[ROM] ★★★ XPERIA UI ROM 4.2.2 ★★★ | ULTRA LIGHT|, a ROM for the GiONEE M2
This rom is a free, community built, aftermarket firmware distribution of Android 4.2 (JB), which is designed to increase performance and reliability over stock Android for your device.
Click to expand...
Click to collapse
Code:
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
Installation:
Enter CTR Recovery
Take A BackUp of the current ROM you are using.
Now, Wipe Data/Factory Reset.
Wipe Dalvik Cache Advanced Options
Flash the rom
reboot and enjoy
DOWNLOAD LINK
Code:
https://mega.co.nz/#!yYNlRSKI!D9AotWQ4eS5owvvPn3LpTWPOAvo82laaXQeBBdT-g3k
Note:-
This is still in Beta Phase but i have tried my best to check/test the ROM but still don't expect it to be a bugless ROM though it is good enough to use as a daily driver
Click to expand...
Click to collapse
IF YOU LIKE MY WORK DON'T SAY JUST PRESS THANKS BUTTON
screen shots :
great work gionee rocks and arnab rockss
thanks bro u rocks too
Good one. needs more tweaking.
First of all, I salute the efforts of the person re-building this rom for Gionee M2.
I was fascinated by its great looks and interface. I could not remove it, but I had to.
Because, my magnetic sensor and digital compass sensors are not awake in this ROM. Somehow, I can not navigate without this functionality.
I loved the interface vary much but With all pain :crying: , I reverted back to my old, boring ROM.
If you tell me how to correct this, or if you can just pack the User interface and theme into a ne Upadate.zip I will be glad to remember your help. As the kitkat update is fast approaching for Gionee M2 (Sept 5th), I hope, I can use it (UI update zip) in that version as well.
:good:
Any bugs in this...i want to install this rom!plz tell me if it hav any bugs?Tnx
---------- Post added at 08:02 PM ---------- Previous post was at 07:57 PM ----------
Is both cameras working?3g on both sims?
Related
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
What is working:
- Everything (WI-Fi, GPS, NFC, mobile data, signal strength etc.)
Known issues:
- Gallery and Music won't recognize external sdcard unless you press the "Refresh" button.
Download miuiandroid_lang_C5503-3.11.1.zip
This has multilanguage support, and it supports emoji as well.
Do NOT use LBE Guard app, use Permissions app in Security folder.
Install instructions:
- Wipe data and cache
- Install miuiandroid_lang_C5503-3.X.X.zip
- REBOOT
- Flash gapps from here: miuiandroid_gapps-4.2.2-small_signed-8012.zip
XDA:DevDB Information
MIUI v5, a ROM for the Sony Xperia ZR
Contributors
datagutt, Cyanogenmod team, FreeXperia, Xiaomi, MIUIAndroid, iBotPeaches, Zdunex25, bmarko82
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: MIUIAndroid GNEX build and CyanogenMod
Version Information
Status: Testing
Current Beta Version: 3.11.1
Created 2013-09-14
Last Updated 2013-11-07
based on stock？ or cm？
Based on CM 10.1.
datagutt said:
Based on CM 10.1.
Click to expand...
Click to collapse
Flashed Testing now! :good:
EDIT:
ROM is very smooth. It's Beautiful!!
BUGS:
The headset/headphones are not detected at all! Tried the crappy Sony Headset, it would not detect a headphone being connected at all. Music plays through speaker only
The camera app can take pictures at maximum resolution of 5MP only!
The ROM is pretty heavy on the battery.
The carrier name in settings always crashed.
Oh, i will make sure to fix headset. Camera should be the same as CM one, is it a problem there as well?
Mine has OK battery, not the best but it gets me through the day.
datagutt said:
Oh, i will make sure to fix headset. Camera should be the same as CM one, is it a problem there as well?
Mine has OK battery, not the best but it gets me through the day.
Click to expand...
Click to collapse
The camera can capture at a maximum resolution of 5MP only, even in the camera settings the maximum resolution is 5MP, whereas in CM10.1, the maximum resolution is 13MP.
The battery life is now better after hours of burning in the new ROM. ROM's quite intrusive at first but one gets used to it, Overall it's very smooth.
Edit: I have posted a picture of the camera app settings where the max resolution is 5MP.
I forgot to replace the camera with the CM one. If you use Gallery2.apk from 10.1 13MP will be max resolution.
Will fix in next release.
Thanks.
I'm currently on FXP but I'd love to see and support devs to port more ROMs/mods/kernels into XZR and make it more knowable.
Thumbs up for your good work
datagutt said:
I forgot to replace the camera with the CM one. If you use Gallery2.apk from 10.1 13MP will be max resolution.
Will fix in next release.
Click to expand...
Click to collapse
I uninstalled both MiGallery.apk and Gallery2.apk and installed GalleryGoogle.apk and camera is working great now; 13 mp, photosphere, panaroma, HDR all working.
Sent from my C5503 using xda app-developers app
status 7 error
datagutt said:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
What is working:
- Everything (WI-Fi, GPS, NFC, mobile data, signal strength etc.)
Known issues:
- Gallery and Music won't recognize external sdcard unless you press the "Refresh" button.
]miui_datagutt_3.9.13_dogo.zip
This has multilanguage support, and it supports emoji as well.
Do NOT use LBE Guard app, use Permissions app in Security folder.
Install instructions:
- Wipe data and cache
- Install miui_datagutt_3.X.X_dogo.zip
- REBOOT
- Flash gapps from here: miuiandroid_gapps-4.2.2-small_signed-8012.zip
XDA:DevDB Information
MIUI v5, a ROM for the Sony Xperia ZR
Contributors
datagutt, Cyanogenmod team, FreeXperia, Xiaomi, MIUIAndroid, iBotPeaches, Zdunex25, bmarko82
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: MIUIAndroid GNEX build and CyanogenMod
Version Information
Status: Testing
Current Beta Version: 3.9.13
Created 2013-09-14
Last Updated 2013-09-14
Click to expand...
Click to collapse
I get status error when installing with updater-script with the line assert prop, after i deleted that line and installed the rom ,it installed but after restarting the phone, it is blank, no display, i had to flash offical rom back to stock to mak it working. wat am i doing wrong
I have a c5502 xperia zr with 4.1.2 rom rooted and cwm , with locked bootloader
This ROM requires unlocked bootloader, because it uses CM-kernel.
datagutt said:
This ROM requires unlocked bootloader, because it uses CM-kernel.
Click to expand...
Click to collapse
if I unlock my phone will I lose walkman drm, Sony sound settings enhancement?? , if there is a way to gt it bak do let me knw
Use this tool _BEFORE_ you unlock bootloader: http://forum.xda-developers.com/showthread.php?t=2292598
thanks
datagutt said:
Use this tool _BEFORE_ you unlock bootloader: http://forum.xda-developers.com/showthread.php?t=2292598
Click to expand...
Click to collapse
thanks for your help, it is very good rom, except for the headset issue, hope there is a fix to it now. i dont want to remove the rom, its awsome
New build has been posted. No differences except updated MIUI base, i am still trying to fix the headset issue
Has anyone tried it yet and does it offer any performance improvement over official 4.2.2, any benchmarks?
is the headphone problem fixed in the new update ?????
johndaniel said:
is the headphone problem fixed in the new update ?????
Click to expand...
Click to collapse
Hello,
Just tried the latest build. Headphones are not detected but the camera can take pictures up to 12.8Mp.
I think I'm gonna go back to a stock rom until the headphones bug is solved.
Anyway thanks a lot for the rom !
[email protected]
Has anyone successfully tried it on C5502?
I tried it and despite unlocked bootloader, flashed boot.img from archive (CWM works well, clean install, wiped everything several times) ... ended stuck during first boot on MIUI logo.
datagutt said:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
What is working:
- Everything (WI-Fi, GPS, NFC, mobile data, signal strength etc.)
Known issues:
- Gallery and Music won't recognize external sdcard unless you press the "Refresh" button.
Download miuiandroid_lang_C5503-3.10.11.zip
This has multilanguage support, and it supports emoji as well.
Do NOT use LBE Guard app, use Permissions app in Security folder.
Install instructions:
- Wipe data and cache
- Install miuiandroid_lang_C5503-3.X.X.zip
- REBOOT
- Flash gapps from here: miuiandroid_gapps-4.2.2-small_signed-8012.zip
XDA:DevDB Information
MIUI v5, a ROM for the Sony Xperia ZR
Contributors
datagutt, Cyanogenmod team, FreeXperia, Xiaomi, MIUIAndroid, iBotPeaches, Zdunex25, bmarko82
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: MIUIAndroid GNEX build and CyanogenMod
Version Information
Status: Testing
Current Beta Version: 3.9.20
Created 2013-09-14
Last Updated 2013-09-27
Click to expand...
Click to collapse
Can Miui do an home automatic landscape ?
This rom is a free, community built, aftermarket firmware distribution of Android 4.2 (JB), which is designed to increase performance and reliability over stock Android for your device.
Code:
Pure STOCK AOSP By Shivam Bhalla
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
First time installing to your GIONEE M2, or coming from another ROM:
- Make sure you're running a proper working CWM TWRP or CTR -- Click HERE if you dont have.
- Copy ZIPs to your SDCard
- Boot into Recovery
- Flash zip from SDCard
- Reboot
DOWNLOAD SECTION
CLICK HERE
About Jelly Bean ROM 4.2.2:
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: PURE STOCK AOSP
Version Information
Status: Stable
Current Stable Version: 1.0.0(Pure Stock AOSP)
Stable Release Date: 07-04-2014
Screenshots
Few Screenshots :victory:
Reserved for future
Are you able to develop a kernel or port one ? if yes then we could port some kitkat goodness to the m2 which gionee obviously wont be giving us !!
Awesome work there. I am using this ROM. Excellent excellent excellent. No issues no bugs so far.
Sent from my M2 using Tapatalk
Is this ROM still running stably for those who had installed it in April?
Front Camera Issue
I am getting error when using front camera. It comes as camera not connected. Any work around? Please help. The rest of the ROM is amazing and smooth.
I even tried with different camera applications. Same issue.
Request
Please list out common fixes and workaround as well.
For instance I got IMEI Invalid after installing this Rom. Then I went back to stock backed up EFS using Mobile Uncle and restored it back after installing AOSP again.
Second issue is the front camera...
Please help..
BUG:
BUG: Front Camera Does Not Work
BRO AOSP wi fi not working
Shivam Bhalla said:
Few Screenshots :victory:
Click to expand...
Click to collapse
i have pressed Thanks button everything is good but My wifi is not working properly
it will connect to WiFi but not recieving any data
if i open my browser, it is showing that ''check your network or Internet connection''
plzz plzzz plzzz help Shiva Bhalla thanks for this Rom
---------- Post added at 07:31 AM ---------- Previous post was at 07:27 AM ----------
hi Gionee M2
guyz here is the Whats group for Gionee M2
please send your number to Number 8867674075
i will add you to this group it is going help you all lot
or
post your number in this thread
or
text me private
thank you All
Bro ur ROM is awosome but there are some bugs I find after using 1day of this ROM...like front camera not working....and brightness is set to zero level l....if it set automatically.. In day it go just blank .boot logo sound is taken from takken game its feels sometime irritating the whites theme not good its make hard for some time ...doesn't feel good ...I already hit thanks for ur effort for making this ROM.............plz dev prodive us a upgraded version of this ROM...it gonna very m2 ROM if these bugs are fixed....
@Shivam Bhalla where is its device tree or moderator will close this thread as it does not under GPL
Hi, I installed aosp rom in my gionee m2 mobile but there imei problem. How should I sort it out. I tried from mobile uncle tool, emi randomiser but unable to fix it please help
This rom is a free, community built, aftermarket firmware distribution of Android 4.2 (JB), which is designed to increase performance and reliability over stock Android for your device.
Code:
Lewa OS Version 5 By Shivam Bhalla
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
First time installing to your GIONEE M2, or coming from another ROM:
- Make sure you're running a proper working CWM TWRP or CTR -- Click HERE if you dont have.
- Copy ZIPs to your SDCard
- Boot into Recovery
- Flash zip from SDCard
- Reboot
DOWNLOAD SECTION
CLICK HERE
About Jelly Bean ROM 4.2.2:
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: LEWA OS 5
Version Information
Status: Stable
Current Stable Version: 1.0.0
Stable Release Date: 07-04-2014
Screenshots
Few Screenshots :victory::good:
Reserved for future
Now downloading..
Hi Shivam
Great Work... ROM is butter smooth and works perfectly. I noticed one small issue... the Super User access is by default granted even if we turn off the permissions from security center. In short any application that requests super user access is granted with out any notification. Nevertheless not an issue exactly but considering the amount of viruses that Android has it could pose a threat some day.
Does anyone have a mirror on MEGA for this ROM? It's extremely slow to download off Dev Host.
Every time I restart the phone, i have to log into all the apps like Facebook and email. Any idea why this is happening?
Sent from my M2 using XDA Free mobile app
Everyone Check This
Discussion And Development Thread For Gionee M2
http://forum.xda-developers.com/showthread.php?p=52846249
Installation aborted Gionee M2
Shivam Bhalla said:
This rom is a free, community built, aftermarket firmware distribution of Android 4.2 (JB), which is designed to increase performance and reliability over stock Android for your device.
Code:
Lewa OS Version 5 By Shivam Bhalla
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
First time installing to your GIONEE M2, or coming from another ROM:
- Make sure you're running a proper working CWM TWRP or CTR -- Click HERE if you dont have.
- Copy ZIPs to your SDCard
- Boot into Recovery
- Flash zip from SDCard
- Reboot
DOWNLOAD SECTION
CLICK HERE
About Jelly Bean ROM 4.2.2:
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: LEWA OS 5
Version Information
Status: Stable
Current Stable Version: 1.0.0
Stable Release Date: 07-04-2014
Click to expand...
Click to collapse
bro
i havw installed Mobile uncle tool and made process as you said above
but while going to install custom Rom zip.file it is not installing
saying that installation Aborted
plzzz help bro
play store not working
after install on my gioneem2 play not working always shows connection time out
its solved but front cam not working
New custom ROM added for gionee m2 ..here
Also complete process of root ,cwm
http://forum.xda-developers.com/showthread.php?t=2822910
lewa is multilanguage?
thank you
amit.akon said:
bro
i havw installed Mobile uncle tool and made process as you said above
but while going to install custom Rom zip.file it is not installing
saying that installation Aborted
plzzz help bro
Click to expand...
Click to collapse
bro.. the possible reason for this is.. ur recovery is nt updated to latest version... for this reason this error might happen.. i have suffered such kind of issue
Any bugs in this rom?Can i install it after kitkat update on gionee
Front Camera Not Working On lewa Os 5... plz tell me what to do... thnx in advance
[ROM] ★★★ AXER V3.0 ROM 4.2.2 ★★★ | ULTRA LIGHT|, a ROM for the GiONEE M2
this rom is a free, community built, aftermarket firmware distribution of android 4.2 (jb), which is designed to increase performance and reliability over stock android for your device.
Click to expand...
Click to collapse
* i am not responsible for bricked devices, dead sd cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. You are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, i will
* laugh at you.
Click to expand...
Click to collapse
FEATURES OF THE ROM
1.fully tweaked
2.deodexed the rom for ui tweaking
3.full kitkat icon
4.kitkat style status bar
5.kitkat style ui
6.transparent dialer
7.transparent settings
8.new audio mod viper added
9.now feel the beat
10.compass fully working (fixed) (tested)
11.light rom only 250mb
12.root explore added
13.pre-rooted rom
14.heavy ini.d tweaked
15.build.prop tweaks
16.bravia engine added
17.many more can't remember
Click to expand...
Click to collapse
DOWNLOAD LINK:=== https://docs.google.com/file/d/0BxU9whdfpASRUXEwemdYLWR1UlU/edit?usp=docslist_api
Click to expand...
Click to collapse
for camera use this
Click to expand...
Click to collapse
HTML:
http://forum.xda-developers.com/showthread.php?t=2391694
GUYS ONE REQUEST TO ALL USER OF GIONEE M2, I CREATED THIS ROM AFTER MANY HOURS OF WORK,BEFORE TAKING AS A BASE LET ME KNOW ,I WILL SOON ADD A THEME ZIP U CAN USE IT IN UR ROM ***WITH PROPER CRDIT***
Click to expand...
Click to collapse
how to set dpi value?
Click to expand...
Click to collapse
:silly:
HTML:
https://drive.google.com/file/d/0BxU9whdfpASRVnVfUmZ1TzhqMDg/edit?usp=sharing
how to set viper4android ?
HTML:
https://drive.google.com/file/d/0BxU9whdfpASRQ1JCTWxPOUp6eVU/edit?usp=sharing
if you like my work don't say just press thanks button
Port SamFlareV5
Plz port SamFlare V5 to Gionee M2...
Here is the link for SamFlare V5 http://forum.xda-developers.com/showthread.php?t=2530755
Kalpesh Sharma said:
Plz port SamFlare V5 to Gionee M2...
Here is the link for SamFlare V5 http://forum.xda-developers.com/showthread.php?t=2530755
Click to expand...
Click to collapse
thanks for ur post ,but its different chipset i can't port it bro
SEND FROM GIONEE M2 USING AXER V3.0
Bro Plz Port This ROM as it is of same chipset...
Bro can u port Fusion ROM of Canvas 2.2 to Gionee M2 because it is of same chipset... Here is the link http://thebroodle.com/micromax/fusion-rom-for-mmx-a114/
Kalpesh Sharma said:
Bro can u port Fusion ROM of Canvas 2.2 to Gionee M2 because it is of same chipset... Here is the link http://thebroodle.com/micromax/fusion-rom-for-mmx-a114/
Click to expand...
Click to collapse
ok bro i will try
SEND FROM GIONEE M2 USING AXER V3.0
Bro does this rom have any camera by default? Could you release a version with a camera baked in?
Sent from my M2 using XDA Premium 4 mobile app
Bro ur ROM is awosome but there are some bugs I find after using 10min of this ROM...like front camera not working....and brightness is set to zero level like shivam bhalla ROM ....if it set automatically.. In day it go just blank also sometime apps manager running apps closed suddenly ....I already hit thanks for ur effort for making this ROM..........sound is its best level ..not find such good any other ROM.....plz dev prodive us a upgraded version of this ROM...it gonna best m2 ROM if these bugs are fixed....
Kitkat update now available for giinee m2 from 5 september 2014
http://gionee.co.in/gcafe/discussion/19/guide-upgrading-gionee-m2-to-android-4-4-kitkat
Camera link down... Pls anyone with link re-upload...
Regarding ROM poting
arnabgharay said:
ok bro i will try
SEND FROM GIONEE M2 USING AXER V3.0
Click to expand...
Click to collapse
Dear Bro,
Is there any success of porting fusion ROM ? Its very nice with amazing UI......
Please do so for this rom...
[Q&A] [ROM][CM11][Kitkat -4.4.4][PORT][UNOFFICIAL] CyanogenMod 11 v0.13 For Canvas
Q&A for [ROM][CM11][Kitkat -4.4.4][PORT][UNOFFICIAL] CyanogenMod 11 v0.13 For Canvas Turbo
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][CM11][Kitkat -4.4.4][PORT][UNOFFICIAL] CyanogenMod 11 v0.13 For Canvas Turbo. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Unable to find "Install zip from sdcard" option on recovery
Thanks a lot for the Mod.
I am using Micromax canvas turbo A250.
I am not able to find "Install zip from sdcard" option when I reboot my Micromax Canvas Turbo A250 to recovery. Do I need to do anything extra to get that option?
Would like to get help from people who have done this already.
Santhosh M said:
Android 4.4.3 KitKat for Canvas Turbo has arrived.
Say thanks to @chrmhoffmann for compiling the first ever CM11 for MT6589.
ORIGINAL THREAD: http://forum.xda-developers.com/show....php?t=2676086
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is an aftermarket firmware for a number of cell phones based on the open-source Android operating system. It offers features not found in the official Android based firmwares of vendors.
What works:
- SIM1 for phone calls (incoming/outgoing) and SMS, data (2g, 3g)
- SIM2 is a WIP
- Audio (microphone - now also outside phone calls, loudspeaker, headphones)
- Sensors
- Wifi (not wifi direct)
- GPS (no A-GPS yet nor EPO assist files, so the fix can take a bit)
- hw composer
- wifi and usb tethering
- battery usage stats (expect the usage for Display to be very unprecise)
- candy crush, facebook and twitter
What doesn't work, known bugs:
- 2nd sim card 3G switch, Dual SIM is a WIP, not fully there yet
- re-enable after flightmode broken
- camera does not work ( Will be fixed soon )
- (hw) video en/decoding not enabled
- bluetooth not available
- FM radio not available
- A-GPS does not work, GPS works though but slowish
DOWNLOAD LINKS:
CM 11 v 0.13
GAPPS
OLDER VERSIONS
CM11 V0.7
INSTRUCTIONS:
Place the zip files in sdcard.
Reboot to recovery
Wipe data/factory reset.
Wipe dalvik Cache.
Install cm11.zip and gapps.
Reboot!
CREDITS:
@chrmhoffmann For bringing the first ever CM11 for an MT6589 device. (THANK HIM IN HIS ORIGINAL THREAD).
OmniROM project
@Xplodwild
@Dr-Shadow
@pawitp
@dhacker29
@kashifmin for his support and guidance
@Xenon1978 for his support & @saurabh2012 for testing.
@suhas.holla for his help
Sources:
Kernel: https://github.com/sandymanu/CM11_a250_kernel
Device: https://github.com/chrmhoffmann/andr..._wiko_stairway
Android: https://gerrit.omnirom.org/#/q/topic:mt6589,n,z - more to come
XDA:DevDB Information
[ROM][CM11][Kitkat -4.4.4][PORT][UNOFFICIAL] CyanogenMod 11 v0.13 For Canvas Turbo, ROM for the Micromax Canvas Turbo A250
Contributors
Santhosh M
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 0.13
Beta Release Date: 2014-06-12
Created 2014-06-12
Last Updated 2014-08-13
Click to expand...
Click to collapse
vivganes said:
Thanks a lot for the Mod.
I am using Micromax canvas turbo A250.
I am not able to find "Install zip from sdcard" option when I reboot my Micromax Canvas Turbo A250 to recovery. Do I need to do anything extra to get that option?
Would like to get help from people who have done this already.
Click to expand...
Click to collapse
I think you are trying to install from stock recovery ! U should install a custom recovery. ( U need CWM/TWRP recovery). Get it from general thread and find procedure there
Could not be able to boot CM v0.17 after flashing the rom. Struck on micromax logo. Flashing the rom is successful but not booting. Don't know why. Have tried many time. Still strucks on micromax logo.
sai.suri1983 said:
Could not be able to boot CM v0.17 after flashing the rom. Struck on micromax logo. Flashing the rom is successful but not booting. Don't know why. Have tried many time. Still strucks on micromax logo.
Click to expand...
Click to collapse
You didn't follow all installation steps