At the bottom, you should see an option to FORMAT DATA. After you select it, you will be asked to type "yes" in your keyboard. If you do not see this, you probably selected the wrong option.
- After formatting data, flash the Multidisabler zip with TWRP. This is done to avoid future bootloops.
(Optional) Flash magisk.zip to root (google where to find it)
- Reboot to system
- Wait patiently for the device to boot for the first time
How to flash TWRP (img):
- Reboot to recovery
- Select Install
- Select Install Image and search for the TWRP img file
- Flash as recovery
- Reboot to recovery
- Done
Downloads:
twrp-a71-3.5.1_10-A11_2b1_ianmacd.img
twrp-a71-3.5.1_10-A11_2b1_ianmacd.tar
Multidisabler zip by Ianmacd
VBMeta disabler
Source Code: https://github.com/ianmacd/twrp_a71
Source Code: https://github.com/ianmacd/a71
Change log:
17/03/21: Release for Android 11 BL
Credits:
- Samsung for kernel source code
- TeamWin for their awesome recovery
- @ianmacd for compiling, updating, and maintaining for A71

reserved 1

reserved 2

Sorry for the delay, this TWRP should work perfectly with Android 11 BL

Thanks! However, it kept encrypting after booting to Recovery? Already format and flash Multidisabler zip by Ianmacd.
After several tries, it did not encrpt any more. It really beats me. Anyway, great job. Thanks!

@ShaDisNX255 have you came across config files for Link to Windows / Your Phone Companion, namely something to do with features enabled ?
Now that A71 got OneUI 3.1 (A11) I was wondering if there is a way to enable multi-apps in Link to Windows.
I also wonder if this "multi-apps" new feature in A11 needs to be enabled in OneUI too (or maybe there isn't a Link to Windows special toggle at all, only system one).
All I know is that only the high tier Samsung phones has multi-apps streaming to Windows, like S21, Note20, Fold and Z Flip but also last gen S20 and Note10.
Would like to hear your thoughts on this.
EDIT: the backbone of the feature is this: https://www.xda-developers.com/android-q-splitscreen-multitasking-multi-resume/

donkeyman1234 said:
Thanks! However, it kept encrypting after booting to Recovery? Already format and flash Multidisabler zip by Ianmacd.
After several tries, it did not encrpt any more. It really beats me. Anyway, great job. Thanks!
Click to expand...
Click to collapse
Very strange. Hopefully your issue is fixed, I'll try and see what could be wrong. Thanks for the input.

ban.codrut said:
@ShaDisNX255 have you came across config files for Link to Windows / Your Phone Companion, namely something to do with features enabled ?
Now that A71 got OneUI 3.1 (A11) I was wondering if there is a way to enable multi-apps in Link to Windows.
I also wonder if this "multi-apps" new feature in A11 needs to be enabled in OneUI too (or maybe there isn't a Link to Windows special toggle at all, only system one).
All I know is that only the high tier Samsung phones has multi-apps streaming to Windows, like S21, Note20, Fold and Z Flip but also last gen S20 and Note10.
Would like to hear your thoughts on this.
EDIT: the backbone of the feature is this: https://www.xda-developers.com/android-q-splitscreen-multitasking-multi-resume/
Click to expand...
Click to collapse
I haven't used the Link to Windows feature, I don't really have a good understanding of what you mean.

ShaDisNX255 said:
Very strange. Hopefully your issue is fixed, I'll try and see what could be wrong. Thanks for the input.
Click to expand...
Click to collapse
I took a shot of log.

I'm running stock Android 11 and I've tried to make a backup with TWRP but failed with this message:
Can create '/data/media/o/TWRP/ folder (required key not available).
Failed to make backup folder.
It means that I'm encrypted, right ??. If I'm correct, should I format data and flash the new multidisabler ?
EDIT: on A10 it was unencrypted, flashing A11 encrypted it again?

viktor92 said:
I'm running stock Android 11 and I've tried to make a backup with TWRP but failed with this message:
Can create '/data/media/o/TWRP/ folder (required key not available).
Failed to make backup folder.
It means that I'm encrypted, right ??. If I'm correct, should I format data and flash the new multidisabler ?
EDIT: on A10 it was unencrypted, flashing A11 encrypted it again?
Click to expand...
Click to collapse
Yes, you must format and flash multidisabler.

Question, i went though the bootloader unlock but the option don't appear grey out on the dev menu, what should i do to really unlock it?
Edit:
Ok i manage to do it but idk how to reboot in to TWRP, is it vol+ and power? it isn't working

Pupet_Master said:
Question, i went though the bootloader unlock but the option don't appear grey out on the dev menu, what should i do to really unlock it?
Edit:
Ok i manage to do it but idk how to reboot in to TWRP, is it vol+ and power? it isn't working
Click to expand...
Click to collapse
Android 11 changes the way it works
Now, it is necessary to be connected to a PC to boot to recovery with that combination of keys.

ShaDisNX255 said:
Android 11 changes the way it works
Now, it is necessary to be connected to a PC to boot to recovery with that combination of keys.
Click to expand...
Click to collapse
Thanks Friend

I have a Samsung A71 Anroid 11 and I'm also trying to root it. Everything you have written I understand, up to this point:
"- After formatting data, flash the Multidisabler zip with TWRP. This is done to avoid future bootloops."
I answer "Yes" and than at the next screen I only can choose between Back or Reboot. How must I flash at this stage the Multidisabler?
Must I go back to the TWRP main menue to the Point "install"?
Greetings from Cologne
Germany
Norbert

Nobby52 said:
I have a Samsung A71 Anroid 11 and I'm also trying to root it. Everything you have written I understand, up to this point:
"- After formatting data, flash the Multidisabler zip with TWRP. This is done to avoid future bootloops."
I answer "Yes" and than at the next screen I only can choose between Back or Reboot. How must I flash at this stage the Multidisabler?
Must I go back to the TWRP main menue to the Point "install"?
Greetings from Cologne
Germany
Norbert
Click to expand...
Click to collapse
Yes, you have to go back to the main menu

Thank you, I'll try it again.
Norbert

Unfortunately, this method doesn't work for me. I've tried rooting three times. It went through every time without any errors. The device was not rooted afterwards. The smartphone then triggered a reset every few minutes when it was operated. What can I do?
Greetings from Cologne
Norbert

Nobby52 said:
Unfortunately, this method doesn't work for me. I've tried rooting three times. It went through every time without any errors. The device was not rooted afterwards. The smartphone then triggered a reset every few minutes when it was operated. What can I do?
Greetings from Cologne
Norbert
Click to expand...
Click to collapse
What ROM are you trying to root?
Are you Rooting with Magisk or Super SU? Do you install SUper SU App or Magisk Manager after?
About the reset, did you flash the multiboot disabler after flash the root zip file?

I root the original Samsung Stock Rom. "A715FXXU3BUB5_A715FOXM3BUB6_DBT". I followed the instructions here exactly.
First unroot and debug mode
1.) download mode
2.) with Odin TWRP + VBMeta-Disabler
3.) TWRP started, wipe, then yes, then back to install, Multidisabler.zip flashed.
4.) restarted
That was it
I don't have a Super_SU or Magisk installed
greeting
Norbert

How To Guide [GUIDE][REALME 8i][NARZO 50] Unlock Bootloader Flash TWRP and Root [RMX3151][RMX3286]

Hi Guys!
Since there is no deeptest.apk available for our device to unlock bootloader, we came up with another method to unlock bootloader unofficially!
In this guide I'll tell you how to unlock bootloader, root with magisk and flash TWRP on your Realme 8i/Narzo 50 (RMX3151/RMX3286)
Code:
/*
* This Guide is tested and working
* However I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about unlocking and flashing TWRP
* before flashing it! YOU are choosing to make these modifications.
*/
1. UNLOCKING BOOTLOADER:
Requirements
PC or Laptop
Internet connection
Realme 8i/Narzo 50
USB cable
Working Brain
Take a backup of your data since it'll be wiped
Go to About phone > Version and tap build number 7 times
Go to Settings > advanced settings > Developer options and turn on OEM unlocking and USB debugging
STEPS
Install Python from windows store
Install USBDk
Download this and extract : https://github.com/bkerler/mtkclient/archive/refs/heads/main.zip
Download vbmeta and patched boot image (Download for your respective version) in copy to the mtkclient-main folder
Now open command prompt or powershell in that folder
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now type pip3 install -r requirements.txt and hit enter
Now type python mtk e metadata,userdata,md_udc hit enter - This command wipes data
Then power off your phone and hold both volume buttons and connect usb cable (DON'T LEAVE THE BUTTONS, KEEP THEM HOLDING THROUGHOUT THE PROCESS) - This boots device into BROM mode
Now type python mtk da seccfg unlock This will unlock the bootloader (If you face waiting for device issue then unplug the device and plug in the device again with holding volume buttons, also don't leave the buttons)
After this unplug your phone and turn it on (It'll show your device dm verity corrupted and first boot might take 20-25 mins, don't panic)
Now your bootloader is unlocked
Due to realme's limitations you still can't access fastboot after unlocking via this method
2. ROOTING YOUR DEVICE:
Install This Magisk apk
Now in pc type python mtk w boot,vbmeta boot.patched,vbmeta.img.empty hit enter
Then power off your phone and connect usb while holding both volume buttons (and don't leave them)
Now disconnect and reboot phone
Now open magisk
3. FLASHING TWRP RECOVERY:
Download TWRP - From here
Download and install Flashify app
Open Flashify and grant root permission
Select Recovery image and install the twrp you have downloaded
After flashing is done click reboot now or you can reboot to recovery via magisk app
"Congrats Now we have working TWRP in our Realme 8i/Narzo 50"
Credits:
Me (@pritish1998) for TWRP, Unlock and Flashing guide
B Kerler fot MTKClient
Rohit for testing
Stock boot Images (to revert root)
If you face any issues contact me here

Thanks for the detailed guide, hope we get kernel sources soon..

sany.svenson said:
Добрый вечер.А как теперь заблокировать загрузчик,подскажите пожалуйста.
Click to expand...
Click to collapse
English is required, you can use your native language too, adding it to your post.
Inside the tool is provided a README.md file with basic instructions and usage. To relock bootloader you can use python mtk xflash seccfg lock just be careful to not relock it while running custom binaries, you have to return completely back to stock prior to do that.

After using boot.img from this topic wifi is dead! Now I need original boot to patch it. My firmware is A20. Somebody help!

DimaS_EKB said:
After using boot.img from this topic wifi is dead! Now I need original boot to patch it. My firmware is A20. Somebody help!
Click to expand...
Click to collapse
The provided boot image is from A30... Why are u still using A20?

I didn't know about A20 or A30 or anything. You should have mentioined this! Better off dump user's own boot.img and patch it with magisk. Now I have problems. It is good that I've found A20 firmware but it was not easy, I've lost a lot of time to read about firmwares, patching etc.

DimaS_EKB said:
I didn't know about A20 or A30 or anything. You should have mentioined this! Better off dump user's own boot.img and patch it with magisk. Now I have problems. It is good that I've found A20 firmware but it was not easy, I've lost a lot of time to read about firmwares, patching etc.
Click to expand...
Click to collapse
Download stock boot image from here I've saved them https://mega.nz/folder/BvpwibLB#lDDAbRG5SMKS4ucdj1dELg
Also there is nothing to mention at the time of making this guide almost everyone was updated to A.30, but no problem now I've updated the link for all patched boot images

recovered, thanks
now I'm updating to A32
what's next?
download your patched boot image for A32? and that's all?

DimaS_EKB said:
recovered, thanks
now I'm updating to A32
what's next?
download your patched boot image for A32? and that's all?
Click to expand...
Click to collapse
Yes

pritish1998 said:
Yes
Click to expand...
Click to collapse
Sorry but it appears I cannot update. I tried original and modified boot.img, also I installed original recovery. It doesn't help. The phone downloads the A32 firmware, reboots and cannot start recovery mode to update the firmware.

DimaS_EKB said:
Sorry but it appears I cannot update. I tried original and modified boot.img, also I installed original recovery. It doesn't help. The phone downloads the A32 firmware, reboots and cannot start recovery mode to update the firmware.
Click to expand...
Click to collapse
Flash stock boot, vbmeta and recovery then format data then reboot

If I flash stock vbmeta it cannot boot. Is that ok? Should I erase data anyway?

DimaS_EKB said:
If I flash stock vbmeta it cannot boot. Is that ok? Should I erase data anyway?
Click to expand...
Click to collapse
Yes

pritish1998 said:
Yes
Click to expand...
Click to collapse
Format data

Thanks! Now everything works fine!

pritish1998 said:
Download stock boot image from here I've saved them https://mega.nz/folder/BvpwibLB#lDDAbRG5SMKS4ucdj1dELg
Also there is nothing to mention at the time of making this guide almost everyone was updated to A.30, but no problem now I've updated the link for all patched boot images
Click to expand...
Click to collapse
how to flash stock boot image?

bobongros said:
how to flash stock boot image?
Click to expand...
Click to collapse
python mtk w boot boot.img

pritish1998 said:
python mtk w boot boot.img
Click to expand...
Click to collapse
can i dm you? please help me my phone is bricked

bobongros said:
can i dm you? please help me my phone is bricked
Click to expand...
Click to collapse
How did your phone brick?