*** Disclamer
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
This is unofficial build Lineage20 for LG G8 ThinQ (alphalm)
Please backup your data before installing！！！！！
Installation instructions
Install Stock S/R ROM onto your phone（recommendation）；
Boot twrp install this rom;
The TWRP install ROM may automatically switch to slot_b so I recommend unpacking and flashing into the individual partitions in IMG form;
If you can use QPST(QFIL) flashing, I recommend that you use this method to flash each IMG to the corresponding partition, such as flashing to slot_a；
boot.img -->boot_a,dtbo.img --> dtbo_a, system.img --> system_a, vendor.img --> vendor_a, product.img --> product_a ,vbmeta.img --> vbmeta_a;
Of course, you can also install this rom from TWRP normally。
WHAT WORKS?
Almost everything
WHAT DOESN'T WORK?
Volte
Links：
GCam For Wide Angle Back Camera
GCam Hub MGC_8.1.101_A9_PV0i
Go to this link and download MGC_8.1.101_A9_PV0i_MGC.apk
GAPPS
NIKGAPPS
Go link download now --> release -->NIKGAPPS-T Choose the version you want to download, recommended (omni)
ROM DOWNLOAD
lineage-20.0-20230423-UNOFFICIAL-alphalm
THANKS TO
anht3889
GPL compliance:
ROM Source：https://github.com/LineageOS
KERNEL Source：https://github.com/MomoYuuki
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
View attachment 5895959
Thank you for sharing. Finally, I am able to receive updates.
lufan said:
Thank you for sharing. Finally, I am able to receive upd
Click to expand...
Click to collapse
Without major bugs, updates may be slower
Finally an updated rom. Thanks for the Rom.
Hi, Thank you for your work but i would like to ask, i currently am at Android 10 with unlocked bootloader and magisk installed, but I don't have TWRP installed. So, is there anyway to unpack this rom so I can install it using QFIL?
moomlufi said:
Hi, Thank you for your work but i would like to ask, i currently am at Android 10 with unlocked bootloader and magisk installed, but I don't have TWRP installed. So, is there anyway to unpack this rom so I can install it using QFIL?
Click to expand...
Click to collapse
You can decompress the ROM and extract the img scene from playload.bin, and then install it on QPST
Yuukino said:
You can decompress the ROM and extract the img scene from playload.bin, and then install it on QPST
Click to expand...
Click to collapse
I'm sorry but what program or app should i use to extract from payload.bin?Thank you for your help.
moomlufi said:
I'm sorry but what program or app should i use to extract from payload.bin?Thank you for your help.
Click to expand...
Click to collapse
You can download the tool at this link to extract the playload .bin, the apk is mobile, zip is the PC side, you can create a project in the tool, and drag the playload .bin into the project folder, then select Extract Bin, you can get all the IMGs
Yuukino said:
You can download the tool at this link to extract the playload .bin, the apk is mobile, zip is the PC side, you can create a project in the tool, and drag the playload .bin into the project folder, then select Extract Bin, you can get all the IMGs
Click to expand...
Click to collapse
Thank you, I managed to do it with with the tool provided. But, I wanted to ask: Should I load the images to both a slot and b slot or choose one only?
moomlufi said:
Thank you, I managed to do it with with the tool provided. But, I wanted to ask: Should I load the images to both a slot and b slot or choose one only?
Click to expand...
Click to collapse
only slot_a
Yuukino said:
only slot_a
Click to expand...
Click to collapse
Thank you, I did as you said, and managed to load all images, but, i am on the LineageOS Logo it has been like 20 minutes, is it normal?
moomlufi said:
Thank you, I did as you said, and managed to load all images, but, i am on the LineageOS Logo it has been like 20 minutes, is it normal?
Click to expand...
Click to collapse
you need install stock R
Yuukino said:
you need install stock R
Click to expand...
Click to collapse
I had stock rom installed i was on android 10, do i need to install it again? if so, can you please provide me a link with a place to download the stock rom? I'm so sorry this is my 1st time doing this on lg g8
moomlufi said:
I had stock rom installed i was on android 10, do i need to install it again? if so, can you please provide me a link with a place to download the stock rom? I'm so sorry this is my 1st time doing this on lg g8
Click to expand...
Click to collapse
I'm sorry, but you'll have to find STOCK R yourself, but before that you can try reboot to recovery and then Format Data
Having same issue as user above. Tried installing from twrp but Lineage hangs on boot image. Tried going back to stock then flashing with qfil same issue.
starboi4eva said:
Having same issue as user above. Tried installing from twrp but Lineage hangs on boot image. Tried going back to stock then flashing with qfil same issue.
Click to expand...
Click to collapse
u need reboot to recovery ，Check if the slot is a or b. If it is a, please try Format Data (please backup your data). If it is b, please switch to slot_ a
Yuukino said:
u need reboot to recovery ，Check if the slot is a or b. If it is a, please try Format Data (please backup your data). If it is b, please switch to slot_ a
Click to expand...
Click to collapse
Already back on 12 but I did try formatting data in recovery, also notice I was on slot b so I also flashed the files to both slot a and b but still no boot.
BSG google cam's latest version is working if anyone is having issues with the other/older versions (org.codeaurora.snapcam is the package I used):
BSG: MGC_8.8.224_A11_V5
Download MGC_8.8.224_A11_V5 by BSG.
www.celsoazevedo.com
Also having issues installing, attempted twice from stock android 10 rom. Once using twrp, the second time from QFIL. Used payload dumper to extract img files from the payload in the zip, but still hangs on the boot screen.
Related
Hi, I installed TWRP recovery on my XT1068 and in preparation for lollipop update I would like to flash stock recovery. The problem is I can`t find stock recovery.img anywhere on XDA or internet. So am I bad at searching files or do I have to extract it from factory image?
recovery.img and boot.img in .zip
hi to all
how can we flash these zip files to install stock recovery...???
thank you
htcgr said:
hi to all
how can we flash these zip files to install stock recovery...???
thank you
Click to expand...
Click to collapse
The same way you flashed twrp.
Extract the .zip
Boot into fastboot mode
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
Stupid question but...
Where do I place these files? In my external sd card????
mykkomax said:
Where do I place these files? In my external sd card????
Click to expand...
Click to collapse
No. Keep it on your pc. If you are using windows, put it into the same folder where your fastboot.exe resides. On Linux it doesn't matter.
BO4573 said:
recovery.img and boot.img in .zip
Click to expand...
Click to collapse
only problem here is what versions?
kitkat for xt1068 has 3 versions of recoveries
KXB21.85-14
KXB21.85-23
KXB21.85-27
SO YOU NEED TO LOOK IN ABOUT PHONE IN SETTINGS TO FIND YOUR VERSION
attached ALL 4 current XT1068 stock recoveries (3 Kitkat, 1 Lollipop)
Kitkat
View attachment KXB21.85-14-Recovery.img.zip
View attachment KXB21.85-23-Recovery.img.zip
View attachment KXB21.85-27-Recovery.img.zip
Lollipop
View attachment LXB22.46-28-Recovery.img.zip
I see
doppelhelix said:
No. Keep it on your pc. If you are using windows, put it into the same folder where your fastboot.exe resides. On Linux it doesn't matter.
Click to expand...
Click to collapse
Thank you so much!
reefuge said:
only problem here is what versions?
kitkat for xt1068 has 3 versions of recoveries
KXB21.85-14
KXB21.85-23
KXB21.85-27
SO YOU NEED TO LOOK IN ABOUT PHONE IN SETTINGS TO FIND YOUR VERSION
attached ALL 4 current XT1068 stock recoveries (3 Kitkat, 1 Lollipop)
Kitkat
View attachment 3150006
View attachment 3150008
View attachment 3150015
Lollipop
View attachment 3150016
Click to expand...
Click to collapse
After selecting which version, would input the same code as above yeah?
mykkomax said:
Thank you so much!
After selecting which version, would input the same code as above yeah?
Click to expand...
Click to collapse
Code:
fastboot flash recovery KXB21.85-14-Recovery.img
fastboot flash recovery KXB21.85-23-Recovery.img
fastboot flash recovery KXB21.85-27-Recovery.img
or
fastboot flash recovery LXB22.46-28-Recovery.img
only need to use correct one!
reefuge said:
Code:
fastboot flash recovery KXB21.85-14-Recovery.img
fastboot flash recovery KXB21.85-23-Recovery.img
fastboot flash recovery KXB21.85-27-Recovery.img
or
fastboot flash recovery LXB22.46-28-Recovery.img
only need to use correct one!
Click to expand...
Click to collapse
Thank you so much! Appreciate the help.
Finally, is this how it should appear on the window...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A good sign yes?
mykkomax said:
Thank you so much! Appreciate the help.
Finally, is this how it should appear on the window...
View attachment 3150346
A good sign yes?
Click to expand...
Click to collapse
that is how it should look, you should also watch your phone screen and seem similar in yellow writing
reefuge said:
View attachment 3150008
Click to expand...
Click to collapse
I flashed recovery KXB21.85-23 from your link in order to do the OTA lollipop update but the update failed.
Then I downloaded Firmware KXB21.85.23 (DSDS ALL) from your thread http://forum.xda-developers.com/moto-g-2014/general/windows-tool-moto-g-2014-xt1068-dual-t2983295 , extracted recovery.img and flashed it. And with that recovery OTA update worked fine.
Does the recovery that you linked in your answer come from a different firmware version?
Anyway, I hope this will help someone find the right stock recovery. And thanks for sharing the stock firmware!
rurku said:
I flashed recovery KXB21.85-23 from your link in order to do the OTA lollipop update but the update failed.
Then I downloaded Firmware KXB21.85.23 (DSDS ALL) from your thread http://forum.xda-developers.com/moto-g-2014/general/windows-tool-moto-g-2014-xt1068-dual-t2983295 , extracted recovery.img and flashed it. And with that recovery OTA update worked fine.
Does the recovery that you linked in your answer come from a different firmware version?
Anyway, I hope this will help someone find the right stock recovery. And thanks for sharing the stock firmware!
Click to expand...
Click to collapse
could be the UK .23 recovery - but this method outdated now see my signature for easy installer
Hi
could you link download file of this recovery image (21.85.23) not UK edition, here?
majhool_yf said:
could you link download file of this recovery image (21.85.23) not UK edition, here?
Click to expand...
Click to collapse
here you go
Thanx alot!
I tried it and it was about 10 minutes installing but at the end it shows an error and installation abort,does it need another thing like boot image to flash?!
If not what should i do?
majhool_yf said:
Thanx alot!
I tried it and it was about 10 minutes installing but at the end it shows an error and installation abort,does it need another thing like boot image to flash?!
If not what should i do?
Click to expand...
Click to collapse
its not TWRP installable you have to flash via fastboot, you asked for recovery.img not a installer, extract and manual flash
reefuge said:
its not TWRP installable you have to flash via fastboot, you asked for recovery.img not a installer, extract and manual flash
Click to expand...
Click to collapse
Im doing via OTA and i flashed fastboot recovery(u gave).and now the phone is in restart loop...
majhool_yf said:
Im doing via OTA and i flashed fastboot recovery(u gave).and now the phone is in restart loop...
Click to expand...
Click to collapse
ENTER RECOVERY and delete cache/ data / factory reset
my easy installer in signature was made for this reason, so it automatically wipes before install, to avoid dirty flash boot loops
Disclaimer: No guarantees. Follow at your own risk. I am not responsible for bricked phones.
Credits to 4PDA
Prerequisites:
Knowledge of OEM unlocking from Developer options, adb, and fastboot
Knowledge of QPST in case you encounter bootloop, so you can revert to a reliable stock ROM
Unlocked bootloader (from here)
1) Get your bootloader unlocked, if you haven't already.
- Visit https://www.zui.com/iunlock
- Enter the IMEI1 (Second number when you call *#06# with the phone)
- Enter the Device ID from the Bootloader/Fastboot (Hold VOL- and Power, while device is off)
- Enter your email and captcha and set the checkmark to acknowledge voiding your warranty.
- If you get an error saying that your IMEI1 is wrong, put in a sim card and wait a few hours. If it still doesn't work, write an email to [email protected]
- In the developer settings in android, enable usb debugging and oem unlock.
- Flash the sn.img file you receive with fastboot (again, hold vol- and power while the device is off). Command is 'fastboot flash unlock sn.img'. You need compatible usb drivers, qualcom drivers and adb/fastboot to do that. Use google or write me a PM if you have trouble with that.
- execute 'fastboot oem unlock-go'
- This allows you to use fastboot to flash custom system/boot/vendor/vbmeta images
Click to expand...
Click to collapse
@wzsx150's recovery-TWRP-3.3.1-1015-LENOVO_Z5S-CN-wzsx150.img MEGA Google Drive
@wzsx150's TWRP for Android 10 TWRP-3.3.2B-0508-LENOVO_Z5S-10.0-CN-wzsx150-fastboot.7z (extract the IMG file and flash using fastboot)
3) Now you can flash TWRP.
- Download ...
- Flash it from the Bootloader with 'fastboot flash recovery recovery-TWRP-3.3.1-1015-LENOVO_Z5S-CN-wzsx150.img'
- Press VOL UP / VOL DOWN to navigate to recovery.
Click to expand...
Click to collapse
11.3.169: L78071_11.3.169_DEV_FullOTA.zip
11.5.096 Update: ZUI_11.3.169_DEV_TO_ZUI_11.5.096_ST.zip
11.5.111 Update: ZUI_11.5.096_TO_ZUI_11.5.111_ST.zip
Other files, use at your own risk
Disable_Dm-Verity_ForceEncrypt_08.18.2019.zip
Official TWRP for jd2019
In recovery, Format data, then wipe Dalvik/ART Cache, Cache, Data
Reboot to recovery
Install in order, without rebooting, 11.3.169 -> 11.5.096 Update -> 11.5.111 Update.
Install Magisk 20.4
Install TWRP for Android 10 (above) using fastboot if the update replaces stock recovery after rebooting
Edited out from original
Wipe Data and flash Disable_Dm-Verity_ForceEncrypt_08.18.2019.zip
In order not to encrypt Data in the future, install Official TWRP immediately after installing updates. Install > Install Image > twrp-3.3.1-0-jd2019.img
Install GApps
Note: I do not know if the 11.5 update relocks the bootloader. It doesn't lock the bootloader.
I had bootloop from OpenGApps. 4PDA post advises to use BiTGApps. You can install Google Play Store from the built-in Lenovo App Center and that's what I did.
Haven't tried disabling dm-verity and forceencrypt.
Good job, my man, I'll check it out tonight and prepare ourselves an updateable package for people coming from any rom to avoid the hassle of going through all of that. As soon as I get it working will release a new TWRP for Android 10.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
carlshark said:
View attachment 5036881
Click to expand...
Click to collapse
Nice job man, so the update works as it should? I'm patching the images and will upload a full ota update to make it easier to move between Pie and 10. Regarding recoverys, did you test any twrp? Any decryption working? What about this official twrp, does it actually work? Thanks for the files man, this will make everything much easier
jacoghi said:
Nice job man, so the update works as it should? I'm patching the images and will upload a full ota update to make it easier to move between Pie and 10. Regarding recoverys, did you test any twrp? Any decryption working? What about this official twrp, does it actually work? Thanks for the files man, this will make everything much easier
Click to expand...
Click to collapse
I've been using the phone on 11.5.111 for a couple of days now.
I flashed both the 3.3.2 TWRP of @wzsx150 and the official TWRP and they seem to be working. I didn't turn off encryption so it seems to work well.
Happy to have helped in a small way. Thank you for your hard work!
links not works
vesdan said:
links not works
Click to expand...
Click to collapse
Thanks for the heads up, apparently the original poster removed the links. Will be uploading the ones I used.
Reuploading done.
Thank you very much
Thanks for the rom my friend.
Can you please upload the latest update cause i am rooted and it cannot be installed via the system.
Also guys ,does anyone knows if i can put the latest android 10 with multilanguage rom ?Thank you for everything ,i appreciate.
thx for the post, i am wondering if the ota will be avaliable, because the bootloader unlock site does not approve my imei number
sorry guys, i rushed and flashed the gapps and now facing a bootloop, i prepared qpst and a stock rom but i verz rom i am missing a content.xml file, can anyone please help me?
galardo_2 said:
sorry guys, i rushed and flashed the gapps and now facing a bootloop, i prepared qpst and a stock rom but i verz rom i am missing a content.xml file, can anyone please help me?
Click to expand...
Click to collapse
https://mega.nz/folder/PegDDQ7I#bmCCIt1lAWAe7ui_gkmwSQ/folder/fOAQ1QCa
here is many ROMS
Do not install gapps on ZUI !!!!
vesdan said:
https://mega.nz/folder/PegDDQ7I#bmCCIt1lAWAe7ui_gkmwSQ/folder/fOAQ1QCa
here is many ROMS
Do not install gapps on ZUI !!!!
Click to expand...
Click to collapse
but the qpst app need an aditional content.xml file, where can i get one
Install global via fastboot, all is included or in qfil ROM is all in zip file
vesdan said:
Install global via fastboot, all is included or in qfil ROM is all in zip file
Click to expand...
Click to collapse
I tried and failed again
i tired and failed again
galardo_2 said:
thx for the post, i am wondering if the ota will be avaliable, because the bootloader unlock site does not approve my imei number
Click to expand...
Click to collapse
I tried unlocking 2 Lenovo phones. The first attempt had sent me an email, but the second attempt did not. The unlock procedure went through though. So I tried changing the link provided in the first email http://cdn.zui.lenovomm.com/developer/lenovoboot/xxxxxxxx/sn.img (xxxxxxxx - serial number of phone) and it worked. This might not work for you though.
As for the OTA, I really am not sure... Probably
carlshark said:
I tried unlocking 2 Lenovo phones. The first attempt had sent me an email, but the second attempt did not. The unlock procedure went through though. So I tried changing the link provided in the first email http://cdn.zui.lenovomm.com/developer/lenovoboot/xxxxxxxx/sn.img (xxxxxxxx - serial number of phone) and it worked. This might not work for you though.
As for the OTA, I really am not sure... Probably
Click to expand...
Click to collapse
after a few atempts (3-4 days) the imei number got accepted, but now i have another problem as you can see, i flashed the gapps and now i have the bootloop and i dont have a clue how to undone it
hello friends I have all the updates installed, but it tells me that there is a new one, where can I download it?
On the other hand, what difference is there between installing by twrp and qfill?
galardo_2 said:
i tired and failed again
Click to expand...
Click to collapse
This is problem with program, drivers sahara. Try fastboot
There is afwul closed source twrp made by xinkid520. It has very dangerous bug, if you switch slot your device will be bricked, and the only way to repair is paid authorized account (btw do not pay more than 15$ whatsoever, it's a ripoff).
[TWRP] [venus] TWRP Recovery for Mi 11
REMOVED! Use this instead : https://forum.xda-developers.com/t/recovery-11-official-teamwin-recovery-project.4374109/
forum.xda-developers.com
I made a small mod to fix this.
Now it has default language by default (English) and that button was removed.
That jerk did not upload the sources, the changes were made only in the xml files, so there should not be any new bugs
Installation is the same as in original thread
Archive is .7z, but xda didn't allow this extension so i renamed it to .rar
Before and after
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
megapro17 said:
There is afwul closed source twrp made by xinkid520. It has very dangerous bug, if you switch slot your device will be bricked, and the only way to repair is paid authorized account (btw do not pay more than 15$ whatsoever, it's a ripoff).
[TWRP] [venus] TWRP Recovery for Mi 11
REMOVED! Use this instead : https://forum.xda-developers.com/t/recovery-11-official-teamwin-recovery-project.4374109/
forum.xda-developers.com
I made a small mod to fix this.
Now it has default language by default (English) and that button was removed.
That jerk did not upload the sources, the changes were made only in the xml files, so there should not be any new bugs
Installation is the same as in original thread
Archive is .7z, but xda didn't allow this extension so i renamed it to .rar
Before and after
View attachment 5401889View attachment 5401891
Click to expand...
Click to collapse
Just a suggestion, why you don't share this file or put the link of this thread in the other thread, it will be useful for more people.
SubwayChamp said:
Just a suggestion, why you don't share this file or put the link of this thread in the other thread, it will be useful for more people.
Click to expand...
Click to collapse
Hmm, okay
megapro17 said:
Hmm, okay
Click to expand...
Click to collapse
Usefull, i'm here because of the link on the other thread
Thanks for your version !
megapro17 said:
There is afwul closed source twrp made by xinkid520. It has very dangerous bug, if you switch slot your device will be bricked, and the only way to repair is paid authorized account (btw do not pay more than 15$ whatsoever, it's a ripoff).
Click to expand...
Click to collapse
False ! the first time i try twrp, i switch the slot and yes my device was bricked. I just flash the engenering rom and reflash a global rom. my phone is working without paid .
Pikaone41 said:
False ! the first time i try twrp, i switch the slot and yes my device was bricked. I just flash the engenering rom and reflash a global rom. my phone is working without paid .
Click to expand...
Click to collapse
However you will agree it's a good fix for prevent mistake/issue
Can this twrp flash China dev rom pro? rom file larger than 4Gb
Pikaone41 said:
False ! the first time i try twrp, i switch the slot and yes my device was bricked. I just flash the engenering rom and reflash a global rom. my phone is working without paid .
Click to expand...
Click to collapse
How did you flashed engenering rom? I tried it, it required authorization anyway. Maybe your device wasn't completely bricked, not in 9008 mode?
Hi, I can't seem to copy any roms to my Mi 11 with TWRP, windows refuses to even start to try and copy and when i try to copy from my note 20 it gets to 99% and then fails?
skyler13 said:
Hi, I can't seem to copy any roms to my Mi 11 with TWRP, windows refuses to even start to try and copy and when i try to copy from my note 20 it gets to 99% and then fails?
Click to expand...
Click to collapse
flash from usb otg. this twrp is bad
Hi, how can I change to this fixed recovery from the original? Any mini tutorial?
Thanks in advance
neo9596 said:
Hi, how can I change to this fixed recovery from the original? Any mini tutorial?
Thanks in advance
Click to expand...
Click to collapse
From your actual TWRP > Install > (on bottom right) install image > choose new twrp > Reboot > Recovery
or from adb like the first time :
Code:
fastboot boot twrp-venus-fixed.img
Oh, so easy! Thanks. And I need to select inject again or no?
Thanks for your time
megapro17 said:
flash from usb otg. this twrp is bad
Click to expand...
Click to collapse
yeah i've already tried that but twrp doesn't see the usb otg for some reason, managed to fix it after an hour of searching. the method adb push rom.zip /sdcard didn't work but someone suggested adb push rom.zip /data and this has allowed me to copy the rom to my phone and flash it now.
Has anyone tried out this person's twrp
GitHub - LittleTurtle2333/android_device_xiaomi_venus-twrp: TWRP device tree for Xiaomi Mi 11
TWRP device tree for Xiaomi Mi 11. Contribute to LittleTurtle2333/android_device_xiaomi_venus-twrp development by creating an account on GitHub.
github.com
Pho3nX said:
From your actual TWRP > Install > (on bottom right) install image > choose new twrp > Reboot > Recovery
or from adb like the first time :
Code:
fastboot boot twrp-venus-fixed.img
Click to expand...
Click to collapse
What image to flash should i choose then 'Boot' ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or your getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
Supported Models:
Galaxy A71 SM-A715F, SM-A715U, SM-A715U1, SM-A715V and SM-A715W.
US/Canada bootloader unlock thread:
here
Download & Guide:
1. Unlock your bootloader.
2. Download A71: a71.
3. Reboot to download mode and flash vbmeta_disabled.tar in AP slot and reboot. Device will reboot to stock recovery mode prompting you to wipe data so wipe data and reboot to download mode again.
4. Put the TWRP tar for your device with Odin in the AP slot and click start.
5. Reboot to recovery via recovery key combo.
6. Disable encryption:
- Go to Advanced > Terminal, type: multidisabler.If vendor complain about free space left on device, will attempt to resize vendor. and it ask to - Run multidisabler again!.- Type: multidisabler again. will see - Finished. when done.7. Go back to Wipe > Format Data > type yes.
8. Reboot to recovery.
9. Flash magisk apk in twrp.
10. Reboot to system, Enjoy.
Note:
To disable encryption manually:
You need to replace fileencryption=ice with encryptable=ice only in userdata line (maybe rest lines) in vendor/etc/fstab.qcom
To avoid stock recovery restoration manually:
Rename system/recovery-from-boot.p to recovery-from-boot.p.bak
Click to expand...
Click to collapse
Support:
Live support is available via #twrp on Freenode with your IRC client or just click this link.
Telegram:
Link
Bugs:
- Encryption not fully working.
Thanks:
TWRP team
@ianmacd for multidisabler
Sources:
Kernel tree
Device tree
Changelog:
GitHub History
after unlock bootloader and root, fingerprint doesnt work.
how to fix it ?
thank you in advance
kevin mitnick said:
after unlock bootloader and root, fingerprint doesnt work.
how to fix it ?
thank you in advance
Click to expand...
Click to collapse
Dont use Ian multidisabler.
afaneh92 said:
Dont use Ian multidisabler.
Click to expand...
Click to collapse
I reflashing rom and reflashing twrp and not used ian multidisabler. but fingerprint still not fixed. please help
kevin mitnick said:
I reflashing rom and reflashing twrp and not used ian multidisabler. but fingerprint still not fixed. please help
Click to expand...
Click to collapse
Try this vbmeta disabler https://drive.google.com/file/d/1-4K--sTHhGY9ekmKd_oiaP0eoGrD4vAf/view?usp=drivesdk
afaneh92 said:
Try this vbmeta disabler https://drive.google.com/file/d/1-4K--sTHhGY9ekmKd_oiaP0eoGrD4vAf/view?usp=drivesdk
Click to expand...
Click to collapse
thank you sir..
I flashed this file, but still ask calibration for finger print and not fixed.
kevin mitnick said:
thank you sir..
I flashed this file, but still ask calibration for finger print and not fixed.
Click to expand...
Click to collapse
So other twrp recoveries are ok?
afaneh92 said:
So other twrp recoveries are ok?
Click to expand...
Click to collapse
I tried your twrp and ian recovery..still same..
Flashing The Twrp on Odin is ok. But when i flash using twrp with zip or img. Always showing in Red error.. reading flashin error..
alpher17 said:
Flashing The Twrp on Odin is ok. But when i flash using twrp with zip or img. Always showing in Red error.. reading flashin error..
Click to expand...
Click to collapse
post recovery log
kevin mitnick said:
I tried your twrp and ian recovery..still same..
Click to expand...
Click to collapse
still working on a fix
Sorry i forgoten my firm version is A715FXXS6BUI1 . Is not supported?
alpher17 said:
Sorry i forgoten my firm version is A715FXXS6BUI1 . Is not supported?
Click to expand...
Click to collapse
should be ok
afaneh92 said:
still working on a fix
Click to expand...
Click to collapse
I bought another a71 mainboard and the problem is still same. finger print need calibration. is that software or hardware problem ? finger print work well before unlock bootloader
kevin mitnick said:
I bought another a71 mainboard and the problem is still same. finger print need calibration. is that software or hardware problem ? finger print work well before unlock bootloader
Click to expand...
Click to collapse
I think disabling encryption broke it. This doesn't effect US devices only international variants on specific models.
afaneh92 said:
I think disabling encryption broke it. This doesn't effect US devices only international variants on specific models.
Click to expand...
Click to collapse
my device is a715fxx.
so, how to fix it ?
please help
kevin mitnick said:
my device is a715fxx.
so, how to fix it ?
please help
Click to expand...
Click to collapse
I cant help you now, as I said above still working on it. dont spam the thread.
@afneh92
afaneh92 said:
I cant help you now, as I said above still working on it. dont spam the thread.
Click to expand...
Click to collapse
Can you help me with something?
I have the TWRP 3.5.1 [ianmacd] recovery installed and a custom Samsung ROM (NcX 3.1.2).
I want to flash the stock firmware via odin to keep the ROM up to date (though without losing data, by flashing the HOME_CSC file).
I'll need to flash TWRP again to install Magisk and Root later via Odin as even though it wont format my data, it will flash on top of my current TWRP.
To install yours, what steps should i follow after i flash the Stock ROM again? (Remember that i wont lose data/need to encrypt the phone again)?
Pupet_Master said:
@afneh92
Can you help me with something?
I have the TWRP 3.5.1 [ianmacd] recovery installed and a custom Samsung ROM (NcX 3.1.2).
I want to flash the stock firmware via odin to keep the ROM up to date (though without losing data, by flashing the HOME_CSC file).
I'll need to flash TWRP again to install Magisk and Root later via Odin as even though it wont format my data, it will flash on top of my current TWRP.
To install yours, what steps should i follow after i flash the Stock ROM again? (Remember that i wont lose data/need to encrypt the phone again)?
Click to expand...
Click to collapse
There is 90% chance to lose data, make data backup move it to PC then try.
Note1: changing vbmeta will lose data so must flash same file.
Note2: if you disabled encryption need to do again.
Ignoring note 1&2 then rebooting to system will lose data
Hi Guys!
Since there is no deeptest.apk available for our device to unlock bootloader, we came up with another method to unlock bootloader unofficially!
In this guide I'll tell you how to unlock bootloader, root with magisk and flash TWRP on your Realme 8i/Narzo 50 (RMX3151/RMX3286)
Code:
/*
* This Guide is tested and working
* However I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about unlocking and flashing TWRP
* before flashing it! YOU are choosing to make these modifications.
*/
1. UNLOCKING BOOTLOADER:
Requirements
PC or Laptop
Internet connection
Realme 8i/Narzo 50
USB cable
Working Brain
Take a backup of your data since it'll be wiped
Go to About phone > Version and tap build number 7 times
Go to Settings > advanced settings > Developer options and turn on OEM unlocking and USB debugging
STEPS
Install Python from windows store
Install USBDk
Download this and extract : https://github.com/bkerler/mtkclient/archive/refs/heads/main.zip
Download vbmeta and patched boot image (Download for your respective version) in copy to the mtkclient-main folder
Now open command prompt or powershell in that folder
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now type pip3 install -r requirements.txt and hit enter
Now type python mtk e metadata,userdata,md_udc hit enter - This command wipes data
Then power off your phone and hold both volume buttons and connect usb cable (DON'T LEAVE THE BUTTONS, KEEP THEM HOLDING THROUGHOUT THE PROCESS) - This boots device into BROM mode
Now type python mtk da seccfg unlock This will unlock the bootloader (If you face waiting for device issue then unplug the device and plug in the device again with holding volume buttons, also don't leave the buttons)
After this unplug your phone and turn it on (It'll show your device dm verity corrupted and first boot might take 20-25 mins, don't panic)
Now your bootloader is unlocked
Due to realme's limitations you still can't access fastboot after unlocking via this method
2. ROOTING YOUR DEVICE:
Install This Magisk apk
Now in pc type python mtk w boot,vbmeta boot.patched,vbmeta.img.empty hit enter
Then power off your phone and connect usb while holding both volume buttons (and don't leave them)
Now disconnect and reboot phone
Now open magisk
3. FLASHING TWRP RECOVERY:
Download TWRP - From here
Download and install Flashify app
Open Flashify and grant root permission
Select Recovery image and install the twrp you have downloaded
After flashing is done click reboot now or you can reboot to recovery via magisk app
"Congrats Now we have working TWRP in our Realme 8i/Narzo 50"
Credits:
Me (@pritish1998) for TWRP, Unlock and Flashing guide
B Kerler fot MTKClient
Rohit for testing
Stock boot Images (to revert root)
If you face any issues contact me here
Thanks for the detailed guide, hope we get kernel sources soon..
sany.svenson said:
Добрый вечер.А как теперь заблокировать загрузчик,подскажите пожалуйста.
Click to expand...
Click to collapse
English is required, you can use your native language too, adding it to your post.
Inside the tool is provided a README.md file with basic instructions and usage. To relock bootloader you can use python mtk xflash seccfg lock just be careful to not relock it while running custom binaries, you have to return completely back to stock prior to do that.
After using boot.img from this topic wifi is dead! Now I need original boot to patch it. My firmware is A20. Somebody help!
DimaS_EKB said:
After using boot.img from this topic wifi is dead! Now I need original boot to patch it. My firmware is A20. Somebody help!
Click to expand...
Click to collapse
The provided boot image is from A30... Why are u still using A20?
I didn't know about A20 or A30 or anything. You should have mentioined this! Better off dump user's own boot.img and patch it with magisk. Now I have problems. It is good that I've found A20 firmware but it was not easy, I've lost a lot of time to read about firmwares, patching etc.
DimaS_EKB said:
I didn't know about A20 or A30 or anything. You should have mentioined this! Better off dump user's own boot.img and patch it with magisk. Now I have problems. It is good that I've found A20 firmware but it was not easy, I've lost a lot of time to read about firmwares, patching etc.
Click to expand...
Click to collapse
Download stock boot image from here I've saved them https://mega.nz/folder/BvpwibLB#lDDAbRG5SMKS4ucdj1dELg
Also there is nothing to mention at the time of making this guide almost everyone was updated to A.30, but no problem now I've updated the link for all patched boot images
recovered, thanks
now I'm updating to A32
what's next?
download your patched boot image for A32? and that's all?
DimaS_EKB said:
recovered, thanks
now I'm updating to A32
what's next?
download your patched boot image for A32? and that's all?
Click to expand...
Click to collapse
Yes
pritish1998 said:
Yes
Click to expand...
Click to collapse
Sorry but it appears I cannot update. I tried original and modified boot.img, also I installed original recovery. It doesn't help. The phone downloads the A32 firmware, reboots and cannot start recovery mode to update the firmware.
DimaS_EKB said:
Sorry but it appears I cannot update. I tried original and modified boot.img, also I installed original recovery. It doesn't help. The phone downloads the A32 firmware, reboots and cannot start recovery mode to update the firmware.
Click to expand...
Click to collapse
Flash stock boot, vbmeta and recovery then format data then reboot
If I flash stock vbmeta it cannot boot. Is that ok? Should I erase data anyway?
DimaS_EKB said:
If I flash stock vbmeta it cannot boot. Is that ok? Should I erase data anyway?
Click to expand...
Click to collapse
Yes
pritish1998 said:
Yes
Click to expand...
Click to collapse
Format data
Thanks! Now everything works fine!
pritish1998 said:
Download stock boot image from here I've saved them https://mega.nz/folder/BvpwibLB#lDDAbRG5SMKS4ucdj1dELg
Also there is nothing to mention at the time of making this guide almost everyone was updated to A.30, but no problem now I've updated the link for all patched boot images
Click to expand...
Click to collapse
how to flash stock boot image?
bobongros said:
how to flash stock boot image?
Click to expand...
Click to collapse
python mtk w boot boot.img
pritish1998 said:
python mtk w boot boot.img
Click to expand...
Click to collapse
can i dm you? please help me my phone is bricked
bobongros said:
can i dm you? please help me my phone is bricked
Click to expand...
Click to collapse
How did your phone brick?