Related
Hi someone with an account on 4dpa with 30 posts could please download this rom and share it here? I don't know Russian so it's impossible for me to write 30 posts.
I have a Zenfone Go (Z00VD) and the stock ROM it's terrible (crash in the camera, 1 Gigabyte of app space already full....)
In case you can't, could you provide an alternative ROM with as less bugs as possible?
Thank you
Original Thread 4pda
Translated Google
Guess we're on the same boat buddy. Have you tried the other ROMs on their forum like the nougat ones? They seem nice.
I personally prefer to use the RR 5.5.9 lollipop rom provided by 4pda since for some reason the nougat and marshmallow roms on their site just give me bootloops. It may be different for you though.
JustAnormalGuy said:
Guess we're on the same boat buddy. Have you tried the other ROMs on their forum like the nougat ones? They seem nice.
I personally prefer to use the RR 5.5.9 lollipop rom provided by 4pda since for some reason the nougat and marshmallow roms on their site just give me bootloops. It may be different for you though.
Click to expand...
Click to collapse
Hi, not yet, it's not my phone so I'm searching a stable ROM. I saw the nougat thread here but it's not very clear what works and what not, there seems to be a nougat rom on 4dpa which should work well except the videocamera with the stock app, but the Oreo one seems almost bug free although more complex to install. Unfortunately I can't access it.
Hello,
From what I can tell, both Oreo and Nougat ROMs were unstable and/or sluggish for me, so I'd recommend to stick to Marshmallow based ROMs(for now). My personal preference is ResRemix 5.7.4, but if you decide to try any of them, keep in mind that ROMs with kernel 3.18.19(as far as I've seen most of ROMs in that thread) all have these two issues that I was able to find so far:
Notification LED doesn't work
Bluetooth audio doesn't work either
Other than that, the ROM is super-stable and somehow better than 5.1.1 ROMs from official dev thread there.
And for JustAnormalGuy, bootloops in later ROMs seem to happen because of unwiped internal storage(basicly needs entire /data partition wiped somewhy). Try marking the 'Internal SD' option when wiping partitions for ROM installing.
Good luck!
aurismat said:
Hello,
From what I can tell, both Oreo and Nougat ROMs were unstable and/or sluggish for me, so I'd recommend to stick to Marshmallow based ROMs(for now). My personal preference is ResRemix 5.7.4, but if you decide to try any of them, keep in mind that ROMs with kernel 3.18.19(as far as I've seen most of ROMs in that thread) all have these two issues that I was able to find so far:
Notification LED doesn't work
Bluetooth audio doesn't work either
Other than that, the ROM is super-stable and somehow better than 5.1.1 ROMs from official dev thread there.
And for JustAnormalGuy, bootloops in later ROMs seem to happen because of unwiped internal storage(basicly needs entire /data partition wiped somewhy). Try marking the 'Internal SD' option when wiping partitions for ROM installing.
Good luck!
Click to expand...
Click to collapse
Those 2 bugs are not a deal breaker for me, would you mind linking to the ResRemix 5.7.4 rom that you used?
Sure, buut since I can't post links(thanks XDA for 10 post restriction, love ya!), I'll have to send one another way.
PM me your Discord handle(if you have one) or something else. I should be able to send you the link there.
aurismat, and what version of twrp do you use ?
I use TWRP 3.0 by Jemmini. It's been a *long* time since I installed it though, so if you have something different, I'm afraid I won't be of much help unless I'll be able to pull my recovery .img file.
Actually, i use the same version. Problem is most probably my method of root. The common method of rooting for our device didn't include any flashing with sp flash tool. But for my situation, my bootloader is locked even after downgrading. So i did the other method (also found on the forum) in which includes flashing.
Hmm, it *may* be the root method, may be also the locked bootloader.
If I recall right(and this might be THE common way), I used the fastboot method from XDA, and I knew it'd work cause I rooted more phones that way. I remember downgrading the stock ROM down to version 39(i think that one still had the bootloader check in dev options) and then trying to unlock the bootloader and obviously go through flashing the recovery image.
Dunno what might be the issue with your way of flashing, though. AFAIK might be anything from leftover files to bootloader giving the finger.
@aurismat i think the problem might be that i used the "format all + download" option on sp flash tool. Does that affect the phone in any way that deprives my phone from using 6.0 - 7.0 roms? (Besides the "null" imei effect)
@JustAnormalGuy I don't think it should be a problem, because the ROM .zips install their own stuff to the partitions AFAIK, so even if Flashtool wipes everything, it should still be fine. Try doing one of them ROMs(previously said ResRemix worked for me), but remember to wipe the Internal Storage partition if you can.
Oh and remember to take a backup of your current ROM, should it bootloop again at least you won't have to do the hassle of reinstalling everything back(learned that the hard eay haha).
EDIT: was it just Nougat ROMs that you were trying or was it both Nougat and Marshmallow? Not sure what might be the cause, but the ROMs developed under the same kernel from ska-vova in 4PDA worked for me. Just a thought.
well actually i already tried various roms from Marshmallow to Nougat all of which gave me bootloops. I've already followed the steps of installation as written. However, i tried once installing a Marshmallow rom from the facebook group named "ASUS Zenfone Go Indonesia" and it surpisingly worked for me (numerous bugs present however), as well as most of the marshmallow (and only marshamallow roms) on their group.
The thing is I also might think one of the reasons why i get the bootloops in the roms from the 4pda forum is the kernel used in them. (just speculation) Should it be correct to assume that ?
As I recall:
Working rom shows "kernel version > [email protected]"
Not working rom - "kernel version > [email protected]"
Hmm, I'm using [email protected] kernel version 3.18.19.
All the ROMs there seem to be by mosly nik-kst's kernel. ska-vova seems to just build ROMs with the kernel.
Besides, take note from the working ROM - it's also from 4PDA.
Only thing I can speculate is that your device is somewhat different(maybe different hardware, not sure) and hence why it gives you BLs.
Dunno, this case is a tough cookie to be honest - only thing I can recommend at this point is to flash literally EVERYTHING back to stock and try using fastboot method to get recovery and root back.
Hey @Darkorn,
Over the span of a few days, I've tried installing 4PDA's Oreo ROM.
It took me a good couple of headaches to make out what translated Russian meant in the instructions, but I've managed to repartition the entire device to the guide.
Seems to work properly so far, hell even Bluetooth and Notification LED issues from older ROMs seem to be fixed!
Though one thing that annoys me *personally* is that it's impossible to install SuperSU, so you're stuck with Magisk. It's not the end of the world, though, as long as you don't care about SafetyNet's BS.
Oh and @JustAnormalGuy, try repartitioning your device according to the Oreo instructions in 4PDA, that might be the solution for ya.
If I ever get up to 10 posts I'll ask those guys permission to let me post the tutorial here with all the links(hopefully).
Until then, good luck to both of ya!
aurismat said:
Hey @Darkorn,
Over the span of a few days, I've tried installing 4PDA's Oreo ROM.
It took me a good couple of headaches to make out what translated Russian meant in the instructions, but I've managed to repartition the entire device to the guide.
Seems to work properly so far, hell even Bluetooth and Notification LED issues from older ROMs seem to be fixed!
Though one thing that annoys me *personally* is that it's impossible to install SuperSU, so you're stuck with Magisk. It's not the end of the world, though, as long as you don't care about SafetyNet's BS.
Oh and @JustAnormalGuy, try repartitioning your device according to the Oreo instructions in 4PDA, that might be the solution for ya.
If I ever get up to 10 posts I'll ask those guys permission to let me post the tutorial here with all the links(hopefully).
Until then, good luck to both of ya!
Click to expand...
Click to collapse
Nice! Resurrection Remix is working too well to bother, but who knows in a few months!
That would be great man, thanks !!
I've been having loads of issues with installing Treble ROMs. Currently I'm on the PRA-LX1's most recent update with EMUI 8, (C432) and have only recently found out that Askuccio's TWRP is around. Previously I've been trying and trying with TWRPs like Haky86's which couldn't have even worked because it's built for EMUI 5, I've tried Pretoriano's for the P10 lite, as well as some other random one which is Chinese. Pretoriano's is always unable to mount my /storage/ or /system/ and therefore I can't wipe or flash anything properly, and the chinese one just placed me in a bootloop after flashing the Treble RR ROM.
I now have the Askuccio TWRP and I need to know before I try again - will I get a bootloop, or get in a mess all over again? I can't back anything up beforehand because of encryption and inability to root before switching to a custom ROM. The last times I've tried I've had to keep booting and messing around until eRecovery manages to reproduce itself from seemingly nothing and then redownloads my system firmware again.
Has anyone had proper success? Do you recommend any ROMs to use? I'd prefer RR, Lineage or Omni but at this point anything is fine. Thanks
I'm in the same boat as you. I have had many phones and rooted them all, but somehow the help on this forum lacks detail and consistency. I also have the TWRP installed but can't get any further down the line - where is the root? Can't install custom roms, can't get adaptive SD, just got unlocked bootloader and FWP!
Hi guys, I have an SM-N960F dual sim exynos Note 9 and i have recently discovered this whole other element of ROM flashing known as project treble ROMs. I tried to flash a few different ones and i could only get one to work and the rest all just either bootlooped or stayed on the initial splashscreen. I was wondering if anybody could shed some light on them a bit for me and perhaps knew exactly the best way to flash them, and what firmware is best to start on beforehand etc? I found the whole thing EXTREMELY confusing especially with venfor images and kernel images etc...
Thank you for any input/help!
We can't really use the term Project Treble when talking about Samsung phones. Technically it is implemented, but Samsung being Samsung, it's quite a non-standard implementation and not really compatible with anything else.
oddbehreif said:
We can't really use the term Project Treble when talking about Samsung phones. Technically it is implemented, but Samsung being Samsung, it's quite a non-standard implementation and not really compatible with anything else.
Click to expand...
Click to collapse
Ive flashed a few of them onto my phone but it seems to be a bit of hit and miss as to whether they boot up or not. The ones that do have been good in terms of the size and speed etc, I even flashed a generic copy of OneUI which worked well.
I am on Pie base using the Dr.Ketan rom, so I tried a few GSIs which are supposed to be compatible with Pie base. I took them from here.
The way I flash them is:
1. Factory reset from TWRP
2. Flash the GSI as system image
3. Flash stock kernel otherwise you will be stuck on boot logo or you will get into bootloop. To flash the stock kernel I just use Dr.Ketan's rom, because the UI upon flashing allows you to choose and flash stock kernel and skip everything else.
(They mention that we should flash Permissiver also, but it gives error so I can't flash it)
So those GSIs boot up, but they are barely usable. The "System is finishing update" and "System setup will start soon" are stuck for me and never finish. Also for example in the PixelExperience9 from this collection I was not even able to add my Google account because of the system auto-closing almost all system apps that I try to open.
It might be that these things should be done in a different way, but this is my experience for now. So..... back to Dr.Ketan ROM. I was really hoping to get the MIUI GSI as daily, but it seems impossible to me.
EDIT: Lol I realised we are the same people talking on the other thread also, so you gave me the link to the treble collection.
Hello everyone, try to install several custom roms, there is no tutorial that explains how the rom and twrp are installed. There are many tutorials and they all contradict, some say do this, others say do the other, but all fail.
Twrp boot, flash rom, install custom rom on SLOT A, install TWRP on slot B.
PROVEN ROMS:
PixelExperience:
Very low call volume, impossible to fix.
LineageOS:
Does not start play store, does not allow login to accounts, does not allow to install gapps.
- CURRENT ROM--
Evolution X:
Does not start play store, does not allow login to accounts.
I have been installing customs roms for years and this device is costing me my life. HELP
The most users get in trouble with A/B devices because they don't know exactly the differences between A-only and A/B partitions.
You don't know how to install TWRP? Why? On twrp.me you can find a detailed instruction for every single model.
A custom ROM is always a .zip file and you can flash a .zip file via TWRP. If you flash a ROM while slot _a is set as active you will install the ROM on slot _b. That's all. That is the meaning of semless updates.
Every new ROM must contain a own boot.img. A new boot.img will delete TWRP and Magisk. TWRP is a recovery and A/B devices don't have own partition for recovery. The recovery is merged in the boot partition.
Also Magisk uses the boot.img to patch the ramdisk. Flashing a new boot.img means you override the patched ramdisk with a new own. As a result you need a new Magisk installation.
my recommendation is starting from scratch with a clean stock 10 install then trying again...
lineage wiki probably has the best install instructions https://wiki.lineageos.org/devices/lake/install but also check its forum thread https://forum.xda-developers.com/g7-plus/development/rom-lineageos-17-1-t4076569 for other recommendations . if you want evolution X read the instructions in its thread https://forum.xda-developers.com/g7-plus/development/rom-evolution-x-4-1-69-moto-g7-plus-t4081731 as well but there pretty much the same.... you've probably went threw those threads already based upon you saying you have tried 3 diff roms already, but try again from a clean install of stock 10 (IF you want to run a 10 rom). i know it's not really a "clean/easy/simple" solution/tutorial, but with this device there is some trial and error for getting a half assed working install. however MAKE SURE you are on a stock 10 rom when installing a 10 rom, pixel experience is a 9 rom and that could be part of your problem. moving from android 10 stock, to a 9 rom, then back to a 10 rom will lead to issues. or a 9 rom, to a 10 rom, without moving to stock 10 in between will lead to problems.
as this isnt nearly a widely adopted device, custom rom development and support isnt even close to other devices, so expect bugs. i've always ran cfw's on all my devices ever since the htc g1/dream days, this is my first device i've stuck with stock due to the lack of rom development, lack of widespread use and people actually wanting to use cfw and users to bug report, and stock being more stable... but your mileage may vary. also no disrespect meant towards the hard working dev's who do work on this device, keep it up.
Thank you very much, I feel lucky that you have responded so quickly, sometimes my messages I post in this forum are never answered. Right now I am with revolution X:
--- It has TWRP perfectly installed, it has the boot.img patched with Magisk without any error and rooted perfectly, but google play for more than clean and reinstall it never opens, it does not allow me to login to the accounts, the APPs they close alone, etc.
I will try to put the stock and again but I have very little hope. thanks, again¡¡
prodigy90 said:
Thank you very much, I feel lucky that you have responded so quickly, sometimes my messages I post in this forum are never answered. Right now I am with revolution X:
--- It has TWRP perfectly installed, it has the boot.img patched with Magisk without any error and rooted perfectly, but google play for more than clean and reinstall it never opens, it does not allow me to login to the accounts, the APPs they close alone, etc.
I will try to put the stock and again but I have very little hope. thanks, again¡¡
Click to expand...
Click to collapse
yeah it seems to be pretty finicky getting a good install and gapps seem to have issues. reading all the posts in the lineage17 thread just make me cringe. as much as i'd love to use lineage as my daily driver (or evo X) my days of willing to put up with a buggy rom and daily dirty flashing have come and gone. this was my first, and will be my last, moto device for the the simple fact it just doesnt have the user base and its development is stunted, compared to more widely used devices.
i hope you get something working, the lineage17 thread definetly has some good advice on what people have done to get a working install, should be able to apply flash order etc to a evoX install (minus having to install gapps for evoX)
solved
I managed to perfectly install the Stock Rom with the following tool:
Lenovo MOTO Smart Assistant, a real wonder, simply select the model and in fastboot, immediately install the factory rom.
download.lenovo.com/consumer/mobiles/lmsa_v4.5.0.14_setup.exe
prodigy90 said:
I managed to perfectly install the Stock Rom with the following tool:
Lenovo MOTO Smart Assistant, a real wonder, simply select the model and in fastboot, immediately install the factory rom.
download.lenovo.com/consumer/mobiles/lmsa_v4.5.0.14_setup.exe
Click to expand...
Click to collapse
yup, the LMSA is a great tool for sure. glad you got back to a clean stock install.
I got my device yesterday and today i have been trying to flash legion os 2.11 but i always keep getting error 7 even tried by installing global rom through mi flash tool but still got error 7 from twrp and oxfox both.
Can someone just guide me clearly on flashing roms on this k20 pro.
Currently i using global miui 11 11.0.4.0 rom but want to try other custom roms as well..
Ezio553 said:
I got my device yesterday and today i have been trying to flash legion os 2.11 but i always keep getting error 7 even tried by installing global rom through mi flash tool but still got error 7 from twrp and oxfox both.
Can someone just guide me clearly on flashing roms on this k20 pro.
Currently i using global miui 11 11.0.4.0 rom but want to try other custom roms as well..
Click to expand...
Click to collapse
Try the latest TWRP from here.
https://forum.xda-developers.com/k2...icial-twrp-xiaomi-redmi-t3944363/post79823568
If you still get the same problem, report back in this thread.
Robbo.5000 said:
Try the latest TWRP from here.
https://forum.xda-developers.com/k2...icial-twrp-xiaomi-redmi-t3944363/post79823568
If you still get the same problem, report back in this thread.
Click to expand...
Click to collapse
yeah finally the twrp 3.4 unofficial worked fine from global miui 11 rom i wiped everything and flashed indian vendor-firmware file and then flashed rom with fcrypt zip file nd worked fine...
Thanks for suggesting this file i was using youtube videos as guide and everyone was using oxfox or older twrp..
Ezio553 said:
yeah finally the twrp 3.4 unofficial worked fine from global miui 11 rom i wiped everything and flashed indian vendor-firmware file and then flashed rom with fcrypt zip file nd worked fine...
Thanks for suggesting this file i was using youtube videos as guide and everyone was using oxfox or older twrp..
Click to expand...
Click to collapse
I've got a bit more time to reply now.
OFox is really designed to be used with MIUI. The majority of it's extra features are specific to running MIUI. I would only recommend it if you decide to stick with MIUI in the long run.
The TWRP I pointed to is from the dev who maintains the official TWRP for our device. The unofficial version you've installed is identical to the official version, but with the TWRP app removed. If you intend to stick with custom ROMs, I recommend you stick with TWRP from mauronofrio.
If you prefer to have your phone encrypted, then there was no need to flash fcrypt/DFE. There are a small number of users that continue to insist that we need to disable encryption, but it is not needed.
Having the phone unencrypted does make life a little easier when flashing, but if you prefer the security and want to know about living with an encrypted phone, reply back and I'll give you more details.
Robbo.5000 said:
I've got a bit more time to reply now.
OFox is really designed to be used with MIUI. The majority of it's extra features are specific to running MIUI. I would only recommend it if you decide to stick with MIUI in the long run.
The TWRP I pointed to is from the dev who maintains the official TWRP for our device. The unofficial version you've installed is identical to the official version, but with the TWRP app removed. If you intend to stick with custom ROMs, I recommend you stick with TWRP from mauronofrio.
If you prefer to have your phone encrypted, then there was no need to flash fcrypt/DFE. There are a small number of users that continue to insist that we need to disable encryption, but it is not needed.
Having the phone unencrypted does make life a little easier when flashing, but if you prefer the security and want to know about living with an encrypted phone, reply back and I'll give you more details.
Click to expand...
Click to collapse
I tried Legion Os which is Aosp based and it installed fine but then i tried Masik X 16 which again said this isn't for your device so had to make changes in updater script then it flashed fine.
Also i would like to know about decryption of storage and would it cause any issues in flashing roms again nd again..
Ezio553 said:
I tried Legion Os which is Aosp based and it installed fine but then i tried Masik X 16 which again said this isn't for your device so had to make changes in updater script then it flashed fine.
Also i would like to know about decryption of storage and would it cause any issues in flashing roms again nd again..
Click to expand...
Click to collapse
If you want to be permanently decrypted, then you will not have any problems flashing ROMs. However, whenever you need to update the vendor and firmware, you will also need to flash the DFE script again.
If you want to be encrypted, then the best thing to do, every time you flash, is to temporarily remove encryption by removing all lockscreen security just before flashing, then once you've finished, restore encryption by adding back lockscreen security. However, if you restore MIUI, then choose to go to another custom ROM, you will need to format the data partition when flashing over MIUI, even if you've removed lockscreen security first.
Robbo.5000 said:
If you want to be permanently decrypted, then you will not have any problems flashing ROMs. However, whenever you need to update the vendor and firmware, you will also need to flash the DFE script again.
If you want to be encrypted, then the best thing to do, every time you flash, is to temporarily remove encryption by removing all lockscreen security just before flashing, then once you've finished, restore encryption by adding back lockscreen security. However, if you restore MIUI, then choose to go to another custom ROM, you will need to format the data partition when flashing over MIUI, even if you've removed lockscreen security first.
Click to expand...
Click to collapse
Ok that means going from miui to aosp & vice versa - format data needed.
So this should similarly apply to all Miui based roms like xiaomi.eu or masik x or it is just for stock miui.
Ezio553 said:
Ok that means going from miui to aosp & vice versa - format data needed.
So this should similarly apply to all Miui based roms like xiaomi.eu or masik x or it is just for stock miui.
Click to expand...
Click to collapse
As far as I know, you only need to format data when flashing over official MIUI. I don't know the details, but it is my understanding that encryption on MIUI does not follow standard practice, which is why it it's necessary to format data when flashing over MIUI. I don't believe this issue exists with MIUI based custom ROMs, or when reverting back to MIUI.
Though, there may be occasions, when flashing from one AOSP ROM to another, and the phone is encrypted, when you may get a bootloop. In this case booting to TWRP and formatting data, will fix the problem. This is why I earlier recommended temporarily removing lockscreen security, if you choose to have an encrypted phone, even though this is a rare occurrence.
Robbo.5000 said:
As far as I know, you only need to format data when flashing over official MIUI. I don't know the details, but it is my understanding that encryption on MIUI does not follow standard practice, which is why it it's necessary to format data when flashing over MIUI. I don't believe this issue exists with MIUI based custom ROMs, or when reverting back to MIUI.
Though, there may be occasions, when flashing from one AOSP ROM to another, and the phone is encrypted, when you may get a bootloop. In this case booting to TWRP and formatting data, will fix the problem. This is why I earlier recommended temporarily removing lockscreen security, if you choose to have an encrypted phone, even though this is a rare occurrence.
Click to expand...
Click to collapse
Thanks for the info.
I tried custom miui rom and well flashing dfe worked fine so i think its just for official miui.